MCXA577

MCXA577#

AOI: Crossbar AND/OR/INVERT Driver#

void AOI_Init(AOI_Type *base)

Initializes an AOI instance for operation.

This function un-gates the AOI clock.

Parameters:

base – AOI peripheral address.

void AOI_Deinit(AOI_Type *base)

Deinitializes an AOI instance for operation.

This function shutdowns AOI module.

Parameters:

base – AOI peripheral address.

void AOI_GetEventLogicConfig(AOI_Type *base, aoi_event_t event, aoi_event_config_t *config)

Gets the Boolean evaluation associated.

This function returns the Boolean evaluation associated.

Example:

aoi_event_config_t demoEventLogicStruct;

AOI_GetEventLogicConfig(AOI, kAOI_Event0, &demoEventLogicStruct);

Parameters:

base – AOI peripheral address.
event – Index of the event which will be set of type aoi_event_t.
config – Selected input configuration .

void AOI_SetEventLogicConfig(AOI_Type *base, aoi_event_t event, const aoi_event_config_t *eventConfig)

Configures an AOI event.

This function configures an AOI event according to the aoiEventConfig structure. This function configures all inputs (A, B, C, and D) of all product terms (0, 1, 2, and 3) of a desired event.

Example:

aoi_event_config_t demoEventLogicStruct;

demoEventLogicStruct.PT0AC = kAOI_InvInputSignal;
demoEventLogicStruct.PT0BC = kAOI_InputSignal;
demoEventLogicStruct.PT0CC = kAOI_LogicOne;
demoEventLogicStruct.PT0DC = kAOI_LogicOne;

demoEventLogicStruct.PT1AC = kAOI_LogicZero;
demoEventLogicStruct.PT1BC = kAOI_LogicOne;
demoEventLogicStruct.PT1CC = kAOI_LogicOne;
demoEventLogicStruct.PT1DC = kAOI_LogicOne;

demoEventLogicStruct.PT2AC = kAOI_LogicZero;
demoEventLogicStruct.PT2BC = kAOI_LogicOne;
demoEventLogicStruct.PT2CC = kAOI_LogicOne;
demoEventLogicStruct.PT2DC = kAOI_LogicOne;

demoEventLogicStruct.PT3AC = kAOI_LogicZero;
demoEventLogicStruct.PT3BC = kAOI_LogicOne;
demoEventLogicStruct.PT3CC = kAOI_LogicOne;
demoEventLogicStruct.PT3DC = kAOI_LogicOne;

AOI_SetEventLogicConfig(AOI, kAOI_Event0, demoEventLogicStruct);

Parameters:

base – AOI peripheral address.
event – Event which will be configured of type aoi_event_t.
eventConfig – Pointer to type aoi_event_config_t structure. The user is responsible for filling out the members of this structure and passing the pointer to this function.

FSL_AOI_DRIVER_VERSION: Version 2.0.2.

enum _aoi_input_config

AOI input configurations.

The selection item represents the Boolean evaluations.

Values:

enumerator kAOI_LogicZero: Forces the input to logical zero.

enumerator kAOI_InputSignal: Passes the input signal.

enumerator kAOI_InvInputSignal: Inverts the input signal.

enumerator kAOI_LogicOne: Forces the input to logical one.

enum _aoi_event

AOI event indexes, where an event is the collection of the four product terms (0, 1, 2, and 3) and the four signal inputs (A, B, C, and D).

Values:

enumerator kAOI_Event0: Event 0 index

enumerator kAOI_Event1: Event 1 index

enumerator kAOI_Event2: Event 2 index

enumerator kAOI_Event3: Event 3 index

typedef enum _aoi_input_config aoi_input_config_t

AOI input configurations.

The selection item represents the Boolean evaluations.

typedef enum _aoi_event aoi_event_t: AOI event indexes, where an event is the collection of the four product terms (0, 1, 2, and 3) and the four signal inputs (A, B, C, and D).

typedef struct _aoi_event_config aoi_event_config_t

AOI event configuration structure.

Defines structure _aoi_event_config and use the AOI_SetEventLogicConfig() function to make whole event configuration.

AOI: AOI peripheral address

struct _aoi_event_config

#include <fsl_aoi.h>

AOI event configuration structure.

Defines structure _aoi_event_config and use the AOI_SetEventLogicConfig() function to make whole event configuration.

Public Members

aoi_input_config_t PT0AC: Product term 0 input A

aoi_input_config_t PT0BC: Product term 0 input B

aoi_input_config_t PT0CC: Product term 0 input C

aoi_input_config_t PT0DC: Product term 0 input D

aoi_input_config_t PT1AC: Product term 1 input A

aoi_input_config_t PT1BC: Product term 1 input B

aoi_input_config_t PT1CC: Product term 1 input C

aoi_input_config_t PT1DC: Product term 1 input D

aoi_input_config_t PT2AC: Product term 2 input A

aoi_input_config_t PT2BC: Product term 2 input B

aoi_input_config_t PT2CC: Product term 2 input C

aoi_input_config_t PT2DC: Product term 2 input D

aoi_input_config_t PT3AC: Product term 3 input A

aoi_input_config_t PT3BC: Product term 3 input B

aoi_input_config_t PT3CC: Product term 3 input C

aoi_input_config_t PT3DC: Product term 3 input D

CDOG#

status_t CDOG_Init(CDOG_Type *base, cdog_config_t *conf)

Initialize CDOG.

This function initializes CDOG block and setting.

Parameters:

base – CDOG peripheral base address
conf – CDOG configuration structure

Returns:

Status of the init operation

void CDOG_Deinit(CDOG_Type *base)

Deinitialize CDOG.

This function deinitializes CDOG secure counter.

Parameters:

base – CDOG peripheral base address

void CDOG_GetDefaultConfig(cdog_config_t *conf)

Sets the default configuration of CDOG.

This function initialize CDOG config structure to default values.

Parameters:

conf – CDOG configuration structure

void CDOG_Stop(CDOG_Type *base, uint32_t stop)

Stops secure counter and instruction timer.

This function stops instruction timer and secure counter. This also change state od CDOG to IDLE.

Parameters:

base – CDOG peripheral base address
stop – expected value which will be compared with value of secure counter

void CDOG_Start(CDOG_Type *base, uint32_t reload, uint32_t start)

Sets secure counter and instruction timer values.

This function sets value in RELOAD and START registers for instruction timer and secure counter

Parameters:

base – CDOG peripheral base address
reload – reload value
start – start value

void CDOG_Check(CDOG_Type *base, uint32_t check)

Checks secure counter.

This function compares stop value in handler with secure counter value by writting to RELOAD refister.

Parameters:

base – CDOG peripheral base address
check – expected (stop) value

void CDOG_Set(CDOG_Type *base, uint32_t stop, uint32_t reload, uint32_t start)

Sets secure counter and instruction timer values.

This function sets value in STOP, RELOAD and START registers for instruction timer and secure counter.

Parameters:

base – CDOG peripheral base address
stop – expected value which will be compared with value of secure counter
reload – reload value for instruction timer
start – start value for secure timer

void CDOG_Add(CDOG_Type *base, uint32_t add)

Add value to secure counter.

This function add specified value to secure counter.

Parameters:

base – CDOG peripheral base address.
add – Value to be added.

void CDOG_Add1(CDOG_Type *base)

Add 1 to secure counter.

This function add 1 to secure counter.

Parameters:

base – CDOG peripheral base address.

void CDOG_Add16(CDOG_Type *base)

Add 16 to secure counter.

This function add 16 to secure counter.

Parameters:

base – CDOG peripheral base address.

void CDOG_Add256(CDOG_Type *base)

Add 256 to secure counter.

This function add 256 to secure counter.

Parameters:

base – CDOG peripheral base address.

void CDOG_Sub(CDOG_Type *base, uint32_t sub)

brief Substract value to secure counter

This function substract specified value to secure counter.

param base CDOG peripheral base address. param sub Value to be substracted.

void CDOG_Sub1(CDOG_Type *base)

Substract 1 from secure counter.

This function substract specified 1 from secure counter.

Parameters:

base – CDOG peripheral base address.

void CDOG_Sub16(CDOG_Type *base)

Substract 16 from secure counter.

This function substract specified 16 from secure counter.

Parameters:

base – CDOG peripheral base address.

void CDOG_Sub256(CDOG_Type *base)

Substract 256 from secure counter.

This function substract specified 256 from secure counter.

Parameters:

base – CDOG peripheral base address.

void CDOG_WritePersistent(CDOG_Type *base, uint32_t value)

Set the CDOG persistent word.

Parameters:

base – CDOG peripheral base address.
value – The value to be written.

uint32_t CDOG_ReadPersistent(CDOG_Type *base)

Get the CDOG persistent word.

Parameters:

base – CDOG peripheral base address.

Returns:

The persistent word.

FSL_CDOG_DRIVER_VERSION

Defines CDOG driver version 2.1.3.

Change log:

Version 2.1.3
- Re-design multiple instance IRQs and Clocks
- Add fix for RESTART command errata
Version 2.1.2
- Support multiple IRQs
- Fix default CONTROL values
Version 2.1.1
- Remove bit CONTROL[CONTROL_CTRL]
Version 2.1.0
- Rename CWT to CDOG
Version 2.0.2
- Fix MISRA-2012 issues
Version 2.0.1
- Fix doxygen issues
Version 2.0.0
- initial version

enum __cdog_debug_Action_ctrl_enum

Values:

enumerator kCDOG_DebugHaltCtrl_Run

enumerator kCDOG_DebugHaltCtrl_Pause

enum __cdog_irq_pause_ctrl_enum

Values:

enumerator kCDOG_IrqPauseCtrl_Run

enumerator kCDOG_IrqPauseCtrl_Pause

enum __cdog_fault_ctrl_enum

Values:

enumerator kCDOG_FaultCtrl_EnableReset

enumerator kCDOG_FaultCtrl_EnableInterrupt

enumerator kCDOG_FaultCtrl_NoAction

enum __code_lock_ctrl_enum

Values:

enumerator kCDOG_LockCtrl_Lock

enumerator kCDOG_LockCtrl_Unlock

typedef uint32_t secure_counter_t

SC_ADD(add)

SC_ADD1

SC_ADD16

SC_ADD256

SC_SUB(sub)

SC_SUB1

SC_SUB16

SC_SUB256

SC_CHECK(val)

struct cdog_config_t

Clock Driver#

enum _clock_ip_name

Clock gate name used for CLOCK_EnableClock/CLOCK_DisableClock.

Values:

enumerator kCLOCK_GateINPUTMUX0: Clock gate name: INPUTMUX0

enumerator kCLOCK_GateFREQME: Clock gate name: FREQME

enumerator kCLOCK_GateCTIMER0: Clock gate name: CTIMER0

enumerator kCLOCK_GateCTIMER1: Clock gate name: CTIMER1

enumerator kCLOCK_GateCTIMER2: Clock gate name: CTIMER2

enumerator kCLOCK_GateCTIMER3: Clock gate name: CTIMER3

enumerator kCLOCK_GateCTIMER4: Clock gate name: CTIMER4

enumerator kCLOCK_GateUTICK0: Clock gate name: UTICK0

enumerator kCLOCK_GateWWDT0: Clock gate name: WWDT0

enumerator kCLOCK_GateWWDT1: Clock gate name: WWDT1

enumerator kCLOCK_GateDMA0: Clock gate name: DMA0

enumerator kCLOCK_GateDMA1: Clock gate name: DMA1

enumerator kCLOCK_GateAOI0: Clock gate name: AOI0

enumerator kCLOCK_GateCRC0: Clock gate name: CRC0

enumerator kCLOCK_GateEIM0: Clock gate name: EIM0

enumerator kCLOCK_GateERM0: Clock gate name: ERM0

enumerator kCLOCK_GateFLEXIO0: Clock gate name: FLEXIO0

enumerator kCLOCK_GateLPI2C0: Clock gate name: LPI2C0

enumerator kCLOCK_GateLPI2C1: Clock gate name: LPI2C1

enumerator kCLOCK_GateLPI2C2: Clock gate name: LPI2C2

enumerator kCLOCK_GateLPI2C3: Clock gate name: LPI2C3

enumerator kCLOCK_GateLPI2C4: Clock gate name: LPI2C4

enumerator kCLOCK_GateLPUART0: Clock gate name: LPUART0

enumerator kCLOCK_GateLPUART1: Clock gate name: LPUART1

enumerator kCLOCK_GateLPUART2: Clock gate name: LPUART2

enumerator kCLOCK_GateLPUART3: Clock gate name: LPUART3

enumerator kCLOCK_GateLPUART4: Clock gate name: LPUART4

enumerator kCLOCK_GateLPUART5: Clock gate name: LPUART5

enumerator kCLOCK_GateOSTIMER0: Clock gate name: OSTIMER0

enumerator kCLOCK_GateLPSPI0: Clock gate name: LPSPI0

enumerator kCLOCK_GateLPSPI1: Clock gate name: LPSPI1

enumerator kCLOCK_GateLPSPI2: Clock gate name: LPSPI2

enumerator kCLOCK_GateLPSPI3: Clock gate name: LPSPI3

enumerator kCLOCK_GateLPSPI4: Clock gate name: LPSPI4

enumerator kCLOCK_GateLPSPI5: Clock gate name: LPSPI5

enumerator kCLOCK_GatePORT0: Clock gate name: PORT0

enumerator kCLOCK_GatePORT1: Clock gate name: PORT1

enumerator kCLOCK_GatePORT2: Clock gate name: PORT2

enumerator kCLOCK_GatePORT3: Clock gate name: PORT3

enumerator kCLOCK_GatePORT4: Clock gate name: PORT4

enumerator kCLOCK_GatePORT5: Clock gate name: PORT5

enumerator kCLOCK_GateADC0: Clock gate name: ADC0

enumerator kCLOCK_GateADC1: Clock gate name: ADC1

enumerator kCLOCK_GateCMP0: Clock gate name: CMP0

enumerator kCLOCK_GateDAC0: Clock gate name: DAC0

enumerator kCLOCK_GateDAC1: Clock gate name: DAC1

enumerator kCLOCK_GateVREF0: Clock gate name: VREF0

enumerator kCLOCK_GateTSI0: Clock gate name: TSI0

enumerator kCLOCK_GateI3C0: Clock gate name: I3C0

enumerator kCLOCK_GateI3C1: Clock gate name: I3C1

enumerator kCLOCK_GateI3C2: Clock gate name: I3C2

enumerator kCLOCK_GateI3C3: Clock gate name: I3C3

enumerator kCLOCK_GateFLEXCAN0: Clock gate name: FLEXCAN0

enumerator kCLOCK_GateFLEXCAN1: Clock gate name: FLEXCAN1

enumerator kCLOCK_GateE1588: Clock gate name: E1588

enumerator kCLOCK_GateRMII: Clock gate name: RMII

enumerator kCLOCK_GateENET0: Clock gate name: ENET0

enumerator kCLOCK_GateTENBASET_PHY0: Clock gate name: TENBASET_PHY0

enumerator kCLOCK_GateFLEXSPI0: Clock gate name: FLEXSPI0

enumerator kCLOCK_GateSPIFILTER0: Clock gate name: SPIFILTER0

enumerator kCLOCK_GateESPI0: Clock gate name: ESPI0

enumerator kCLOCK_GateUSBHS: Clock gate name: USBHS

enumerator kCLOCK_GateUSBHS_PHY: Clock gate name: USBHS_PHY

enumerator kCLOCK_GateEWM0: Clock gate name: EWM0

enumerator kCLOCK_GateRAMA: Clock gate name: RAMA

enumerator kCLOCK_GateRAMB: Clock gate name: RAMB

enumerator kCLOCK_GateGPIO0: Clock gate name: GPIO0

enumerator kCLOCK_GateGPIO1: Clock gate name: GPIO1

enumerator kCLOCK_GateGPIO2: Clock gate name: GPIO2

enumerator kCLOCK_GateGPIO3: Clock gate name: GPIO3

enumerator kCLOCK_GateGPIO4: Clock gate name: GPIO4

enumerator kCLOCK_GateGPIO5: Clock gate name: GPIO5

enumerator kCLOCK_GateROMC: Clock gate name: ROMC

enumerator kCLOCK_GateSMARTDMA0: Clock gate name: SMARTDMA0

enumerator kCLOCK_GateSECCON: Clock gate name: SECCON

enumerator kCLOCK_GateGLIKEY0: Clock gate name: GLIKEY0

enumerator kCLOCK_GateTDET0: Clock gate name: TDET0

enumerator kCLOCK_GatePKC0: Clock gate name: PKC0

enumerator kCLOCK_GateSGI0: Clock gate name: SGI0

enumerator kCLOCK_GateTRNG0: Clock gate name: TRNG0

enumerator kCLOCK_GateUDF0: Clock gate name: UDF0

enumerator kCLOCK_GateDGDET0: Clock gate name: DGDET0

enumerator kCLOCK_GateITRC0: Clock gate name: ITRC0

enumerator kCLOCK_GateATX0: Clock gate name: ATX0

enumerator kCLOCK_GateMTR: Clock gate name: MTR

enumerator kCLOCK_GateTCU: Clock gate name: TCU

enumerator kCLOCK_GateNotAvail: Clock gate name: None

enum _clock_name

Clock name used to get clock frequency.

Values:

enumerator kCLOCK_MainClk: MAIN_CLK

enumerator kCLOCK_CoreSysClk: Core/system clock(CPU_CLK)

enumerator kCLOCK_SYSTEM_CLK: SYSTEM clock/AHB_BUS

enumerator kCLOCK_BusClk: SYSTEM clock divided by 2

enumerator kCLOCK_SLOW_CLK: SYSTEM clock divided by 6

enumerator kCLOCK_ExtClk: External Clock

enumerator kCLOCK_Fro16K: FRO16K

enumerator kCLOCK_Fro12M: FRO12M

enumerator kCLOCK_Fro12MDiv: FRO12MDiv

enumerator kCLOCK_FroHf: FROHF

enumerator kCLOCK_FroHfDiv: Divided by FROHF

enumerator kCLOCK_Clk48M: CLK48M

enumerator kCLOCK_Pll1Clk: Pll1Clk

enumerator kCLOCK_Pll1ClkDiv: Pll1CkDiv

enumerator kCLOCK_Clk1M: CLK1M

enumerator kCLOCK_UsbPll: UsbPll

enumerator kCLOCK_UsbPfdClk: UsbPfdClk

enumerator kCLOCK_Clk16K0: CLK16K[0]

enumerator kCLOCK_Clk16K1: CLK16K[1]

enumerator kCLOCK_Clk16K2: CLK16K[2]

enumerator kCLOCK_Osc32K0: OSC32K[0]

enumerator kCLOCK_Osc32K1: OSC32K[1]

enumerator kCLOCK_Osc32K2: OSC32K[2]

enumerator kCLOCK_LpOsc: Low Power Oscillator

enum _clock_select_name

Clock name used to get clock frequency.

Values:

enumerator kCLOCK_SelI3C0_FCLK: I3C0_FCLK clock selection

enumerator kCLOCK_SelI3C1_FCLK: I3C1_FCLK clock selection

enumerator kCLOCK_SelCTIMER0: CTIMER0 clock selection

enumerator kCLOCK_SelCTIMER1: CTIMER1 clock selection

enumerator kCLOCK_SelCTIMER2: CTIMER2 clock selection

enumerator kCLOCK_SelCTIMER3: CTIMER3 clock selection

enumerator kCLOCK_SelCTIMER4: CTIMER4 clock selection

enumerator kCLOCK_SelWWDT1: WWDT1 clock selection

enumerator kCLOCK_SelE1588: E1588 clock selection

enumerator kCLOCK_SelRMII: RMII clock selection

enumerator kCLOCK_SelESPI0: ESPI0 clock selection

enumerator kCLOCK_SelFLEXSPI0: FLEXSPI0 clock selection

enumerator kCLOCK_SelLPSPI2: LPSPI2 clock selection

enumerator kCLOCK_SelLPSPI3: LPSPI3 clock selection

enumerator kCLOCK_SelLPSPI4: LPSPI4 clock selection

enumerator kCLOCK_SelLPSPI5: LPSPI5 clock selection

enumerator kCLOCK_SelTENBASET_PHY0: TENBASET_PHY0 clock selection

enumerator kCLOCK_SelUSBHS: USBHS clock selection

enumerator kCLOCK_SelUSBHS_PHY: USBHS_PHY clock selection

enumerator kCLOCK_SelFLEXIO0: FLEXIO0 clock selection

enumerator kCLOCK_SelLPI2C0: LPI2C0 clock selection

enumerator kCLOCK_SelLPI2C1: LPI2C1 clock selection

enumerator kCLOCK_SelLPSPI0: LPSPI0 clock selection

enumerator kCLOCK_SelLPSPI1: LPSPI1 clock selection

enumerator kCLOCK_SelI3C2_FCLK: I3C2_FCLK clock selection

enumerator kCLOCK_SelLPUART0: LPUART0 clock selection

enumerator kCLOCK_SelLPUART1: LPUART1 clock selection

enumerator kCLOCK_SelLPUART2: LPUART2 clock selection

enumerator kCLOCK_SelLPUART3: LPUART3 clock selection

enumerator kCLOCK_SelLPUART4: LPUART4 clock selection

enumerator kCLOCK_SelLPTMR0: LPTMR0 clock selection

enumerator kCLOCK_SelOSTIMER0: OSTIMER0 clock selection

enumerator kCLOCK_SelADC: ADCx clock selection

enumerator kCLOCK_SelCMP0_RR: CMP0_RR clock selection

enumerator kCLOCK_SelDAC0: DAC0 clock selection

enumerator kCLOCK_SelDAC1: DAC1 clock selection

enumerator kCLOCK_SelTSI0: TSI0 clock selection

enumerator kCLOCK_SelFLEXCAN0: FLEXCAN0 clock selection

enumerator kCLOCK_SelFLEXCAN1: FLEXCAN1 clock selection

enumerator kCLOCK_SelLPI2C2: LPI2C2 clock selection

enumerator kCLOCK_SelLPI2C3: LPI2C3 clock selection

enumerator kCLOCK_SelLPI2C4: LPI2C4 clock selection

enumerator kCLOCK_SelLPUART5: LPUART5 clock selection

enumerator kCLOCK_SelI3C3_FCLK: I3C3_FCLK clock selection

enumerator kCLOCK_SelTRACE: TRACE clock selection

enumerator kCLOCK_SelCLKOUT: CLKOUT clock selection

enumerator kCLOCK_SelSYSTICK: SYSTICK clock selection

enumerator kCLOCK_SelSCGSCS: SCG SCS clock selection

enumerator kCLOCK_SelMax: MAX clock selection

enum _clock_attach_id

The enumerator of clock attach Id.

Values:

enumerator kCLK_IN_to_MAIN_CLK: Attach clk_in to MAIN_CLK.

enumerator kFRO12M_to_MAIN_CLK: Attach FRO_12M to MAIN_CLK.

enumerator kFRO_HF_to_MAIN_CLK: Attach FRO_HF to MAIN_CLK.

enumerator kOSC_32K_to_MAIN_CLK: Attach OSC_32K[1] to MAIN_CLK.

enumerator kPll1Clk_to_MAIN_CLK: Attach Pll1Clk to MAIN_CLK.

enumerator kUSB_PFD_to_MAIN_CLK: Attach Pll1Clk to MAIN_CLK.

enumerator kNONE_to_MAIN_CLK: Attach NONE to MAIN_CLK.

enumerator kFRO_LF_DIV_to_I3C0FCLK: Attach FRO_LF_DIV to I3C0FCLK.

enumerator kFRO_HF_DIV_to_I3C0FCLK: Attach FRO_HF_DIV to I3C0FCLK.

enumerator kCLK_IN_to_I3C0FCLK: Attach CLK_IN to I3C0FCLK.

enumerator kCLK_1M_to_I3C0FCLK: Attach CLK_1M to I3C0FCLK.

enumerator kPll1ClkDiv_to_I3C0FCLK: Attach Pll1ClkDiv to I3C0FCLK.

enumerator kNONE_to_I3C0FCLK: Attach NONE to I3C0FCLK.

enumerator kFRO_LF_DIV_to_I3C1FCLK: Attach FRO_LF_DIV to I3C1FCLK.

enumerator kFRO_HF_DIV_to_I3C1FCLK: Attach FRO_HF_DIV to I3C1FCLK.

enumerator kCLK_IN_to_I3C1FCLK: Attach CLK_IN to I3C1FCLK.

enumerator kCLK_1M_to_I3C1FCLK: Attach CLK_1M to I3C1FCLK.

enumerator kPll1ClkDiv_to_I3C1FCLK: Attach Pll1ClkDiv to I3C1FCLK.

enumerator kNONE_to_I3C1FCLK: Attach NONE to I3C1FCLK.

enumerator kFRO_LF_DIV_to_I3C2FCLK: Attach FRO_LF_DIV to I3C2FCLK.

enumerator kFRO_HF_DIV_to_I3C2FCLK: Attach FRO_HF_DIV to I3C2FCLK.

enumerator kCLK_IN_to_I3C2FCLK: Attach CLK_IN to I3C2FCLK.

enumerator kCLK_1M_to_I3C2FCLK: Attach CLK_1M to I3C2FCLK.

enumerator kPll1ClkDiv_to_I3C2FCLK: Attach Pll1ClkDiv to I3C2FCLK.

enumerator kNONE_to_I3C2FCLK: Attach NONE to I3C2FCLK.

enumerator kFRO_LF_DIV_to_I3C3FCLK: Attach FRO_LF_DIV to I3C3FCLK.

enumerator kFRO_HF_DIV_to_I3C3FCLK: Attach FRO_HF_DIV to I3C3FCLK.

enumerator kCLK_IN_to_I3C3FCLK: Attach CLK_IN to I3C3FCLK.

enumerator kCLK_1M_to_I3C3FCLK: Attach CLK_1M to I3C3FCLK.

enumerator kPll1ClkDiv_to_I3C3FCLK: Attach Pll1ClkDiv to I3C3FCLK.

enumerator kNONE_to_I3C3FCLK: Attach NONE to I3C3FCLK.

enumerator kFRO_LF_DIV_to_CTIMER0: Attach FRO_LF_DIV to CTIMER0.

enumerator kFRO_HF_to_CTIMER0: Attach FRO_HF to CTIMER0.

enumerator kCLK_IN_to_CTIMER0: Attach CLK_IN to CTIMER0.

enumerator kLP_OSC_to_CTIMER0: Attach LP_OSC to CTIMER0.

enumerator kCLK_1M_to_CTIMER0: Attach CLK_1M to CTIMER0.

enumerator kPll1ClkDiv_to_CTIMER0: Attach Pll1ClkDiv to CTIMER0.

enumerator kNONE_to_CTIMER0: Attach NONE to CTIMER0.

enumerator kFRO_LF_DIV_to_CTIMER1: Attach FRO_LF_DIV to CTIMER1.

enumerator kFRO_HF_to_CTIMER1: Attach FRO_HF to CTIMER1.

enumerator kCLK_IN_to_CTIMER1: Attach CLK_IN to CTIMER1.

enumerator kLP_OSC_to_CTIMER1: Attach LP_OSC to CTIMER1.

enumerator kCLK_1M_to_CTIMER1: Attach CLK_1M to CTIMER1.

enumerator kPll1ClkDiv_to_CTIMER1: Attach Pll1ClkDiv to CTIMER1.

enumerator kNONE_to_CTIMER1: Attach NONE to CTIMER1.

enumerator kFRO_LF_DIV_to_CTIMER2: Attach FRO_LF_DIV to CTIMER2.

enumerator kFRO_HF_to_CTIMER2: Attach FRO_HF to CTIMER2.

enumerator kCLK_IN_to_CTIMER2: Attach CLK_IN to CTIMER2.

enumerator kLP_OSC_to_CTIMER2: Attach LP_OSC to CTIMER2.

enumerator kCLK_1M_to_CTIMER2: Attach CLK_1M to CTIMER2.

enumerator kPll1ClkDiv_to_CTIMER2: Attach Pll1ClkDiv to CTIMER2.

enumerator kNONE_to_CTIMER2: Attach NONE to CTIMER2.

enumerator kFRO_LF_DIV_to_CTIMER3: Attach FRO_LF_DIV to CTIMER3.

enumerator kFRO_HF_to_CTIMER3: Attach FRO_HF to CTIMER3.

enumerator kCLK_IN_to_CTIMER3: Attach CLK_IN to CTIMER3.

enumerator kLP_OSC_to_CTIMER3: Attach LP_OSC to CTIMER3.

enumerator kCLK_1M_to_CTIMER3: Attach CLK_1M to CTIMER3.

enumerator kPll1ClkDiv_to_CTIMER3: Attach Pll1ClkDiv to CTIMER3.

enumerator kNONE_to_CTIMER3: Attach NONE to CTIMER3.

enumerator kFRO_LF_DIV_to_CTIMER4: Attach FRO_LF_DIV to CTIMER4.

enumerator kFRO_HF_to_CTIMER4: Attach FRO_HF to CTIMER4.

enumerator kCLK_IN_to_CTIMER4: Attach CLK_IN to CTIMER4.

enumerator kLP_OSC_to_CTIMER4: Attach LP_OSC to CTIMER4.

enumerator kCLK_1M_to_CTIMER4: Attach CLK_1M to CTIMER4.

enumerator kPll1ClkDiv_to_CTIMER4: Attach Pll1ClkDiv to CTIMER4.

enumerator kNONE_to_CTIMER4: Attach NONE to CTIMER4.

enumerator kFRO_LF_DIV_to_FLEXIO0: Attach FRO_LF_DIV to FLEXIO0.

enumerator kFRO_HF_to_FLEXIO0: Attach FRO_HF to FLEXIO0.

enumerator kCLK_IN_to_FLEXIO0: Attach CLK_IN to FLEXIO0.

enumerator kCLK_1M_to_FLEXIO0: Attach CLK_1M to FLEXIO0.

enumerator kPll1ClkDiv_to_FLEXIO0: Attach Pll1ClkDiv to FLEXIO0.

enumerator kNONE_to_FLEXIO0: Attach NONE to FLEXIO0.

enumerator kFRO_HF_to_FLEXCAN0: Attach FRO_HF to FLEXCAN0.

enumerator kFRO_HF_DIV_to_FLEXCAN0: Attach FRO_HF_DIV to FLEXCAN0.

enumerator kCLK_IN_to_FLEXCAN0: Attach CLK_IN to FLEXCAN0.

enumerator kUSB_PLL_to_FLEXCAN0: Attach USB_PLL to FLEXCAN0.

enumerator kPll1ClkDiv_to_FLEXCAN0: Attach Pll1ClkDiv to FLEXCAN0.

enumerator kNONE_to_FLEXCAN0: Attach NONE to FLEXCAN0.

enumerator kFRO_HF_to_FLEXCAN1: Attach FRO_HF to FLEXCAN1.

enumerator kFRO_HF_DIV_to_FLEXCAN1: Attach FRO_HF_DIV to FLEXCAN1.

enumerator kCLK_IN_to_FLEXCAN1: Attach CLK_IN to FLEXCAN1.

enumerator kUSB_PLL_to_FLEXCAN1: Attach USB_PLL to FLEXCAN1.

enumerator kPll1ClkDiv_to_FLEXCAN1: Attach Pll1ClkDiv to FLEXCAN1.

enumerator kNONE_to_FLEXCAN1: Attach NONE to FLEXCAN1.

enumerator kFRO_LF_DIV_to_DAC0: Attach FRO_LF_DIV to DAC0.

enumerator kFRO_HF_DIV_to_DAC0: Attach FRO_HF_DIV to DAC0.

enumerator kCLK_IN_to_DAC0: Attach CLK_IN to DAC0.

enumerator kCLK_1M_to_DAC0: Attach CLK_1M to DAC0.

enumerator kPll1ClkDiv_to_DAC0: Attach Pll1ClkDiv to DAC0.

enumerator kNONE_to_DAC0: Attach NONE to DAC0.

enumerator kFRO_LF_DIV_to_DAC1: Attach FRO_LF_DIV to DAC1.

enumerator kFRO_HF_DIV_to_DAC1: Attach FRO_HF_DIV to DAC1.

enumerator kCLK_IN_to_DAC1: Attach CLK_IN to DAC1.

enumerator kCLK_1M_to_DAC1: Attach CLK_1M to DAC1.

enumerator kPll1ClkDiv_to_DAC1: Attach Pll1ClkDiv to DAC1.

enumerator kNONE_to_DAC1: Attach NONE to DAC1.

enumerator kFRO_LF_DIV_to_LPI2C0: Attach FRO_LF_DIV to LPI2C0.

enumerator kFRO_HF_DIV_to_LPI2C0: Attach FRO_HF_DIV to LPI2C0.

enumerator kCLK_IN_to_LPI2C0: Attach CLK_IN to LPI2C0.

enumerator kCLK_1M_to_LPI2C0: Attach CLK_1M to LPI2C0.

enumerator kPll1ClkDiv_to_LPI2C0: Attach Pll1ClkDiv to LPI2C0.

enumerator kNONE_to_LPI2C0: Attach NONE to LPI2C0.

enumerator kFRO_LF_DIV_to_LPI2C1: Attach FRO_LF_DIV to LPI2C1.

enumerator kFRO_HF_DIV_to_LPI2C1: Attach FRO_HF_DIV to LPI2C1.

enumerator kCLK_IN_to_LPI2C1: Attach CLK_IN to LPI2C1.

enumerator kCLK_1M_to_LPI2C1: Attach CLK_1M to LPI2C1.

enumerator kPll1ClkDiv_to_LPI2C1: Attach Pll1ClkDiv to LPI2C1.

enumerator kNONE_to_LPI2C1: Attach NONE to LPI2C1.

enumerator kFRO_LF_DIV_to_LPI2C2: Attach FRO_LF_DIV to LPI2C2.

enumerator kFRO_HF_DIV_to_LPI2C2: Attach FRO_HF_DIV to LPI2C2.

enumerator kCLK_IN_to_LPI2C2: Attach CLK_IN to LPI2C2.

enumerator kCLK_1M_to_LPI2C2: Attach CLK_1M to LPI2C2.

enumerator kPll1ClkDiv_to_LPI2C2: Attach Pll1ClkDiv to LPI2C2.

enumerator kNONE_to_LPI2C2: Attach NONE to LPI2C2.

enumerator kFRO_LF_DIV_to_LPI2C3: Attach FRO_LF_DIV to LPI2C3.

enumerator kFRO_HF_DIV_to_LPI2C3: Attach FRO_HF_DIV to LPI2C3.

enumerator kCLK_IN_to_LPI2C3: Attach CLK_IN to LPI2C3.

enumerator kCLK_1M_to_LPI2C3: Attach CLK_1M to LPI2C3.

enumerator kPll1ClkDiv_to_LPI2C3: Attach Pll1ClkDiv to LPI2C3.

enumerator kNONE_to_LPI2C3: Attach NONE to LPI2C3.

enumerator kFRO_LF_DIV_to_LPI2C4: Attach FRO_LF_DIV to LPI2C4.

enumerator kFRO_HF_DIV_to_LPI2C4: Attach FRO_HF_DIV to LPI2C4.

enumerator kCLK_IN_to_LPI2C4: Attach CLK_IN to LPI2C4.

enumerator kCLK_1M_to_LPI2C4: Attach CLK_1M to LPI2C4.

enumerator kPll1ClkDiv_to_LPI2C4: Attach Pll1ClkDiv to LPI2C4.

enumerator kNONE_to_LPI2C4: Attach NONE to LPI2C4.

enumerator kFRO_LF_DIV_to_LPSPI0: Attach FRO_LF_DIV to LPSPI0.

enumerator kFRO_HF_DIV_to_LPSPI0: Attach FRO_HF_DIV to LPSPI0.

enumerator kCLK_IN_to_LPSPI0: Attach CLK_IN to LPSPI0.

enumerator kCLK_1M_to_LPSPI0: Attach CLK_1M to LPSPI0.

enumerator kPll1ClkDiv_to_LPSPI0: Attach Pll1ClkDiv to LPSPI0.

enumerator kNONE_to_LPSPI0: Attach NONE to LPSPI0.

enumerator kFRO_LF_DIV_to_LPSPI1: Attach FRO_LF_DIV to LPSPI1.

enumerator kFRO_HF_DIV_to_LPSPI1: Attach FRO_HF_DIV to LPSPI1.

enumerator kCLK_IN_to_LPSPI1: Attach CLK_IN to LPSPI1.

enumerator kCLK_1M_to_LPSPI1: Attach CLK_1M to LPSPI1.

enumerator kPll1ClkDiv_to_LPSPI1: Attach Pll1ClkDiv to LPSPI1.

enumerator kNONE_to_LPSPI1: Attach NONE to LPSPI1.

enumerator kFRO_LF_DIV_to_LPSPI2: Attach FRO_LF_DIV to LPSPI2.

enumerator kFRO_HF_DIV_to_LPSPI2: Attach FRO_HF_DIV to LPSPI2.

enumerator kCLK_IN_to_LPSPI2: Attach CLK_IN to LPSPI2.

enumerator kCLK_1M_to_LPSPI2: Attach CLK_1M to LPSPI2.

enumerator kPll1ClkDiv_to_LPSPI2: Attach Pll1ClkDiv to LPSPI2.

enumerator kNONE_to_LPSPI2: Attach NONE to LPSPI2.

enumerator kFRO_LF_DIV_to_LPSPI3: Attach FRO_LF_DIV to LPSPI3.

enumerator kFRO_HF_DIV_to_LPSPI3: Attach FRO_HF_DIV to LPSPI3.

enumerator kCLK_IN_to_LPSPI3: Attach CLK_IN to LPSPI3.

enumerator kCLK_1M_to_LPSPI3: Attach CLK_1M to LPSPI3.

enumerator kPll1ClkDiv_to_LPSPI3: Attach Pll1ClkDiv to LPSPI3.

enumerator kNONE_to_LPSPI3: Attach NONE to LPSPI3.

enumerator kFRO_LF_DIV_to_LPSPI4: Attach FRO_LF_DIV to LPSPI4.

enumerator kFRO_HF_DIV_to_LPSPI4: Attach FRO_HF_DIV to LPSPI4.

enumerator kCLK_IN_to_LPSPI4: Attach CLK_IN to LPSPI4.

enumerator kCLK_1M_to_LPSPI4: Attach CLK_1M to LPSPI4.

enumerator kPll1ClkDiv_to_LPSPI4: Attach Pll1ClkDiv to LPSPI4.

enumerator kNONE_to_LPSPI4: Attach NONE to LPSPI4.

enumerator kFRO_LF_DIV_to_LPSPI5: Attach FRO_LF_DIV to LPSPI5.

enumerator kFRO_HF_DIV_to_LPSPI5: Attach FRO_HF_DIV to LPSPI5.

enumerator kCLK_IN_to_LPSPI5: Attach CLK_IN to LPSPI5.

enumerator kCLK_1M_to_LPSPI5: Attach CLK_1M to LPSPI5.

enumerator kPll1ClkDiv_to_LPSPI5: Attach Pll1ClkDiv to LPSPI5.

enumerator kNONE_to_LPSPI5: Attach NONE to LPSPI5.

enumerator kFRO_LF_DIV_to_LPUART0: Attach FRO_LF_DIV to LPUART0.

enumerator kFRO_HF_DIV_to_LPUART0: Attach FRO_HF_DIV to LPUART0.

enumerator kCLK_IN_to_LPUART0: Attach CLK_IN to LPUART0.

enumerator kLP_OSC_to_LPUART0: Attach LP_OSC to LPUART0.

enumerator kCLK_1M_to_LPUART0: Attach CLK_1M to LPUART0.

enumerator kPll1ClkDiv_to_LPUART0: Attach Pll1ClkDiv to LPUART0.

enumerator kNONE_to_LPUART0: Attach NONE to LPUART0.

enumerator kFRO_LF_DIV_to_LPUART1: Attach FRO_LF_DIV to LPUART1.

enumerator kFRO_HF_DIV_to_LPUART1: Attach FRO_HF_DIV to LPUART1.

enumerator kCLK_IN_to_LPUART1: Attach CLK_IN to LPUART1.

enumerator kLP_OSC_to_LPUART1: Attach LP_OSC to LPUART1.

enumerator kCLK_1M_to_LPUART1: Attach CLK_1M to LPUART1.

enumerator kPll1ClkDiv_to_LPUART1: Attach Pll1ClkDiv to LPUART1.

enumerator kNONE_to_LPUART1: Attach NONE to LPUART1.

enumerator kFRO_LF_DIV_to_LPUART2: Attach FRO_LF_DIV to LPUART2.

enumerator kFRO_HF_DIV_to_LPUART2: Attach FRO_HF_DIV to LPUART2.

enumerator kCLK_IN_to_LPUART2: Attach CLK_IN to LPUART2.

enumerator kLP_OSC_to_LPUART2: Attach LP_OSC to LPUART2.

enumerator kCLK_1M_to_LPUART2: Attach CLK_1M to LPUART2.

enumerator kPll1ClkDiv_to_LPUART2: Attach Pll1ClkDiv to LPUART2.

enumerator kNONE_to_LPUART2: Attach NONE to LPUART2.

enumerator kFRO_LF_DIV_to_LPUART3: Attach FRO_LF_DIV to LPUART3.

enumerator kFRO_HF_DIV_to_LPUART3: Attach FRO_HF_DIV to LPUART3.

enumerator kCLK_IN_to_LPUART3: Attach CLK_IN to LPUART3.

enumerator kLP_OSC_to_LPUART3: Attach LP_OSC to LPUART3.

enumerator kCLK_1M_to_LPUART3: Attach CLK_1M to LPUART3.

enumerator kPll1ClkDiv_to_LPUART3: Attach Pll1ClkDiv to LPUART3.

enumerator kNONE_to_LPUART3: Attach NONE to LPUART3.

enumerator kFRO_LF_DIV_to_LPUART4: Attach FRO_LF_DIV to LPUART4.

enumerator kFRO_HF_DIV_to_LPUART4: Attach FRO_HF_DIV to LPUART4.

enumerator kCLK_IN_to_LPUART4: Attach CLK_IN to LPUART4.

enumerator kLP_OSC_to_LPUART4: Attach LP_OSC to LPUART4.

enumerator kCLK_1M_to_LPUART4: Attach CLK_1M to LPUART4.

enumerator kPll1ClkDiv_to_LPUART4: Attach Pll1ClkDiv to LPUART4.

enumerator kNONE_to_LPUART4: Attach NONE to LPUART4.

enumerator kFRO_LF_DIV_to_LPUART5: Attach FRO_LF_DIV to LPUART5.

enumerator kFRO_HF_DIV_to_LPUART5: Attach FRO_HF_DIV to LPUART5.

enumerator kCLK_IN_to_LPUART5: Attach CLK_IN to LPUART5.

enumerator kLP_OSC_to_LPUART5: Attach LP_OSC to LPUART5.

enumerator kCLK_1M_to_LPUART5: Attach CLK_1M to LPUART5.

enumerator kPll1ClkDiv_to_LPUART5: Attach Pll1ClkDiv to LPUART5.

enumerator kNONE_to_LPUART5: Attach NONE to LPUART5.

enumerator kCLK_32K_to_USBHS: Attach FRO_HF to USBHS.

enumerator kCLK_1M_to_USBHS: Attach CLK_IN to USBHS.

enumerator kPHY_CLK_XTAL_to_USBHS: Attach CLK_IN to USBHS.

enumerator kNONE_to_USBHS: Attach NONE to USBHS.

enumerator kFRO_HF_to_USBHS_PHY: Attach FRO_HF to USBHS_PHY.

enumerator kCLK_IN_to_USBHS_PHY: Attach CLK_IN to USBHS_PHY.

enumerator kNONE_to_USBHS_PHY: Attach NONE to USBHS_PHY.

enumerator kFRO_LF_DIV_to_LPTMR0: Attach FRO_LF_DIV to LPTMR0.

enumerator kFRO_HF_DIV_to_LPTMR0: Attach FRO_HF_DIV to LPTMR0.

enumerator kCLK_IN_to_LPTMR0: Attach CLK_IN to LPTMR0.

enumerator kCLK_1M_to_LPTMR0: Attach CLK_1M to LPTMR0.

enumerator kPll1ClkDiv_to_LPTMR0: Attach Pll1ClkDiv to LPTMR0.

enumerator kNONE_to_LPTMR0: Attach NONE to LPTMR0.

enumerator kCLK_16K_to_OSTIMER: Attach FRO16K to OSTIMER0.

enumerator kCLK_1M_to_OSTIMER: Attach CLK_1M to OSTIMER0.

enumerator kNONE_to_OSTIMER: Attach NONE to OSTIMER0.

enumerator kFRO_LF_DIV_to_ADC: Attach FRO_LF_DIV to ADC.

enumerator kFRO_HF_to_ADC: Attach FRO_HF to ADC.

enumerator kCLK_IN_to_ADC: Attach CLK_IN to ADC.

enumerator kUSB_PLL_to_ADC: Attach USB_PL to ADC.

enumerator kCLK_1M_to_ADC: Attach CLK_1M to ADC.

enumerator kPll1ClkDiv_to_ADC: Attach Pll1ClkDiv to ADC.

enumerator kNONE_to_ADC: Attach NONE to ADC.

enumerator kFRO_LF_DIV_to_CMP0: Attach FRO_LF_DIV to CMP0.

enumerator kFRO_HF_DIV_to_CMP0: Attach FRO_HF_DIV to CMP0.

enumerator kCLK_IN_to_CMP0: Attach CLK_IN to CMP0.

enumerator kCLK_1M_to_CMP0: Attach CLK_1M to CMP0.

enumerator kPll1ClkDiv_to_CMP0: Attach Pll1ClkDiv to CMP0.

enumerator kNONE_to_CMP0: Attach NONE to CMP0.

enumerator kCPU_CLK_to_TRACE: Attach CPU_CLK to TRACE.

enumerator kCLK_1M_to_TRACE: Attach CLK_1M to TRACE.

enumerator kCLK_16K_to_TRACE: Attach CLK_16K to TRACE.

enumerator kNONE_to_TRACE: Attach NONE to TRACE.

enumerator kFRO12M_to_CLKOUT: Attach FRO_12M to CLKOUT.

enumerator kFRO_HF_DIV_to_CLKOUT: Attach FRO_HF_DIV to CLKOUT.

enumerator kCLK_IN_to_CLKOUT: Attach CLK_IN to CLKOUT.

enumerator kLP_OSC_to_CLKOUT: Attach LP_OSC to CLKOUT.

enumerator kPll1ClkDiv_to_CLKOUT: Attach Pll1Clk to CLKOUT.

enumerator kSLOW_CLK_to_CLKOUT: Attach SLOW_CLK to CLKOUT.

enumerator kNONE_to_CLKOUT: Attach NONE to CLKOUT.

enumerator kCPU_CLK_to_SYSTICK: Attach CPU_CLK to SYSTICK.

enumerator kCLK_1M_to_SYSTICK: Attach CLK_1M to SYSTICK.

enumerator kCLK_16K_to_SYSTICK: Attach CLK_16K to SYSTICK.

enumerator kNONE_to_SYSTICK: Attach NONE to SYSTICK.

enumerator kCLK_16K_to_WWDT1: Attach CLK_16K to WWDT1.

enumerator kFRO_HF_DIV_to_WWDT1: Attach FRO_HF_DIV to WWDT1.

enumerator kCLK_1M_to_WWDT1: Attach CLK_1M to WWDT1.

enumerator kCLK_IN_to_TENBASET_PHY: Attach CLK_IN to TENBASET_PHY.

enumerator kPll1Clk_to_TENBASET_PHY: Attach Pll1Clk to TENBASET_PHY.

enumerator kNONE_to_TENBASET_PHY: Attach NONE to TENBASET_PHY.

enumerator kFRO_HF_to_ESPI: Attach FRO_HF to ESPI.

enumerator kPll1ClkDiv_to_ESPI: Attach Pll1ClkDiv to ESPI.

enumerator kNONE_to_ESPI: Attach NONE to ESPI.

enumerator kFRO_HF_to_FLEXSPI: Attach FRO_HF to FLEXSPI.

enumerator kUSB_PFD_to_FLEXSPI: Attach USB_PFD to FLEXSPI.

enumerator kPll1Clk_to_FLEXSPI: Attach Pll1Clk to FLEXSPI.

enumerator kNONE_to_FLEXSPI: Attach NONE to FLEXSPI.

enumerator kFRO_LF_DIV_to_TSI0: Attach FRO_LF_DIV to TSI0.

enumerator kFRO_HF_DIV_to_TSI0: Attach FRO_HF_DIV to TSI0.

enumerator kCLK_IN_to_TSI0: Attach CLK_IN to TSI0.

enumerator kCLK_1M_to_TSI0: Attach CLK_1M to TSI0.

enumerator kPll1ClkDiv_to_TSI0: Attach Pll1ClkDiv to TSI0.

enumerator kNONE_to_TSI0: Attach NONE to TSI0.

enumerator kCLK_IN_to_ENETRMII: Attach CLK_IN to ENETRMII.

enumerator kPll1Clk_to_ENETRMII: Attach Pll1Clk to ENETRMII.

enumerator kNONE_to_ENETRMII: Attach NONE to ENETRMII.

enumerator kCLK_IN_to_ENETPTPREF: Attach LK_IN to ENETPTPREF.

enumerator kENET0_TX_CLK_to_ENETPTPREF: Attach ENET0_TX_CLK to ENETPTPREF.

enumerator kPll1Clk_to_ENETPTPREF: Attach Pll1Clk to ENETRMII.

enumerator kNONE_to_ENETPTPREF: Attach NONE to ENETPTPREF.

enumerator kNONE_to_NONE: Attach NONE to NONE.

enum _clock_div_name

Clock dividers.

Values:

enumerator kCLOCK_DivI3C0_FCLK: I3C0_FCLK clock divider

enumerator kCLOCK_DivI3C1_FCLK: I3C1_FCLK clock divider

enumerator kCLOCK_DivCTIMER0: CTIMER0 clock divider

enumerator kCLOCK_DivCTIMER1: CTIMER1 clock divider

enumerator kCLOCK_DivCTIMER2: CTIMER2 clock divider

enumerator kCLOCK_DivCTIMER3: CTIMER3 clock divider

enumerator kCLOCK_DivCTIMER4: CTIMER4 clock divider

enumerator kCLOCK_DivWWDT0: WWDT0 clock divider

enumerator kCLOCK_DivWWDT1: WWDT1 clock divider

enumerator kCLOCK_DivE1588: E1588 clock divider

enumerator kCLOCK_DivRMII: RMII clock divider

enumerator kCLOCK_DivESPI0: ESPI0 clock divider

enumerator kCLOCK_DivFLEXSPI0: FLEXSPI0 clock divider

enumerator kCLOCK_DivLPSPI2: LPSPI2 clock divider

enumerator kCLOCK_DivLPSPI3: LPSPI3 clock divider

enumerator kCLOCK_DivLPSPI4: LPSPI4 clock divider

enumerator kCLOCK_DivLPSPI5: LPSPI5 clock divider

enumerator kCLOCK_DivTENBASET_PHY0: TENBASET_PHY0 clock divider

enumerator kCLOCK_DivUSBHS_PHY: USBHS_PHY clock divider

enumerator kCLOCK_DivFLEXIO0: FLEXIO0 clock divider

enumerator kCLOCK_DivLPI2C0: LPI2C0 clock divider

enumerator kCLOCK_DivLPI2C1: LPI2C1 clock divider

enumerator kCLOCK_DivLPSPI0: LPSPI0 clock divider

enumerator kCLOCK_DivLPSPI1: LPSPI1 clock divider

enumerator kCLOCK_DivI3C2_FCLK: I3C2_FCLK clock divider

enumerator kCLOCK_DivLPUART0: LPUART0 clock divider

enumerator kCLOCK_DivLPUART1: LPUART1 clock divider

enumerator kCLOCK_DivLPUART2: LPUART2 clock divider

enumerator kCLOCK_DivLPUART3: LPUART3 clock divider

enumerator kCLOCK_DivLPUART4: LPUART4 clock divider

enumerator kCLOCK_DivLPTMR0: LPTMR0 clock divider

enumerator kCLOCK_DivADC: ADCx clock divider

enumerator kCLOCK_DivCMP0_FUNC: CMP0_FUNC clock divider

enumerator kCLOCK_DivCMP0_RR: CMP0_RR clock divider

enumerator kCLOCK_DivDAC0: DAC0 clock divider

enumerator kCLOCK_DivDAC1: DAC1 clock divider

enumerator kCLOCK_DivTSI0: TSI0 clock divider

enumerator kCLOCK_DivFLEXCAN0: FLEXCAN0 clock divider

enumerator kCLOCK_DivFLEXCAN1: FLEXCAN1 clock divider

enumerator kCLOCK_DivLPI2C2: LPI2C2 clock divider

enumerator kCLOCK_DivLPI2C3: LPI2C3 clock divider

enumerator kCLOCK_DivLPI2C4: LPI2C4 clock divider

enumerator kCLOCK_DivLPUART5: LPUART5 clock divider

enumerator kCLOCK_DivI3C3_FCLK: I3C3_FCLK clock divider

enumerator kCLOCK_DivTRACE: TRACE clock divider

enumerator kCLOCK_DivCLKOUT: CLKOUT clock divider

enumerator kCLOCK_DivSYSTICK: SYSTICK clock divider

enumerator kCLOCK_DivSLOWCLK: SLOWCLK clock divider

enumerator kCLOCK_DivBUSCLK: BUSCLK clock divider

enumerator kCLOCK_DivAHBCLK: AHBCLK clock divider

enumerator kCLOCK_DivFRO_HF: FROHF clock divider

enumerator kCLOCK_DivFRO_LF: FROLF clock divider

enumerator kCLOCK_DivPLL1CLK: PLL1CLK clock divider

enum _clke_16k

FRO16K connection to each power domain.

Values:

enumerator kCLKE_16K_SYSTEM: To VSYS domain.

enumerator kCLKE_16K_COREMAIN: To VDD_CORE domain.

enumerator kCLKE_16K_VBAT: To VBAT domain.

enumerator kCLKE_16K_ALL: To VSYS,VDD_CORE,VBAT domain.

enum _scg_status

SCG status return codes.

Values:

enumerator kStatus_SCG_Busy: Clock is busy.

enumerator kStatus_SCG_InvalidSrc: Invalid source.

enum _sirc_trim_mode

sirc trim mode.

Values:

enumerator kSCG_SircTrimNonUpdate: Trim enable but not enable trim value update. In this mode, the trim value is fixed to the initialized value which is defined by trimCoar and trimFine in configure structure sirc_trim_mode_t.

enumerator kSCG_SircTrimUpdate: Trim enable and trim value update enable. In this mode, the trim value is auto update.

enum _sirc_trim_src

sirc trim source.

Values:

enumerator kNoTrimSrc: No external tirm source.

enumerator kSCG_SircTrimSrcSysOsc: System OSC.

enum _scg_sosc_monitor_mode

SCG system OSC monitor mode.

Values:

enumerator kSCG_SysOscMonitorDisable: Monitor disabled.

enumerator kSCG_SysOscMonitorInt: Interrupt when the SOSC error is detected.

enumerator kSCG_SysOscMonitorReset: Reset when the SOSC error is detected.

enum _scg_pll1_monitor_mode

SCG PLL1 monitor mode.

Values:

enumerator kSCG_Pll1MonitorDisable: Monitor disabled.

enumerator kSCG_Pll1MonitorInt: Interrupt when the PLL1 Clock error is detected.

enumerator kSCG_Pll1MonitorReset: Reset when the PLL1 Clock error is detected.

enum _run_mode

The active run mode (voltage level).

Values:

enumerator kMD_Mode: Middle driver mode, VDD_CORE: 1.0V

enumerator kSD_Mode: Standard driver mode,VDD_CORE: 1.1V

enumerator kOD_Mode: Over drive mode, VDD_CORE: 1.2V

enum _osc32k_clk_gate_id

OSC32K clock gate.

Values:

enumerator kCLOCK_Osc32kToSys: OSC32K[0] to SYSTEM domain.

enumerator kCLOCK_Osc32kToCore: OSC32K[1] to CORE domain.

enumerator kCLOCK_Osc32kToVbat: OSC32K[2] to VBAT domain.

enumerator kCLOCK_Osc32kToAll: OSC32K to SYSTEM,CORE,VBAT domain.

enum _vbat_osc_xtal_cap

The enumerator of internal capacitance of OSC’s XTAL pin.

Values:

enumerator kVBAT_OscXtal0pFCap: The internal capacitance for XTAL pin is 0pF.

enumerator kVBAT_OscXtal2pFCap: The internal capacitance for XTAL pin is 2pF.

enumerator kVBAT_OscXtal4pFCap: The internal capacitance for XTAL pin is 4pF.

enumerator kVBAT_OscXtal6pFCap: The internal capacitance for XTAL pin is 6pF.

enumerator kVBAT_OscXtal8pFCap: The internal capacitance for XTAL pin is 8pF.

enumerator kVBAT_OscXtal10pFCap: The internal capacitance for XTAL pin is 10pF.

enumerator kVBAT_OscXtal12pFCap: The internal capacitance for XTAL pin is 12pF.

enumerator kVBAT_OscXtal14pFCap: The internal capacitance for XTAL pin is 14pF.

enumerator kVBAT_OscXtal16pFCap: The internal capacitance for XTAL pin is 16pF.

enumerator kVBAT_OscXtal18pFCap: The internal capacitance for XTAL pin is 18pF.

enumerator kVBAT_OscXtal20pFCap: The internal capacitance for XTAL pin is 20pF.

enumerator kVBAT_OscXtal22pFCap: The internal capacitance for XTAL pin is 22pF.

enumerator kVBAT_OscXtal24pFCap: The internal capacitance for XTAL pin is 24pF.

enumerator kVBAT_OscXtal26pFCap: The internal capacitance for XTAL pin is 26pF.

enumerator kVBAT_OscXtal28pFCap: The internal capacitance for XTAL pin is 28pF.

enumerator kVBAT_OscXtal30pFCap: The internal capacitance for XTAL pin is 30pF.

enum _vbat_osc_extal_cap

The enumerator of internal capacitance of OSC’s EXTAL pin.

Values:

enumerator kVBAT_OscExtal0pFCap: The internal capacitance for EXTAL pin is 0pF.

enumerator kVBAT_OscExtal2pFCap: The internal capacitance for EXTAL pin is 2pF.

enumerator kVBAT_OscExtal4pFCap: The internal capacitance for EXTAL pin is 4pF.

enumerator kVBAT_OscExtal6pFCap: The internal capacitance for EXTAL pin is 6pF.

enumerator kVBAT_OscExtal8pFCap: The internal capacitance for EXTAL pin is 8pF.

enumerator kVBAT_OscExtal10pFCap: The internal capacitance for EXTAL pin is 10pF.

enumerator kVBAT_OscExtal12pFCap: The internal capacitance for EXTAL pin is 12pF.

enumerator kVBAT_OscExtal14pFCap: The internal capacitance for EXTAL pin is 14pF.

enumerator kVBAT_OscExtal16pFCap: The internal capacitance for EXTAL pin is 16pF.

enumerator kVBAT_OscExtal18pFCap: The internal capacitance for EXTAL pin is 18pF.

enumerator kVBAT_OscExtal20pFCap: The internal capacitance for EXTAL pin is 20pF.

enumerator kVBAT_OscExtal22pFCap: The internal capacitance for EXTAL pin is 22pF.

enumerator kVBAT_OscExtal24pFCap: The internal capacitance for EXTAL pin is 24pF.

enumerator kVBAT_OscExtal26pFCap: The internal capacitance for EXTAL pin is 26pF.

enumerator kVBAT_OscExtal28pFCap: The internal capacitance for EXTAL pin is 28pF.

enumerator kVBAT_OscExtal30pFCap: The internal capacitance for EXTAL pin is 30pF.

enum _vbat_osc_fine_adjustment_value

The enumerator of osc amplifier gain fine adjustment. Changes the oscillator amplitude by modifying the automatic gain control (AGC).

Values:

enumerator kVBAT_OscCoarseAdjustment05

enumerator kVBAT_OscCoarseAdjustment10

enumerator kVBAT_OscCoarseAdjustment18

enumerator kVBAT_OscCoarseAdjustment33

enum _vbat_osc_init_trim

The enumerator of Initialization Trim.

Values:

enumerator kVBAT_OscInitTrim8000ms: Configures the start-up time of the oscillator to 8s.

enumerator kVBAT_OscInitTrim4000ms: Configures the start-up time of the oscillator to 4s.

enumerator kVBAT_OscInitTrim2000ms: Configures the start-up time of the oscillator to 2s.

enumerator kVBAT_OscInitTrim1000ms: Configures the start-up time of the oscillator to 1s.

enumerator kVBAT_OscInitTrim500ms: Configures the start-up time of the oscillator to 0.5s.

enumerator kVBAT_OscInitTrim250ms: Configures the start-up time of the oscillator to 0.25s.

enumerator kVBAT_OscInitTrim125ms: Configures the start-up time of the oscillator to 0.125s.

enumerator kVBAT_OscInitTrimHalfms: Configures the start-up time of the oscillator to 0.5ms.

enum _vbat_osc_cap_trim

The enumerator of Capacitor Trim.

Values:

enumerator kVBAT_OscCapTrimDefault

enumerator kVBAT_OscCapTrim1us

enumerator kVBAT_OscCapTrim2us

enumerator kVBAT_OscCapTrim2andhalfus

enum _vbat_osc_dly_trim

The enumerator of Delay Trim.

Values:

enumerator kVBAT_OscDlyTrim0: P current 9(nA) and N Current 6(nA).

enumerator kVBAT_OscDlyTrim1: P current 13(nA) and N Current 6(nA).

enumerator kVBAT_OscDlyTrim3: P current 4(nA) and N Current 6(nA).

enumerator kVBAT_OscDlyTrim4: P current 9(nA) and N Current 4(nA).

enumerator kVBAT_OscDlyTrim5: P current 13(nA) and N Current 4(nA).

enumerator kVBAT_OscDlyTrim6: P current 4(nA) and N Current 4(nA).

enumerator kVBAT_OscDlyTrim7: P current 9(nA) and N Current 2(nA).

enumerator kVBAT_OscDlyTrim8: P current 13(nA) and N Current 2(nA).

enumerator kVBAT_OscDlyTrim9: P current 4(nA) and N Current 2(nA).

enum _vbat_osc_cap2_trim

The enumerator of CAP2_TRIM.

Values:

enumerator kVBAT_OscCap2Trim0

enumerator kVBAT_OscCap2Trim1

enum _vbat_osc_cmp_trim

The enumerator of Comparator Trim.

Values:

enumerator kVBAT_OscCmpTrim760mv

enumerator kVBAT_OscCmpTrim770mv

enumerator kVBAT_OscCmpTrim740mv

enum _vbat_osc_mode_en

The enumerator of configures Crystal Oscillator mode..

Values:

enumerator kVBAT_OscNormalModeEnable

enumerator kVBAT_OscStartupModeEnable

enumerator kVBAT_OscLowpowerModeEnable

enum _pfd_clkout_selection_t

Source of PFD Clock Selection.

Values:

enumerator kPFDOUT_UsbPllRef

enumerator kPFDOUT_PfdClkDiv4

enumerator kPFDOUT_PfdClkDiv2

enumerator kPFDOUT_PfdClk

enum _pll_clk_src

PLL clock source.

Values:

enumerator kPll_ClkSrcSysOsc: System OSC.

enumerator kPll_ClkSrcFirc: Fast IRC.

enumerator kPll_ClkSrcSirc: Slow IRC.

enum _ss_progmodfm

PLL Spread Spectrum (SS) Programmable modulation frequency See (MF) field in the PLL0SSCG1 register in the UM.

Values:

enumerator kSS_MF_512: Nss = 512 (fm ~= 3.9 - 7.8 kHz)

enumerator kSS_MF_384: Nss ~= 384 (fm ~= 5.2 - 10.4 kHz)

enumerator kSS_MF_256: Nss = 256 (fm ~= 7.8 - 15.6 kHz)

enumerator kSS_MF_128: Nss = 128 (fm ~= 15.6 - 31.3 kHz)

enumerator kSS_MF_64: Nss = 64 (fm ~= 32.3 - 64.5 kHz)

enumerator kSS_MF_32: Nss = 32 (fm ~= 62.5 - 125 kHz)

enumerator kSS_MF_24: Nss ~= 24 (fm ~= 83.3 - 166.6 kHz)

enumerator kSS_MF_16: Nss = 16 (fm ~= 125 - 250 kHz)

enum _ss_progmoddp

PLL Spread Spectrum (SS) Programmable frequency modulation depth See (MR) field in the PLL0SSCG1 register in the UM.

Values:

enumerator kSS_MR_K0: k = 0 (no spread spectrum)

enumerator kSS_MR_K1: k ~= 1

enumerator kSS_MR_K1_5: k ~= 1.5

enumerator kSS_MR_K2: k ~= 2

enumerator kSS_MR_K3: k ~= 3

enumerator kSS_MR_K4: k ~= 4

enumerator kSS_MR_K6: k ~= 6

enumerator kSS_MR_K8: k ~= 8

enum _ss_modwvctrl

PLL Spread Spectrum (SS) Modulation waveform control See (MC) field in the PLL0SSCG1 register in the UM.

Compensation for low pass filtering of the PLL to get a triangular modulation at the output of the PLL, giving a flat frequency spectrum.

Values:

enumerator kSS_MC_NOC: no compensation

enumerator kSS_MC_RECC: recommended setting

enumerator kSS_MC_MAXC: max. compensation

enum _pll_error

PLL status definitions.

Values:

enumerator kStatus_PLL_Success: PLL operation was successful

enumerator kStatus_PLL_OutputTooLow: PLL output rate request was too low

enumerator kStatus_PLL_OutputTooHigh: PLL output rate request was too high

enumerator kStatus_PLL_OutputError: PLL output rate error

enumerator kStatus_PLL_InputTooLow: PLL input rate is too low

enumerator kStatus_PLL_InputTooHigh: PLL input rate is too high

enumerator kStatus_PLL_OutsideIntLimit: Requested output rate isn’t possible

enumerator kStatus_PLL_CCOTooLow: Requested CCO rate isn’t possible

enumerator kStatus_PLL_CCOTooHigh: Requested CCO rate isn’t possible

typedef enum _clock_ip_name clock_ip_name_t: Clock gate name used for CLOCK_EnableClock/CLOCK_DisableClock.

typedef enum _clock_name clock_name_t: Clock name used to get clock frequency.

typedef enum _clock_select_name clock_select_name_t: Clock name used to get clock frequency.

typedef enum _clock_attach_id clock_attach_id_t: The enumerator of clock attach Id.

typedef enum _clock_div_name clock_div_name_t

Clock dividers.

MAX clock divider

typedef enum _clke_16k clke_16k_t: FRO16K connection to each power domain.

typedef enum _sirc_trim_mode sirc_trim_mode_t: sirc trim mode.

typedef enum _sirc_trim_src sirc_trim_src_t: sirc trim source.

typedef struct _sirc_trim_config sirc_trim_config_t: sirc trim configuration.

typedef enum _scg_sosc_monitor_mode scg_sosc_monitor_mode_t: SCG system OSC monitor mode.

typedef enum _scg_pll1_monitor_mode scg_pll1_monitor_mode_t: SCG PLL1 monitor mode.

typedef enum _run_mode run_mode_t: The active run mode (voltage level).

typedef enum _osc32k_clk_gate_id osc32k_clk_gate_id_t: OSC32K clock gate.

typedef enum _vbat_osc_xtal_cap vbat_osc_xtal_cap_t: The enumerator of internal capacitance of OSC’s XTAL pin.

typedef enum _vbat_osc_extal_cap vbat_osc_extal_cap_t: The enumerator of internal capacitance of OSC’s EXTAL pin.

typedef enum _vbat_osc_fine_adjustment_value vbat_osc_coarse_adjustment_value_t: The enumerator of osc amplifier gain fine adjustment. Changes the oscillator amplitude by modifying the automatic gain control (AGC).

typedef struct _vbat_osc_config vbat_osc_config_t: The structure of oscillator configuration.

typedef enum _vbat_osc_init_trim vbat_osc_init_trim_t: The enumerator of Initialization Trim.

typedef enum _vbat_osc_cap_trim vbat_osc_cap_trim_t: The enumerator of Capacitor Trim.

typedef enum _vbat_osc_dly_trim vbat_osc_dly_trim_t: The enumerator of Delay Trim.

typedef enum _vbat_osc_cap2_trim vbat_osc_cap2_trim_t: The enumerator of CAP2_TRIM.

typedef enum _vbat_osc_cmp_trim vbat_osc_cmp_trim_t: The enumerator of Comparator Trim.

typedef enum _vbat_osc_mode_en vbat_osc_mode_en_t: The enumerator of configures Crystal Oscillator mode..

typedef struct _osc_32k_config osc_32k_config_t: The structure of oscillator configuration.

typedef enum _pfd_clkout_selection_t pfd_clkout_selection_t: Source of PFD Clock Selection.

typedef enum _pll_clk_src pll_clk_src_t: PLL clock source.

typedef enum _ss_progmodfm ss_progmodfm_t: PLL Spread Spectrum (SS) Programmable modulation frequency See (MF) field in the PLL0SSCG1 register in the UM.

typedef enum _ss_progmoddp ss_progmoddp_t: PLL Spread Spectrum (SS) Programmable frequency modulation depth See (MR) field in the PLL0SSCG1 register in the UM.

typedef enum _ss_modwvctrl ss_modwvctrl_t

PLL Spread Spectrum (SS) Modulation waveform control See (MC) field in the PLL0SSCG1 register in the UM.

Compensation for low pass filtering of the PLL to get a triangular modulation at the output of the PLL, giving a flat frequency spectrum.

typedef struct _pll_config pll_config_t

PLL configuration structure.

This structure can be used to configure the settings for a PLL setup structure. Fill in the desired configuration for the PLL and call the PLL setup function to fill in a PLL setup structure.

typedef struct _pll_setup pll_setup_t: PLL0 setup structure This structure can be used to pre-build a PLL setup configuration at run-time and quickly set the PLL to the configuration. It can be populated with the PLL setup function. If powering up or waiting for PLL lock, the PLL input clock source should be configured prior to PLL setup.

typedef enum _pll_error pll_error_t: PLL status definitions.

static inline void CLOCK_EnableClock(clock_ip_name_t clk)

Enable the clock for specific IP.

Parameters:

clk – : Clock to be enabled.

Returns:

Nothing

static inline void CLOCK_DisableClock(clock_ip_name_t clk)

Disable the clock for specific IP.

Parameters:

clk – : Clock to be Disabled.

Returns:

Nothing

void CLOCK_AttachClk(clock_attach_id_t connection)

Configure the clock selection muxes.

Parameters:

connection – : Clock to be configured.

clock_attach_id_t CLOCK_GetClockAttachId(clock_attach_id_t connection)

Get the actual clock attach id. This fuction uses the offset in input attach id, then it reads the actual source value in the register and combine the offset to obtain an actual attach id.

Parameters:

connection – : Clock attach id to get.

Returns:

Clock source value.

void CLOCK_SetClockSelect(clock_select_name_t sel_name, uint32_t value)

Set the clock select value. This fuction set the peripheral clock select value.

Parameters:

sel_name – : Clock select.
value – : value to be set.

uint32_t CLOCK_GetClockSelect(clock_select_name_t sel_name)

Get the clock select value. This fuction get the peripheral clock select value.

Parameters:

sel_name – : Clock select.

Returns:

Clock source value.

void CLOCK_SetClockDiv(clock_div_name_t div_name, uint32_t value)

Setup peripheral clock dividers.

Parameters:

div_name – : Clock divider name
value – : Value to be divided

uint32_t CLOCK_GetClockDiv(clock_div_name_t div_name)

Get peripheral clock dividers.

Parameters:

div_name – : Clock divider name

Returns:

peripheral clock dividers

void CLOCK_HaltClockDiv(clock_div_name_t div_name)

Halt peripheral clock dividers.

Parameters:

div_name – : Clock divider name

status_t CLOCK_SetupFROHFClocking(uint32_t iFreq)

Initialize the FROHF to given frequency (48,64,96,192). This function turns on FIRC and select the given frequency as the source of fro_hf.

Parameters:

iFreq – : Desired frequency.

Returns:

returns success or fail status.

status_t CLOCK_SetupFRO12MClocking(void)

Initialize the FRO12M. This function turns on FRO12M.

Returns:: returns success or fail status.

status_t CLOCK_SetupFRO16KClocking(uint8_t clk_16k_enable_mask)

Initialize the FRO16K. This function turns on FRO16K.

Parameters:

clk_16k_enable_mask – 0-7 0: disable, 1: disable bit0 is for clk_16k0 bit1 is for clk_16k1 bit2 is for clk_16k2

Returns:

returns success or fail status.

status_t CLOCK_SetupExtClocking(uint32_t iFreq)

Initialize the external osc clock to given frequency.

Parameters:

iFreq – : Desired frequency (must be equal to exact rate in Hz)

Returns:

returns success or fail status.

status_t CLOCK_SetupExtRefClocking(uint32_t iFreq)

Initialize the external reference clock to given frequency.

Parameters:

iFreq – : Desired frequency (must be equal to exact rate in Hz)

Returns:

returns success or fail status.

status_t CLOCK_SetupOsc32KClocking(uint32_t id)

Initialize the XTAL32/EXTAL32 input clock to given frequency.

Parameters:

id – : OSC 32 kHz output clock to specified modules, it should use osc32k_clk_gate_id_t value

Returns:

returns success or fail status.

void CLOCK_GetDefaultOsc32KConfig(osc_32k_config_t *config)

Get default XTAL32/EXTAL32 clock configuration structure. This function initializes the osc 32k configuration structure to a default value. The default values are: config->initTrim = kVBAT_OscInitTrim500ms; config->capTrim = kVBAT_OscCapTrimDefault; config->dlyTrim = kVBAT_OscDlyTrim5; config->cap2Trim = kVBAT_OscCap2Trim0; config->cmpTrim = kVBAT_OscCmpTrim760mv; config->mode = kVBAT_OscNormalModeEnable; config->xtalCap = kVBAT_OscXtal24pFCap; config->extalCap = kVBAT_OscExtal22pFCap; config->ampGain = kVBAT_OscCoarseAdjustment05; config->id = kCLOCK_Osc32kToVbat;.

Parameters:

config – Pointer to a configuration structure

status_t CLOCK_SetupOsc32KClockingConfig(osc_32k_config_t config)

Initialize the OSC 32K with user-defined settings.

Parameters:

config – : OSC 32K configuration structure

Returns:

returns success or fail status.

uint32_t CLOCK_GetFreq(clock_name_t clockName)

Return Frequency of selected clock.

Returns:: Frequency of selected clock

uint32_t CLOCK_GetCoreSysClkFreq(void)

Return Frequency of core.

