Bluetooth radio
Bluetooth classic
Feature |
Sub feature |
88W8987 |
IW416 |
IW611/IW612 |
RW610/RW612 |
AW611 |
---|---|---|---|---|---|---|
General features |
Bluetooth Class 1.5 and Class 2 support |
Y |
Y |
Y |
N |
Y |
General features |
Scatternet support |
Y |
Y |
Y |
N |
Y |
General features |
Maximum of seven simultaneous ACL connections – Central links |
Y |
Y |
Y |
N |
Y |
General features |
Automatic packet type selection |
Y |
Y |
Y |
N |
Y |
General features |
Bluetooth - 2.1 to 5.0 specification support |
Y |
Y |
Y |
N |
Y |
General features |
Low power sniff |
Y |
Y |
Y |
N |
Y |
General features |
Deep sleep using out-of-band |
Y |
Y |
N |
N |
N |
General features |
Wake on Bluetooth (SoC to host) |
Y |
Y |
Y |
N |
Y |
General features |
Independent reset (in-band)[^1] |
Y |
Y |
Y |
Y |
Y |
General features |
Independent reset (out-band)[^1] |
Y |
Y |
N |
N |
N |
General features |
Firmware download (parallel)[^1] |
Y |
Y |
N |
N |
N |
General features |
RF test mode |
Y |
Y |
Y |
N |
Y |
Bluetooth packet type supported |
ACL (DM1, DH1, DM3, DH3, DM5, DH5, 2-DH1, 2-DH3, 2-DH5, 3-DH1, 3-DH3, 3-DH5) |
Y |
Y |
Y |
N |
Y |
Bluetooth packet type supported |
SCO (HV1, HV3) |
Y |
Y |
Y |
N |
Y |
Bluetooth packet type supported |
eSCO (EV3, EV4, EV5, 2EV3, 3EV3, 2EV5, 3EV5) |
Y |
Y |
Y |
N |
Y |
Bluetooth profiles supported |
A2DP source/sink |
Y |
Y |
Y |
N |
Y |
Bluetooth profiles supported |
AVRCP target/controller |
Y |
Y |
Y |
N |
Y |
Bluetooth profiles supported |
HFP Dev/AG |
Y |
Y |
Y |
N |
Y |
Bluetooth profiles supported |
OPP server/client |
Y |
Y |
Y |
N |
Y |
Bluetooth profiles supported |
SPP server/client |
Y |
Y |
Y |
N |
Y |
Bluetooth profiles supported |
HID target/device |
Y |
Y |
Y |
N |
Y |
Bluetooth audio features |
PCM NBS central/peripheral |
Y |
Y |
Y |
N |
Y |
Bluetooth audio features |
PCM WBS central/peripheral |
Y |
Y |
Y |
N |
Y |
Parent topic:Bluetooth radio
[^1] Experimental feature intended for evaluation/early development only and not production. Incomplete mandatory certification.
Bluetooth LE
Features |
Sub features |
88W8987 |
IW416 |
IW611/IW612 |
RW610/RW612 |
AW611 |
---|---|---|---|---|---|---|
Generic features |
Maximum 16 Bluetooth LE connections (central role) |
Y |
Y |
Y |
Y |
Y |
Generic features |
Deep sleep using out-of-band |
Y |
Y |
N |
N |
N |
Generic features |
Wake on Bluetooth LE (SoC to Host) |
Y |
Y |
Y |
N |
Y |
Generic features |
RF Test mode |
Y |
Y |
Y |
Y |
Y |
Bluetooth profile support |
Bluetooth LE GATT |
Y |
Y |
Y |
Y |
Y |
Bluetooth profile support |
Bluetooth LE HID over GATT |
Y |
Y |
Y |
Y |
Y |
Bluetooth profile support |
Bluetooth LE GAP |
Y |
Y |
Y |
Y |
Y |
Bluetooth LE 4.0 support |
Low Energy physical layer |
Y |
Y |
Y |
Y |
Y |
Bluetooth LE 4.0 support |
Low Energy link layer |
Y |
Y |
Y |
Y |
Y |
Bluetooth LE 4.0 support |
Enhancements to HCI for Low Energy |
Y |
Y |
Y |
Y |
Y |
