Touchlink command events

The events that can be generated for Touchlink are listed and described below (the enumerations are defined in the structure teCLD_ZllCommission_Command, shown in Section 44.9.1).

Event	Description
E_CLD_COMMISSION_CMD_SCAN_REQ	A Scan Request has been received (by server)
E_CLD_COMMISSION_CMD_SCAN_RSP	A Scan Response has been received (by client)
E_CLD_COMMISSION_CMD_DEVICE_INFO_REQ	A Device Information Request has been received (by server)
E_CLD_COMMISSION_CMD_DEVICE_INFO_RSP	A Device Information Response has been received (by client)
E_CLD_COMMISSION_CMD_IDENTIFY_REQ	An Identify Request has been received (by server)
E_CLD_COMMISSION_CMD_FACTORY_RESET_REQ	A Reset To Factory New Request has been received (by server)
E_CLD_COMMISSION_CMD_NETWORK_START_REQ	A Network Start Request has been received (by server)
E_CLD_COMMISSION_CMD_NETWORK_START_RSP	A Network Start Response has been received (by cli-ent)
E_CLD_COMMISSION_CMD_NETWORK_JOIN_

ROUTER_REQ

|A Network Join Router Request has been received (by server)| |E_CLD_COMMISSION_CMD_NETWORK_JOIN_

ROUTER_RSP

|A Network Join Router Response has been received (by client)| |E_CLD_COMMISSION_CMD_NETWORK_JOIN_

END_DEVICE_REQ

|A Network Join End Device Request has been received (by server)| |E_CLD_COMMISSION_CMD_NETWORK_JOIN_

END_DEVICE_RSP

|A Network Join End Device Response has been received (by client)| |E_CLD_COMMISSION_CMD_NETWORK_UPDATE_REQ|A Network Update Request has been received (by server)|

Parent topic:Touchlink Commissioning events