Returns:: Frequency of the core

uint32_t CLOCK_GetCTimerClkFreq(uint32_t id)

Return Frequency of CTimer functional Clock.

Returns:: Frequency of CTimer functional Clock

uint32_t CLOCK_GetLpi2cClkFreq(uint32_t id)

Return Frequency of LPI2C0 functional Clock.

Returns:: Frequency of LPI2C0 functional Clock

uint32_t CLOCK_GetLpspiClkFreq(uint32_t id)

Return Frequency of LPSPI functional Clock.

Returns:: Frequency of LPSPI functional Clock

uint32_t CLOCK_GetLpuartClkFreq(uint32_t id)

Return Frequency of LPUART functional Clock.

Returns:: Frequency of LPUART functional Clock

uint32_t CLOCK_GetI3CFClkFreq(uint32_t id)

Return Frequency of I3C Clock.

Returns:: Frequency of I3C Clock

uint32_t CLOCK_GetLptmrClkFreq(void)

Return Frequency of LPTMR functional Clock.

Returns:: Frequency of LPTMR functional Clock

uint32_t CLOCK_GetOstimerClkFreq(void)

Return Frequency of OSTIMER.

Returns:: Frequency of OSTIMER Clock

uint32_t CLOCK_GetAdcClkFreq(uint32_t id)

Return Frequency of Adc Clock.

Returns:: Frequency of Adc.

uint32_t CLOCK_GetCmpFClkFreq(void)

Return Frequency of CMP Function Clock.

Returns:: Frequency of CMP Function.

uint32_t CLOCK_GetCmpRRClkFreq(uint32_t id)

Return Frequency of CMP Round Robin Clock.

Returns:: Frequency of CMP Round Robin.

uint32_t CLOCK_GetTraceClkFreq(void)

Return Frequency of Trace Clock.

Returns:: Frequency of Trace.

uint32_t CLOCK_GetClkoutClkFreq(void)

Return Frequency of CLKOUT Clock.

Returns:: Frequency of CLKOUT.

uint32_t CLOCK_GetSystickClkFreq(void)

Return Frequency of Systick Clock.

Returns:: Frequency of Systick.

uint32_t CLOCK_GetWwdt0ClkFreq(void): brief Return Frequency of WWDT0 Clock return Frequency of WWDT0.

uint32_t CLOCK_GetWwdt1ClkFreq(void): brief Return Frequency of WWDT1 Clock return Frequency of WWDT1.

uint32_t CLOCK_GetFlexcanClkFreq(uint32_t id)

Return Frequency of FlexCAN CLK.

Returns:: Frequency of FlexCAN CLK.

uint32_t CLOCK_GetFlexspiClkFreq(void)

Return Frequency of Flexspi CLK.

Returns:: Frequency of Flexspi CLK.

uint32_t CLOCK_GetTsiClkFreq(void)

Return Frequency of TSI CLK.

Returns:: Frequency of TSI CLK.

uint32_t CLOCK_GetEnetRmiiClkFreq(void)

Return Frequency of ENET MRR CLK.

Returns:: Frequency of ENET MRR CLK.

uint32_t CLOCK_GetEnetPtpRefClkFreq(void)

Return Frequency of ENET PTP REF CLK.

Returns:: Frequency of ENET PTP REF CLK.

uint32_t CLOCK_GetTenbaset_PhyClkFreq(void)

Return Frequency of TENBASET_PHY CLK.

Returns:: Frequency of TENBASET_PHY CLK.

uint32_t CLOCK_GetEspiClkFreq(void)

Return Frequency of ESPI CLK.

Returns:: Frequency of ESPI CLK.

uint32_t CLOCK_GetFlexioClkFreq(void)

Return Frequency of FLEXIO FCLK.

Returns:: Frequency of FLEXIO FCLK.

void CLOCK_SetupEnetTxClk(uint32_t iFreq)

Initialize the ENET TX CLK to given frequency.

Parameters:

iFreq – : Desired frequency

Returns:

Nothing

uint32_t CLOCK_GetEnetTxClkFreq(void)

Return Frequency of ENET TX CLK.

Returns:: Frequency of ENET TX CLK

bool CLOCK_EnableUsbhsPhyPllClock(uint32_t clockSourceFreq)

Enable USB HS PHY PLL clock.

This function enables the USB HS PHY PLL clock.

Parameters:

clockSourceFreq – Frequency value.

Returns:

true if success, false if failure.

void CLOCK_DisableUsbhsPhyPllClock(void)

Disable USB HS PHY PLL clock.

This function disables the USB HS PHY PLL clock.

bool CLOCK_EnableUsbhsClock(void)

Enable USB HS clock.

This function enables the USB HS clock.

Returns:: true if success, false if failure.

bool CLOCK_EnableUsbhsPhyPfdClock(uint32_t pfdDiv, pfd_clkout_selection_t pfdClkSel)

Enable USB HS PHY PFD clock.

This function enables the USB HS PHY PFD clock.

Parameters:

pfdDiv – PFD fractional divider value.
pfdClkSel – PFD clock output selection.

Returns:

true if success, false if failure.

status_t CLOCK_FRO12MTrimConfig(sirc_trim_config_t config)

Setup FRO 12M trim.

Parameters:

config – : FRO 12M trim value

Returns:

returns success or fail status.

void CLOCK_SetSysOscMonitorMode(scg_sosc_monitor_mode_t mode)

Sets the system OSC monitor mode.

This function sets the system OSC monitor mode. The mode can be disabled, it can generate an interrupt when the error is disabled, or reset when the error is detected.

Parameters:

mode – Monitor mode to set.

status_t CLOCK_SetFLASHAccessCyclesForFreq(uint32_t system_freq_hz, run_mode_t mode)

Set the additional number of wait-states added to account for the ratio of system clock period to flash access time during full speed power mode.

Parameters:

system_freq_hz – : Input frequency
mode – : Active run mode (voltage level).

Returns:

success or fail status

void CLOCK_SetPll1MonitorMode(scg_pll1_monitor_mode_t mode)

Sets the PLL1 monitor mode.

This function sets the PLL1 monitor mode. The mode can be disabled, it can generate an interrupt when the error is disabled, or reset when the error is detected.

Parameters:

mode – Monitor mode to set.

uint32_t CLOCK_GetPLL1InClockRate(void)

Return PLL1 input clock rate.

Returns:: PLL1 input clock rate

__STATIC_INLINE bool CLOCK_IsPLL1Locked (void)

Check if PLL1 is locked or not.

Returns:: true if the PLL1 is locked, false if not locked

uint32_t CLOCK_GetPLLOutFromSetup(pll_setup_t *pSetup)

Return PLL0 output clock rate from setup structure.

Parameters:

pSetup – : Pointer to a PLL setup structure

Returns:

System PLL output clock rate the setup structure will generate

pll_error_t CLOCK_SetupPLLData(pll_config_t *pControl, pll_setup_t *pSetup)

Set PLL output based on the passed PLL setup data.

Note

Actual frequency for setup may vary from the desired frequency based on the accuracy of input clocks, rounding, non-fractional PLL mode, etc.

Parameters:

pControl – : Pointer to populated PLL control structure to generate setup with
pSetup – : Pointer to PLL setup structure to be filled

Returns:

PLL_ERROR_SUCCESS on success, or PLL setup error code

pll_error_t CLOCK_SetPLL1Freq(const pll_setup_t *pSetup)

Set PLL output from PLL setup structure (precise frequency)

Note

This function will power off the PLL, setup the PLL with the new setup data, and then optionally powerup the PLL, wait for PLL lock, and adjust system voltages to the new PLL rate. The function will not alter any source clocks (ie, main systen clock) that may use the PLL, so these should be setup prior to and after exiting the function.

Parameters:

pSetup – : Pointer to populated PLL setup structure

Returns:

kStatus_PLL_Success on success, or PLL setup error code

FSL_CLOCK_DRIVER_VERSION: CLOCK driver version 2.0.0.

FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL

Configure whether driver controls clock.

When set to 0, peripheral drivers will enable clock in initialize function and disable clock in de-initialize function. When set to 1, peripheral driver will not control the clock, application could control the clock out of the driver.

Note

All drivers share this feature switcher. If it is set to 1, application should handle clock enable and disable for all drivers.

SDK_DEVICE_MAXIMUM_CPU_CLOCK_FREQUENCY

CLK_GATE_REG_OFFSET(value): Clock gate name used for CLOCK_EnableClock/CLOCK_DisableClock.

CLK_GATE_BIT_SHIFT(value)

kCLOCK_Crc0

kCLOCK_Ewm0

kCLOCK_InputMux

kCLOCK_Smartdma

AOI_CLOCKS: Clock ip name array for AOI.

CRC_CLOCKS: Clock ip name array for CRC.

CTIMER_CLOCKS: Clock ip name array for CTIMER.

DMA_CLOCKS: Clock ip name array for DMA.

EDMA_CLOCKS: Clock gate name array for EDMA.

ERM_CLOCKS: Clock ip name array for ERM.

EIM_CLOCKS: Clock ip name array for EIM.

ESPI_CLOCKS: Clock gate name array for ESPI.

ETH_CLOCKS: Clock gate name array for ENET.

E1588_CLOCKS: Clock gate name array for E1588.

FLEXCAN_CLOCKS: Clock ip name array for FLEXCAN.

FREQME_CLOCKS: Clock ip name array for FREQME.

FLEXIO_CLOCKS: Clock ip name array for FLEXIO.

FLEXSPI_CLOCKS: Clock ip name array for FLEXSPI.

GPIO_CLOCKS: Clock ip name array for GPIO.

GDET_CLOCKS: Clock ip name array for GDET.

INPUTMUX_CLOCKS: Clock ip name array for INPUTMUX.

LPCMP_CLOCKS: Clock ip name array for GPIO.

LPADC_CLOCKS: Clock ip name array for LPADC.

LPDAC_CLOCKS: Clock ip name array for LPDAC.

LPUART_CLOCKS: Clock ip name array for LPUART.

LPI2C_CLOCKS: Clock ip name array for LPI2C.

LPSPI_CLOCKS: Clock ip name array for LSPI.

I3C_CLOCKS: Clock ip name array for I3C.

OSTIMER_CLOCKS: Clock ip name array for OSTIMER.

PORT_CLOCKS: Clock ip name array for PORT.

RMII_CLOCKS: Clock gate name array for RMII.

SPIFILTER_CLOCKS: Clock ip name array for SPIFILTER.

SMARTDMA_CLOCKS: Clock ip name array for SMARTDMA.

TRNG_CLOCKS: Clock ip name array for TRNG.

UTICK_CLOCKS: Clock ip name array for UTICK.

USB_CLOCKS: Clock ip name array for USBHS.

USBPHY_CLOCKS: Clock ip name array for USBHSPHY.

VREF_CLOCKS: Clock ip name array for VREF.

RTC_CLOCKS: Clock gate name array for RTC.

TSI_CLOCKS: Clock gate name array for TSI.

TENBASET_PHY_CLOCKS: Clock gate name array for TENBASET_PHY.

WWDT_CLOCKS: Clock ip name array for WWDT.

BUS_CLK: Peripherals clock source definition.

CLK_ATTACH_REG_OFFSET(value)

Clock Mux Switches The encoding is as follows each connection identified is 32bits wide while 24bits are valuable starting from LSB upwards.

[4 bits for choice, 0 means invalid choice] [8 bits mux ID]*

CLK_ATTACH_CLK_SEL(value)

CLK_ATTACH_MUX(reg, sel)

kCLOCK_DivMax

PLL_CONFIGFLAG_FORCENOFRACT

PLL configuration structure flags for ‘flags’ field These flags control how the PLL configuration function sets up the PLL setup structure.

When the PLL_CONFIGFLAG_FORCENOFRACT flag is selected, the PLL hardware for the automatic bandwidth selection, Spread Spectrum (SS) support, and fractional M-divider are not used.

Force non-fractional output mode, PLL output will not use the fractional, automatic bandwidth, or SS hardware

sirc_trim_mode_t trimMode: Trim mode.

sirc_trim_src_t trimSrc: Trim source.

uint16_t trimDiv: Divider of SOSC.

uint8_t cltrim: Trim coarse value; Irrelevant if trimMode is kSCG_TrimUpdate.

uint8_t ccotrim: Trim fine value; Irrelevant if trimMode is kSCG_TrimUpdate.

bool enableInternalCapBank: enable/disable the internal capacitance bank.

bool enableCrystalOscillatorBypass: enable/disable the crystal oscillator bypass.

vbat_osc_xtal_cap_t xtalCap: The internal capacitance for the OSC XTAL pin from the capacitor bank, only useful when the internal capacitance bank is enabled.

vbat_osc_extal_cap_t extalCap: The internal capacitance for the OSC EXTAL pin from the capacitor bank, only useful when the internal capacitance bank is enabled.

vbat_osc_coarse_adjustment_value_t coarseAdjustment: 32kHz crystal oscillator amplifier coarse adjustment value.

vbat_osc_init_trim_t initTrim

vbat_osc_cap_trim_t capTrim

vbat_osc_dly_trim_t dlyTrim

vbat_osc_cap2_trim_t cap2Trim

vbat_osc_cmp_trim_t cmpTrim

vbat_osc_mode_en_t mode

vbat_osc_xtal_cap_t xtalCap

vbat_osc_extal_cap_t extalCap

vbat_osc_coarse_adjustment_value_t ampGain

osc32k_clk_gate_id_t id

uint32_t desiredRate: Desired PLL rate in Hz

uint32_t inputSource: PLL input source

uint32_t flags: PLL configuration flags, Or’ed value of PLL_CONFIGFLAG_* definitions

ss_progmodfm_t ss_mf: SS Programmable modulation frequency, only applicable when not using PLL_CONFIGFLAG_FORCENOFRACT flag

ss_progmoddp_t ss_mr: SS Programmable frequency modulation depth, only applicable when not using PLL_CONFIGFLAG_FORCENOFRACT flag

ss_modwvctrl_t ss_mc: SS Modulation waveform control, only applicable when not using PLL_CONFIGFLAG_FORCENOFRACT flag

bool mfDither: false for fixed modulation frequency or true for dithering, only applicable when not using PLL_CONFIGFLAG_FORCENOFRACT flag

uint32_t pllctrl: PLL Control register APLLCTRL

uint32_t pllndiv: PLL N Divider register APLLNDIV

uint32_t pllpdiv: PLL P Divider register APLLPDIV

uint32_t pllmdiv: PLL M Divider register APLLMDIV

uint32_t pllsscg[2]: PLL Spread Spectrum Control registers APLLSSCG

uint32_t pllRate: Actual PLL rate

struct _sirc_trim_config: #include <fsl_clock.h>

sirc trim configuration.

struct _vbat_osc_config: #include <fsl_clock.h>

The structure of oscillator configuration.

struct _osc_32k_config: #include <fsl_clock.h>

The structure of oscillator configuration.

struct _pll_config

#include <fsl_clock.h>

PLL configuration structure.

This structure can be used to configure the settings for a PLL setup structure. Fill in the desired configuration for the PLL and call the PLL setup function to fill in a PLL setup structure.

struct _pll_setup: #include <fsl_clock.h>

PLL0 setup structure This structure can be used to pre-build a PLL setup configuration at run-time and quickly set the PLL to the configuration. It can be populated with the PLL setup function. If powering up or waiting for PLL lock, the PLL input clock source should be configured prior to PLL setup.

CRC: Cyclic Redundancy Check Driver#

FSL_CRC_DRIVER_VERSION

CRC driver version. Version 2.1.0.

Current version: 2.1.0

Change log:

Version 2.1.0
- Choosing CRC clocks from CRC clock array according to instance instead of hardcoded value.
Version 2.0.5
- Fix CERT-C issue with boolean-to-unsigned integer conversion.
Version 2.0.4
- Release peripheral from reset if necessary in init function.
Version 2.0.3
- Fix MISRA issues
Version 2.0.2
- Fix MISRA issues
Version 2.0.1
- move DATA and DATALL macro definition from header file to source file

enum _crc_bits

CRC bit width.

Values:

enumerator kCrcBits16: Generate 16-bit CRC code

enumerator kCrcBits32: Generate 32-bit CRC code

enum _crc_result

CRC result type.

Values:

enumerator kCrcFinalChecksum: CRC data register read value is the final checksum. Reflect out and final xor protocol features are applied.

enumerator kCrcIntermediateChecksum: CRC data register read value is intermediate checksum (raw value). Reflect out and final xor protocol feature are not applied. Intermediate checksum can be used as a seed for CRC_Init() to continue adding data to this checksum.

typedef enum _crc_bits crc_bits_t: CRC bit width.

typedef enum _crc_result crc_result_t: CRC result type.

typedef struct _crc_config crc_config_t

CRC protocol configuration.

This structure holds the configuration for the CRC protocol.

void CRC_Init(CRC_Type *base, const crc_config_t *config)

Enables and configures the CRC peripheral module.

This function enables the clock gate in the SIM module for the CRC peripheral. It also configures the CRC module and starts a checksum computation by writing the seed.

Parameters:

base – CRC peripheral address.
config – CRC module configuration structure.

void CRC_Deinit(CRC_Type *base)

Disables the CRC peripheral module.

This function disables the clock gate in the SIM module for the CRC peripheral.

Parameters:

base – CRC peripheral address.

void CRC_GetDefaultConfig(crc_config_t *config)

Loads default values to the CRC protocol configuration structure.

Loads default values to the CRC protocol configuration structure. The default values are as follows.

config->polynomial = 0x1021;
config->seed = 0xFFFF;
config->reflectIn = false;
config->reflectOut = false;
config->complementChecksum = false;
config->crcBits = kCrcBits16;
config->crcResult = kCrcFinalChecksum;

Parameters:

config – CRC protocol configuration structure.

void CRC_WriteData(CRC_Type *base, const uint8_t *data, size_t dataSize)

Writes data to the CRC module.

Writes input data buffer bytes to the CRC data register. The configured type of transpose is applied.

Parameters:

base – CRC peripheral address.
data – Input data stream, MSByte in data[0].
dataSize – Size in bytes of the input data buffer.

uint32_t CRC_Get32bitResult(CRC_Type *base)

Reads the 32-bit checksum from the CRC module.

Reads the CRC data register (either an intermediate or the final checksum). The configured type of transpose and complement is applied.

Parameters:

base – CRC peripheral address.

Returns:

An intermediate or the final 32-bit checksum, after configured transpose and complement operations.

uint16_t CRC_Get16bitResult(CRC_Type *base)

Reads a 16-bit checksum from the CRC module.

Reads the CRC data register (either an intermediate or the final checksum). The configured type of transpose and complement is applied.

Parameters:

base – CRC peripheral address.

Returns:

An intermediate or the final 16-bit checksum, after configured transpose and complement operations.

CRC_DRIVER_USE_CRC16_CCIT_FALSE_AS_DEFAULT: Default configuration structure filled by CRC_GetDefaultConfig(). Use CRC16-CCIT-FALSE as defeault.

struct _crc_config

#include <fsl_crc.h>

CRC protocol configuration.

This structure holds the configuration for the CRC protocol.

Public Members

uint32_t polynomial: CRC Polynomial, MSBit first. Example polynomial: 0x1021 = 1_0000_0010_0001 = x^12+x^5+1

uint32_t seed: Starting checksum value

bool reflectIn: Reflect bits on input.

bool reflectOut: Reflect bits on output.

bool complementChecksum: True if the result shall be complement of the actual checksum.

crc_bits_t crcBits: Selects 16- or 32- bit CRC protocol.

crc_result_t crcResult: Selects final or intermediate checksum return from CRC_Get16bitResult() or CRC_Get32bitResult()

CTIMER: Standard counter/timers#

void CTIMER_Init(CTIMER_Type *base, const ctimer_config_t *config)

Ungates the clock and configures the peripheral for basic operation.

Note

This API should be called at the beginning of the application before using the driver.

Parameters:

base – Ctimer peripheral base address
config – Pointer to the user configuration structure.

void CTIMER_Deinit(CTIMER_Type *base)

Gates the timer clock.

Parameters:

base – Ctimer peripheral base address

void CTIMER_GetDefaultConfig(ctimer_config_t *config)

Fills in the timers configuration structure with the default settings.

The default values are:

config->mode = kCTIMER_TimerMode;
config->input = kCTIMER_Capture_0;
config->prescale = 0;

Parameters:

config – Pointer to the user configuration structure.

status_t CTIMER_SetupPwmPeriod(CTIMER_Type *base, const ctimer_match_t pwmPeriodChannel, ctimer_match_t matchChannel, uint32_t pwmPeriod, uint32_t pulsePeriod, bool enableInt)

Configures the PWM signal parameters.

Enables PWM mode on the match channel passed in and will then setup the match value and other match parameters to generate a PWM signal. This function can manually assign the specified channel to set the PWM cycle.

Note

When setting PWM output from multiple output pins, all should use the same PWM period

Parameters:

base – Ctimer peripheral base address
pwmPeriodChannel – Specify the channel to control the PWM period
matchChannel – Match pin to be used to output the PWM signal
pwmPeriod – PWM period match value
pulsePeriod – Pulse width match value
enableInt – Enable interrupt when the timer value reaches the match value of the PWM pulse, if it is 0 then no interrupt will be generated.

Returns:

kStatus_Success on success kStatus_Fail If matchChannel is equal to pwmPeriodChannel; this channel is reserved to set the PWM cycle If PWM pulse width register value is larger than 0xFFFFFFFF.

status_t CTIMER_SetupPwm(CTIMER_Type *base, const ctimer_match_t pwmPeriodChannel, ctimer_match_t matchChannel, uint8_t dutyCyclePercent, uint32_t pwmFreq_Hz, uint32_t srcClock_Hz, bool enableInt)

Configures the PWM signal parameters.

Note

When setting PWM output from multiple output pins, all should use the same PWM frequency. Please use CTIMER_SetupPwmPeriod to set up the PWM with high resolution.

Parameters:

base – Ctimer peripheral base address
pwmPeriodChannel – Specify the channel to control the PWM period
matchChannel – Match pin to be used to output the PWM signal
dutyCyclePercent – PWM pulse width; the value should be between 0 to 100
pwmFreq_Hz – PWM signal frequency in Hz
srcClock_Hz – Timer counter clock in Hz
enableInt – Enable interrupt when the timer value reaches the match value of the PWM pulse, if it is 0 then no interrupt will be generated.

static inline void CTIMER_UpdatePwmPulsePeriod(CTIMER_Type *base, ctimer_match_t matchChannel, uint32_t pulsePeriod)

Updates the pulse period of an active PWM signal.

Parameters:

base – Ctimer peripheral base address
matchChannel – Match pin to be used to output the PWM signal
pulsePeriod – New PWM pulse width match value

status_t CTIMER_UpdatePwmDutycycle(CTIMER_Type *base, const ctimer_match_t pwmPeriodChannel, ctimer_match_t matchChannel, uint8_t dutyCyclePercent)

Updates the duty cycle of an active PWM signal.

Note

Please use CTIMER_SetupPwmPeriod to update the PWM with high resolution. This function can manually assign the specified channel to set the PWM cycle.

Parameters:

base – Ctimer peripheral base address
pwmPeriodChannel – Specify the channel to control the PWM period
matchChannel – Match pin to be used to output the PWM signal
dutyCyclePercent – New PWM pulse width; the value should be between 0 to 100

Returns:

kStatus_Success on success kStatus_Fail If PWM pulse width register value is larger than 0xFFFFFFFF.

static inline void CTIMER_EnableInterrupts(CTIMER_Type *base, uint32_t mask)

Enables the selected Timer interrupts.

Parameters:

base – Ctimer peripheral base address
mask – The interrupts to enable. This is a logical OR of members of the enumeration ctimer_interrupt_enable_t

static inline void CTIMER_DisableInterrupts(CTIMER_Type *base, uint32_t mask)

Disables the selected Timer interrupts.

Parameters:

base – Ctimer peripheral base address
mask – The interrupts to enable. This is a logical OR of members of the enumeration ctimer_interrupt_enable_t

static inline uint32_t CTIMER_GetEnabledInterrupts(CTIMER_Type *base)

Gets the enabled Timer interrupts.

Parameters:

base – Ctimer peripheral base address

Returns:

The enabled interrupts. This is the logical OR of members of the enumeration ctimer_interrupt_enable_t

static inline uint32_t CTIMER_GetStatusFlags(CTIMER_Type *base)

Gets the Timer status flags.

Parameters:

base – Ctimer peripheral base address

Returns:

The status flags. This is the logical OR of members of the enumeration ctimer_status_flags_t

static inline void CTIMER_ClearStatusFlags(CTIMER_Type *base, uint32_t mask)

Clears the Timer status flags.

Parameters:

base – Ctimer peripheral base address
mask – The status flags to clear. This is a logical OR of members of the enumeration ctimer_status_flags_t

static inline void CTIMER_StartTimer(CTIMER_Type *base)

Starts the Timer counter.

Parameters:

base – Ctimer peripheral base address

static inline void CTIMER_StopTimer(CTIMER_Type *base)

Stops the Timer counter.

Parameters:

base – Ctimer peripheral base address

FSL_CTIMER_DRIVER_VERSION: Version 2.3.4

enum _ctimer_capture_channel

List of Timer capture channels.

Values:

enumerator kCTIMER_Capture_0: Timer capture channel 0

enumerator kCTIMER_Capture_1: Timer capture channel 1

enumerator kCTIMER_Capture_3: Timer capture channel 3

enum _ctimer_capture_edge

List of capture edge options.

Values:

enumerator kCTIMER_Capture_RiseEdge: Capture on rising edge

enumerator kCTIMER_Capture_FallEdge: Capture on falling edge

enumerator kCTIMER_Capture_BothEdge: Capture on rising and falling edge

enum _ctimer_match

List of Timer match registers.

Values:

enumerator kCTIMER_Match_0: Timer match register 0

enumerator kCTIMER_Match_1: Timer match register 1

enumerator kCTIMER_Match_2: Timer match register 2

enumerator kCTIMER_Match_3: Timer match register 3

enum _ctimer_external_match

List of external match.

Values:

enumerator kCTIMER_External_Match_0: External match 0

enumerator kCTIMER_External_Match_1: External match 1

enumerator kCTIMER_External_Match_2: External match 2

enumerator kCTIMER_External_Match_3: External match 3

enum _ctimer_match_output_control

List of output control options.

Values:

enumerator kCTIMER_Output_NoAction: No action is taken

enumerator kCTIMER_Output_Clear: Clear the EM bit/output to 0

enumerator kCTIMER_Output_Set: Set the EM bit/output to 1

enumerator kCTIMER_Output_Toggle: Toggle the EM bit/output

enum _ctimer_timer_mode

List of Timer modes.

Values:

enumerator kCTIMER_TimerMode

enumerator kCTIMER_IncreaseOnRiseEdge

enumerator kCTIMER_IncreaseOnFallEdge

enumerator kCTIMER_IncreaseOnBothEdge

enum _ctimer_interrupt_enable

List of Timer interrupts.

Values:

enumerator kCTIMER_Match0InterruptEnable: Match 0 interrupt

enumerator kCTIMER_Match1InterruptEnable: Match 1 interrupt

enumerator kCTIMER_Match2InterruptEnable: Match 2 interrupt

enumerator kCTIMER_Match3InterruptEnable: Match 3 interrupt

enum _ctimer_status_flags

List of Timer flags.

Values:

enumerator kCTIMER_Match0Flag: Match 0 interrupt flag

enumerator kCTIMER_Match1Flag: Match 1 interrupt flag

enumerator kCTIMER_Match2Flag: Match 2 interrupt flag

enumerator kCTIMER_Match3Flag: Match 3 interrupt flag

enum ctimer_callback_type_t

Callback type when registering for a callback. When registering a callback an array of function pointers is passed the size could be 1 or 8, the callback type will tell that.

Values:

enumerator kCTIMER_SingleCallback: Single Callback type where there is only one callback for the timer. based on the status flags different channels needs to be handled differently

enumerator kCTIMER_MultipleCallback: Multiple Callback type where there can be 8 valid callbacks, one per channel. for both match/capture

typedef enum _ctimer_capture_channel ctimer_capture_channel_t: List of Timer capture channels.

typedef enum _ctimer_capture_edge ctimer_capture_edge_t: List of capture edge options.

typedef enum _ctimer_match ctimer_match_t: List of Timer match registers.

typedef enum _ctimer_external_match ctimer_external_match_t: List of external match.

typedef enum _ctimer_match_output_control ctimer_match_output_control_t: List of output control options.

typedef enum _ctimer_timer_mode ctimer_timer_mode_t: List of Timer modes.

typedef enum _ctimer_interrupt_enable ctimer_interrupt_enable_t: List of Timer interrupts.

typedef enum _ctimer_status_flags ctimer_status_flags_t: List of Timer flags.

typedef void (*ctimer_callback_t)(uint32_t flags)

typedef struct _ctimer_match_config ctimer_match_config_t

Match configuration.

This structure holds the configuration settings for each match register.

typedef struct _ctimer_config ctimer_config_t

Timer configuration structure.

This structure holds the configuration settings for the Timer peripheral. To initialize this structure to reasonable defaults, call the CTIMER_GetDefaultConfig() function and pass a pointer to the configuration structure instance.

The configuration structure can be made constant so as to reside in flash.

void CTIMER_SetupMatch(CTIMER_Type *base, ctimer_match_t matchChannel, const ctimer_match_config_t *config)

Setup the match register.

User configuration is used to setup the match value and action to be taken when a match occurs.

Parameters:

base – Ctimer peripheral base address
matchChannel – Match register to configure
config – Pointer to the match configuration structure

uint32_t CTIMER_GetOutputMatchStatus(CTIMER_Type *base, uint32_t matchChannel)

Get the status of output match.

This function gets the status of output MAT, whether or not this output is connected to a pin. This status is driven to the MAT pins if the match function is selected via IOCON. 0 = LOW. 1 = HIGH.

Parameters:

base – Ctimer peripheral base address
matchChannel – External match channel, user can obtain the status of multiple match channels at the same time by using the logic of “|” enumeration ctimer_external_match_t

Returns:

The mask of external match channel status flags. Users need to use the _ctimer_external_match type to decode the return variables.

void CTIMER_SetupCapture(CTIMER_Type *base, ctimer_capture_channel_t capture, ctimer_capture_edge_t edge, bool enableInt)

Setup the capture.

Parameters:

base – Ctimer peripheral base address
capture – Capture channel to configure
edge – Edge on the channel that will trigger a capture
enableInt – Flag to enable channel interrupts, if enabled then the registered call back is called upon capture

static inline uint32_t CTIMER_GetTimerCountValue(CTIMER_Type *base)

Get the timer count value from TC register.

Parameters:

base – Ctimer peripheral base address.

Returns:

return the timer count value.

void CTIMER_RegisterCallBack(CTIMER_Type *base, ctimer_callback_t *cb_func, ctimer_callback_type_t cb_type)

This function configures CTimer Callback in following modes:

Single Callback: cb_func should be pointer to callback function pointer For example: ctimer_callback_t ctimer_callback = pwm_match_callback; CTIMER_RegisterCallBack(CTIMER, &ctimer_callback, kCTIMER_SingleCallback);
Multiple Callback: cb_func should be pointer to array of callback function pointers Each element corresponds to Interrupt Flag in IR register. For example: ctimer_callback_t ctimer_callback_table[] = { ctimer_match0_callback, NULL, NULL, ctimer_match3_callback, NULL, NULL, NULL, NULL}; CTIMER_RegisterCallBack(CTIMER, &ctimer_callback_table[0], kCTIMER_MultipleCallback);

Parameters:

base – Ctimer peripheral base address
cb_func – Pointer to callback function pointer
cb_type – callback function type, singular or multiple

static inline void CTIMER_Reset(CTIMER_Type *base)

Reset the counter.

The timer counter and prescale counter are reset on the next positive edge of the APB clock.

Parameters:

base – Ctimer peripheral base address

static inline void CTIMER_SetPrescale(CTIMER_Type *base, uint32_t prescale)

Setup the timer prescale value.

Specifies the maximum value for the Prescale Counter.

Parameters:

base – Ctimer peripheral base address
prescale – Prescale value

static inline uint32_t CTIMER_GetCaptureValue(CTIMER_Type *base, ctimer_capture_channel_t capture)

Get capture channel value.

Get the counter/timer value on the corresponding capture channel.

Parameters:

base – Ctimer peripheral base address
capture – Select capture channel

Returns:

The timer count capture value.

static inline void CTIMER_EnableResetMatchChannel(CTIMER_Type *base, ctimer_match_t match, bool enable)

Enable reset match channel.

Set the specified match channel reset operation.

Parameters:

base – Ctimer peripheral base address
match – match channel used
enable – Enable match channel reset operation.

static inline void CTIMER_EnableStopMatchChannel(CTIMER_Type *base, ctimer_match_t match, bool enable)

Enable stop match channel.

Set the specified match channel stop operation.

Parameters:

base – Ctimer peripheral base address.
match – match channel used.
enable – Enable match channel stop operation.

static inline void CTIMER_EnableMatchChannelReload(CTIMER_Type *base, ctimer_match_t match, bool enable)

Enable reload channel falling edge.

Enable the specified match channel reload match shadow value.

Parameters:

base – Ctimer peripheral base address.
match – match channel used.
enable – Enable .

static inline void CTIMER_EnableRisingEdgeCapture(CTIMER_Type *base, ctimer_capture_channel_t capture, bool enable)

Enable capture channel rising edge.

Sets the specified capture channel for rising edge capture.

Parameters:

base – Ctimer peripheral base address.
capture – capture channel used.
enable – Enable rising edge capture.

static inline void CTIMER_EnableFallingEdgeCapture(CTIMER_Type *base, ctimer_capture_channel_t capture, bool enable)

Enable capture channel falling edge.

Sets the specified capture channel for falling edge capture.

Parameters:

base – Ctimer peripheral base address.
capture – capture channel used.
enable – Enable falling edge capture.

static inline void CTIMER_SetShadowValue(CTIMER_Type *base, ctimer_match_t match, uint32_t matchvalue)

Set the specified match shadow channel.

Parameters:

base – Ctimer peripheral base address.
match – match channel used.
matchvalue – Reload the value of the corresponding match register.

struct _ctimer_match_config

#include <fsl_ctimer.h>

Match configuration.

This structure holds the configuration settings for each match register.

Public Members

uint32_t matchValue: This is stored in the match register

bool enableCounterReset: true: Match will reset the counter false: Match will not reser the counter

bool enableCounterStop: true: Match will stop the counter false: Match will not stop the counter

ctimer_match_output_control_t outControl: Action to be taken on a match on the EM bit/output

bool outPinInitState: Initial value of the EM bit/output

bool enableInterrupt: true: Generate interrupt upon match false: Do not generate interrupt on match

struct _ctimer_config

#include <fsl_ctimer.h>

Timer configuration structure.

The configuration structure can be made constant so as to reside in flash.

Public Members

ctimer_timer_mode_t mode: Timer mode

ctimer_capture_channel_t input: Input channel to increment the timer, used only in timer modes that rely on this input signal to increment TC

uint32_t prescale: Prescale value

DAC: Digital-to-Analog Converter Driver#

void DAC_Init(LPDAC_Type *base, const dac_config_t *config)

Initialize the DAC module with common configuartion.

The clock will be enabled in this function.

Parameters:

base – DAC peripheral base address.
config – Pointer to configuration structure.

void DAC_GetDefaultConfig(dac_config_t *config)

Get the default settings for initialization’s configuration.

This function initializes the user configuration structure to a default value. The default values are:

config->fifoWatermarkLevel = 0U;
config->fifoTriggerMode = kDAC_FIFOTriggerByHardwareMode;
config->fifoWorkMode = kDAC_FIFODisabled;
config->enableLowPowerMode = false;
config->referenceVoltageSource = kDAC_ReferenceVoltageSourceAlt1;

Parameters:

config – Pointer to configuration structure.

void DAC_Deinit(LPDAC_Type *base)

De-initialize the DAC module.

The clock will be disabled in this function.

Parameters:

base – DAC peripheral base address.

static inline void DAC_SetReset(LPDAC_Type *base, uint32_t mask)

Assert the reset control to part hardware.

This function is to assert the reset control to part hardware. Responding part hardware would remain reset untill cleared by software.

Parameters:

base – DAC peripheral base address.
mask – The reset control mask, see to _dac_reset_control_t.

static inline void DAC_ClearReset(LPDAC_Type *base, uint32_t mask)

Clear the reset control to part hardware.

This function is to clear the reset control to part hardware. Responding part hardware would work after the reset control is cleared by software.

Parameters:

base – DAC peripheral base address.
mask – The reset control mask, see to _dac_reset_control_t.

static inline void DAC_Enable(LPDAC_Type *base, bool enable)

Enable the DAC hardware system or not.

This function is to start the Programmable Reference Generator operation or not.

Parameters:

base – DAC peripheral base address.
enable – Assertion of indicated event.

static inline void DAC_EnableInterrupts(LPDAC_Type *base, uint32_t mask)

Enable the interrupts.

Parameters:

base – DAC peripheral base address.
mask – Mask value of indicated interrupt events. See to _dac_interrupt_enable.

static inline void DAC_DisableInterrupts(LPDAC_Type *base, uint32_t mask)

Disable the interrupts.

Parameters:

base – DAC peripheral base address.
mask – Mask value of indicated interrupt events. See to _dac_interrupt_enable.

static inline void DAC_EnableDMA(LPDAC_Type *base, uint32_t mask, bool enable)

Enable the DMA switchers or not.

Parameters:

base – DAC peripheral base address.
mask – Mask value of indicated DMA requeset. See to _dac_dma_enable.
enable – Enable the DMA or not.

static inline uint32_t DAC_GetStatusFlags(LPDAC_Type *base)

Get status flags of DAC module.

Parameters:

base – DAC peripheral base address.

Returns:

Mask value of status flags. See to _dac_status_flags.

static inline void DAC_ClearStatusFlags(LPDAC_Type *base, uint32_t flags)

Clear status flags of DAC module.

Parameters:

base – DAC peripheral base address.
flags – Mask value of status flags to be cleared. See to _dac_status_flags.

static inline void DAC_SetData(LPDAC_Type *base, uint32_t value)

Set data into the entry of FIFO buffer.

Parameters:

base – DAC peripheral base address.
value – Setting value into FIFO buffer.

static inline uint32_t DAC_GetFIFOWritePointer(LPDAC_Type *base)

Get the value of the FIFO write pointer.

Parameters:

base – DAC peripheral base address.

Returns:

Current value of the FIFO write pointer.

static inline uint32_t DAC_GetFIFOReadPointer(LPDAC_Type *base)

Get the value of the FIFO read pointer.

Parameters:

base – DAC peripheral base address.

Returns:

Current value of the FIFO read pointer.

static inline void DAC_DoSoftwareTriggerFIFO(LPDAC_Type *base)

Do software trigger to FIFO when in software mode.

Parameters:

base – DAC peripheral base address.

FSL_DAC_DRIVER_VERSION: DAC driver version 2.1.3.

DAC reset control.

Values:

enumerator kDAC_ResetFIFO: Resets the FIFO pointers and flags.

enumerator kDAC_ResetLogic: Resets all DAC registers and internal logic.

DAC interrupts.

Values:

enumerator kDAC_FIFOFullInterruptEnable: FIFO full interrupt enable.

enumerator kDAC_FIFOEmptyInterruptEnable: FIFO empty interrupt enable.

enumerator kDAC_FIFOWatermarkInterruptEnable: FIFO watermark interrupt enable.

enumerator kDAC_SwingBackInterruptEnable: Swing back one cycle complete interrupt enable.

enumerator kDAC_FIFOOverflowInterruptEnable: FIFO overflow interrupt enable.

enumerator kDAC_FIFOUnderflowInterruptEnable: FIFO underflow interrupt enable.

enumerator kDAC_PeriodTriggerCompleteInterruptEnable: Period trigger mode conversion complete interrupt enable

DAC DMA switchers.

Values:

enumerator kDAC_FIFOEmptyDMAEnable: FIFO empty DMA enable.

enumerator kDAC_FIFOWatermarkDMAEnable: FIFO watermark DMA enable.

DAC status flags.

Values:

enumerator kDAC_FIFOUnderflowFlag: This flag means that there is a new trigger after the buffer is empty. The FIFO read pointer will not increase in this case and the data sent to DAC analog conversion will not changed. This flag is cleared by writing a 1 to it.

enumerator kDAC_FIFOOverflowFlag: This flag indicates that data is intended to write into FIFO after the buffer is full. The writer pointer will not increase in this case. The extra data will not be written into the FIFO. This flag is cleared by writing a 1 to it.

enumerator kDAC_FIFOSwingBackFlag: This flag indicates that the DAC has completed one period of conversion in swing back mode. It means that the read pointer has increased to the top (write pointer) once and then decreased to zero once. For example, after three data is written to FIFO, the writer pointer is now 3. Then, if continually triggered, the read pointer will swing like: 0-1-2-1-0-1-2-, and so on. After the fourth trigger, the flag is set. This flag is cleared by writing a 1 to it.

enumerator kDAC_FIFOWatermarkFlag: This field is set if the remaining data in FIFO is less than or equal to the setting value of wartermark. By writing data into FIFO by DMA or CPU, this flag is cleared automatically when the data in FIFO is more than the setting value of watermark.

enumerator kDAC_FIFOEmptyFlag: FIFO empty flag.

enumerator kDAC_FIFOFullFlag: FIFO full flag.

enumerator kDAC_PeriodTriggerCompleteFlag: Period trigger mode conversion complete flag.

enum _dac_fifo_trigger_mode

DAC FIFO trigger mode.

Values:

enumerator kDAC_FIFOTriggerByHardwareMode: Buffer would be triggered by hardware.

enumerator kDAC_FIFOTriggerBySoftwareMode: Buffer would be triggered by software.

enum _dac_fifo_work_mode

DAC FIFO work mode.

Values:

enumerator kDAC_FIFODisabled: FIFO mode is disabled and buffer mode is enabled. Any data written to DATA[DATA] goes to buffer then goes to conversion.

enumerator kDAC_FIFOWorkAsNormalMode: FIFO mode is enabled. Data will be first read from FIFO to buffer then goes to conversion.

enumerator kDAC_FIFOWorkAsSwingMode: In swing mode, the read pointer swings between the writer pointer and zero. That is, the trigger increases the read pointer till reach the writer pointer and decreases the read pointer till zero, and so on. The FIFO empty/full/watermark flag will not update during swing back mode.

enumerator kDAC_FIFOWorkAsPeriodTriggerMode: In periodic trigger mode, user only needs to send the first trigger. Then after every [PTG_PERIOD+1] RCLK cycles, DAC will be automatically triggered by internal trigger. There will be [PTG_NUM] internal triggers, thus in total [PTG_NUM+1] conversions including the first trigger sent by user. User can terminate the current conversion queue by clearing the GCR[PTGEN] bit. Then, after the current conversion is completed, the conversion is terminated and the PTGCOCO flag is set. If PCR[PTG_NUM] is set to zero, there will be infinite triggers following the first hardware/software trigger, until the GCR[PTGEN] is cleared by software. In any case, the conversion can be terminated by FIFORST/SWRST.

enumerator kDAC_FIFOWorkAsPeriodTriggerAndSwingMode: Periodically trigger DAC and swing back.

enum _dac_reference_voltage_source

DAC reference voltage source.

Values:

enumerator kDAC_ReferenceVoltageSourceAlt1: The DAC selects VREFH_INT as the reference voltage.

enumerator kDAC_ReferenceVoltageSourceAlt2: The DAC selects VREFH_EXT as the reference voltage.

enum _dac_reference_current_source

Values:

enumerator kDAC_ReferenceCurrentSourcePtat

enumerator kDAC_ReferenceCurrentSourceZtc

typedef enum _dac_fifo_trigger_mode dac_fifo_trigger_mode_t: DAC FIFO trigger mode.

typedef enum _dac_fifo_work_mode dac_fifo_work_mode_t: DAC FIFO work mode.

typedef enum _dac_reference_voltage_source dac_reference_voltage_source_t: DAC reference voltage source.

typedef enum _dac_reference_current_source dac_reference_current_source_t

typedef struct _dac_config dac_config_t: DAC configuration structure.

struct _dac_config

#include <fsl_dac.h>

DAC configuration structure.

Public Members

uint32_t fifoWatermarkLevel: FIFO’s watermark, the max value can be the hardware FIFO size.

dac_fifo_trigger_mode_t fifoTriggerMode: Select the trigger mode for FIFO.

dac_fifo_work_mode_t fifoWorkMode: Select the work mode for FIFO.

bool enableOpampBuffer: Opamp is used as buffer.

bool enableLowerLowPowerMode: Enable the lower low power mode.

uint32_t periodicTriggerNumber: There will be ‘periodicTriggerNumber’ internal triggers following the first hardware/software trigger. So there will be ‘periodicTriggerNumber + 1’ conversions in total. If set to zero, there will be infinite triggers following the first hw/sw trigger, until the GCR[PTGEN] is cleared.

uint32_t periodicTriggerWidth: Control the periodic trigger frequency. There will be ‘periodicTriggerWidth + 1’ RCLK cycles between each periodic trigger. The periodic trigger frequency should be configured to not larger than the analog conversion speed.

uint32_t syncTime: RCLK cycles before data latch. accessible range is 0-15. It is used to configure the DAC sync cycles which is helpful to reduce glitch on the output. The sync time is (LATCH_CYC+1) RCLK cycles. User should configure this register according to the RCLK frequency. The recommended sync time is at least 40ns.

dac_reference_current_source_t referenceCurrentSource: Select the internal reference current source.

dac_reference_voltage_source_t referenceVoltageSource: Select the reference voltage source.

eDMA: Enhanced Direct Memory Access (eDMA) Controller Driver#

void EDMA_Init(EDMA_Type *base, const edma_config_t *config)

Initializes the eDMA peripheral.

This function ungates the eDMA clock and configures the eDMA peripheral according to the configuration structure. All emda enabled request will be cleared in this function.

Note

This function enables the minor loop map feature.

Parameters:

base – eDMA peripheral base address.
config – A pointer to the configuration structure, see “edma_config_t”.

void EDMA_Deinit(EDMA_Type *base)

Deinitializes the eDMA peripheral.

This function gates the eDMA clock.

Parameters:

base – eDMA peripheral base address.

void EDMA_InstallTCD(EDMA_Type *base, uint32_t channel, edma_tcd_t *tcd)

Push content of TCD structure into hardware TCD register.

Parameters:

base – EDMA peripheral base address.
channel – EDMA channel number.
tcd – Point to TCD structure.

void EDMA_GetDefaultConfig(edma_config_t *config)

Gets the eDMA default configuration structure.

This function sets the configuration structure to default values. The default configuration is set to the following values.

config.enableContinuousLinkMode = false;
config.enableHaltOnError = true;
config.enableRoundRobinArbitration = false;
config.enableDebugMode = false;

Parameters:

config – A pointer to the eDMA configuration structure.

void EDMA_InitChannel(EDMA_Type *base, uint32_t channel, edma_channel_config_t *channelConfig)

EDMA Channel initialization.

Parameters:

base – eDMA4 peripheral base address.
channel – eDMA4 channel number.
channelConfig – pointer to user’s eDMA4 channel config structure, see edma_channel_config_t for detail.

static inline void EDMA_SetChannelMemoryAttribute(EDMA_Type *base, uint32_t channel, edma_channel_memory_attribute_t writeAttribute, edma_channel_memory_attribute_t readAttribute)

Set channel memory attribute.

Parameters:

base – eDMA4 peripheral base address.
channel – eDMA4 channel number.
writeAttribute – Attributes associated with a write transaction.
readAttribute – Attributes associated with a read transaction.

static inline void EDMA_SetChannelSignExtension(EDMA_Type *base, uint32_t channel, uint8_t position)

Set channel sign extension.

Parameters:

base – eDMA4 peripheral base address.
channel – eDMA4 channel number.
position – A non-zero value specifing the sign extend bit position. If 0, sign extension is disabled.

static inline void EDMA_SetChannelSwapSize(EDMA_Type *base, uint32_t channel, edma_channel_swap_size_t swapSize)

Set channel swap size.

Parameters:

base – eDMA4 peripheral base address.
channel – eDMA4 channel number.
swapSize – Swap occurs with respect to the specified transfer size. If 0, swap is disabled.

static inline void EDMA_SetChannelAccessType(EDMA_Type *base, uint32_t channel, edma_channel_access_type_t channelAccessType)

Set channel access type.

Parameters:

base – eDMA4 peripheral base address.
channel – eDMA4 channel number.
channelAccessType – eDMA4’s transactions type on the system bus when the channel is active.

static inline void EDMA_SetChannelMux(EDMA_Type *base, uint32_t channel, uint32_t channelRequestSource)

Set channel request source.

Parameters:

base – eDMA peripheral base address.
channel – eDMA channel number.
channelRequestSource – eDMA hardware service request source for the channel. User need to use the dma_request_source_t type as the input parameter. Note that devices may use other enum type to express dma request source and User can fined it in SOC header or fsl_edma_soc.h.

static inline uint32_t EDMA_GetChannelSystemBusInformation(EDMA_Type *base, uint32_t channel)

Gets the channel identification and attribute information on the system bus interface.

Parameters:

base – eDMA peripheral base address.
channel – eDMA channel number.

Returns:

The mask of the channel system bus information. Users need to use the _edma_channel_sys_bus_info type to decode the return variables.

static inline void EDMA_EnableChannelMasterIDReplication(EDMA_Type *base, uint32_t channel, bool enable)

Set channel master ID replication.

Parameters:

base – eDMA peripheral base address.
channel – eDMA channel number.
enable – true is enable, false is disable.

static inline void EDMA_SetChannelProtectionLevel(EDMA_Type *base, uint32_t channel, edma_channel_protection_level_t level)

Set channel security level.

Parameters:

base – eDMA peripheral base address.
channel – eDMA channel number.
level – security level.

void EDMA_ResetChannel(EDMA_Type *base, uint32_t channel)

Sets all TCD registers to default values.

This function sets TCD registers for this channel to default values.

Note

This function must not be called while the channel transfer is ongoing or it causes unpredictable results.

Note

This function enables the auto stop request feature.

Parameters:

base – eDMA peripheral base address.
channel – eDMA channel number.

void EDMA_SetTransferConfig(EDMA_Type *base, uint32_t channel, const edma_transfer_config_t *config, edma_tcd_t *nextTcd)

Configures the eDMA transfer attribute.

This function configures the transfer attribute, including source address, destination address, transfer size, address offset, and so on. It also configures the scatter gather feature if the user supplies the TCD address. Example:

edma_transfer_t config;
edma_tcd_t tcd;
config.srcAddr = ..;
config.destAddr = ..;
...
EDMA_SetTransferConfig(DMA0, channel, &config, &stcd);

Note

If nextTcd is not NULL, it means scatter gather feature is enabled and DREQ bit is cleared in the previous transfer configuration, which is set in the eDMA_ResetChannel.

Parameters:

base – eDMA peripheral base address.
channel – eDMA channel number.
config – Pointer to eDMA transfer configuration structure.
nextTcd – Point to TCD structure. It can be NULL if users do not want to enable scatter/gather feature.

void EDMA_SetMinorOffsetConfig(EDMA_Type *base, uint32_t channel, const edma_minor_offset_config_t *config)

Configures the eDMA minor offset feature.

The minor offset means that the signed-extended value is added to the source address or destination address after each minor loop.

Parameters:

base – eDMA peripheral base address.
channel – eDMA channel number.
config – A pointer to the minor offset configuration structure.

void EDMA_SetChannelPreemptionConfig(EDMA_Type *base, uint32_t channel, const edma_channel_Preemption_config_t *config)

Configures the eDMA channel preemption feature.

This function configures the channel preemption attribute and the priority of the channel.

Parameters:

base – eDMA peripheral base address.
channel – eDMA channel number
config – A pointer to the channel preemption configuration structure.

void EDMA_SetChannelLink(EDMA_Type *base, uint32_t channel, edma_channel_link_type_t type, uint32_t linkedChannel)

Sets the channel link for the eDMA transfer.

This function configures either the minor link or the major link mode. The minor link means that the channel link is triggered every time CITER decreases by 1. The major link means that the channel link is triggered when the CITER is exhausted.

Note

Users should ensure that DONE flag is cleared before calling this interface, or the configuration is invalid.

Parameters:

base – eDMA peripheral base address.
channel – eDMA channel number.
type – A channel link type, which can be one of the following:
- kEDMA_LinkNone
- kEDMA_MinorLink
- kEDMA_MajorLink
linkedChannel – The linked channel number.

void EDMA_SetBandWidth(EDMA_Type *base, uint32_t channel, edma_bandwidth_t bandWidth)

Sets the bandwidth for the eDMA transfer.

Because the eDMA processes the minor loop, it continuously generates read/write sequences until the minor count is exhausted. The bandwidth forces the eDMA to stall after the completion of each read/write access to control the bus request bandwidth seen by the crossbar switch.

Parameters:

base – eDMA peripheral base address.
channel – eDMA channel number.
bandWidth – A bandwidth setting, which can be one of the following:
- kEDMABandwidthStallNone
- kEDMABandwidthStall4Cycle
- kEDMABandwidthStall8Cycle

void EDMA_SetModulo(EDMA_Type *base, uint32_t channel, edma_modulo_t srcModulo, edma_modulo_t destModulo)

Sets the source modulo and the destination modulo for the eDMA transfer.

This function defines a specific address range specified to be the value after (SADDR + SOFF)/(DADDR + DOFF) calculation is performed or the original register value. It provides the ability to implement a circular data queue easily.

Parameters:

base – eDMA peripheral base address.
channel – eDMA channel number.
srcModulo – A source modulo value.
destModulo – A destination modulo value.

static inline void EDMA_EnableAutoStopRequest(EDMA_Type *base, uint32_t channel, bool enable)

Enables an auto stop request for the eDMA transfer.

If enabling the auto stop request, the eDMA hardware automatically disables the hardware channel request.

Parameters:

base – eDMA peripheral base address.
channel – eDMA channel number.
enable – The command to enable (true) or disable (false).

void EDMA_EnableChannelInterrupts(EDMA_Type *base, uint32_t channel, uint32_t mask)

Enables the interrupt source for the eDMA transfer.

Parameters:

base – eDMA peripheral base address.
channel – eDMA channel number.
mask – The mask of interrupt source to be set. Users need to use the defined edma_interrupt_enable_t type.

void EDMA_DisableChannelInterrupts(EDMA_Type *base, uint32_t channel, uint32_t mask)

Disables the interrupt source for the eDMA transfer.

Parameters:

base – eDMA peripheral base address.
channel – eDMA channel number.
mask – The mask of the interrupt source to be set. Use the defined edma_interrupt_enable_t type.

void EDMA_SetMajorOffsetConfig(EDMA_Type *base, uint32_t channel, int32_t sourceOffset, int32_t destOffset)

Configures the eDMA channel TCD major offset feature.

Adjustment value added to the source address at the completion of the major iteration count

Parameters:

base – eDMA peripheral base address.
channel – edma channel number.
sourceOffset – source address offset will be applied to source address after major loop done.
destOffset – destination address offset will be applied to source address after major loop done.

void EDMA_ConfigChannelSoftwareTCD(edma_tcd_t *tcd, const edma_transfer_config_t *transfer)

Sets TCD fields according to the user’s channel transfer configuration structure, edma_transfer_config_t.

@Note This API only supports EDMA4 TCD type. It can be used to support all types with extension API EDMA_ConfigChannelSoftwareTCDExt

Application should be careful about the TCD pool buffer storage class,

For the platform has cache, the software TCD should be put in non cache section
The TCD pool buffer should have a consistent storage class.

Note

This function enables the auto stop request feature.

Parameters:

tcd – Pointer to the TCD structure.
transfer – channel transfer configuration pointer.

void EDMA_TcdReset(edma_tcd_t *tcd)

Sets all fields to default values for the TCD structure.

@Note This API only supports EDMA4 TCD type. It can be used to support all types with extension API EDMA_TcdResetExt

This function sets all fields for this TCD structure to default value.

Note

This function enables the auto stop request feature.

Parameters:

tcd – Pointer to the TCD structure.

void EDMA_TcdSetTransferConfig(edma_tcd_t *tcd, const edma_transfer_config_t *config, edma_tcd_t *nextTcd)

Configures the eDMA TCD transfer attribute.

@Note This API only supports EDMA4 TCD type. It can be used to support all types with extension API EDMA_TcdSetTransferConfigExt

The TCD is a transfer control descriptor. The content of the TCD is the same as the hardware TCD registers. The TCD is used in the scatter-gather mode. This function configures the TCD transfer attribute, including source address, destination address, transfer size, address offset, and so on. It also configures the scatter gather feature if the user supplies the next TCD address. Example:

edma_transfer_t config = {
...
}
edma_tcd_t tcd __aligned(32);
edma_tcd_t nextTcd __aligned(32);
EDMA_TcdSetTransferConfig(&tcd, &config, &nextTcd);

Note

TCD address should be 32 bytes aligned or it causes an eDMA error.

Note

If the nextTcd is not NULL, the scatter gather feature is enabled and DREQ bit is cleared in the previous transfer configuration, which is set in the EDMA_TcdReset.

Parameters:

tcd – Pointer to the TCD structure.
config – Pointer to eDMA transfer configuration structure.
nextTcd – Pointer to the next TCD structure. It can be NULL if users do not want to enable scatter/gather feature.

void EDMA_TcdSetMinorOffsetConfig(edma_tcd_t *tcd, const edma_minor_offset_config_t *config)

Configures the eDMA TCD minor offset feature.

@Note This API only supports EDMA4 TCD type. It can be used to support all types with extension API EDMA_TcdSetMinorOffsetConfigExt

A minor offset is a signed-extended value added to the source address or a destination address after each minor loop.

Parameters:

tcd – A point to the TCD structure.
config – A pointer to the minor offset configuration structure.

void EDMA_TcdSetChannelLink(edma_tcd_t *tcd, edma_channel_link_type_t type, uint32_t linkedChannel)

Sets the channel link for the eDMA TCD.

@Note This API only supports EDMA4 TCD type. It can be used to support all types with extension API EDMA_TcdSetChannelLinkExt

This function configures either a minor link or a major link. The minor link means the channel link is triggered every time CITER decreases by 1. The major link means that the channel link is triggered when the CITER is exhausted.

Note

Users should ensure that DONE flag is cleared before calling this interface, or the configuration is invalid.

Parameters:

tcd – Point to the TCD structure.
type – Channel link type, it can be one of:
- kEDMA_LinkNone
- kEDMA_MinorLink
- kEDMA_MajorLink
linkedChannel – The linked channel number.

static inline void EDMA_TcdSetBandWidth(edma_tcd_t *tcd, edma_bandwidth_t bandWidth)

Sets the bandwidth for the eDMA TCD.

@Note This API only supports EDMA4 TCD type. It can be used to support all types with extension API EDMA_TcdSetBandWidthExt

Parameters:

tcd – A pointer to the TCD structure.
bandWidth – A bandwidth setting, which can be one of the following:
- kEDMABandwidthStallNone
- kEDMABandwidthStall4Cycle
- kEDMABandwidthStall8Cycle

void EDMA_TcdSetModulo(edma_tcd_t *tcd, edma_modulo_t srcModulo, edma_modulo_t destModulo)

Sets the source modulo and the destination modulo for the eDMA TCD.

@Note This API only supports EDMA4 TCD type. It can be used to support all types with extension API EDMA_TcdSetModuloExt

Parameters:

tcd – A pointer to the TCD structure.
srcModulo – A source modulo value.
destModulo – A destination modulo value.

static inline void EDMA_TcdEnableAutoStopRequest(edma_tcd_t *tcd, bool enable)

Sets the auto stop request for the eDMA TCD.

@Note This API only supports EDMA4 TCD type. It can be used to support all types with extension API EDMA_TcdEnableAutoStopRequestExt

If enabling the auto stop request, the eDMA hardware automatically disables the hardware channel request.

Parameters:

tcd – A pointer to the TCD structure.
enable – The command to enable (true) or disable (false).

void EDMA_TcdEnableInterrupts(edma_tcd_t *tcd, uint32_t mask)

Enables the interrupt source for the eDMA TCD.

@Note This API only supports EDMA4 TCD type. It can be used to support all types with extension API EDMA_TcdEnableInterruptsExt

Parameters:

tcd – Point to the TCD structure.
mask – The mask of interrupt source to be set. Users need to use the defined edma_interrupt_enable_t type.

void EDMA_TcdDisableInterrupts(edma_tcd_t *tcd, uint32_t mask)

Disables the interrupt source for the eDMA TCD.

@Note This API only supports EDMA4 TCD type. It can be used to support all types with extension API EDMA_TcdDisableInterruptsExt

Parameters:

tcd – Point to the TCD structure.
mask – The mask of interrupt source to be set. Users need to use the defined edma_interrupt_enable_t type.

void EDMA_TcdSetMajorOffsetConfig(edma_tcd_t *tcd, int32_t sourceOffset, int32_t destOffset)

Configures the eDMA TCD major offset feature.

@Note This API only supports EDMA4 TCD type. It can be used to support all types with extension API EDMA_TcdSetMajorOffsetConfigExt

Adjustment value added to the source address at the completion of the major iteration count

Parameters:

tcd – A point to the TCD structure.
sourceOffset – source address offset wiil be applied to source address after major loop done.
destOffset – destination address offset will be applied to source address after major loop done.

void EDMA_ConfigChannelSoftwareTCDExt(EDMA_Type *base, edma_tcd_t *tcd, const edma_transfer_config_t *transfer)

Sets TCD fields according to the user’s channel transfer configuration structure, edma_transfer_config_t.

Application should be careful about the TCD pool buffer storage class,

For the platform has cache, the software TCD should be put in non cache section
The TCD pool buffer should have a consistent storage class.

Note

This function enables the auto stop request feature.

Parameters:

base – eDMA peripheral base address.
tcd – Pointer to the TCD structure.
transfer – channel transfer configuration pointer.

void EDMA_TcdResetExt(EDMA_Type *base, edma_tcd_t *tcd)

Sets all fields to default values for the TCD structure.

This function sets all fields for this TCD structure to default value.

Note

This function enables the auto stop request feature.

Parameters:

base – eDMA peripheral base address.
tcd – Pointer to the TCD structure.

void EDMA_TcdSetTransferConfigExt(EDMA_Type *base, edma_tcd_t *tcd, const edma_transfer_config_t *config, edma_tcd_t *nextTcd)

Configures the eDMA TCD transfer attribute.

edma_transfer_t config = {
...
}
edma_tcd_t tcd __aligned(32);
edma_tcd_t nextTcd __aligned(32);
EDMA_TcdSetTransferConfig(&tcd, &config, &nextTcd);

Note

TCD address should be 32 bytes aligned or it causes an eDMA error.

Note

If the nextTcd is not NULL, the scatter gather feature is enabled and DREQ bit is cleared in the previous transfer configuration, which is set in the EDMA_TcdReset.

Parameters:

base – eDMA peripheral base address.
tcd – Pointer to the TCD structure.
config – Pointer to eDMA transfer configuration structure.
nextTcd – Pointer to the next TCD structure. It can be NULL if users do not want to enable scatter/gather feature.

void EDMA_TcdSetMinorOffsetConfigExt(EDMA_Type *base, edma_tcd_t *tcd, const edma_minor_offset_config_t *config)

Configures the eDMA TCD minor offset feature.

A minor offset is a signed-extended value added to the source address or a destination address after each minor loop.

Parameters:

base – eDMA peripheral base address.
tcd – A point to the TCD structure.
config – A pointer to the minor offset configuration structure.

void EDMA_TcdSetChannelLinkExt(EDMA_Type *base, edma_tcd_t *tcd, edma_channel_link_type_t type, uint32_t linkedChannel)

Sets the channel link for the eDMA TCD.

Note

Users should ensure that DONE flag is cleared before calling this interface, or the configuration is invalid.

Parameters:

base – eDMA peripheral base address.
tcd – Point to the TCD structure.
type – Channel link type, it can be one of:
- kEDMA_LinkNone
- kEDMA_MinorLink
- kEDMA_MajorLink
linkedChannel – The linked channel number.

static inline void EDMA_TcdSetBandWidthExt(EDMA_Type *base, edma_tcd_t *tcd, edma_bandwidth_t bandWidth)

Sets the bandwidth for the eDMA TCD.

Parameters:

base – eDMA peripheral base address.
tcd – A pointer to the TCD structure.
bandWidth – A bandwidth setting, which can be one of the following:
- kEDMABandwidthStallNone
- kEDMABandwidthStall4Cycle
- kEDMABandwidthStall8Cycle

void EDMA_TcdSetModuloExt(EDMA_Type *base, edma_tcd_t *tcd, edma_modulo_t srcModulo, edma_modulo_t destModulo)

Sets the source modulo and the destination modulo for the eDMA TCD.

Parameters:

base – eDMA peripheral base address.
tcd – A pointer to the TCD structure.
srcModulo – A source modulo value.
destModulo – A destination modulo value.

static inline void EDMA_TcdEnableAutoStopRequestExt(EDMA_Type *base, edma_tcd_t *tcd, bool enable)

Sets the auto stop request for the eDMA TCD.

If enabling the auto stop request, the eDMA hardware automatically disables the hardware channel request.

Parameters:

base – eDMA peripheral base address.
tcd – A pointer to the TCD structure.
enable – The command to enable (true) or disable (false).

void EDMA_TcdEnableInterruptsExt(EDMA_Type *base, edma_tcd_t *tcd, uint32_t mask)

Enables the interrupt source for the eDMA TCD.

Parameters:

base – eDMA peripheral base address.
tcd – Point to the TCD structure.
mask – The mask of interrupt source to be set. Users need to use the defined edma_interrupt_enable_t type.

void EDMA_TcdDisableInterruptsExt(EDMA_Type *base, edma_tcd_t *tcd, uint32_t mask)

Disables the interrupt source for the eDMA TCD.

Parameters:

base – eDMA peripheral base address.
tcd – Point to the TCD structure.
mask – The mask of interrupt source to be set. Users need to use the defined edma_interrupt_enable_t type.

void EDMA_TcdSetMajorOffsetConfigExt(EDMA_Type *base, edma_tcd_t *tcd, int32_t sourceOffset, int32_t destOffset)

Configures the eDMA TCD major offset feature.

Adjustment value added to the source address at the completion of the major iteration count

Parameters:

base – eDMA peripheral base address.
tcd – A point to the TCD structure.
sourceOffset – source address offset wiil be applied to source address after major loop done.
destOffset – destination address offset will be applied to source address after major loop done.

static inline void EDMA_EnableChannelRequest(EDMA_Type *base, uint32_t channel)

Enables the eDMA hardware channel request.

This function enables the hardware channel request.

Parameters:

base – eDMA peripheral base address.
channel – eDMA channel number.

static inline void EDMA_DisableChannelRequest(EDMA_Type *base, uint32_t channel)

Disables the eDMA hardware channel request.

This function disables the hardware channel request.

Parameters:

base – eDMA peripheral base address.
channel – eDMA channel number.

static inline void EDMA_TriggerChannelStart(EDMA_Type *base, uint32_t channel)

Starts the eDMA transfer by using the software trigger.

This function starts a minor loop transfer.

Parameters:

base – eDMA peripheral base address.
channel – eDMA channel number.

uint32_t EDMA_GetRemainingMajorLoopCount(EDMA_Type *base, uint32_t channel)

Gets the remaining major loop count from the eDMA current channel TCD.

This function checks the TCD (Task Control Descriptor) status for a specified eDMA channel and returns the number of major loop count that has not finished.

Note

1. This function can only be used to get unfinished major loop count of transfer without the next TCD, or it might be inaccuracy.

The unfinished/remaining transfer bytes cannot be obtained directly from registers while the channel is running. Because to calculate the remaining bytes, the initial NBYTES configured in DMA_TCDn_NBYTES_MLNO register is needed while the eDMA IP does not support getting it while a channel is active. In another word, the NBYTES value reading is always the actual (decrementing) NBYTES value the dma_engine is working with while a channel is running. Consequently, to get the remaining transfer bytes, a software-saved initial value of NBYTES (for example copied before enabling the channel) is needed. The formula to calculate it is shown below: RemainingBytes = RemainingMajorLoopCount * NBYTES(initially configured)

Parameters:

base – eDMA peripheral base address.
channel – eDMA channel number.

Returns:

Major loop count which has not been transferred yet for the current TCD.

static inline uint32_t EDMA_GetErrorStatusFlags(EDMA_Type *base)

Gets the eDMA channel error status flags.

Parameters:

base – eDMA peripheral base address.

Returns:

The mask of error status flags. Users need to use the _edma_error_status_flags type to decode the return variables.

uint32_t EDMA_GetChannelStatusFlags(EDMA_Type *base, uint32_t channel)

Gets the eDMA channel status flags.

Parameters:

base – eDMA peripheral base address.
channel – eDMA channel number.

Returns:

The mask of channel status flags. Users need to use the _edma_channel_status_flags type to decode the return variables.

void EDMA_ClearChannelStatusFlags(EDMA_Type *base, uint32_t channel, uint32_t mask)

Clears the eDMA channel status flags.

Parameters:

base – eDMA peripheral base address.
channel – eDMA channel number.
mask – The mask of channel status to be cleared. Users need to use the defined _edma_channel_status_flags type.

status_t EDMA_CreateHandle(edma_handle_t *handle, EDMA_Type *base, uint32_t channel)

Creates the eDMA handle.

This function is called if using the transactional API for eDMA. This function initializes the internal state of the eDMA handle.

Parameters:

handle – eDMA handle pointer. The eDMA handle stores callback function and parameters.
base – eDMA peripheral base address.
channel – eDMA channel number.

Return values:

kStatus_Success –
kStatus_InvalidArgument –

void EDMA_InstallTCDMemory(edma_handle_t *handle, edma_tcd_t *tcdPool, uint32_t tcdSize)

Installs the TCDs memory pool into the eDMA handle.

This function is called after the EDMA_CreateHandle to use scatter/gather feature. This function shall only be used while users need to use scatter gather mode. Scatter gather mode enables EDMA to load a new transfer control block (tcd) in hardware, and automatically reconfigure that DMA channel for a new transfer. Users need to prepare tcd memory and also configure tcds using interface EDMA_SubmitTransfer.

Parameters:

handle – eDMA handle pointer.
tcdPool – A memory pool to store TCDs. It must be 32 bytes aligned.
tcdSize – The number of TCD slots.

void EDMA_SetCallback(edma_handle_t *handle, edma_callback callback, void *userData)

Installs a callback function for the eDMA transfer.

This callback is called in the eDMA IRQ handler. Use the callback to do something after the current major loop transfer completes. This function will be called every time one tcd finished transfer.

Parameters:

handle – eDMA handle pointer.
callback – eDMA callback function pointer.
userData – A parameter for the callback function.

void EDMA_PrepareTransferConfig(edma_transfer_config_t *config, void *srcAddr, uint32_t srcWidth, int16_t srcOffset, void *destAddr, uint32_t destWidth, int16_t destOffset, uint32_t bytesEachRequest, uint32_t transferBytes)

Prepares the eDMA transfer structure configurations.

This function prepares the transfer configuration structure according to the user input.

Note

The data address and the data width must be consistent. For example, if the SRC is 4 bytes, the source address must be 4 bytes aligned, or it results in source address error (SAE). User can check if 128 bytes support is available for specific instance by FSL_FEATURE_EDMA_INSTANCE_SUPPORT_128_BYTES_TRANSFERn.

Parameters:

config – The user configuration structure of type edma_transfer_t.
srcAddr – eDMA transfer source address.
srcWidth – eDMA transfer source address width(bytes).
srcOffset – source address offset.
destAddr – eDMA transfer destination address.
destWidth – eDMA transfer destination address width(bytes).
destOffset – destination address offset.
bytesEachRequest – eDMA transfer bytes per channel request.
transferBytes – eDMA transfer bytes to be transferred.

void EDMA_PrepareTransfer(edma_transfer_config_t *config, void *srcAddr, uint32_t srcWidth, void *destAddr, uint32_t destWidth, uint32_t bytesEachRequest, uint32_t transferBytes, edma_transfer_type_t type)

Prepares the eDMA transfer structure.

This function prepares the transfer configuration structure according to the user input.

Note

The data address and the data width must be consistent. For example, if the SRC is 4 bytes, the source address must be 4 bytes aligned, or it results in source address error (SAE).

Parameters:

config – The user configuration structure of type edma_transfer_t.
srcAddr – eDMA transfer source address.
srcWidth – eDMA transfer source address width(bytes).
destAddr – eDMA transfer destination address.
destWidth – eDMA transfer destination address width(bytes).
bytesEachRequest – eDMA transfer bytes per channel request.
transferBytes – eDMA transfer bytes to be transferred.
type – eDMA transfer type.

void EDMA_PrepareTransferTCD(edma_handle_t *handle, edma_tcd_t *tcd, void *srcAddr, uint32_t srcWidth, int16_t srcOffset, void *destAddr, uint32_t destWidth, int16_t destOffset, uint32_t bytesEachRequest, uint32_t transferBytes, edma_tcd_t *nextTcd)

Prepares the eDMA transfer content descriptor.

This function prepares the transfer content descriptor structure according to the user input.

Note

The data address and the data width must be consistent. For example, if the SRC is 4 bytes, the source address must be 4 bytes aligned, or it results in source address error (SAE).

Parameters:

handle – eDMA handle pointer.
tcd – Pointer to eDMA transfer content descriptor structure.
srcAddr – eDMA transfer source address.
srcWidth – eDMA transfer source address width(bytes).
srcOffset – source address offset.
destAddr – eDMA transfer destination address.
destWidth – eDMA transfer destination address width(bytes).
destOffset – destination address offset.
bytesEachRequest – eDMA transfer bytes per channel request.
transferBytes – eDMA transfer bytes to be transferred.
nextTcd – eDMA transfer linked TCD address.

status_t EDMA_SubmitTransferTCD(edma_handle_t *handle, edma_tcd_t *tcd)

Submits the eDMA transfer content descriptor.

This function submits the eDMA transfer request according to the transfer content descriptor. In scatter gather mode, call this function will add a configured tcd to the circular list of tcd pool. The tcd pools is setup by call function EDMA_InstallTCDMemory before.