Bluetooth LE 4.0 support |
Low energy direct test mode |
Y |
Y |
Y |
Y |
Y |
Bluetooth 4.1 support |
Low duty cycle directed advertising |
Y |
Y |
Y |
Y |
Y |
Bluetooth 4.1 support |
Bluetooth LE dual mode topology |
Y |
Y |
Y |
Y |
Y |
Bluetooth 4.1 support |
Bluetooth LE privacy v1.1 |
Y |
Y |
Y |
Y |
Y |
Bluetooth 4.1 support |
Bluetooth LE link layer topology |
Y |
Y |
Y |
Y |
Y |
Bluetooth 4.2 support |
Bluetooth LE secure connection |
Y |
Y |
Y |
Y |
Y |
Bluetooth 4.2 support |
Bluetooth LE link layer privacy v1.2 |
Y |
Y |
Y |
Y |
Y |
Bluetooth 4.2 support |
Bluetooth LE data length extension |
Y |
Y |
Y |
Y |
Y |
Bluetooth 4.2 support |
Link layer extended scanner filter policies |
Y |
Y |
Y |
Y |
Y |
Bluetooth 5.0 support |
Bluetooth LE 2 Mbps support |
Y |
Y |
Y |
Y |
Y |
Bluetooth 5.0 support |
High duty cycle directed advertising |
Y |
Y |
Y |
Y |
Y |
Bluetooth 5.0 support |
Low Energy advertising extension |
N |
Y |
Y |
Y |
Y |
Bluetooth 5.0 support |
Low Energy long range |
N |
Y |
Y |
Y |
Y |
Bluetooth 5.0 support |
Low Energy periodic advertisement |
N |
Y |
Y |
Y |
Y |
Bluetooth 5.2 support |
Low Energy power control |
N |
N |
Y |
Y |
Y |
Isochronous channel |
N |
N |
Y |
Y |
Y |
|
Broadcast LE Audio BIS source |
N |
N |
Y |
N |
Y |
|
Broadcast LE Audio BIS sink |
N |
N |
Y |
N |
Y |
|
Broadcast LE Audio BIG Validation |
N |
N |
Y |
N |
Y |
|
Broadcast LE Audio Phy: 1M/2M/ coded |
N |
N |
Y |
N |
Y |
|
Broadcast LE Audio framed mode |
N |
N |
Y |
N |
Y |
|
Broadcast LE Audio unframed mode |
N |
N |
Y |
N |
Y |
|
Broadcast LE Audio sequential packing |
N |
N |
Y |
N |
Y |
|
Broadcast LE Audio: Mono and Stereo |
N |
N |
Y |
N |
Y |
|
Broadcast LE Audio BIS encrypted audio |
N |
N |
Y |
N |
Y |
|
Broadcast LE Audio BIS unencrypted audio |
N |
N |
Y |
N |
Y |
|
Unicast LE Audio CIS source |
N |
N |
Y |
N |
Y |
|
Unicast LE Audio CIS sink |
N |
N |
Y |
N |
Y |
|
Unicast LE Audio CIG validation |
N |
N |
Y |
N |
Y |
|
Unicast LE Audio CIS synchronization |
N |
N |
Y |
N |
Y |
|
Unicast LE Audio Phy: 1M/2M/ coded |
N |
N |
Y |
N |
Y |
|
Unicast LE Audio framed mode |
N |
N |
Y |
N |
Y |
|
Unicast LE Audio unframed mode |
N |
N |
Y |
N |
Y |
|
Unicast LE Audio sequential packing |
N |
N |
Y |
N |
Y |
|
Unicast LE Audio: mono and stereo |
N |
N |
Y |
N |
Y |
|
Unicast LE Audio CIS encrypted audio |
N |
N |
Y |
N |
Y |
|
Unicast LE Audio CIS unencrypted audio |
N |
N |
Y |
N |
Y |
|
Unicast LE Audio TX/RX and bidirectional traffic |
N |
N |
Y |
N |
Y |
|
ISO interval for LE Audio: 7.5ms 10ms 20ms 30ms |
N |
N |
Y |
N |
Y |
|
Sampling frequency for LE Audio: 8kHz 16kHz 24kHz, 32kHz, 44.1kHz, 48kHz |
N |
N |
Y |
N |
Y |
|
LE Audio Auracast use cases: Auracast streaming 2 BISes |
N |
N |
Y |
N |
Y |
|
LE Audio Unicast use cases: Unicast streaming 2 CISes |
N |
N |
Y |
N |
Y |
|
LE Audio Unicast Use cases: Unicast streaming 4 CISes |
N |
N |
Y |
N |
Y |
|