Typical user case:

submit single transfer

edma_tcd_t tcd;
EDMA_PrepareTransferTCD(handle, tcd, ....)
EDMA_SubmitTransferTCD(handle, tcd)
EDMA_StartTransfer(handle)

submit static link transfer,

edma_tcd_t tcd[2];
EDMA_PrepareTransferTCD(handle, &tcd[0], ....)
EDMA_PrepareTransferTCD(handle, &tcd[1], ....)
EDMA_SubmitTransferTCD(handle, &tcd[0])
EDMA_StartTransfer(handle)

submit dynamic link transfer

edma_tcd_t tcdpool[2];
EDMA_InstallTCDMemory(&g_DMA_Handle, tcdpool, 2);
edma_tcd_t tcd;
EDMA_PrepareTransferTCD(handle, tcd, ....)
EDMA_SubmitTransferTCD(handle, tcd)
EDMA_PrepareTransferTCD(handle, tcd, ....)
EDMA_SubmitTransferTCD(handle, tcd)
EDMA_StartTransfer(handle)

submit loop transfer

edma_tcd_t tcd[2];
EDMA_PrepareTransferTCD(handle, &tcd[0], ...,&tcd[1])
EDMA_PrepareTransferTCD(handle, &tcd[1], ..., &tcd[0])
EDMA_SubmitTransferTCD(handle, &tcd[0])
EDMA_StartTransfer(handle)

Parameters:

handle – eDMA handle pointer.
tcd – Pointer to eDMA transfer content descriptor structure.

Return values:

kStatus_EDMA_Success – It means submit transfer request succeed.
kStatus_EDMA_QueueFull – It means TCD queue is full. Submit transfer request is not allowed.
kStatus_EDMA_Busy – It means the given channel is busy, need to submit request later.

status_t EDMA_SubmitTransfer(edma_handle_t *handle, const edma_transfer_config_t *config)

Submits the eDMA transfer request.

This function submits the eDMA transfer request according to the transfer configuration structure. In scatter gather mode, call this function will add a configured tcd to the circular list of tcd pool. The tcd pools is setup by call function EDMA_InstallTCDMemory before.

Parameters:

handle – eDMA handle pointer.
config – Pointer to eDMA transfer configuration structure.

Return values:

kStatus_EDMA_Success – It means submit transfer request succeed.
kStatus_EDMA_QueueFull – It means TCD queue is full. Submit transfer request is not allowed.
kStatus_EDMA_Busy – It means the given channel is busy, need to submit request later.

status_t EDMA_SubmitLoopTransfer(edma_handle_t *handle, edma_transfer_config_t *transfer, uint32_t transferLoopCount)

Submits the eDMA scatter gather transfer configurations.

The function is target for submit loop transfer request, the ring transfer request means that the transfer request TAIL is link to HEAD, such as, A->B->C->D->A, or A->A

To use the ring transfer feature, the application should allocate several transfer object, such as

edma_channel_transfer_config_t transfer[2];
EDMA_TransferSubmitLoopTransfer(psHandle, &transfer, 2U);

Then eDMA driver will link transfer[0] and transfer[1] to each other

Note

Application should check the return value of this function to avoid transfer request submit failed

Parameters:

handle – eDMA handle pointer
transfer – pointer to user’s eDMA channel configure structure, see edma_channel_transfer_config_t for detail
transferLoopCount – the count of the transfer ring, if loop count is 1, that means that the one will link to itself.

Return values:

kStatus_Success – It means submit transfer request succeed
kStatus_EDMA_Busy – channel is in busy status
kStatus_InvalidArgument – Invalid Argument

void EDMA_StartTransfer(edma_handle_t *handle)

eDMA starts transfer.

This function enables the channel request. Users can call this function after submitting the transfer request or before submitting the transfer request.

Parameters:

handle – eDMA handle pointer.

void EDMA_StopTransfer(edma_handle_t *handle)

eDMA stops transfer.

This function disables the channel request to pause the transfer. Users can call EDMA_StartTransfer() again to resume the transfer.

Parameters:

handle – eDMA handle pointer.

void EDMA_AbortTransfer(edma_handle_t *handle)

eDMA aborts transfer.

This function disables the channel request and clear transfer status bits. Users can submit another transfer after calling this API.

Parameters:

handle – DMA handle pointer.

static inline uint32_t EDMA_GetUnusedTCDNumber(edma_handle_t *handle)

Get unused TCD slot number.

This function gets current tcd index which is run. If the TCD pool pointer is NULL, it will return 0.

Parameters:

handle – DMA handle pointer.

Returns:

The unused tcd slot number.

static inline uint32_t EDMA_GetNextTCDAddress(edma_handle_t *handle)

Get the next tcd address.

This function gets the next tcd address. If this is last TCD, return 0.

Parameters:

handle – DMA handle pointer.

Returns:

The next TCD address.

void EDMA_HandleIRQ(edma_handle_t *handle)

eDMA IRQ handler for the current major loop transfer completion.

This function clears the channel major interrupt flag and calls the callback function if it is not NULL.

Note: For the case using TCD queue, when the major iteration count is exhausted, additional operations are performed. These include the final address adjustments and reloading of the BITER field into the CITER. Assertion of an optional interrupt request also occurs at this time, as does a possible fetch of a new TCD from memory using the scatter/gather address pointer included in the descriptor (if scatter/gather is enabled).

For instance, when the time interrupt of TCD[0] happens, the TCD[1] has already been loaded into the eDMA engine. As sga and sga_index are calculated based on the DLAST_SGA bitfield lies in the TCD_CSR register, the sga_index in this case should be 2 (DLAST_SGA of TCD[1] stores the address of TCD[2]). Thus, the “tcdUsed” updated should be (tcdUsed - 2U) which indicates the number of TCDs can be loaded in the memory pool (because TCD[0] and TCD[1] have been loaded into the eDMA engine at this point already.).

For the last two continuous ISRs in a scatter/gather process, they both load the last TCD (The last ISR does not load a new TCD) from the memory pool to the eDMA engine when major loop completes. Therefore, ensure that the header and tcdUsed updated are identical for them. tcdUsed are both 0 in this case as no TCD to be loaded.

See the “eDMA basic data flow” in the eDMA Functional description section of the Reference Manual for further details.

Parameters:

handle – eDMA handle pointer.

void EDMA_TcdInit(EDMA_Type *base, edma_tcd_t *tcdRegs)

Initialize all fields to 0 for the TCD structure.

This function initialize all fields for this TCD structure to 0.

Parameters:

base – eDMA peripheral base address.
tcd – Pointer to the TCD structure.

FSL_EDMA_DRIVER_VERSION

eDMA driver version

Version 2.10.9.

_edma_transfer_status eDMA transfer status

Values:

enumerator kStatus_EDMA_QueueFull: TCD queue is full.

enumerator kStatus_EDMA_Busy: Channel is busy and can’t handle the transfer request.

enum _edma_transfer_size

eDMA transfer configuration

Values:

enumerator kEDMA_TransferSize1Bytes: Source/Destination data transfer size is 1 byte every time

enumerator kEDMA_TransferSize2Bytes: Source/Destination data transfer size is 2 bytes every time

enumerator kEDMA_TransferSize4Bytes: Source/Destination data transfer size is 4 bytes every time

enumerator kEDMA_TransferSize8Bytes: Source/Destination data transfer size is 8 bytes every time

enumerator kEDMA_TransferSize16Bytes: Source/Destination data transfer size is 16 bytes every time

enumerator kEDMA_TransferSize32Bytes: Source/Destination data transfer size is 32 bytes every time

enumerator kEDMA_TransferSize64Bytes: Source/Destination data transfer size is 64 bytes every time

enumerator kEDMA_TransferSize128Bytes: Source/Destination data transfer size is 128 bytes every time

enum _edma_modulo

eDMA modulo configuration

Values:

enumerator kEDMA_ModuloDisable: Disable modulo

enumerator kEDMA_Modulo2bytes: Circular buffer size is 2 bytes.

enumerator kEDMA_Modulo4bytes: Circular buffer size is 4 bytes.

enumerator kEDMA_Modulo8bytes: Circular buffer size is 8 bytes.

enumerator kEDMA_Modulo16bytes: Circular buffer size is 16 bytes.

enumerator kEDMA_Modulo32bytes: Circular buffer size is 32 bytes.

enumerator kEDMA_Modulo64bytes: Circular buffer size is 64 bytes.

enumerator kEDMA_Modulo128bytes: Circular buffer size is 128 bytes.

enumerator kEDMA_Modulo256bytes: Circular buffer size is 256 bytes.

enumerator kEDMA_Modulo512bytes: Circular buffer size is 512 bytes.

enumerator kEDMA_Modulo1Kbytes: Circular buffer size is 1 K bytes.

enumerator kEDMA_Modulo2Kbytes: Circular buffer size is 2 K bytes.

enumerator kEDMA_Modulo4Kbytes: Circular buffer size is 4 K bytes.

enumerator kEDMA_Modulo8Kbytes: Circular buffer size is 8 K bytes.

enumerator kEDMA_Modulo16Kbytes: Circular buffer size is 16 K bytes.

enumerator kEDMA_Modulo32Kbytes: Circular buffer size is 32 K bytes.

enumerator kEDMA_Modulo64Kbytes: Circular buffer size is 64 K bytes.

enumerator kEDMA_Modulo128Kbytes: Circular buffer size is 128 K bytes.

enumerator kEDMA_Modulo256Kbytes: Circular buffer size is 256 K bytes.

enumerator kEDMA_Modulo512Kbytes: Circular buffer size is 512 K bytes.

enumerator kEDMA_Modulo1Mbytes: Circular buffer size is 1 M bytes.

enumerator kEDMA_Modulo2Mbytes: Circular buffer size is 2 M bytes.

enumerator kEDMA_Modulo4Mbytes: Circular buffer size is 4 M bytes.

enumerator kEDMA_Modulo8Mbytes: Circular buffer size is 8 M bytes.

enumerator kEDMA_Modulo16Mbytes: Circular buffer size is 16 M bytes.

enumerator kEDMA_Modulo32Mbytes: Circular buffer size is 32 M bytes.

enumerator kEDMA_Modulo64Mbytes: Circular buffer size is 64 M bytes.

enumerator kEDMA_Modulo128Mbytes: Circular buffer size is 128 M bytes.

enumerator kEDMA_Modulo256Mbytes: Circular buffer size is 256 M bytes.

enumerator kEDMA_Modulo512Mbytes: Circular buffer size is 512 M bytes.

enumerator kEDMA_Modulo1Gbytes: Circular buffer size is 1 G bytes.

enumerator kEDMA_Modulo2Gbytes: Circular buffer size is 2 G bytes.

enum _edma_bandwidth

Bandwidth control.

Values:

enumerator kEDMA_BandwidthStallNone: No eDMA engine stalls.

enumerator kEDMA_BandwidthStall4Cycle: eDMA engine stalls for 4 cycles after each read/write.

enumerator kEDMA_BandwidthStall8Cycle: eDMA engine stalls for 8 cycles after each read/write.

enum _edma_channel_link_type

Channel link type.

Values:

enumerator kEDMA_LinkNone: No channel link

enumerator kEDMA_MinorLink: Channel link after each minor loop

enumerator kEDMA_MajorLink: Channel link while major loop count exhausted

_edma_channel_status_flags eDMA channel status flags.

Values:

enumerator kEDMA_DoneFlag: DONE flag, set while transfer finished, CITER value exhausted

enumerator kEDMA_ErrorFlag: eDMA error flag, an error occurred in a transfer

enumerator kEDMA_InterruptFlag: eDMA interrupt flag, set while an interrupt occurred of this channel

_edma_error_status_flags eDMA channel error status flags.

Values:

enumerator kEDMA_DestinationBusErrorFlag: Bus error on destination address

enumerator kEDMA_SourceBusErrorFlag: Bus error on the source address

enumerator kEDMA_ScatterGatherErrorFlag: Error on the Scatter/Gather address, not 32byte aligned.

enumerator kEDMA_NbytesErrorFlag: NBYTES/CITER configuration error

enumerator kEDMA_DestinationOffsetErrorFlag: Destination offset not aligned with destination size

enumerator kEDMA_DestinationAddressErrorFlag: Destination address not aligned with destination size

enumerator kEDMA_SourceOffsetErrorFlag: Source offset not aligned with source size

enumerator kEDMA_SourceAddressErrorFlag: Source address not aligned with source size

enumerator kEDMA_ErrorChannelFlag: Error channel number of the cancelled channel number

enumerator kEDMA_TransferCanceledFlag: Transfer cancelled

enumerator kEDMA_ValidFlag: No error occurred, this bit is 0. Otherwise, it is 1.

_edma_interrupt_enable eDMA interrupt source

Values:

enumerator kEDMA_ErrorInterruptEnable: Enable interrupt while channel error occurs.

enumerator kEDMA_MajorInterruptEnable: Enable interrupt while major count exhausted.

enumerator kEDMA_HalfInterruptEnable: Enable interrupt while major count to half value.

enum _edma_transfer_type

eDMA transfer type

Values:

enumerator kEDMA_MemoryToMemory: Transfer from memory to memory

enumerator kEDMA_PeripheralToMemory: Transfer from peripheral to memory

enumerator kEDMA_MemoryToPeripheral: Transfer from memory to peripheral

enumerator kEDMA_PeripheralToPeripheral: Transfer from Peripheral to peripheral

enum edma_channel_memory_attribute

eDMA channel memory attribute

Values:

enumerator kEDMA_ChannelNoWriteNoReadNoCacheNoBuffer: No write allocate, no read allocate, non-cacheable, non-bufferable.

enumerator kEDMA_ChannelNoWriteNoReadNoCacheBufferable: No write allocate, no read allocate, non-cacheable, bufferable.

enumerator kEDMA_ChannelNoWriteNoReadCacheableNoBuffer: No write allocate, no read allocate, cacheable, non-bufferable.

enumerator kEDMA_ChannelNoWriteNoReadCacheableBufferable: No write allocate, no read allocate, cacheable, bufferable.

enumerator kEDMA_ChannelNoWriteReadNoCacheNoBuffer: No write allocate, read allocate, non-cacheable, non-bufferable.

enumerator kEDMA_ChannelNoWriteReadNoCacheBufferable: No write allocate, read allocate, non-cacheable, bufferable.

enumerator kEDMA_ChannelNoWriteReadCacheableNoBuffer: No write allocate, read allocate, cacheable, non-bufferable.

enumerator kEDMA_ChannelNoWriteReadCacheableBufferable: No write allocate, read allocate, cacheable, bufferable.

enumerator kEDMA_ChannelWriteNoReadNoCacheNoBuffer: write allocate, no read allocate, non-cacheable, non-bufferable.

enumerator kEDMA_ChannelWriteNoReadNoCacheBufferable: write allocate, no read allocate, non-cacheable, bufferable.

enumerator kEDMA_ChannelWriteNoReadCacheableNoBuffer: write allocate, no read allocate, cacheable, non-bufferable.

enumerator kEDMA_ChannelWriteNoReadCacheableBufferable: write allocate, no read allocate, cacheable, bufferable.

enumerator kEDMA_ChannelWriteReadNoCacheNoBuffer: write allocate, read allocate, non-cacheable, non-bufferable.

enumerator kEDMA_ChannelWriteReadNoCacheBufferable: write allocate, read allocate, non-cacheable, bufferable.

enumerator kEDMA_ChannelWriteReadCacheableNoBuffer: write allocate, read allocate, cacheable, non-bufferable.

enumerator kEDMA_ChannelWriteReadCacheableBufferable: write allocate, read allocate, cacheable, bufferable.

enum _edma_channel_swap_size

eDMA4 channel swap size

Values:

enumerator kEDMA_ChannelSwapDisabled: Swap is disabled.

enumerator kEDMA_ChannelReadWith8bitSwap: Swap occurs with respect to the read 8bit.

enumerator kEDMA_ChannelReadWith16bitSwap: Swap occurs with respect to the read 16bit.

enumerator kEDMA_ChannelReadWith32bitSwap: Swap occurs with respect to the read 32bit.

enumerator kEDMA_ChannelWriteWith8bitSwap: Swap occurs with respect to the write 8bit.

enumerator kEDMA_ChannelWriteWith16bitSwap: Swap occurs with respect to the write 16bit.

enumerator kEDMA_ChannelWriteWith32bitSwap: Swap occurs with respect to the write 32bit.

eDMA channel system bus information, _edma_channel_sys_bus_info

Values:

enumerator kEDMA_PrivilegedAccessLevel: Privileged Access Level for DMA transfers. 0b - User protection level; 1b - Privileged protection level.

enumerator kEDMA_MasterId: DMA’s master ID when channel is active and master ID replication is enabled.

enum _edma_channel_access_type

eDMA4 channel access type

Values:

enumerator kEDMA_ChannelDataAccess: Data access for eDMA4 transfers.

enumerator kEDMA_ChannelInstructionAccess: Instruction access for eDMA4 transfers.

enum _edma_channel_protection_level

eDMA4 channel protection level

Values:

enumerator kEDMA_ChannelProtectionLevelUser: user protection level for eDMA transfers.

enumerator kEDMA_ChannelProtectionLevelPrivileged: Privileged protection level eDMA transfers.

typedef enum _edma_transfer_size edma_transfer_size_t: eDMA transfer configuration

typedef enum _edma_modulo edma_modulo_t: eDMA modulo configuration

typedef enum _edma_bandwidth edma_bandwidth_t: Bandwidth control.

typedef enum _edma_channel_link_type edma_channel_link_type_t: Channel link type.

typedef enum _edma_transfer_type edma_transfer_type_t: eDMA transfer type

typedef struct _edma_channel_Preemption_config edma_channel_Preemption_config_t: eDMA channel priority configuration

typedef struct _edma_minor_offset_config edma_minor_offset_config_t: eDMA minor offset configuration

typedef enum edma_channel_memory_attribute edma_channel_memory_attribute_t: eDMA channel memory attribute

typedef enum _edma_channel_swap_size edma_channel_swap_size_t: eDMA4 channel swap size

typedef enum _edma_channel_access_type edma_channel_access_type_t: eDMA4 channel access type

typedef enum _edma_channel_protection_level edma_channel_protection_level_t: eDMA4 channel protection level

typedef struct _edma_channel_config edma_channel_config_t: eDMA4 channel configuration

typedef edma_core_tcd_t edma_tcd_t

eDMA TCD.

This structure is same as TCD register which is described in reference manual, and is used to configure the scatter/gather feature as a next hardware TCD.

typedef struct _edma_transfer_config edma_transfer_config_t

edma4 channel transfer configuration

The transfer configuration structure support full feature configuration of the transfer control descriptor.

1.To perform a simple transfer, below members should be initialized at least .srcAddr - source address .dstAddr - destination address .srcWidthOfEachTransfer - data width of source address .dstWidthOfEachTransfer - data width of destination address, normally it should be as same as srcWidthOfEachTransfer .bytesEachRequest - bytes to be transferred in each DMA request .totalBytes - total bytes to be transferred .srcOffsetOfEachTransfer - offset value in bytes unit to be applied to source address as each source read is completed .dstOffsetOfEachTransfer - offset value in bytes unit to be applied to destination address as each destination write is completed enablchannelRequest - channel request can be enabled together with transfer configure submission

2.The transfer configuration structure also support advance feature: Programmable source/destination address range(MODULO) Programmable minor loop offset Programmable major loop offset Programmable channel chain feature Programmable channel transfer control descriptor link feature

Note

User should pay attention to the transfer size alignment limitation

the bytesEachRequest should align with the srcWidthOfEachTransfer and the dstWidthOfEachTransfer that is to say bytesEachRequest % srcWidthOfEachTransfer should be 0
the srcOffsetOfEachTransfer and dstOffsetOfEachTransfer must be aligne with transfer width
the totalBytes should align with the bytesEachRequest
the srcAddr should align with the srcWidthOfEachTransfer
the dstAddr should align with the dstWidthOfEachTransfer
the srcAddr should align with srcAddrModulo if modulo feature is enabled
the dstAddr should align with dstAddrModulo if modulo feature is enabled If anyone of above condition can not be satisfied, the edma4 interfaces will generate assert error.

typedef struct _edma_config edma_config_t: eDMA global configuration structure.

typedef void (*edma_callback)(struct _edma_handle *handle, void *userData, bool transferDone, uint32_t tcds)

Define callback function for eDMA.

This callback function is called in the EDMA interrupt handle. In normal mode, run into callback function means the transfer users need is done. In scatter gather mode, run into callback function means a transfer control block (tcd) is finished. Not all transfer finished, users can get the finished tcd numbers using interface EDMA_GetUnusedTCDNumber.

Param handle:: EDMA handle pointer, users shall not touch the values inside.
Param userData:: The callback user parameter pointer. Users can use this parameter to involve things users need to change in EDMA callback function.
Param transferDone:: If the current loaded transfer done. In normal mode it means if all transfer done. In scatter gather mode, this parameter shows is the current transfer block in EDMA register is done. As the load of core is different, it will be different if the new tcd loaded into EDMA registers while this callback called. If true, it always means new tcd still not loaded into registers, while false means new tcd already loaded into registers.
Param tcds:: How many tcds are done from the last callback. This parameter only used in scatter gather mode. It tells user how many tcds are finished between the last callback and this.

typedef struct _edma_handle edma_handle_t: eDMA transfer handle structure

FSL_EDMA_DRIVER_EDMA4: eDMA driver name

EDMA_ALLOCATE_TCD(name, number): Macro used for allocate edma TCD.

DMA_DCHPRI_INDEX(channel): Compute the offset unit from DCHPRI3.

struct _edma_channel_Preemption_config

#include <fsl_edma.h>

eDMA channel priority configuration

Public Members

bool enableChannelPreemption: If true: a channel can be suspended by other channel with higher priority

bool enablePreemptAbility: If true: a channel can suspend other channel with low priority

uint8_t channelPriority: Channel priority

struct _edma_minor_offset_config

#include <fsl_edma.h>

eDMA minor offset configuration

Public Members

bool enableSrcMinorOffset: Enable(true) or Disable(false) source minor loop offset.

bool enableDestMinorOffset: Enable(true) or Disable(false) destination minor loop offset.

uint32_t minorOffset: Offset for a minor loop mapping.

struct _edma_channel_config

#include <fsl_edma.h>

eDMA4 channel configuration

Public Members

edma_channel_Preemption_config_t channelPreemptionConfig: channel preemption configuration

edma_channel_memory_attribute_t channelReadMemoryAttribute: channel memory read attribute configuration

edma_channel_memory_attribute_t channelWriteMemoryAttribute: channel memory write attribute configuration

edma_channel_swap_size_t channelSwapSize: channel swap size configuration

edma_channel_access_type_t channelAccessType: channel access type configuration

uint8_t channelDataSignExtensionBitPosition: channel data sign extension bit psition configuration

uint32_t channelRequestSource: hardware service request source for the channel

bool enableMasterIDReplication: enable master ID replication

edma_channel_protection_level_t protectionLevel: protection level

struct _edma_transfer_config

#include <fsl_edma.h>

edma4 channel transfer configuration

The transfer configuration structure support full feature configuration of the transfer control descriptor.

Note

User should pay attention to the transfer size alignment limitation

the bytesEachRequest should align with the srcWidthOfEachTransfer and the dstWidthOfEachTransfer that is to say bytesEachRequest % srcWidthOfEachTransfer should be 0
the srcOffsetOfEachTransfer and dstOffsetOfEachTransfer must be aligne with transfer width
the totalBytes should align with the bytesEachRequest
the srcAddr should align with the srcWidthOfEachTransfer
the dstAddr should align with the dstWidthOfEachTransfer
the srcAddr should align with srcAddrModulo if modulo feature is enabled
the dstAddr should align with dstAddrModulo if modulo feature is enabled If anyone of above condition can not be satisfied, the edma4 interfaces will generate assert error.

Public Members

uint32_t srcAddr: Source data address.

uint32_t destAddr: Destination data address.

edma_transfer_size_t srcTransferSize: Source data transfer size.

edma_transfer_size_t destTransferSize: Destination data transfer size.

int16_t srcOffset: Sign-extended offset value in byte unit applied to the current source address to form the next-state value as each source read is completed

int16_t destOffset: Sign-extended offset value in byte unit applied to the current destination address to form the next-state value as each destination write is completed.

uint32_t minorLoopBytes: bytes in each minor loop or each request range: 1 - (2^30 -1) when minor loop mapping is enabled range: 1 - (2^10 - 1) when minor loop mapping is enabled and source or dest minor loop offset is enabled range: 1 - (2^32 - 1) when minor loop mapping is disabled

uint32_t majorLoopCounts: minor loop counts in each major loop, should be 1 at least for each transfer range: (0 - (2^15 - 1)) when minor loop channel link is disabled range: (0 - (2^9 - 1)) when minor loop channel link is enabled total bytes in a transfer = minorLoopCountsEachMajorLoop * bytesEachMinorLoop

uint16_t enabledInterruptMask: channel interrupt to enable, can be OR’ed value of _edma_interrupt_enable

edma_modulo_t srcAddrModulo: source circular data queue range

int32_t srcMajorLoopOffset: source major loop offset

edma_modulo_t dstAddrModulo: destination circular data queue range

int32_t dstMajorLoopOffset: destination major loop offset

bool enableSrcMinorLoopOffset: enable source minor loop offset

bool enableDstMinorLoopOffset: enable dest minor loop offset

int32_t minorLoopOffset: burst offset, the offset will be applied after minor loop update

bool enableChannelMajorLoopLink: channel link when major loop complete

uint32_t majorLoopLinkChannel: major loop link channel number

bool enableChannelMinorLoopLink: channel link when minor loop complete

uint32_t minorLoopLinkChannel: minor loop link channel number

edma_tcd_t *linkTCD: pointer to the link transfer control descriptor

struct _edma_config

#include <fsl_edma.h>

eDMA global configuration structure.

Public Members

bool enableMasterIdReplication: Enable (true) master ID replication. If Master ID replication is disabled, the privileged protection level (supervisor mode) for eDMA4 transfers is used.

bool enableGlobalChannelLink: Enable(true) channel linking is available and controlled by each channel’s link settings.

bool enableHaltOnError: Enable (true) transfer halt on error. Any error causes the HALT bit to set. Subsequently, all service requests are ignored until the HALT bit is cleared.

bool enableDebugMode: Enable(true) eDMA4 debug mode. When in debug mode, the eDMA4 stalls the start of a new channel. Executing channels are allowed to complete.

bool enableRoundRobinArbitration: Enable(true) channel linking is available and controlled by each channel’s link settings.

edma_channel_config_t *channelConfig[1]: channel preemption configuration

struct _edma_handle

#include <fsl_edma.h>

eDMA transfer handle structure

Public Members

edma_callback callback: Callback function for major count exhausted.

void *userData: Callback function parameter.

EDMA_ChannelType *channelBase: eDMA peripheral channel base address.

EDMA_Type *base: eDMA peripheral base address

EDMA_TCDType *tcdBase: eDMA peripheral tcd base address.

edma_tcd_t *tcdPool: Pointer to memory stored TCDs.

uint32_t channel: eDMA channel number.

volatile int8_t header: The first TCD index. Should point to the next TCD to be loaded into the eDMA engine.

volatile int8_t tail: The last TCD index. Should point to the next TCD to be stored into the memory pool.

volatile int8_t tcdUsed: The number of used TCD slots. Should reflect the number of TCDs can be used/loaded in the memory.

volatile int8_t tcdSize: The total number of TCD slots in the queue.

eDMA core Driver#

enum _edma_tcd_type

eDMA tcd flag type

Values:

enumerator kEDMA_EDMA4Flag: Data access for eDMA4 transfers.

enumerator kEDMA_EDMA5Flag: Instruction access for eDMA4 transfers.

typedef struct _edma_core_mp edma_core_mp_t: edma core channel struture definition

typedef struct _edma_core_channel edma_core_channel_t: edma core channel struture definition

typedef enum _edma_tcd_type edma_tcd_type_t: eDMA tcd flag type

typedef struct _edma5_core_tcd edma5_core_tcd_t: edma5 core TCD struture definition

typedef struct _edma4_core_tcd edma4_core_tcd_t: edma4 core TCD struture definition

typedef struct _edma_core_tcd edma_core_tcd_t: edma core TCD struture definition

typedef edma_core_channel_t EDMA_ChannelType: EDMA typedef.

typedef edma_core_tcd_t EDMA_TCDType

typedef void EDMA_Type

DMA_CORE_MP_CSR_EDBG_MASK

DMA_CORE_MP_CSR_ERCA_MASK

DMA_CORE_MP_CSR_HAE_MASK

DMA_CORE_MP_CSR_HALT_MASK

DMA_CORE_MP_CSR_GCLC_MASK

DMA_CORE_MP_CSR_GMRC_MASK

DMA_CORE_MP_CSR_EDBG(x)

DMA_CORE_MP_CSR_ERCA(x)

DMA_CORE_MP_CSR_HAE(x)

DMA_CORE_MP_CSR_HALT(x)

DMA_CORE_MP_CSR_GCLC(x)

DMA_CORE_MP_CSR_GMRC(x)

DMA_CSR_INTMAJOR_MASK

DMA_CSR_INTHALF_MASK

DMA_CSR_DREQ_MASK

DMA_CSR_ESG_MASK

DMA_CSR_BWC_MASK

DMA_CSR_BWC(x)

DMA_CSR_START_MASK

DMA_CITER_ELINKNO_CITER_MASK

DMA_BITER_ELINKNO_BITER_MASK

DMA_CITER_ELINKNO_CITER_SHIFT

DMA_CITER_ELINKYES_CITER_MASK

DMA_CITER_ELINKYES_CITER_SHIFT

DMA_ATTR_SMOD_MASK

DMA_ATTR_DMOD_MASK

DMA_CITER_ELINKNO_ELINK_MASK

DMA_CSR_MAJORELINK_MASK

DMA_BITER_ELINKYES_ELINK_MASK

DMA_CITER_ELINKYES_ELINK_MASK

DMA_CSR_MAJORLINKCH_MASK

DMA_BITER_ELINKYES_LINKCH_MASK

DMA_CITER_ELINKYES_LINKCH_MASK

DMA_NBYTES_MLOFFYES_MLOFF_MASK

DMA_NBYTES_MLOFFYES_DMLOE_MASK

DMA_NBYTES_MLOFFYES_SMLOE_MASK

DMA_NBYTES_MLOFFNO_NBYTES_MASK

DMA_ATTR_DMOD(x)

DMA_ATTR_SMOD(x)

DMA_BITER_ELINKYES_LINKCH(x)

DMA_CITER_ELINKYES_LINKCH(x)

DMA_NBYTES_MLOFFYES_MLOFF(x)

DMA_NBYTES_MLOFFYES_DMLOE(x)

DMA_NBYTES_MLOFFYES_SMLOE(x)

DMA_NBYTES_MLOFFNO_NBYTES(x)

DMA_NBYTES_MLOFFYES_NBYTES(x)

DMA_ATTR_DSIZE(x)

DMA_ATTR_SSIZE(x)

DMA_CSR_DREQ(x)

DMA_CSR_MAJORLINKCH(x)

DMA_CH_MATTR_WCACHE(x)

DMA_CH_MATTR_RCACHE(x)

DMA_CH_CSR_SIGNEXT_MASK

DMA_CH_CSR_SIGNEXT_SHIFT

DMA_CH_CSR_SWAP_MASK

DMA_CH_CSR_SWAP_SHIFT

DMA_CH_SBR_INSTR_MASK

DMA_CH_SBR_INSTR_SHIFT

DMA_CH_SBR_EMI_MASK

DMA_CH_SBR_EMI_SHIFT

DMA_CH_MUX_SOURCE(x)

DMA_ERR_DBE_FLAG: DMA error flag.

DMA_ERR_SBE_FLAG

DMA_ERR_SGE_FLAG

DMA_ERR_NCE_FLAG

DMA_ERR_DOE_FLAG

DMA_ERR_DAE_FLAG

DMA_ERR_SOE_FLAG

DMA_ERR_SAE_FLAG

DMA_ERR_ERRCHAN_FLAG

DMA_ERR_ECX_FLAG

DMA_ERR_FLAG

DMA_CLEAR_DONE_STATUS(base, channel): get/clear DONE bit

DMA_GET_DONE_STATUS(base, channel)

DMA_ENABLE_ERROR_INT(base, channel): enable/disable error interupt

DMA_DISABLE_ERROR_INT(base, channel)

DMA_CLEAR_ERROR_STATUS(base, channel): get/clear error status

DMA_GET_ERROR_STATUS(base, channel)

DMA_CLEAR_INT_STATUS(base, channel): get/clear INT status

DMA_GET_INT_STATUS(base, channel)

DMA_ENABLE_MAJOR_INT(base, channel): enable/dsiable MAJOR/HALF INT

DMA_ENABLE_HALF_INT(base, channel)

DMA_DISABLE_MAJOR_INT(base, channel)

DMA_DISABLE_HALF_INT(base, channel)

EDMA_TCD_ALIGN_SIZE: EDMA tcd align size.

EDMA_CORE_BASE(base): EDMA base address convert macro.

EDMA_MP_BASE(base)

EDMA_CHANNEL_BASE(base, channel)

EDMA_TCD_BASE(base, channel)

EDMA_TCD_TYPE(x): EDMA TCD type macro.

EDMA_TCD_SADDR(tcd, flag): EDMA TCD address convert macro.

EDMA_TCD_SOFF(tcd, flag)

EDMA_TCD_ATTR(tcd, flag)

EDMA_TCD_NBYTES(tcd, flag)

EDMA_TCD_SLAST(tcd, flag)

EDMA_TCD_DADDR(tcd, flag)

EDMA_TCD_DOFF(tcd, flag)

EDMA_TCD_CITER(tcd, flag)

EDMA_TCD_DLAST_SGA(tcd, flag)

EDMA_TCD_CSR(tcd, flag)

EDMA_TCD_BITER(tcd, flag)

struct _edma_core_mp

#include <fsl_edma_core.h>

edma core channel struture definition

Public Members

__IO uint32_t MP_CSR: Channel Control and Status, array offset: 0x10000, array step: 0x10000

__IO uint32_t MP_ES: Channel Error Status, array offset: 0x10004, array step: 0x10000

struct _edma_core_channel

#include <fsl_edma_core.h>

edma core channel struture definition

Public Members

__IO uint32_t CH_CSR: Channel Control and Status, array offset: 0x10000, array step: 0x10000

__IO uint32_t CH_ES: Channel Error Status, array offset: 0x10004, array step: 0x10000

__IO uint32_t CH_INT: Channel Interrupt Status, array offset: 0x10008, array step: 0x10000

__IO uint32_t CH_SBR: Channel System Bus, array offset: 0x1000C, array step: 0x10000

__IO uint32_t CH_PRI: Channel Priority, array offset: 0x10010, array step: 0x10000

struct _edma5_core_tcd

#include <fsl_edma_core.h>

edma5 core TCD struture definition

Public Members

__IO uint32_t SADDR: SADDR register, used to save source address

__IO uint32_t SADDR_HIGH: SADDR HIGH register, used to save source address

__IO uint16_t SOFF: SOFF register, save offset bytes every transfer

__IO uint16_t ATTR: ATTR register, source/destination transfer size and modulo

__IO uint32_t NBYTES: Nbytes register, minor loop length in bytes

__IO uint32_t SLAST: SLAST register

__IO uint32_t SLAST_SDA_HIGH: SLAST SDA HIGH register

__IO uint32_t DADDR: DADDR register, used for destination address

__IO uint32_t DADDR_HIGH: DADDR HIGH register, used for destination address

__IO uint32_t DLAST_SGA: DLASTSGA register, next tcd address used in scatter-gather mode

__IO uint32_t DLAST_SGA_HIGH: DLASTSGA HIGH register, next tcd address used in scatter-gather mode

__IO uint16_t DOFF: DOFF register, used for destination offset

__IO uint16_t CITER: CITER register, current minor loop numbers, for unfinished minor loop.

__IO uint16_t CSR: CSR register, for TCD control status

__IO uint16_t BITER: BITER register, begin minor loop count.

uint8_t RESERVED[16]: Aligned 64 bytes

struct _edma4_core_tcd

#include <fsl_edma_core.h>

edma4 core TCD struture definition

Public Members

__IO uint32_t SADDR: SADDR register, used to save source address

__IO uint16_t SOFF: SOFF register, save offset bytes every transfer

__IO uint16_t ATTR: ATTR register, source/destination transfer size and modulo

__IO uint32_t NBYTES: Nbytes register, minor loop length in bytes

__IO uint32_t SLAST: SLAST register

__IO uint32_t DADDR: DADDR register, used for destination address

__IO uint16_t DOFF: DOFF register, used for destination offset

__IO uint16_t CITER: CITER register, current minor loop numbers, for unfinished minor loop.

__IO uint32_t DLAST_SGA: DLASTSGA register, next tcd address used in scatter-gather mode

__IO uint16_t CSR: CSR register, for TCD control status

__IO uint16_t BITER: BITER register, begin minor loop count.

struct _edma_core_tcd: #include <fsl_edma_core.h>

edma core TCD struture definition

union MP_REGS

Public Members

struct _edma_core_mp EDMA5_REG

struct EDMA5_REG

Public Members

__IO uint32_t MP_INT_LOW: Channel Control and Status, array offset: 0x10008, array step: 0x10000

__I uint32_t MP_INT_HIGH: Channel Control and Status, array offset: 0x1000C, array step: 0x10000

__I uint32_t MP_HRS_LOW: Channel Control and Status, array offset: 0x10010, array step: 0x10000

__I uint32_t MP_HRS_HIGH: Channel Control and Status, array offset: 0x10014, array step: 0x10000

__IO uint32_t MP_STOPCH: Channel Control and Status, array offset: 0x10020, array step: 0x10000

__I uint32_t MP_SSR_LOW: Channel Control and Status, array offset: 0x10030, array step: 0x10000

__I uint32_t MP_SSR_HIGH: Channel Control and Status, array offset: 0x10034, array step: 0x10000

__IO uint32_t CH_GRPRI [64]: Channel Control and Status, array offset: 0x10100, array step: 0x10000

__IO uint32_t CH_MUX [64]: Channel Control and Status, array offset: 0x10200, array step: 0x10000

__IO uint32_t CH_PROT [64]: Channel Control and Status, array offset: 0x10400, array step: 0x10000

union CH_REGS

Public Members

struct _edma_core_channel EDMA5_REG

struct _edma_core_channel EDMA4_REG

struct EDMA5_REG

Public Members

__IO uint32_t CH_MATTR: Memory Attributes Register, array offset: 0x10018, array step: 0x8000

struct EDMA4_REG

Public Members

__IO uint32_t CH_MUX: Channel Multiplexor Configuration, array offset: 0x10014, array step: 0x10000

__IO uint16_t CH_MATTR: Memory Attributes Register, array offset: 0x10018, array step: 0x8000

union TCD_REGS

Public Members

edma4_core_tcd_t edma4_tcd

eDMA soc Driver#

void EDMA_SocRequestEnable(DMA_Type *base, uint32_t request, bool value)

Enable or disable EDMA request for SoC.

This function enables or disables a specific EDMA request by setting or clearing the corresponding bit in the AHBSC security general purpose register.

Parameters:

base – DMA peripheral base address (DMA0 or other DMA instance).
request – The EDMA request number to enable or disable.
value – true to enable the request, false to disable it.

FSL_EDMA_SOC_DRIVER_VERSION: Driver version 2.0.0.

FSL_EDMA_SOC_IP_DMA3: DMA IP version.

FSL_EDMA_SOC_IP_DMA4

EDMA_BASE_PTRS: DMA base table.

EDMA_CHN_IRQS

EDMA_CHANNEL_OFFSET: EDMA base address convert macro.

EDMA_CHANNEL_ARRAY_STEP(base)

EIM: error injection module#

FSL_EIM_DRIVER_VERSION: Driver version.

void EIM_Init(EIM_Type *base)

EIM module initialization function.

Parameters:

base – EIM base address.

void EIM_Deinit(EIM_Type *base): De-initializes the EIM.

ERM: error recording module#

void ERM_Init(ERM_Type *base)

ERM module initialization function.

Parameters:

base – ERM base address.

void ERM_Deinit(ERM_Type *base): De-initializes the ERM.

static inline void ERM_EnableInterrupts(ERM_Type *base, uint32_t channel, uint32_t mask)

ERM enable interrupts.

Parameters:

base – ERM peripheral base address.
channel – memory channel.
mask – single correction interrupt or non-correction interrupt enable to disable for one specific memory region. Refer to “_erm_interrupt_enable” enumeration.

static inline void ERM_DisableInterrupts(ERM_Type *base, uint32_t channel, uint32_t mask)

ERM module disable interrupts.

Parameters:

base – ERM base address.
channel – memory channel.
mask – single correction interrupt or non-correction interrupt enable to disable for one specific memory region. Refer to “_erm_interrupt_enable” enumeration.

static inline uint32_t ERM_GetInterruptStatus(ERM_Type *base, uint32_t channel)

Gets ERM interrupt flags.

Parameters:

base – ERM peripheral base address.

Returns:

ERM event flags.

static inline void ERM_ClearInterruptStatus(ERM_Type *base, uint32_t channel, uint32_t mask)

ERM module clear interrupt status flag.

Parameters:

base – ERM base address.
mask – event flag to clear. Refer to “_erm_interrupt_flag” enumeration.

uint32_t ERM_GetMemoryErrorAddr(ERM_Type *base, uint32_t channel)

ERM get memory error absolute address, which capturing the address of the last ECC event in Memory n.

Parameters:

base – ERM base address.
channel – memory channel.

Return values:

memory – error absolute address.

FSL_ERM_DRIVER_VERSION: Driver version.

ERM interrupt configuration structure, default settings all disabled, _erm_interrupt_enable.

This structure contains the settings for all of the ERM interrupt configurations.

Values:

enumerator kERM_SingleCorrectionIntEnable: Single Correction Interrupt Notification enable.

enumerator kERM_NonCorrectableIntEnable: Non-Correction Interrupt Notification enable.

enumerator kERM_AllInterruptsEnable: All Interrupts enable

ERM interrupt status, _erm_interrupt_flag.

This provides constants for the ERM event status for use in the ERM functions.

Values:

enumerator kERM_SingleBitCorrectionIntFlag: Single-Bit Correction Event.

enumerator kERM_NonCorrectableErrorIntFlag: Non-Correctable Error Event.

enumerator kERM_AllIntsFlag: All Events.

eSPI: Enhanced Serial Peripheral Interface#

enum _espi_port_type

eSPI PnCFG.TYPE register values.

Values:

enumerator kESPI_PortType_Unconfigured: 0000b: Unconfigured (reset condition).

enumerator kESPI_PortType_ACPIEndpoint: 0001b: ACPI style Endpoint.

enumerator kESPI_PortType_ACPIIndexData: 0010b: ACPI style Index/Data.

enumerator kESPI_PortType_BusMasterMemSingle: 0100b: Bus Master Mem Single.

enumerator kESPI_PortType_BusMasterFlashSingle: 0101b: Bus Master Flash Single.

enumerator kESPI_PortType_MailboxShared: 1000b: Mailbox Shared.

enumerator kESPI_PortType_MailboxSingle: 1001b: Mailbox Single.

enumerator kESPI_PortType_MailboxSplit: 1010b: Mailbox Split.

enumerator kESPI_PortType_MailboxOOBSplit: 1011b: Mailbox OOB Split.

enumerator kESPI_PortType_MailboxOEM: 1100b: Mailbox OEM.

enum _espi_saf_rx_completion_type

eSPI SAF read completion types.

Values:

enumerator kESPI_SAFReadMiddle: Middle completion of split sequence.

enumerator kESPI_SAFReadFirst: First completion of split sequence.

enumerator kESPI_SAFReadLast: Last completion of split sequence.

enumerator kESPI_SAFReadOnly: Only completion for single transaction.

enum _espi_flash_transaction_type

eSPI flash transaction types.

Values:

enumerator kESPI_FlashTransNone: No transaction.

enumerator kESPI_FlashTransRead: Read transaction.

enumerator kESPI_FlashTransWrite: Write transaction.

enumerator kESPI_FlashTransErase: Erase transaction.

enum _espi_enable_mode

eSPI/LPC enable mode encoding.

Values:

enumerator kESPI_Disable

enumerator kESPI_EnableESPI

enumerator kESPI_EnableLPC

enum _espi_read_req_size

Values:

enumerator kESPI_ReadReq64B

enumerator kESPI_ReadReq128B

enumerator kESPI_ReadReq256B

enumerator kESPI_ReadReq512B

enumerator kESPI_ReadReq1024B

enumerator kESPI_ReadReq2048B

enumerator kESPI_ReadReq4096B

enum _espi_mem_max_payload

Values:

enumerator kESPI_MemMax64B

enumerator kESPI_MemMax128B

enumerator kESPI_MemMax256B

enum _espi_flash_max_payload

Values:

enumerator kESPI_FlashMax64B

enumerator kESPI_FlashMax128B

enumerator kESPI_FlashMax256B

enumerator kESPI_FlashMax512B

enum _espi_oob_max_payload

Values:

enumerator kESPI_OOBMax64B

enumerator kESPI_OOBMax128B

enumerator kESPI_OOBMax256B

enum _espi_spi_mode

eSPI SPI capability mode.

Defines the SPI wire mode capabilities supported by the eSPI controller. These values are programmed into ESPICAP.SPICAP field to indicate which SPI modes the target supports to the host.

Mode encoding.

Single: Standard SPI using single data line (MOSI/MISO).
Dual: Dual SPI using 2 data lines (IO[1:0]).
Quad: Quad SPI using 4 data lines (IO[3:0]).

Values:

enumerator kESPI_SPIMode_SingleOnly: Single SPI only.

enumerator kESPI_SPIMode_SingleAndDual: Single + Dual SPI.

enumerator kESPI_SPIMode_SingleAndQuad: Single + Quad SPI.

enumerator kESPI_SPIMode_All: All modes: Single, Dual and Quad SPI

enum _espi_wrstat_values

eSPI WRSTAT field values (PnSTAT[WRSTAT] or STAT.WRSTAT).

These symbolic names document the 2-bit WRSTAT encoding used by the eSPI controller to indicate host flash request types. The numeric encoding comes from the eSPI specification; use these symbols in the driver instead of magic numbers for clarity.

Values:

enumerator kESPI_WRSTAT_NoRequest: 00b: No flash request / idle.

enumerator kESPI_WRSTAT_ReadRequest: 01b: Host read request.

enumerator kESPI_WRSTAT_WriteRequest: 10b: Host write request.

enumerator kESPI_WRSTAT_EraseRequest: 11b: Host erase request.

enum _espi_interrupt_enable

eSPI interrupt enable flags.

Values:

enumerator kESPI_PortInterruptEnable: Port interrupt enable.

enumerator kESPI_Port80InterruptEnable: Port 80 interrupt enable.

enumerator kESPI_BusResetInterruptEnable: Bus reset interrupt enable.

enumerator kESPI_IrqUpdateInterruptEnable: IRQ update interrupt enable.

enumerator kESPI_WireChangeInterruptEnable: Wire change interrupt enable.

enumerator kESPI_HostStallInterruptEnable: Host stall interrupt enable.

enumerator kESPI_CrcErrorInterruptEnable: CRC error interrupt enable.

enumerator kESPI_GpioInterruptEnable: GPIO interrupt enable.

enumerator kESPI_CsInterruptEnable: CS interrupt enable.

enumerator kESPI_AllInterruptEnable: All interrupts enable.

enum _espi_status_flags

eSPI status flags.

Values:

enumerator kESPI_PortInterruptFlag: Port interrupt flag.

enumerator kESPI_Port80InterruptFlag: Port 80 interrupt flag.

enumerator kESPI_BusResetFlag: Bus reset flag.

enumerator kESPI_IrqUpdateFlag: IRQ update flag.

enumerator kESPI_WireChangeFlag: Wire change flag.

enumerator kESPI_HostStallFlag: Host stall flag.

enumerator kESPI_CrcErrorFlag: CRC error flag.

enumerator kESPI_GpioFlag: GPIO flag.

enumerator kESPI_BusyFlag: Bus busy flag.

enumerator kESPI_InResetFlag: In reset flag.

enumerator kESPI_CompletionPendingFlag: Completion pending flag.

enumerator kESPI_MasterPendingFlag: Master pending flag.

enumerator kESPI_AlertPendingFlag: Alert pending flag.

enumerator kESPI_BusStatusFlags

enum _espi_port_interrupt_flags

eSPI port interrupt flags.

Values:

enumerator kESPI_PortErrorInterrupt: Error interrupt.

enumerator kESPI_PortReadInterrupt: Read interrupt.

enumerator kESPI_PortWriteInterrupt: Write interrupt.

enumerator kESPI_PortSpec0Interrupt: Special 0 interrupt.

enumerator kESPI_PortSpec1Interrupt: Special 1 interrupt.

enumerator kESPI_PortSpec2Interrupt: Special 2 interrupt.

enumerator kESPI_PortSpec3Interrupt: Special 3 interrupt.

enumerator kESPI_PortAllInterrupts

enum _espi_saf_erase_size

eSPI SAF erase size enumeration

Values:

enumerator kESPI_SAFErase2KB: 2 kB minimum erase sector.

enumerator kESPI_SAFErase4KB: 4 kB minimum erase sector.

enumerator kESPI_SAFErase8KB: 8 kB minimum erase sector.

enumerator kESPI_SAFErase16KB: 16 kB minimum erase sector.

enum _espi_max_speed

eSPI maximum SPI speed enumeration

Values:

enumerator kESPI_MaxSpeed20MHz: <= 20 MHz.

enumerator kESPI_MaxSpeed25MHz: <= 25 MHz (24 MHz).

enumerator kESPI_MaxSpeed33MHz: <= 33 MHz (30 MHz).

enumerator kESPI_MaxSpeed50MHz: <= 50 MHz (48 MHz).

enumerator kESPI_MaxSpeed66MHz: <= 66 MHz (60 MHz).

enum _espi_ram_size

eSPI RAM length.

Values:

enumerator kESPI_RamSize4B

enumerator kESPI_RamSize8B

enumerator kESPI_RamSize16B

enumerator kESPI_RamSize32B

enumerator kESPI_RamSize64B

enumerator kESPI_RamSize128B

enumerator kESPI_RamSize256B

enumerator kESPI_RamSize512B

enum _espi_addr_base

eSPI address base selection.

Determines how the port address is calculated:

Direct: Address = PnADDR[OFF]
Base0: Address = (MAPBASE[BASE0] << 16) | PnADDR[OFF]
Base1: Address = (MAPBASE[BASE1] << 16) | PnADDR[OFF]

Values:

enumerator kESPI_AddrBaseDirect: Direct addressing: 0x0000-0xFFFF (I/O or low memory)

enumerator kESPI_AddrBase0: Use MAPBASE[BASE0] as upper 16 bits

enumerator kESPI_AddrBase1: Use MAPBASE[BASE1] as upper 16 bits

enum _espi_sstcl

eSPI PnIRULESTAT.SSTCL (Status Set and Clear) values.

These values are written to PnIRULESTAT[19:16] to control port status transitions. The meaning depends on the port type configured in PnCFG[TYPE].

For Endpoint/Index-and-Data types (TYPE=0x1, 0x2):

Individual bits control specific status flags
Bit 0: Set RDPEND
Bit 1: Clear WRRDY
Bit 2: Clear RDPEND
Bit 3: Clear CMD (Endpoint only)

For Mailbox types (TYPE=0x8, 0x9, 0xA, 0xB):

Bits [1:0] control RDSTAT (Host Read / MCU Write direction)
Bits [3:2] control WRSTAT (Host Write / MCU Read direction)

For Bus Master types (TYPE=0x4, 0x5):

Value 0x1: Start memory/flash request

For SAF (Slave-Attached Flash):

Value 0x1: Send completion response

Values:

enumerator kESPI_SSTCL_ACPISetRdPend: Bit 0=1: Set RDPEND (read data pending).

enumerator kESPI_SSTCL_ACPIClrWrRdy: Bit 1=1: Clear WRRDY (write ready).

enumerator kESPI_SSTCL_ACPIClrRdPend: Bit 2=1: Clear RDPEND (read data pending).

enumerator kESPI_SSTCL_ACPIClrCmd: Bit 3=1: Clear CMD flag (Endpoint only).

enumerator kESPI_SSTCL_MailboxRdStarted: 01b: MCU started writing data.

enumerator kESPI_SSTCL_MailboxRdCompleted: 10b: MCU completed writing data.

enumerator kESPI_SSTCL_MailboxRdEmpty: 11b: Set read status to Empty.

enumerator kESPI_SSTCL_MailboxWrStarted: 01b << 2: MCU started reading (partial).

enumerator kESPI_SSTCL_MailboxWrEmpty: 11b << 2: Set write status to Empty.

enumerator kESPI_SSTCL_MailboxBothEmpty: Clear both RDSTAT and WRSTAT to Empty.

enumerator kESPI_SSTCL_OOBSendStart: Start OOB message send.

enumerator kESPI_SSTCL_OOBSendComplete: Complete OOB send, trigger host GET.

enumerator kESPI_SSTCL_OOBSendEmpty: Clear OOB send status.

enumerator kESPI_SSTCL_OOBRecvEmpty: Clear OOB receive status.

enumerator kESPI_SSTCL_MAFStart: Start memory/flash request (MAF).

enumerator kESPI_SSTCL_SAFCompletion: Send SAF completion response.

enumerator kESPI_SSTCL_SAFReqAccepted: Flash request accepted.

enum _espi_omflen_trans

eSPI OMFLEN[TRANS] field values.

Encodes the 2-bit TRANS field of PnOMFLEN for different port types. The same numeric values have context-specific meanings across OOB, bus mastering (memory/MAF), and SAF completion.

Reference: MCXA577 eSPI RM – Port OOB, Mastering, and Flash Length (PnOMFLEN).

Values:

enumerator kESPI_OMFLEN_OOB_ToHost: 00b: OOB message to host.

enumerator kESPI_OMFLEN_MasterToHost32: 00b: To host, 32-bit address read.

enumerator kESPI_OMFLEN_MasterToHost64: 01b: To host, 64-bit address read.

enumerator kESPI_OMFLEN_MasterFromHost32: 10b: From host, 32-bit address write.

enumerator kESPI_OMFLEN_MasterFromHost64: 11b: From host, 64-bit address write.

enumerator kESPI_OMFLEN_MAFReadFlash: 01b: Read flash (location in RAM).

enumerator kESPI_OMFLEN_MAFWriteFlash: 10b: Write/program flash (location in RAM).

enumerator kESPI_OMFLEN_MAFEraseFlash: 11b: Erase flash (sector info in RAM).

enumerator kESPI_OMFLEN_SAFCompletionFail: 00b: Completion failure (LEN=0).

enumerator kESPI_OMFLEN_SAFCompletionWithData: 01b: Completion with data (read).

enumerator kESPI_OMFLEN_SAFCompletionNoData: 10b: Completion with no data (write/erase).

enum _espi_port_error

eSPI port error codes (context-dependent on port type).

Values:

enumerator kESPI_PortError_None: No error.

enumerator kESPI_PortError_EndpointWriteOverrun: ERR0: Host wrote when WRDY=1.

enumerator kESPI_PortError_EndpointReadEmpty: ERR1: Host read when RPEND=0.

enumerator kESPI_PortError_EndpointInvalidSize: ERR2: Transfer size > 1 byte.

enumerator kESPI_PortError_MailboxInvalidAccess: ERR0: Invalid host read/write access.

enumerator kESPI_PortError_MailboxOverrunUnderrun: ERR1: Write overrun or read underrun.

enumerator kESPI_PortError_MailboxSizeOverflow: ERR2: Request size exceeds mailbox boundary.

enumerator kESPI_PortError_MailboxRAMBusError: ERR3: AHB/RAM access error.

enumerator kESPI_PortError_MasterFromHostFailed: ERR0: From-host transfer failed.

enumerator kESPI_PortError_MasterOverrunUnderrun: ERR1: Transfer timing error.

enumerator kESPI_PortError_MasterEraseFailed: ERR2: Flash erase failed.

enumerator kESPI_PortError_MasterBusError: ERR3: Bus master access error.

enum _espi_vw_rd_flags

eSPI Virtual Wire receive flags.

Symbolic names for bits reported by WIRERO. These indicate host-driven VWIRE signal states latched in the receive register.

Values:

enumerator kESPI_VWireRd_SlpS3N: Sleep State S3.

enumerator kESPI_VWireRd_SlpS4N: Sleep State S4.

enumerator kESPI_VWireRd_SlpS5N: Sleep State S5.

enumerator kESPI_VWireRd_SusStat: Suspend Status.

enumerator kESPI_VWireRd_PltRst: Platform Reset Request.

enumerator kESPI_VWireRd_OobRstWarn: OOB Reset Warning.

enumerator kESPI_VWireRd_HostRstWarn: Host Reset Warning.

enumerator kESPI_VWireRd_SusWarn: Suspend Warning.

enumerator kESPI_VWireRd_SusPwrdnAck: Suspend Power Well Acknowledge.

enumerator kESPI_VWireRd_SlpAN: Sleep AN.

enumerator kESPI_VWireRd_SlpLAN: Wired LAN Sleep.

enumerator kESPI_VWireRd_SlpWLAN: Wireless LAN Sleep.

enumerator kESPI_VWireRd_P2E: PCIe to EC group.

enumerator kESPI_VWireRd_HostC10N: Host entering C10 state.

enum _espi_vw_wr_flags

eSPI Virtual Wire write/ack flags (WIREWO)

Symbolic names for bits written to WIREWO to drive or acknowledge VWIRE signals to the host.

Values:

enumerator kESPI_VWireWr_DswPwrokRst: DSW / PWR OK / Reset (Wr).

enumerator kESPI_VWireWr_BootErrn: Boot error (active low, Wr).

enumerator kESPI_VWireWr_BootDone: Boot done (Wr).

enumerator kESPI_VWireWr_E2P: E2P field (Wr).

enumerator kESPI_VWireWr_SusAckN: Suspend acknowledge (active low, Wr).

enumerator kESPI_VWireWr_HostRstAck: Host reset acknowledge (Wr).

enumerator kESPI_VWireWr_Rcinn: RCINN group (Wr).

enumerator kESPI_VWireWr_Smin: SMIN group (Wr).

enumerator kESPI_VWireWr_Scin: SCIN group (Wr).

enumerator kESPI_VWireWr_Pmen: Power management enable (Wr).

enumerator kESPI_VWireWr_WakenScin: Wake enable / sensor input (Wr).

enumerator kESPI_VWireWr_OobRstAck: OOB reset acknowledge (Wr).

typedef enum _espi_port_type espi_port_type_t: eSPI PnCFG.TYPE register values.

typedef enum _espi_saf_rx_completion_type espi_saf_rx_completion_type_t: eSPI SAF read completion types.

typedef enum _espi_flash_transaction_type espi_flash_trans_type_t: eSPI flash transaction types.

typedef enum _espi_enable_mode espi_enable_mode_t: eSPI/LPC enable mode encoding.

typedef enum _espi_read_req_size espi_read_req_size_t

typedef enum _espi_mem_max_payload espi_mem_max_payload_t

typedef enum _espi_flash_max_payload espi_flash_max_payload_t

typedef enum _espi_oob_max_payload espi_oob_max_payload_t

typedef enum _espi_spi_mode espi_spi_mode_t

eSPI SPI capability mode.

Defines the SPI wire mode capabilities supported by the eSPI controller. These values are programmed into ESPICAP.SPICAP field to indicate which SPI modes the target supports to the host.

Mode encoding.

Single: Standard SPI using single data line (MOSI/MISO).
Dual: Dual SPI using 2 data lines (IO[1:0]).
Quad: Quad SPI using 4 data lines (IO[3:0]).

typedef enum _espi_wrstat_values espi_wrstat_values_t

eSPI WRSTAT field values (PnSTAT[WRSTAT] or STAT.WRSTAT).

typedef enum _espi_saf_erase_size espi_saf_erase_size_t: eSPI SAF erase size enumeration

typedef enum _espi_max_speed espi_max_speed_t: eSPI maximum SPI speed enumeration

typedef enum _espi_ram_size espi_ram_size_t: eSPI RAM length.

typedef enum _espi_addr_base espi_addr_base_t

eSPI address base selection.

Determines how the port address is calculated:

Direct: Address = PnADDR[OFF]
Base0: Address = (MAPBASE[BASE0] << 16) | PnADDR[OFF]
Base1: Address = (MAPBASE[BASE1] << 16) | PnADDR[OFF]

typedef enum _espi_sstcl espi_sstcl_t

eSPI PnIRULESTAT.SSTCL (Status Set and Clear) values.

These values are written to PnIRULESTAT[19:16] to control port status transitions. The meaning depends on the port type configured in PnCFG[TYPE].

For Endpoint/Index-and-Data types (TYPE=0x1, 0x2):

Individual bits control specific status flags
Bit 0: Set RDPEND
Bit 1: Clear WRRDY
Bit 2: Clear RDPEND
Bit 3: Clear CMD (Endpoint only)

For Mailbox types (TYPE=0x8, 0x9, 0xA, 0xB):

Bits [1:0] control RDSTAT (Host Read / MCU Write direction)
Bits [3:2] control WRSTAT (Host Write / MCU Read direction)

For Bus Master types (TYPE=0x4, 0x5):

Value 0x1: Start memory/flash request

For SAF (Slave-Attached Flash):

Value 0x1: Send completion response

typedef enum _espi_omflen_trans espi_omflen_trans_t

eSPI OMFLEN[TRANS] field values.

Encodes the 2-bit TRANS field of PnOMFLEN for different port types. The same numeric values have context-specific meanings across OOB, bus mastering (memory/MAF), and SAF completion.

Reference: MCXA577 eSPI RM – Port OOB, Mastering, and Flash Length (PnOMFLEN).

typedef enum _espi_port_error espi_port_error_t: eSPI port error codes (context-dependent on port type).

typedef struct _espi_port_config espi_port_config_t

eSPI per-port configuration structure (PnCFG/PnADDR/PnRAMUSE).

This describes one hardware port (Pn). ESPI_Init will program CFG, RAMUSE and ADDR for each entry if provided in espi_config_t::portConfig.

typedef struct _espi_config espi_config_t: eSPI configuration structure.

typedef struct _espi_port80_status espi_p80_status_t: Port 80 status structure.

typedef enum _espi_vw_rd_flags espi_vw_rd_flags_t

eSPI Virtual Wire receive flags.

Symbolic names for bits reported by WIRERO. These indicate host-driven VWIRE signal states latched in the receive register.

typedef enum _espi_vw_wr_flags espi_vw_wr_flags_t

eSPI Virtual Wire write/ack flags (WIREWO)

Symbolic names for bits written to WIREWO to drive or acknowledge VWIRE signals to the host.

typedef struct _espi_flash_request espi_flash_request_t: eSPI flash request structure.

typedef struct _espi_handle espi_handle_t

typedef void (*espi_common_callback_t)(ESPI_Type *base, uint32_t status, void *userData): eSPI common callback function pointer.

typedef void (*espi_port_callback_t)(ESPI_Type *base, espi_handle_t *handle, uint32_t port, uint32_t status, void *userData): eSPI port callback function pointer.

typedef void (*espi_flash_ops_t)(ESPI_Type *base, espi_handle_t *handle, espi_flash_request_t *req, void *userData): eSPI flash callback function pointer.

typedef struct _espi_callback_config espi_callback_config_t: eSPI callback configuration structure.

FSL_ESPI_DRIVER_VERSION

ESPI_INVALID_PORT

void ESPI_Init(ESPI_Type *base, const espi_config_t *config)

Initializes the eSPI peripheral.

This function enables the eSPI clock, configures the eSPI peripheral according to the configuration structure.

Parameters:

base – eSPI peripheral base address.
config – Pointer to the configuration structure.

void ESPI_Deinit(ESPI_Type *base)

Deinitializes the eSPI peripheral.

This function disables the eSPI peripheral and gates the eSPI clock.

Parameters:

base – eSPI peripheral base address.

void ESPI_GetDefaultConfig(espi_config_t *config)

Gets the default configuration structure.

This function initializes the eSPI configuration structure to default values.

Parameters:

config – Pointer to the configuration structure.

static inline uint32_t ESPI_GetStatusFlags(ESPI_Type *base)

Gets the eSPI status flags.

Parameters:

base – eSPI peripheral base address.

Returns:

Status flags mask. AND with _espi_status_flags to test specific flags.

static inline void ESPI_ClearStatusFlags(ESPI_Type *base, uint32_t mask)

Clears the eSPI status flags.

Parameters:

base – eSPI peripheral base address.
mask – Status flag mask, see _espi_status_flags.

static inline uint8_t *ESPI_GetPortRamBuffer(ESPI_Type *base, uint32_t port)

Gets a pointer to the RAM memory buffer.

Returns a pointer to the start of the mailbox RAM for a port.

Parameters:

base – eSPI peripheral base address.
port – Hardware port index.

Returns:

Pointer to the start of the mailbox/port RAM.

static inline uint32_t ESPI_GetFlashMaxPayload(ESPI_Type *base)

Gets the maximum flash payload size.

Calculates the configured maximum flash payload in bytes.

Parameters:

base – eSPI peripheral base address.

Returns:

Maximum flash payload size in bytes.

static inline void ESPI_EnableInterrupts(ESPI_Type *base, uint32_t mask)

Enables the eSPI interrupts.

Parameters:

base – eSPI peripheral base address.
mask – Interrupt source, see _espi_interrupt_enable.

static inline void ESPI_DisableInterrupts(ESPI_Type *base, uint32_t mask)

Disables the eSPI interrupts.

Parameters:

base – eSPI peripheral base address.
mask – Interrupt source, see _espi_interrupt_enable.

static inline uint32_t ESPI_GetEnabledInterrupts(ESPI_Type *base)

Gets the enabled eSPI interrupts.

Parameters:

base – eSPI peripheral base address.

Returns:

Enabled interrupts, see _espi_interrupt_enable.

static inline void ESPI_PushIrq(ESPI_Type *base, uint8_t irqNum)

Sets the IRQ push register.

This register allows the application to push an IRQ assert through eSPI.

Parameters:

base – eSPI peripheral base address.
irqNum – IRQ to push across to host.

static inline bool ESPI_IsIrqPushDone(ESPI_Type *base)

Check if IRQ Push is Done.

Parameters:

base – ESPI peripheral base address.

static inline espi_port_type_t ESPI_GetPortType(ESPI_Type *base, uint32_t port)

Gets the configured type of an eSPI port.

This function reads the PnCFG register and extracts the TYPE field, which indicates how the port interacts with the host (endpoint, mailbox, bus master, etc.).

Parameters:

base – eSPI peripheral base address.
port – Port index (0 to ESPI_PORT_COUNT-1).

Returns:

Port type value, see espi_port_type_t.

static inline void ESPI_EnablePortInterrupts(ESPI_Type *base, uint32_t port, uint32_t mask)

Enables the eSPI port interrupts.

Parameters:

base – eSPI peripheral base address.
port – eSPI port.
mask – Interrupt mask, see _espi_port_interrupt_flags.

static inline void ESPI_DisablePortInterrupts(ESPI_Type *base, uint32_t port, uint32_t mask)

Disables the eSPI port interrupts.

Parameters:

base – eSPI peripheral base address.
port – eSPI port.
mask – Interrupt mask, see _espi_port_interrupt_flags.

static inline uint32_t ESPI_GetPortStatus(ESPI_Type *base, uint32_t port)

Gets the eSPI port status.

Parameters:

base – eSPI peripheral base address.
port – eSPI port index.

Returns:

Port status flags.

static inline void ESPI_WritePortData(ESPI_Type *base, uint32_t port, uint32_t data)

Writes the eSPI port DATAOUT register.

This function writes a response byte to the DATAOUT register for endpoint or index/data port types.

Parameters:

base – eSPI peripheral base address.
port – eSPI port index.
data – Value to write to DATAOUT.

static inline void ESPI_ClearPortStatus(ESPI_Type *base, uint32_t port, uint32_t mask)

Clears the eSPI port status flags.

Parameters:

base – eSPI peripheral base address.
port – eSPI port index.
mask – Port interrupt status flag mask, see _espi_port_interrupt_flags.

static inline uint32_t ESPI_GetPortMailboxSize(ESPI_Type *base, uint32_t port)

Gets the mailbox maximum size (bytes) for a port.

Parameters:

base – eSPI peripheral base address.
port – Hardware port index.

Returns:

Mailbox size in bytes.

status_t ESPI_GetPort80Status(ESPI_Type *base, espi_p80_status_t *status)

Gets Port 80 status and POST codes.

This function reads the Port 80 status register and extracts the current POST code, previous POST code, and counter value. Port 80 is used by BIOS/UEFI to write Power-On Self-Test (POST) codes during boot for debugging purposes.

Parameters:

base – eSPI peripheral base address.
status – Pointer to structure to receive Port 80 status.

Return values:

kStatus_Success – Successfully read Port 80 status.
kStatus_Fail – Port 80 is not enabled.

static inline void ESPI_ResetPort80Counter(ESPI_Type *base)

Resets Port 80 counter.

This function resets the Port 80 POST code counter back to 0.

Parameters:

base – eSPI peripheral base address.

void ESPI_GetEndpointData(ESPI_Type *base, uint32_t port, uint32_t *idx, uint32_t *data)

Gets endpoint data fields from a port.

This function reads PnDATAIN and extracts the IDX field and DATA_LEN field.

Parameters:

base – eSPI peripheral base address.
port – eSPI port index.
idx – Pointer to store the extracted IDX field.
data – Pointer to store the extracted DATA_LEN field.

void ESPI_GetPortErrorStatus(ESPI_Type *base, uint32_t port, uint32_t pstat, espi_port_error_t *error)

Checks port error status.

Reads and interprets the error bits (ERR0-ERR3) from PnSTAT register. Returns a specific error code based on the port type.

Error bit interpretation depends on port type.

Note

Error status bits are read-only and automatically cleared by hardware when the error condition is resolved.

Note

Only returns the first error found (priority: ERR0 > ERR1 > ERR2 > ERR3).

Parameters:

base – eSPI peripheral base address.
port – Port number to check.
pstat – Port status from PnSTAT register.
error – Pointer to structure to receive error information.

static inline uint32_t ESPI_GetPortMsgLen(ESPI_Type *base, uint32_t port)

Gets the message length from DATAIN register.

This function reads the PnDATAIN register and extracts the DATA_LEN field, which indicates the number of bytes in the current mailbox message. The actual length is DATA_LEN + 1.

Parameters:

base – eSPI peripheral base address.
port – Port index.

Returns:

Message length in bytes.

static inline uint32_t ESPI_GetVWire(ESPI_Type *base)

Reads current Virtual Wire receive status.

Returns raw WIRERO bits so upper layers can inspect incoming VW signals.

Parameters:

base – eSPI peripheral base address.

Returns:

Raw WIRERO bitfield value.

status_t ESPI_SendVWire(ESPI_Type *base, espi_vw_wr_flags_t flag, uint32_t value)

Sends a virtual wire message.

Parameters:

base – eSPI peripheral base address.
flag – Virtual wire flag to send, see espi_vw_wr_flags_t.
value – Value to set for the wire.

Return values:

kStatus_Success – Operation completed.
kStatus_Busy – Previous write still pending.

void ESPI_TriggerOOBMsg(ESPI_Type *base, espi_handle_t *handle, uint32_t length)

Triggers an OOB message.

Programs PnOMFLEN.LEN and sets PnIRULESTAT.SSTCL to start an outbound OOB message.

Parameters:

base – eSPI peripheral base address.
handle – eSPI handle (provides OOB port index and ACK flag).
length – Message length in bytes (> 0).

status_t ESPI_SendOOB(ESPI_Type *base, espi_handle_t *handle, const uint8_t *data, uint32_t length, bool announce)

Send an Out-of-Band (OOB) message.

Copies length bytes into the OOB mailbox, triggers the OOB message.

Parameters:

base – eSPI peripheral base address.
handle – Optional eSPI handle to arm IRQ-driven ACK handling.
data – Pointer to data to send.
length – Number of bytes to send (>0).
announce – If true, set SSTCL to “Started by MCU” before copy.

Return values:

kStatus_Success – Message accepted and triggered.
kStatus_InvalidArgument – Invalid argument.

status_t ESPI_ReadOOB(ESPI_Type *base, espi_handle_t *handle, uint8_t *buffer, uint32_t *len)

Reads the OOB mailbox into a destination buffer.

Copies the OOB message into buffer (up to *len). *len receives the actual number of bytes copied. Returns kStatus_ESPI_Error if truncation occurred.

Parameters:

base – eSPI peripheral base address.
handle – eSPI handle.
buffer – Destination data buffer.
len – [in] Length of bytes to receive, [out] Length of actual received bytes.

Return values:

kStatus_Success – Read successfully (no truncation).
kStatus_ESPI_Error – Message truncated.

static inline void ESPI_SetFlashOpLen(ESPI_Type *base, uint32_t port, uint32_t type, uint32_t length)

Sets the flash operation length.

Configures the transaction type and payload length for a flash operation.

Parameters:

base – eSPI peripheral base address.
port – Hardware port index.
type – Flash transaction type.
length – Payload length in bytes.

void ESPI_SetFlashCompletion(ESPI_Type *base, uint32_t port, uint32_t tag, uint32_t state, uint32_t type)

Sets the flash completion status.

Updates the completion status fields for the specified port and tag.

Parameters:

base – eSPI peripheral base address.
port – Hardware port index.
tag – Transaction tag.
state – Transaction state.
type – Completion type.

void ESPI_CreateHandle(ESPI_Type *base, espi_handle_t *handle, const espi_config_t *config, espi_callback_config_t *callback, void *userData)

Initializes the eSPI handle.

Parameters:

base – eSPI peripheral base address.
handle – Pointer to the eSPI handle.
config – Pointer to the configuration structure.
callback – Pointer to callback configuration structure.
userData – User data.

void ESPI_FlashCreateHandle(ESPI_Type *base, espi_handle_t *handle, espi_flash_ops_t flashOps, uint32_t flashSize)

Initializes the eSPI flash functionality in the handle.

Parameters:

base – eSPI peripheral base address.
handle – Pointer to the eSPI handle.
flashOps – Pointer to flash backend operations.
flashSize – Flash address space size.

void ESPI_TransferHandleIRQ(ESPI_Type *base, espi_handle_t *handle)

eSPI IRQ handle function.

This function handles the eSPI transmit and receive IRQ request.

Parameters:

base – eSPI peripheral base address.
handle – Pointer to the eSPI handle.

struct _espi_port_config

#include <fsl_espi.h>

eSPI per-port configuration structure (PnCFG/PnADDR/PnRAMUSE).

This describes one hardware port (Pn). ESPI_Init will program CFG, RAMUSE and ADDR for each entry if provided in espi_config_t::portConfig.

Public Members

uint8_t type: Port type. Refer to espi_port_type_t.

uint8_t direction: PnCFG.DIRECTION (for single-direction mailbox).

uint32_t ramOffset: PnRAMUSE.OFF (byte address offset from RAMBASE).

espi_ram_size_t ramSize: PnRAMUSE.LEN encoding (4,8,…,512 bytes).

uint32_t addrOffset: PnADDR.OFF (offset within selected base).

uint8_t addrBase: PnADDR.BASE/ASZ encoding.

uint8_t idxOffset: PnADDR.IDXOFF.

struct _espi_config

#include <fsl_espi.h>

eSPI configuration structure.

Public Members

uint32_t ramBaseAddr: RAM base address.

uint16_t base0Addr: Base 0 address.

uint16_t base1Addr: Base 1 address.

bool enableSAF: Enable Slave Attached Flash.

bool enableOOB: Enable Out-Of-Band channel.

bool enableP80: Enable Port 80 capture/logic.

bool enableAlertPin: Alert pin enable.

uint8_t spiMode: SPI mode.

uint8_t busSpeed: Maximum SPI speed.

uint8_t enableMode: See espi_enable_mode_t.

uint8_t SAFEraseSize: SAF minimum erase sector size, see espi_saf_erase_size_t.

uint8_t maxSAFRxReqSize: Maximum read request size.

uint8_t maxPayloadSize: Maximum payload size.

uint8_t maxFlashPayloadSize: Maximum flash payload size.

uint8_t maxOOBPayloadSize: Maximum OOB payload size.

const espi_port_config_t *portConfig: Port configurations(array).

uint32_t portCount: Number of entries in portConfig.

struct _espi_port80_status

#include <fsl_espi.h>

Port 80 status structure.

Public Members

uint8_t currentCode: Current POST code.

uint8_t previousCode: Previous POST code.

uint8_t counter: POST code counter (0-15, wraps).

struct _espi_flash_request

#include <fsl_espi.h>

eSPI flash request structure.

Public Members

uint32_t addr: Flash address.

uint32_t length: Request length.

uint8_t tag: Transaction tag.

espi_flash_trans_type_t type: Transaction type.

uint8_t *data: Pointer to payload data.

bool readStart: Read request with address and length information.

struct _espi_callback_config

#include <fsl_espi.h>

eSPI callback configuration structure.

Public Members

espi_common_callback_t commonCallback: Global event callback.

espi_port_callback_t portCallback: Port event callback.

struct _espi_handle

#include <fsl_espi.h>

eSPI handle structure.

Public Members

espi_callback_config_t callback: Callback function.

void *userData: User data.

espi_flash_ops_t flashOps: Flash backend operations.

uint32_t flashSize: Flash address space size for bounds checking.

uint32_t addrOffset[ESPI_PORT_COUNT]: Cached PnADDR.OFF values for each port.

uint8_t oobPort: Port index for OOB (TYPE=Mailbox OOB Split).

uint8_t safPort: Port index for Slave Flash.

uint8_t mafPort: Port index for Bus Master Mem Single.

EWM: External Watchdog Monitor Driver#

void EWM_Init(EWM_Type *base, const ewm_config_t *config)

Initializes the EWM peripheral.

This function is used to initialize the EWM. After calling, the EWM runs immediately according to the configuration. Note that, except for the interrupt enable control bit, other control bits and registers are write once after a CPU reset. Modifying them more than once generates a bus transfer error.

This is an example.

ewm_config_t config;
EWM_GetDefaultConfig(&config);
config.compareHighValue = 0xAAU;
EWM_Init(ewm_base,&config);

Parameters:

base – EWM peripheral base address
config – The configuration of the EWM

void EWM_Deinit(EWM_Type *base)

Deinitializes the EWM peripheral.

This function is used to shut down the EWM.

Parameters:

base – EWM peripheral base address

void EWM_GetDefaultConfig(ewm_config_t *config)

Initializes the EWM configuration structure.

This function initializes the EWM configuration structure to default values. The default values are as follows.

ewmConfig->enableEwm = true;
ewmConfig->enableEwmInput = false;
ewmConfig->setInputAssertLogic = false;
ewmConfig->enableInterrupt = false;
ewmConfig->ewm_lpo_clock_source_t = kEWM_LpoClockSource0;
ewmConfig->prescaler = 0;
ewmConfig->compareLowValue = 0;
ewmConfig->compareHighValue = 0xFEU;

FGPIO Driver#

FLASH Driver#

enum _flash_driver_version_constants

Flash driver version for ROM.

Values:

enumerator kFLASH_DriverVersionName: Flash driver version name.

enumerator kFLASH_DriverVersionMajor: Major flash driver version.

enumerator kFLASH_DriverVersionMinor: Minor flash driver version.

enumerator kFLASH_DriverVersionBugfix: Bugfix for flash driver version.

FSL_ROMAPI_FLASH_DRIVER_VERSION: ROMAPI_FLASH driver version 2.0.0.

Flash driver status codes.

Values:

enumerator kStatus_FLASH_Success: API is executed successfully

enumerator kStatus_FLASH_InvalidArgument: Invalid argument

enumerator kStatus_FLASH_SizeError: Error size

enumerator kStatus_FLASH_AlignmentError: Parameter is not aligned with the specified baseline

enumerator kStatus_FLASH_AddressError: Address is out of range

enumerator kStatus_FLASH_AccessError: Invalid instruction codes and out-of bound addresses

enumerator kStatus_FLASH_ProtectionViolation: The program/erase operation is requested to execute on protected areas

enumerator kStatus_FLASH_CommandFailure: Run-time error during command execution.

enumerator kStatus_FLASH_UnknownProperty: Unknown property.

enumerator kStatus_FLASH_EraseKeyError: API erase key is invalid.

enumerator kStatus_FLASH_RegionExecuteOnly: The current region is execute-only.

enumerator kStatus_FLASH_ExecuteInRamFunctionNotReady: Execute-in-RAM function is not available.

enumerator kStatus_FLASH_CommandNotSupported: Flash API is not supported.

enumerator kStatus_FLASH_ReadOnlyProperty: The flash property is read-only.

enumerator kStatus_FLASH_InvalidPropertyValue: The flash property value is out of range.

enumerator kStatus_FLASH_InvalidSpeculationOption: The option of flash prefetch speculation is invalid.

enumerator kStatus_FLASH_EccError: A correctable or uncorrectable error during command execution.

enumerator kStatus_FLASH_CompareError: Destination and source memory contents do not match.

enumerator kStatus_FLASH_RegulationLoss: A loss of regulation during read.

enumerator kStatus_FLASH_InvalidWaitStateCycles: The wait state cycle set to r/w mode is invalid.

enumerator kStatus_FLASH_OutOfDateCfpaPage: CFPA page version is out of date.

enumerator kStatus_FLASH_BlankIfrPageData: Blank page cannnot be read.

enumerator kStatus_FLASH_EncryptedRegionsEraseNotDoneAtOnce: Encrypted flash subregions are not erased at once.

enumerator kStatus_FLASH_ProgramVerificationNotAllowed: Program verification is not allowed when the encryption is enabled.

enumerator kStatus_FLASH_HashCheckError: Hash check of page data is failed.

enumerator kStatus_FLASH_SealedFfrRegion: The FFR region is sealed.

enumerator kStatus_FLASH_FfrRegionWriteBroken: The FFR Spec region is not allowed to be written discontinuously.

enumerator kStatus_FLASH_NmpaAccessNotAllowed: The NMPA region is not allowed to be read/written/erased.

enumerator kStatus_FLASH_CmpaCfgDirectEraseNotAllowed: The CMPA Cfg region is not allowed to be erased directly.

enumerator kStatus_FLASH_FfrBankIsLocked: The FFR bank region is locked.

enumerator kStatus_FLASH_CfpaScratchPageInvalid: CFPA Scratch Page is invalid

enumerator kStatus_FLASH_CfpaVersionRollbackDisallowed: CFPA version rollback is not allowed

enumerator kStatus_FLASH_ReadHidingAreaDisallowed: Flash hiding read is not allowed

enumerator kStatus_FLASH_ModifyProtectedAreaDisallowed: Flash firewall page locked erase and program are not allowed

enumerator kStatus_FLASH_CommandOperationInProgress: The flash state is busy, indicate that a flash command in progress.

kStatusGroupGeneric: Flash driver status group.

kStatusGroupFlashDriver

MAKE_STATUS(group, code): Constructs a status code value from a group and a code number.

enum _flash_driver_api_keys

Enumeration for Flash driver API keys.

Note

The resulting value is built with a byte order such that the string being readable in expected order when viewed in a hex editor, if the value is treated as a 32-bit little endian value.

Values:

enumerator kFLASH_ApiEraseKey: Key value used to validate all flash erase APIs.

FOUR_CHAR_CODE(a, b, c, d): Constructs the four character code for the Flash driver API key.

Flash Pad Definitions.

Values:

enumerator kSerialFlash_1Pad

enumerator kSerialFlash_2Pads

enumerator kSerialFlash_4Pads

enumerator kSerialFlash_8Pads

FLEXSPI clock configuration type.

Values:

enumerator kFLEXSPIClk_SDR: Clock configure for SDR mode

enumerator kFLEXSPIClk_DDR: Clock configurat for DDR mode

enum _flexspi_read_sample_clk

FLEXSPI Read Sample Clock Source definition.

Values:

enumerator kFLEXSPIReadSampleClk_LoopbackInternally

enumerator kFLEXSPIReadSampleClk_LoopbackFromDqsPad

enumerator kFLEXSPIReadSampleClk_LoopbackFromSckPad

enumerator kFLEXSPIReadSampleClk_ExternalInputFromDqsPad

Flash Type Definition.

Values:

enumerator kFLEXSPIDeviceType_SerialNOR: Flash device is Serial NOR

Flash Configuration Command Type.

Values:

enumerator kDeviceConfigCmdType_Generic: Generic command, for example: configure dummy cycles, drive strength, etc

enumerator kDeviceConfigCmdType_QuadEnable: Quad Enable command

enumerator kDeviceConfigCmdType_Spi2Xpi: Switch from SPI to DPI/QPI/OPI mode

enumerator kDeviceConfigCmdType_Xpi2Spi: Switch from DPI/QPI/OPI to SPI mode

enumerator kDeviceConfigCmdType_Spi2NoCmd: Switch to 0-4-4/0-8-8 mode

enumerator kDeviceConfigCmdType_Reset: Reset device command

enum _flexspi_serial_clk_freq

Defintions for FLEXSPI Serial Clock Frequency.

Values:

enumerator kFLEXSPISerialClk_NoChange

enumerator kFLEXSPISerialClk_30MHz

enumerator kFLEXSPISerialClk_50MHz

enumerator kFLEXSPISerialClk_60MHz

enumerator kFLEXSPISerialClk_75MHz

enumerator kFLEXSPISerialClk_80MHz

enumerator kFLEXSPISerialClk_100MHz

enumerator kFLEXSPISerialClk_133MHz

enumerator kFLEXSPISerialClk_166MHz

Misc feature bit definitions.

Values:

enumerator kFLEXSPIMiscOffset_DiffClkEnable: Bit for Differential clock enable

enumerator kFLEXSPIMiscOffset_Ck2Enable: Bit for CK2 enable

enumerator kFLEXSPIMiscOffset_ParallelEnable: Bit for Parallel mode enable

enumerator kFLEXSPIMiscOffset_WordAddressableEnable: Bit for Word Addressable enable

enumerator kFLEXSPIMiscOffset_SafeConfigFreqEnable: Bit for Safe Configuration Frequency enable

enumerator kFLEXSPIMiscOffset_PadSettingOverrideEnable: Bit for Pad setting override enable

enumerator kFLEXSPIMiscOffset_DdrModeEnable: Bit for DDR clock confiuration indication.

enumerator kFLEXSPIMiscOffset_UseValidTimeForAllFreq: Bit for DLLCR settings under all modes

status_t FLASH_Init(flash_config_t *config)

Initializes the global flash properties structure members.

This function checks and initializes the Flash module for the other Flash APIs.

Parameters:

config – Pointer to the storage for the driver runtime state.

Return values:

kStatus_FLASH_Success – API was executed successfully.
kStatus_FLASH_InvalidArgument – An invalid argument is provided.
kStatus_FLASH_CommandFailure – Run-time error during the command execution.
kStatus_FLASH_CommandNotSupported – Flash API is not supported.
kStatus_FLASH_EccError – A correctable or uncorrectable error during command execution.
kStatus_FLASH_RegulationLoss – A loss of regulation during read.

status_t FLASH_EraseSector(flash_config_t *config, uint32_t start, uint32_t lengthInBytes, uint32_t key)

Erases the flash sectors encompassed by parameters passed into function.

This function erases the appropriate number of flash sectors based on the desired start address and length.

Parameters:

config – The pointer to the storage for the driver runtime state.
start – The start address of the desired flash memory to be erased. NOTE: The start address need to be 4 Bytes-aligned.
lengthInBytes – The length, given in bytes need be 4 Bytes-aligned.
key – The value used to validate all flash erase APIs.

Return values:

kStatus_FLASH_Success – API was executed successfully.
kStatus_FLASH_InvalidArgument – An invalid argument is provided.
kStatus_FLASH_AlignmentError – The parameter is not aligned with the specified baseline.
kStatus_FLASH_AddressError – The address is out of range.
kStatus_FLASH_EraseKeyError – The API erase key is invalid.
kStatus_FLASH_ModifyProtectedAreaDisallowed – Flash firewall page locked erase and program are not allowed
kStatus_FLASH_CommandFailure – Run-time error during the command execution.
kStatus_FLASH_CommandNotSupported – Flash API is not supported.
kStatus_FLASH_EccError – A correctable or uncorrectable error during command execution.
kStatus_FLASH_RegulationLoss – A loss of regulation during read.

status_t FLASH_ProgramPhrase(flash_config_t *config, uint32_t start, uint8_t *src, uint32_t lengthInBytes)

Programs flash with data at locations passed in through parameters.

This function programs the flash memory with the desired data for a given flash area as determined by the start address and the length.

Parameters:

config – A pointer to the storage for the driver runtime state.
start – The start address of the desired flash memory to be programmed. Must be word-aligned.
src – A pointer to the source buffer of data that is to be programmed into the flash.
lengthInBytes – The length, given in bytes (not words or long-words), to be programmed. Must be word-aligned.

Return values:

kStatus_FLASH_Success – API was executed successfully.
kStatus_FLASH_InvalidArgument – An invalid argument is provided.
kStatus_FLASH_AlignmentError – Parameter is not aligned with the specified baseline.
kStatus_FLASH_AddressError – Address is out of range.
kStatus_FLASH_AccessError – Invalid instruction codes and out-of bounds addresses.
kStatus_FLASH_ModifyProtectedAreaDisallowed – Flash firewall page locked erase and program are not allowed
kStatus_FLASH_CommandFailure – Run-time error during the command execution.
kStatus_FLASH_CommandNotSupported – Flash API is not supported.
kStatus_FLASH_RegulationLoss – A loss of regulation during read.
kStatus_FLASH_EccError – A correctable or uncorrectable error during command execution.

status_t FLASH_ProgramPage(flash_config_t *config, uint32_t start, uint8_t *src, uint32_t lengthInBytes)

Programs flash page with data at locations passed in through parameters.

This function programs the flash memory with the desired data for a given flash area as determined by the start address and the length.

Parameters:

config – A pointer to the storage for the driver runtime state.
start – The start address of the desired flash memory to be programmed. Must be word-aligned.
src – A pointer to the source buffer of data that is to be programmed into the flash.
lengthInBytes – The length, given in bytes (not words or long-words), to be programmed. Must be word-aligned.

Return values:

kStatus_FLASH_Success – API was executed successfully.
kStatus_FLASH_InvalidArgument – An invalid argument is provided.
kStatus_FLASH_AlignmentError – Parameter is not aligned with the specified baseline.
kStatus_FLASH_AddressError – Address is out of range.
kStatus_FLASH_AccessError – Invalid instruction codes and out-of bounds addresses.
kStatus_FLASH_ModifyProtectedAreaDisallowed – Flash firewall page locked erase and program are not allowed
kStatus_FLASH_CommandFailure – Run-time error during the command execution.
kStatus_FLASH_CommandNotSupported – Flash API is not supported.
kStatus_FLASH_RegulationLoss – A loss of regulation during read.
kStatus_FLASH_EccError – A correctable or uncorrectable error during command execution.

status_t FLASH_VerifyErasePhrase(flash_config_t *config, uint32_t start, uint32_t lengthInBytes)

Verifies an erasure of the desired flash area at phrase level.

This function checks the appropriate number of flash sectors based on the desired start address and length to check whether the flash is erased to the specified read margin level.

Parameters:

config – A pointer to the storage for the driver runtime state.
start – The start address of the desired flash memory to be verified. The start address does not need to be sector-aligned but must be word-aligned.
lengthInBytes – The length, given in bytes (not words or long-words), to be verified. Must be word-aligned.

Return values:

kStatus_FLASH_Success – API was executed successfully.
kStatus_FLASH_InvalidArgument – An invalid argument is provided.
kStatus_FLASH_AlignmentError – Parameter is not aligned with specified baseline.
kStatus_FLASH_AddressError – Address is out of range.
kStatus_FLASH_CommandFailure – Run-time error during the command execution.
kStatus_FLASH_CommandNotSupported – Flash API is not supported.
kStatus_FLASH_RegulationLoss – A loss of regulation during read.
kStatus_FLASH_EccError – A correctable or uncorrectable error during command execution.

status_t FLASH_VerifyErasePage(flash_config_t *config, uint32_t start, uint32_t lengthInBytes)

Verifies an erasure of the desired flash area at page level.

This function checks the appropriate number of flash sectors based on the desired start address and length to check whether the flash is erased to the specified read margin level.

Parameters:

config – A pointer to the storage for the driver runtime state.
start – The start address of the desired flash memory to be verified. The start address does not need to be sector-aligned but must be word-aligned.
lengthInBytes – The length, given in bytes (not words or long-words), to be verified. Must be word-aligned.

Return values:

kStatus_FLASH_Success – API was executed successfully.
kStatus_FLASH_InvalidArgument – An invalid argument is provided.
kStatus_FLASH_AlignmentError – Parameter is not aligned with specified baseline.
kStatus_FLASH_AddressError – Address is out of range.
kStatus_FLASH_CommandFailure – Run-time error during the command execution.
kStatus_FLASH_CommandNotSupported – Flash API is not supported.
kStatus_FLASH_RegulationLoss – A loss of regulation during read.
kStatus_FLASH_EccError – A correctable or uncorrectable error during command execution.

status_t FLASH_VerifyEraseSector(flash_config_t *config, uint32_t start, uint32_t lengthInBytes)

Verifies an erasure of the desired flash area at sector level.

This function checks the appropriate number of flash sectors based on the desired start address and length to check whether the flash is erased to the specified read margin level.

Parameters:

config – A pointer to the storage for the driver runtime state.
start – The start address of the desired flash memory to be verified. The start address does not need to be sector-aligned but must be word-aligned.
lengthInBytes – The length, given in bytes (not words or long-words), to be verified. Must be word-aligned.

Return values:

kStatus_FLASH_Success – API was executed successfully.
kStatus_FLASH_InvalidArgument – An invalid argument is provided.
kStatus_FLASH_AlignmentError – Parameter is not aligned with specified baseline.
kStatus_FLASH_AddressError – Address is out of range.
kStatus_FLASH_CommandFailure – Run-time error during the command execution.
kStatus_FLASH_CommandNotSupported – Flash API is not supported.
kStatus_FLASH_RegulationLoss – A loss of regulation during read.
kStatus_FLASH_EccError – A correctable or uncorrectable error during command execution.

status_t FLASH_VerifyProgram(flash_config_t *config, uint32_t start, uint32_t lengthInBytes, const uint8_t *expectedData, uint32_t *failedAddress, uint32_t *failedData)

Verifies programming of the desired flash area at a specified margin level.

This function verifies the data programed in the flash memory using the Flash Program Check Command and compares it to the expected data for a given flash area as determined by the start address and length.

Parameters:

config – A pointer to the storage for the driver runtime state.
start – The start address of the desired flash memory to be verified. Must be word-aligned.
lengthInBytes – The length, given in bytes (not words or long-words), to be verified. Must be word-aligned.
expectedData – A pointer to the expected data that is to be verified against.
failedAddress – A pointer to the returned failing address.
failedData – A pointer to the returned failing data. Some derivatives do not include failed data as part of the FCCOBx registers. In this case, zeros are returned upon failure.

Return values:

kStatus_FLASH_Success – API was executed successfully.
kStatus_FLASH_InvalidArgument – An invalid argument is provided.
kStatus_FLASH_AlignmentError – Parameter is not aligned with specified baseline.
kStatus_FLASH_AddressError – Address is out of range.
kStatus_FLASH_AccessError – Invalid instruction codes and out-of bounds addresses.
kStatus_FLASH_ReadHidingAreaDisallowed – Flash hiding read is not allowed
kStatus_FLASH_CommandFailure – Run-time error during the command execution.
kStatus_FLASH_CommandNotSupported – Flash API is not supported.
kStatus_FLASH_RegulationLoss – A loss of regulation during read.
kStatus_FLASH_EccError – A correctable or uncorrectable error during command execution.

status_t FLASH_GetProperty(flash_config_t *config, flash_property_tag_t whichProperty, uint32_t *value)

Returns the desired flash property.

Parameters:

config – A pointer to the storage for the driver runtime state.
whichProperty – The desired property from the list of properties in
- enum flash_property_tag_t
value – A pointer to the value returned for the desired flash property.

Return values:

kStatus_FLASH_Success – API was executed successfully.
kStatus_FLASH_InvalidArgument – An invalid argument is provided.
kStatus_FLASH_UnknownProperty – An unknown property tag.

standard_version_t FLASH_GetAPIVersion(flash_config_t *config)

Gets the flash driver version.

This function returns the version information of the flash driver.

Parameters:

config – A pointer to the storage for the driver runtime state.

Returns:

Flash driver version information.

status_t IFR_VerifyErasePhrase(flash_config_t *config, uint32_t start, uint32_t lengthInBytes)

Verifies an erasure of the desired IFR area at phrase level.

This function checks the appropriate number of flash sectors based on the desired start address and length to check whether the IFR is erased to the specified read margin level.

Parameters:

config – A pointer to the storage for the driver runtime state.
start – The start address of the desired IFR memory to be verified.
lengthInBytes – The length, given in bytes, to be verified.

Return values:

kStatus_FLASH_Success – API was executed successfully.
kStatus_FLASH_InvalidArgument – An invalid argument is provided.
kStatus_FLASH_AlignmentError – Parameter is not aligned with specified baseline.
kStatus_FLASH_AddressError – Address is out of range.
kStatus_FLASH_CommandFailure – Run-time error during the command execution.
kStatus_FLASH_CommandNotSupported – Flash API is not supported.
kStatus_FLASH_RegulationLoss – A loss of regulation during read.
kStatus_FLASH_EccError – A correctable or uncorrectable error during command execution.

status_t IFR_VerifyErasePage(flash_config_t *config, uint32_t start, uint32_t lengthInBytes)

Verifies an erasure of the desired IFR area at page level.

This function checks the appropriate number of flash sectors based on the desired start address and length to check whether the IFR is erased to the specified read margin level.

Parameters:

config – A pointer to the storage for the driver runtime state.
start – The start address of the desired IFR memory to be verified.
lengthInBytes – The length, given in bytes, to be verified.

Return values:

kStatus_FLASH_Success – API was executed successfully.
kStatus_FLASH_InvalidArgument – An invalid argument is provided.
kStatus_FLASH_AlignmentError – Parameter is not aligned with specified baseline.
kStatus_FLASH_AddressError – Address is out of range.
kStatus_FLASH_CommandFailure – Run-time error during the command execution.
kStatus_FLASH_CommandNotSupported – Flash API is not supported.
kStatus_FLASH_RegulationLoss – A loss of regulation during read.
kStatus_FLASH_EccError – A correctable or uncorrectable error during command execution.

status_t IFR_VerifyEraseSector(flash_config_t *config, uint32_t start, uint32_t lengthInBytes)

Verifies an erasure of the desired IFR area at sector level.

This function checks the appropriate number of flash sectors based on the desired start address and length to check whether the IFR is erased to the specified read margin level.

Parameters:

config – A pointer to the storage for the driver runtime state.
start – The start address of the desired IFR memory to be verified.
lengthInBytes – The length, given in bytes, to be verified.

Return values:

kStatus_FLASH_Success – API was executed successfully.
kStatus_FLASH_InvalidArgument – An invalid argument is provided.
kStatus_FLASH_AlignmentError – Parameter is not aligned with specified baseline.
kStatus_FLASH_AddressError – Address is out of range.
kStatus_FLASH_CommandFailure – Run-time error during the command execution.
kStatus_FLASH_CommandNotSupported – Flash API is not supported.
kStatus_FLASH_RegulationLoss – A loss of regulation during read.
kStatus_FLASH_EccError – A correctable or uncorrectable error during command execution.

status_t LPSPI_EepromInit(void)

Initialize SPI NOR/EEPROM.

Parameters:

baudRate – Config baudrate for SPI.

Return values:

kStatus_Fail – EEPROM initialization failed.
kStatus_InvalidArgument – Invalid input parameter.
kStatus_ROM_LPSPI_Busy – LPSPI transfer is busy.
kStatus_Success – The eeprom is initialized successfully.

status_t LPSPI_EepromRead(uint32_t address, uint32_t NoOfBytes, uint8_t *restrict buffer)

Read data via SPI NOR/EEPROM.

Parameters:

dest – A pointer to the buffer of data that is to be read from eeprom.
length – The length, given in bytes to be read.
address – The start address of the desired eeprom memory to be read.
requestFastRead – The type of Read eeprom command. FALSE: Use the general Read command to read eeprom TRUE: Use Fast Read command to read data from eeprom.

Return values:

kStatus_Fail – Failed to read data from eeprom.
kStatus_Success – Read data from eeprom successfully.
kStatus_InvalidArgument – Invalid input parameter.
kStatus_ROM_LPSPI_Busy – LPSPI transfer is busy.

status_t LPSPI_EepromWrite(uint32_t address, uint32_t NoOfBytes, const uint8_t *buffer)

Write data via SPI NOR/EEPROM.

Parameters:

data – A pointer to the source buffer of data that is to be programmed into the eeprom.
length – The length, given in bytes to be programmed.
address – The start address of the desired eeprom memory to be programed.

Return values:

kStatus_Fail – Failed to write data to eeprom.
kStatus_Success – Successfully write data to eeprom.
kStatus_InvalidArgument – Invalid input parameter.
kStatus_ROM_LPSPI_Busy – LPSPI transfer is busy.

status_t LPSPI_EepromErase(uint32_t address, uint32_t length)

Erase data via SPI NOR/EEPROM.

Parameters:

address – The start address of the desired eeprom memory to be erased.
option – The length, given in bytes to be erased.

Return values:

kStatus_Fail – Failed to erase data frome the eeprom.
kStatus_Success – Erase data from eeprom successfully.
kStatus_InvalidArgument – Invalid input parameter.
kStatus_ROM_LPSPI_Busy – LPSPI transfer is busy.

status_t LPSPI_EepromConfig(uint32_t *config)

Configure SPI EEPROM.

This function configures the SPI EEPROM with the given configuration parameters.

Parameters:

config – A pointer to the configuration parameters. The specific format depends on the EEPROM device type.

Return values:

kStatus_Fail – Failed to erase data frome the eeprom.
kStatus_Success – Erase data from eeprom successfully.
kStatus_InvalidArgument – Invalid input parameter.
kStatus_ROM_LPSPI_Busy – LPSPI transfer is busy.

status_t LPSPI_EepromFlush(void)

Flush SPI EEPROM.

This function flushes any pending operations and ensures all data is written to the SPI EEPROM.

Return values:

kStatus_Fail – Failed to erase data frome the eeprom.
kStatus_Success – Erase data from eeprom successfully.
kStatus_InvalidArgument – Invalid input parameter.
kStatus_ROM_LPSPI_Busy – LPSPI transfer is busy.

status_t LPSPI_EepromEraseAll(void)

Erase all SPI EEPROM.

This function erases the entire SPI EEPROM device.

Return values:

kStatus_Fail – Failed to erase data frome the eeprom.
kStatus_Success – Erase data from eeprom successfully.
kStatus_InvalidArgument – Invalid input parameter.
kStatus_ROM_LPSPI_Busy – LPSPI transfer is busy.

MAKE_VERSION(major, minor, bugfix): Constructs the version number for drivers.

enum _flash_property_tag

Enumeration for various flash properties.

Values:

enumerator kFLASH_PropertyPflashSectorSize: Pflash sector size property.

enumerator kFLASH_PropertyPflashTotalSize: Pflash total size property.

enumerator kFLASH_PropertyPflashBlockSize: Pflash block size property.

enumerator kFLASH_PropertyPflashBlockCount: Pflash block count property.

enumerator kFLASH_PropertyPflashBlockBaseAddr: Pflash block base address property.

enumerator kFLASH_PropertyPflashPageSize: Pflash page size property.

enumerator kFLASH_PropertyPflashSystemFreq: System Frequency System Frequency.

enumerator kFLASH_PropertyFfrSectorSize: FFR sector size property.

enumerator kFLASH_PropertyFfrTotalSize: FFR total size property.

enumerator kFLASH_PropertyFfrBlockBaseAddr: FFR block base address property.

enumerator kFLASH_PropertyFfrPageSize: FFR page size property.

enum _flash_max_erase_page_value

Enumeration for flash max pages to erase.

Values:

enumerator kFLASH_MaxPagesToErase: The max value in pages to erase.

enum _flash_alignment_property

Enumeration for flash alignment property.

Values:

enumerator kFLASH_AlignementUnitVerifyErase: The alignment unit in bytes used for verify erase operation.

enumerator kFLASH_AlignementUnitProgram: The alignment unit in bytes used for program operation.

enumerator kFLASH_AlignementUnitSingleWordRead: The alignment unit in bytes used for verify program operation. The alignment unit in bytes used for SingleWordRead command.

enum _flash_read_ecc_option

Enumeration for flash read ecc option.

Values:

enumerator kFLASH_ReadWithEccOn

enumerator kFLASH_ReadWithEccOff: ECC is on

enum _flash_read_margin_option

Enumeration for flash read margin option.

Values:

enumerator kFLASH_ReadMarginNormal: Normal read

enumerator kFLASH_ReadMarginVsProgram: Margin vs. program

enumerator kFLASH_ReadMarginVsErase: Margin vs. erase

enumerator kFLASH_ReadMarginIllegalBitCombination: Illegal bit combination

enum _flash_read_dmacc_option

Enumeration for flash read dmacc option.

Values:

enumerator kFLASH_ReadDmaccDisabled: Memory word

enumerator kFLASH_ReadDmaccEnabled: DMACC word

enum _flash_ramp_control_option

Enumeration for flash ramp control option.

Values:

enumerator kFLASH_RampControlDivisionFactorReserved: Reserved

enumerator kFLASH_RampControlDivisionFactor256: clk48mhz / 256 = 187.5KHz

enumerator kFLASH_RampControlDivisionFactor128: clk48mhz / 128 = 375KHz

enumerator kFLASH_RampControlDivisionFactor64: clk48mhz / 64 = 750KHz

enum _flexspi_status_groups

FLEXSPI status group numbers.

Values:

enumerator kStatusROMGroup_FLEXSPI: Group number for ROM FLEXSPI status codes.

enumerator kStatusROMGroup_FLEXSPINOR: ROM FLEXSPI NOR status group number.

enum _flexspi_nor_status

FLEXSPI NOR status.

Values:

enumerator kStatus_FLEXSPINOR_ProgramFail: Status for Page programming failure

enumerator kStatus_FLEXSPINOR_EraseSectorFail: Status for Sector Erase failure

enumerator kStatus_FLEXSPINOR_EraseAllFail: Status for Chip Erase failure

enumerator kStatus_FLEXSPINOR_WaitTimeout: Status for timeout

enumerator kStatus_FlexSPINOR_NotSupported: Status for PageSize overflow

enumerator kStatus_FlexSPINOR_WriteAlignmentError: Status for Alignement error

enumerator kStatus_FlexSPINOR_CommandFailure: Status for Erase/Program Verify Error

enumerator kStatus_FlexSPINOR_SFDP_NotFound: Status for SFDP read failure

enumerator kStatus_FLEXSPINOR_Unsupported_SFDP_Version: Status for Unrecognized SFDP version

enumerator kStatus_FLEXSPINOR_Flash_NotFound: Status for Flash detection failure

enumerator kStatus_FLEXSPINOR_DTRRead_DummyProbeFailed: Status for DDR Read dummy probe failure

enumerator kStatus_FLEXSPI_SequenceExecutionTimeout: Status for Sequence Execution timeout

enumerator kStatus_FLEXSPI_InvalidSequence: Status for Invalid Sequence

enumerator kStatus_FLEXSPI_DeviceTimeout: Status for Device timeout

Configure the device_type of “serial_nor_config_option_t” structure.

Values:

enumerator kSerialNorCfgOption_Tag

enumerator kSerialNorCfgOption_DeviceType_ReadSFDP_SDR

enumerator kSerialNorCfgOption_DeviceType_ReadSFDP_DDR

enumerator kSerialNorCfgOption_DeviceType_HyperFLASH1V8

enumerator kSerialNorCfgOption_DeviceType_HyperFLASH3V0

enumerator kSerialNorCfgOption_DeviceType_MacronixOctalDDR

enumerator kSerialNorCfgOption_DeviceType_MacronixOctalSDR

enumerator kSerialNorCfgOption_DeviceType_MicronOctalDDR

enumerator kSerialNorCfgOption_DeviceType_MicronOctalSDR

enumerator kSerialNorCfgOption_DeviceType_AdestoOctalDDR

enumerator kSerialNorCfgOption_DeviceType_AdestoOctalSDR

Configure the quad_mode_setting of “serial_nor_config_option_t” structure.

Values:

enumerator kSerialNorQuadMode_NotConfig

enumerator kSerialNorQuadMode_StatusReg1_Bit6

enumerator kSerialNorQuadMode_StatusReg2_Bit1

enumerator kSerialNorQuadMode_StatusReg2_Bit7

enumerator kSerialNorQuadMode_StatusReg2_Bit1_0x31

FLEXSPI NOR Octal mode.

Values:

enumerator kSerialNorOctaldMode_NoOctalEnableBit

enumerator kSerialNorOctaldMode_HasOctalEnableBit

miscellaneous mode

Values:

enumerator kSerialNorEnhanceMode_Disabled

enumerator kSerialNorEnhanceMode_0_4_4_Mode

enumerator kSerialNorEnhanceMode_0_8_8_Mode

enumerator kSerialNorEnhanceMode_DataOrderSwapped

enumerator kSerialNorEnhanceMode_2ndPinMux

enumerator kSerialNorEnhanceMode_InternalLoopback

enumerator kSerialNorEnhanceMode_SpiMode

enumerator kSerialNorEnhanceMode_ExtDqs

FLEXSPI NOR reset logic options.

Values:

enumerator kFlashResetLogic_Disabled

enumerator kFlashResetLogic_ResetPin

enumerator kFlashResetLogic_JedecHwReset

Configure the flash_connection of “serial_nor_config_option_t” structure.

Values:

enumerator kSerialNorConnection_SinglePortA

enumerator kSerialNorConnection_Parallel

enumerator kSerialNorConnection_SinglePortB

enumerator kSerialNorConnection_BothPorts

FLEXSPI ROOT clock soruce related definitions.

Values:

enumerator kFLEXSPIClkSrc_MainClk

enumerator kFLEXSPIClkSrc_Pll0

enumerator kFLEXSPIClkSrc_FroHf

enumerator kFLEXSPIClkSrc_Pll1

Restore sequence options Configure the restore_sequence of “flash_run_context_t” structure.

Values:

enumerator kRestoreSequence_None

enumerator kRestoreSequence_HW_Reset

enumerator kRestoreSequence_QPI_4_0xFFs

enumerator kRestoreSequence_QPI_Mode_0x00

enumerator kRestoreSequence_8QPI_FF

enumerator kRestoreSequence_Send_F0

enumerator kRestoreSequence_Send_66_99

enumerator kRestoreSequence_Send_6699_9966

enumerator kRestoreSequence_Send_06_FF: Adesto EcoXIP

enumerator kRestoreSequence_QPI_5_0xFFs

enumerator kRestoreSequence_Send_QPI_8_0xFFs

enumerator kRestoreSequence_Wakeup_0xAB

enumerator kRestoreSequence_Wakeup_0xAB_54

Port mode options.

Values:

enumerator kFlashInstMode_ExtendedSpi

enumerator kFlashInstMode_0_4_4_SDR

enumerator kFlashInstMode_0_4_4_DDR

enumerator kFlashInstMode_DPI_SDR

enumerator kFlashInstMode_DPI_DDR

enumerator kFlashInstMode_QPI_SDR

enumerator kFlashInstMode_QPI_DDR

enumerator kFlashInstMode_OPI_SDR

enumerator kFlashInstMode_OPI_DDR

Manufacturer ID.

Values:

enumerator kSerialFlash_ISSI_ManufacturerID: Manufacturer ID of the ISSI serial flash

enumerator kSerialFlash_Adesto_ManufacturerID: Manufacturer ID of the Adesto Technologies serial flash

enumerator kSerialFlash_Winbond_ManufacturerID: Manufacturer ID of the Winbond serial flash

enumerator kSerialFlash_Cypress_ManufacturerID: Manufacturer ID for Cypress

enum _flexspi_operation

flexspi operation.

Values:

enumerator kFLEXSPIOperation_Command: Only command, both TX and RX buffer are ignored.

enumerator kFLEXSPIOperation_Config: Configure device mode, the TX FIFO size is fixed in LUT.

enumerator kFLEXSPIOperation_Write: Write, only TX buffer is effective

enumerator kFLEXSPIOperation_Read: Read, only Rx Buffer is effective.

enumerator kFLEXSPIOperation_End

enum flexspi_clock_type_t

FLEXSPI Clock Type.

Values:

enumerator kFlexSpiClock_CoreClock: ARM Core Clock

enumerator kFlexSpiClock_AhbClock: AHB clock

enumerator kFlexSpiClock_SerialRootClock: Serial Root Clock

enumerator kFlexSpiClock_IpgClock: IPG clock

LPSPI Flash status codes.

Values:

enumerator kStatus_ROM_LPSPI_Busy: LPSPI transfer is busy.

enumerator kStatus_ROM_LPSPI_Error: LPSPI driver error.

enumerator kStatus_ROM_LPSPI_Idle: LPSPI is idle.

enumerator kStatus_ROM_LPSPI_OutOfRange: LPSPI transfer out Of range.

typedef enum _flash_property_tag flash_property_tag_t: Enumeration for various flash properties.

typedef struct _flash_ecc_log flash_ecc_log_t: Flash ECC log info.

typedef struct _flash_mode_config flash_mode_config_t: Flash controller paramter config.

typedef struct _flash_ffr_config flash_ffr_config_t: Flash controller paramter config.

typedef union StandardVersion standard_version_t: Structure of version property.

typedef struct _serial_nor_config_option serial_nor_config_option_t: Serial NOR configuration option.

typedef struct _lut_sequence flexspi_lut_seq_t: FLEXSPI LUT Sequence structure.

typedef struct _FlexSPIConfig flexspi_mem_config_t: FLEXSPI Memory Configuration Block.

typedef struct _flexspi_nor_config flexspi_nor_config_t: Serial NOR configuration block.

typedef enum _flexspi_operation flexspi_operation_t: flexspi operation.

typedef struct _flexspi_xfer flexspi_xfer_t: FLEXSPI Transfer Context.

status_t FLEXSPI_NorFlash_Init(uint32_t instance, flexspi_nor_config_t *config)

Initialize Serial NOR devices via FLEXSPI.

This function checks and initializes the FLEXSPI module for the other FLEXSPI APIs.

Parameters:

instance – storage the instance of FLEXSPI.
config – A pointer to the storage for the driver runtime state.

Return values:

kStatus_Success – Api was executed succesfuly.
kStatus_InvalidArgument – A invalid argument is provided.
kStatus_FLEXSPI_InvalidSequence – A invalid Sequence is provided.
kStatus_FLEXSPI_SequenceExecutionTimeout – Sequence Execution timeout.
kStatus_FLEXSPI_DeviceTimeout – the device timeout

status_t FLEXSPI_NorFlash_ProgramPage(uint32_t instance, flexspi_nor_config_t *config, uint32_t dstAddr, const uint32_t *src)

Program page data to Serial NOR via FLEXSPI.

This function programs the NOR flash memory with the dest address for a given flash area as determined by the dst address and the length.

Parameters:

instance – storage the instance of FLEXSPI.
config – A pointer to the storage for the driver runtime state.
dstAddr – A pointer to the desired flash memory to be programmed. NOTE: It is recommended that use page aligned access; If the dst_addr is not aligned to page,the driver automatically aligns address down with the page address.
src – A pointer to the source buffer of data that is to be programmed into the NOR flash.

Return values:

kStatus_Success – Api was executed succesfuly.
kStatus_InvalidArgument – A invalid argument is provided.
kStatus_FLEXSPI_InvalidSequence – A invalid Sequence is provided.
kStatus_FLEXSPI_SequenceExecutionTimeout – Sequence Execution timeout.
kStatus_FLEXSPI_DeviceTimeout – the device timeout

status_t FLEXSPI_NorFlash_EraseAll(uint32_t instance, flexspi_nor_config_t *config)

Erase all the Serial NOR devices connected on FLEXSPI.

Parameters:

instance – storage the instance of FLEXSPI.
config – A pointer to the storage for the driver runtime state.

Return values:

kStatus_Success – Api was executed succesfuly.
kStatus_InvalidArgument – A invalid argument is provided.
kStatus_FLEXSPI_InvalidSequence – A invalid Sequence is provided.
kStatus_FLEXSPI_SequenceExecutionTimeout – Sequence Execution timeout.
kStatus_FLEXSPI_DeviceTimeout – the device timeout

status_t FLEXSPI_NorFlash_EraseSector(uint32_t instance, flexspi_nor_config_t *config, uint32_t address)

Erase one sector specified by address.

This function erases one of NOR flash sectors based on the desired address.

Parameters:

instance – storage the index of FLEXSPI.
config – A pointer to the storage for the driver runtime state.
address – The start address of the desired NOR flash memory to be erased. NOTE: It is recommended that use sector-aligned access nor device; If dstAddr is not aligned with the sector,The driver automatically aligns address down with the sector address.

Return values:

kStatus_Success – Api was executed succesfuly.
kStatus_InvalidArgument – A invalid argument is provided.
kStatus_FLEXSPI_InvalidSequence – A invalid Sequence is provided.
kStatus_FLEXSPI_SequenceExecutionTimeout – Sequence Execution timeout.
kStatus_FLEXSPI_DeviceTimeout – the device timeout

status_t FLEXSPI_NorFlash_EraseBlock(uint32_t instance, flexspi_nor_config_t *config, uint32_t address)

Erase one block specified by address.

This function erases one block of NOR flash based on the desired address.

Parameters:

instance – storage the index of FLEXSPI.
config – A pointer to the storage for the driver runtime state.
address – The start address of the desired NOR flash memory to be erased. NOTE: It is recommended that use block-aligned access nor device; If dstAddr is not aligned with the block,The driver automatically aligns address down with the block address.

Return values:

kStatus_Success – Api was executed succesfuly.
kStatus_InvalidArgument – A invalid argument is provided.
kStatus_FLEXSPI_InvalidSequence – A invalid Sequence is provided.
kStatus_FLEXSPI_SequenceExecutionTimeout – Sequence Execution timeout.
kStatus_FLEXSPI_DeviceTimeout – the device timeout

status_t FLEXSPI_NorFlash_GetConfig(uint32_t instance, flexspi_nor_config_t *config, serial_nor_config_option_t *option)

Get FLEXSPI NOR Configuration Block based on specified option.

Parameters:

instance – storage the instance of FLEXSPI.
config – A pointer to the storage for the driver runtime state.
option – A pointer to the storage Serial NOR Configuration Option Context.

Return values:

kStatus_Success – Api was executed succesfuly.
kStatus_InvalidArgument – A invalid argument is provided.
kStatus_FLEXSPI_InvalidSequence – A invalid Sequence is provided.
kStatus_FLEXSPI_SequenceExecutionTimeout – Sequence Execution timeout.
kStatus_FLEXSPI_DeviceTimeout – the device timeout

status_t FLEXSPI_NorFlash_Erase(uint32_t instance, flexspi_nor_config_t *config, uint32_t start, uint32_t length)

Erase Flash Region specified by address and length.

This function erases the appropriate number of flash sectors based on the desired start address and length.

Parameters:

instance – storage the index of FLEXSPI.
config – A pointer to the storage for the driver runtime state.
start – The start address of the desired NOR flash memory to be erased. NOTE: It is recommended that use sector-aligned access nor device; If dstAddr is not aligned with the sector,the driver automatically aligns address down with the sector address.
length – The length, given in bytes to be erased. NOTE: It is recommended that use sector-aligned access nor device; If length is not aligned with the sector,the driver automatically aligns up with the sector.

Return values:

kStatus_Success – Api was executed succesfuly.
kStatus_InvalidArgument – A invalid argument is provided.
kStatus_FLEXSPI_InvalidSequence – A invalid Sequence is provided.
kStatus_FLEXSPI_SequenceExecutionTimeout – Sequence Execution timeout.
kStatus_FLEXSPI_DeviceTimeout – the device timeout

status_t FLEXSPI_NorFlash_Read(uint32_t instance, flexspi_nor_config_t *config, uint32_t *dst, uint32_t start, uint32_t bytes)

Read data from Serial NOR via FLEXSPI.

This function read the NOR flash memory with the start address for a given flash area as determined by the dst address and the length.

Parameters:

instance – storage the instance of FLEXSPI.
config – A pointer to the storage for the driver runtime state.
dst – A pointer to the dest buffer of data that is to be read from the NOR flash. NOTE: It is recommended that use page aligned access; If the dstAddr is not aligned to page,the driver automatically aligns address down with the page address.
start – The start address of the desired NOR flash memory to be read.
bytes – The length, given in bytes to be read.

Return values:

kStatus_Success – Api was executed succesfuly.
kStatus_InvalidArgument – A invalid argument is provided.
kStatus_FLEXSPI_InvalidSequence – A invalid Sequence is provided.
kStatus_FLEXSPI_SequenceExecutionTimeout – Sequence Execution timeout.
kStatus_FLEXSPI_DeviceTimeout – the device timeout

status_t FLEXSPI_NorFlash_CommandXfer(uint32_t instance, flexspi_xfer_t *xfer)

FLEXSPI command.

This function is used to perform the command write sequence to the NOR device.

Parameters:

instance – storage the index of FLEXSPI.
xfer – A pointer to the storage FLEXSPI Transfer Context.

Return values:

kStatus_Success – Api was executed succesfuly.
kStatus_InvalidArgument – A invalid argument is provided.
kStatus_ROM_FLEXSPI_InvalidSequence – A invalid Sequence is provided.
kStatus_ROM_FLEXSPI_SequenceExecutionTimeout – Sequence Execution timeout.

status_t FLEXSPI_NorFlash_UpdateLut(uint32_t instance, uint32_t seqIndex, const uint32_t *lutBase, uint32_t numberOfSeq)

Configure FLEXSPI Lookup table.

Parameters:

instance – storage the index of FLEXSPI.
seqIndex – storage the sequence Id.
lutBase – A pointer to the look-up-table for command sequences.
numberOfSeq – storage sequence number.

Return values:

kStatus_Success – Api was executed succesfuly.
kStatus_InvalidArgument – A invalid argument is provided.
kStatus_ROM_FLEXSPI_InvalidSequence – A invalid Sequence is provided.
kStatus_ROM_FLEXSPI_SequenceExecutionTimeout – Sequence Execution timeout.

status_t FLEXSPI_NorFlash_SetClockSource(uint32_t clockSource)

Set the clock source for FLEXSPI NOR.

Parameters:

clockSource – Clock source for FLEXSPI NOR. See to “_flexspi_nor_clock_source”.

Return values:

kStatus_Success – Api was executed succesfuly.
kStatus_InvalidArgument – A invalid argument is provided.

void FLEXSPI_NorFlash_ConfigClock(uint32_t instance, uint32_t freqOption, uint32_t sampleClkMode)

config flexspi clock

Parameters:

instance – storage the index of FLEXSPI.
freqOption – pointer to FlexSPIFlexSPI flash serial clock frequency.
sampleClkMode – pointer to configure the FlexSPI clock configuration type.

status_t FLEXSPI_NorFlash_PartialProgram(uint32_t instance, flexspi_nor_config_t *config, uint32_t dstAddr, const uint32_t *src, uint32_t length)

Partial program data to FlexSPI NOR flash.

Parameters:

instance – storage the index of FLEXSPI.
config – A pointer to the storage for the driver runtime state.
dstAddr – A pointer to the desired flash memory to be programmed.
src – A pointer to the source buffer of data that is to be programmed into the NOR flash.
length – The length, given in bytes (not words or long-words) to be programmed.

Return values:

kStatus_Success – Api was executed succesfuly.
kStatus_InvalidArgument – A invalid argument is provided.
kStatus_ROM_FLEXSPI_InvalidSequence – A invalid Sequence is provided.
kStatus_ROM_FLEXSPI_SequenceExecutionTimeout – Sequence Execution timeout.

FLEXSPI_FEATURE_HAS_PARALLEL_MODE: FLEXSPI Feature related definitions

FSL_ROM_FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1)

CMD_SDR

CMD_DDR

RADDR_SDR

RADDR_DDR

CADDR_SDR

CADDR_DDR

MODE1_SDR

MODE1_DDR

MODE2_SDR

MODE2_DDR

MODE4_SDR

MODE4_DDR

MODE8_SDR

MODE8_DDR

WRITE_SDR

WRITE_DDR

READ_SDR

READ_DDR

LEARN_SDR

LEARN_DDR

DATSZ_SDR

DATSZ_DDR

DUMMY_SDR

DUMMY_DDR

DUMMY_RWDS_SDR

DUMMY_RWDS_DDR

JMP_ON_CS

FLEXSPI_STOP

FLEXSPI_1PAD

FLEXSPI_2PAD

FLEXSPI_4PAD

FLEXSPI_8PAD

NOR_CMD_LUT_SEQ_IDX_READ

NOR LUT sequence index used for default LUT assignment NOTE: The will take effect if the lut sequences are not customized.

READ LUT sequence id in lookupTable stored in config block

NOR_CMD_LUT_SEQ_IDX_READSTATUS: Read Status LUT sequence id in lookupTable stored in config block

NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI: Read status DPI/QPI/OPI sequence id in lookupTable stored in config block

NOR_CMD_LUT_SEQ_IDX_WRITEENABLE: Write Enable sequence id in lookupTable stored in config block

NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI: Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block

NOR_CMD_LUT_SEQ_IDX_ERASESECTOR: Erase Sector sequence id in lookupTable stored in config block

NOR_CMD_LUT_SEQ_IDX_READID

NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK: Erase Block sequence id in lookupTable stored in config block

NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM: Program sequence id in lookupTable stored in config block

NOR_CMD_LUT_SEQ_IDX_CHIPERASE: Chip Erase sequence in lookupTable id stored in config block

NOR_CMD_LUT_SEQ_IDX_READ_SFDP: Read SFDP sequence in lookupTable id stored in config block

NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD: Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block

NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD: Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk

kROM_StatusGroup_LPSPI: ROM Group number for LPSPI status codes.

struct _flash_ecc_log: #include <fsl_flash.h>

Flash ECC log info.

struct _flash_mode_config: #include <fsl_flash.h>

Flash controller paramter config.

struct _flash_ffr_config: #include <fsl_flash.h>

Flash controller paramter config.

union StandardVersion

#include <fsl_flash.h>

Structure of version property.

Public Members

struct StandardVersion

uint32_t version: combined version numbers

struct flash_config_t

#include <fsl_flash.h>

Flash driver state information.

An instance of this structure is allocated by the user of the flash driver and passed into each of the driver APIs.

Public Members

uint32_t PFlashBlockBase: A base address of the first PFlash block

uint32_t PFlashTotalSize: The size of the combined PFlash block.

uint32_t PFlashBlockCount: A number of PFlash blocks.

uint32_t PFlashPageSize: The size in bytes of a page of PFlash.

uint32_t PFlashSectorSize: The size in bytes of a sector of PFlash.

struct _serial_nor_config_option: #include <fsl_flexspi_nor_flash.h>

Serial NOR configuration option.

union flash_run_context_t

Public Members

struct flash_run_context_t B

uint32_t U

struct _lut_sequence

#include <fsl_flexspi_nor_flash.h>

FLEXSPI LUT Sequence structure.

Public Members

uint8_t seqNum: Sequence Number, valid number: 1-16

uint8_t seqId: Sequence Index, valid number: 0-15

struct flexspi_dll_time_t

Public Members

uint8_t time_100ps: Data valid time, in terms of 100ps

uint8_t delay_cells: Data valid time, in terms of delay cells

struct _FlexSPIConfig

#include <fsl_flexspi_nor_flash.h>

FLEXSPI Memory Configuration Block.

Public Members

uint32_t tag: [0x000-0x003] Tag, fixed value 0x42464346UL

uint32_t version: [0x004-0x007] Version,[31:24] -‘V’, [23:16] - Major, [15:8] - Minor, [7:0] - bugfix

uint32_t reserved0: [0x008-0x00b] Reserved for future use

uint8_t readSampleClkSrc: [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3

uint8_t csHoldTime: [0x00d-0x00d] CS hold time, default value: 3

uint8_t csSetupTime: [0x00e-0x00e] CS setup time, default value: 3

uint8_t columnAddressWidth: [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet

uint8_t deviceModeCfgEnable: [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable

uint8_t deviceModeType: [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.

uint16_t waitTimeCfgCommands: [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command

flexspi_lut_seq_t deviceModeSeq: [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt sequence number, [31:16] Reserved

uint32_t deviceModeArg: [0x018-0x01b] Argument/Parameter for device configuration

uint8_t configCmdEnable: [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable

uint8_t configModeType[3]: [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe

flexspi_lut_seq_t configCmdSeqs[3]: [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq

uint32_t reserved1: [0x02c-0x02f] Reserved for future use

uint32_t configCmdArgs[3]: [0x030-0x03b] Arguments/Parameters for device Configuration commands

uint32_t reserved2: [0x03c-0x03f] Reserved for future use

uint32_t controllerMiscOption: [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details

uint8_t deviceType: [0x044-0x044] Device Type: See Flash Type Definition for more details

uint8_t sflashPadType: [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal

uint8_t serialClkFreq: [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details

uint8_t lutCustomSeqEnable: [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH

uint32_t reserved3[2]: [0x048-0x04f] Reserved for future use

uint32_t sflashA1Size: [0x050-0x053] Size of Flash connected to A1

uint32_t sflashA2Size: [0x054-0x057] Size of Flash connected to A2

uint32_t sflashB1Size: [0x058-0x05b] Size of Flash connected to B1

uint32_t sflashB2Size: [0x05c-0x05f] Size of Flash connected to B2

uint32_t csPadSettingOverride: [0x060-0x063] CS pad setting override value

uint32_t sclkPadSettingOverride: [0x064-0x067] SCK pad setting override value

uint32_t dataPadSettingOverride: [0x068-0x06b] data pad setting override value

uint32_t dqsPadSettingOverride: [0x06c-0x06f] DQS pad setting override value

uint32_t timeoutInMs: [0x070-0x073] Timeout threshold for read status command

uint32_t commandInterval: [0x074-0x077] CS deselect interval between two commands

flexspi_dll_time_t dataValidTime[2]: [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B

uint16_t busyOffset: [0x07c-0x07d] Busy offset, valid value: 0-31

uint16_t busyBitPolarity: [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy

uint32_t lookupTable[64]: [0x080-0x17f] Lookup table holds Flash command sequences

flexspi_lut_seq_t lutCustomSeq[12]: [0x180-0x1af] Customizable LUT Sequences

uint32_t dll0CrVal: [0x1b0-0x1b3] Customizable DLL0CR setting

uint32_t dll1CrVal: [0x1b4-0x1b7] Customizable DLL1CR setting

uint32_t reserved4[2]: [0x1b8-0x1bf] Reserved for future use

struct _flexspi_nor_config

#include <fsl_flexspi_nor_flash.h>

Serial NOR configuration block.

Public Members

flexspi_mem_config_t memConfig: Common memory configuration info via FLEXSPI

uint32_t pageSize: Page size of Serial NOR

uint32_t sectorSize: Sector size of Serial NOR

uint8_t ipcmdSerialClkFreq: Clock frequency for IP command

uint8_t isUniformBlockSize: Sector/Block size is the same

uint8_t isDataOrderSwapped: Data order (D0, D1, D2, D3) is swapped (D1,D0, D3, D2)

uint8_t reserved0[1]: Reserved for future use

uint8_t serialNorType: Serial NOR Flash type: 0/1/2/3

uint8_t needExitNoCmdMode: Need to exit NoCmd mode before other IP command

uint8_t halfClkForNonReadCmd: Half the Serial Clock for non-read command: true/false

uint8_t needRestoreNoCmdMode: Need to Restore NoCmd mode after IP commmand execution

uint32_t blockSize: Block size

uint32_t flashStateCtx: Flash State Context

uint32_t reserve2[10]: Reserved for future use

struct _flexspi_xfer

#include <fsl_flexspi_nor_flash.h>

FLEXSPI Transfer Context.

Public Members

flexspi_operation_t operation: FLEXSPI operation

uint32_t baseAddress: FLEXSPI operation base address

uint32_t seqId: Sequence Id

uint32_t seqNum: Sequence Number

bool isParallelModeEnable: Is a parallel transfer

uint32_t *txBuffer: Tx buffer

uint32_t txSize: Tx size in bytes

uint32_t *rxBuffer: Rx buffer

uint32_t rxSize: Rx size in bytes

struct readSingleWord

struct setWriteMode

struct setReadMode

struct __unnamed5__

Public Members

uint8_t bugfix: bugfix version [7:0]

uint8_t minor: minor version [15:8]

uint8_t major: major version [23:16]

char name: name [31:24]

union option0

Public Members

struct _serial_nor_config_option B

uint32_t U

struct B

Public Members

uint32_t max_freq: Maximum supported Frequency

uint32_t misc_mode: miscellaneous mode

uint32_t quad_mode_setting: Quad mode setting

uint32_t cmd_pads: Command pads

uint32_t query_pads: SFDP read pads

uint32_t device_type: Device type

uint32_t option_size: Option size, in terms of uint32_t, size = (option_size + 1) * 4

uint32_t tag: Tag, must be 0x0E

union option1

Public Members

struct _serial_nor_config_option B

uint32_t U

struct B

Public Members

uint32_t dummy_cycles: Dummy cycles before read

uint32_t status_override: Override status register value during device mode configuration

uint32_t pinmux_group: The pinmux group selection

uint32_t dqs_pinmux_group: The DQS Pinmux Group Selection

uint32_t drive_strength: The Drive Strength of FLEXSPI Pads

uint32_t flash_connection: Flash connection option: 0 - Single Flash connected to port A, 1 - Parallel mode, 2 - Single Flash connected to Port B

struct B

FlexIO: FlexIO Driver#

FlexIO Driver#

void FLEXIO_GetDefaultConfig(flexio_config_t *userConfig)

Gets the default configuration to configure the FlexIO module. The configuration can used directly to call the FLEXIO_Configure().

Example:

flexio_config_t config;
FLEXIO_GetDefaultConfig(&config);

Parameters:

userConfig – pointer to flexio_config_t structure

void FLEXIO_Init(FLEXIO_Type *base, const flexio_config_t *userConfig)

Configures the FlexIO with a FlexIO configuration. The configuration structure can be filled by the user or be set with default values by FLEXIO_GetDefaultConfig().

Example

flexio_config_t config = {
.enableFlexio = true,
.enableInDoze = false,
.enableInDebug = true,
.enableFastAccess = false
};
FLEXIO_Configure(base, &config);

Parameters:

base – FlexIO peripheral base address
userConfig – pointer to flexio_config_t structure

void FLEXIO_Deinit(FLEXIO_Type *base)

Gates the FlexIO clock. Call this API to stop the FlexIO clock.

Note

After calling this API, call the FLEXO_Init to use the FlexIO module.

Parameters:

base – FlexIO peripheral base address

uint32_t FLEXIO_GetInstance(FLEXIO_Type *base)

Get instance number for FLEXIO module.

Parameters:

base – FLEXIO peripheral base address.

void FLEXIO_Reset(FLEXIO_Type *base)

Resets the FlexIO module.

Parameters:

base – FlexIO peripheral base address

static inline void FLEXIO_Enable(FLEXIO_Type *base, bool enable)

Enables the FlexIO module operation.

Parameters:

base – FlexIO peripheral base address
enable – true to enable, false to disable.

static inline uint32_t FLEXIO_ReadPinInput(FLEXIO_Type *base)

Reads the input data on each of the FlexIO pins.

Parameters:

base – FlexIO peripheral base address

Returns:

FlexIO pin input data

static inline uint8_t FLEXIO_GetShifterState(FLEXIO_Type *base)

Gets the current state pointer for state mode use.

Parameters:

base – FlexIO peripheral base address

Returns:

current State pointer

void FLEXIO_SetShifterConfig(FLEXIO_Type *base, uint8_t index, const flexio_shifter_config_t *shifterConfig)

Configures the shifter with the shifter configuration. The configuration structure covers both the SHIFTCTL and SHIFTCFG registers. To configure the shifter to the proper mode, select which timer controls the shifter to shift, whether to generate start bit/stop bit, and the polarity of start bit and stop bit.

Example

flexio_shifter_config_t config = {
.timerSelect = 0,
.timerPolarity = kFLEXIO_ShifterTimerPolarityOnPositive,
.pinConfig = kFLEXIO_PinConfigOpenDrainOrBidirection,
.pinPolarity = kFLEXIO_PinActiveLow,
.shifterMode = kFLEXIO_ShifterModeTransmit,
.inputSource = kFLEXIO_ShifterInputFromPin,
.shifterStop = kFLEXIO_ShifterStopBitHigh,
.shifterStart = kFLEXIO_ShifterStartBitLow
};
FLEXIO_SetShifterConfig(base, &config);

Parameters:

base – FlexIO peripheral base address
index – Shifter index
shifterConfig – Pointer to flexio_shifter_config_t structure

void FLEXIO_SetTimerConfig(FLEXIO_Type *base, uint8_t index, const flexio_timer_config_t *timerConfig)

Configures the timer with the timer configuration. The configuration structure covers both the TIMCTL and TIMCFG registers. To configure the timer to the proper mode, select trigger source for timer and the timer pin output and the timing for timer.

Example

flexio_timer_config_t config = {
.triggerSelect = FLEXIO_TIMER_TRIGGER_SEL_SHIFTnSTAT(0),
.triggerPolarity = kFLEXIO_TimerTriggerPolarityActiveLow,
.triggerSource = kFLEXIO_TimerTriggerSourceInternal,
.pinConfig = kFLEXIO_PinConfigOpenDrainOrBidirection,
.pinSelect = 0,
.pinPolarity = kFLEXIO_PinActiveHigh,
.timerMode = kFLEXIO_TimerModeDual8BitBaudBit,
.timerOutput = kFLEXIO_TimerOutputZeroNotAffectedByReset,
.timerDecrement = kFLEXIO_TimerDecSrcOnFlexIOClockShiftTimerOutput,
.timerReset = kFLEXIO_TimerResetOnTimerPinEqualToTimerOutput,
.timerDisable = kFLEXIO_TimerDisableOnTimerCompare,
.timerEnable = kFLEXIO_TimerEnableOnTriggerHigh,
.timerStop = kFLEXIO_TimerStopBitEnableOnTimerDisable,
.timerStart = kFLEXIO_TimerStartBitEnabled
};
FLEXIO_SetTimerConfig(base, &config);

Parameters:

base – FlexIO peripheral base address
index – Timer index
timerConfig – Pointer to the flexio_timer_config_t structure

static inline void FLEXIO_SetClockMode(FLEXIO_Type *base, uint8_t index, flexio_timer_decrement_source_t clocksource)

This function set the value of the prescaler on flexio channels.

Parameters:

base – Pointer to the FlexIO simulated peripheral type.
index – Timer index
clocksource – Set clock value

static inline void FLEXIO_EnableShifterStatusInterrupts(FLEXIO_Type *base, uint32_t mask)

Enables the shifter status interrupt. The interrupt generates when the corresponding SSF is set.

Note

For multiple shifter status interrupt enable, for example, two shifter status enable, can calculate the mask by using ((1 << shifter index0) | (1 << shifter index1))

Parameters:

base – FlexIO peripheral base address
mask – The shifter status mask which can be calculated by (1 << shifter index)

static inline void FLEXIO_DisableShifterStatusInterrupts(FLEXIO_Type *base, uint32_t mask)

Disables the shifter status interrupt. The interrupt won’t generate when the corresponding SSF is set.

Note

For multiple shifter status interrupt enable, for example, two shifter status enable, can calculate the mask by using ((1 << shifter index0) | (1 << shifter index1))

Parameters:

base – FlexIO peripheral base address
mask – The shifter status mask which can be calculated by (1 << shifter index)

static inline void FLEXIO_EnableShifterErrorInterrupts(FLEXIO_Type *base, uint32_t mask)

Enables the shifter error interrupt. The interrupt generates when the corresponding SEF is set.

Note

For multiple shifter error interrupt enable, for example, two shifter error enable, can calculate the mask by using ((1 << shifter index0) | (1 << shifter index1))

Parameters:

base – FlexIO peripheral base address
mask – The shifter error mask which can be calculated by (1 << shifter index)

static inline void FLEXIO_DisableShifterErrorInterrupts(FLEXIO_Type *base, uint32_t mask)

Disables the shifter error interrupt. The interrupt won’t generate when the corresponding SEF is set.

Note

For multiple shifter error interrupt enable, for example, two shifter error enable, can calculate the mask by using ((1 << shifter index0) | (1 << shifter index1))

Parameters:

base – FlexIO peripheral base address
mask – The shifter error mask which can be calculated by (1 << shifter index)

static inline void FLEXIO_EnableTimerStatusInterrupts(FLEXIO_Type *base, uint32_t mask)

Enables the timer status interrupt. The interrupt generates when the corresponding SSF is set.

Note

For multiple timer status interrupt enable, for example, two timer status enable, can calculate the mask by using ((1 << timer index0) | (1 << timer index1))

Parameters:

base – FlexIO peripheral base address
mask – The timer status mask which can be calculated by (1 << timer index)

static inline void FLEXIO_DisableTimerStatusInterrupts(FLEXIO_Type *base, uint32_t mask)

Disables the timer status interrupt. The interrupt won’t generate when the corresponding SSF is set.

Note

For multiple timer status interrupt enable, for example, two timer status enable, can calculate the mask by using ((1 << timer index0) | (1 << timer index1))

Parameters:

base – FlexIO peripheral base address
mask – The timer status mask which can be calculated by (1 << timer index)

static inline uint32_t FLEXIO_GetShifterStatusFlags(FLEXIO_Type *base)

Gets the shifter status flags.

Parameters:

base – FlexIO peripheral base address

Returns:

Shifter status flags

static inline void FLEXIO_ClearShifterStatusFlags(FLEXIO_Type *base, uint32_t mask)

Clears the shifter status flags.

Note

For clearing multiple shifter status flags, for example, two shifter status flags, can calculate the mask by using ((1 << shifter index0) | (1 << shifter index1))

Parameters:

base – FlexIO peripheral base address
mask – The shifter status mask which can be calculated by (1 << shifter index)

static inline uint32_t FLEXIO_GetShifterErrorFlags(FLEXIO_Type *base)

Gets the shifter error flags.

Parameters:

base – FlexIO peripheral base address

Returns:

Shifter error flags

static inline void FLEXIO_ClearShifterErrorFlags(FLEXIO_Type *base, uint32_t mask)

Clears the shifter error flags.

Note

For clearing multiple shifter error flags, for example, two shifter error flags, can calculate the mask by using ((1 << shifter index0) | (1 << shifter index1))

Parameters:

base – FlexIO peripheral base address
mask – The shifter error mask which can be calculated by (1 << shifter index)

static inline uint32_t FLEXIO_GetTimerStatusFlags(FLEXIO_Type *base)

Gets the timer status flags.

Parameters:

base – FlexIO peripheral base address

Returns:

Timer status flags

static inline void FLEXIO_ClearTimerStatusFlags(FLEXIO_Type *base, uint32_t mask)

Clears the timer status flags.

Note

For clearing multiple timer status flags, for example, two timer status flags, can calculate the mask by using ((1 << timer index0) | (1 << timer index1))

Parameters:

base – FlexIO peripheral base address
mask – The timer status mask which can be calculated by (1 << timer index)

static inline void FLEXIO_EnableShifterStatusDMA(FLEXIO_Type *base, uint32_t mask, bool enable)

Enables/disables the shifter status DMA. The DMA request generates when the corresponding SSF is set.

Note

For multiple shifter status DMA enables, for example, calculate the mask by using ((1 << shifter index0) | (1 << shifter index1))

Parameters:

base – FlexIO peripheral base address
mask – The shifter status mask which can be calculated by (1 << shifter index)
enable – True to enable, false to disable.

uint32_t FLEXIO_GetShifterBufferAddress(FLEXIO_Type *base, flexio_shifter_buffer_type_t type, uint8_t index)

Gets the shifter buffer address for the DMA transfer usage.

Parameters:

base – FlexIO peripheral base address
type – Shifter type of flexio_shifter_buffer_type_t
index – Shifter index

Returns:

Corresponding shifter buffer index

status_t FLEXIO_RegisterHandleIRQ(void *base, void *handle, flexio_isr_t isr)

Registers the handle and the interrupt handler for the FlexIO-simulated peripheral.

Parameters:

base – Pointer to the FlexIO simulated peripheral type.
handle – Pointer to the handler for FlexIO simulated peripheral.
isr – FlexIO simulated peripheral interrupt handler.

Return values:

kStatus_Success – Successfully create the handle.
kStatus_OutOfRange – The FlexIO type/handle/ISR table out of range.

status_t FLEXIO_UnregisterHandleIRQ(void *base)

Unregisters the handle and the interrupt handler for the FlexIO-simulated peripheral.

Parameters:

base – Pointer to the FlexIO simulated peripheral type.

Return values:

kStatus_Success – Successfully create the handle.
kStatus_OutOfRange – The FlexIO type/handle/ISR table out of range.

static inline void FLEXIO_ClearPortOutput(FLEXIO_Type *base, uint32_t mask)

Sets the output level of the multiple FLEXIO pins to the logic 0.

Parameters:

base – FlexIO peripheral base address
mask – FLEXIO pin number mask

static inline void FLEXIO_SetPortOutput(FLEXIO_Type *base, uint32_t mask)

Sets the output level of the multiple FLEXIO pins to the logic 1.

Parameters:

base – FlexIO peripheral base address
mask – FLEXIO pin number mask

static inline void FLEXIO_TogglePortOutput(FLEXIO_Type *base, uint32_t mask)

Reverses the current output logic of the multiple FLEXIO pins.

Parameters:

base – FlexIO peripheral base address
mask – FLEXIO pin number mask

static inline void FLEXIO_PinWrite(FLEXIO_Type *base, uint32_t pin, uint8_t output)

Sets the output level of the FLEXIO pins to the logic 1 or 0.

Parameters:

base – FlexIO peripheral base address
pin – FLEXIO pin number.
output – FLEXIO pin output logic level.
- 0: corresponding pin output low-logic level.
- 1: corresponding pin output high-logic level.

static inline void FLEXIO_EnablePinOutput(FLEXIO_Type *base, uint32_t pin)

Enables the FLEXIO output pin function.

Parameters:

base – FlexIO peripheral base address
pin – FLEXIO pin number.

static inline uint32_t FLEXIO_PinRead(FLEXIO_Type *base, uint32_t pin)

Reads the current input value of the FLEXIO pin.

Parameters:

base – FlexIO peripheral base address
pin – FLEXIO pin number.

Return values:

FLEXIO – port input value

0: corresponding pin input low-logic level.
1: corresponding pin input high-logic level.

static inline uint32_t FLEXIO_GetPinStatus(FLEXIO_Type *base, uint32_t pin)

Gets the FLEXIO input pin status.

Parameters:

base – FlexIO peripheral base address
pin – FLEXIO pin number.

Return values:

FLEXIO – port input status

0: corresponding pin input capture no status.
1: corresponding pin input capture rising or falling edge.

static inline void FLEXIO_SetPinLevel(FLEXIO_Type *base, uint8_t pin, bool level)

Sets the FLEXIO output pin level.

Parameters:

base – FlexIO peripheral base address
pin – FlexIO pin number.
level – FlexIO output pin level to set, can be either 0 or 1.

static inline bool FLEXIO_GetPinOverride(const FLEXIO_Type *const base, uint8_t pin)

Gets the enabled status of a FLEXIO output pin.

Parameters:

base – FlexIO peripheral base address
pin – FlexIO pin number.

Return values:

FlexIO – port enabled status

0: corresponding output pin is in disabled state.
1: corresponding output pin is in enabled state.

static inline void FLEXIO_ConfigPinOverride(FLEXIO_Type *base, uint8_t pin, bool enabled)

Enables or disables a FLEXIO output pin.

Parameters:

base – FlexIO peripheral base address
pin – Flexio pin number.
enabled – Enable or disable the FlexIO pin.

static inline void FLEXIO_ClearPortStatus(FLEXIO_Type *base, uint32_t mask)

Clears the multiple FLEXIO input pins status.

Parameters:

base – FlexIO peripheral base address
mask – FLEXIO pin number mask

FSL_FLEXIO_DRIVER_VERSION: FlexIO driver version.

enum _flexio_timer_trigger_polarity

Define time of timer trigger polarity.

Values:

enumerator kFLEXIO_TimerTriggerPolarityActiveHigh: Active high.

enumerator kFLEXIO_TimerTriggerPolarityActiveLow: Active low.

enum _flexio_timer_trigger_source

Define type of timer trigger source.

Values:

enumerator kFLEXIO_TimerTriggerSourceExternal: External trigger selected.

enumerator kFLEXIO_TimerTriggerSourceInternal: Internal trigger selected.

enum _flexio_pin_config

Define type of timer/shifter pin configuration.

Values:

enumerator kFLEXIO_PinConfigOutputDisabled: Pin output disabled.

enumerator kFLEXIO_PinConfigOpenDrainOrBidirection: Pin open drain or bidirectional output enable.

enumerator kFLEXIO_PinConfigBidirectionOutputData: Pin bidirectional output data.

enumerator kFLEXIO_PinConfigOutput: Pin output.

enum _flexio_pin_polarity

Definition of pin polarity.

Values:

enumerator kFLEXIO_PinActiveHigh: Active high.

enumerator kFLEXIO_PinActiveLow: Active low.

enum _flexio_timer_mode

Define type of timer work mode.

Values:

enumerator kFLEXIO_TimerModeDisabled: Timer Disabled.

enumerator kFLEXIO_TimerModeDual8BitBaudBit: Dual 8-bit counters baud/bit mode.

enumerator kFLEXIO_TimerModeDual8BitPWM: Dual 8-bit counters PWM mode.

enumerator kFLEXIO_TimerModeSingle16Bit: Single 16-bit counter mode.

enumerator kFLEXIO_TimerModeDual8BitPWMLow: Dual 8-bit counters PWM Low mode.

enum _flexio_timer_output

Define type of timer initial output or timer reset condition.