A2DP + Auracast/Unicast Bridge use cases – CIS/BIS |
N |
N |
Y |
N |
Y |
|
BCA TDM Coexistence mode (shared antenna) |
STA + Bluetooth coexistence |
Y |
Y |
Y |
N |
Y |
BCA TDM Coexistence mode (shared antenna) |
STA + Bluetooth LE coexistence |
Y |
Y |
Y |
Y |
Y |
BCA TDM Coexistence mode (shared antenna) |
STA + Bluetooth + Bluetooth LE coexistence |
Y |
Y |
Y |
N |
Y |
BCA TDM Coexistence mode (shared antenna) |
AP + Bluetooth coexistence |
Y |
Y |
Y |
N |
Y |
BCA TDM Coexistence mode (shared antenna) |
AP + Bluetooth LE coexistence |
Y |
Y |
Y |
Y |
Y |
BCA TDM Coexistence mode (shared antenna) |
AP + Bluetooth + Bluetooth LE coexistence |
Y |
Y |
Y |
N |
Y |
BCA TDM coexistence mode (separate antenna) |
STA + Bluetooth coexistence |
Y |
Y |
Y |
N |
Y |
BCA TDM coexistence mode (separate antenna) |
STA + Bluetooth LE coexistence |
Y |
Y |
Y |
Y |
Y |
BCA TDM coexistence mode (separate antenna) |
STA + Bluetooth + Bluetooth LE coexistence |
Y |
Y |
Y |
N |
Y |
BCA TDM coexistence mode (separate antenna) |
AP + Bluetooth coexistence |
Y |
Y |
Y |
N |
Y |
BCA TDM coexistence mode (separate antenna) |
AP + Bluetooth LE coexistence |
Y |
Y |
Y |
Y |
Y |
BCA TDM coexistence mode (separate antenna) |
AP + Bluetooth + Bluetooth LE coexistence |
Y |
Y |
Y |
N |
Y |
Note: Details of the tested Bluetooth LE Audio use cases:
Number of streams:
1-CIG | upto 4-CIS with 1 LE ACL (for 4-CIS: execute only mono UCs, SDU Int: 10ms)
1-CIG | upto 4-CIS with 4 separate LE ACL (for 4-CIS: SDU Size= Max 100 Oct, PHY=2M, RTN=1, SDU Int: 10ms only) (execute only mono UCs for 4-CIS)
1-BIG | upto 4-BIS (for 4-BIS: execute only mono UCs, SDU Int: 10ms only)
PHY: 2M and 1M
Audio mode: mono (for 1 to 4 streams) and stereo (for 1 stream)
Packing: sequential and interleaved
Bit rate: maximum 96kbps
For 1-CIG with upto 3-CIS: maximum bit rate 96kbps
For 1-CIG with 4-CIS: maximum bit rate 80kbps
For 1-BIG with 4-BIS: maximum bit rate 80kbps
For 2-CIG cases: maximum bit rate 80kbps
Mode: unframed mode
48_5 and 48_6 mono and stereo configurations are not supported.
Details of the tested Bluetooth coexistence (Bluetooth + Bluetooth LE Audio) use cases:
Bluetooth + Bluetooth LE Audio
A2DP + Bluetooth LE Audio bridging support
A2DP sink link (central) -> LEA 2-CIS (SDU Int: 10ms only | A2DP only with SBC Codec | PHY: 2M)
Parent topic:Bluetooth radio
[^1] Experimental feature intended for evaluation/early development only and not production. Incomplete mandatory certification.
[^2] LE audio feature is supported for standalone scenarios only and not for BR/EDR and Wi-Fi coexistence scenarios such as LE audio + BR/EDR link or LE audio + Wi-Fi link. From the perspective of NXP Edgefast Bluetooth host stack, LE audio feature can be disabled by the CONFIG_BT_AUDIO macro without impact on any other features. LE audio feature can be tested by the user, using their own supported host stack.
Parent topic:Features