Values:

enumerator kFLEXIO_TimerOutputOneNotAffectedByReset: Logic one when enabled and is not affected by timer reset.

enumerator kFLEXIO_TimerOutputZeroNotAffectedByReset: Logic zero when enabled and is not affected by timer reset.

enumerator kFLEXIO_TimerOutputOneAffectedByReset: Logic one when enabled and on timer reset.

enumerator kFLEXIO_TimerOutputZeroAffectedByReset: Logic zero when enabled and on timer reset.

enum _flexio_timer_decrement_source

Define type of timer decrement.

Values:

enumerator kFLEXIO_TimerDecSrcOnFlexIOClockShiftTimerOutput: Decrement counter on FlexIO clock, Shift clock equals Timer output.

enumerator kFLEXIO_TimerDecSrcOnTriggerInputShiftTimerOutput: Decrement counter on Trigger input (both edges), Shift clock equals Timer output.

enumerator kFLEXIO_TimerDecSrcOnPinInputShiftPinInput: Decrement counter on Pin input (both edges), Shift clock equals Pin input.

enumerator kFLEXIO_TimerDecSrcOnTriggerInputShiftTriggerInput: Decrement counter on Trigger input (both edges), Shift clock equals Trigger input.

enum _flexio_timer_reset_condition

Define type of timer reset condition.

Values:

enumerator kFLEXIO_TimerResetNever: Timer never reset.

enumerator kFLEXIO_TimerResetOnTimerPinEqualToTimerOutput: Timer reset on Timer Pin equal to Timer Output.

enumerator kFLEXIO_TimerResetOnTimerTriggerEqualToTimerOutput: Timer reset on Timer Trigger equal to Timer Output.

enumerator kFLEXIO_TimerResetOnTimerPinRisingEdge: Timer reset on Timer Pin rising edge.

enumerator kFLEXIO_TimerResetOnTimerTriggerRisingEdge: Timer reset on Trigger rising edge.

enumerator kFLEXIO_TimerResetOnTimerTriggerBothEdge: Timer reset on Trigger rising or falling edge.

enum _flexio_timer_disable_condition

Define type of timer disable condition.

Values:

enumerator kFLEXIO_TimerDisableNever: Timer never disabled.

enumerator kFLEXIO_TimerDisableOnPreTimerDisable: Timer disabled on Timer N-1 disable.

enumerator kFLEXIO_TimerDisableOnTimerCompare: Timer disabled on Timer compare.

enumerator kFLEXIO_TimerDisableOnTimerCompareTriggerLow: Timer disabled on Timer compare and Trigger Low.

enumerator kFLEXIO_TimerDisableOnPinBothEdge: Timer disabled on Pin rising or falling edge.

enumerator kFLEXIO_TimerDisableOnPinBothEdgeTriggerHigh: Timer disabled on Pin rising or falling edge provided Trigger is high.

enumerator kFLEXIO_TimerDisableOnTriggerFallingEdge: Timer disabled on Trigger falling edge.

enum _flexio_timer_enable_condition

Define type of timer enable condition.

Values:

enumerator kFLEXIO_TimerEnabledAlways: Timer always enabled.

enumerator kFLEXIO_TimerEnableOnPrevTimerEnable: Timer enabled on Timer N-1 enable.

enumerator kFLEXIO_TimerEnableOnTriggerHigh: Timer enabled on Trigger high.

enumerator kFLEXIO_TimerEnableOnTriggerHighPinHigh: Timer enabled on Trigger high and Pin high.

enumerator kFLEXIO_TimerEnableOnPinRisingEdge: Timer enabled on Pin rising edge.

enumerator kFLEXIO_TimerEnableOnPinRisingEdgeTriggerHigh: Timer enabled on Pin rising edge and Trigger high.

enumerator kFLEXIO_TimerEnableOnTriggerRisingEdge: Timer enabled on Trigger rising edge.

enumerator kFLEXIO_TimerEnableOnTriggerBothEdge: Timer enabled on Trigger rising or falling edge.

enum _flexio_timer_stop_bit_condition

Define type of timer stop bit generate condition.

Values:

enumerator kFLEXIO_TimerStopBitDisabled: Stop bit disabled.

enumerator kFLEXIO_TimerStopBitEnableOnTimerCompare: Stop bit is enabled on timer compare.

enumerator kFLEXIO_TimerStopBitEnableOnTimerDisable: Stop bit is enabled on timer disable.

enumerator kFLEXIO_TimerStopBitEnableOnTimerCompareDisable: Stop bit is enabled on timer compare and timer disable.

enum _flexio_timer_start_bit_condition

Define type of timer start bit generate condition.

Values:

enumerator kFLEXIO_TimerStartBitDisabled: Start bit disabled.

enumerator kFLEXIO_TimerStartBitEnabled: Start bit enabled.

enum _flexio_timer_output_state

FlexIO as PWM channel output state.

Values:

enumerator kFLEXIO_PwmLow: The output state of PWM channel is low

enumerator kFLEXIO_PwmHigh: The output state of PWM channel is high

enum _flexio_shifter_timer_polarity

Define type of timer polarity for shifter control.

Values:

enumerator kFLEXIO_ShifterTimerPolarityOnPositive: Shift on positive edge of shift clock.

enumerator kFLEXIO_ShifterTimerPolarityOnNegitive: Shift on negative edge of shift clock.

enum _flexio_shifter_mode

Define type of shifter working mode.

Values:

enumerator kFLEXIO_ShifterDisabled: Shifter is disabled.

enumerator kFLEXIO_ShifterModeReceive: Receive mode.

enumerator kFLEXIO_ShifterModeTransmit: Transmit mode.

enumerator kFLEXIO_ShifterModeMatchStore: Match store mode.

enumerator kFLEXIO_ShifterModeMatchContinuous: Match continuous mode.

enumerator kFLEXIO_ShifterModeState: SHIFTBUF contents are used for storing programmable state attributes.

enumerator kFLEXIO_ShifterModeLogic: SHIFTBUF contents are used for implementing programmable logic look up table.

enum _flexio_shifter_input_source

Define type of shifter input source.

Values:

enumerator kFLEXIO_ShifterInputFromPin: Shifter input from pin.

enumerator kFLEXIO_ShifterInputFromNextShifterOutput: Shifter input from Shifter N+1.

enum _flexio_shifter_stop_bit

Define of STOP bit configuration.

Values:

enumerator kFLEXIO_ShifterStopBitDisable: Disable shifter stop bit.

enumerator kFLEXIO_ShifterStopBitLow: Set shifter stop bit to logic low level.

enumerator kFLEXIO_ShifterStopBitHigh: Set shifter stop bit to logic high level.

enum _flexio_shifter_start_bit

Define type of START bit configuration.

Values:

enumerator kFLEXIO_ShifterStartBitDisabledLoadDataOnEnable: Disable shifter start bit, transmitter loads data on enable.

enumerator kFLEXIO_ShifterStartBitDisabledLoadDataOnShift: Disable shifter start bit, transmitter loads data on first shift.

enumerator kFLEXIO_ShifterStartBitLow: Set shifter start bit to logic low level.

enumerator kFLEXIO_ShifterStartBitHigh: Set shifter start bit to logic high level.

enum _flexio_shifter_buffer_type

Define FlexIO shifter buffer type.

Values:

enumerator kFLEXIO_ShifterBuffer: Shifter Buffer N Register.

enumerator kFLEXIO_ShifterBufferBitSwapped: Shifter Buffer N Bit Byte Swapped Register.

enumerator kFLEXIO_ShifterBufferByteSwapped: Shifter Buffer N Byte Swapped Register.

enumerator kFLEXIO_ShifterBufferBitByteSwapped: Shifter Buffer N Bit Swapped Register.

enumerator kFLEXIO_ShifterBufferNibbleByteSwapped: Shifter Buffer N Nibble Byte Swapped Register.

enumerator kFLEXIO_ShifterBufferHalfWordSwapped: Shifter Buffer N Half Word Swapped Register.

enumerator kFLEXIO_ShifterBufferNibbleSwapped: Shifter Buffer N Nibble Swapped Register.

enum _flexio_gpio_direction

FLEXIO gpio direction definition.

Values:

enumerator kFLEXIO_DigitalInput: Set current pin as digital input

enumerator kFLEXIO_DigitalOutput: Set current pin as digital output

enum _flexio_pin_input_config

FLEXIO gpio input config.

Values:

enumerator kFLEXIO_InputInterruptDisabled: Interrupt request is disabled.

enumerator kFLEXIO_InputInterruptEnable: Interrupt request is enable.

enumerator kFLEXIO_FlagRisingEdgeEnable: Input pin flag on rising edge.

enumerator kFLEXIO_FlagFallingEdgeEnable: Input pin flag on falling edge.

typedef enum _flexio_timer_trigger_polarity flexio_timer_trigger_polarity_t: Define time of timer trigger polarity.

typedef enum _flexio_timer_trigger_source flexio_timer_trigger_source_t: Define type of timer trigger source.

typedef enum _flexio_pin_config flexio_pin_config_t: Define type of timer/shifter pin configuration.

typedef enum _flexio_pin_polarity flexio_pin_polarity_t: Definition of pin polarity.

typedef enum _flexio_timer_mode flexio_timer_mode_t: Define type of timer work mode.

typedef enum _flexio_timer_output flexio_timer_output_t: Define type of timer initial output or timer reset condition.

typedef enum _flexio_timer_decrement_source flexio_timer_decrement_source_t: Define type of timer decrement.

typedef enum _flexio_timer_reset_condition flexio_timer_reset_condition_t: Define type of timer reset condition.

typedef enum _flexio_timer_disable_condition flexio_timer_disable_condition_t: Define type of timer disable condition.

typedef enum _flexio_timer_enable_condition flexio_timer_enable_condition_t: Define type of timer enable condition.

typedef enum _flexio_timer_stop_bit_condition flexio_timer_stop_bit_condition_t: Define type of timer stop bit generate condition.

typedef enum _flexio_timer_start_bit_condition flexio_timer_start_bit_condition_t: Define type of timer start bit generate condition.

typedef enum _flexio_timer_output_state flexio_timer_output_state_t: FlexIO as PWM channel output state.

typedef enum _flexio_shifter_timer_polarity flexio_shifter_timer_polarity_t: Define type of timer polarity for shifter control.

typedef enum _flexio_shifter_mode flexio_shifter_mode_t: Define type of shifter working mode.

typedef enum _flexio_shifter_input_source flexio_shifter_input_source_t: Define type of shifter input source.

typedef enum _flexio_shifter_stop_bit flexio_shifter_stop_bit_t: Define of STOP bit configuration.

typedef enum _flexio_shifter_start_bit flexio_shifter_start_bit_t: Define type of START bit configuration.

typedef enum _flexio_shifter_buffer_type flexio_shifter_buffer_type_t: Define FlexIO shifter buffer type.

typedef struct _flexio_config_ flexio_config_t: Define FlexIO user configuration structure.

typedef struct _flexio_timer_config flexio_timer_config_t: Define FlexIO timer configuration structure.

typedef struct _flexio_shifter_config flexio_shifter_config_t: Define FlexIO shifter configuration structure.

typedef enum _flexio_gpio_direction flexio_gpio_direction_t: FLEXIO gpio direction definition.

typedef enum _flexio_pin_input_config flexio_pin_input_config_t: FLEXIO gpio input config.

typedef struct _flexio_gpio_config flexio_gpio_config_t

The FLEXIO pin configuration structure.

Each pin can only be configured as either an output pin or an input pin at a time. If configured as an input pin, use inputConfig param. If configured as an output pin, use outputLogic.

typedef void (*flexio_isr_t)(void *base, void *handle): typedef for FlexIO simulated driver interrupt handler.

FLEXIO_Type *const s_flexioBases[]: Pointers to flexio bases for each instance.

const clock_ip_name_t s_flexioClocks[]: Pointers to flexio clocks for each instance.

void FLEXIO_SetPinConfig(FLEXIO_Type *base, uint32_t pin, flexio_gpio_config_t *config)

Configure a FLEXIO pin used by the board.

To Config the FLEXIO PIN, define a pin configuration, as either input or output, in the user file. Then, call the FLEXIO_SetPinConfig() function.

This is an example to define an input pin or an output pin configuration.

Define a digital input pin configuration,
flexio_gpio_config_t config =
{
  kFLEXIO_DigitalInput,
  0U,
  kFLEXIO_FlagRisingEdgeEnable | kFLEXIO_InputInterruptEnable,
}
Define a digital output pin configuration,
flexio_gpio_config_t config =
{
  kFLEXIO_DigitalOutput,
  0U,
  0U
}

Parameters:

base – FlexIO peripheral base address
pin – FLEXIO pin number.
config – FLEXIO pin configuration pointer.

FLEXIO_TIMER_TRIGGER_SEL_PININPUT(x): Calculate FlexIO timer trigger.

FLEXIO_TIMER_TRIGGER_SEL_SHIFTnSTAT(x)

FLEXIO_TIMER_TRIGGER_SEL_TIMn(x)

struct _flexio_config_

#include <fsl_flexio.h>

Define FlexIO user configuration structure.

Public Members

bool enableFlexio: Enable/disable FlexIO module

bool enableInDoze: Enable/disable FlexIO operation in doze mode

bool enableInDebug: Enable/disable FlexIO operation in debug mode

bool enableFastAccess: Enable/disable fast access to FlexIO registers, fast access requires the FlexIO clock to be at least twice the frequency of the bus clock.

struct _flexio_timer_config

#include <fsl_flexio.h>

Define FlexIO timer configuration structure.

Public Members

uint32_t triggerSelect: The internal trigger selection number using MACROs.

flexio_timer_trigger_polarity_t triggerPolarity: Trigger Polarity.

flexio_timer_trigger_source_t triggerSource: Trigger Source, internal (see ‘trgsel’) or external.

flexio_pin_config_t pinConfig: Timer Pin Configuration.

uint32_t pinSelect: Timer Pin number Select.

flexio_pin_polarity_t pinPolarity: Timer Pin Polarity.

flexio_timer_mode_t timerMode: Timer work Mode.

flexio_timer_output_t timerOutput: Configures the initial state of the Timer Output and whether it is affected by the Timer reset.

flexio_timer_decrement_source_t timerDecrement: Configures the source of the Timer decrement and the source of the Shift clock.

flexio_timer_reset_condition_t timerReset: Configures the condition that causes the timer counter (and optionally the timer output) to be reset.

flexio_timer_disable_condition_t timerDisable: Configures the condition that causes the Timer to be disabled and stop decrementing.

flexio_timer_enable_condition_t timerEnable: Configures the condition that causes the Timer to be enabled and start decrementing.

flexio_timer_stop_bit_condition_t timerStop: Timer STOP Bit generation.

flexio_timer_start_bit_condition_t timerStart: Timer STRAT Bit generation.

uint32_t timerCompare: Value for Timer Compare N Register.

struct _flexio_shifter_config

#include <fsl_flexio.h>

Define FlexIO shifter configuration structure.

Public Members

uint32_t timerSelect: Selects which Timer is used for controlling the logic/shift register and generating the Shift clock.

flexio_shifter_timer_polarity_t timerPolarity: Timer Polarity.

flexio_pin_config_t pinConfig: Shifter Pin Configuration.

uint32_t pinSelect: Shifter Pin number Select.

flexio_pin_polarity_t pinPolarity: Shifter Pin Polarity.

flexio_shifter_mode_t shifterMode: Configures the mode of the Shifter.

uint32_t parallelWidth: Configures the parallel width when using parallel mode.

flexio_shifter_input_source_t inputSource: Selects the input source for the shifter.

flexio_shifter_stop_bit_t shifterStop: Shifter STOP bit.

flexio_shifter_start_bit_t shifterStart: Shifter START bit.

struct _flexio_gpio_config

#include <fsl_flexio.h>

The FLEXIO pin configuration structure.

Each pin can only be configured as either an output pin or an input pin at a time. If configured as an input pin, use inputConfig param. If configured as an output pin, use outputLogic.

Public Members

flexio_gpio_direction_t pinDirection: FLEXIO pin direction, input or output

uint8_t outputLogic: Set a default output logic, which has no use in input

uint8_t inputConfig: Set an input config

FlexIO eDMA I2S Driver#

void FLEXIO_I2S_TransferTxCreateHandleEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle, flexio_i2s_edma_callback_t callback, void *userData, edma_handle_t *dmaHandle)

Initializes the FlexIO I2S eDMA handle.

This function initializes the FlexIO I2S master DMA handle which can be used for other FlexIO I2S master transactional APIs. Usually, for a specified FlexIO I2S instance, call this API once to get the initialized handle.

Parameters:

base – FlexIO I2S peripheral base address.
handle – FlexIO I2S eDMA handle pointer.
callback – FlexIO I2S eDMA callback function called while finished a block.
userData – User parameter for callback.
dmaHandle – eDMA handle for FlexIO I2S. This handle is a static value allocated by users.

void FLEXIO_I2S_TransferRxCreateHandleEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle, flexio_i2s_edma_callback_t callback, void *userData, edma_handle_t *dmaHandle)

Initializes the FlexIO I2S Rx eDMA handle.

This function initializes the FlexIO I2S slave DMA handle which can be used for other FlexIO I2S master transactional APIs. Usually, for a specified FlexIO I2S instance, call this API once to get the initialized handle.

Parameters:

base – FlexIO I2S peripheral base address.
handle – FlexIO I2S eDMA handle pointer.
callback – FlexIO I2S eDMA callback function called while finished a block.
userData – User parameter for callback.
dmaHandle – eDMA handle for FlexIO I2S. This handle is a static value allocated by users.

void FLEXIO_I2S_TransferSetFormatEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle, flexio_i2s_format_t *format, uint32_t srcClock_Hz)

Configures the FlexIO I2S Tx audio format.

Audio format can be changed in run-time of FlexIO I2S. This function configures the sample rate and audio data format to be transferred. This function also sets the eDMA parameter according to format.

Parameters:

base – FlexIO I2S peripheral base address.
handle – FlexIO I2S eDMA handle pointer
format – Pointer to FlexIO I2S audio data format structure.
srcClock_Hz – FlexIO I2S clock source frequency in Hz, it should be 0 while in slave mode.

status_t FLEXIO_I2S_TransferSendEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle, flexio_i2s_transfer_t *xfer)

Performs a non-blocking FlexIO I2S transfer using DMA.

Note

This interface returned immediately after transfer initiates. Users should call FLEXIO_I2S_GetTransferStatus to poll the transfer status and check whether the FlexIO I2S transfer is finished.

Parameters:

base – FlexIO I2S peripheral base address.
handle – FlexIO I2S DMA handle pointer.
xfer – Pointer to DMA transfer structure.

Return values:

kStatus_Success – Start a FlexIO I2S eDMA send successfully.
kStatus_InvalidArgument – The input arguments is invalid.
kStatus_TxBusy – FlexIO I2S is busy sending data.

status_t FLEXIO_I2S_TransferReceiveEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle, flexio_i2s_transfer_t *xfer)

Performs a non-blocking FlexIO I2S receive using eDMA.

Note

This interface returned immediately after transfer initiates. Users should call FLEXIO_I2S_GetReceiveRemainingBytes to poll the transfer status and check whether the FlexIO I2S transfer is finished.

Parameters:

base – FlexIO I2S peripheral base address.
handle – FlexIO I2S DMA handle pointer.
xfer – Pointer to DMA transfer structure.

Return values:

kStatus_Success – Start a FlexIO I2S eDMA receive successfully.
kStatus_InvalidArgument – The input arguments is invalid.
kStatus_RxBusy – FlexIO I2S is busy receiving data.

void FLEXIO_I2S_TransferAbortSendEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle)

Aborts a FlexIO I2S transfer using eDMA.

Parameters:

base – FlexIO I2S peripheral base address.
handle – FlexIO I2S DMA handle pointer.

void FLEXIO_I2S_TransferAbortReceiveEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle)

Aborts a FlexIO I2S receive using eDMA.

Parameters:

base – FlexIO I2S peripheral base address.
handle – FlexIO I2S DMA handle pointer.

status_t FLEXIO_I2S_TransferGetSendCountEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle, size_t *count)

Gets the remaining bytes to be sent.

Parameters:

base – FlexIO I2S peripheral base address.
handle – FlexIO I2S DMA handle pointer.
count – Bytes sent.

Return values:

kStatus_Success – Succeed get the transfer count.
kStatus_NoTransferInProgress – There is not a non-blocking transaction currently in progress.

status_t FLEXIO_I2S_TransferGetReceiveCountEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle, size_t *count)

Get the remaining bytes to be received.

Parameters:

base – FlexIO I2S peripheral base address.
handle – FlexIO I2S DMA handle pointer.
count – Bytes received.

Return values:

kStatus_Success – Succeed get the transfer count.
kStatus_NoTransferInProgress – There is not a non-blocking transaction currently in progress.

FSL_FLEXIO_I2S_EDMA_DRIVER_VERSION: FlexIO I2S EDMA driver version 2.1.9.

typedef struct _flexio_i2s_edma_handle flexio_i2s_edma_handle_t

typedef void (*flexio_i2s_edma_callback_t)(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle, status_t status, void *userData): FlexIO I2S eDMA transfer callback function for finish and error.

struct _flexio_i2s_edma_handle

#include <fsl_flexio_i2s_edma.h>

FlexIO I2S DMA transfer handle, users should not touch the content of the handle.

Public Members

edma_handle_t *dmaHandle: DMA handler for FlexIO I2S send

uint8_t bytesPerFrame: Bytes in a frame

uint8_t nbytes: eDMA minor byte transfer count initially configured.

uint32_t state: Internal state for FlexIO I2S eDMA transfer

flexio_i2s_edma_callback_t callback: Callback for users while transfer finish or error occurred

void *userData: User callback parameter

edma_tcd_t tcd[(4U) + 1U]: TCD pool for eDMA transfer.

flexio_i2s_transfer_t queue[(4U)]: Transfer queue storing queued transfer.

size_t transferSize[(4U)]: Data bytes need to transfer

volatile uint8_t queueUser: Index for user to queue transfer.

volatile uint8_t queueDriver: Index for driver to get the transfer data and size

FlexIO eDMA MCU Interface LCD Driver#

status_t FLEXIO_MCULCD_TransferCreateHandleEDMA(FLEXIO_MCULCD_Type *base, flexio_mculcd_edma_handle_t *handle, flexio_mculcd_edma_transfer_callback_t callback, void *userData, edma_handle_t *txDmaHandle, edma_handle_t *rxDmaHandle)

Initializes the FLEXO MCULCD master eDMA handle.

This function initializes the FLEXO MCULCD master eDMA handle which can be used for other FLEXO MCULCD transactional APIs. For a specified FLEXO MCULCD instance, call this API once to get the initialized handle.

Parameters:

base – Pointer to FLEXIO_MCULCD_Type structure.
handle – Pointer to flexio_mculcd_edma_handle_t structure to store the transfer state.
callback – MCULCD transfer complete callback, NULL means no callback.
userData – callback function parameter.
txDmaHandle – User requested eDMA handle for FlexIO MCULCD eDMA TX, the DMA request source of this handle should be the first of TX shifters.
rxDmaHandle – User requested eDMA handle for FlexIO MCULCD eDMA RX, the DMA request source of this handle should be the last of RX shifters.

Return values:

kStatus_Success – Successfully create the handle.

status_t FLEXIO_MCULCD_TransferEDMA(FLEXIO_MCULCD_Type *base, flexio_mculcd_edma_handle_t *handle, flexio_mculcd_transfer_t *xfer)

Performs a non-blocking FlexIO MCULCD transfer using eDMA.

This function returns immediately after transfer initiates. To check whether the transfer is completed, user could:

Use the transfer completed callback;
Polling function FLEXIO_MCULCD_GetTransferCountEDMA

Parameters:

base – pointer to FLEXIO_MCULCD_Type structure.
handle – pointer to flexio_mculcd_edma_handle_t structure to store the transfer state.
xfer – Pointer to FlexIO MCULCD transfer structure.

Return values:

kStatus_Success – Successfully start a transfer.
kStatus_InvalidArgument – Input argument is invalid.
kStatus_FLEXIO_MCULCD_Busy – FlexIO MCULCD is not idle, it is running another transfer.

void FLEXIO_MCULCD_TransferAbortEDMA(FLEXIO_MCULCD_Type *base, flexio_mculcd_edma_handle_t *handle)

Aborts a FlexIO MCULCD transfer using eDMA.

Parameters:

base – pointer to FLEXIO_MCULCD_Type structure.
handle – FlexIO MCULCD eDMA handle pointer.

status_t FLEXIO_MCULCD_TransferGetCountEDMA(FLEXIO_MCULCD_Type *base, flexio_mculcd_edma_handle_t *handle, size_t *count)

Gets the remaining bytes for FlexIO MCULCD eDMA transfer.

Parameters:

base – pointer to FLEXIO_MCULCD_Type structure.
handle – FlexIO MCULCD eDMA handle pointer.
count – Number of count transferred so far by the eDMA transaction.

Return values:

kStatus_Success – Get the transferred count Successfully.
kStatus_NoTransferInProgress – No transfer in process.

typedef struct _flexio_mculcd_edma_handle flexio_mculcd_edma_handle_t: typedef for flexio_mculcd_edma_handle_t in advance.

typedef void (*flexio_mculcd_edma_transfer_callback_t)(FLEXIO_MCULCD_Type *base, flexio_mculcd_edma_handle_t *handle, status_t status, void *userData)

FlexIO MCULCD master callback for transfer complete.

When transfer finished, the callback function is called and returns the status as kStatus_FLEXIO_MCULCD_Idle.

FSL_FLEXIO_MCULCD_EDMA_DRIVER_VERSION: FlexIO MCULCD EDMA driver version.

struct _flexio_mculcd_edma_handle

#include <fsl_flexio_mculcd_edma.h>

FlexIO MCULCD eDMA transfer handle, users should not touch the content of the handle.

Public Members

FLEXIO_MCULCD_Type *base: Pointer to the FLEXIO_MCULCD_Type.

uint8_t txShifterNum: Number of shifters used for TX.

uint8_t rxShifterNum: Number of shifters used for RX.

uint32_t minorLoopBytes: eDMA transfer minor loop bytes.

edma_modulo_t txEdmaModulo: Modulo value for the FlexIO shifter buffer access.

edma_modulo_t rxEdmaModulo: Modulo value for the FlexIO shifter buffer access.

uint32_t dataAddrOrSameValue: When sending the same value for many times, this is the value to send. When writing or reading array, this is the address of the data array.

size_t dataCount: Total count to be transferred.

volatile size_t remainingCount: Remaining count still not transfered.

volatile uint32_t state: FlexIO MCULCD driver internal state.

edma_handle_t *txDmaHandle: DMA handle for MCULCD TX

edma_handle_t *rxDmaHandle: DMA handle for MCULCD RX

flexio_mculcd_edma_transfer_callback_t completionCallback: Callback for MCULCD DMA transfer

void *userData: User Data for MCULCD DMA callback

FlexIO eDMA SPI Driver#

status_t FLEXIO_SPI_MasterTransferCreateHandleEDMA(FLEXIO_SPI_Type *base, flexio_spi_master_edma_handle_t *handle, flexio_spi_master_edma_transfer_callback_t callback, void *userData, edma_handle_t *txHandle, edma_handle_t *rxHandle)

Initializes the FlexIO SPI master eDMA handle.

This function initializes the FlexIO SPI master eDMA handle which can be used for other FlexIO SPI master transactional APIs. For a specified FlexIO SPI instance, call this API once to get the initialized handle.

Parameters:

base – Pointer to FLEXIO_SPI_Type structure.
handle – Pointer to flexio_spi_master_edma_handle_t structure to store the transfer state.
callback – SPI callback, NULL means no callback.
userData – callback function parameter.
txHandle – User requested eDMA handle for FlexIO SPI RX eDMA transfer.
rxHandle – User requested eDMA handle for FlexIO SPI TX eDMA transfer.

Return values:

kStatus_Success – Successfully create the handle.
kStatus_OutOfRange – The FlexIO SPI eDMA type/handle table out of range.

status_t FLEXIO_SPI_MasterTransferEDMA(FLEXIO_SPI_Type *base, flexio_spi_master_edma_handle_t *handle, flexio_spi_transfer_t *xfer)

Performs a non-blocking FlexIO SPI transfer using eDMA.

Note

This interface returns immediately after transfer initiates. Call FLEXIO_SPI_MasterGetTransferCountEDMA to poll the transfer status and check whether the FlexIO SPI transfer is finished.

Parameters:

base – Pointer to FLEXIO_SPI_Type structure.
handle – Pointer to flexio_spi_master_edma_handle_t structure to store the transfer state.
xfer – Pointer to FlexIO SPI transfer structure.

Return values:

kStatus_Success – Successfully start a transfer.
kStatus_InvalidArgument – Input argument is invalid.
kStatus_FLEXIO_SPI_Busy – FlexIO SPI is not idle, is running another transfer.

void FLEXIO_SPI_MasterTransferAbortEDMA(FLEXIO_SPI_Type *base, flexio_spi_master_edma_handle_t *handle)

Aborts a FlexIO SPI transfer using eDMA.

Parameters:

base – Pointer to FLEXIO_SPI_Type structure.
handle – FlexIO SPI eDMA handle pointer.

status_t FLEXIO_SPI_MasterTransferGetCountEDMA(FLEXIO_SPI_Type *base, flexio_spi_master_edma_handle_t *handle, size_t *count)

Gets the number of bytes transferred so far using FlexIO SPI master eDMA.

Parameters:

base – Pointer to FLEXIO_SPI_Type structure.
handle – FlexIO SPI eDMA handle pointer.
count – Number of bytes transferred so far by the non-blocking transaction.

static inline void FLEXIO_SPI_SlaveTransferCreateHandleEDMA(FLEXIO_SPI_Type *base, flexio_spi_slave_edma_handle_t *handle, flexio_spi_slave_edma_transfer_callback_t callback, void *userData, edma_handle_t *txHandle, edma_handle_t *rxHandle)

Initializes the FlexIO SPI slave eDMA handle.

This function initializes the FlexIO SPI slave eDMA handle.

Parameters:

base – Pointer to FLEXIO_SPI_Type structure.
handle – Pointer to flexio_spi_slave_edma_handle_t structure to store the transfer state.
callback – SPI callback, NULL means no callback.
userData – callback function parameter.
txHandle – User requested eDMA handle for FlexIO SPI TX eDMA transfer.
rxHandle – User requested eDMA handle for FlexIO SPI RX eDMA transfer.

status_t FLEXIO_SPI_SlaveTransferEDMA(FLEXIO_SPI_Type *base, flexio_spi_slave_edma_handle_t *handle, flexio_spi_transfer_t *xfer)

Performs a non-blocking FlexIO SPI transfer using eDMA.

Note

This interface returns immediately after transfer initiates. Call FLEXIO_SPI_SlaveGetTransferCountEDMA to poll the transfer status and check whether the FlexIO SPI transfer is finished.

Parameters:

base – Pointer to FLEXIO_SPI_Type structure.
handle – Pointer to flexio_spi_slave_edma_handle_t structure to store the transfer state.
xfer – Pointer to FlexIO SPI transfer structure.

Return values:

kStatus_Success – Successfully start a transfer.
kStatus_InvalidArgument – Input argument is invalid.
kStatus_FLEXIO_SPI_Busy – FlexIO SPI is not idle, is running another transfer.

static inline void FLEXIO_SPI_SlaveTransferAbortEDMA(FLEXIO_SPI_Type *base, flexio_spi_slave_edma_handle_t *handle)

Aborts a FlexIO SPI transfer using eDMA.

Parameters:

base – Pointer to FLEXIO_SPI_Type structure.
handle – Pointer to flexio_spi_slave_edma_handle_t structure to store the transfer state.

static inline status_t FLEXIO_SPI_SlaveTransferGetCountEDMA(FLEXIO_SPI_Type *base, flexio_spi_slave_edma_handle_t *handle, size_t *count)

Gets the number of bytes transferred so far using FlexIO SPI slave eDMA.

Parameters:

base – Pointer to FLEXIO_SPI_Type structure.
handle – FlexIO SPI eDMA handle pointer.
count – Number of bytes transferred so far by the non-blocking transaction.

FSL_FLEXIO_SPI_EDMA_DRIVER_VERSION: FlexIO SPI EDMA driver version.

typedef struct _flexio_spi_master_edma_handle flexio_spi_master_edma_handle_t: typedef for flexio_spi_master_edma_handle_t in advance.

typedef flexio_spi_master_edma_handle_t flexio_spi_slave_edma_handle_t: Slave handle is the same with master handle.

typedef void (*flexio_spi_master_edma_transfer_callback_t)(FLEXIO_SPI_Type *base, flexio_spi_master_edma_handle_t *handle, status_t status, void *userData): FlexIO SPI master callback for finished transmit.

typedef void (*flexio_spi_slave_edma_transfer_callback_t)(FLEXIO_SPI_Type *base, flexio_spi_slave_edma_handle_t *handle, status_t status, void *userData): FlexIO SPI slave callback for finished transmit.

struct _flexio_spi_master_edma_handle

#include <fsl_flexio_spi_edma.h>

FlexIO SPI eDMA transfer handle, users should not touch the content of the handle.

Public Members

size_t transferSize: Total bytes to be transferred.

uint8_t nbytes: eDMA minor byte transfer count initially configured.

bool txInProgress: Send transfer in progress

bool rxInProgress: Receive transfer in progress

edma_handle_t *txHandle: DMA handler for SPI send

edma_handle_t *rxHandle: DMA handler for SPI receive

flexio_spi_master_edma_transfer_callback_t callback: Callback for SPI DMA transfer

void *userData: User Data for SPI DMA callback

FlexIO eDMA UART Driver#

status_t FLEXIO_UART_TransferCreateHandleEDMA(FLEXIO_UART_Type *base, flexio_uart_edma_handle_t *handle, flexio_uart_edma_transfer_callback_t callback, void *userData, edma_handle_t *txEdmaHandle, edma_handle_t *rxEdmaHandle)

Initializes the UART handle which is used in transactional functions.

Parameters:

base – Pointer to FLEXIO_UART_Type.
handle – Pointer to flexio_uart_edma_handle_t structure.
callback – The callback function.
userData – The parameter of the callback function.
rxEdmaHandle – User requested DMA handle for RX DMA transfer.
txEdmaHandle – User requested DMA handle for TX DMA transfer.

Return values:

kStatus_Success – Successfully create the handle.
kStatus_OutOfRange – The FlexIO SPI eDMA type/handle table out of range.

status_t FLEXIO_UART_TransferSendEDMA(FLEXIO_UART_Type *base, flexio_uart_edma_handle_t *handle, flexio_uart_transfer_t *xfer)

Sends data using eDMA.

This function sends data using eDMA. This is a non-blocking function, which returns right away. When all data is sent out, the send callback function is called.

Parameters:

base – Pointer to FLEXIO_UART_Type
handle – UART handle pointer.
xfer – UART eDMA transfer structure, see flexio_uart_transfer_t.

Return values:

kStatus_Success – if succeed, others failed.
kStatus_FLEXIO_UART_TxBusy – Previous transfer on going.

status_t FLEXIO_UART_TransferReceiveEDMA(FLEXIO_UART_Type *base, flexio_uart_edma_handle_t *handle, flexio_uart_transfer_t *xfer)

Receives data using eDMA.

This function receives data using eDMA. This is a non-blocking function, which returns right away. When all data is received, the receive callback function is called.

Parameters:

base – Pointer to FLEXIO_UART_Type
handle – Pointer to flexio_uart_edma_handle_t structure
xfer – UART eDMA transfer structure, see flexio_uart_transfer_t.

Return values:

kStatus_Success – if succeed, others failed.
kStatus_UART_RxBusy – Previous transfer on going.

void FLEXIO_UART_TransferAbortSendEDMA(FLEXIO_UART_Type *base, flexio_uart_edma_handle_t *handle)

Aborts the sent data which using eDMA.

This function aborts sent data which using eDMA.

Parameters:

base – Pointer to FLEXIO_UART_Type
handle – Pointer to flexio_uart_edma_handle_t structure

void FLEXIO_UART_TransferAbortReceiveEDMA(FLEXIO_UART_Type *base, flexio_uart_edma_handle_t *handle)

Aborts the receive data which using eDMA.

This function aborts the receive data which using eDMA.

Parameters:

base – Pointer to FLEXIO_UART_Type
handle – Pointer to flexio_uart_edma_handle_t structure

status_t FLEXIO_UART_TransferGetSendCountEDMA(FLEXIO_UART_Type *base, flexio_uart_edma_handle_t *handle, size_t *count)

Gets the number of bytes sent out.

This function gets the number of bytes sent out.

Parameters:

base – Pointer to FLEXIO_UART_Type
handle – Pointer to flexio_uart_edma_handle_t structure
count – Number of bytes sent so far by the non-blocking transaction.

Return values:

kStatus_NoTransferInProgress – transfer has finished or no transfer in progress.
kStatus_Success – Successfully return the count.

status_t FLEXIO_UART_TransferGetReceiveCountEDMA(FLEXIO_UART_Type *base, flexio_uart_edma_handle_t *handle, size_t *count)

Gets the number of bytes received.

This function gets the number of bytes received.

Parameters:

base – Pointer to FLEXIO_UART_Type
handle – Pointer to flexio_uart_edma_handle_t structure
count – Number of bytes received so far by the non-blocking transaction.

Return values:

kStatus_NoTransferInProgress – transfer has finished or no transfer in progress.
kStatus_Success – Successfully return the count.

FSL_FLEXIO_UART_EDMA_DRIVER_VERSION: FlexIO UART EDMA driver version.

typedef struct _flexio_uart_edma_handle flexio_uart_edma_handle_t

typedef void (*flexio_uart_edma_transfer_callback_t)(FLEXIO_UART_Type *base, flexio_uart_edma_handle_t *handle, status_t status, void *userData): UART transfer callback function.

struct _flexio_uart_edma_handle

#include <fsl_flexio_uart_edma.h>

UART eDMA handle.

Public Members

flexio_uart_edma_transfer_callback_t callback: Callback function.

void *userData: UART callback function parameter.

size_t txDataSizeAll: Total bytes to be sent.

size_t rxDataSizeAll: Total bytes to be received.

edma_handle_t *txEdmaHandle: The eDMA TX channel used.

edma_handle_t *rxEdmaHandle: The eDMA RX channel used.

uint8_t nbytes: eDMA minor byte transfer count initially configured.

volatile uint8_t txState: TX transfer state.

volatile uint8_t rxState: RX transfer state

FlexIO I2C Master Driver#

status_t FLEXIO_I2C_CheckForBusyBus(FLEXIO_I2C_Type *base)

Make sure the bus isn’t already pulled down.

Check the FLEXIO pin status to see whether either of SDA and SCL pin is pulled down.

Parameters:

base – Pointer to FLEXIO_I2C_Type structure..

Return values:

kStatus_Success –
kStatus_FLEXIO_I2C_Busy –

status_t FLEXIO_I2C_MasterInit(FLEXIO_I2C_Type *base, flexio_i2c_master_config_t *masterConfig, uint32_t srcClock_Hz)

Ungates the FlexIO clock, resets the FlexIO module, and configures the FlexIO I2C hardware configuration.

Example

FLEXIO_I2C_Type base = {
.flexioBase = FLEXIO,
.SDAPinIndex = 0,
.SCLPinIndex = 1,
.shifterIndex = {0,1},
.timerIndex = {0,1}
};
flexio_i2c_master_config_t config = {
.enableInDoze = false,
.enableInDebug = true,
.enableFastAccess = false,
.baudRate_Bps = 100000
};
FLEXIO_I2C_MasterInit(base, &config, srcClock_Hz);

Parameters:

base – Pointer to FLEXIO_I2C_Type structure.
masterConfig – Pointer to flexio_i2c_master_config_t structure.
srcClock_Hz – FlexIO source clock in Hz.

Return values:

kStatus_Success – Initialization successful
kStatus_InvalidArgument – The source clock exceed upper range limitation

void FLEXIO_I2C_MasterDeinit(FLEXIO_I2C_Type *base)

De-initializes the FlexIO I2C master peripheral. Calling this API Resets the FlexIO I2C master shifer and timer config, module can’t work unless the FLEXIO_I2C_MasterInit is called.

Parameters:

base – pointer to FLEXIO_I2C_Type structure.

void FLEXIO_I2C_MasterGetDefaultConfig(flexio_i2c_master_config_t *masterConfig)

Gets the default configuration to configure the FlexIO module. The configuration can be used directly for calling the FLEXIO_I2C_MasterInit().

Example:

flexio_i2c_master_config_t config;
FLEXIO_I2C_MasterGetDefaultConfig(&config);

Parameters:

masterConfig – Pointer to flexio_i2c_master_config_t structure.

static inline void FLEXIO_I2C_MasterEnable(FLEXIO_I2C_Type *base, bool enable)

Enables/disables the FlexIO module operation.

Parameters:

base – Pointer to FLEXIO_I2C_Type structure.
enable – Pass true to enable module, false does not have any effect.

uint32_t FLEXIO_I2C_MasterGetStatusFlags(FLEXIO_I2C_Type *base)

Gets the FlexIO I2C master status flags.

Parameters:

base – Pointer to FLEXIO_I2C_Type structure

Returns:

Status flag, use status flag to AND _flexio_i2c_master_status_flags can get the related status.

void FLEXIO_I2C_MasterClearStatusFlags(FLEXIO_I2C_Type *base, uint32_t mask)

Clears the FlexIO I2C master status flags.

Parameters:

base – Pointer to FLEXIO_I2C_Type structure.
mask – Status flag. The parameter can be any combination of the following values:
- kFLEXIO_I2C_RxFullFlag
- kFLEXIO_I2C_ReceiveNakFlag

void FLEXIO_I2C_MasterEnableInterrupts(FLEXIO_I2C_Type *base, uint32_t mask)

Enables the FlexIO i2c master interrupt requests.

Parameters:

base – Pointer to FLEXIO_I2C_Type structure.
mask – Interrupt source. Currently only one interrupt request source:
- kFLEXIO_I2C_TransferCompleteInterruptEnable

void FLEXIO_I2C_MasterDisableInterrupts(FLEXIO_I2C_Type *base, uint32_t mask)

Disables the FlexIO I2C master interrupt requests.

Parameters:

base – Pointer to FLEXIO_I2C_Type structure.
mask – Interrupt source.

void FLEXIO_I2C_MasterSetBaudRate(FLEXIO_I2C_Type *base, uint32_t baudRate_Bps, uint32_t srcClock_Hz)

Sets the FlexIO I2C master transfer baudrate.

Parameters:

base – Pointer to FLEXIO_I2C_Type structure
baudRate_Bps – the baud rate value in HZ
srcClock_Hz – source clock in HZ

void FLEXIO_I2C_MasterStart(FLEXIO_I2C_Type *base, uint8_t address, flexio_i2c_direction_t direction)

Sends START + 7-bit address to the bus.

Note

This API should be called when the transfer configuration is ready to send a START signal and 7-bit address to the bus. This is a non-blocking API, which returns directly after the address is put into the data register but the address transfer is not finished on the bus. Ensure that the kFLEXIO_I2C_RxFullFlag status is asserted before calling this API.

Parameters:

base – Pointer to FLEXIO_I2C_Type structure.
address – 7-bit address.
direction – transfer direction. This parameter is one of the values in flexio_i2c_direction_t:
- kFLEXIO_I2C_Write: Transmit
- kFLEXIO_I2C_Read: Receive

void FLEXIO_I2C_MasterStop(FLEXIO_I2C_Type *base)

Sends the stop signal on the bus.

Parameters:

base – Pointer to FLEXIO_I2C_Type structure.

void FLEXIO_I2C_MasterRepeatedStart(FLEXIO_I2C_Type *base)

Sends the repeated start signal on the bus.

Parameters:

base – Pointer to FLEXIO_I2C_Type structure.

void FLEXIO_I2C_MasterAbortStop(FLEXIO_I2C_Type *base)

Sends the stop signal when transfer is still on-going.

Parameters:

base – Pointer to FLEXIO_I2C_Type structure.

void FLEXIO_I2C_MasterEnableAck(FLEXIO_I2C_Type *base, bool enable)

Configures the sent ACK/NAK for the following byte.

Parameters:

base – Pointer to FLEXIO_I2C_Type structure.
enable – True to configure send ACK, false configure to send NAK.

status_t FLEXIO_I2C_MasterSetTransferCount(FLEXIO_I2C_Type *base, uint16_t count)

Sets the number of bytes to be transferred from a start signal to a stop signal.

Note

Call this API before a transfer begins because the timer generates a number of clocks according to the number of bytes that need to be transferred.

Parameters:

base – Pointer to FLEXIO_I2C_Type structure.
count – Number of bytes need to be transferred from a start signal to a re-start/stop signal

Return values:

kStatus_Success – Successfully configured the count.
kStatus_InvalidArgument – Input argument is invalid.

static inline void FLEXIO_I2C_MasterWriteByte(FLEXIO_I2C_Type *base, uint32_t data)

Writes one byte of data to the I2C bus.

Note

This is a non-blocking API, which returns directly after the data is put into the data register but the data transfer is not finished on the bus. Ensure that the TxEmptyFlag is asserted before calling this API.

Parameters:

base – Pointer to FLEXIO_I2C_Type structure.
data – a byte of data.

static inline uint8_t FLEXIO_I2C_MasterReadByte(FLEXIO_I2C_Type *base)

Reads one byte of data from the I2C bus.

Note

This is a non-blocking API, which returns directly after the data is read from the data register. Ensure that the data is ready in the register.

Parameters:

base – Pointer to FLEXIO_I2C_Type structure.

Returns:

data byte read.

status_t FLEXIO_I2C_MasterWriteBlocking(FLEXIO_I2C_Type *base, const uint8_t *txBuff, uint8_t txSize)

Sends a buffer of data in bytes.

Note

This function blocks via polling until all bytes have been sent.

Parameters:

base – Pointer to FLEXIO_I2C_Type structure.
txBuff – The data bytes to send.
txSize – The number of data bytes to send.

Return values:

kStatus_Success – Successfully write data.
kStatus_FLEXIO_I2C_Nak – Receive NAK during writing data.
kStatus_FLEXIO_I2C_Timeout – Timeout polling status flags.

status_t FLEXIO_I2C_MasterReadBlocking(FLEXIO_I2C_Type *base, uint8_t *rxBuff, uint8_t rxSize)

Receives a buffer of bytes.

Note

This function blocks via polling until all bytes have been received.

Parameters:

base – Pointer to FLEXIO_I2C_Type structure.
rxBuff – The buffer to store the received bytes.
rxSize – The number of data bytes to be received.

Return values:

kStatus_Success – Successfully read data.
kStatus_FLEXIO_I2C_Timeout – Timeout polling status flags.

status_t FLEXIO_I2C_MasterTransferBlocking(FLEXIO_I2C_Type *base, flexio_i2c_master_transfer_t *xfer)

Performs a master polling transfer on the I2C bus.

Note

The API does not return until the transfer succeeds or fails due to receiving NAK.

Parameters:

base – pointer to FLEXIO_I2C_Type structure.
xfer – pointer to flexio_i2c_master_transfer_t structure.

Returns:

status of status_t.

status_t FLEXIO_I2C_MasterTransferCreateHandle(FLEXIO_I2C_Type *base, flexio_i2c_master_handle_t *handle, flexio_i2c_master_transfer_callback_t callback, void *userData)

Initializes the I2C handle which is used in transactional functions.

Parameters:

base – Pointer to FLEXIO_I2C_Type structure.
handle – Pointer to flexio_i2c_master_handle_t structure to store the transfer state.
callback – Pointer to user callback function.
userData – User param passed to the callback function.

Return values:

kStatus_Success – Successfully create the handle.
kStatus_OutOfRange – The FlexIO type/handle/isr table out of range.

status_t FLEXIO_I2C_MasterTransferNonBlocking(FLEXIO_I2C_Type *base, flexio_i2c_master_handle_t *handle, flexio_i2c_master_transfer_t *xfer)

Performs a master interrupt non-blocking transfer on the I2C bus.

Note

The API returns immediately after the transfer initiates. Call FLEXIO_I2C_MasterTransferGetCount to poll the transfer status to check whether the transfer is finished. If the return status is not kStatus_FLEXIO_I2C_Busy, the transfer is finished.

Parameters:

base – Pointer to FLEXIO_I2C_Type structure
handle – Pointer to flexio_i2c_master_handle_t structure which stores the transfer state
xfer – pointer to flexio_i2c_master_transfer_t structure

Return values:

kStatus_Success – Successfully start a transfer.
kStatus_FLEXIO_I2C_Busy – FlexIO I2C is not idle, is running another transfer.

status_t FLEXIO_I2C_MasterTransferGetCount(FLEXIO_I2C_Type *base, flexio_i2c_master_handle_t *handle, size_t *count)

Gets the master transfer status during a interrupt non-blocking transfer.

Parameters:

base – Pointer to FLEXIO_I2C_Type structure.
handle – Pointer to flexio_i2c_master_handle_t structure which stores the transfer state.
count – Number of bytes transferred so far by the non-blocking transaction.

Return values:

kStatus_InvalidArgument – count is Invalid.
kStatus_NoTransferInProgress – There is not a non-blocking transaction currently in progress.
kStatus_Success – Successfully return the count.

void FLEXIO_I2C_MasterTransferAbort(FLEXIO_I2C_Type *base, flexio_i2c_master_handle_t *handle)

Aborts an interrupt non-blocking transfer early.

Note

This API can be called at any time when an interrupt non-blocking transfer initiates to abort the transfer early.

Parameters:

base – Pointer to FLEXIO_I2C_Type structure
handle – Pointer to flexio_i2c_master_handle_t structure which stores the transfer state

void FLEXIO_I2C_MasterTransferHandleIRQ(void *i2cType, void *i2cHandle)

Master interrupt handler.

Parameters:

i2cType – Pointer to FLEXIO_I2C_Type structure
i2cHandle – Pointer to flexio_i2c_master_transfer_t structure

FSL_FLEXIO_I2C_MASTER_DRIVER_VERSION

FlexIO I2C transfer status.

Values:

enumerator kStatus_FLEXIO_I2C_Busy: I2C is busy doing transfer.

enumerator kStatus_FLEXIO_I2C_Idle: I2C is busy doing transfer.

enumerator kStatus_FLEXIO_I2C_Nak: NAK received during transfer.

enumerator kStatus_FLEXIO_I2C_Timeout: Timeout polling status flags.

enum _flexio_i2c_master_interrupt

Define FlexIO I2C master interrupt mask.

Values:

enumerator kFLEXIO_I2C_TxEmptyInterruptEnable: Tx buffer empty interrupt enable.

enumerator kFLEXIO_I2C_RxFullInterruptEnable: Rx buffer full interrupt enable.

enum _flexio_i2c_master_status_flags

Define FlexIO I2C master status mask.

Values:

enumerator kFLEXIO_I2C_TxEmptyFlag: Tx shifter empty flag.

enumerator kFLEXIO_I2C_RxFullFlag: Rx shifter full/Transfer complete flag.

enumerator kFLEXIO_I2C_ReceiveNakFlag: Receive NAK flag.

enum _flexio_i2c_direction

Direction of master transfer.

Values:

enumerator kFLEXIO_I2C_Write: Master send to slave.

enumerator kFLEXIO_I2C_Read: Master receive from slave.

typedef enum _flexio_i2c_direction flexio_i2c_direction_t: Direction of master transfer.

typedef struct _flexio_i2c_type FLEXIO_I2C_Type: Define FlexIO I2C master access structure typedef.

typedef struct _flexio_i2c_master_config flexio_i2c_master_config_t: Define FlexIO I2C master user configuration structure.

typedef struct _flexio_i2c_master_transfer flexio_i2c_master_transfer_t: Define FlexIO I2C master transfer structure.

typedef struct _flexio_i2c_master_handle flexio_i2c_master_handle_t: FlexIO I2C master handle typedef.

typedef void (*flexio_i2c_master_transfer_callback_t)(FLEXIO_I2C_Type *base, flexio_i2c_master_handle_t *handle, status_t status, void *userData): FlexIO I2C master transfer callback typedef.

I2C_RETRY_TIMES: Retry times for waiting flag.

struct _flexio_i2c_type

#include <fsl_flexio_i2c_master.h>

Define FlexIO I2C master access structure typedef.

Public Members

FLEXIO_Type *flexioBase: FlexIO base pointer.

uint8_t SDAPinIndex: Pin select for I2C SDA.

uint8_t SCLPinIndex: Pin select for I2C SCL.

uint8_t shifterIndex[2]: Shifter index used in FlexIO I2C.

uint8_t timerIndex[3]: Timer index used in FlexIO I2C.

uint32_t baudrate: Master transfer baudrate, used to calculate delay time.

struct _flexio_i2c_master_config

#include <fsl_flexio_i2c_master.h>

Define FlexIO I2C master user configuration structure.

Public Members

bool enableMaster: Enables the FlexIO I2C peripheral at initialization time.

bool enableInDoze: Enable/disable FlexIO operation in doze mode.

bool enableInDebug: Enable/disable FlexIO operation in debug mode.

bool enableFastAccess: Enable/disable fast access to FlexIO registers, fast access requires the FlexIO clock to be at least twice the frequency of the bus clock.

uint32_t baudRate_Bps: Baud rate in Bps.

struct _flexio_i2c_master_transfer

#include <fsl_flexio_i2c_master.h>

Define FlexIO I2C master transfer structure.

Public Members

uint32_t flags: Transfer flag which controls the transfer, reserved for FlexIO I2C.

uint8_t slaveAddress: 7-bit slave address.

flexio_i2c_direction_t direction: Transfer direction, read or write.

uint32_t subaddress: Sub address. Transferred MSB first.

uint8_t subaddressSize: Size of sub address.

uint8_t volatile *data: Transfer buffer.

volatile size_t dataSize: Transfer size.

struct _flexio_i2c_master_handle

#include <fsl_flexio_i2c_master.h>

Define FlexIO I2C master handle structure.

Public Members

flexio_i2c_master_transfer_t transfer: FlexIO I2C master transfer copy.

size_t transferSize: Total bytes to be transferred.

uint8_t state: Transfer state maintained during transfer.

flexio_i2c_master_transfer_callback_t completionCallback: Callback function called at transfer event. Callback function called at transfer event.

void *userData: Callback parameter passed to callback function.

bool needRestart: Whether master needs to send re-start signal.

FlexIO I2S Driver#

void FLEXIO_I2S_Init(FLEXIO_I2S_Type *base, const flexio_i2s_config_t *config)

Initializes the FlexIO I2S.

This API configures FlexIO pins and shifter to I2S and configures the FlexIO I2S with a configuration structure. The configuration structure can be filled by the user, or be set with default values by FLEXIO_I2S_GetDefaultConfig().

Note

This API should be called at the beginning of the application to use the FlexIO I2S driver. Otherwise, any access to the FlexIO I2S module can cause hard fault because the clock is not enabled.

Parameters:

base – FlexIO I2S base pointer
config – FlexIO I2S configure structure.

void FLEXIO_I2S_GetDefaultConfig(flexio_i2s_config_t *config)

Sets the FlexIO I2S configuration structure to default values.

The purpose of this API is to get the configuration structure initialized for use in FLEXIO_I2S_Init(). Users may use the initialized structure unchanged in FLEXIO_I2S_Init() or modify some fields of the structure before calling FLEXIO_I2S_Init().

Parameters:

config – pointer to master configuration structure

void FLEXIO_I2S_Deinit(FLEXIO_I2S_Type *base)

De-initializes the FlexIO I2S.

Calling this API resets the FlexIO I2S shifter and timer config. After calling this API, call the FLEXO_I2S_Init to use the FlexIO I2S module.

Parameters:

base – FlexIO I2S base pointer

static inline void FLEXIO_I2S_Enable(FLEXIO_I2S_Type *base, bool enable)

Enables/disables the FlexIO I2S module operation.

Parameters:

base – Pointer to FLEXIO_I2S_Type
enable – True to enable, false dose not have any effect.

uint32_t FLEXIO_I2S_GetStatusFlags(FLEXIO_I2S_Type *base)

Gets the FlexIO I2S status flags.

Parameters:

base – Pointer to FLEXIO_I2S_Type structure

Returns:

Status flag, which are ORed by the enumerators in the _flexio_i2s_status_flags.

void FLEXIO_I2S_EnableInterrupts(FLEXIO_I2S_Type *base, uint32_t mask)

Enables the FlexIO I2S interrupt.

This function enables the FlexIO UART interrupt.

Parameters:

base – Pointer to FLEXIO_I2S_Type structure
mask – interrupt source

void FLEXIO_I2S_DisableInterrupts(FLEXIO_I2S_Type *base, uint32_t mask)

Disables the FlexIO I2S interrupt.

This function enables the FlexIO UART interrupt.

Parameters:

base – pointer to FLEXIO_I2S_Type structure
mask – interrupt source

static inline void FLEXIO_I2S_TxEnableDMA(FLEXIO_I2S_Type *base, bool enable)

Enables/disables the FlexIO I2S Tx DMA requests.

Parameters:

base – FlexIO I2S base pointer
enable – True means enable DMA, false means disable DMA.

static inline void FLEXIO_I2S_RxEnableDMA(FLEXIO_I2S_Type *base, bool enable)

Enables/disables the FlexIO I2S Rx DMA requests.

Parameters:

base – FlexIO I2S base pointer
enable – True means enable DMA, false means disable DMA.

static inline uint32_t FLEXIO_I2S_TxGetDataRegisterAddress(FLEXIO_I2S_Type *base)

Gets the FlexIO I2S send data register address.

This function returns the I2S data register address, mainly used by DMA/eDMA.

Parameters:

base – Pointer to FLEXIO_I2S_Type structure

Returns:

FlexIO i2s send data register address.

static inline uint32_t FLEXIO_I2S_RxGetDataRegisterAddress(FLEXIO_I2S_Type *base)

Gets the FlexIO I2S receive data register address.

This function returns the I2S data register address, mainly used by DMA/eDMA.

Parameters:

base – Pointer to FLEXIO_I2S_Type structure

Returns:

FlexIO i2s receive data register address.

void FLEXIO_I2S_MasterSetFormat(FLEXIO_I2S_Type *base, flexio_i2s_format_t *format, uint32_t srcClock_Hz)

Configures the FlexIO I2S audio format in master mode.

Audio format can be changed in run-time of FlexIO I2S. This function configures the sample rate and audio data format to be transferred.

Parameters:

base – Pointer to FLEXIO_I2S_Type structure
format – Pointer to FlexIO I2S audio data format structure.
srcClock_Hz – I2S master clock source frequency in Hz.

void FLEXIO_I2S_SlaveSetFormat(FLEXIO_I2S_Type *base, flexio_i2s_format_t *format)

Configures the FlexIO I2S audio format in slave mode.

Audio format can be changed in run-time of FlexIO I2S. This function configures the sample rate and audio data format to be transferred.

Parameters:

base – Pointer to FLEXIO_I2S_Type structure
format – Pointer to FlexIO I2S audio data format structure.

status_t FLEXIO_I2S_WriteBlocking(FLEXIO_I2S_Type *base, uint8_t bitWidth, uint8_t *txData, size_t size)

Sends data using a blocking method.

Note

This function blocks via polling until data is ready to be sent.

Parameters:

base – FlexIO I2S base pointer.
bitWidth – How many bits in a audio word, usually 8/16/24/32 bits.
txData – Pointer to the data to be written.
size – Bytes to be written.

Return values:

kStatus_Success – Successfully write data.
kStatus_FLEXIO_I2C_Timeout – Timeout polling status flags.

static inline void FLEXIO_I2S_WriteData(FLEXIO_I2S_Type *base, uint8_t bitWidth, uint32_t data)

Writes data into a data register.

Parameters:

base – FlexIO I2S base pointer.
bitWidth – How many bits in a audio word, usually 8/16/24/32 bits.
data – Data to be written.

status_t FLEXIO_I2S_ReadBlocking(FLEXIO_I2S_Type *base, uint8_t bitWidth, uint8_t *rxData, size_t size)

Receives a piece of data using a blocking method.

Note

This function blocks via polling until data is ready to be sent.

Parameters:

base – FlexIO I2S base pointer
bitWidth – How many bits in a audio word, usually 8/16/24/32 bits.
rxData – Pointer to the data to be read.
size – Bytes to be read.

Return values:

kStatus_Success – Successfully read data.
kStatus_FLEXIO_I2C_Timeout – Timeout polling status flags.

static inline uint32_t FLEXIO_I2S_ReadData(FLEXIO_I2S_Type *base)

Reads a data from the data register.

Parameters:

base – FlexIO I2S base pointer

Returns:

Data read from data register.

void FLEXIO_I2S_TransferTxCreateHandle(FLEXIO_I2S_Type *base, flexio_i2s_handle_t *handle, flexio_i2s_callback_t callback, void *userData)

Initializes the FlexIO I2S handle.

This function initializes the FlexIO I2S handle which can be used for other FlexIO I2S transactional APIs. Call this API once to get the initialized handle.

Parameters:

base – Pointer to FLEXIO_I2S_Type structure
handle – Pointer to flexio_i2s_handle_t structure to store the transfer state.
callback – FlexIO I2S callback function, which is called while finished a block.
userData – User parameter for the FlexIO I2S callback.

void FLEXIO_I2S_TransferSetFormat(FLEXIO_I2S_Type *base, flexio_i2s_handle_t *handle, flexio_i2s_format_t *format, uint32_t srcClock_Hz)

Configures the FlexIO I2S audio format.

Audio format can be changed at run-time of FlexIO I2S. This function configures the sample rate and audio data format to be transferred.

Parameters:

base – Pointer to FLEXIO_I2S_Type structure.
handle – FlexIO I2S handle pointer.
format – Pointer to audio data format structure.
srcClock_Hz – FlexIO I2S bit clock source frequency in Hz. This parameter should be 0 while in slave mode.

void FLEXIO_I2S_TransferRxCreateHandle(FLEXIO_I2S_Type *base, flexio_i2s_handle_t *handle, flexio_i2s_callback_t callback, void *userData)

Initializes the FlexIO I2S receive handle.

This function initializes the FlexIO I2S handle which can be used for other FlexIO I2S transactional APIs. Call this API once to get the initialized handle.

Parameters:

base – Pointer to FLEXIO_I2S_Type structure.
handle – Pointer to flexio_i2s_handle_t structure to store the transfer state.
callback – FlexIO I2S callback function, which is called while finished a block.
userData – User parameter for the FlexIO I2S callback.

status_t FLEXIO_I2S_TransferSendNonBlocking(FLEXIO_I2S_Type *base, flexio_i2s_handle_t *handle, flexio_i2s_transfer_t *xfer)

Performs an interrupt non-blocking send transfer on FlexIO I2S.

Note

The API returns immediately after transfer initiates. Call FLEXIO_I2S_GetRemainingBytes to poll the transfer status and check whether the transfer is finished. If the return status is 0, the transfer is finished.

Parameters:

base – Pointer to FLEXIO_I2S_Type structure.
handle – Pointer to flexio_i2s_handle_t structure which stores the transfer state
xfer – Pointer to flexio_i2s_transfer_t structure

Return values:

kStatus_Success – Successfully start the data transmission.
kStatus_FLEXIO_I2S_TxBusy – Previous transmission still not finished, data not all written to TX register yet.
kStatus_InvalidArgument – The input parameter is invalid.

status_t FLEXIO_I2S_TransferReceiveNonBlocking(FLEXIO_I2S_Type *base, flexio_i2s_handle_t *handle, flexio_i2s_transfer_t *xfer)

Performs an interrupt non-blocking receive transfer on FlexIO I2S.

Note

The API returns immediately after transfer initiates. Call FLEXIO_I2S_GetRemainingBytes to poll the transfer status to check whether the transfer is finished. If the return status is 0, the transfer is finished.

Parameters:

base – Pointer to FLEXIO_I2S_Type structure.
handle – Pointer to flexio_i2s_handle_t structure which stores the transfer state
xfer – Pointer to flexio_i2s_transfer_t structure

Return values:

kStatus_Success – Successfully start the data receive.
kStatus_FLEXIO_I2S_RxBusy – Previous receive still not finished.
kStatus_InvalidArgument – The input parameter is invalid.

void FLEXIO_I2S_TransferAbortSend(FLEXIO_I2S_Type *base, flexio_i2s_handle_t *handle)

Aborts the current send.

Note

This API can be called at any time when interrupt non-blocking transfer initiates to abort the transfer in a early time.

Parameters:

base – Pointer to FLEXIO_I2S_Type structure.
handle – Pointer to flexio_i2s_handle_t structure which stores the transfer state

void FLEXIO_I2S_TransferAbortReceive(FLEXIO_I2S_Type *base, flexio_i2s_handle_t *handle)

Aborts the current receive.

Note

This API can be called at any time when interrupt non-blocking transfer initiates to abort the transfer in a early time.

Parameters:

base – Pointer to FLEXIO_I2S_Type structure.
handle – Pointer to flexio_i2s_handle_t structure which stores the transfer state

status_t FLEXIO_I2S_TransferGetSendCount(FLEXIO_I2S_Type *base, flexio_i2s_handle_t *handle, size_t *count)

Gets the remaining bytes to be sent.

Parameters:

base – Pointer to FLEXIO_I2S_Type structure.
handle – Pointer to flexio_i2s_handle_t structure which stores the transfer state
count – Bytes sent.

Return values:

kStatus_Success – Succeed get the transfer count.
kStatus_NoTransferInProgress – There is not a non-blocking transaction currently in progress.

status_t FLEXIO_I2S_TransferGetReceiveCount(FLEXIO_I2S_Type *base, flexio_i2s_handle_t *handle, size_t *count)

Gets the remaining bytes to be received.

Parameters:

base – Pointer to FLEXIO_I2S_Type structure.
handle – Pointer to flexio_i2s_handle_t structure which stores the transfer state
count – Bytes recieved.

Return values:

kStatus_Success – Succeed get the transfer count.
kStatus_NoTransferInProgress – There is not a non-blocking transaction currently in progress.

Returns:

count Bytes received.

void FLEXIO_I2S_TransferTxHandleIRQ(void *i2sBase, void *i2sHandle)

Tx interrupt handler.

Parameters:

i2sBase – Pointer to FLEXIO_I2S_Type structure.
i2sHandle – Pointer to flexio_i2s_handle_t structure

void FLEXIO_I2S_TransferRxHandleIRQ(void *i2sBase, void *i2sHandle)

Rx interrupt handler.

Parameters:

i2sBase – Pointer to FLEXIO_I2S_Type structure.
i2sHandle – Pointer to flexio_i2s_handle_t structure.

FSL_FLEXIO_I2S_DRIVER_VERSION: FlexIO I2S driver version 2.2.2.

FlexIO I2S transfer status.

Values:

enumerator kStatus_FLEXIO_I2S_Idle: FlexIO I2S is in idle state

enumerator kStatus_FLEXIO_I2S_TxBusy: FlexIO I2S Tx is busy

enumerator kStatus_FLEXIO_I2S_RxBusy: FlexIO I2S Tx is busy

enumerator kStatus_FLEXIO_I2S_Error: FlexIO I2S error occurred

enumerator kStatus_FLEXIO_I2S_QueueFull: FlexIO I2S transfer queue is full.

enumerator kStatus_FLEXIO_I2S_Timeout: FlexIO I2S timeout polling status flags.

enum _flexio_i2s_master_slave

Master or slave mode.

Values:

enumerator kFLEXIO_I2S_Master: Master mode

enumerator kFLEXIO_I2S_Slave: Slave mode

_flexio_i2s_interrupt_enable Define FlexIO FlexIO I2S interrupt mask.

Values:

enumerator kFLEXIO_I2S_TxDataRegEmptyInterruptEnable: Transmit buffer empty interrupt enable.

enumerator kFLEXIO_I2S_RxDataRegFullInterruptEnable: Receive buffer full interrupt enable.

_flexio_i2s_status_flags Define FlexIO FlexIO I2S status mask.

Values:

enumerator kFLEXIO_I2S_TxDataRegEmptyFlag: Transmit buffer empty flag.

enumerator kFLEXIO_I2S_RxDataRegFullFlag: Receive buffer full flag.

enum _flexio_i2s_sample_rate

Audio sample rate.

Values:

enumerator kFLEXIO_I2S_SampleRate8KHz: Sample rate 8000Hz

enumerator kFLEXIO_I2S_SampleRate11025Hz: Sample rate 11025Hz

enumerator kFLEXIO_I2S_SampleRate12KHz: Sample rate 12000Hz

enumerator kFLEXIO_I2S_SampleRate16KHz: Sample rate 16000Hz

enumerator kFLEXIO_I2S_SampleRate22050Hz: Sample rate 22050Hz

enumerator kFLEXIO_I2S_SampleRate24KHz: Sample rate 24000Hz

enumerator kFLEXIO_I2S_SampleRate32KHz: Sample rate 32000Hz

enumerator kFLEXIO_I2S_SampleRate44100Hz: Sample rate 44100Hz

enumerator kFLEXIO_I2S_SampleRate48KHz: Sample rate 48000Hz

enumerator kFLEXIO_I2S_SampleRate96KHz: Sample rate 96000Hz

enum _flexio_i2s_word_width

Audio word width.

Values:

enumerator kFLEXIO_I2S_WordWidth8bits: Audio data width 8 bits

enumerator kFLEXIO_I2S_WordWidth16bits: Audio data width 16 bits

enumerator kFLEXIO_I2S_WordWidth24bits: Audio data width 24 bits

enumerator kFLEXIO_I2S_WordWidth32bits: Audio data width 32 bits

typedef struct _flexio_i2s_type FLEXIO_I2S_Type: Define FlexIO I2S access structure typedef.

typedef enum _flexio_i2s_master_slave flexio_i2s_master_slave_t: Master or slave mode.

typedef struct _flexio_i2s_config flexio_i2s_config_t: FlexIO I2S configure structure.

typedef struct _flexio_i2s_format flexio_i2s_format_t: FlexIO I2S audio format, FlexIO I2S only support the same format in Tx and Rx.

typedef enum _flexio_i2s_sample_rate flexio_i2s_sample_rate_t: Audio sample rate.

typedef enum _flexio_i2s_word_width flexio_i2s_word_width_t: Audio word width.

typedef struct _flexio_i2s_transfer flexio_i2s_transfer_t: Define FlexIO I2S transfer structure.

typedef struct _flexio_i2s_handle flexio_i2s_handle_t

typedef void (*flexio_i2s_callback_t)(FLEXIO_I2S_Type *base, flexio_i2s_handle_t *handle, status_t status, void *userData): FlexIO I2S xfer callback prototype.

I2S_RETRY_TIMES: Retry times for waiting flag.

FLEXIO_I2S_XFER_QUEUE_SIZE: FlexIO I2S transfer queue size, user can refine it according to use case.

struct _flexio_i2s_type

#include <fsl_flexio_i2s.h>

Define FlexIO I2S access structure typedef.

Public Members

FLEXIO_Type *flexioBase: FlexIO base pointer

uint8_t txPinIndex: Tx data pin index in FlexIO pins

uint8_t rxPinIndex: Rx data pin index

uint8_t bclkPinIndex: Bit clock pin index

uint8_t fsPinIndex: Frame sync pin index

uint8_t txShifterIndex: Tx data shifter index

uint8_t rxShifterIndex: Rx data shifter index

uint8_t bclkTimerIndex: Bit clock timer index

uint8_t fsTimerIndex: Frame sync timer index

struct _flexio_i2s_config

#include <fsl_flexio_i2s.h>

FlexIO I2S configure structure.

Public Members

bool enableI2S: Enable FlexIO I2S

flexio_i2s_master_slave_t masterSlave: Master or slave

flexio_pin_polarity_t txPinPolarity: Tx data pin polarity, active high or low

flexio_pin_polarity_t rxPinPolarity: Rx data pin polarity

flexio_pin_polarity_t bclkPinPolarity: Bit clock pin polarity

flexio_pin_polarity_t fsPinPolarity: Frame sync pin polarity

flexio_shifter_timer_polarity_t txTimerPolarity: Tx data valid on bclk rising or falling edge

flexio_shifter_timer_polarity_t rxTimerPolarity: Rx data valid on bclk rising or falling edge

struct _flexio_i2s_format

#include <fsl_flexio_i2s.h>

FlexIO I2S audio format, FlexIO I2S only support the same format in Tx and Rx.

Public Members

uint8_t bitWidth: Bit width of audio data, always 8/16/24/32 bits

uint32_t sampleRate_Hz: Sample rate of the audio data

struct _flexio_i2s_transfer

#include <fsl_flexio_i2s.h>

Define FlexIO I2S transfer structure.

Public Members

uint8_t *data: Data buffer start pointer

size_t dataSize: Bytes to be transferred.

struct _flexio_i2s_handle

#include <fsl_flexio_i2s.h>

Define FlexIO I2S handle structure.

Public Members

uint32_t state: Internal state

flexio_i2s_callback_t callback: Callback function called at transfer event

void *userData: Callback parameter passed to callback function

uint8_t bitWidth: Bit width for transfer, 8/16/24/32bits

flexio_i2s_transfer_t queue[(4U)]: Transfer queue storing queued transfer

size_t transferSize[(4U)]: Data bytes need to transfer

volatile uint8_t queueUser: Index for user to queue transfer

volatile uint8_t queueDriver: Index for driver to get the transfer data and size

FlexIO MCU Interface LCD Driver#

status_t FLEXIO_MCULCD_Init(FLEXIO_MCULCD_Type *base, flexio_mculcd_config_t *config, uint32_t srcClock_Hz)

Ungates the FlexIO clock, resets the FlexIO module, configures the FlexIO MCULCD hardware, and configures the FlexIO MCULCD with FlexIO MCULCD configuration. The configuration structure can be filled by the user, or be set with default values by the FLEXIO_MCULCD_GetDefaultConfig.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type structure.
config – Pointer to the flexio_mculcd_config_t structure.
srcClock_Hz – FlexIO source clock in Hz.

Return values:

kStatus_Success – Initialization success.
kStatus_InvalidArgument – Initialization failed because of invalid argument.

void FLEXIO_MCULCD_Deinit(FLEXIO_MCULCD_Type *base)

Resets the FLEXIO_MCULCD timer and shifter configuration.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type.

void FLEXIO_MCULCD_GetDefaultConfig(flexio_mculcd_config_t *config)

Gets the default configuration to configure the FlexIO MCULCD.

The default configuration value is:

config->enable = true;
config->enableInDoze = false;
config->enableInDebug = true;
config->enableFastAccess = true;
config->baudRate_Bps = 96000000U;

Parameters:

config – Pointer to the flexio_mculcd_config_t structure.

uint32_t FLEXIO_MCULCD_GetStatusFlags(FLEXIO_MCULCD_Type *base)

Gets FlexIO MCULCD status flags.

Note

Don’t use this function with DMA APIs.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type structure.

Returns:

status flag; OR’ed value or the _flexio_mculcd_status_flags.

void FLEXIO_MCULCD_ClearStatusFlags(FLEXIO_MCULCD_Type *base, uint32_t mask)

Clears FlexIO MCULCD status flags.

Note

Don’t use this function with DMA APIs.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type structure.
mask – Status to clear, it is the OR’ed value of _flexio_mculcd_status_flags.

void FLEXIO_MCULCD_EnableInterrupts(FLEXIO_MCULCD_Type *base, uint32_t mask)

Enables the FlexIO MCULCD interrupt.

This function enables the FlexIO MCULCD interrupt.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type structure.
mask – Interrupts to enable, it is the OR’ed value of _flexio_mculcd_interrupt_enable.

void FLEXIO_MCULCD_DisableInterrupts(FLEXIO_MCULCD_Type *base, uint32_t mask)

Disables the FlexIO MCULCD interrupt.

This function disables the FlexIO MCULCD interrupt.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type structure.
mask – Interrupts to disable, it is the OR’ed value of _flexio_mculcd_interrupt_enable.

static inline void FLEXIO_MCULCD_EnableTxDMA(FLEXIO_MCULCD_Type *base, bool enable)

Enables/disables the FlexIO MCULCD transmit DMA.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type structure.
enable – True means enable DMA, false means disable DMA.

static inline void FLEXIO_MCULCD_EnableRxDMA(FLEXIO_MCULCD_Type *base, bool enable)

Enables/disables the FlexIO MCULCD receive DMA.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type structure.
enable – True means enable DMA, false means disable DMA.

static inline uint32_t FLEXIO_MCULCD_GetTxDataRegisterAddress(FLEXIO_MCULCD_Type *base)

Gets the FlexIO MCULCD transmit data register address.

This function returns the MCULCD data register address, which is mainly used by DMA/eDMA.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type structure.

Returns:

FlexIO MCULCD transmit data register address.

static inline uint32_t FLEXIO_MCULCD_GetRxDataRegisterAddress(FLEXIO_MCULCD_Type *base)

Gets the FlexIO MCULCD receive data register address.

This function returns the MCULCD data register address, which is mainly used by DMA/eDMA.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type structure.

Returns:

FlexIO MCULCD receive data register address.

status_t FLEXIO_MCULCD_SetBaudRate(FLEXIO_MCULCD_Type *base, uint32_t baudRate_Bps, uint32_t srcClock_Hz)

Set desired baud rate.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type structure.
baudRate_Bps – Desired baud rate in bit-per-second for all data lines combined.
srcClock_Hz – FLEXIO clock frequency in Hz.

Return values:

kStatus_Success – Set successfully.
kStatus_InvalidArgument – Could not set the baud rate.

void FLEXIO_MCULCD_SetSingleBeatWriteConfig(FLEXIO_MCULCD_Type *base)

Configures the FLEXIO MCULCD to multiple beats write mode.

At the begining multiple beats write operation, the FLEXIO MCULCD is configured to multiple beats write mode using this function. After write operation, the configuration is cleared by FLEXIO_MCULCD_ClearSingleBeatWriteConfig.

Note

This is an internal used function, upper layer should not use.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type.

void FLEXIO_MCULCD_ClearSingleBeatWriteConfig(FLEXIO_MCULCD_Type *base)

Clear the FLEXIO MCULCD multiple beats write mode configuration.

Clear the write configuration set by FLEXIO_MCULCD_SetSingleBeatWriteConfig.

Note

This is an internal used function, upper layer should not use.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type.

void FLEXIO_MCULCD_SetSingleBeatReadConfig(FLEXIO_MCULCD_Type *base)

Configures the FLEXIO MCULCD to multiple beats read mode.

At the begining or multiple beats read operation, the FLEXIO MCULCD is configured to multiple beats read mode using this function. After read operation, the configuration is cleared by FLEXIO_MCULCD_ClearSingleBeatReadConfig.

Note

This is an internal used function, upper layer should not use.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type.

void FLEXIO_MCULCD_ClearSingleBeatReadConfig(FLEXIO_MCULCD_Type *base)

Clear the FLEXIO MCULCD multiple beats read mode configuration.

Clear the read configuration set by FLEXIO_MCULCD_SetSingleBeatReadConfig.

Note

This is an internal used function, upper layer should not use.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type.

void FLEXIO_MCULCD_SetMultiBeatsWriteConfig(FLEXIO_MCULCD_Type *base)

Configures the FLEXIO MCULCD to multiple beats write mode.

Note

This is an internal used function, upper layer should not use.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type.

void FLEXIO_MCULCD_ClearMultiBeatsWriteConfig(FLEXIO_MCULCD_Type *base)

Clear the FLEXIO MCULCD multiple beats write mode configuration.

Clear the write configuration set by FLEXIO_MCULCD_SetMultBeatsWriteConfig.

Note

This is an internal used function, upper layer should not use.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type.

void FLEXIO_MCULCD_SetMultiBeatsReadConfig(FLEXIO_MCULCD_Type *base)

Configures the FLEXIO MCULCD to multiple beats read mode.

Note

This is an internal used function, upper layer should not use.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type.

void FLEXIO_MCULCD_ClearMultiBeatsReadConfig(FLEXIO_MCULCD_Type *base)

Clear the FLEXIO MCULCD multiple beats read mode configuration.

Clear the read configuration set by FLEXIO_MCULCD_SetMultBeatsReadConfig.

Note

This is an internal used function, upper layer should not use.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type.

static inline void FLEXIO_MCULCD_Enable(FLEXIO_MCULCD_Type *base, bool enable)

Enables/disables the FlexIO MCULCD module operation.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type.
enable – True to enable, false does not have any effect.

uint32_t FLEXIO_MCULCD_ReadData(FLEXIO_MCULCD_Type *base)

Read data from the FLEXIO MCULCD RX shifter buffer.

Read data from the RX shift buffer directly, it does no check whether the buffer is empty or not.

If the data bus width is 8-bit:

uint8_t value;
value = (uint8_t)FLEXIO_MCULCD_ReadData(base);

If the data bus width is 16-bit:

uint16_t value;
value = (uint16_t)FLEXIO_MCULCD_ReadData(base);

Note

This function returns the RX shifter buffer value (32-bit) directly. The return value should be converted according to data bus width.

Note

Don’t use this function with DMA APIs.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type structure.

Returns:

The data read out.

static inline void FLEXIO_MCULCD_WriteData(FLEXIO_MCULCD_Type *base, uint32_t data)

Write data into the FLEXIO MCULCD TX shifter buffer.

Write data into the TX shift buffer directly, it does no check whether the buffer is full or not.

Note

Don’t use this function with DMA APIs.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type structure.
data – The data to write.

static inline void FLEXIO_MCULCD_StartTransfer(FLEXIO_MCULCD_Type *base)

Assert the nCS to start transfer.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type structure.

static inline void FLEXIO_MCULCD_StopTransfer(FLEXIO_MCULCD_Type *base)

De-assert the nCS to stop transfer.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type structure.

void FLEXIO_MCULCD_WaitTransmitComplete(void)

Wait for transmit data send out finished.

Currently there is no effective method to wait for the data send out from the shiter, so here use a while loop to wait.

Note

This is an internal used function.

void FLEXIO_MCULCD_WriteCommandBlocking(FLEXIO_MCULCD_Type *base, uint32_t command)

Send command in blocking way.

This function sends the command and returns when the command has been sent out.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type structure.
command – The command to send.

void FLEXIO_MCULCD_WriteDataArrayBlocking(FLEXIO_MCULCD_Type *base, const void *data, size_t size)

Send data array in blocking way.

This function sends the data array and returns when the data sent out.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type structure.
data – The data array to send.
size – How many bytes to write.

void FLEXIO_MCULCD_ReadDataArrayBlocking(FLEXIO_MCULCD_Type *base, void *data, size_t size)

Read data into array in blocking way.

This function reads the data into array and returns when the data read finished.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type structure.
data – The array to save the data.
size – How many bytes to read.

void FLEXIO_MCULCD_WriteSameValueBlocking(FLEXIO_MCULCD_Type *base, uint32_t sameValue, size_t size)

Send the same value many times in blocking way.

This function sends the same value many times. It could be used to clear the LCD screen. If the data bus width is 8, this function will send LSB 8 bits of sameValue for size times. If the data bus is 16, this function will send LSB 16 bits of sameValue for size / 2 times.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type structure.
sameValue – The same value to send.
size – How many bytes to send.

void FLEXIO_MCULCD_TransferBlocking(FLEXIO_MCULCD_Type *base, flexio_mculcd_transfer_t *xfer)

Performs a polling transfer.

Note

The API does not return until the transfer finished.

Parameters:

base – pointer to FLEXIO_MCULCD_Type structure.
xfer – pointer to flexio_mculcd_transfer_t structure.

status_t FLEXIO_MCULCD_TransferCreateHandle(FLEXIO_MCULCD_Type *base, flexio_mculcd_handle_t *handle, flexio_mculcd_transfer_callback_t callback, void *userData)

Initializes the FlexIO MCULCD handle, which is used in transactional functions.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type structure.
handle – Pointer to the flexio_mculcd_handle_t structure to store the transfer state.
callback – The callback function.
userData – The parameter of the callback function.

Return values:

kStatus_Success – Successfully create the handle.
kStatus_OutOfRange – The FlexIO type/handle/ISR table out of range.

status_t FLEXIO_MCULCD_TransferNonBlocking(FLEXIO_MCULCD_Type *base, flexio_mculcd_handle_t *handle, flexio_mculcd_transfer_t *xfer)

Transfer data using IRQ.

This function sends data using IRQ. This is a non-blocking function, which returns right away. When all data is sent out/received, the callback function is called.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type structure.
handle – Pointer to the flexio_mculcd_handle_t structure to store the transfer state.
xfer – FlexIO MCULCD transfer structure. See flexio_mculcd_transfer_t.

Return values:

kStatus_Success – Successfully start a transfer.
kStatus_InvalidArgument – Input argument is invalid.
kStatus_FLEXIO_MCULCD_Busy – MCULCD is busy with another transfer.

void FLEXIO_MCULCD_TransferAbort(FLEXIO_MCULCD_Type *base, flexio_mculcd_handle_t *handle)

Aborts the data transfer, which used IRQ.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type structure.
handle – Pointer to the flexio_mculcd_handle_t structure to store the transfer state.

status_t FLEXIO_MCULCD_TransferGetCount(FLEXIO_MCULCD_Type *base, flexio_mculcd_handle_t *handle, size_t *count)

Gets the data transfer status which used IRQ.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type structure.
handle – Pointer to the flexio_mculcd_handle_t structure to store the transfer state.
count – How many bytes transferred so far by the non-blocking transaction.

Return values:

kStatus_Success – Get the transferred count Successfully.
kStatus_NoTransferInProgress – No transfer in process.

void FLEXIO_MCULCD_TransferHandleIRQ(void *base, void *handle)

FlexIO MCULCD IRQ handler function.

Parameters:

base – Pointer to the FLEXIO_MCULCD_Type structure.
handle – Pointer to the flexio_mculcd_handle_t structure to store the transfer state.

FSL_FLEXIO_MCULCD_DRIVER_VERSION: FlexIO MCULCD driver version.

FlexIO LCD transfer status.

Values:

enumerator kStatus_FLEXIO_MCULCD_Idle: FlexIO LCD is idle.

enumerator kStatus_FLEXIO_MCULCD_Busy: FlexIO LCD is busy

enumerator kStatus_FLEXIO_MCULCD_Error: FlexIO LCD error occurred

enum _flexio_mculcd_pixel_format

Define FlexIO MCULCD pixel format.

Values:

enumerator kFLEXIO_MCULCD_RGB565: RGB565, 16-bit.

enumerator kFLEXIO_MCULCD_BGR565: BGR565, 16-bit.

enumerator kFLEXIO_MCULCD_RGB888: RGB888, 24-bit.

enumerator kFLEXIO_MCULCD_BGR888: BGR888, 24-bit.

enum _flexio_mculcd_bus

Define FlexIO MCULCD bus type.

Values:

enumerator kFLEXIO_MCULCD_8080: Using Intel 8080 bus.

enumerator kFLEXIO_MCULCD_6800: Using Motorola 6800 bus.

enum _flexio_mculcd_interrupt_enable

Define FlexIO MCULCD interrupt mask.

Values:

enumerator kFLEXIO_MCULCD_TxEmptyInterruptEnable: Transmit buffer empty interrupt enable.

enumerator kFLEXIO_MCULCD_RxFullInterruptEnable: Receive buffer full interrupt enable.

enum _flexio_mculcd_status_flags

Define FlexIO MCULCD status mask.

Values:

enumerator kFLEXIO_MCULCD_TxEmptyFlag: Transmit buffer empty flag.

enumerator kFLEXIO_MCULCD_RxFullFlag: Receive buffer full flag.

enum _flexio_mculcd_dma_enable

Define FlexIO MCULCD DMA mask.

Values:

enumerator kFLEXIO_MCULCD_TxDmaEnable: Tx DMA request source

enumerator kFLEXIO_MCULCD_RxDmaEnable: Rx DMA request source

enum _flexio_mculcd_transfer_mode

Transfer mode.

Values:

enumerator kFLEXIO_MCULCD_ReadArray: Read data into an array.

enumerator kFLEXIO_MCULCD_WriteArray: Write data from an array.

enumerator kFLEXIO_MCULCD_WriteSameValue: Write the same value many times.

typedef enum _flexio_mculcd_pixel_format flexio_mculcd_pixel_format_t: Define FlexIO MCULCD pixel format.

typedef enum _flexio_mculcd_bus flexio_mculcd_bus_t: Define FlexIO MCULCD bus type.

typedef void (*flexio_mculcd_pin_func_t)(bool set): Function to set or clear the CS and RS pin.

typedef struct _flexio_mculcd_type FLEXIO_MCULCD_Type: Define FlexIO MCULCD access structure typedef.

typedef struct _flexio_mculcd_config flexio_mculcd_config_t: Define FlexIO MCULCD configuration structure.

typedef enum _flexio_mculcd_transfer_mode flexio_mculcd_transfer_mode_t: Transfer mode.

typedef struct _flexio_mculcd_transfer flexio_mculcd_transfer_t: Define FlexIO MCULCD transfer structure.

typedef struct _flexio_mculcd_handle flexio_mculcd_handle_t: typedef for flexio_mculcd_handle_t in advance.

typedef void (*flexio_mculcd_transfer_callback_t)(FLEXIO_MCULCD_Type *base, flexio_mculcd_handle_t *handle, status_t status, void *userData)

FlexIO MCULCD callback for finished transfer.

When transfer finished, the callback function is called and returns the status as kStatus_FLEXIO_MCULCD_Idle.

FLEXIO_MCULCD_WAIT_COMPLETE_TIME

The delay time to wait for FLEXIO transmit complete.

Currently there is no method to detect whether the data has been sent out from the shifter, so the driver use a software delay for this. When the data is written to shifter buffer, the driver call the delay function to wait for the data shift out. If this value is too small, then the last few bytes might be lost when writing data using interrupt method or DMA method.

FLEXIO_MCULCD_DATA_BUS_WIDTH: The data bus width, must be 8 or 16.

FLEXIO_MCULCD_LEGACY_GPIO_FUNC

Whether to use legacy GPIO functions to control the CS/RS/RDWR pin signal.

If using the legacy pin functions, there is no user defined argument passed to the function.

struct _flexio_mculcd_type

#include <fsl_flexio_mculcd.h>

Define FlexIO MCULCD access structure typedef.

Public Members

FLEXIO_Type *flexioBase: FlexIO base pointer.

flexio_mculcd_bus_t busType: The bus type, 8080 or 6800.

uint8_t dataPinStartIndex: Start index of the data pin, the FlexIO pin dataPinStartIndex to (dataPinStartIndex + FLEXIO_MCULCD_DATA_BUS_WIDTH -1) will be used for data transfer. Only support data bus width 8 and 16.

uint8_t ENWRPinIndex: Pin select for WR(8080 mode), EN(6800 mode).

uint8_t RDPinIndex: Pin select for RD(8080 mode), not used in 6800 mode.

uint8_t txShifterStartIndex: Start index of shifters used for data write, it must be 0 or 4.

uint8_t txShifterEndIndex: End index of shifters used for data write.

uint8_t rxShifterStartIndex: Start index of shifters used for data read.

uint8_t rxShifterEndIndex: End index of shifters used for data read, it must be 3 or 7.

uint8_t timerIndex: Timer index used in FlexIO MCULCD.

flexio_mculcd_pin_func_t setCSPin: Function to set or clear the CS pin.

flexio_mculcd_pin_func_t setRSPin: Function to set or clear the RS pin.

flexio_mculcd_pin_func_t setRDWRPin: Function to set or clear the RD/WR pin, only used in 6800 mode.

struct _flexio_mculcd_config

#include <fsl_flexio_mculcd.h>

Define FlexIO MCULCD configuration structure.

Public Members

bool enable: Enable/disable FlexIO MCULCD after configuration.

bool enableInDoze: Enable/disable FlexIO operation in doze mode.

bool enableInDebug: Enable/disable FlexIO operation in debug mode.

bool enableFastAccess: Enable/disable fast access to FlexIO registers, fast access requires the FlexIO clock to be at least twice the frequency of the bus clock.

uint32_t baudRate_Bps: Baud rate in bit-per-second for all data lines combined.

struct _flexio_mculcd_transfer

#include <fsl_flexio_mculcd.h>

Define FlexIO MCULCD transfer structure.

Public Members

uint32_t command: Command to send.

uint32_t dataAddrOrSameValue: When sending the same value for many times, this is the value to send. When writing or reading array, this is the address of the data array.

size_t dataSize: How many bytes to transfer.

flexio_mculcd_transfer_mode_t mode: Transfer mode.

bool dataOnly: Send data only when tx without the command.

struct _flexio_mculcd_handle

#include <fsl_flexio_mculcd.h>

Define FlexIO MCULCD handle structure.

Public Members

uint32_t dataAddrOrSameValue: When sending the same value for many times, this is the value to send. When writing or reading array, this is the address of the data array.

size_t dataCount: Total count to be transferred.

volatile size_t remainingCount: Remaining count to transfer.

volatile uint32_t state: FlexIO MCULCD internal state.

flexio_mculcd_transfer_callback_t completionCallback: FlexIO MCULCD transfer completed callback.

void *userData: Callback parameter.

FlexIO SPI Driver#

void FLEXIO_SPI_MasterInit(FLEXIO_SPI_Type *base, flexio_spi_master_config_t *masterConfig, uint32_t srcClock_Hz)

Ungates the FlexIO clock, resets the FlexIO module, configures the FlexIO SPI master hardware, and configures the FlexIO SPI with FlexIO SPI master configuration. The configuration structure can be filled by the user, or be set with default values by the FLEXIO_SPI_MasterGetDefaultConfig().

Example

FLEXIO_SPI_Type spiDev = {
.flexioBase = FLEXIO,
.SDOPinIndex = 0,
.SDIPinIndex = 1,
.SCKPinIndex = 2,
.CSnPinIndex = 3,
.shifterIndex = {0,1},
.timerIndex = {0,1}
};
flexio_spi_master_config_t config = {
.enableMaster = true,
.enableInDoze = false,
.enableInDebug = true,
.enableFastAccess = false,
.baudRate_Bps = 500000,
.phase = kFLEXIO_SPI_ClockPhaseFirstEdge,
.direction = kFLEXIO_SPI_MsbFirst,
.dataMode = kFLEXIO_SPI_8BitMode
};
FLEXIO_SPI_MasterInit(&spiDev, &config, srcClock_Hz);

Note

1.FlexIO SPI master only support CPOL = 0, which means clock inactive low. 2.For FlexIO SPI master, the input valid time is 1.5 clock cycles, for slave the output valid time is 2.5 clock cycles. So if FlexIO SPI master communicates with other spi IPs, the maximum baud rate is FlexIO clock frequency divided by 2*2=4. If FlexIO SPI master communicates with FlexIO SPI slave, the maximum baud rate is FlexIO clock frequency divided by (1.5+2.5)*2=8.

Parameters:

base – Pointer to the FLEXIO_SPI_Type structure.
masterConfig – Pointer to the flexio_spi_master_config_t structure.
srcClock_Hz – FlexIO source clock in Hz.

void FLEXIO_SPI_MasterDeinit(FLEXIO_SPI_Type *base)

Resets the FlexIO SPI timer and shifter config.

Parameters:

base – Pointer to the FLEXIO_SPI_Type.

void FLEXIO_SPI_MasterGetDefaultConfig(flexio_spi_master_config_t *masterConfig)

Gets the default configuration to configure the FlexIO SPI master. The configuration can be used directly by calling the FLEXIO_SPI_MasterConfigure(). Example:

flexio_spi_master_config_t masterConfig;
FLEXIO_SPI_MasterGetDefaultConfig(&masterConfig);

Parameters:

masterConfig – Pointer to the flexio_spi_master_config_t structure.

void FLEXIO_SPI_SlaveInit(FLEXIO_SPI_Type *base, flexio_spi_slave_config_t *slaveConfig)

Ungates the FlexIO clock, resets the FlexIO module, configures the FlexIO SPI slave hardware configuration, and configures the FlexIO SPI with FlexIO SPI slave configuration. The configuration structure can be filled by the user, or be set with default values by the FLEXIO_SPI_SlaveGetDefaultConfig().

Note

1.Only one timer is needed in the FlexIO SPI slave. As a result, the second timer index is ignored. 2.FlexIO SPI slave only support CPOL = 0, which means clock inactive low. 3.For FlexIO SPI master, the input valid time is 1.5 clock cycles, for slave the output valid time is 2.5 clock cycles. So if FlexIO SPI slave communicates with other spi IPs, the maximum baud rate is FlexIO clock frequency divided by 3*2=6. If FlexIO SPI slave communicates with FlexIO SPI master, the maximum baud rate is FlexIO clock frequency divided by (1.5+2.5)*2=8. Example

FLEXIO_SPI_Type spiDev = {
.flexioBase = FLEXIO,
.SDOPinIndex = 0,
.SDIPinIndex = 1,
.SCKPinIndex = 2,
.CSnPinIndex = 3,
.shifterIndex = {0,1},
.timerIndex = {0}
};
flexio_spi_slave_config_t config = {
.enableSlave = true,
.enableInDoze = false,
.enableInDebug = true,
.enableFastAccess = false,
.phase = kFLEXIO_SPI_ClockPhaseFirstEdge,
.direction = kFLEXIO_SPI_MsbFirst,
.dataMode = kFLEXIO_SPI_8BitMode
};
FLEXIO_SPI_SlaveInit(&spiDev, &config);

Parameters:

base – Pointer to the FLEXIO_SPI_Type structure.
slaveConfig – Pointer to the flexio_spi_slave_config_t structure.

void FLEXIO_SPI_SlaveDeinit(FLEXIO_SPI_Type *base)

Gates the FlexIO clock.

Parameters:

base – Pointer to the FLEXIO_SPI_Type.

void FLEXIO_SPI_SlaveGetDefaultConfig(flexio_spi_slave_config_t *slaveConfig)

Gets the default configuration to configure the FlexIO SPI slave. The configuration can be used directly for calling the FLEXIO_SPI_SlaveConfigure(). Example:

flexio_spi_slave_config_t slaveConfig;
FLEXIO_SPI_SlaveGetDefaultConfig(&slaveConfig);

Parameters:

slaveConfig – Pointer to the flexio_spi_slave_config_t structure.

uint32_t FLEXIO_SPI_GetStatusFlags(FLEXIO_SPI_Type *base)

Gets FlexIO SPI status flags.

Parameters:

base – Pointer to the FLEXIO_SPI_Type structure.

Returns:

status flag; Use the status flag to AND the following flag mask and get the status.

kFLEXIO_SPI_TxEmptyFlag
kFLEXIO_SPI_RxEmptyFlag

void FLEXIO_SPI_ClearStatusFlags(FLEXIO_SPI_Type *base, uint32_t mask)

Clears FlexIO SPI status flags.

Parameters:

base – Pointer to the FLEXIO_SPI_Type structure.
mask – status flag The parameter can be any combination of the following values:
- kFLEXIO_SPI_TxEmptyFlag
- kFLEXIO_SPI_RxEmptyFlag

void FLEXIO_SPI_EnableInterrupts(FLEXIO_SPI_Type *base, uint32_t mask)

Enables the FlexIO SPI interrupt.

This function enables the FlexIO SPI interrupt.

Parameters:

base – Pointer to the FLEXIO_SPI_Type structure.
mask – interrupt source. The parameter can be any combination of the following values:
- kFLEXIO_SPI_RxFullInterruptEnable
- kFLEXIO_SPI_TxEmptyInterruptEnable

void FLEXIO_SPI_DisableInterrupts(FLEXIO_SPI_Type *base, uint32_t mask)

Disables the FlexIO SPI interrupt.

This function disables the FlexIO SPI interrupt.

Parameters:

base – Pointer to the FLEXIO_SPI_Type structure.
mask – interrupt source The parameter can be any combination of the following values:
- kFLEXIO_SPI_RxFullInterruptEnable
- kFLEXIO_SPI_TxEmptyInterruptEnable

void FLEXIO_SPI_EnableDMA(FLEXIO_SPI_Type *base, uint32_t mask, bool enable)

Enables/disables the FlexIO SPI transmit DMA. This function enables/disables the FlexIO SPI Tx DMA, which means that asserting the kFLEXIO_SPI_TxEmptyFlag does/doesn’t trigger the DMA request.

Parameters:

base – Pointer to the FLEXIO_SPI_Type structure.
mask – SPI DMA source.
enable – True means enable DMA, false means disable DMA.

static inline uint32_t FLEXIO_SPI_GetTxDataRegisterAddress(FLEXIO_SPI_Type *base, flexio_spi_shift_direction_t direction)

Gets the FlexIO SPI transmit data register address for MSB first transfer.

This function returns the SPI data register address, which is mainly used by DMA/eDMA.

Parameters:

base – Pointer to the FLEXIO_SPI_Type structure.
direction – Shift direction of MSB first or LSB first.

Returns:

FlexIO SPI transmit data register address.

static inline uint32_t FLEXIO_SPI_GetRxDataRegisterAddress(FLEXIO_SPI_Type *base, flexio_spi_shift_direction_t direction)

Gets the FlexIO SPI receive data register address for the MSB first transfer.

This function returns the SPI data register address, which is mainly used by DMA/eDMA.

Parameters:

base – Pointer to the FLEXIO_SPI_Type structure.
direction – Shift direction of MSB first or LSB first.

Returns:

FlexIO SPI receive data register address.

static inline void FLEXIO_SPI_Enable(FLEXIO_SPI_Type *base, bool enable)

Enables/disables the FlexIO SPI module operation.

Parameters:

base – Pointer to the FLEXIO_SPI_Type.
enable – True to enable, false does not have any effect.

void FLEXIO_SPI_MasterSetBaudRate(FLEXIO_SPI_Type *base, uint32_t baudRate_Bps, uint32_t srcClockHz)

Sets baud rate for the FlexIO SPI transfer, which is only used for the master.

Parameters:

base – Pointer to the FLEXIO_SPI_Type structure.
baudRate_Bps – Baud Rate needed in Hz.
srcClockHz – SPI source clock frequency in Hz.

static inline void FLEXIO_SPI_WriteData(FLEXIO_SPI_Type *base, flexio_spi_shift_direction_t direction, uint32_t data)

Writes one byte of data, which is sent using the MSB method.

Note

Parameters:

base – Pointer to the FLEXIO_SPI_Type structure.
direction – Shift direction of MSB first or LSB first.
data – 8/16/32 bit data.

static inline uint32_t FLEXIO_SPI_ReadData(FLEXIO_SPI_Type *base, flexio_spi_shift_direction_t direction)

Reads 8 bit/16 bit data.

Note

This is a non-blocking API, which returns directly after the data is read from the data register. Ensure that the RxFullFlag is asserted before calling this API.

Parameters:

base – Pointer to the FLEXIO_SPI_Type structure.
direction – Shift direction of MSB first or LSB first.

Returns:

8 bit/16 bit data received.

status_t FLEXIO_SPI_WriteBlocking(FLEXIO_SPI_Type *base, flexio_spi_shift_direction_t direction, const uint8_t *buffer, size_t size)

Sends a buffer of data bytes.

Note

This function blocks using the polling method until all bytes have been sent.

Parameters:

base – Pointer to the FLEXIO_SPI_Type structure.
direction – Shift direction of MSB first or LSB first.
buffer – The data bytes to send.
size – The number of data bytes to send.

Return values:

kStatus_Success – Successfully create the handle.
kStatus_FLEXIO_SPI_Timeout – The transfer timed out and was aborted.

status_t FLEXIO_SPI_ReadBlocking(FLEXIO_SPI_Type *base, flexio_spi_shift_direction_t direction, uint8_t *buffer, size_t size)

Receives a buffer of bytes.

Note

This function blocks using the polling method until all bytes have been received.

Parameters:

base – Pointer to the FLEXIO_SPI_Type structure.
direction – Shift direction of MSB first or LSB first.
buffer – The buffer to store the received bytes.
size – The number of data bytes to be received.

Return values:

kStatus_Success – Successfully create the handle.
kStatus_FLEXIO_SPI_Timeout – The transfer timed out and was aborted.

status_t FLEXIO_SPI_MasterTransferBlocking(FLEXIO_SPI_Type *base, flexio_spi_transfer_t *xfer)

Receives a buffer of bytes.

Note

This function blocks via polling until all bytes have been received.

Parameters:

base – pointer to FLEXIO_SPI_Type structure
xfer – FlexIO SPI transfer structure, see flexio_spi_transfer_t.

Return values:

kStatus_Success – Successfully create the handle.
kStatus_FLEXIO_SPI_Timeout – The transfer timed out and was aborted.

void FLEXIO_SPI_FlushShifters(FLEXIO_SPI_Type *base)

Flush tx/rx shifters.

Parameters:

base – Pointer to the FLEXIO_SPI_Type structure.

status_t FLEXIO_SPI_MasterTransferCreateHandle(FLEXIO_SPI_Type *base, flexio_spi_master_handle_t *handle, flexio_spi_master_transfer_callback_t callback, void *userData)

Initializes the FlexIO SPI Master handle, which is used in transactional functions.

Parameters:

base – Pointer to the FLEXIO_SPI_Type structure.
handle – Pointer to the flexio_spi_master_handle_t structure to store the transfer state.
callback – The callback function.
userData – The parameter of the callback function.

Return values:

kStatus_Success – Successfully create the handle.
kStatus_OutOfRange – The FlexIO type/handle/ISR table out of range.

status_t FLEXIO_SPI_MasterTransferNonBlocking(FLEXIO_SPI_Type *base, flexio_spi_master_handle_t *handle, flexio_spi_transfer_t *xfer)

Master transfer data using IRQ.

This function sends data using IRQ. This is a non-blocking function, which returns right away. When all data is sent out/received, the callback function is called.

Parameters:

base – Pointer to the FLEXIO_SPI_Type structure.
handle – Pointer to the flexio_spi_master_handle_t structure to store the transfer state.
xfer – FlexIO SPI transfer structure. See flexio_spi_transfer_t.

Return values:

kStatus_Success – Successfully start a transfer.
kStatus_InvalidArgument – Input argument is invalid.
kStatus_FLEXIO_SPI_Busy – SPI is not idle, is running another transfer.

void FLEXIO_SPI_MasterTransferAbort(FLEXIO_SPI_Type *base, flexio_spi_master_handle_t *handle)

Aborts the master data transfer, which used IRQ.

Parameters:

base – Pointer to the FLEXIO_SPI_Type structure.
handle – Pointer to the flexio_spi_master_handle_t structure to store the transfer state.

status_t FLEXIO_SPI_MasterTransferGetCount(FLEXIO_SPI_Type *base, flexio_spi_master_handle_t *handle, size_t *count)

Gets the data transfer status which used IRQ.

Parameters:

base – Pointer to the FLEXIO_SPI_Type structure.
handle – Pointer to the flexio_spi_master_handle_t structure to store the transfer state.
count – Number of bytes transferred so far by the non-blocking transaction.

Return values:

kStatus_InvalidArgument – count is Invalid.
kStatus_Success – Successfully return the count.

void FLEXIO_SPI_MasterTransferHandleIRQ(void *spiType, void *spiHandle)

FlexIO SPI master IRQ handler function.

Parameters:

spiType – Pointer to the FLEXIO_SPI_Type structure.
spiHandle – Pointer to the flexio_spi_master_handle_t structure to store the transfer state.

status_t FLEXIO_SPI_SlaveTransferCreateHandle(FLEXIO_SPI_Type *base, flexio_spi_slave_handle_t *handle, flexio_spi_slave_transfer_callback_t callback, void *userData)

Initializes the FlexIO SPI Slave handle, which is used in transactional functions.

Parameters:

base – Pointer to the FLEXIO_SPI_Type structure.
handle – Pointer to the flexio_spi_slave_handle_t structure to store the transfer state.
callback – The callback function.
userData – The parameter of the callback function.

Return values:

kStatus_Success – Successfully create the handle.
kStatus_OutOfRange – The FlexIO type/handle/ISR table out of range.

status_t FLEXIO_SPI_SlaveTransferNonBlocking(FLEXIO_SPI_Type *base, flexio_spi_slave_handle_t *handle, flexio_spi_transfer_t *xfer)

Slave transfer data using IRQ.

This function sends data using IRQ. This is a non-blocking function, which returns right away. When all data is sent out/received, the callback function is called.

Parameters:

handle – Pointer to the flexio_spi_slave_handle_t structure to store the transfer state.
base – Pointer to the FLEXIO_SPI_Type structure.
xfer – FlexIO SPI transfer structure. See flexio_spi_transfer_t.

Return values:

kStatus_Success – Successfully start a transfer.
kStatus_InvalidArgument – Input argument is invalid.
kStatus_FLEXIO_SPI_Busy – SPI is not idle; it is running another transfer.

static inline void FLEXIO_SPI_SlaveTransferAbort(FLEXIO_SPI_Type *base, flexio_spi_slave_handle_t *handle)

Aborts the slave data transfer which used IRQ, share same API with master.

Parameters:

base – Pointer to the FLEXIO_SPI_Type structure.
handle – Pointer to the flexio_spi_slave_handle_t structure to store the transfer state.

static inline status_t FLEXIO_SPI_SlaveTransferGetCount(FLEXIO_SPI_Type *base, flexio_spi_slave_handle_t *handle, size_t *count)

Gets the data transfer status which used IRQ, share same API with master.

Parameters:

base – Pointer to the FLEXIO_SPI_Type structure.
handle – Pointer to the flexio_spi_slave_handle_t structure to store the transfer state.
count – Number of bytes transferred so far by the non-blocking transaction.

Return values:

kStatus_InvalidArgument – count is Invalid.
kStatus_Success – Successfully return the count.

void FLEXIO_SPI_SlaveTransferHandleIRQ(void *spiType, void *spiHandle)

FlexIO SPI slave IRQ handler function.

Parameters:

spiType – Pointer to the FLEXIO_SPI_Type structure.
spiHandle – Pointer to the flexio_spi_slave_handle_t structure to store the transfer state.

FSL_FLEXIO_SPI_DRIVER_VERSION: FlexIO SPI driver version.

Error codes for the FlexIO SPI driver.

Values:

enumerator kStatus_FLEXIO_SPI_Busy: FlexIO SPI is busy.

enumerator kStatus_FLEXIO_SPI_Idle: SPI is idle

enumerator kStatus_FLEXIO_SPI_Error: FlexIO SPI error.

enumerator kStatus_FLEXIO_SPI_Timeout: FlexIO SPI timeout polling status flags.

enum _flexio_spi_clock_phase

FlexIO SPI clock phase configuration.

Values:

enumerator kFLEXIO_SPI_ClockPhaseFirstEdge: First edge on SPSCK occurs at the middle of the first cycle of a data transfer.

enumerator kFLEXIO_SPI_ClockPhaseSecondEdge: First edge on SPSCK occurs at the start of the first cycle of a data transfer.

enum _flexio_spi_shift_direction

FlexIO SPI data shifter direction options.

Values:

enumerator kFLEXIO_SPI_MsbFirst: Data transfers start with most significant bit.

enumerator kFLEXIO_SPI_LsbFirst: Data transfers start with least significant bit.

enum _flexio_spi_data_bitcount_mode

FlexIO SPI data length mode options.

Values:

enumerator kFLEXIO_SPI_8BitMode: 8-bit data transmission mode.

enumerator kFLEXIO_SPI_16BitMode: 16-bit data transmission mode.

enumerator kFLEXIO_SPI_32BitMode: 32-bit data transmission mode.

enum _flexio_spi_interrupt_enable

Define FlexIO SPI interrupt mask.

Values:

enumerator kFLEXIO_SPI_TxEmptyInterruptEnable: Transmit buffer empty interrupt enable.

enumerator kFLEXIO_SPI_RxFullInterruptEnable: Receive buffer full interrupt enable.

enum _flexio_spi_status_flags

Define FlexIO SPI status mask.

Values:

enumerator kFLEXIO_SPI_TxBufferEmptyFlag: Transmit buffer empty flag.

enumerator kFLEXIO_SPI_RxBufferFullFlag: Receive buffer full flag.

enum _flexio_spi_dma_enable

Define FlexIO SPI DMA mask.

Values:

enumerator kFLEXIO_SPI_TxDmaEnable: Tx DMA request source

enumerator kFLEXIO_SPI_RxDmaEnable: Rx DMA request source

enumerator kFLEXIO_SPI_DmaAllEnable: All DMA request source

enum _flexio_spi_transfer_flags

Define FlexIO SPI transfer flags.

Note

Use kFLEXIO_SPI_csContinuous and one of the other flags to OR together to form the transfer flag.

Values:

enumerator kFLEXIO_SPI_8bitMsb: FlexIO SPI 8-bit MSB first

enumerator kFLEXIO_SPI_8bitLsb: FlexIO SPI 8-bit LSB first

enumerator kFLEXIO_SPI_16bitMsb: FlexIO SPI 16-bit MSB first

enumerator kFLEXIO_SPI_16bitLsb: FlexIO SPI 16-bit LSB first

enumerator kFLEXIO_SPI_32bitMsb: FlexIO SPI 32-bit MSB first

enumerator kFLEXIO_SPI_32bitLsb: FlexIO SPI 32-bit LSB first

enumerator kFLEXIO_SPI_csContinuous: Enable the CS signal continuous mode

typedef enum _flexio_spi_clock_phase flexio_spi_clock_phase_t: FlexIO SPI clock phase configuration.

typedef enum _flexio_spi_shift_direction flexio_spi_shift_direction_t: FlexIO SPI data shifter direction options.

typedef enum _flexio_spi_data_bitcount_mode flexio_spi_data_bitcount_mode_t: FlexIO SPI data length mode options.

typedef struct _flexio_spi_type FLEXIO_SPI_Type: Define FlexIO SPI access structure typedef.

typedef struct _flexio_spi_master_config flexio_spi_master_config_t: Define FlexIO SPI master configuration structure.

typedef struct _flexio_spi_slave_config flexio_spi_slave_config_t: Define FlexIO SPI slave configuration structure.

typedef struct _flexio_spi_transfer flexio_spi_transfer_t: Define FlexIO SPI transfer structure.

typedef struct _flexio_spi_master_handle flexio_spi_master_handle_t: typedef for flexio_spi_master_handle_t in advance.

typedef flexio_spi_master_handle_t flexio_spi_slave_handle_t: Slave handle is the same with master handle.

typedef void (*flexio_spi_master_transfer_callback_t)(FLEXIO_SPI_Type *base, flexio_spi_master_handle_t *handle, status_t status, void *userData): FlexIO SPI master callback for finished transmit.

typedef void (*flexio_spi_slave_transfer_callback_t)(FLEXIO_SPI_Type *base, flexio_spi_slave_handle_t *handle, status_t status, void *userData): FlexIO SPI slave callback for finished transmit.

FLEXIO_SPI_DUMMYDATA: FlexIO SPI dummy transfer data, the data is sent while txData is NULL.

SPI_RETRY_TIMES: Retry times for waiting flag.

FLEXIO_SPI_XFER_DATA_FORMAT(flag): Get the transfer data format of width and bit order.

struct _flexio_spi_type

#include <fsl_flexio_spi.h>

Define FlexIO SPI access structure typedef.

Public Members

FLEXIO_Type *flexioBase: FlexIO base pointer.

uint8_t SDOPinIndex: Pin select for data output. To set SDO pin in Hi-Z state, user needs to mux the pin as GPIO input and disable all pull up/down in application.

uint8_t SDIPinIndex: Pin select for data input.

uint8_t SCKPinIndex: Pin select for clock.

uint8_t CSnPinIndex: Pin select for enable.

uint8_t shifterIndex[2]: Shifter index used in FlexIO SPI.

uint8_t timerIndex[2]: Timer index used in FlexIO SPI.

struct _flexio_spi_master_config

#include <fsl_flexio_spi.h>

Define FlexIO SPI master configuration structure.

Public Members

bool enableMaster: Enable/disable FlexIO SPI master after configuration.

bool enableInDoze: Enable/disable FlexIO operation in doze mode.

bool enableInDebug: Enable/disable FlexIO operation in debug mode.

bool enableFastAccess: Enable/disable fast access to FlexIO registers, fast access requires the FlexIO clock to be at least twice the frequency of the bus clock.

uint32_t baudRate_Bps: Baud rate in Bps.

flexio_spi_clock_phase_t phase: Clock phase.

flexio_spi_data_bitcount_mode_t dataMode: 8bit or 16bit mode.

struct _flexio_spi_slave_config

#include <fsl_flexio_spi.h>

Define FlexIO SPI slave configuration structure.

Public Members

bool enableSlave: Enable/disable FlexIO SPI slave after configuration.

bool enableInDoze: Enable/disable FlexIO operation in doze mode.

bool enableInDebug: Enable/disable FlexIO operation in debug mode.

bool enableFastAccess: Enable/disable fast access to FlexIO registers, fast access requires the FlexIO clock to be at least twice the frequency of the bus clock.

flexio_spi_clock_phase_t phase: Clock phase.

flexio_spi_data_bitcount_mode_t dataMode: 8bit or 16bit mode.

struct _flexio_spi_transfer

#include <fsl_flexio_spi.h>

Define FlexIO SPI transfer structure.

Public Members

const uint8_t *txData: Send buffer.

uint8_t *rxData: Receive buffer.

size_t dataSize: Transfer bytes.

uint8_t flags: FlexIO SPI control flag, MSB first or LSB first.

struct _flexio_spi_master_handle

#include <fsl_flexio_spi.h>

Define FlexIO SPI handle structure.

Public Members

const uint8_t *txData: Transfer buffer.

uint8_t *rxData: Receive buffer.

size_t transferSize: Total bytes to be transferred.

volatile size_t txRemainingBytes: Send data remaining in bytes.

volatile size_t rxRemainingBytes: Receive data remaining in bytes.

volatile uint32_t state: FlexIO SPI internal state.

uint8_t bytePerFrame: SPI mode, 2bytes or 1byte in a frame

flexio_spi_shift_direction_t direction: Shift direction.

flexio_spi_master_transfer_callback_t callback: FlexIO SPI callback.

void *userData: Callback parameter.

bool isCsContinuous: Is current transfer using CS continuous mode.

uint32_t timer1Cfg: TIMER1 TIMCFG regiser value backup.

FlexIO UART Driver#

status_t FLEXIO_UART_Init(FLEXIO_UART_Type *base, const flexio_uart_config_t *userConfig, uint32_t srcClock_Hz)

Ungates the FlexIO clock, resets the FlexIO module, configures FlexIO UART hardware, and configures the FlexIO UART with FlexIO UART configuration. The configuration structure can be filled by the user or be set with default values by FLEXIO_UART_GetDefaultConfig().

Example

FLEXIO_UART_Type base = {
.flexioBase = FLEXIO,
.TxPinIndex = 0,
.RxPinIndex = 1,
.shifterIndex = {0,1},
.timerIndex = {0,1}
};
flexio_uart_config_t config = {
.enableInDoze = false,
.enableInDebug = true,
.enableFastAccess = false,
.baudRate_Bps = 115200U,
.bitCountPerChar = 8
};
FLEXIO_UART_Init(base, &config, srcClock_Hz);

Parameters:

base – Pointer to the FLEXIO_UART_Type structure.
userConfig – Pointer to the flexio_uart_config_t structure.
srcClock_Hz – FlexIO source clock in Hz.

Return values:

kStatus_Success – Configuration success.
kStatus_FLEXIO_UART_BaudrateNotSupport – Baudrate is not supported for current clock source frequency.

void FLEXIO_UART_Deinit(FLEXIO_UART_Type *base)

Resets the FlexIO UART shifter and timer config.

Note

After calling this API, call the FLEXO_UART_Init to use the FlexIO UART module.

Parameters:

base – Pointer to FLEXIO_UART_Type structure

void FLEXIO_UART_GetDefaultConfig(flexio_uart_config_t *userConfig)

Gets the default configuration to configure the FlexIO UART. The configuration can be used directly for calling the FLEXIO_UART_Init(). Example:

flexio_uart_config_t config;
FLEXIO_UART_GetDefaultConfig(&userConfig);

Parameters:

userConfig – Pointer to the flexio_uart_config_t structure.

uint32_t FLEXIO_UART_GetStatusFlags(FLEXIO_UART_Type *base)

Gets the FlexIO UART status flags.

Parameters:

base – Pointer to the FLEXIO_UART_Type structure.

Returns:

FlexIO UART status flags.

void FLEXIO_UART_ClearStatusFlags(FLEXIO_UART_Type *base, uint32_t mask)

Gets the FlexIO UART status flags.

Parameters:

base – Pointer to the FLEXIO_UART_Type structure.
mask – Status flag. The parameter can be any combination of the following values:
- kFLEXIO_UART_TxDataRegEmptyFlag
- kFLEXIO_UART_RxEmptyFlag
- kFLEXIO_UART_RxOverRunFlag

void FLEXIO_UART_EnableInterrupts(FLEXIO_UART_Type *base, uint32_t mask)

Enables the FlexIO UART interrupt.

This function enables the FlexIO UART interrupt.

Parameters:

base – Pointer to the FLEXIO_UART_Type structure.
mask – Interrupt source.

void FLEXIO_UART_DisableInterrupts(FLEXIO_UART_Type *base, uint32_t mask)

Disables the FlexIO UART interrupt.

This function disables the FlexIO UART interrupt.

Parameters:

base – Pointer to the FLEXIO_UART_Type structure.
mask – Interrupt source.

static inline uint32_t FLEXIO_UART_GetTxDataRegisterAddress(FLEXIO_UART_Type *base)

Gets the FlexIO UARt transmit data register address.

This function returns the UART data register address, which is mainly used by DMA/eDMA.

Parameters:

base – Pointer to the FLEXIO_UART_Type structure.

Returns:

FlexIO UART transmit data register address.

static inline uint32_t FLEXIO_UART_GetRxDataRegisterAddress(FLEXIO_UART_Type *base)

Gets the FlexIO UART receive data register address.

This function returns the UART data register address, which is mainly used by DMA/eDMA.

Parameters:

base – Pointer to the FLEXIO_UART_Type structure.

Returns:

FlexIO UART receive data register address.

static inline void FLEXIO_UART_EnableTxDMA(FLEXIO_UART_Type *base, bool enable)

Enables/disables the FlexIO UART transmit DMA. This function enables/disables the FlexIO UART Tx DMA, which means asserting the kFLEXIO_UART_TxDataRegEmptyFlag does/doesn’t trigger the DMA request.

Parameters:

base – Pointer to the FLEXIO_UART_Type structure.
enable – True to enable, false to disable.

static inline void FLEXIO_UART_EnableRxDMA(FLEXIO_UART_Type *base, bool enable)

Enables/disables the FlexIO UART receive DMA. This function enables/disables the FlexIO UART Rx DMA, which means asserting kFLEXIO_UART_RxDataRegFullFlag does/doesn’t trigger the DMA request.

Parameters:

base – Pointer to the FLEXIO_UART_Type structure.
enable – True to enable, false to disable.

static inline void FLEXIO_UART_Enable(FLEXIO_UART_Type *base, bool enable)

Enables/disables the FlexIO UART module operation.

Parameters:

base – Pointer to the FLEXIO_UART_Type.
enable – True to enable, false does not have any effect.

static inline void FLEXIO_UART_WriteByte(FLEXIO_UART_Type *base, const uint8_t *buffer)

Writes one byte of data.

Note

This is a non-blocking API, which returns directly after the data is put into the data register. Ensure that the TxEmptyFlag is asserted before calling this API.

Parameters:

base – Pointer to the FLEXIO_UART_Type structure.
buffer – The data bytes to send.

static inline void FLEXIO_UART_ReadByte(FLEXIO_UART_Type *base, uint8_t *buffer)

Reads one byte of data.

Note

This is a non-blocking API, which returns directly after the data is read from the data register. Ensure that the RxFullFlag is asserted before calling this API.

Parameters:

base – Pointer to the FLEXIO_UART_Type structure.
buffer – The buffer to store the received bytes.

status_t FLEXIO_UART_WriteBlocking(FLEXIO_UART_Type *base, const uint8_t *txData, size_t txSize)

Sends a buffer of data bytes.

Note

This function blocks using the polling method until all bytes have been sent.

Parameters:

base – Pointer to the FLEXIO_UART_Type structure.
txData – The data bytes to send.
txSize – The number of data bytes to send.

Return values:

kStatus_FLEXIO_UART_Timeout – Transmission timed out and was aborted.
kStatus_Success – Successfully wrote all data.

status_t FLEXIO_UART_ReadBlocking(FLEXIO_UART_Type *base, uint8_t *rxData, size_t rxSize)

Receives a buffer of bytes.

Note

This function blocks using the polling method until all bytes have been received.

Parameters:

base – Pointer to the FLEXIO_UART_Type structure.
rxData – The buffer to store the received bytes.
rxSize – The number of data bytes to be received.

Return values:

kStatus_FLEXIO_UART_Timeout – Transmission timed out and was aborted.
kStatus_Success – Successfully received all data.

status_t FLEXIO_UART_TransferCreateHandle(FLEXIO_UART_Type *base, flexio_uart_handle_t *handle, flexio_uart_transfer_callback_t callback, void *userData)

Initializes the UART handle.

This function initializes the FlexIO UART handle, which can be used for other FlexIO UART transactional APIs. Call this API once to get the initialized handle.

The UART driver supports the “background” receiving, which means that users can set up a RX ring buffer optionally. Data received is stored into the ring buffer even when the user doesn’t call the FLEXIO_UART_TransferReceiveNonBlocking() API. If there is already data received in the ring buffer, users can get the received data from the ring buffer directly. The ring buffer is disabled if passing NULL as ringBuffer.

Parameters:

base – to FLEXIO_UART_Type structure.
handle – Pointer to the flexio_uart_handle_t structure to store the transfer state.
callback – The callback function.
userData – The parameter of the callback function.

Return values:

kStatus_Success – Successfully create the handle.
kStatus_OutOfRange – The FlexIO type/handle/ISR table out of range.

void FLEXIO_UART_TransferStartRingBuffer(FLEXIO_UART_Type *base, flexio_uart_handle_t *handle, uint8_t *ringBuffer, size_t ringBufferSize)

Sets up the RX ring buffer.

This function sets up the RX ring buffer to a specific UART handle.

When the RX ring buffer is used, data received is stored into the ring buffer even when the user doesn’t call the UART_ReceiveNonBlocking() API. If there is already data received in the ring buffer, users can get the received data from the ring buffer directly.

Note

When using the RX ring buffer, one byte is reserved for internal use. In other words, if ringBufferSize is 32, only 31 bytes are used for saving data.

Parameters:

base – Pointer to the FLEXIO_UART_Type structure.
handle – Pointer to the flexio_uart_handle_t structure to store the transfer state.
ringBuffer – Start address of ring buffer for background receiving. Pass NULL to disable the ring buffer.
ringBufferSize – Size of the ring buffer.

void FLEXIO_UART_TransferStopRingBuffer(FLEXIO_UART_Type *base, flexio_uart_handle_t *handle)

Aborts the background transfer and uninstalls the ring buffer.

This function aborts the background transfer and uninstalls the ring buffer.

Parameters:

base – Pointer to the FLEXIO_UART_Type structure.
handle – Pointer to the flexio_uart_handle_t structure to store the transfer state.

status_t FLEXIO_UART_TransferSendNonBlocking(FLEXIO_UART_Type *base, flexio_uart_handle_t *handle, flexio_uart_transfer_t *xfer)

Transmits a buffer of data using the interrupt method.

This function sends data using an interrupt method. This is a non-blocking function, which returns directly without waiting for all data to be written to the TX register. When all data is written to the TX register in ISR, the FlexIO UART driver calls the callback function and passes the kStatus_FLEXIO_UART_TxIdle as status parameter.

Note

The kStatus_FLEXIO_UART_TxIdle is passed to the upper layer when all data is written to the TX register. However, it does not ensure that all data is sent out.

Parameters:

base – Pointer to the FLEXIO_UART_Type structure.
handle – Pointer to the flexio_uart_handle_t structure to store the transfer state.
xfer – FlexIO UART transfer structure. See flexio_uart_transfer_t.

Return values:

kStatus_Success – Successfully starts the data transmission.
kStatus_UART_TxBusy – Previous transmission still not finished, data not written to the TX register.

void FLEXIO_UART_TransferAbortSend(FLEXIO_UART_Type *base, flexio_uart_handle_t *handle)

Aborts the interrupt-driven data transmit.

This function aborts the interrupt-driven data sending. Get the remainBytes to find out how many bytes are still not sent out.

Parameters:

base – Pointer to the FLEXIO_UART_Type structure.
handle – Pointer to the flexio_uart_handle_t structure to store the transfer state.

status_t FLEXIO_UART_TransferGetSendCount(FLEXIO_UART_Type *base, flexio_uart_handle_t *handle, size_t *count)

Gets the number of bytes sent.

This function gets the number of bytes sent driven by interrupt.

Parameters:

base – Pointer to the FLEXIO_UART_Type structure.
handle – Pointer to the flexio_uart_handle_t structure to store the transfer state.
count – Number of bytes sent so far by the non-blocking transaction.

Return values:

kStatus_NoTransferInProgress – transfer has finished or no transfer in progress.
kStatus_Success – Successfully return the count.

status_t FLEXIO_UART_TransferReceiveNonBlocking(FLEXIO_UART_Type *base, flexio_uart_handle_t *handle, flexio_uart_transfer_t *xfer, size_t *receivedBytes)

Receives a buffer of data using the interrupt method.

This function receives data using the interrupt method. This is a non-blocking function, which returns without waiting for all data to be received. If the RX ring buffer is used and not empty, the data in ring buffer is copied and the parameter receivedBytes shows how many bytes are copied from the ring buffer. After copying, if the data in ring buffer is not enough to read, the receive request is saved by the UART driver. When new data arrives, the receive request is serviced first. When all data is received, the UART driver notifies the upper layer through a callback function and passes the status parameter kStatus_UART_RxIdle. For example, if the upper layer needs 10 bytes but there are only 5 bytes in the ring buffer, the 5 bytes are copied to xfer->data. This function returns with the parameter receivedBytes set to 5. For the last 5 bytes, newly arrived data is saved from the xfer->data[5]. When 5 bytes are received, the UART driver notifies upper layer. If the RX ring buffer is not enabled, this function enables the RX and RX interrupt to receive data to xfer->data. When all data is received, the upper layer is notified.

Parameters:

base – Pointer to the FLEXIO_UART_Type structure.
handle – Pointer to the flexio_uart_handle_t structure to store the transfer state.
xfer – UART transfer structure. See flexio_uart_transfer_t.
receivedBytes – Bytes received from the ring buffer directly.

Return values:

kStatus_Success – Successfully queue the transfer into the transmit queue.
kStatus_FLEXIO_UART_RxBusy – Previous receive request is not finished.

void FLEXIO_UART_TransferAbortReceive(FLEXIO_UART_Type *base, flexio_uart_handle_t *handle)

Aborts the receive data which was using IRQ.

This function aborts the receive data which was using IRQ.

Parameters:

base – Pointer to the FLEXIO_UART_Type structure.
handle – Pointer to the flexio_uart_handle_t structure to store the transfer state.

status_t FLEXIO_UART_TransferGetReceiveCount(FLEXIO_UART_Type *base, flexio_uart_handle_t *handle, size_t *count)

Gets the number of bytes received.

This function gets the number of bytes received driven by interrupt.

Parameters:

base – Pointer to the FLEXIO_UART_Type structure.
handle – Pointer to the flexio_uart_handle_t structure to store the transfer state.
count – Number of bytes received so far by the non-blocking transaction.

Return values:

kStatus_NoTransferInProgress – transfer has finished or no transfer in progress.
kStatus_Success – Successfully return the count.

void FLEXIO_UART_TransferHandleIRQ(void *uartType, void *uartHandle)

FlexIO UART IRQ handler function.

This function processes the FlexIO UART transmit and receives the IRQ request.

Parameters:

uartType – Pointer to the FLEXIO_UART_Type structure.
uartHandle – Pointer to the flexio_uart_handle_t structure to store the transfer state.

void FLEXIO_UART_FlushShifters(FLEXIO_UART_Type *base)

Flush tx/rx shifters.

Parameters:

base – Pointer to the FLEXIO_UART_Type structure.

FSL_FLEXIO_UART_DRIVER_VERSION: FlexIO UART driver version.

Error codes for the UART driver.

Values:

enumerator kStatus_FLEXIO_UART_TxBusy: Transmitter is busy.

enumerator kStatus_FLEXIO_UART_RxBusy: Receiver is busy.

enumerator kStatus_FLEXIO_UART_TxIdle: UART transmitter is idle.

enumerator kStatus_FLEXIO_UART_RxIdle: UART receiver is idle.

enumerator kStatus_FLEXIO_UART_ERROR: ERROR happens on UART.

enumerator kStatus_FLEXIO_UART_RxRingBufferOverrun: UART RX software ring buffer overrun.

enumerator kStatus_FLEXIO_UART_RxHardwareOverrun: UART RX receiver overrun.

enumerator kStatus_FLEXIO_UART_Timeout: UART times out.

enumerator kStatus_FLEXIO_UART_BaudrateNotSupport: Baudrate is not supported in current clock source

enum _flexio_uart_bit_count_per_char

FlexIO UART bit count per char.

Values:

enumerator kFLEXIO_UART_7BitsPerChar: 7-bit data characters

enumerator kFLEXIO_UART_8BitsPerChar: 8-bit data characters

enumerator kFLEXIO_UART_9BitsPerChar: 9-bit data characters

enum _flexio_uart_interrupt_enable

Define FlexIO UART interrupt mask.

Values:

enumerator kFLEXIO_UART_TxDataRegEmptyInterruptEnable: Transmit buffer empty interrupt enable.

enumerator kFLEXIO_UART_RxDataRegFullInterruptEnable: Receive buffer full interrupt enable.

enum _flexio_uart_status_flags

Define FlexIO UART status mask.

Values:

enumerator kFLEXIO_UART_TxDataRegEmptyFlag: Transmit buffer empty flag.

enumerator kFLEXIO_UART_RxDataRegFullFlag: Receive buffer full flag.

enumerator kFLEXIO_UART_RxOverRunFlag: Receive buffer over run flag.

typedef enum _flexio_uart_bit_count_per_char flexio_uart_bit_count_per_char_t: FlexIO UART bit count per char.

typedef struct _flexio_uart_type FLEXIO_UART_Type: Define FlexIO UART access structure typedef.

typedef struct _flexio_uart_config flexio_uart_config_t: Define FlexIO UART user configuration structure.

typedef struct _flexio_uart_transfer flexio_uart_transfer_t: Define FlexIO UART transfer structure.

typedef struct _flexio_uart_handle flexio_uart_handle_t

typedef void (*flexio_uart_transfer_callback_t)(FLEXIO_UART_Type *base, flexio_uart_handle_t *handle, status_t status, void *userData): FlexIO UART transfer callback function.

UART_RETRY_TIMES: Retry times for waiting flag.

struct _flexio_uart_type

#include <fsl_flexio_uart.h>

Define FlexIO UART access structure typedef.

Public Members

FLEXIO_Type *flexioBase: FlexIO base pointer.

uint8_t TxPinIndex: Pin select for UART_Tx.

uint8_t RxPinIndex: Pin select for UART_Rx.

uint8_t shifterIndex[2]: Shifter index used in FlexIO UART.

uint8_t timerIndex[2]: Timer index used in FlexIO UART.

struct _flexio_uart_config

#include <fsl_flexio_uart.h>

Define FlexIO UART user configuration structure.

Public Members

bool enableUart: Enable/disable FlexIO UART TX & RX.

bool enableInDoze: Enable/disable FlexIO operation in doze mode

bool enableInDebug: Enable/disable FlexIO operation in debug mode

bool enableFastAccess: Enable/disable fast access to FlexIO registers, fast access requires the FlexIO clock to be at least twice the frequency of the bus clock.

uint32_t baudRate_Bps: Baud rate in Bps.

flexio_uart_bit_count_per_char_t bitCountPerChar: number of bits, 7/8/9 -bit

struct _flexio_uart_transfer

#include <fsl_flexio_uart.h>

Define FlexIO UART transfer structure.

Public Members

size_t dataSize: Transfer size

struct _flexio_uart_handle

#include <fsl_flexio_uart.h>

Define FLEXIO UART handle structure.

Public Members

const uint8_t *volatile txData: Address of remaining data to send.

volatile size_t txDataSize: Size of the remaining data to send.

uint8_t *volatile rxData: Address of remaining data to receive.

volatile size_t rxDataSize: Size of the remaining data to receive.

size_t txDataSizeAll: Total bytes to be sent.

size_t rxDataSizeAll: Total bytes to be received.

uint8_t *rxRingBuffer: Start address of the receiver ring buffer.

size_t rxRingBufferSize: Size of the ring buffer.

volatile uint16_t rxRingBufferHead: Index for the driver to store received data into ring buffer.

volatile uint16_t rxRingBufferTail: Index for the user to get data from the ring buffer.

flexio_uart_transfer_callback_t callback: Callback function.

void *userData: UART callback function parameter.

volatile uint8_t txState: TX transfer state.

volatile uint8_t rxState: RX transfer state

union __unnamed84__

Public Members

uint8_t *data: The buffer of data to be transfer.

uint8_t *rxData: The buffer to receive data.

const uint8_t *txData: The buffer of data to be sent.

FLEXSPI: Flexible Serial Peripheral Interface Driver#

uint32_t FLEXSPI_GetInstance(FLEXSPI_Type *base)

Get the instance number for FLEXSPI.

Parameters:

base – FLEXSPI base pointer.

status_t FLEXSPI_CheckAndClearError(FLEXSPI_Type *base, uint32_t status)

Check and clear IP command execution errors.

Parameters:

base – FLEXSPI base pointer.
status – interrupt status.

void FLEXSPI_Init(FLEXSPI_Type *base, const flexspi_config_t *config)

Initializes the FLEXSPI module and internal state.

This function enables the clock for FLEXSPI and also configures the FLEXSPI with the input configure parameters. Users should call this function before any FLEXSPI operations.

Parameters:

base – FLEXSPI peripheral base address.
config – FLEXSPI configure structure.

void FLEXSPI_GetDefaultConfig(flexspi_config_t *config)

Gets default settings for FLEXSPI.

Parameters:

config – FLEXSPI configuration structure.

void FLEXSPI_Deinit(FLEXSPI_Type *base)

Deinitializes the FLEXSPI module.

Clears the FLEXSPI state and FLEXSPI module registers.

Parameters:

base – FLEXSPI peripheral base address.

void FLEXSPI_UpdateDllValue(FLEXSPI_Type *base, flexspi_device_config_t *config, flexspi_port_t port)

Update FLEXSPI DLL value depending on currently flexspi root clock.

Parameters:

base – FLEXSPI peripheral base address.
config – Flash configuration parameters.
port – FLEXSPI Operation port.

void FLEXSPI_SetFlashConfig(FLEXSPI_Type *base, flexspi_device_config_t *config, flexspi_port_t port)

Configures the connected device parameter.

This function configures the connected device relevant parameters, such as the size, command, and so on. The flash configuration value cannot have a default value. The user needs to configure it according to the connected device.

Parameters:

base – FLEXSPI peripheral base address.
config – Flash configuration parameters.
port – FLEXSPI Operation port.

void FLEXSPI_SoftwareReset(FLEXSPI_Type *base)

Software reset for the FLEXSPI logic.

This function sets the software reset flags for both AHB and buffer domain and resets both AHB buffer and also IP FIFOs.

Parameters:

base – FLEXSPI peripheral base address.

static inline void FLEXSPI_Enable(FLEXSPI_Type *base, bool enable)

Enables or disables the FLEXSPI module.

Parameters:

base – FLEXSPI peripheral base address.
enable – True means enable FLEXSPI, false means disable.

void FLEXSPI_UpdateAhbBuffersSettings(FLEXSPI_Type *base, flexspi_ahbBuffers_ctrl_t *ptrAhbBufferCtrl)

Update all AHB buffers’ settings, including buffer size, master ID.

Parameters:

base – FLEXSPI peripheral base address.
ptrAhbBufferCtrl – Pointer to structure flexspi_ahbBuffers_ctrl_t which store all AHB buffers’ settings.

static inline void FLEXSPI_EnableInterrupts(FLEXSPI_Type *base, uint32_t mask)

Enables the FLEXSPI interrupts.

Parameters:

base – FLEXSPI peripheral base address.
mask – FLEXSPI interrupt source.

static inline void FLEXSPI_DisableInterrupts(FLEXSPI_Type *base, uint32_t mask)

Disable the FLEXSPI interrupts.

Parameters:

base – FLEXSPI peripheral base address.
mask – FLEXSPI interrupt source.

static inline void FLEXSPI_EnableTxDMA(FLEXSPI_Type *base, bool enable)

Enables or disables FLEXSPI IP Tx FIFO DMA requests.

Parameters:

base – FLEXSPI peripheral base address.
enable – Enable flag for transmit DMA request. Pass true for enable, false for disable.

static inline void FLEXSPI_EnableRxDMA(FLEXSPI_Type *base, bool enable)

Enables or disables FLEXSPI IP Rx FIFO DMA requests.

Parameters:

base – FLEXSPI peripheral base address.
enable – Enable flag for receive DMA request. Pass true for enable, false for disable.

static inline uint32_t FLEXSPI_GetTxFifoAddress(FLEXSPI_Type *base)

Gets FLEXSPI IP tx fifo address for DMA transfer.

Parameters:

base – FLEXSPI peripheral base address.

Return values:

The – tx fifo address.

static inline uint32_t FLEXSPI_GetRxFifoAddress(FLEXSPI_Type *base)

Gets FLEXSPI IP rx fifo address for DMA transfer.

Parameters:

base – FLEXSPI peripheral base address.

Return values:

The – rx fifo address.

static inline void FLEXSPI_ResetFifos(FLEXSPI_Type *base, bool txFifo, bool rxFifo)

Clears the FLEXSPI IP FIFO logic.

Parameters:

base – FLEXSPI peripheral base address.
txFifo – Pass true to reset TX FIFO.
rxFifo – Pass true to reset RX FIFO.

static inline void FLEXSPI_GetFifoCounts(FLEXSPI_Type *base, size_t *txCount, size_t *rxCount)

Gets the valid data entries in the FLEXSPI FIFOs.

Parameters:

base – FLEXSPI peripheral base address.
txCount – [out] Pointer through which the current number of bytes in the transmit FIFO is returned. Pass NULL if this value is not required.
rxCount – [out] Pointer through which the current number of bytes in the receive FIFO is returned. Pass NULL if this value is not required.

static inline uint32_t FLEXSPI_GetInterruptStatusFlags(FLEXSPI_Type *base)

Get the FLEXSPI interrupt status flags.

Parameters:

base – FLEXSPI peripheral base address.

Return values:

interrupt – status flag, use status flag to AND flexspi_flags_t could get the related status.

static inline void FLEXSPI_ClearInterruptStatusFlags(FLEXSPI_Type *base, uint32_t mask)

Get the FLEXSPI interrupt status flags.

Parameters:

base – FLEXSPI peripheral base address.
mask – FLEXSPI interrupt source.

static inline flexspi_arb_command_source_t FLEXSPI_GetArbitratorCommandSource(FLEXSPI_Type *base)

Gets the trigger source of current command sequence granted by arbitrator.

Parameters:

base – FLEXSPI peripheral base address.

Return values:

trigger – source of current command sequence.

static inline flexspi_ip_error_code_t FLEXSPI_GetIPCommandErrorCode(FLEXSPI_Type *base, uint8_t *index)

Gets the error code when IP command error detected.

Parameters:

base – FLEXSPI peripheral base address.
index – Pointer to a uint8_t type variable to receive the sequence index when error detected.

Return values:

error – code when IP command error detected.

static inline flexspi_ahb_error_code_t FLEXSPI_GetAHBCommandErrorCode(FLEXSPI_Type *base, uint8_t *index)

Gets the error code when AHB command error detected.

Parameters:

base – FLEXSPI peripheral base address.
index – Pointer to a uint8_t type variable to receive the sequence index when error detected.

Return values:

error – code when AHB command error detected.

static inline bool FLEXSPI_GetBusIdleStatus(FLEXSPI_Type *base)

Returns whether the bus is idle.

Parameters:

base – FLEXSPI peripheral base address.

Return values:

true – Bus is idle.
false – Bus is busy.

void FLEXSPI_UpdateRxSampleClock(FLEXSPI_Type *base, flexspi_read_sample_clock_t clockSource)

Update read sample clock source.

Parameters:

base – FLEXSPI peripheral base address.
clockSource – clockSource of type flexspi_read_sample_clock_t

void FLEXSPI_UpdateLUT(FLEXSPI_Type *base, uint32_t index, const uint32_t *cmd, uint32_t count)

Updates the LUT table.

Parameters:

base – FLEXSPI peripheral base address.
index – From which index start to update. It could be any index of the LUT table, which also allows user to update command content inside a command. Each command consists of up to 8 instructions and occupy 4*32-bit memory.
cmd – Command sequence array.
count – Number of sequences.

static inline void FLEXSPI_WriteData(FLEXSPI_Type *base, uint32_t data, uint8_t fifoIndex)

Writes data into FIFO.

Parameters:

base – FLEXSPI peripheral base address
data – The data bytes to send
fifoIndex – Destination fifo index.

static inline uint32_t FLEXSPI_ReadData(FLEXSPI_Type *base, uint8_t fifoIndex)

Receives data from data FIFO.

Parameters:

base – FLEXSPI peripheral base address
fifoIndex – Source fifo index.

Returns:

The data in the FIFO.

status_t FLEXSPI_WriteBlocking(FLEXSPI_Type *base, uint8_t *buffer, size_t size)

Sends a buffer of data bytes using blocking method.

Note

This function blocks via polling until all bytes have been sent.

Parameters:

base – FLEXSPI peripheral base address
buffer – The data bytes to send
size – The number of data bytes to send

Return values:

kStatus_Success – write success without error
kStatus_FLEXSPI_SequenceExecutionTimeout – sequence execution timeout
kStatus_FLEXSPI_IpCommandSequenceError – IP command sequence error detected
kStatus_FLEXSPI_IpCommandGrantTimeout – IP command grant timeout detected

status_t FLEXSPI_ReadBlocking(FLEXSPI_Type *base, uint8_t *buffer, size_t size)

Receives a buffer of data bytes using a blocking method.

Note

This function blocks via polling until all bytes have been sent.

Parameters:

base – FLEXSPI peripheral base address
buffer – The data bytes to send
size – The number of data bytes to receive

Return values:

kStatus_Success – read success without error
kStatus_FLEXSPI_SequenceExecutionTimeout – sequence execution timeout
kStatus_FLEXSPI_IpCommandSequenceError – IP command sequencen error detected
kStatus_FLEXSPI_IpCommandGrantTimeout – IP command grant timeout detected

status_t FLEXSPI_TransferBlocking(FLEXSPI_Type *base, flexspi_transfer_t *xfer)

Execute command to transfer a buffer data bytes using a blocking method.

Parameters:

base – FLEXSPI peripheral base address
xfer – pointer to the transfer structure.

Return values:

kStatus_Success – command transfer success without error
kStatus_FLEXSPI_SequenceExecutionTimeout – sequence execution timeout
kStatus_FLEXSPI_IpCommandSequenceError – IP command sequence error detected
kStatus_FLEXSPI_IpCommandGrantTimeout – IP command grant timeout detected

void FLEXSPI_TransferCreateHandle(FLEXSPI_Type *base, flexspi_handle_t *handle, flexspi_transfer_callback_t callback, void *userData)

Initializes the FLEXSPI handle which is used in transactional functions.

Parameters:

base – FLEXSPI peripheral base address.
handle – pointer to flexspi_handle_t structure to store the transfer state.
callback – pointer to user callback function.
userData – user parameter passed to the callback function.

status_t FLEXSPI_TransferNonBlocking(FLEXSPI_Type *base, flexspi_handle_t *handle, flexspi_transfer_t *xfer)

Performs a interrupt non-blocking transfer on the FLEXSPI bus.

Note

Calling the API returns immediately after transfer initiates. The user needs to call FLEXSPI_GetTransferCount to poll the transfer status to check whether the transfer is finished. If the return status is not kStatus_FLEXSPI_Busy, the transfer is finished. For FLEXSPI_Read, the dataSize should be multiple of rx watermark level, or FLEXSPI could not read data properly.

Parameters:

base – FLEXSPI peripheral base address.
handle – pointer to flexspi_handle_t structure which stores the transfer state.
xfer – pointer to flexspi_transfer_t structure.

Return values:

kStatus_Success – Successfully start the data transmission.
kStatus_FLEXSPI_Busy – Previous transmission still not finished.

status_t FLEXSPI_TransferGetCount(FLEXSPI_Type *base, flexspi_handle_t *handle, size_t *count)

Gets the master transfer status during a interrupt non-blocking transfer.

Parameters:

base – FLEXSPI peripheral base address.
handle – pointer to flexspi_handle_t structure which stores the transfer state.
count – Number of bytes transferred so far by the non-blocking transaction.

Return values:

kStatus_InvalidArgument – count is Invalid.
kStatus_Success – Successfully return the count.

void FLEXSPI_TransferAbort(FLEXSPI_Type *base, flexspi_handle_t *handle)

Aborts an interrupt non-blocking transfer early.

Note

This API can be called at any time when an interrupt non-blocking transfer initiates to abort the transfer early.

Parameters:

base – FLEXSPI peripheral base address.
handle – pointer to flexspi_handle_t structure which stores the transfer state

void FLEXSPI_TransferHandleIRQ(FLEXSPI_Type *base, flexspi_handle_t *handle)

Master interrupt handler.

Parameters:

base – FLEXSPI peripheral base address.
handle – pointer to flexspi_handle_t structure.

FSL_FLEXSPI_DRIVER_VERSION: FLEXSPI driver version.

Status structure of FLEXSPI.

Values:

enumerator kStatus_FLEXSPI_Busy: FLEXSPI is busy

enumerator kStatus_FLEXSPI_SequenceExecutionTimeout: Sequence execution timeout error occurred during FLEXSPI transfer.

enumerator kStatus_FLEXSPI_IpCommandSequenceError: IP command Sequence execution timeout error occurred during FLEXSPI transfer.

enumerator kStatus_FLEXSPI_IpCommandGrantTimeout: IP command grant timeout error occurred during FLEXSPI transfer.

CMD definition of FLEXSPI, use to form LUT instruction, _flexspi_command.

Values:

enumerator kFLEXSPI_Command_STOP: Stop execution, deassert CS.

enumerator kFLEXSPI_Command_SDR: Transmit Command code to Flash, using SDR mode.

enumerator kFLEXSPI_Command_RADDR_SDR: Transmit Row Address to Flash, using SDR mode.

enumerator kFLEXSPI_Command_CADDR_SDR: Transmit Column Address to Flash, using SDR mode.

enumerator kFLEXSPI_Command_MODE1_SDR: Transmit 1-bit Mode bits to Flash, using SDR mode.

enumerator kFLEXSPI_Command_MODE2_SDR: Transmit 2-bit Mode bits to Flash, using SDR mode.

enumerator kFLEXSPI_Command_MODE4_SDR: Transmit 4-bit Mode bits to Flash, using SDR mode.

enumerator kFLEXSPI_Command_MODE8_SDR: Transmit 8-bit Mode bits to Flash, using SDR mode.

enumerator kFLEXSPI_Command_WRITE_SDR: Transmit Programming Data to Flash, using SDR mode.

enumerator kFLEXSPI_Command_READ_SDR: Receive Read Data from Flash, using SDR mode.

enumerator kFLEXSPI_Command_LEARN_SDR: Receive Read Data or Preamble bit from Flash, SDR mode.

enumerator kFLEXSPI_Command_DATSZ_SDR: Transmit Read/Program Data size (byte) to Flash, SDR mode.

enumerator kFLEXSPI_Command_DUMMY_SDR: Leave data lines undriven by FlexSPI controller.

enumerator kFLEXSPI_Command_DUMMY_RWDS_SDR: Leave data lines undriven by FlexSPI controller, dummy cycles decided by RWDS.

enumerator kFLEXSPI_Command_DDR: Transmit Command code to Flash, using DDR mode.

enumerator kFLEXSPI_Command_RADDR_DDR: Transmit Row Address to Flash, using DDR mode.

enumerator kFLEXSPI_Command_CADDR_DDR: Transmit Column Address to Flash, using DDR mode.

enumerator kFLEXSPI_Command_MODE1_DDR: Transmit 1-bit Mode bits to Flash, using DDR mode.

enumerator kFLEXSPI_Command_MODE2_DDR: Transmit 2-bit Mode bits to Flash, using DDR mode.

enumerator kFLEXSPI_Command_MODE4_DDR: Transmit 4-bit Mode bits to Flash, using DDR mode.

enumerator kFLEXSPI_Command_MODE8_DDR: Transmit 8-bit Mode bits to Flash, using DDR mode.

enumerator kFLEXSPI_Command_WRITE_DDR: Transmit Programming Data to Flash, using DDR mode.

enumerator kFLEXSPI_Command_READ_DDR: Receive Read Data from Flash, using DDR mode.

enumerator kFLEXSPI_Command_LEARN_DDR: Receive Read Data or Preamble bit from Flash, DDR mode.

enumerator kFLEXSPI_Command_DATSZ_DDR: Transmit Read/Program Data size (byte) to Flash, DDR mode.

enumerator kFLEXSPI_Command_DUMMY_DDR: Leave data lines undriven by FlexSPI controller.

enumerator kFLEXSPI_Command_DUMMY_RWDS_DDR: Leave data lines undriven by FlexSPI controller, dummy cycles decided by RWDS.

enumerator kFLEXSPI_Command_JUMP_ON_CS: Stop execution, deassert CS and save operand[7:0] as the instruction start pointer for next sequence

enum _flexspi_pad

pad definition of FLEXSPI, use to form LUT instruction.

Values:

enumerator kFLEXSPI_1PAD: Transmit command/address and transmit/receive data only through DATA0/DATA1.

enumerator kFLEXSPI_2PAD: Transmit command/address and transmit/receive data only through DATA[1:0].

enumerator kFLEXSPI_4PAD: Transmit command/address and transmit/receive data only through DATA[3:0].

enumerator kFLEXSPI_8PAD: Transmit command/address and transmit/receive data only through DATA[7:0].

enum _flexspi_flags

FLEXSPI interrupt status flags.

Values:

enumerator kFLEXSPI_SequenceExecutionTimeoutFlag: Sequence execution timeout.

enumerator kFLEXSPI_AhbBusErrorFlag: AHB Bus error flag.

enumerator kFLEXSPI_SckStoppedBecauseTxEmptyFlag: SCK is stopped during command sequence because Async TX FIFO empty.

enumerator kFLEXSPI_SckStoppedBecauseRxFullFlag: SCK is stopped during command sequence because Async RX FIFO full.

enumerator kFLEXSPI_IpTxFifoWatermarkEmptyFlag: IP TX FIFO WaterMark empty.

enumerator kFLEXSPI_IpRxFifoWatermarkAvailableFlag: IP RX FIFO WaterMark available.

enumerator kFLEXSPI_AhbCommandSequenceErrorFlag: AHB triggered Command Sequences Error.

enumerator kFLEXSPI_IpCommandSequenceErrorFlag: IP triggered Command Sequences Error.

enumerator kFLEXSPI_AhbCommandGrantTimeoutFlag: AHB triggered Command Sequences Grant Timeout.

enumerator kFLEXSPI_IpCommandGrantTimeoutFlag: IP triggered Command Sequences Grant Timeout.

enumerator kFLEXSPI_IpCommandExecutionDoneFlag: IP triggered Command Sequences Execution finished.

enumerator kFLEXSPI_AllInterruptFlags: All flags.

enum _flexspi_read_sample_clock

FLEXSPI sample clock source selection for Flash Reading.

Values:

enumerator kFLEXSPI_ReadSampleClkLoopbackInternally: Dummy Read strobe generated by FlexSPI Controller and loopback internally.

enumerator kFLEXSPI_ReadSampleClkLoopbackFromDqsPad: Dummy Read strobe generated by FlexSPI Controller and loopback from DQS pad.

enumerator kFLEXSPI_ReadSampleClkLoopbackFromSckPad: SCK output clock and loopback from SCK pad.

enumerator kFLEXSPI_ReadSampleClkExternalInputFromDqsPad: Flash provided Read strobe and input from DQS pad.

enum _flexspi_cs_interval_cycle_unit

FLEXSPI interval unit for flash device select.

Values:

enumerator kFLEXSPI_CsIntervalUnit1SckCycle: Chip selection interval: CSINTERVAL * 1 serial clock cycle.

enumerator kFLEXSPI_CsIntervalUnit256SckCycle: Chip selection interval: CSINTERVAL * 256 serial clock cycle.

enum _flexspi_ahb_write_wait_unit

FLEXSPI AHB wait interval unit for writing.

Values:

enumerator kFLEXSPI_AhbWriteWaitUnit2AhbCycle: AWRWAIT unit is 2 ahb clock cycle.

enumerator kFLEXSPI_AhbWriteWaitUnit8AhbCycle: AWRWAIT unit is 8 ahb clock cycle.

enumerator kFLEXSPI_AhbWriteWaitUnit32AhbCycle: AWRWAIT unit is 32 ahb clock cycle.

enumerator kFLEXSPI_AhbWriteWaitUnit128AhbCycle: AWRWAIT unit is 128 ahb clock cycle.

enumerator kFLEXSPI_AhbWriteWaitUnit512AhbCycle: AWRWAIT unit is 512 ahb clock cycle.

enumerator kFLEXSPI_AhbWriteWaitUnit2048AhbCycle: AWRWAIT unit is 2048 ahb clock cycle.

enumerator kFLEXSPI_AhbWriteWaitUnit8192AhbCycle: AWRWAIT unit is 8192 ahb clock cycle.

enumerator kFLEXSPI_AhbWriteWaitUnit32768AhbCycle: AWRWAIT unit is 32768 ahb clock cycle.

enum _flexspi_ip_error_code

Error Code when IP command Error detected.

Values:

enumerator kFLEXSPI_IpCmdErrorNoError: No error.

enumerator kFLEXSPI_IpCmdErrorJumpOnCsInIpCmd: IP command with JMP_ON_CS instruction used.

enumerator kFLEXSPI_IpCmdErrorUnknownOpCode: Unknown instruction opcode in the sequence.

enumerator kFLEXSPI_IpCmdErrorSdrDummyInDdrSequence: Instruction DUMMY_SDR/DUMMY_RWDS_SDR used in DDR sequence.

enumerator kFLEXSPI_IpCmdErrorDdrDummyInSdrSequence: Instruction DUMMY_DDR/DUMMY_RWDS_DDR used in SDR sequence.

enumerator kFLEXSPI_IpCmdErrorInvalidAddress: Flash access start address exceed the whole flash address range (A1/A2/B1/B2).

enumerator kFLEXSPI_IpCmdErrorSequenceExecutionTimeout: Sequence execution timeout.

enumerator kFLEXSPI_IpCmdErrorFlashBoundaryAcrosss: Flash boundary crossed.

enum _flexspi_ahb_error_code

Error Code when AHB command Error detected.

Values:

enumerator kFLEXSPI_AhbCmdErrorNoError: No error.

enumerator kFLEXSPI_AhbCmdErrorJumpOnCsInWriteCmd: AHB Write command with JMP_ON_CS instruction used in the sequence.

enumerator kFLEXSPI_AhbCmdErrorUnknownOpCode: Unknown instruction opcode in the sequence.

enumerator kFLEXSPI_AhbCmdErrorSdrDummyInDdrSequence: Instruction DUMMY_SDR/DUMMY_RWDS_SDR used in DDR sequence.

enumerator kFLEXSPI_AhbCmdErrorDdrDummyInSdrSequence: Instruction DUMMY_DDR/DUMMY_RWDS_DDR used in SDR sequence.

enumerator kFLEXSPI_AhbCmdSequenceExecutionTimeout: Sequence execution timeout.

enum _flexspi_port

FLEXSPI operation port select.

Values:

enumerator kFLEXSPI_PortA1: Access flash on A1 port.

enumerator kFLEXSPI_PortA2: Access flash on A2 port.

enumerator kFLEXSPI_PortCount

enum _flexspi_arb_command_source

Trigger source of current command sequence granted by arbitrator.

Values:

enumerator kFLEXSPI_AhbReadCommand

enumerator kFLEXSPI_AhbWriteCommand

enumerator kFLEXSPI_IpCommand

enumerator kFLEXSPI_SuspendedCommand

enum _flexspi_command_type

Command type.

Values:

enumerator kFLEXSPI_Command: FlexSPI operation: Only command, both TX and Rx buffer are ignored.

enumerator kFLEXSPI_Config: FlexSPI operation: Configure device mode, the TX fifo size is fixed in LUT.

enumerator kFLEXSPI_Read

enumerator kFLEXSPI_Write

typedef enum _flexspi_pad flexspi_pad_t: pad definition of FLEXSPI, use to form LUT instruction.

typedef enum _flexspi_flags flexspi_flags_t: FLEXSPI interrupt status flags.

typedef enum _flexspi_read_sample_clock flexspi_read_sample_clock_t: FLEXSPI sample clock source selection for Flash Reading.

typedef enum _flexspi_cs_interval_cycle_unit flexspi_cs_interval_cycle_unit_t: FLEXSPI interval unit for flash device select.

typedef enum _flexspi_ahb_write_wait_unit flexspi_ahb_write_wait_unit_t: FLEXSPI AHB wait interval unit for writing.

typedef enum _flexspi_ip_error_code flexspi_ip_error_code_t: Error Code when IP command Error detected.

typedef enum _flexspi_ahb_error_code flexspi_ahb_error_code_t: Error Code when AHB command Error detected.

typedef enum _flexspi_port flexspi_port_t: FLEXSPI operation port select.

typedef enum _flexspi_arb_command_source flexspi_arb_command_source_t: Trigger source of current command sequence granted by arbitrator.

typedef enum _flexspi_command_type flexspi_command_type_t: Command type.

typedef struct _flexspi_ahbBuffer_config flexspi_ahbBuffer_config_t

typedef struct _flexspi_ahbBuffers_ctrl flexspi_ahbBuffers_ctrl_t: Structure to control all AHB buffers.

typedef struct _flexspi_config flexspi_config_t: FLEXSPI configuration structure.

typedef struct _flexspi_device_config flexspi_device_config_t: External device configuration items.

typedef struct _flexspi_transfer flexspi_transfer_t: Transfer structure for FLEXSPI.

typedef struct _flexspi_handle flexspi_handle_t

typedef void (*flexspi_transfer_callback_t)(FLEXSPI_Type *base, flexspi_handle_t *handle, status_t status, void *userData): FLEXSPI transfer callback function.

typedef struct _flexspi_addr_map_config flexspi_addr_map_config_t: Address mapping configuration structure.

FSL_FEATURE_FLEXSPI_AHB_BUFFER_COUNT

FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1): Formula to form FLEXSPI instructions in LUT table.

struct _flexspi_ahbBuffer_config

Public Members

uint8_t priority: This priority for AHB Master Read which this AHB RX Buffer is assigned.

uint8_t masterIndex: AHB Master ID the AHB RX Buffer is assigned.

uint16_t bufferSize: AHB buffer size in byte.

bool enablePrefetch: AHB Read Prefetch Enable for current AHB RX Buffer corresponding Master, allows prefetch disable/enable separately for each master.

struct _flexspi_ahbBuffers_ctrl

#include <fsl_flexspi.h>

Structure to control all AHB buffers.

Public Members

flexspi_ahbBuffer_config_t buffer[FSL_FEATURE_FLEXSPI_AHB_BUFFER_COUNTn(0)]: Configurations of all AHB buffers.

struct _flexspi_config

#include <fsl_flexspi.h>

FLEXSPI configuration structure.

Public Members

uint8_t clockDiv: FLEXSPI serial root clock divider.

flexspi_read_sample_clock_t rxSampleClock: Sample Clock source selection for Flash Reading.

bool enableSckFreeRunning: Enable/disable SCK output free-running.

bool enableDoze: Enable/disable doze mode support.

bool enableHalfSpeedAccess: Enable/disable divide by 2 of the clock for half speed commands.

flexspi_read_sample_clock_t rxSampleClockPortB: Sample Clock source_b selection for Flash Reading.

bool rxSampleClockDiff: Sample Clock source or source_b selection for Flash Reading.

bool enableSameConfigForAll: Enable/disable same configuration for all connected devices when enabled, same configuration in FLASHA1CRx is applied to all.

uint16_t seqTimeoutCycle: Timeout wait cycle for command sequence execution, timeout after ahbGrantTimeoutCyle*1024 serial root clock cycles.

uint8_t ipGrantTimeoutCycle: Timeout wait cycle for IP command grant, timeout after ipGrantTimeoutCycle*1024 AHB clock cycles.

uint8_t txWatermark: FLEXSPI IP transmit watermark value.

uint8_t rxWatermark: FLEXSPI receive watermark value.

struct _flexspi_device_config

#include <fsl_flexspi.h>

External device configuration items.

Public Members

uint32_t flexspiRootClk: FLEXSPI serial root clock.

bool isSck2Enabled: FLEXSPI use SCK2.

uint32_t flashSize: Flash size in KByte.

bool addressShift: Address shift.

flexspi_cs_interval_cycle_unit_t CSIntervalUnit: CS interval unit, 1 or 256 cycle.

uint16_t CSInterval: CS line assert interval, multiply CS interval unit to get the CS line assert interval cycles.

uint8_t CSHoldTime: CS line hold time.

uint8_t CSSetupTime: CS line setup time.

uint8_t dataValidTime: Data valid time for external device.

uint8_t columnspace: Column space size.

bool enableWordAddress: If enable word address.

uint8_t AWRSeqIndex: Sequence ID for AHB write command.

uint8_t AWRSeqNumber: Sequence number for AHB write command.

uint8_t ARDSeqIndex: Sequence ID for AHB read command.

uint8_t ARDSeqNumber: Sequence number for AHB read command.

flexspi_ahb_write_wait_unit_t AHBWriteWaitUnit: AHB write wait unit.

uint16_t AHBWriteWaitInterval: AHB write wait interval, multiply AHB write interval unit to get the AHB write wait cycles.

bool enableWriteMask: Enable/Disable FLEXSPI drive DQS pin as write mask when writing to external device.

bool isFroClockSource: Is FRO clock source or not.

struct _flexspi_transfer

#include <fsl_flexspi.h>

Transfer structure for FLEXSPI.

Public Members

uint32_t deviceAddress: Operation device address.

flexspi_port_t port: Operation port.

flexspi_command_type_t cmdType: Execution command type.

uint8_t seqIndex: Sequence ID for command.

uint8_t SeqNumber: Sequence number for command.

uint32_t *data: Data buffer.

size_t dataSize: Data size in bytes.

struct _flexspi_handle

#include <fsl_flexspi.h>

Transfer handle structure for FLEXSPI.

Public Members

uint32_t state: Internal state for FLEXSPI transfer

uint8_t *data: Data buffer.

size_t dataSize: Remaining Data size in bytes.

size_t transferTotalSize: Total Data size in bytes.

flexspi_transfer_callback_t completionCallback: Callback for users while transfer finish or error occurred

void *userData: FLEXSPI callback function parameter.

struct _flexspi_addr_map_config

#include <fsl_flexspi.h>

Address mapping configuration structure.

Public Members

uint32_t addrStart: Remapping start address.

uint32_t addrEnd: Remapping end address.

uint32_t addrOffset: Address offset.

bool remapEnable: Enable address remapping.

struct ahbConfig

Public Members

uint8_t ahbGrantTimeoutCycle: Timeout wait cycle for AHB command grant, timeout after ahbGrantTimeoutCyle*1024 AHB clock cycles.

uint16_t ahbBusTimeoutCycle: Timeout wait cycle for AHB read/write access, timeout after ahbBusTimeoutCycle*1024 AHB clock cycles.

uint8_t resumeWaitCycle: Wait cycle for idle state before suspended command sequence resume, timeout after ahbBusTimeoutCycle AHB clock cycles.

bool disableAhbReadResume: True: Suspended AHB read prefetch does not resume once aborted; False: Suspended AHB read prefetch resumes when AHB is IDLE.

flexspi_ahbBuffer_config_t buffer[FSL_FEATURE_FLEXSPI_AHB_BUFFER_COUNTn(0)]: AHB buffer size.

bool enableClearAHBBufferOpt: Enable/disable automatically clean AHB RX Buffer and TX Buffer when FLEXSPI returns STOP mode ACK.

bool enableReadAddressOpt: Enable/disable remove AHB read burst start address alignment limitation. when enable, there is no AHB read burst start address alignment limitation.

bool enableAHBPrefetch: Enable/disable AHB read prefetch feature, when enabled, FLEXSPI will fetch more data than current AHB burst.

bool enableAHBBufferable: Enable/disable AHB bufferable write access support, when enabled, FLEXSPI return before waiting for command execution finished.

bool enableAHBCachable: Enable AHB bus cachable read access support.

FLEXSPI eDMA Driver#

void FLEXSPI_TransferCreateHandleEDMA(FLEXSPI_Type *base, flexspi_edma_handle_t *handle, flexspi_edma_callback_t callback, void *userData, edma_handle_t *txDmaHandle, edma_handle_t *rxDmaHandle)

Initializes the FLEXSPI handle for transfer which is used in transactional functions and set the callback.

Parameters:

base – FLEXSPI peripheral base address
handle – Pointer to flexspi_edma_handle_t structure
callback – FLEXSPI callback, NULL means no callback.
userData – User callback function data.
txDmaHandle – User requested DMA handle for TX DMA transfer.
rxDmaHandle – User requested DMA handle for RX DMA transfer.

void FLEXSPI_TransferUpdateSizeEDMA(FLEXSPI_Type *base, flexspi_edma_handle_t *handle, flexspi_edma_transfer_nsize_t nsize)

Update FLEXSPI EDMA transfer source data transfer size(SSIZE) and destination data transfer size(DSIZE).

FREQME: Frequency Measurement#

GLIKEY#

Values:

enumerator kStatus_GLIKEY_LockedError: GLIKEY status for locked SFR registers (unexpected) .

enumerator kStatus_GLIKEY_NotLocked: GLIKEY status for unlocked SFR registers.

enumerator kStatus_GLIKEY_Locked: GLIKEY status for locked SFR registers.

enumerator kStatus_GLIKEY_DisabledError: GLIKEY status for disabled error.

FSL_GLIKEY_DRIVER_VERSION

Defines GLIKEY driver version 2.0.1.

Change log:

Version 2.0.1
- Implement INIT state recovery from the LOCKED state after a reset when the previous index was locked.
Version 2.0.0
- Initial version

GLIKEY_CODEWORD_STEP1

GLIKEY_CODEWORD_STEP2

GLIKEY_CODEWORD_STEP3

GLIKEY_CODEWORD_STEP4

GLIKEY_CODEWORD_STEP5

GLIKEY_CODEWORD_STEP6

GLIKEY_CODEWORD_STEP7

GLIKEY_CODEWORD_STEP_EN

GLIKEY_FSM_WR_DIS

GLIKEY_FSM_INIT

GLIKEY_FSM_STEP1

GLIKEY_FSM_STEP2

GLIKEY_FSM_STEP3

GLIKEY_FSM_STEP4

GLIKEY_FSM_LOCKED

GLIKEY_FSM_WR_EN

GLIKEY_FSM_SSR_RESET

uint32_t GLIKEY_GetStatus(GLIKEY_Type *base)

Retreives the current status of Glikey.

Parameters:

base – [in] The base address of the Glikey instance

Returns:

Glikey status information

status_t GLIKEY_IsLocked(GLIKEY_Type *base)

Get if Glikey is locked.

This operation returns the locking status of Glikey.

Return values:

kStatus_GLIKEY_Locked – if locked
kStatus_GLIKEY_NotLocked – if unlocked

Returns:

Status

status_t GLIKEY_CheckLock(GLIKEY_Type *base)

Check if Glikey is locked.

This operation returns the locking status of Glikey.

Return values:

kStatus_GLIKEY_LockedError – if locked
kStatus_GLIKEY_NotLocked – if unlocked

Returns:

Status kStatus_Success if success

status_t GLIKEY_SyncReset(GLIKEY_Type *base)

Perform a synchronous reset of Glikey.

This function performs a synchrounous reset of the Glikey. This results in:

Glikey will return to the INIT state, unless it is in the LOCK state

Parameters:

base – [in] The base address of the Glikey instance

Returns:

Status kStatus_Success if success Possible errors: kStatus_GLIKEY_LockedError

status_t GLIKEY_SetIntEnable(GLIKEY_Type *base, uint32_t value)

Set interrupt enable flag of Glikey.

Parameters:

base – [in] The base address of the Glikey instance
value – [in] Value to set the interrupt enable flag to, see #[TODO: add reference to constants]

Returns:

Status kStatus_Success if success Possible errors: kStatus_GLIKEY_LockedError

status_t GLIKEY_GetIntEnable(GLIKEY_Type *base, uint32_t *value)

Get interrupt enable flag of Glikey.

Parameters:

base – [in] The base address of the Glikey instance
value – [out] Pointer which will be filled with the interrupt enable status, see #[TODO: add reference to constants]

Returns:

Status kStatus_Success if success

status_t GLIKEY_ClearIntStatus(GLIKEY_Type *base)

Clear the interrupt status flag of Glikey.

Parameters:

base – [in] The base address of the Glikey instance

Returns:

Status kStatus_Success if success Possible errors: kStatus_GLIKEY_LockedError

status_t GLIKEY_SetIntStatus(GLIKEY_Type *base)

Set the interrupt status flag of Glikey.

Parameters:

base – [in] The base address of the Glikey instance

Returns:

Status kStatus_Success if success Possible errors: kStatus_GLIKEY_LockedError

status_t GLIKEY_Lock(GLIKEY_Type *base)

Lock Glikey SFR (Special Function Registers) interface.

This operation locks the Glikey SFR interface if it is not locked yet.

Parameters:

base – [in] The base address of the Glikey instance

Returns:

Status kStatus_Success if success

status_t GLIKEY_LockIndex(GLIKEY_Type *base)

Lock Glikey index.

This operation is used to lock a Glikey index. It can only be executed from the WR_EN state, executing it from any other state will result in Glikey entering WR_DIS state. When this happens Glikey requires a reset (synchrous or asynchronous) to go back to INIT state. If the Glikey SFR lock is active this operation will return an error.

Parameters:

base – [in] The base address of the Glikey instance

Returns:

Status kStatus_Success if success Possible errors: kStatus_GLIKEY_LockedError, kStatus_GLIKEY_DisabledError

status_t GLIKEY_IsIndexLocked(GLIKEY_Type *base, uint32_t index)

Check if Glikey index is locked.

This operation returns the locking status of Glikey index.

Parameters:

base – [in] The base address of the Glikey instance
index – [in] The index of the Glikey instance

Returns:

kStatus_GLIKEY_Locked if locked, kStatus_GLIKEY_NotLocked if unlocked Possible errors: kStatus_Fail

status_t GLIKEY_StartEnable(GLIKEY_Type *base, uint32_t index)

Start Glikey enable.

This operation is used to set a new index and start a the sequence to enable it. It needs to be started from the INIT state. If the new index is already locked Glikey will go to LOCKED state, otherwise it will go to STEP1 state. If this operation is used when Glikey is in any state other than INIT Glikey will go to WR_DIS state. It can only recover from this state through a reset (synchrounous or asyncrhonous). If the Glikey SFR lock is active this operation will return an error.

Parameters:

base – [in] The base address of the Glikey instance
index – [in] The index of the Glikey instance

Returns:

Status kStatus_Success if success Possible errors: kStatus_GLIKEY_LockedError, kStatus_Fail

status_t GLIKEY_ContinueEnable(GLIKEY_Type *base, uint32_t codeword)

Continue Glikey enable.

This operation is used to progress through the different states of the state machine, starting from STEP1 until the state WR_EN is reached. Each next state of the state machine can only be reached by providing the right codeword to this function. If anything goes wrong the state machine will go to WR_DIS state and can only recover from it through a reset (synchrous or asynchronous). If the Glikey SFR lock is active this operation will return an error.

Parameters:

base – [in] The base address of the Glikey instance
codeword – [in] Encoded word for progressing to next FSM state (see GLIKEY_CODEWORD_STEPx/EN)

Returns:

Status kStatus_Success if success Possible errors: kStatus_GLIKEY_LockedError, kStatus_Fail, kStatus_GLIKEY_DisabledError

status_t GLIKEY_EndOperation(GLIKEY_Type *base)

End Glikey operation.

This operation is used to end a Glikey operation. It can only be executed from the WR_EN, LOCKED and RESET states. Executing it from any other state will result in Glikey entering WR_DIS state. When this happens Glikey requires a reset (synchrous or asynchronous) to go back to INIT state. After this operation Glikey will go to INIT state or stay in LOCKED state when the index was locked. If the Glikey SFR lock is active this operation will return an error.

Parameters:

base – [in] The base address of the Glikey instance

Returns:

A code-flow protected error code (see nxpCsslFlowProtection)

Returns:

Status kStatus_Success if success, kStatus_GLIKEY_Locked if index is still locked Possible errors: kStatus_GLIKEY_LockedError, kStatus_GLIKEY_DisabledError

status_t GLIKEY_ResetIndex(GLIKEY_Type *base, uint32_t index)

Reset Glikey index.

This operation is used to reset a Glikey index. It can only be executed from the INIT state, executing it from any other state will result in Glikey entering WR_DIS state. When this happens Glikey requires a reset (synchrous or asynchronous) to go back to INIT state. If the Glikey SFR lock is active or the index is locked this operation will return an error.

Returns:: A code-flow protected error code (see nxpCsslFlowProtection)
Returns:: Status kStatus_Success if success, kStatus_GLIKEY_Locked if index is still locked Possible errors: kStatus_GLIKEY_LockedError, kStatus_GLIKEY_DisabledError

GLIKEY#

GPIO: General-Purpose Input/Output Driver#

FSL_GPIO_DRIVER_VERSION: GPIO driver version.

enum _gpio_pin_direction

GPIO direction definition.

Values:

enumerator kGPIO_DigitalInput: Set current pin as digital input

enumerator kGPIO_DigitalOutput: Set current pin as digital output

enum _gpio_checker_attribute

GPIO checker attribute.

Values:

enumerator kGPIO_UsernonsecureRWUsersecureRWPrivilegedsecureRW: User nonsecure:Read+Write; User Secure:Read+Write; Privileged Secure:Read+Write

enumerator kGPIO_UsernonsecureRUsersecureRWPrivilegedsecureRW: User nonsecure:Read; User Secure:Read+Write; Privileged Secure:Read+Write

enumerator kGPIO_UsernonsecureNUsersecureRWPrivilegedsecureRW: User nonsecure:None; User Secure:Read+Write; Privileged Secure:Read+Write

enumerator kGPIO_UsernonsecureRUsersecureRPrivilegedsecureRW: User nonsecure:Read; User Secure:Read; Privileged Secure:Read+Write

enumerator kGPIO_UsernonsecureNUsersecureRPrivilegedsecureRW: User nonsecure:None; User Secure:Read; Privileged Secure:Read+Write

enumerator kGPIO_UsernonsecureNUsersecureNPrivilegedsecureRW: User nonsecure:None; User Secure:None; Privileged Secure:Read+Write

enumerator kGPIO_UsernonsecureNUsersecureNPrivilegedsecureR: User nonsecure:None; User Secure:None; Privileged Secure:Read

enumerator kGPIO_UsernonsecureNUsersecureNPrivilegedsecureN: User nonsecure:None; User Secure:None; Privileged Secure:None

enumerator kGPIO_IgnoreAttributeCheck: Ignores the attribute check

enum _gpio_interrupt_config

Configures the interrupt generation condition.

Values:

enumerator kGPIO_InterruptStatusFlagDisabled: Interrupt status flag is disabled.

enumerator kGPIO_DMARisingEdge: ISF flag and DMA request on rising edge.

enumerator kGPIO_DMAFallingEdge: ISF flag and DMA request on falling edge.

enumerator kGPIO_DMAEitherEdge: ISF flag and DMA request on either edge.

enumerator kGPIO_FlagRisingEdge: Flag sets on rising edge.

enumerator kGPIO_FlagFallingEdge: Flag sets on falling edge.

enumerator kGPIO_FlagEitherEdge: Flag sets on either edge.

enumerator kGPIO_InterruptLogicZero: Interrupt when logic zero.

enumerator kGPIO_InterruptRisingEdge: Interrupt on rising edge.

enumerator kGPIO_InterruptFallingEdge: Interrupt on falling edge.

enumerator kGPIO_InterruptEitherEdge: Interrupt on either edge.

enumerator kGPIO_InterruptLogicOne: Interrupt when logic one.

enumerator kGPIO_ActiveHighTriggerOutputEnable: Enable active high-trigger output.

enumerator kGPIO_ActiveLowTriggerOutputEnable: Enable active low-trigger output.

enum _gpio_interrupt_selection

Configures the selection of interrupt/DMA request/trigger output.

Values:

enumerator kGPIO_InterruptOutput0: Interrupt/DMA request/trigger output 0.

enumerator kGPIO_InterruptOutput1: Interrupt/DMA request/trigger output 1.

enum gpio_pin_interrupt_control_t

GPIO pin and interrupt control.

Values:

enumerator kGPIO_PinControlNonSecure: Pin Control Non-Secure.

enumerator kGPIO_InterruptControlNonSecure: Interrupt Control Non-Secure.

enumerator kGPIO_PinControlNonPrivilege: Pin Control Non-Privilege.

enumerator kGPIO_InterruptControlNonPrivilege: Interrupt Control Non-Privilege.

typedef enum _gpio_pin_direction gpio_pin_direction_t: GPIO direction definition.

typedef enum _gpio_checker_attribute gpio_checker_attribute_t: GPIO checker attribute.

typedef struct _gpio_pin_config gpio_pin_config_t

The GPIO pin configuration structure.

Each pin can only be configured as either an output pin or an input pin at a time. If configured as an input pin, leave the outputConfig unused. Note that in some use cases, the corresponding port property should be configured in advance with the PORT_SetPinConfig().

typedef enum _gpio_interrupt_config gpio_interrupt_config_t: Configures the interrupt generation condition.

typedef enum _gpio_interrupt_selection gpio_interrupt_selection_t: Configures the selection of interrupt/DMA request/trigger output.

typedef struct _gpio_version_info gpio_version_info_t: GPIO version information.

GPIO_FIT_REG(value)

struct _gpio_pin_config

#include <fsl_gpio.h>

The GPIO pin configuration structure.

Public Members

gpio_pin_direction_t pinDirection: GPIO direction, input or output

uint8_t outputLogic: Set a default output logic, which has no use in input

struct _gpio_version_info

#include <fsl_gpio.h>

GPIO version information.

Public Members

uint16_t feature: Feature Specification Number.

uint8_t minor: Minor Version Number.

uint8_t major: Major Version Number.

GPIO Driver#

void GPIO_PortInit(GPIO_Type *base)

Initializes the GPIO peripheral.

This function ungates the GPIO clock.

Parameters:

base – GPIO peripheral base pointer.

void GPIO_PortDenit(GPIO_Type *base)

Denitializes the GPIO peripheral.

Parameters:

base – GPIO peripheral base pointer.

void GPIO_PinInit(GPIO_Type *base, uint32_t pin, const gpio_pin_config_t *config)

Initializes a GPIO pin used by the board.

To initialize the GPIO, define a pin configuration, as either input or output, in the user file. Then, call the GPIO_PinInit() function.

This is an example to define an input pin or an output pin configuration.

Define a digital input pin configuration,
gpio_pin_config_t config =
{
  kGPIO_DigitalInput,
  0,
}
Define a digital output pin configuration,
gpio_pin_config_t config =
{
  kGPIO_DigitalOutput,
  0,
}

Parameters:

base – GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
pin – GPIO port pin number
config – GPIO pin configuration pointer

void GPIO_GetVersionInfo(GPIO_Type *base, gpio_version_info_t *verInfo)

Get GPIO version information.

Parameters:

base – GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
verInfo – GPIO version information

static inline void GPIO_SecurePrivilegeLock(GPIO_Type *base, gpio_pin_interrupt_control_t mask)

lock or unlock secure privilege.

Parameters:

base – GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
mask – pin or interrupt macro

static inline void GPIO_EnablePinControlNonSecure(GPIO_Type *base, uint32_t mask)

Enable Pin Control Non-Secure.

Parameters:

base – GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
mask – GPIO pin number macro

static inline void GPIO_DisablePinControlNonSecure(GPIO_Type *base, uint32_t mask)

Disable Pin Control Non-Secure.

Parameters:

base – GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
mask – GPIO pin number macro

static inline void GPIO_EnablePinControlNonPrivilege(GPIO_Type *base, uint32_t mask)

Enable Pin Control Non-Privilege.

Parameters:

base – GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
mask – GPIO pin number macro

static inline void GPIO_DisablePinControlNonPrivilege(GPIO_Type *base, uint32_t mask)

Disable Pin Control Non-Privilege.

Parameters:

base – GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
mask – GPIO pin number macro

static inline void GPIO_EnableInterruptControlNonSecure(GPIO_Type *base, uint32_t mask)

Enable Interrupt Control Non-Secure.

Parameters:

base – GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
mask – GPIO pin number macro

static inline void GPIO_DisableInterruptControlNonSecure(GPIO_Type *base, uint32_t mask)

Disable Interrupt Control Non-Secure.

Parameters:

base – GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
mask – GPIO pin number macro

static inline void GPIO_EnableInterruptControlNonPrivilege(GPIO_Type *base, uint32_t mask)

Enable Interrupt Control Non-Privilege.

Parameters:

base – GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
mask – GPIO pin number macro

static inline void GPIO_DisableInterruptControlNonPrivilege(GPIO_Type *base, uint32_t mask)

Disable Interrupt Control Non-Privilege.

Parameters:

base – GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
mask – GPIO pin number macro

static inline void GPIO_PortInputEnable(GPIO_Type *base, uint32_t mask)

Enable port input.

Parameters:

base – GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
mask – GPIO pin number macro

static inline void GPIO_PortInputDisable(GPIO_Type *base, uint32_t mask)

Disable port input.

Parameters:

base – GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
mask – GPIO pin number macro

static inline void GPIO_PinWrite(GPIO_Type *base, uint32_t pin, uint8_t output)

Sets the output level of the multiple GPIO pins to the logic 1 or 0.

Parameters:

base – GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
pin – GPIO pin number
output – GPIO pin output logic level.
- 0: corresponding pin output low-logic level.
- 1: corresponding pin output high-logic level.

static inline void GPIO_PortSet(GPIO_Type *base, uint32_t mask)

Sets the output level of the multiple GPIO pins to the logic 1.

Parameters:

base – GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
mask – GPIO pin number macro

static inline void GPIO_PortClear(GPIO_Type *base, uint32_t mask)

Sets the output level of the multiple GPIO pins to the logic 0.

Parameters:

base – GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
mask – GPIO pin number macro

static inline void GPIO_PortToggle(GPIO_Type *base, uint32_t mask)

Reverses the current output logic of the multiple GPIO pins.

Parameters:

base – GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
mask – GPIO pin number macro

static inline uint32_t GPIO_PinRead(GPIO_Type *base, uint32_t pin)

Reads the current input value of the GPIO port.

Parameters:

base – GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
pin – GPIO pin number

Return values:

GPIO – port input value

0: corresponding pin input low-logic level.
1: corresponding pin input high-logic level.

static inline void GPIO_SetPinInterruptConfig(GPIO_Type *base, uint32_t pin, gpio_interrupt_config_t config)

Configures the gpio pin interrupt/DMA request.

Parameters:

base – GPIO peripheral base pointer.
pin – GPIO pin number.
config – GPIO pin interrupt configuration.
- kGPIO_InterruptStatusFlagDisabled: Interrupt/DMA request disabled.
- kGPIO_DMARisingEdge : DMA request on rising edge(if the DMA requests exit).
- kGPIO_DMAFallingEdge: DMA request on falling edge(if the DMA requests exit).
- kGPIO_DMAEitherEdge : DMA request on either edge(if the DMA requests exit).
- kGPIO_FlagRisingEdge : Flag sets on rising edge(if the Flag states exit).
- kGPIO_FlagFallingEdge : Flag sets on falling edge(if the Flag states exit).
- kGPIO_FlagEitherEdge : Flag sets on either edge(if the Flag states exit).
- kGPIO_InterruptLogicZero : Interrupt when logic zero.
- kGPIO_InterruptRisingEdge : Interrupt on rising edge.
- kGPIO_InterruptFallingEdge: Interrupt on falling edge.
- kGPIO_InterruptEitherEdge : Interrupt on either edge.
- kGPIO_InterruptLogicOne : Interrupt when logic one.
- kGPIO_ActiveHighTriggerOutputEnable : Enable active high-trigger output (if the trigger states exit).
- kGPIO_ActiveLowTriggerOutputEnable : Enable active low-trigger output (if the trigger states exit).

static inline void GPIO_SetPinInterruptChannel(GPIO_Type *base, uint32_t pin, gpio_interrupt_selection_t selection)

Configures the gpio pin interrupt/DMA request/trigger output channel selection.

Parameters:

base – GPIO peripheral base pointer.
pin – GPIO pin number.
selection – GPIO pin interrupt output selection.
- kGPIO_InterruptOutput0: Interrupt/DMA request/trigger output 0.
- kGPIO_InterruptOutput1 : Interrupt/DMA request/trigger output 1.

uint32_t GPIO_GpioGetInterruptFlags(GPIO_Type *base)

Read the GPIO interrupt status flags.

Parameters:

base – GPIO peripheral base pointer. (GPIOA, GPIOB, GPIOC, and so on.)

Returns:

The current GPIO’s interrupt status flag. ‘1’ means the related pin’s flag is set, ‘0’ means the related pin’s flag not set. For example, the return value 0x00010001 means the pin 0 and 17 have the interrupt pending.

uint32_t GPIO_GpioGetInterruptChannelFlags(GPIO_Type *base, uint32_t channel)

Read the GPIO interrupt status flags based on selected interrupt channel(IRQS).

Parameters:

base – GPIO peripheral base pointer. (GPIOA, GPIOB, GPIOC, and so on.)
channel – ‘0’ means selete interrupt channel 0, ‘1’ means selete interrupt channel 1.

Returns:

The current GPIO’s interrupt status flag based on the selected interrupt channel. ‘1’ means the related pin’s flag is set, ‘0’ means the related pin’s flag not set. For example, the return value 0x00010001 means the pin 0 and 17 have the interrupt pending.

uint8_t GPIO_PinGetInterruptFlag(GPIO_Type *base, uint32_t pin)

Read individual pin’s interrupt status flag.

Parameters:

base – GPIO peripheral base pointer. (GPIOA, GPIOB, GPIOC, and so on)
pin – GPIO specific pin number.

Returns:

The current selected pin’s interrupt status flag.

void GPIO_GpioClearInterruptFlags(GPIO_Type *base, uint32_t mask)

Clears GPIO pin interrupt status flags.

Parameters:

base – GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
mask – GPIO pin number macro

void GPIO_GpioClearInterruptChannelFlags(GPIO_Type *base, uint32_t mask, uint32_t channel)

Clears GPIO pin interrupt status flags based on selected interrupt channel(IRQS).

Parameters:

base – GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
mask – GPIO pin number macro
channel – ‘0’ means selete interrupt channel 0, ‘1’ means selete interrupt channel 1.

void GPIO_PinClearInterruptFlag(GPIO_Type *base, uint32_t pin)

Clear GPIO individual pin’s interrupt status flag.

Parameters:

base – GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on).
pin – GPIO specific pin number.

static inline void GPIO_SetMultipleInterruptPinsConfig(GPIO_Type *base, uint32_t mask, gpio_interrupt_config_t config)

Sets the GPIO interrupt configuration in PCR register for multiple pins.

Parameters:

base – GPIO peripheral base pointer.
mask – GPIO pin number macro.
config – GPIO pin interrupt configuration.
- kGPIO_InterruptStatusFlagDisabled: Interrupt disabled.
- kGPIO_DMARisingEdge : DMA request on rising edge(if the DMA requests exit).
- kGPIO_DMAFallingEdge: DMA request on falling edge(if the DMA requests exit).
- kGPIO_DMAEitherEdge : DMA request on either edge(if the DMA requests exit).
- kGPIO_FlagRisingEdge : Flag sets on rising edge(if the Flag states exit).
- kGPIO_FlagFallingEdge : Flag sets on falling edge(if the Flag states exit).
- kGPIO_FlagEitherEdge : Flag sets on either edge(if the Flag states exit).
- kGPIO_InterruptLogicZero : Interrupt when logic zero.
- kGPIO_InterruptRisingEdge : Interrupt on rising edge.
- kGPIO_InterruptFallingEdge: Interrupt on falling edge.
- kGPIO_InterruptEitherEdge : Interrupt on either edge.
- kGPIO_InterruptLogicOne : Interrupt when logic one.
- kGPIO_ActiveHighTriggerOutputEnable : Enable active high-trigger output (if the trigger states exit).
- kGPIO_ActiveLowTriggerOutputEnable : Enable active low-trigger output (if the trigger states exit)..

void GPIO_CheckAttributeBytes(GPIO_Type *base, gpio_checker_attribute_t attribute)

brief The GPIO module supports a device-specific number of data ports, organized as 32-bit words/8-bit Bytes. Each 32-bit/8-bit data port includes a GACR register, which defines the byte-level attributes required for a successful access to the GPIO programming model. If the GPIO module’s GACR register organized as 32-bit words, the attribute controls for the 4 data bytes in the GACR follow a standard little endian data convention.

Parameters:

base – GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
attribute – GPIO checker attribute

GPIO_PortGetInterruptFlags(base)

GPIO_PortClearInterruptFlags(base, mask)

I3C: I3C Driver#

FSL_I3C_DRIVER_VERSION: I3C driver version.

I3C status return codes.

Values:

enumerator kStatus_I3C_Busy: The master is already performing a transfer.

enumerator kStatus_I3C_Idle: The slave driver is idle.

enumerator kStatus_I3C_Nak: The slave device sent a NAK in response to an address.

enumerator kStatus_I3C_WriteAbort: The slave device sent a NAK in response to a write.

enumerator kStatus_I3C_Term: The master terminates slave read.

enumerator kStatus_I3C_HdrParityError: Parity error from DDR read.

enumerator kStatus_I3C_CrcError: CRC error from DDR read.

enumerator kStatus_I3C_ReadFifoError: Read from M/SRDATAB register when FIFO empty.

enumerator kStatus_I3C_WriteFifoError: Write to M/SWDATAB register when FIFO full.

enumerator kStatus_I3C_MsgError: Message SDR/DDR mismatch or read/write message in wrong state

enumerator kStatus_I3C_InvalidReq: Invalid use of request.

enumerator kStatus_I3C_Timeout: The module has stalled too long in a frame.

enumerator kStatus_I3C_SlaveCountExceed: The I3C slave count has exceed the definition in I3C_MAX_DEVCNT.

enumerator kStatus_I3C_IBIWon: The I3C slave event IBI or MR or HJ won the arbitration on a header address.

enumerator kStatus_I3C_OverrunError: Slave internal from-bus buffer/FIFO overrun.

enumerator kStatus_I3C_UnderrunError: Slave internal to-bus buffer/FIFO underrun

enumerator kStatus_I3C_UnderrunNak: Slave internal from-bus buffer/FIFO underrun and NACK error

enumerator kStatus_I3C_InvalidStart: Slave invalid start flag

enumerator kStatus_I3C_SdrParityError: SDR parity error

enumerator kStatus_I3C_S0S1Error: S0 or S1 error

enum _i3c_hdr_mode

I3C HDR modes.

Values:

enumerator kI3C_HDRModeNone

enumerator kI3C_HDRModeDDR

enumerator kI3C_HDRModeTSP

enumerator kI3C_HDRModeTSL

typedef enum _i3c_hdr_mode i3c_hdr_mode_t: I3C HDR modes.

typedef struct _i3c_device_info i3c_device_info_t: I3C device information.

I3C_RETRY_TIMES

Max loops to wait for I3C operation status complete.

This is the maximum number of loops to wait for I3C operation status complete. If set to 0, it will wait indefinitely.

I3C_MAX_DEVCNT

I3C_IBI_BUFF_SIZE

struct _i3c_device_info

#include <fsl_i3c.h>

I3C device information.

Public Members

uint8_t dynamicAddr: Device dynamic address.

uint8_t staticAddr: Static address.

uint8_t dcr: Device characteristics register information.

uint8_t bcr: Bus characteristics register information.

uint16_t vendorID: Device vendor ID(manufacture ID).

uint32_t partNumber: Device part number info

uint16_t maxReadLength: Maximum read length.

uint16_t maxWriteLength: Maximum write length.

uint8_t hdrMode: Support hdr mode, could be OR logic in i3c_hdr_mode.

I3C Common Driver#

typedef struct _i3c_config i3c_config_t

Structure with settings to initialize the I3C module, could both initialize master and slave functionality.

This structure holds configuration settings for the I3C peripheral. To initialize this structure to reasonable defaults, call the I3C_GetDefaultConfig() function and pass a pointer to your configuration structure instance.

The configuration structure can be made constant so it resides in flash.

uint32_t I3C_GetInstance(I3C_Type *base)

Get which instance current I3C is used.

Parameters:

base – The I3C peripheral base address.

void I3C_GetDefaultConfig(i3c_config_t *config)

Provides a default configuration for the I3C peripheral, the configuration covers both master functionality and slave functionality.

This function provides the following default configuration for I3C:

config->disableTimeout config->hKeep config->enableOpenDrainStop config->enableOpenDrainHigh config->baudRate_Hzconfig->baudRate_Hzconfig->baudRate_Hzconfig->masterDynamicAddress config->slowClock_Hz config->enableSlave config->vendorID config->enableRandomPart config->partNumber config->dcr config->bcr config->hdrMode config->nakAllRequest config->ignoreS0S1Error config->offline config->matchSlaveStartStop 

notranslate">

config->enableMaster                 = kI3C_MasterCapable; = false; = kI3C_MasterHighKeeperNone; = true; = true; class="o">.i2cBaud          = 400000U; class="o">.i3cPushPullBaud  = 12500000U; class="o">.i3cOpenDrainBaud = 2500000U; = 0x0AU; = 1000000U; = true; = 0x11BU; = false; = 0; = 0; = 0; = (uint8_t)kI3C_HDRModeDDR; = false; = false; = false; = false;
After calling this function, you can override any settings in order to customize the configuration, prior to initializing the common I3C driver with I3C_Init().

Parameters:

config – [out] User provided configuration structure for default values. Refer to i3c_config_t. 







void I3C_Init(I3C_Type *base, const i3c_config_t *config, uint32_t sourceClock_Hz)

Initializes the I3C peripheral. This function enables the peripheral clock and initializes the I3C peripheral as described by the user provided configuration. This will initialize both the master peripheral and slave peripheral so that I3C module could work as pure master, pure slave or secondary master, etc. A software reset is performed prior to configuration. 

Parameters:

base – The I3C peripheral base address. 
config – User provided peripheral configuration. Use I3C_GetDefaultConfig() to get a set of defaults that you can override. 
sourceClock_Hz – Frequency in Hertz of the I3C functional clock. Used to calculate the baud rate divisors, filter widths, and timeout periods. 







struct _i3c_config


#include <fsl_i3c.h>
Structure with settings to initialize the I3C module, could both initialize master and slave functionality. 
This structure holds configuration settings for the I3C peripheral. To initialize this structure to reasonable defaults, call the I3C_GetDefaultConfig() function and pass a pointer to your configuration structure instance.
The configuration structure can be made constant so it resides in flash. 

Public Members


i3c_master_enable_t enableMaster

Enable master mode. 




bool disableTimeout

Whether to disable timeout to prevent the ERRWARN. 




i3c_master_hkeep_t hKeep

High keeper mode setting. 




bool enableOpenDrainStop

Whether to emit open-drain speed STOP. 




bool enableOpenDrainHigh

Enable Open-Drain High to be 1 PPBAUD count for i3c messages, or 1 ODBAUD. 




i3c_baudrate_hz_t baudRate_Hz

Desired baud rate settings. 




i3c_start_scl_delay_t startSclDelay

I3C SCL delay after START. 




i3c_start_scl_delay_t restartSclDelay

I3C SCL delay after Repeated START. 




uint8_t masterDynamicAddress

Main master dynamic address configuration. 




uint32_t maxWriteLength

Maximum write length. 




uint32_t maxReadLength

Maximum read length. 




bool enableSlave

Whether to enable slave. 




uint8_t staticAddr

Static address. 




uint16_t vendorID

Device vendor ID(manufacture ID). 




uint32_t partNumber

Device part number info 




uint8_t dcr

Device characteristics register information. 




uint8_t bcr

Bus characteristics register information. 




uint8_t hdrMode

Support hdr mode, could be OR logic in enumeration:i3c_hdr_mode_t. 




bool nakAllRequest

Whether to reply NAK to all requests except broadcast CCC. 




bool ignoreS0S1Error

Whether to ignore S0/S1 error in SDR mode. 




bool offline

Whether to wait 60 us of bus quiet or HDR request to ensure slave track SDR mode safely. 




bool matchSlaveStartStop

Whether to assert start/stop status only the time slave is addressed. 







I3C Master Driver#


void I3C_MasterGetDefaultConfig(i3c_master_config_t *masterConfig)

Provides a default configuration for the I3C master peripheral. 
This function provides the following default configuration for the I3C master peripheral: 
masterConfig->enableMaster            = kI3C_MasterOn;
masterConfig->disableTimeout          = false;
masterConfig->hKeep                   = kI3C_MasterHighKeeperNone;
masterConfig->enableOpenDrainStop     = true;
masterConfig->enableOpenDrainHigh     = true;
masterConfig->baudRate_Hz             = 100000U;
masterConfig->busType                 = kI3C_TypeI2C;



After calling this function, you can override any settings in order to customize the configuration, prior to initializing the master driver with I3C_MasterInit().

Parameters:

masterConfig – [out] User provided configuration structure for default values. Refer to i3c_master_config_t. 







void I3C_MasterInit(I3C_Type *base, const i3c_master_config_t *masterConfig, uint32_t sourceClock_Hz)

Initializes the I3C master peripheral. 
This function enables the peripheral clock and initializes the I3C master peripheral as described by the user provided configuration. A software reset is performed prior to configuration.

Parameters:

base – The I3C peripheral base address. 
masterConfig – User provided peripheral configuration. Use I3C_MasterGetDefaultConfig() to get a set of defaults that you can override. 
sourceClock_Hz – Frequency in Hertz of the I3C functional clock. Used to calculate the baud rate divisors, filter widths, and timeout periods. 







void I3C_MasterDeinit(I3C_Type *base)

Deinitializes the I3C master peripheral. 
This function disables the I3C master peripheral and gates the clock. It also performs a software reset to restore the peripheral to reset conditions.

Parameters:

base – The I3C peripheral base address. 







status_t I3C_MasterCheckAndClearError(I3C_Type *base, uint32_t status)





status_t I3C_MasterWaitForCtrlDone(I3C_Type *base, bool waitIdle)





status_t I3C_CheckForBusyBus(I3C_Type *base)





static inline void I3C_MasterEnable(I3C_Type *base, i3c_master_enable_t enable)

Set I3C module master mode. 

Parameters:

base – The I3C peripheral base address. 
enable – Enable master mode. 







void I3C_SlaveGetDefaultConfig(i3c_slave_config_t *slaveConfig)

Provides a default configuration for the I3C slave peripheral. 
This function provides the following default configuration for the I3C slave peripheral: 
slaveConfig->enableslave             = true;



After calling this function, you can override any settings in order to customize the configuration, prior to initializing the slave driver with I3C_SlaveInit().

Parameters:

slaveConfig – [out] User provided configuration structure for default values. Refer to i3c_slave_config_t. 







void I3C_SlaveInit(I3C_Type *base, const i3c_slave_config_t *slaveConfig, uint32_t slowClock_Hz)

Initializes the I3C slave peripheral. 
This function enables the peripheral clock and initializes the I3C slave peripheral as described by the user provided configuration.

Parameters:

base – The I3C peripheral base address. 
slaveConfig – User provided peripheral configuration. Use I3C_SlaveGetDefaultConfig() to get a set of defaults that you can override. 
slowClock_Hz – Frequency in Hertz of the I3C slow clock. Used to calculate the bus match condition values. If FSL_FEATURE_I3C_HAS_NO_SCONFIG_BAMATCH defines as 1, this parameter is useless. 







void I3C_SlaveDeinit(I3C_Type *base)

Deinitializes the I3C slave peripheral. 
This function disables the I3C slave peripheral and gates the clock.

Parameters:

base – The I3C peripheral base address. 







static inline void I3C_SlaveEnable(I3C_Type *base, bool isEnable)

Enable/Disable Slave. 

Parameters:

base – The I3C peripheral base address. 
isEnable – Enable or disable. 







static inline uint32_t I3C_MasterGetStatusFlags(I3C_Type *base)

Gets the I3C master status flags. 
A bit mask with the state of all I3C master status flags is returned. For each flag, the corresponding bit in the return value is set if the flag is asserted.

See also
_i3c_master_flags



Parameters:

base – The I3C peripheral base address. 


Returns:
State of the status flags:

1: related status flag is set.
0: related status flag is not set. 








static inline void I3C_MasterClearStatusFlags(I3C_Type *base, uint32_t statusMask)

Clears the I3C master status flag state. 
The following status register flags can be cleared:

kI3C_MasterSlaveStartFlag
kI3C_MasterControlDoneFlag
kI3C_MasterCompleteFlag
kI3C_MasterArbitrationWonFlag
kI3C_MasterSlave2MasterFlag


Attempts to clear other flags has no effect.

See also
_i3c_master_flags. 



Parameters:

base – The I3C peripheral base address. 
statusMask – A bitmask of status flags that are to be cleared. The mask is composed of _i3c_master_flags enumerators OR’d together. You may pass the result of a previous call to I3C_MasterGetStatusFlags(). 







static inline uint32_t I3C_MasterGetErrorStatusFlags(I3C_Type *base)

Gets the I3C master error status flags. 
A bit mask with the state of all I3C master error status flags is returned. For each flag, the corresponding bit in the return value is set if the flag is asserted.

See also
_i3c_master_error_flags



Parameters:

base – The I3C peripheral base address. 


Returns:
State of the error status flags:

1: related status flag is set.
0: related status flag is not set. 








static inline void I3C_MasterClearErrorStatusFlags(I3C_Type *base, uint32_t statusMask)

Clears the I3C master error status flag state. 

See also
_i3c_master_error_flags. 



Parameters:

base – The I3C peripheral base address. 
statusMask – A bitmask of error status flags that are to be cleared. The mask is composed of _i3c_master_error_flags enumerators OR’d together. You may pass the result of a previous call to I3C_MasterGetStatusFlags(). 







i3c_master_state_t I3C_MasterGetState(I3C_Type *base)

Gets the I3C master state. 

Parameters:

base – The I3C peripheral base address. 


Returns:
I3C master state. 






static inline uint32_t I3C_SlaveGetStatusFlags(I3C_Type *base)

Gets the I3C slave status flags. 
A bit mask with the state of all I3C slave status flags is returned. For each flag, the corresponding bit in the return value is set if the flag is asserted.

See also
_i3c_slave_flags



Parameters:

base – The I3C peripheral base address. 


Returns:
State of the status flags:

1: related status flag is set.
0: related status flag is not set. 








static inline void I3C_SlaveClearStatusFlags(I3C_Type *base, uint32_t statusMask)

Clears the I3C slave status flag state. 
The following status register flags can be cleared:

kI3C_SlaveBusStartFlag
kI3C_SlaveMatchedFlag
kI3C_SlaveBusStopFlag


Attempts to clear other flags has no effect.

See also
_i3c_slave_flags. 



Parameters:

base – The I3C peripheral base address. 
statusMask – A bitmask of status flags that are to be cleared. The mask is composed of _i3c_slave_flags enumerators OR’d together. You may pass the result of a previous call to I3C_SlaveGetStatusFlags(). 







static inline uint32_t I3C_SlaveGetErrorStatusFlags(I3C_Type *base)

Gets the I3C slave error status flags. 
A bit mask with the state of all I3C slave error status flags is returned. For each flag, the corresponding bit in the return value is set if the flag is asserted.

See also
_i3c_slave_error_flags



Parameters:

base – The I3C peripheral base address. 


Returns:
State of the error status flags:

1: related status flag is set.
0: related status flag is not set. 








static inline void I3C_SlaveClearErrorStatusFlags(I3C_Type *base, uint32_t statusMask)

Clears the I3C slave error status flag state. 

See also
_i3c_slave_error_flags. 



Parameters:

base – The I3C peripheral base address. 
statusMask – A bitmask of error status flags that are to be cleared. The mask is composed of _i3c_slave_error_flags enumerators OR’d together. You may pass the result of a previous call to I3C_SlaveGetErrorStatusFlags(). 







i3c_slave_activity_state_t I3C_SlaveGetActivityState(I3C_Type *base)

Gets the I3C slave state. 

Parameters:

base – The I3C peripheral base address. 


Returns:
I3C slave activity state, refer i3c_slave_activity_state_t. 






status_t I3C_SlaveCheckAndClearError(I3C_Type *base, uint32_t status)





static inline void I3C_MasterEnableInterrupts(I3C_Type *base, uint32_t interruptMask)

Enables the I3C master interrupt requests. 
All flags except kI3C_MasterBetweenFlag and kI3C_MasterNackDetectFlag can be enabled as interrupts.

Parameters:

base – The I3C peripheral base address. 
interruptMask – Bit mask of interrupts to enable. See _i3c_master_flags for the set of constants that should be OR’d together to form the bit mask. 







static inline void I3C_MasterDisableInterrupts(I3C_Type *base, uint32_t interruptMask)

Disables the I3C master interrupt requests. 
All flags except kI3C_MasterBetweenFlag and kI3C_MasterNackDetectFlag can be enabled as interrupts.

Parameters:

base – The I3C peripheral base address. 
interruptMask – Bit mask of interrupts to disable. See _i3c_master_flags for the set of constants that should be OR’d together to form the bit mask. 







static inline uint32_t I3C_MasterGetEnabledInterrupts(I3C_Type *base)

Returns the set of currently enabled I3C master interrupt requests. 

Parameters:

base – The I3C peripheral base address. 


Returns:
A bitmask composed of _i3c_master_flags enumerators OR’d together to indicate the set of enabled interrupts. 






static inline uint32_t I3C_MasterGetPendingInterrupts(I3C_Type *base)

Returns the set of pending I3C master interrupt requests. 

Parameters:

base – The I3C peripheral base address. 


Returns:
A bitmask composed of _i3c_master_flags enumerators OR’d together to indicate the set of pending interrupts. 






static inline void I3C_SlaveEnableInterrupts(I3C_Type *base, uint32_t interruptMask)

Enables the I3C slave interrupt requests. 
Only below flags can be enabled as interrupts.

kI3C_SlaveBusStartFlag
kI3C_SlaveMatchedFlag
kI3C_SlaveBusStopFlag
kI3C_SlaveRxReadyFlag
kI3C_SlaveTxReadyFlag
kI3C_SlaveDynamicAddrChangedFlag
kI3C_SlaveReceivedCCCFlag
kI3C_SlaveErrorFlag
kI3C_SlaveHDRCommandMatchFlag
kI3C_SlaveCCCHandledFlag
kI3C_SlaveEventSentFlag



Parameters:

base – The I3C peripheral base address. 
interruptMask – Bit mask of interrupts to enable. See _i3c_slave_flags for the set of constants that should be OR’d together to form the bit mask. 







static inline void I3C_SlaveDisableInterrupts(I3C_Type *base, uint32_t interruptMask)

Disables the I3C slave interrupt requests. 
Only below flags can be disabled as interrupts.

kI3C_SlaveBusStartFlag
kI3C_SlaveMatchedFlag
kI3C_SlaveBusStopFlag
kI3C_SlaveRxReadyFlag
kI3C_SlaveTxReadyFlag
kI3C_SlaveDynamicAddrChangedFlag
kI3C_SlaveReceivedCCCFlag
kI3C_SlaveErrorFlag
kI3C_SlaveHDRCommandMatchFlag
kI3C_SlaveCCCHandledFlag
kI3C_SlaveEventSentFlag



Parameters:

base – The I3C peripheral base address. 
interruptMask – Bit mask of interrupts to disable. See _i3c_slave_flags for the set of constants that should be OR’d together to form the bit mask. 







static inline uint32_t I3C_SlaveGetEnabledInterrupts(I3C_Type *base)

Returns the set of currently enabled I3C slave interrupt requests. 

Parameters:

base – The I3C peripheral base address. 


Returns:
A bitmask composed of _i3c_slave_flags enumerators OR’d together to indicate the set of enabled interrupts. 






static inline uint32_t I3C_SlaveGetPendingInterrupts(I3C_Type *base)

Returns the set of pending I3C slave interrupt requests. 

Parameters:

base – The I3C peripheral base address. 


Returns:
A bitmask composed of _i3c_slave_flags enumerators OR’d together to indicate the set of pending interrupts. 






static inline void I3C_MasterEnableDMA(I3C_Type *base, bool enableTx, bool enableRx, uint32_t width)

Enables or disables I3C master DMA requests. 

Parameters:

base – The I3C peripheral base address. 
enableTx – Enable flag for transmit DMA request. Pass true for enable, false for disable. 
enableRx – Enable flag for receive DMA request. Pass true for enable, false for disable. 
width – DMA read/write unit in bytes. 







static inline uint32_t I3C_MasterGetTxFifoAddress(I3C_Type *base, uint32_t width)

Gets I3C master transmit data register address for DMA transfer. 

Parameters:

base – The I3C peripheral base address. 
width – DMA read/write unit in bytes. 


Returns:
The I3C Master Transmit Data Register address. 






static inline uint32_t I3C_MasterGetRxFifoAddress(I3C_Type *base, uint32_t width)

Gets I3C master receive data register address for DMA transfer. 

Parameters:

base – The I3C peripheral base address. 
width – DMA read/write unit in bytes. 


Returns:
The I3C Master Receive Data Register address. 






static inline void I3C_SlaveEnableDMA(I3C_Type *base, bool enableTx, bool enableRx, uint32_t width)

Enables or disables I3C slave DMA requests. 

Parameters:

base – The I3C peripheral base address. 
enableTx – Enable flag for transmit DMA request. Pass true for enable, false for disable. 
enableRx – Enable flag for receive DMA request. Pass true for enable, false for disable. 
width – DMA read/write unit in bytes. 







static inline uint32_t I3C_SlaveGetTxFifoAddress(I3C_Type *base, uint32_t width)

Gets I3C slave transmit data register address for DMA transfer. 

Parameters:

base – The I3C peripheral base address. 
width – DMA read/write unit in bytes. 


Returns:
The I3C Slave Transmit Data Register address. 






static inline uint32_t I3C_SlaveGetRxFifoAddress(I3C_Type *base, uint32_t width)

Gets I3C slave receive data register address for DMA transfer. 

Parameters:

base – The I3C peripheral base address. 
width – DMA read/write unit in bytes. 


Returns:
The I3C Slave Receive Data Register address. 






static inline void I3C_MasterSetWatermarks(I3C_Type *base, i3c_tx_trigger_level_t txLvl, i3c_rx_trigger_level_t rxLvl, bool flushTx, bool flushRx)

Sets the watermarks for I3C master FIFOs. 

Parameters:

base – The I3C peripheral base address. 
txLvl – Transmit FIFO watermark level. The kI3C_MasterTxReadyFlag flag is set whenever the number of words in the transmit FIFO reaches txLvl. 
rxLvl – Receive FIFO watermark level. The kI3C_MasterRxReadyFlag flag is set whenever the number of words in the receive FIFO reaches rxLvl. 
flushTx – true if TX FIFO is to be cleared, otherwise TX FIFO remains unchanged. 
flushRx – true if RX FIFO is to be cleared, otherwise RX FIFO remains unchanged. 







static inline void I3C_MasterGetFifoCounts(I3C_Type *base, size_t *rxCount, size_t *txCount)

Gets the current number of bytes in the I3C master FIFOs. 

Parameters:

base – The I3C peripheral base address. 
txCount – [out] Pointer through which the current number of bytes in the transmit FIFO is returned. Pass NULL if this value is not required. 
rxCount – [out] Pointer through which the current number of bytes in the receive FIFO is returned. Pass NULL if this value is not required. 







static inline void I3C_SlaveSetWatermarks(I3C_Type *base, i3c_tx_trigger_level_t txLvl, i3c_rx_trigger_level_t rxLvl, bool flushTx, bool flushRx)

Sets the watermarks for I3C slave FIFOs. 

Parameters:

base – The I3C peripheral base address. 
txLvl – Transmit FIFO watermark level. The kI3C_SlaveTxReadyFlag flag is set whenever the number of words in the transmit FIFO reaches txLvl. 
rxLvl – Receive FIFO watermark level. The kI3C_SlaveRxReadyFlag flag is set whenever the number of words in the receive FIFO reaches rxLvl. 
flushTx – true if TX FIFO is to be cleared, otherwise TX FIFO remains unchanged. 
flushRx – true if RX FIFO is to be cleared, otherwise RX FIFO remains unchanged. 







static inline void I3C_SlaveGetFifoCounts(I3C_Type *base, size_t *rxCount, size_t *txCount)

Gets the current number of bytes in the I3C slave FIFOs. 

Parameters:

base – The I3C peripheral base address. 
txCount – [out] Pointer through which the current number of bytes in the transmit FIFO is returned. Pass NULL if this value is not required. 
rxCount – [out] Pointer through which the current number of bytes in the receive FIFO is returned. Pass NULL if this value is not required. 







void I3C_MasterSetBaudRate(I3C_Type *base, const i3c_baudrate_hz_t *baudRate_Hz, uint32_t sourceClock_Hz)

Sets the I3C bus frequency for master transactions. 
The I3C master is automatically disabled and re-enabled as necessary to configure the baud rate. Do not call this function during a transfer, or the transfer is aborted.

Parameters:

base – The I3C peripheral base address. 
baudRate_Hz – Pointer to structure of requested bus frequency in Hertz. 
sourceClock_Hz – I3C functional clock frequency in Hertz. 







static inline bool I3C_MasterGetBusIdleState(I3C_Type *base)

Returns whether the bus is idle. 
Requires the master mode to be enabled.

Parameters:

base – The I3C peripheral base address. 


Return values:

true – Bus is busy. 
false – Bus is idle. 







status_t I3C_MasterStartWithRxSize(I3C_Type *base, i3c_bus_type_t type, uint8_t address, i3c_direction_t dir, uint8_t rxSize)

Sends a START signal and slave address on the I2C/I3C bus, receive size is also specified in the call. 
This function is used to initiate a new master mode transfer. First, the bus state is checked to ensure that another master is not occupying the bus. Then a START signal is transmitted, followed by the 7-bit address specified in the a address parameter. Note that this function does not actually wait until the START and address are successfully sent on the bus before returning.

Parameters:

base – The I3C peripheral base address. 
type – The bus type to use in this transaction. 
address – 7-bit slave device address, in bits [6:0]. 
dir – Master transfer direction, either kI3C_Read or kI3C_Write. This parameter is used to set the R/w bit (bit 0) in the transmitted slave address. 
rxSize – Read terminate size for the followed read transfer, limit to 255 bytes. 


Return values:

kStatus_Success – START signal and address were successfully enqueued in the transmit FIFO. 
kStatus_I3C_Busy – Another master is currently utilizing the bus. 







status_t I3C_MasterStart(I3C_Type *base, i3c_bus_type_t type, uint8_t address, i3c_direction_t dir)

Sends a START signal and slave address on the I2C/I3C bus. 
This function is used to initiate a new master mode transfer. First, the bus state is checked to ensure that another master is not occupying the bus. Then a START signal is transmitted, followed by the 7-bit address specified in the address parameter. Note that this function does not actually wait until the START and address are successfully sent on the bus before returning.

Parameters:

base – The I3C peripheral base address. 
type – The bus type to use in this transaction. 
address – 7-bit slave device address, in bits [6:0]. 
dir – Master transfer direction, either kI3C_Read or kI3C_Write. This parameter is used to set the R/w bit (bit 0) in the transmitted slave address. 


Return values:

kStatus_Success – START signal and address were successfully enqueued in the transmit FIFO. 
kStatus_I3C_Busy – Another master is currently utilizing the bus. 







status_t I3C_MasterRepeatedStartWithRxSize(I3C_Type *base, i3c_bus_type_t type, uint8_t address, i3c_direction_t dir, uint8_t rxSize)

Sends a repeated START signal and slave address on the I2C/I3C bus, receive size is also specified in the call. 
This function is used to send a Repeated START signal when a transfer is already in progress. Like I3C_MasterStart(), it also sends the specified 7-bit address. Call this API also configures the read terminate size for the following read transfer. For example, set the rxSize = 2, the following read transfer will be terminated after two bytes of data received. Write transfer will not be affected by the rxSize configuration.

Note
This function exists primarily to maintain compatible APIs between I3C and I2C drivers, as well as to better document the intent of code that uses these APIs.


Parameters:

base – The I3C peripheral base address. 
type – The bus type to use in this transaction. 
address – 7-bit slave device address, in bits [6:0]. 
dir – Master transfer direction, either kI3C_Read or kI3C_Write. This parameter is used to set the R/w bit (bit 0) in the transmitted slave address. 
rxSize – Read terminate size for the followed read transfer, limit to 255 bytes. 


Return values:
kStatus_Success – Repeated START signal and address were successfully enqueued in the transmit FIFO. 






static inline status_t I3C_MasterRepeatedStart(I3C_Type *base, i3c_bus_type_t type, uint8_t address, i3c_direction_t dir)

Sends a repeated START signal and slave address on the I2C/I3C bus. 
This function is used to send a Repeated START signal when a transfer is already in progress. Like I3C_MasterStart(), it also sends the specified 7-bit address.

Note
This function exists primarily to maintain compatible APIs between I3C and I2C drivers, as well as to better document the intent of code that uses these APIs.


Parameters:

base – The I3C peripheral base address. 
type – The bus type to use in this transaction. 
address – 7-bit slave device address, in bits [6:0]. 
dir – Master transfer direction, either kI3C_Read or kI3C_Write. This parameter is used to set the R/w bit (bit 0) in the transmitted slave address. 


Return values:
kStatus_Success – Repeated START signal and address were successfully enqueued in the transmit FIFO. 






status_t I3C_MasterSend(I3C_Type *base, const void *txBuff, size_t txSize, uint32_t flags)

Performs a polling send transfer on the I2C/I3C bus. 
Sends up to txSize number of bytes to the previously addressed slave device. The slave may reply with a NAK to any byte in order to terminate the transfer early. If this happens, this function returns kStatus_I3C_Nak.

Parameters:

base – The I3C peripheral base address. 
txBuff – The pointer to the data to be transferred. 
txSize – The length in bytes of the data to be transferred. 
flags – Bit mask of options for the transfer. See enumeration _i3c_master_transfer_flags for available options. 


Return values:

kStatus_Success – Data was sent successfully. 
kStatus_I3C_Busy – Another master is currently utilizing the bus. 
kStatus_I3C_Timeout – The module has stalled too long in a frame. 
kStatus_I3C_Nak – The slave device sent a NAK in response to an address. 
kStatus_I3C_WriteAbort – The slave device sent a NAK in response to a write. 
kStatus_I3C_MsgError – Message SDR/DDR mismatch or read/write message in wrong state. 
kStatus_I3C_WriteFifoError – Write to M/SWDATAB register when FIFO full. 
kStatus_I3C_InvalidReq – Invalid use of request. 







status_t I3C_MasterReceive(I3C_Type *base, void *rxBuff, size_t rxSize, uint32_t flags)

Performs a polling receive transfer on the I2C/I3C bus. 

Parameters:

base – The I3C peripheral base address. 
rxBuff – The pointer to the data to be transferred. 
rxSize – The length in bytes of the data to be transferred. 
flags – Bit mask of options for the transfer. See enumeration _i3c_master_transfer_flags for available options. 


Return values:

kStatus_Success – Data was received successfully. 
kStatus_I3C_Busy – Another master is currently utilizing the bus. 
kStatus_I3C_Timeout – The module has stalled too long in a frame. 
kStatus_I3C_Term – The master terminates slave read. 
kStatus_I3C_HdrParityError – Parity error from DDR read. 
kStatus_I3C_CrcError – CRC error from DDR read. 
kStatus_I3C_MsgError – Message SDR/DDR mismatch or read/write message in wrong state. 
kStatus_I3C_ReadFifoError – Read from M/SRDATAB register when FIFO empty. 
kStatus_I3C_InvalidReq – Invalid use of request. 







status_t I3C_MasterStop(I3C_Type *base)

Sends a STOP signal on the I2C/I3C bus. 
This function does not return until the STOP signal is seen on the bus, or an error occurs.

Parameters:

base – The I3C peripheral base address. 


Return values:

kStatus_Success – The STOP signal was successfully sent on the bus and the transaction terminated. 
kStatus_I3C_Busy – Another master is currently utilizing the bus. 
kStatus_I3C_Timeout – The module has stalled too long in a frame. 
kStatus_I3C_InvalidReq – Invalid use of request. 







void I3C_MasterEmitRequest(I3C_Type *base, i3c_bus_request_t masterReq)

I3C master emit request. 

Parameters:

base – The I3C peripheral base address. 
masterReq – I3C master request of type i3c_bus_request_t







static inline void I3C_MasterEmitIBIResponse(I3C_Type *base, i3c_ibi_response_t ibiResponse)

I3C master emit request. 

Parameters:

base – The I3C peripheral base address. 
ibiResponse – I3C master emit IBI response of type i3c_ibi_response_t







void I3C_MasterRegisterIBI(I3C_Type *base, i3c_register_ibi_addr_t *ibiRule)

I3C master register IBI rule. 

Parameters:

base – The I3C peripheral base address. 
ibiRule – Pointer to ibi rule description of type i3c_register_ibi_addr_t







void I3C_MasterGetIBIRules(I3C_Type *base, i3c_register_ibi_addr_t *ibiRule)

I3C master get IBI rule. 

Parameters:

base – The I3C peripheral base address. 
ibiRule – Pointer to store the read out ibi rule description. 







i3c_ibi_type_t I3C_GetIBIType(I3C_Type *base)

I3C master get IBI Type. 

Parameters:

base – The I3C peripheral base address. 


Return values:
i3c_ibi_type_t – Type of i3c_ibi_type_t. 






static inline uint8_t I3C_GetIBIAddress(I3C_Type *base)

I3C master get IBI Address. 

Parameters:

base – The I3C peripheral base address. 


Return values:
The – 8-bit IBI address. 






status_t I3C_MasterProcessDAASpecifiedBaudrate(I3C_Type *base, uint8_t *addressList, uint32_t count, i3c_master_daa_baudrate_t *daaBaudRate)

Performs a DAA in the i3c bus with specified temporary baud rate. 

Parameters:

base – The I3C peripheral base address. 
addressList – The pointer for address list which is used to do DAA. 
count – The address count in the address list. 
daaBaudRate – The temporary baud rate in DAA process, NULL for using initial setting. The initial setting is set back between the completion of the DAA and the return of this function. 


Return values:

kStatus_Success – The transaction was started successfully. 
kStatus_I3C_Busy – Either another master is currently utilizing the bus, or a non-blocking transaction is already in progress. 
kStatus_I3C_SlaveCountExceed – The I3C slave count has exceed the definition in I3C_MAX_DEVCNT. 







static inline status_t I3C_MasterProcessDAA(I3C_Type *base, uint8_t *addressList, uint32_t count)

Performs a DAA in the i3c bus. 

Parameters:

base – The I3C peripheral base address. 
addressList – The pointer for address list which is used to do DAA. 
count – The address count in the address list. The initial setting is set back between the completion of the DAA and the return of this function. 


Return values:

kStatus_Success – The transaction was started successfully. 
kStatus_I3C_Busy – Either another master is currently utilizing the bus, or a non-blocking transaction is already in progress. 
kStatus_I3C_SlaveCountExceed – The I3C slave count has exceed the definition in I3C_MAX_DEVCNT. 







i3c_device_info_t *I3C_MasterGetDeviceListAfterDAA(I3C_Type *base, uint8_t *count)

Get device information list after DAA process is done. 

Parameters:

base – The I3C peripheral base address. 
count – [out] The pointer to store the available device count. 


Returns:
Pointer to the i3c_device_info_t array. 






void I3C_MasterClearDeviceCount(I3C_Type *base)

Clear the global device count which represents current devices number on the bus. When user resets all dynamic addresses on the bus, should call this API. 

Parameters:

base – The I3C peripheral base address. 







status_t I3C_MasterTransferBlocking(I3C_Type *base, i3c_master_transfer_t *transfer)

Performs a master polling transfer on the I2C/I3C bus. 

Note
The API does not return until the transfer succeeds or fails due to error happens during transfer.


Parameters:

base – The I3C peripheral base address. 
transfer – Pointer to the transfer structure. 


Return values:

kStatus_Success – Data was received successfully. 
kStatus_I3C_Busy – Another master is currently utilizing the bus. 
kStatus_I3C_IBIWon – The I3C slave event IBI or MR or HJ won the arbitration on a header address. 
kStatus_I3C_Timeout – The module has stalled too long in a frame. 
kStatus_I3C_Nak – The slave device sent a NAK in response to an address. 
kStatus_I3C_WriteAbort – The slave device sent a NAK in response to a write. 
kStatus_I3C_Term – The master terminates slave read. 
kStatus_I3C_HdrParityError – Parity error from DDR read. 
kStatus_I3C_CrcError – CRC error from DDR read. 
kStatus_I3C_MsgError – Message SDR/DDR mismatch or read/write message in wrong state. 
kStatus_I3C_ReadFifoError – Read from M/SRDATAB register when FIFO empty. 
kStatus_I3C_WriteFifoError – Write to M/SWDATAB register when FIFO full. 
kStatus_I3C_InvalidReq – Invalid use of request. 







status_t I3C_SlaveSend(I3C_Type *base, const void *txBuff, size_t txSize)

Performs a polling send transfer on the I3C bus. 

Parameters:

base – The I3C peripheral base address. 
txBuff – The pointer to the data to be transferred. 
txSize – The length in bytes of the data to be transferred. 


Returns:
Error or success status returned by API. 






status_t I3C_SlaveReceive(I3C_Type *base, void *rxBuff, size_t rxSize)

Performs a polling receive transfer on the I3C bus. 

Parameters:

base – The I3C peripheral base address. 
rxBuff – The pointer to the data to be transferred. 
rxSize – The length in bytes of the data to be transferred. 


Returns:
Error or success status returned by API. 






void I3C_MasterTransferCreateHandle(I3C_Type *base, i3c_master_handle_t *handle, const i3c_master_transfer_callback_t *callback, void *userData)

Creates a new handle for the I3C master non-blocking APIs. 
The creation of a handle is for use with the non-blocking APIs. Once a handle is created, there is not a corresponding destroy handle. If the user wants to terminate a transfer, the I3C_MasterTransferAbort() API shall be called.

Note
The function also enables the NVIC IRQ for the input I3C. Need to notice that on some SoCs the I3C IRQ is connected to INTMUX, in this case user needs to enable the associated INTMUX IRQ in application.


Parameters:

base – The I3C peripheral base address. 
handle – [out] Pointer to the I3C master driver handle. 
callback – User provided pointer to the asynchronous callback function. 
userData – User provided pointer to the application callback data. 







status_t I3C_MasterTransferNonBlocking(I3C_Type *base, i3c_master_handle_t *handle, i3c_master_transfer_t *transfer)

Performs a non-blocking transaction on the I2C/I3C bus. 

Parameters:

base – The I3C peripheral base address. 
handle – Pointer to the I3C master driver handle. 
transfer – The pointer to the transfer descriptor. 


Return values:

kStatus_Success – The transaction was started successfully. 
kStatus_I3C_Busy – Either another master is currently utilizing the bus, or a non-blocking transaction is already in progress. 







status_t I3C_MasterTransferGetCount(I3C_Type *base, i3c_master_handle_t *handle, size_t *count)

Returns number of bytes transferred so far. 

Parameters:

base – The I3C peripheral base address. 
handle – Pointer to the I3C master driver handle. 
count – [out] Number of bytes transferred so far by the non-blocking transaction. 


Return values:

kStatus_Success – 
kStatus_NoTransferInProgress – There is not a non-blocking transaction currently in progress. 







void I3C_MasterTransferAbort(I3C_Type *base, i3c_master_handle_t *handle)

Terminates a non-blocking I3C master transmission early. 

Note
It is not safe to call this function from an IRQ handler that has a higher priority than the I3C peripheral’s IRQ priority.


Parameters:

base – The I3C peripheral base address. 
handle – Pointer to the I3C master driver handle. 







void I3C_MasterTransferHandleIRQ(I3C_Type *base, void *intHandle)

Reusable routine to handle master interrupts. 

Note
This function does not need to be called unless you are reimplementing the nonblocking API’s interrupt handler routines to add special functionality. 


Parameters:

base – The I3C peripheral base address. 
intHandle – Pointer to the I3C master driver handle. 







enum _i3c_master_flags

I3C master peripheral flags. 
The following status register flags can be cleared:

kI3C_MasterSlaveStartFlag
kI3C_MasterControlDoneFlag
kI3C_MasterCompleteFlag
kI3C_MasterArbitrationWonFlag
kI3C_MasterSlave2MasterFlag


All flags except kI3C_MasterBetweenFlag and kI3C_MasterNackDetectFlag can be enabled as interrupts.

Note
These enums are meant to be OR’d together to form a bit mask. 

Values:


enumerator kI3C_MasterBetweenFlag

Between messages/DAAs flag 




enumerator kI3C_MasterNackDetectFlag

NACK detected flag 




enumerator kI3C_MasterSlaveStartFlag

Slave request start flag 




enumerator kI3C_MasterControlDoneFlag

Master request complete flag 




enumerator kI3C_MasterCompleteFlag

Transfer complete flag 




enumerator kI3C_MasterRxReadyFlag

Rx data ready in Rx buffer flag 




enumerator kI3C_MasterTxReadyFlag

Tx buffer ready for Tx data flag 




enumerator kI3C_MasterArbitrationWonFlag

Header address won arbitration flag 




enumerator kI3C_MasterErrorFlag

Error occurred flag 




enumerator kI3C_MasterSlave2MasterFlag

Switch from slave to master flag 




enumerator kI3C_MasterClearFlags







enum _i3c_master_error_flags

I3C master error flags to indicate the causes. 

Note
These enums are meant to be OR’d together to form a bit mask. 

Values:


enumerator kI3C_MasterErrorNackFlag

Slave NACKed the last address 




enumerator kI3C_MasterErrorWriteAbortFlag

Slave NACKed the write data 




enumerator kI3C_MasterErrorParityFlag

Parity error from DDR read 




enumerator kI3C_MasterErrorCrcFlag

CRC error from DDR read 




enumerator kI3C_MasterErrorReadFlag

Read from MRDATAB register when FIFO empty 




enumerator kI3C_MasterErrorWriteFlag

Write to MWDATAB register when FIFO full 




enumerator kI3C_MasterErrorMsgFlag

Message SDR/DDR mismatch or read/write message in wrong state 




enumerator kI3C_MasterErrorInvalidReqFlag

Invalid use of request 




enumerator kI3C_MasterErrorTimeoutFlag

The module has stalled too long in a frame 




enumerator kI3C_MasterAllErrorFlags

All error flags 






enum _i3c_master_state

I3C working master state. 
Values:


enumerator kI3C_MasterStateIdle

Bus stopped. 




enumerator kI3C_MasterStateSlvReq

Bus stopped but slave holding SDA low. 




enumerator kI3C_MasterStateMsgSdr

In SDR Message mode from using MWMSG_SDR. 




enumerator kI3C_MasterStateNormAct

In normal active SDR mode. 




enumerator kI3C_MasterStateDdr

In DDR Message mode. 




enumerator kI3C_MasterStateDaa

In ENTDAA mode. 




enumerator kI3C_MasterStateIbiAck

Waiting on IBI ACK/NACK decision. 




enumerator kI3C_MasterStateIbiRcv

Receiving IBI. 






enum _i3c_master_enable

I3C master enable configuration. 
Values:


enumerator kI3C_MasterOff

Master off. 




enumerator kI3C_MasterOn

Master on. 




enumerator kI3C_MasterCapable

Master capable. 






enum _i3c_master_hkeep

I3C high keeper configuration. 
Values:


enumerator kI3C_MasterHighKeeperNone

Use PUR to hold SCL high. 




enumerator kI3C_MasterHighKeeperWiredIn

Use pin_HK controls. 




enumerator kI3C_MasterPassiveSDA

Hi-Z for Bus Free and hold SDA. 




enumerator kI3C_MasterPassiveSDASCL

Hi-Z both for Bus Free, and can Hi-Z SDA for hold. 






enum _i3c_bus_request

Emits the requested operation when doing in pieces vs. by message. 
Values:


enumerator kI3C_RequestNone

No request. 




enumerator kI3C_RequestEmitStartAddr

Request to emit start and address on bus. 




enumerator kI3C_RequestEmitStop

Request to emit stop on bus. 




enumerator kI3C_RequestIbiAckNack

Manual IBI ACK or NACK. 




enumerator kI3C_RequestProcessDAA

Process DAA. 




enumerator kI3C_RequestForceExit

Request to force exit. 




enumerator kI3C_RequestAutoIbi

Hold in stopped state, but Auto-emit START,7E. 






enum _i3c_bus_type

Bus type with EmitStartAddr. 
Values:


enumerator kI3C_TypeI3CSdr

SDR mode of I3C. 




enumerator kI3C_TypeI2C

Standard i2c protocol. 




enumerator kI3C_TypeI3CDdr

HDR-DDR mode of I3C. 






enum _i3c_ibi_response

IBI response. 
Values:


enumerator kI3C_IbiRespAck

ACK with no mandatory byte. 




enumerator kI3C_IbiRespNack

NACK. 




enumerator kI3C_IbiRespAckMandatory

ACK with mandatory byte. 




enumerator kI3C_IbiRespManual

Reserved. 






enum _i3c_ibi_type

IBI type. 
Values:


enumerator kI3C_IbiNormal

In-band interrupt. 




enumerator kI3C_IbiHotJoin

slave hot join. 




enumerator kI3C_IbiMasterRequest

slave master ship request. 






enum _i3c_ibi_state

IBI state. 
Values:


enumerator kI3C_IbiReady

In-band interrupt ready state, ready for user to handle. 




enumerator kI3C_IbiDataBuffNeed

In-band interrupt need data buffer for data receive. 




enumerator kI3C_IbiAckNackPending

In-band interrupt Ack/Nack pending for decision. 






enum _i3c_direction

Direction of master and slave transfers. 
Values:


enumerator kI3C_Write

Master transmit. 




enumerator kI3C_Read

Master receive. 






enum _i3c_tx_trigger_level

Watermark of TX int/dma trigger level. 
Values:


enumerator kI3C_TxTriggerOnEmpty

Trigger on empty. 




enumerator kI3C_TxTriggerUntilOneQuarterOrLess

Trigger on 1/4 full or less. 




enumerator kI3C_TxTriggerUntilOneHalfOrLess

Trigger on 1/2 full or less. 




enumerator kI3C_TxTriggerUntilOneLessThanFull

Trigger on 1 less than full or less. 






enum _i3c_rx_trigger_level

Watermark of RX int/dma trigger level. 
Values:


enumerator kI3C_RxTriggerOnNotEmpty

Trigger on not empty. 




enumerator kI3C_RxTriggerUntilOneQuarterOrMore

Trigger on 1/4 full or more. 




enumerator kI3C_RxTriggerUntilOneHalfOrMore

Trigger on 1/2 full or more. 




enumerator kI3C_RxTriggerUntilThreeQuarterOrMore

Trigger on 3/4 full or more. 






enum _i3c_rx_term_ops

I3C master read termination operations. 
Values:


enumerator kI3C_RxTermDisable

Master doesn’t terminate read, used for CCC transfer. 




enumerator kI3C_RxAutoTerm

Master auto terminate read after receiving specified bytes(<=255). 




enumerator kI3C_RxTermLastByte

Master terminates read at any time after START, no length limitation. 






enum _i3c_start_scl_delay

I3C start SCL delay options. 
Values:


enumerator kI3C_NoDelay

No delay. 




enumerator kI3C_IncreaseSclHalfPeriod

Increases SCL clock period by 1/2. 




enumerator kI3C_IncreaseSclOnePeriod

Increases SCL clock period by 1. 




enumerator kI3C_IncreaseSclOneAndHalfPeriod

Increases SCL clock period by 1 1/2 






enum _i3c_master_transfer_flags

Transfer option flags. 

Note
These enumerations are intended to be OR’d together to form a bit mask of options for the _i3c_master_transfer::flags field. 

Values:


enumerator kI3C_TransferDefaultFlag

Transfer starts with a start signal, stops with a stop signal. 




enumerator kI3C_TransferNoStartFlag

Don’t send a start condition, address, and sub address 




enumerator kI3C_TransferRepeatedStartFlag

Send a repeated start condition 




enumerator kI3C_TransferNoStopFlag

Don’t send a stop condition. 




enumerator kI3C_TransferWordsFlag

Transfer in words, else transfer in bytes. 




enumerator kI3C_TransferDisableRxTermFlag

Disable Rx termination. Note: It’s for I3C CCC transfer. 




enumerator kI3C_TransferRxAutoTermFlag

Set Rx auto-termination. Note: It’s adaptive based on Rx size(<=255 bytes) except in I3C_MasterReceive. 




enumerator kI3C_TransferStartWithBroadcastAddr

Start transfer with 0x7E, then read/write data with device address. 






typedef enum _i3c_master_state i3c_master_state_t

I3C working master state. 




typedef enum _i3c_master_enable i3c_master_enable_t

I3C master enable configuration. 




typedef enum _i3c_master_hkeep i3c_master_hkeep_t

I3C high keeper configuration. 




typedef enum _i3c_bus_request i3c_bus_request_t

Emits the requested operation when doing in pieces vs. by message. 




typedef enum _i3c_bus_type i3c_bus_type_t

Bus type with EmitStartAddr. 




typedef enum _i3c_ibi_response i3c_ibi_response_t

IBI response. 




typedef enum _i3c_ibi_type i3c_ibi_type_t

IBI type. 




typedef enum _i3c_ibi_state i3c_ibi_state_t

IBI state. 




typedef enum _i3c_direction i3c_direction_t

Direction of master and slave transfers. 




typedef enum _i3c_tx_trigger_level i3c_tx_trigger_level_t

Watermark of TX int/dma trigger level. 




typedef enum _i3c_rx_trigger_level i3c_rx_trigger_level_t

Watermark of RX int/dma trigger level. 




typedef enum _i3c_rx_term_ops i3c_rx_term_ops_t

I3C master read termination operations. 




typedef enum _i3c_start_scl_delay i3c_start_scl_delay_t

I3C start SCL delay options. 




typedef struct _i3c_register_ibi_addr i3c_register_ibi_addr_t

Structure with setting master IBI rules and slave registry. 




typedef struct _i3c_baudrate i3c_baudrate_hz_t

Structure with I3C baudrate settings. 




typedef struct _i3c_master_daa_baudrate i3c_master_daa_baudrate_t

I3C DAA baud rate configuration. 




typedef struct _i3c_master_config i3c_master_config_t

Structure with settings to initialize the I3C master module. 
This structure holds configuration settings for the I3C peripheral. To initialize this structure to reasonable defaults, call the I3C_MasterGetDefaultConfig() function and pass a pointer to your configuration structure instance.
The configuration structure can be made constant so it resides in flash. 




typedef struct _i3c_master_transfer i3c_master_transfer_t





typedef struct _i3c_master_handle i3c_master_handle_t





typedef struct _i3c_master_transfer_callback i3c_master_transfer_callback_t

i3c master callback functions. 




typedef void (*i3c_master_isr_t)(I3C_Type *base, void *handle)

Typedef for master interrupt handler. 




struct _i3c_register_ibi_addr


#include <fsl_i3c.h>
Structure with setting master IBI rules and slave registry. 

Public Members


uint8_t address[5]

Address array for registry. 




bool i3cFastStart

Allow the START header to run as push-pull speed if all dynamic addresses take MSB 0. 




bool ibiHasPayload

Whether the address array has mandatory IBI byte. 







struct _i3c_baudrate


#include <fsl_i3c.h>
Structure with I3C baudrate settings. 

Public Members


uint32_t i2cBaud

Desired I2C baud rate in Hertz. 




uint32_t i3cPushPullBaud

Desired I3C push-pull baud rate in Hertz. 




uint32_t i3cOpenDrainBaud

Desired I3C open-drain baud rate in Hertz. 







struct _i3c_master_daa_baudrate


#include <fsl_i3c.h>
I3C DAA baud rate configuration. 

Public Members


uint32_t sourceClock_Hz

FCLK, function clock in Hertz. 




uint32_t i3cPushPullBaud

Desired I3C push-pull baud rate in Hertz. 




uint32_t i3cOpenDrainBaud

Desired I3C open-drain baud rate in Hertz. 







struct _i3c_master_config


#include <fsl_i3c.h>
Structure with settings to initialize the I3C master module. 
This structure holds configuration settings for the I3C peripheral. To initialize this structure to reasonable defaults, call the I3C_MasterGetDefaultConfig() function and pass a pointer to your configuration structure instance.
The configuration structure can be made constant so it resides in flash. 

Public Members


i3c_master_enable_t enableMaster

Enable master mode. 




bool disableTimeout

Whether to disable timeout to prevent the ERRWARN. 




i3c_master_hkeep_t hKeep

High keeper mode setting. 




bool enableOpenDrainStop

Whether to emit open-drain speed STOP. 




bool enableOpenDrainHigh

Enable Open-Drain High to be 1 PPBAUD count for i3c messages, or 1 ODBAUD. 




i3c_baudrate_hz_t baudRate_Hz

Desired baud rate settings. 




i3c_start_scl_delay_t startSclDelay

I3C SCL delay after START. 




i3c_start_scl_delay_t restartSclDelay

I3C SCL delay after Repeated START. 







struct _i3c_master_transfer_callback


#include <fsl_i3c.h>
i3c master callback functions. 

Public Members


void (*slave2Master)(I3C_Type *base, void *userData)

Transfer complete callback 




void (*ibiCallback)(I3C_Type *base, i3c_master_handle_t *handle, i3c_ibi_type_t ibiType, i3c_ibi_state_t ibiState)

IBI event callback 




void (*transferComplete)(I3C_Type *base, i3c_master_handle_t *handle, status_t completionStatus, void *userData)

Transfer complete callback 







struct _i3c_master_transfer


#include <fsl_i3c.h>
Non-blocking transfer descriptor structure. 
This structure is used to pass transaction parameters to the I3C_MasterTransferNonBlocking() API. 

Public Members


uint32_t flags

Bit mask of options for the transfer. See enumeration _i3c_master_transfer_flags for available options. Set to 0 or kI3C_TransferDefaultFlag for normal transfers. 




uint8_t slaveAddress

The 7-bit slave address. 




i3c_direction_t direction

Either kI3C_Read or kI3C_Write. 




uint32_t subaddress

Sub address. Transferred MSB first. 




size_t subaddressSize

Length of sub address to send in bytes. Maximum size is 4 bytes. 




void *data

Pointer to data to transfer. 




size_t dataSize

Number of bytes to transfer. 




i3c_bus_type_t busType

bus type. 




i3c_ibi_response_t ibiResponse

ibi response during transfer. 







struct _i3c_master_handle


#include <fsl_i3c.h>
Driver handle for master non-blocking APIs. 

Note
The contents of this structure are private and subject to change. 


Public Members


uint8_t state

Transfer state machine current state. 




uint32_t remainingBytes

Remaining byte count in current state. 




i3c_rx_term_ops_t rxTermOps

Read termination operation. 




i3c_master_transfer_t transfer

Copy of the current transfer info. 




uint8_t ibiAddress

Slave address which request IBI. 




uint8_t *ibiBuff

Pointer to IBI buffer to keep ibi bytes. 




size_t ibiPayloadSize

IBI payload size. 




i3c_ibi_type_t ibiType

IBI type. 




i3c_master_transfer_callback_t callback

Callback functions pointer. 




void *userData

Application data passed to callback. 







I3C Master DMA Driver#


void I3C_MasterTransferCreateHandleEDMA(I3C_Type *base, i3c_master_edma_handle_t *handle, const i3c_master_edma_callback_t *callback, void *userData, edma_handle_t *rxDmaHandle, edma_handle_t *txDmaHandle)

Create a new handle for the I3C master DMA APIs. 
The creation of a handle is for use with the DMA APIs. Once a handle is created, there is not a corresponding destroy handle. If the user wants to terminate a transfer, the I3C_MasterTransferAbortDMA() API shall be called.
For devices where the I3C send and receive DMA requests are OR’d together, the txDmaHandle parameter is ignored and may be set to NULL.

Parameters:

base – The I3C peripheral base address. 
handle – Pointer to the I3C master driver handle. 
callback – User provided pointer to the asynchronous callback function. 
userData – User provided pointer to the application callback data. 
rxDmaHandle – Handle for the DMA receive channel. Created by the user prior to calling this function. 
txDmaHandle – Handle for the DMA transmit channel. Created by the user prior to calling this function. 







status_t I3C_MasterTransferEDMA(I3C_Type *base, i3c_master_edma_handle_t *handle, i3c_master_transfer_t *transfer)

Performs a non-blocking DMA-based transaction on the I3C bus. 
The callback specified when the handle was created is invoked when the transaction has completed.

Parameters:

base – The I3C peripheral base address. 
handle – Pointer to the I3C master driver handle. 
transfer – The pointer to the transfer descriptor. 


Return values:

kStatus_Success – The transaction was started successfully. 
kStatus_I3C_Busy – Either another master is currently utilizing the bus, or another DMA transaction is already in progress. 







status_t I3C_MasterTransferGetCountEDMA(I3C_Type *base, i3c_master_edma_handle_t *handle, size_t *count)

Returns number of bytes transferred so far. 

Parameters:

base – The I3C peripheral base address. 
handle – Pointer to the I3C master driver handle. 
count – [out] Number of bytes transferred so far by the non-blocking transaction. 


Return values:

kStatus_Success – 
kStatus_NoTransferInProgress – There is not a DMA transaction currently in progress. 







void I3C_MasterTransferAbortEDMA(I3C_Type *base, i3c_master_edma_handle_t *handle)

Terminates a non-blocking I3C master transmission early. 

Note
It is not safe to call this function from an IRQ handler that has a higher priority than the DMA peripheral’s IRQ priority.


Parameters:

base – The I3C peripheral base address. 
handle – Pointer to the I3C master driver handle. 







void I3C_MasterTransferEDMAHandleIRQ(I3C_Type *base, void *i3cHandle)

Reusable routine to handle master interrupts. 

Note
This function does not need to be called unless you are reimplementing the nonblocking API’s interrupt handler routines to add special functionality. 


Parameters:

base – The I3C peripheral base address. 
i3cHandle – Pointer to the I3C master DMA driver handle. 







typedef struct _i3c_master_edma_handle i3c_master_edma_handle_t





typedef struct _i3c_master_edma_callback i3c_master_edma_callback_t

i3c master callback functions. 




struct _i3c_master_edma_callback


#include <fsl_i3c_edma.h>
i3c master callback functions. 

Public Members


void (*slave2Master)(I3C_Type *base, void *userData)

Target asks for controller request. 




void (*ibiCallback)(I3C_Type *base, i3c_master_edma_handle_t *handle, i3c_ibi_type_t ibiType, i3c_ibi_state_t ibiState)

IBI event callback. 




void (*transferComplete)(I3C_Type *base, i3c_master_edma_handle_t *handle, status_t status, void *userData)

Transfer complete callback. 







struct _i3c_master_edma_handle


#include <fsl_i3c_edma.h>
Driver handle for master EDMA APIs. 

Note
The contents of this structure are private and subject to change. 


Public Members


I3C_Type *base

I3C base pointer. 




uint8_t state

Transfer state machine current state. 




uint32_t transferCount

Indicates progress of the transfer 




uint8_t subaddressBuffer[4]

Saving subaddress command. 




uint8_t subaddressCount

Saving command count. 




i3c_master_transfer_t transfer

Copy of the current transfer info. 




i3c_master_edma_callback_t callback

Callback function pointer. 




void *userData

Application data passed to callback. 




edma_handle_t *rxDmaHandle

Handle for receive DMA channel. 




edma_handle_t *txDmaHandle

Handle for transmit DMA channel. 




bool ibiFlag

IBIWON flag. 




uint8_t ibiAddress

Slave address which request IBI. 




uint8_t *ibiBuff

Pointer to IBI buffer to keep ibi bytes. 




size_t ibiPayloadSize

IBI payload size. 




i3c_ibi_type_t ibiType

IBI type. 




status_t result

Transfer result. 







I3C Slave Driver#


void I3C_SlaveGetDefaultConfig(i3c_slave_config_t *slaveConfig)

Provides a default configuration for the I3C slave peripheral. 
This function provides the following default configuration for the I3C slave peripheral: 
slaveConfig->enableslave             = true;



After calling this function, you can override any settings in order to customize the configuration, prior to initializing the slave driver with I3C_SlaveInit().

Parameters:

slaveConfig – [out] User provided configuration structure for default values. Refer to i3c_slave_config_t. 







void I3C_SlaveInit(I3C_Type *base, const i3c_slave_config_t *slaveConfig, uint32_t slowClock_Hz)

Initializes the I3C slave peripheral. 
This function enables the peripheral clock and initializes the I3C slave peripheral as described by the user provided configuration.

Parameters:

base – The I3C peripheral base address. 
slaveConfig – User provided peripheral configuration. Use I3C_SlaveGetDefaultConfig() to get a set of defaults that you can override. 
slowClock_Hz – Frequency in Hertz of the I3C slow clock. Used to calculate the bus match condition values. If FSL_FEATURE_I3C_HAS_NO_SCONFIG_BAMATCH defines as 1, this parameter is useless. 







void I3C_SlaveDeinit(I3C_Type *base)

Deinitializes the I3C slave peripheral. 
This function disables the I3C slave peripheral and gates the clock.

Parameters:

base – The I3C peripheral base address. 







static inline void I3C_SlaveEnable(I3C_Type *base, bool isEnable)

Enable/Disable Slave. 

Parameters:

base – The I3C peripheral base address. 
isEnable – Enable or disable. 







static inline uint32_t I3C_SlaveGetStatusFlags(I3C_Type *base)

Gets the I3C slave status flags. 
A bit mask with the state of all I3C slave status flags is returned. For each flag, the corresponding bit in the return value is set if the flag is asserted.

See also
_i3c_slave_flags



Parameters:

base – The I3C peripheral base address. 


Returns:
State of the status flags:

1: related status flag is set.
0: related status flag is not set. 








static inline void I3C_SlaveClearStatusFlags(I3C_Type *base, uint32_t statusMask)

Clears the I3C slave status flag state. 
The following status register flags can be cleared:

kI3C_SlaveBusStartFlag
kI3C_SlaveMatchedFlag
kI3C_SlaveBusStopFlag


Attempts to clear other flags has no effect.

See also
_i3c_slave_flags. 



Parameters:

base – The I3C peripheral base address. 
statusMask – A bitmask of status flags that are to be cleared. The mask is composed of _i3c_slave_flags enumerators OR’d together. You may pass the result of a previous call to I3C_SlaveGetStatusFlags(). 







static inline uint32_t I3C_SlaveGetErrorStatusFlags(I3C_Type *base)

Gets the I3C slave error status flags. 
A bit mask with the state of all I3C slave error status flags is returned. For each flag, the corresponding bit in the return value is set if the flag is asserted.

See also
_i3c_slave_error_flags



Parameters:

base – The I3C peripheral base address. 


Returns:
State of the error status flags:

1: related status flag is set.
0: related status flag is not set. 








static inline void I3C_SlaveClearErrorStatusFlags(I3C_Type *base, uint32_t statusMask)

Clears the I3C slave error status flag state. 

See also
_i3c_slave_error_flags. 



Parameters:

base – The I3C peripheral base address. 
statusMask – A bitmask of error status flags that are to be cleared. The mask is composed of _i3c_slave_error_flags enumerators OR’d together. You may pass the result of a previous call to I3C_SlaveGetErrorStatusFlags(). 







i3c_slave_activity_state_t I3C_SlaveGetActivityState(I3C_Type *base)

Gets the I3C slave state. 

Parameters:

base – The I3C peripheral base address. 


Returns:
I3C slave activity state, refer i3c_slave_activity_state_t. 






status_t I3C_SlaveCheckAndClearError(I3C_Type *base, uint32_t status)





static inline void I3C_SlaveEnableInterrupts(I3C_Type *base, uint32_t interruptMask)

Enables the I3C slave interrupt requests. 
Only below flags can be enabled as interrupts.

kI3C_SlaveBusStartFlag
kI3C_SlaveMatchedFlag
kI3C_SlaveBusStopFlag
kI3C_SlaveRxReadyFlag
kI3C_SlaveTxReadyFlag
kI3C_SlaveDynamicAddrChangedFlag
kI3C_SlaveReceivedCCCFlag
kI3C_SlaveErrorFlag
kI3C_SlaveHDRCommandMatchFlag
kI3C_SlaveCCCHandledFlag
kI3C_SlaveEventSentFlag



Parameters:

base – The I3C peripheral base address. 
interruptMask – Bit mask of interrupts to enable. See _i3c_slave_flags for the set of constants that should be OR’d together to form the bit mask. 







static inline void I3C_SlaveDisableInterrupts(I3C_Type *base, uint32_t interruptMask)

Disables the I3C slave interrupt requests. 
Only below flags can be disabled as interrupts.

kI3C_SlaveBusStartFlag
kI3C_SlaveMatchedFlag
kI3C_SlaveBusStopFlag
kI3C_SlaveRxReadyFlag
kI3C_SlaveTxReadyFlag
kI3C_SlaveDynamicAddrChangedFlag
kI3C_SlaveReceivedCCCFlag
kI3C_SlaveErrorFlag
kI3C_SlaveHDRCommandMatchFlag
kI3C_SlaveCCCHandledFlag
kI3C_SlaveEventSentFlag



Parameters:

base – The I3C peripheral base address. 
interruptMask – Bit mask of interrupts to disable. See _i3c_slave_flags for the set of constants that should be OR’d together to form the bit mask. 







static inline uint32_t I3C_SlaveGetEnabledInterrupts(I3C_Type *base)

Returns the set of currently enabled I3C slave interrupt requests. 

Parameters:

base – The I3C peripheral base address. 


Returns:
A bitmask composed of _i3c_slave_flags enumerators OR’d together to indicate the set of enabled interrupts. 






static inline uint32_t I3C_SlaveGetPendingInterrupts(I3C_Type *base)

Returns the set of pending I3C slave interrupt requests. 

Parameters:

base – The I3C peripheral base address. 


Returns:
A bitmask composed of _i3c_slave_flags enumerators OR’d together to indicate the set of pending interrupts. 






static inline void I3C_SlaveEnableDMA(I3C_Type *base, bool enableTx, bool enableRx, uint32_t width)

Enables or disables I3C slave DMA requests. 

Parameters:

base – The I3C peripheral base address. 
enableTx – Enable flag for transmit DMA request. Pass true for enable, false for disable. 
enableRx – Enable flag for receive DMA request. Pass true for enable, false for disable. 
width – DMA read/write unit in bytes. 







static inline uint32_t I3C_SlaveGetTxFifoAddress(I3C_Type *base, uint32_t width)

Gets I3C slave transmit data register address for DMA transfer. 

Parameters:

base – The I3C peripheral base address. 
width – DMA read/write unit in bytes. 


Returns:
The I3C Slave Transmit Data Register address. 






static inline uint32_t I3C_SlaveGetRxFifoAddress(I3C_Type *base, uint32_t width)

Gets I3C slave receive data register address for DMA transfer. 

Parameters:

base – The I3C peripheral base address. 
width – DMA read/write unit in bytes. 


Returns:
The I3C Slave Receive Data Register address. 






static inline void I3C_SlaveSetWatermarks(I3C_Type *base, i3c_tx_trigger_level_t txLvl, i3c_rx_trigger_level_t rxLvl, bool flushTx, bool flushRx)

Sets the watermarks for I3C slave FIFOs. 

Parameters:

base – The I3C peripheral base address. 
txLvl – Transmit FIFO watermark level. The kI3C_SlaveTxReadyFlag flag is set whenever the number of words in the transmit FIFO reaches txLvl. 
rxLvl – Receive FIFO watermark level. The kI3C_SlaveRxReadyFlag flag is set whenever the number of words in the receive FIFO reaches rxLvl. 
flushTx – true if TX FIFO is to be cleared, otherwise TX FIFO remains unchanged. 
flushRx – true if RX FIFO is to be cleared, otherwise RX FIFO remains unchanged. 







static inline void I3C_SlaveGetFifoCounts(I3C_Type *base, size_t *rxCount, size_t *txCount)

Gets the current number of bytes in the I3C slave FIFOs. 

Parameters:

base – The I3C peripheral base address. 
txCount – [out] Pointer through which the current number of bytes in the transmit FIFO is returned. Pass NULL if this value is not required. 
rxCount – [out] Pointer through which the current number of bytes in the receive FIFO is returned. Pass NULL if this value is not required. 







status_t I3C_SlaveSend(I3C_Type *base, const void *txBuff, size_t txSize)

Performs a polling send transfer on the I3C bus. 

Parameters:

base – The I3C peripheral base address. 
txBuff – The pointer to the data to be transferred. 
txSize – The length in bytes of the data to be transferred. 


Returns:
Error or success status returned by API. 






status_t I3C_SlaveReceive(I3C_Type *base, void *rxBuff, size_t rxSize)

Performs a polling receive transfer on the I3C bus. 

Parameters:

base – The I3C peripheral base address. 
rxBuff – The pointer to the data to be transferred. 
rxSize – The length in bytes of the data to be transferred. 


Returns:
Error or success status returned by API. 






void I3C_SlaveTransferCreateHandle(I3C_Type *base, i3c_slave_handle_t *handle, i3c_slave_transfer_callback_t callback, void *userData)

Creates a new handle for the I3C slave non-blocking APIs. 
The creation of a handle is for use with the non-blocking APIs. Once a handle is created, there is not a corresponding destroy handle. If the user wants to terminate a transfer, the I3C_SlaveTransferAbort() API shall be called.

Note
The function also enables the NVIC IRQ for the input I3C. Need to notice that on some SoCs the I3C IRQ is connected to INTMUX, in this case user needs to enable the associated INTMUX IRQ in application.


Parameters:

base – The I3C peripheral base address. 
handle – [out] Pointer to the I3C slave driver handle. 
callback – User provided pointer to the asynchronous callback function. 
userData – User provided pointer to the application callback data. 







status_t I3C_SlaveTransferNonBlocking(I3C_Type *base, i3c_slave_handle_t *handle, uint32_t eventMask)

Starts accepting slave transfers. 
Call this API after calling I2C_SlaveInit() and I3C_SlaveTransferCreateHandle() to start processing transactions driven by an I2C master. The slave monitors the I2C bus and pass events to the callback that was passed into the call to I3C_SlaveTransferCreateHandle(). The callback is always invoked from the interrupt context.
The set of events received by the callback is customizable. To do so, set the eventMask parameter to the OR’d combination of i3c_slave_transfer_event_t enumerators for the events you wish to receive. The kI3C_SlaveTransmitEvent and kI3C_SlaveReceiveEvent events are always enabled and do not need to be included in the mask. Alternatively, you can pass 0 to get a default set of only the transmit and receive events that are always enabled. In addition, the kI3C_SlaveAllEvents constant is provided as a convenient way to enable all events.

Parameters:

base – The I3C peripheral base address. 
handle – Pointer to struct: _i3c_slave_handle structure which stores the transfer state. 
eventMask – Bit mask formed by OR’ing together i3c_slave_transfer_event_t enumerators to specify which events to send to the callback. Other accepted values are 0 to get a default set of only the transmit and receive events, and kI3C_SlaveAllEvents to enable all events.


Return values:

kStatus_Success – Slave transfers were successfully started. 
kStatus_I3C_Busy – Slave transfers have already been started on this handle. 







status_t I3C_SlaveTransferGetCount(I3C_Type *base, i3c_slave_handle_t *handle, size_t *count)

Gets the slave transfer status during a non-blocking transfer. 

Parameters:

base – The I3C peripheral base address. 
handle – Pointer to i2c_slave_handle_t structure. 
count – [out] Pointer to a value to hold the number of bytes transferred. May be NULL if the count is not required. 


Return values:

kStatus_Success – 
kStatus_NoTransferInProgress – 







void I3C_SlaveTransferAbort(I3C_Type *base, i3c_slave_handle_t *handle)

Aborts the slave non-blocking transfers. 

Note
This API could be called at any time to stop slave for handling the bus events. 


Parameters:

base – The I3C peripheral base address. 
handle – Pointer to struct: _i3c_slave_handle structure which stores the transfer state. 







void I3C_SlaveTransferHandleIRQ(I3C_Type *base, void *intHandle)

Reusable routine to handle slave interrupts. 

Note
This function does not need to be called unless you are reimplementing the non blocking API’s interrupt handler routines to add special functionality. 


Parameters:

base – The I3C peripheral base address. 
intHandle – Pointer to struct: _i3c_slave_handle structure which stores the transfer state. 







enum _i3c_slave_flags

I3C slave peripheral flags. 
The following status register flags can be cleared:

kI3C_SlaveBusStartFlag
kI3C_SlaveMatchedFlag
kI3C_SlaveBusStopFlag


Only below flags can be enabled as interrupts.

kI3C_SlaveBusStartFlag
kI3C_SlaveMatchedFlag
kI3C_SlaveBusStopFlag
kI3C_SlaveRxReadyFlag
kI3C_SlaveTxReadyFlag
kI3C_SlaveDynamicAddrChangedFlag
kI3C_SlaveReceivedCCCFlag
kI3C_SlaveErrorFlag
kI3C_SlaveHDRCommandMatchFlag
kI3C_SlaveCCCHandledFlag
kI3C_SlaveEventSentFlag



Note
These enums are meant to be OR’d together to form a bit mask. 

Values:


enumerator kI3C_SlaveNotStopFlag

Slave status not stop flag 




enumerator kI3C_SlaveMessageFlag

Slave status message, indicating slave is listening to the bus traffic or responding 




enumerator kI3C_SlaveRequiredReadFlag

Slave status required, either is master doing SDR read from slave, or is IBI pushing out. 




enumerator kI3C_SlaveRequiredWriteFlag

Slave status request write, master is doing SDR write to slave, except slave in ENTDAA mode 




enumerator kI3C_SlaveBusDAAFlag

I3C bus is in ENTDAA mode 




enumerator kI3C_SlaveBusHDRModeFlag

I3C bus is in HDR mode 




enumerator kI3C_SlaveBusStartFlag

Start/Re-start event is seen since the bus was last cleared 




enumerator kI3C_SlaveMatchedFlag

Slave address(dynamic/static) matched since last cleared 




enumerator kI3C_SlaveBusStopFlag

Stop event is seen since the bus was last cleared 




enumerator kI3C_SlaveRxReadyFlag

Rx data ready in rx buffer flag 




enumerator kI3C_SlaveTxReadyFlag

Tx buffer ready for Tx data flag 




enumerator kI3C_SlaveDynamicAddrChangedFlag

Slave dynamic address has been assigned, re-assigned, or lost 




enumerator kI3C_SlaveReceivedCCCFlag

Slave received Common command code 




enumerator kI3C_SlaveErrorFlag

Error occurred flag 




enumerator kI3C_SlaveHDRCommandMatchFlag

High data rate command match 




enumerator kI3C_SlaveCCCHandledFlag

Slave received Common command code is handled by I3C module 




enumerator kI3C_SlaveEventSentFlag

Slave IBI/P2P/MR/HJ event has been sent 




enumerator kI3C_SlaveIbiDisableFlag

Slave in band interrupt is disabled. 




enumerator kI3C_SlaveMasterRequestDisabledFlag

Slave master request is disabled. 




enumerator kI3C_SlaveHotJoinDisabledFlag

Slave Hot-Join is disabled. 




enumerator kI3C_SlaveClearFlags

All flags which are cleared by the driver upon starting a transfer. 




enumerator kI3C_SlaveAllIrqFlags







enum _i3c_slave_error_flags

I3C slave error flags to indicate the causes. 

Note
These enums are meant to be OR’d together to form a bit mask. 

Values:


enumerator kI3C_SlaveErrorOverrunFlag

Slave internal from-bus buffer/FIFO overrun. 




enumerator kI3C_SlaveErrorUnderrunFlag

Slave internal to-bus buffer/FIFO underrun 




enumerator kI3C_SlaveErrorUnderrunNakFlag

Slave internal from-bus buffer/FIFO underrun and NACK error 




enumerator kI3C_SlaveErrorTermFlag

Terminate error from master 




enumerator kI3C_SlaveErrorInvalidStartFlag

Slave invalid start flag 




enumerator kI3C_SlaveErrorSdrParityFlag

SDR parity error 




enumerator kI3C_SlaveErrorHdrParityFlag

HDR parity error 




enumerator kI3C_SlaveErrorHdrCRCFlag

HDR-DDR CRC error 




enumerator kI3C_SlaveErrorS0S1Flag

S0 or S1 error 




enumerator kI3C_SlaveErrorOverreadFlag

Over-read error 




enumerator kI3C_SlaveErrorOverwriteFlag

Over-write error 






enum _i3c_slave_event

I3C slave.event. 
Values:


enumerator kI3C_SlaveEventNormal

Normal mode. 




enumerator kI3C_SlaveEventIBI

In band interrupt event. 




enumerator kI3C_SlaveEventMasterReq

Master request event. 




enumerator kI3C_SlaveEventHotJoinReq

Hot-join event. 






enum _i3c_slave_activity_state

I3C slave.activity state. 
Values:


enumerator kI3C_SlaveNoLatency

Normal bus operation 




enumerator kI3C_SlaveLatency1Ms

1ms of latency. 




enumerator kI3C_SlaveLatency100Ms

100ms of latency. 




enumerator kI3C_SlaveLatency10S

10s latency. 






enum _i3c_slave_transfer_event

Set of events sent to the callback for non blocking slave transfers. 
These event enumerations are used for two related purposes. First, a bit mask created by OR’ing together events is passed to I3C_SlaveTransferNonBlocking() in order to specify which events to enable. Then, when the slave callback is invoked, it is passed the current event through its transfer parameter.

Note
These enumerations are meant to be OR’d together to form a bit mask of events. 

Values:


enumerator kI3C_SlaveAddressMatchEvent

Received the slave address after a start or repeated start. 




enumerator kI3C_SlaveTransmitEvent

Callback is requested to provide data to transmit (slave-transmitter role). 




enumerator kI3C_SlaveReceiveEvent

Callback is requested to provide a buffer in which to place received data (slave-receiver role). 




enumerator kI3C_SlaveRequiredTransmitEvent

Callback is requested to provide a buffer in which to place received data (slave-receiver role). 




enumerator kI3C_SlaveStartEvent

A start/repeated start was detected. 




enumerator kI3C_SlaveHDRCommandMatchEvent

Slave Match HDR Command. 




enumerator kI3C_SlaveCompletionEvent

A stop was detected, completing the transfer. 




enumerator kI3C_SlaveRequestSentEvent

Slave request event sent. 




enumerator kI3C_SlaveReceivedCCCEvent

Slave received CCC event, need to handle by application. 




enumerator kI3C_SlaveAllEvents

Bit mask of all available events. 






typedef enum _i3c_slave_event i3c_slave_event_t

I3C slave.event. 




typedef enum _i3c_slave_activity_state i3c_slave_activity_state_t

I3C slave.activity state. 




typedef struct _i3c_slave_config i3c_slave_config_t

Structure with settings to initialize the I3C slave module. 
This structure holds configuration settings for the I3C peripheral. To initialize this structure to reasonable defaults, call the I3C_SlaveGetDefaultConfig() function and pass a pointer to your configuration structure instance.
The configuration structure can be made constant so it resides in flash. 




typedef enum _i3c_slave_transfer_event i3c_slave_transfer_event_t

Set of events sent to the callback for non blocking slave transfers. 
These event enumerations are used for two related purposes. First, a bit mask created by OR’ing together events is passed to I3C_SlaveTransferNonBlocking() in order to specify which events to enable. Then, when the slave callback is invoked, it is passed the current event through its transfer parameter.

Note
These enumerations are meant to be OR’d together to form a bit mask of events. 





typedef struct _i3c_slave_transfer i3c_slave_transfer_t

I3C slave transfer structure. 




typedef struct _i3c_slave_handle i3c_slave_handle_t





typedef void (*i3c_slave_transfer_callback_t)(I3C_Type *base, i3c_slave_transfer_t *transfer, void *userData)

Slave event callback function pointer type. 
This callback is used only for the slave non-blocking transfer API. To install a callback, use the I3C_SlaveSetCallback() function after you have created a handle.

Param base:
Base address for the I3C instance on which the event occurred. 

Param transfer:
Pointer to transfer descriptor containing values passed to and/or from the callback. 

Param userData:
Arbitrary pointer-sized value passed from the application. 






typedef void (*i3c_slave_isr_t)(I3C_Type *base, void *handle)

Typedef for slave interrupt handler. 




struct _i3c_slave_config


#include <fsl_i3c.h>
Structure with settings to initialize the I3C slave module. 
This structure holds configuration settings for the I3C peripheral. To initialize this structure to reasonable defaults, call the I3C_SlaveGetDefaultConfig() function and pass a pointer to your configuration structure instance.
The configuration structure can be made constant so it resides in flash. 

Public Members


bool enableSlave

Whether to enable slave. 




uint8_t staticAddr

Static address. 




uint16_t vendorID

Device vendor ID(manufacture ID). 




uint32_t partNumber

Device part number info 




uint8_t dcr

Device characteristics register information. 




uint8_t bcr

Bus characteristics register information. 




uint8_t hdrMode

Support hdr mode, could be OR logic in enumeration:i3c_hdr_mode_t. 




bool nakAllRequest

Whether to reply NAK to all requests except broadcast CCC. 




bool ignoreS0S1Error

Whether to ignore S0/S1 error in SDR mode. 




bool offline

Whether to wait 60 us of bus quiet or HDR request to ensure slave track SDR mode safely. 




bool matchSlaveStartStop

Whether to assert start/stop status only the time slave is addressed. 




uint32_t maxWriteLength

Maximum write length. 




uint32_t maxReadLength

Maximum read length. 







struct _i3c_slave_transfer


#include <fsl_i3c.h>
I3C slave transfer structure. 

Public Members


uint32_t event

Reason the callback is being invoked. 




uint8_t *txData

Transfer buffer 




size_t txDataSize

Transfer size 




uint8_t *rxData

Transfer buffer 




size_t rxDataSize

Transfer size 




status_t completionStatus

Success or error code describing how the transfer completed. Only applies for kI3C_SlaveCompletionEvent. 




size_t transferredCount

Number of bytes actually transferred since start or last repeated start. 







struct _i3c_slave_handle


#include <fsl_i3c.h>
I3C slave handle structure. 

Note
The contents of this structure are private and subject to change. 


Public Members


i3c_slave_transfer_t transfer

I3C slave transfer copy. 




bool isBusy

Whether transfer is busy. 




bool wasTransmit

Whether the last transfer was a transmit. 




uint32_t eventMask

Mask of enabled events. 




uint32_t transferredCount

Count of bytes transferred. 




i3c_slave_transfer_callback_t callback

Callback function called at transfer event. 




void *userData

Callback parameter passed to callback. 




size_t txFifoSize

Tx Fifo size 







I3C Slave DMA Driver#


void I3C_SlaveTransferCreateHandleEDMA(I3C_Type *base, i3c_slave_edma_handle_t *handle, i3c_slave_edma_callback_t callback, void *userData, edma_handle_t *rxDmaHandle, edma_handle_t *txDmaHandle)

Create a new handle for the I3C slave DMA APIs. 
The creation of a handle is for use with the DMA APIs. Once a handle is created, there is not a corresponding destroy handle. If the user wants to terminate a transfer, the I3C_SlaveTransferAbortDMA() API shall be called.
For devices where the I3C send and receive DMA requests are OR’d together, the txDmaHandle parameter is ignored and may be set to NULL.

Parameters:

base – The I3C peripheral base address. 
handle – Pointer to the I3C slave driver handle. 
callback – User provided pointer to the asynchronous callback function. 
userData – User provided pointer to the application callback data. 
rxDmaHandle – Handle for the DMA receive channel. Created by the user prior to calling this function. 
txDmaHandle – Handle for the DMA transmit channel. Created by the user prior to calling this function. 







status_t I3C_SlaveTransferEDMA(I3C_Type *base, i3c_slave_edma_handle_t *handle, i3c_slave_edma_transfer_t *transfer, uint32_t eventMask)

Prepares for a non-blocking DMA-based transaction on the I3C bus. 
The API will do DMA configuration according to the input transfer descriptor, and the data will be transferred when there’s bus master requesting transfer from/to this slave. So the timing of call to this API need be aligned with master application to ensure the transfer is executed as expected. Callback specified when the handle was created is invoked when the transaction has completed.

Parameters:

base – The I3C peripheral base address. 
handle – Pointer to the I3C slave driver handle. 
transfer – The pointer to the transfer descriptor. 
eventMask – Bit mask formed by OR’ing together i3c_slave_transfer_event_t enumerators to specify which events to send to the callback. The transmit and receive events is not allowed to be enabled. 


Return values:

kStatus_Success – The transaction was started successfully. 
kStatus_I3C_Busy – Either another master is currently utilizing the bus, or another DMA transaction is already in progress. 
kStatus_Fail – The transaction can’t be set. 







void I3C_SlaveTransferAbortEDMA(I3C_Type *base, i3c_slave_edma_handle_t *handle)

Abort a slave edma non-blocking transfer in a early time. 

Parameters:

base – I3C peripheral base address 
handle – pointer to i3c_slave_edma_handle_t structure 







void I3C_SlaveTransferEDMAHandleIRQ(I3C_Type *base, void *i3cHandle)

Reusable routine to handle slave interrupts. 

Note
This function does not need to be called unless you are reimplementing the nonblocking API’s interrupt handler routines to add special functionality. 


Parameters:

base – The I3C peripheral base address. 
i3cHandle – Pointer to the I3C slave DMA driver handle. 







typedef struct _i3c_slave_edma_handle i3c_slave_edma_handle_t





typedef struct _i3c_slave_edma_transfer i3c_slave_edma_transfer_t

I3C slave transfer structure. 




typedef void (*i3c_slave_edma_callback_t)(I3C_Type *base, i3c_slave_edma_transfer_t *transfer, void *userData)

Slave event callback function pointer type. 
This callback is used only for the slave DMA transfer API.

Param base:
Base address for the I3C instance on which the event occurred. 

Param handle:
Pointer to slave DMA transfer handle. 

Param transfer:
Pointer to transfer descriptor containing values passed to and/or from the callback. 

Param userData:
Arbitrary pointer-sized value passed from the application. 






struct _i3c_slave_edma_transfer


#include <fsl_i3c_edma.h>
I3C slave transfer structure. 

Public Members


uint32_t event

Reason the callback is being invoked. 




uint8_t *txData

Transfer buffer 




size_t txDataSize

Transfer size 




uint8_t *rxData

Transfer buffer 




size_t rxDataSize

Transfer size 




status_t completionStatus

Success or error code describing how the transfer completed. Only applies for kI3C_SlaveCompletionEvent. 







struct _i3c_slave_edma_handle


#include <fsl_i3c_edma.h>
I3C slave edma handle structure. 

Note
The contents of this structure are private and subject to change. 


Public Members


I3C_Type *base

I3C base pointer. 




i3c_slave_edma_transfer_t transfer

I3C slave transfer copy. 




bool isBusy

Whether transfer is busy. 




bool wasTransmit

Whether the last transfer was a transmit. 




bool isDdrMode

Whether this is HDR-DDR transfer. 




uint32_t eventMask

Mask of enabled events. 




i3c_slave_edma_callback_t callback

Callback function called at transfer event. 




edma_handle_t *rxDmaHandle

Handle for receive DMA channel. 




edma_handle_t *txDmaHandle

Handle for transmit DMA channel. 




void *userData

Callback parameter passed to callback. 







INPUTMUX: Input Multiplexing Driver#


enum _inputmux_index_t

Values:


enumerator kINPUTMUX_INDEX_CTIMER0CAPTSEL0





enumerator kINPUTMUX_INDEX_CTIMER0CAPTSEL1





enumerator kINPUTMUX_INDEX_CTIMER0CAPTSEL2





enumerator kINPUTMUX_INDEX_CTIMER0CAPTSEL3





enumerator kINPUTMUX_INDEX_CTIMER1CAPTSEL0





enumerator kINPUTMUX_INDEX_CTIMER1CAPTSEL1





enumerator kINPUTMUX_INDEX_CTIMER1CAPTSEL2





enumerator kINPUTMUX_INDEX_CTIMER1CAPTSEL3





enumerator kINPUTMUX_INDEX_CTIMER2CAPTSEL0





enumerator kINPUTMUX_INDEX_CTIMER2CAPTSEL1





enumerator kINPUTMUX_INDEX_CTIMER2CAPTSEL2





enumerator kINPUTMUX_INDEX_CTIMER2CAPTSEL3





enumerator kINPUTMUX_INDEX_CTIMER3CAPTSEL0





enumerator kINPUTMUX_INDEX_CTIMER3CAPTSEL1





enumerator kINPUTMUX_INDEX_CTIMER3CAPTSEL2





enumerator kINPUTMUX_INDEX_CTIMER3CAPTSEL3





enumerator kINPUTMUX_INDEX_CTIMER4CAPTSEL0





enumerator kINPUTMUX_INDEX_CTIMER4CAPTSEL1





enumerator kINPUTMUX_INDEX_CTIMER4CAPTSEL2





enumerator kINPUTMUX_INDEX_CTIMER4CAPTSEL3





enumerator kINPUTMUX_INDEX_SMARTDMA_TRIGSEL0





enumerator kINPUTMUX_INDEX_SMARTDMA_TRIGSEL1





enumerator kINPUTMUX_INDEX_SMARTDMA_TRIGSEL2





enumerator kINPUTMUX_INDEX_SMARTDMA_TRIGSEL3





enumerator kINPUTMUX_INDEX_SMARTDMA_TRIGSEL4





enumerator kINPUTMUX_INDEX_SMARTDMA_TRIGSEL5





enumerator kINPUTMUX_INDEX_SMARTDMA_TRIGSEL6





enumerator kINPUTMUX_INDEX_SMARTDMA_TRIGSEL7





enumerator kINPUTMUX_INDEX_ADC0_TRIGSEL0





enumerator kINPUTMUX_INDEX_ADC0_TRIGSEL1





enumerator kINPUTMUX_INDEX_ADC0_TRIGSEL2





enumerator kINPUTMUX_INDEX_ADC0_TRIGSEL3





enumerator kINPUTMUX_INDEX_ADC1_TRIGSEL0





enumerator kINPUTMUX_INDEX_ADC1_TRIGSEL1





enumerator kINPUTMUX_INDEX_ADC1_TRIGSEL2





enumerator kINPUTMUX_INDEX_ADC1_TRIGSEL3





enumerator kINPUTMUX_INDEX_ADC2_TRIGSEL0





enumerator kINPUTMUX_INDEX_ADC2_TRIGSEL1





enumerator kINPUTMUX_INDEX_ADC2_TRIGSEL2





enumerator kINPUTMUX_INDEX_ADC2_TRIGSEL3





enumerator kINPUTMUX_INDEX_AOI0_TRIGSEL0





enumerator kINPUTMUX_INDEX_AOI0_TRIGSEL1





enumerator kINPUTMUX_INDEX_AOI0_TRIGSEL2





enumerator kINPUTMUX_INDEX_AOI0_TRIGSEL3





enumerator kINPUTMUX_INDEX_AOI0_TRIGSEL4





enumerator kINPUTMUX_INDEX_AOI0_TRIGSEL5





enumerator kINPUTMUX_INDEX_AOI0_TRIGSEL6





enumerator kINPUTMUX_INDEX_AOI0_TRIGSEL7





enumerator kINPUTMUX_INDEX_AOI0_TRIGSEL8





enumerator kINPUTMUX_INDEX_AOI0_TRIGSEL9





enumerator kINPUTMUX_INDEX_AOI0_TRIGSEL10





enumerator kINPUTMUX_INDEX_AOI0_TRIGSEL11





enumerator kINPUTMUX_INDEX_AOI0_TRIGSEL12





enumerator kINPUTMUX_INDEX_AOI0_TRIGSEL13





enumerator kINPUTMUX_INDEX_AOI0_TRIGSEL14





enumerator kINPUTMUX_INDEX_AOI0_TRIGSEL15





enumerator kINPUTMUX_INDEX_TRIG_OUTSEL0





enumerator kINPUTMUX_INDEX_TRIG_OUTSEL1





enumerator kINPUTMUX_INDEX_TRIG_OUTSEL2





enumerator kINPUTMUX_INDEX_TRIG_OUTSEL3





enumerator kINPUTMUX_INDEX_TRIG_OUTSEL4





enumerator kINPUTMUX_INDEX_TRIG_OUTSEL6





enumerator kINPUTMUX_INDEX_TRIG_OUTSEL7





enumerator kINPUTMUX_INDEX_FLEXIO_TRIGSEL0





enumerator kINPUTMUX_INDEX_FLEXIO_TRIGSEL1





enumerator kINPUTMUX_INDEX_FLEXIO_TRIGSEL2





enumerator kINPUTMUX_INDEX_FLEXIO_TRIGSEL3





enumerator kINPUTMUX_INDEX_ENET_TRIGSEL0





enumerator kINPUTMUX_INDEX_ENET_TRIGSEL1







enum _inputmux_connection_t

INPUTMUX connections type. 
Values:


enumerator kINPUTMUX_Ctinp0ToCtimer0cap





enumerator kINPUTMUX_Ctinp1ToCtimer0cap





enumerator kINPUTMUX_Ctinp2ToCtimer0cap





enumerator kINPUTMUX_Ctinp3ToCtimer0cap





enumerator kINPUTMUX_Ctinp4ToCtimer0cap





enumerator kINPUTMUX_Ctinp5ToCtimer0cap





enumerator kINPUTMUX_Ctinp6ToCtimer0cap





enumerator kINPUTMUX_Ctinp7ToCtimer0cap





enumerator kINPUTMUX_Ctinp8ToCtimer0cap





enumerator kINPUTMUX_Ctinp9ToCtimer0cap





enumerator kINPUTMUX_Ctinp10ToCtimer0cap





enumerator kINPUTMUX_Ctinp11ToCtimer0cap





enumerator kINPUTMUX_Ctinp12ToCtimer0cap





enumerator kINPUTMUX_Ctinp13ToCtimer0cap





enumerator kINPUTMUX_Ctinp14ToCtimer0cap





enumerator kINPUTMUX_Ctinp15ToCtimer0cap





enumerator kINPUTMUX_Ctinp16ToCtimer0cap





enumerator kINPUTMUX_Ctinp17ToCtimer0cap





enumerator kINPUTMUX_Ctinp18ToCtimer0cap





enumerator kINPUTMUX_Ctinp19ToCtimer0cap





enumerator kINPUTMUX_Aoi0out0ToCtimer0cap





enumerator kINPUTMUX_Aoi0out1ToCtimer0cap





enumerator kINPUTMUX_Aoi0out2ToCtimer0cap





enumerator kINPUTMUX_Aoi0out3ToCtimer0cap





enumerator kINPUTMUX_Adc0tcomp0ToCtimer0cap





enumerator kINPUTMUX_Adc0tcomp1ToCtimer0cap





enumerator kINPUTMUX_Adc0tcomp2ToCtimer0cap





enumerator kINPUTMUX_Adc0tcomp3ToCtimer0cap





enumerator kINPUTMUX_Cmp0outToCtimer0cap





enumerator kINPUTMUX_Ctimer1mat1ToCtimer0cap





enumerator kINPUTMUX_Ctimer1mat2ToCtimer0cap





enumerator kINPUTMUX_Ctimer1mat3ToCtimer0cap





enumerator kINPUTMUX_Ctimer2mat1ToCtimer0cap





enumerator kINPUTMUX_Ctimer2mat2ToCtimer0cap





enumerator kINPUTMUX_Ctimer2mat3ToCtimer0cap





enumerator kINPUTMUX_Lpi2c0masterendofpacketToCtimer0cap





enumerator kINPUTMUX_Lpi2c0slaveendofpacketToCtimer0cap





enumerator kINPUTMUX_Lpi2c1masterendofpacketToCtimer0cap





enumerator kINPUTMUX_Lpi2c1slaveendofpacketToCtimer0cap





enumerator kINPUTMUX_Lpspi0endofframeToCtimer0cap





enumerator kINPUTMUX_Lpspi0receiveddatawordToCtimer0cap





enumerator kINPUTMUX_Lpspi1endofframeToCtimer0cap





enumerator kINPUTMUX_Lpspi1receiveddatawordToCtimer0cap





enumerator kINPUTMUX_Lpuart0receiveddatawordToCtimer0cap





enumerator kINPUTMUX_Lpuart0transmitteddatawordToCtimer0cap





enumerator kINPUTMUX_Lpuart0receivelineidleToCtimer0cap





enumerator kINPUTMUX_Lpuart1receiveddatawordToCtimer0cap





enumerator kINPUTMUX_Lpuart1transmitteddatawordToCtimer0cap





enumerator kINPUTMUX_Lpuart1receivelineidleToCtimer0cap





enumerator kINPUTMUX_Lpuart2receiveddatawordToCtimer0cap





enumerator kINPUTMUX_Lpuart2transmitteddatawordToCtimer0cap





enumerator kINPUTMUX_Lpuart2receivelineidleToCtimer0cap





enumerator kINPUTMUX_Lpuart3receiveddatawordToCtimer0cap





enumerator kINPUTMUX_Lpuart3transmitteddatawordToCtimer0cap





enumerator kINPUTMUX_Lpuart3receivelineidleToCtimer0cap





enumerator kINPUTMUX_Lpuart4receiveddatawordToCtimer0cap





enumerator kINPUTMUX_Lpuart4transmitteddatawordToCtimer0cap





enumerator kINPUTMUX_Lpuart4receivelineidleToCtimer0cap





enumerator kINPUTMUX_Adc1tcomp0ToCtimer0cap





enumerator kINPUTMUX_Adc1tcomp1ToCtimer0cap





enumerator kINPUTMUX_Adc1tcomp2ToCtimer0cap





enumerator kINPUTMUX_Adc1tcomp3ToCtimer0cap





enumerator kINPUTMUX_Ctimer3mat1ToCtimer0cap





enumerator kINPUTMUX_Ctimer3mat2ToCtimer0cap





enumerator kINPUTMUX_Ctimer3mat3ToCtimer0cap





enumerator kINPUTMUX_Ctimer4mat1ToCtimer0cap





enumerator kINPUTMUX_Ctimer4mat2ToCtimer0cap





enumerator kINPUTMUX_Ctimer4mat3ToCtimer0cap





enumerator kINPUTMUX_Lpi2c2masterendofpacketToCtimer0cap





enumerator kINPUTMUX_Lpi2c2slaveendofpacketToCtimer0cap





enumerator kINPUTMUX_Lpi2c3masterendofpacketToCtimer0cap





enumerator kINPUTMUX_Lpi2c3slaveendofpacketToCtimer0cap





enumerator kINPUTMUX_Lpuart5receiveddatawordToCtimer0cap





enumerator kINPUTMUX_Lpuart5transmitteddatawordToCtimer0cap





enumerator kINPUTMUX_Lpuart5receivelineidleToCtimer0cap





enumerator kINPUTMUX_Trigin0ToCtimer0cap





enumerator kINPUTMUX_Trigin1ToCtimer0cap





enumerator kINPUTMUX_Trigin2ToCtimer0cap





enumerator kINPUTMUX_Trigin3ToCtimer0cap





enumerator kINPUTMUX_Trigin4ToCtimer0cap





enumerator kINPUTMUX_Trigin5ToCtimer0cap





enumerator kINPUTMUX_Trigin6ToCtimer0cap





enumerator kINPUTMUX_Trigin7ToCtimer0cap





enumerator kINPUTMUX_Trigin8ToCtimer0cap





enumerator kINPUTMUX_Trigin9ToCtimer0cap





enumerator kINPUTMUX_Trigin10ToCtimer0cap





enumerator kINPUTMUX_Trigin11ToCtimer0cap





enumerator kINPUTMUX_Usb1startofframeToCtimer0cap





enumerator kINPUTMUX_Lpspi2endofframeToCtimer0cap





enumerator kINPUTMUX_Lpspi2receiveddatawordToCtimer0cap





enumerator kINPUTMUX_Lpspi3endofframeToCtimer0cap





enumerator kINPUTMUX_Lpspi3receiveddatawordToCtimer0cap





enumerator kINPUTMUX_Lpspi4endofframeToCtimer0cap





enumerator kINPUTMUX_Lpspi4receiveddatawordToCtimer0cap





enumerator kINPUTMUX_Lpspi5endofframeToCtimer0cap





enumerator kINPUTMUX_Lpspi5receiveddatawordToCtimer0cap





enumerator kINPUTMUX_Ctinp0ToCtimer1cap





enumerator kINPUTMUX_Ctinp1ToCtimer1cap





enumerator kINPUTMUX_Ctinp2ToCtimer1cap





enumerator kINPUTMUX_Ctinp3ToCtimer1cap





enumerator kINPUTMUX_Ctinp4ToCtimer1cap





enumerator kINPUTMUX_Ctinp5ToCtimer1cap





enumerator kINPUTMUX_Ctinp6ToCtimer1cap





enumerator kINPUTMUX_Ctinp7ToCtimer1cap





enumerator kINPUTMUX_Ctinp8ToCtimer1cap





enumerator kINPUTMUX_Ctinp9ToCtimer1cap





enumerator kINPUTMUX_Ctinp10ToCtimer1cap





enumerator kINPUTMUX_Ctinp11ToCtimer1cap





enumerator kINPUTMUX_Ctinp12ToCtimer1cap





enumerator kINPUTMUX_Ctinp13ToCtimer1cap





enumerator kINPUTMUX_Ctinp14ToCtimer1cap





enumerator kINPUTMUX_Ctinp15ToCtimer1cap





enumerator kINPUTMUX_Ctinp16ToCtimer1cap





enumerator kINPUTMUX_Ctinp17ToCtimer1cap





enumerator kINPUTMUX_Ctinp18ToCtimer1cap





enumerator kINPUTMUX_Ctinp19ToCtimer1cap





enumerator kINPUTMUX_Aoi0out0ToCtimer1cap





enumerator kINPUTMUX_Aoi0out1ToCtimer1cap





enumerator kINPUTMUX_Aoi0out2ToCtimer1cap





enumerator kINPUTMUX_Aoi0out3ToCtimer1cap





enumerator kINPUTMUX_Adc0tcomp0ToCtimer1cap





enumerator kINPUTMUX_Adc0tcomp1ToCtimer1cap





enumerator kINPUTMUX_Adc0tcomp2ToCtimer1cap





enumerator kINPUTMUX_Adc0tcomp3ToCtimer1cap





enumerator kINPUTMUX_Cmp0outToCtimer1cap





enumerator kINPUTMUX_Ctimer0mat1ToCtimer1cap





enumerator kINPUTMUX_Ctimer0mat2ToCtimer1cap





enumerator kINPUTMUX_Ctimer0mat3ToCtimer1cap





enumerator kINPUTMUX_Ctimer2mat1ToCtimer1cap





enumerator kINPUTMUX_Ctimer2mat2ToCtimer1cap





enumerator kINPUTMUX_Ctimer2mat3ToCtimer1cap





enumerator kINPUTMUX_Lpi2c0masterendofpacketToCtimer1cap





enumerator kINPUTMUX_Lpi2c0slaveendofpacketToCtimer1cap





enumerator kINPUTMUX_Lpi2c1masterendofpacketToCtimer1cap





enumerator kINPUTMUX_Lpi2c1slaveendofpacketToCtimer1cap





enumerator kINPUTMUX_Lpspi0endofframeToCtimer1cap





enumerator kINPUTMUX_Lpspi0receiveddatawordToCtimer1cap





enumerator kINPUTMUX_Lpspi1endofframeToCtimer1cap





enumerator kINPUTMUX_Lpspi1receiveddatawordToCtimer1cap





enumerator kINPUTMUX_Lpuart0receiveddatawordToCtimer1cap





enumerator kINPUTMUX_Lpuart0transmitteddatawordToCtimer1cap





enumerator kINPUTMUX_Lpuart0receivelineidleToCtimer1cap





enumerator kINPUTMUX_Lpuart1receiveddatawordToCtimer1cap





enumerator kINPUTMUX_Lpuart1transmitteddatawordToCtimer1cap





enumerator kINPUTMUX_Lpuart1receivelineidleToCtimer1cap





enumerator kINPUTMUX_Lpuart2receiveddatawordToCtimer1cap





enumerator kINPUTMUX_Lpuart2transmitteddatawordToCtimer1cap





enumerator kINPUTMUX_Lpuart2receivelineidleToCtimer1cap





enumerator kINPUTMUX_Lpuart3receiveddatawordToCtimer1cap





enumerator kINPUTMUX_Lpuart3transmitteddatawordToCtimer1cap





enumerator kINPUTMUX_Lpuart3receivelineidleToCtimer1cap





enumerator kINPUTMUX_Lpuart4receiveddatawordToCtimer1cap





enumerator kINPUTMUX_Lpuart4transmitteddatawordToCtimer1cap





enumerator kINPUTMUX_Lpuart4receivelineidleToCtimer1cap





enumerator kINPUTMUX_Adc1tcomp0ToCtimer1cap





enumerator kINPUTMUX_Adc1tcomp1ToCtimer1cap





enumerator kINPUTMUX_Adc1tcomp2ToCtimer1cap





enumerator kINPUTMUX_Adc1tcomp3ToCtimer1cap





enumerator kINPUTMUX_Ctimer3mat1ToCtimer1cap





enumerator kINPUTMUX_Ctimer3mat2ToCtimer1cap





enumerator kINPUTMUX_Ctimer3mat3ToCtimer1cap





enumerator kINPUTMUX_Ctimer4mat1ToCtimer1cap





enumerator kINPUTMUX_Ctimer4mat2ToCtimer1cap





enumerator kINPUTMUX_Ctimer4mat3ToCtimer1cap





enumerator kINPUTMUX_Lpi2c2masterendofpacketToCtimer1cap





enumerator kINPUTMUX_Lpi2c2slaveendofpacketToCtimer1cap





enumerator kINPUTMUX_Lpi2c3masterendofpacketToCtimer1cap





enumerator kINPUTMUX_Lpi2c3slaveendofpacketToCtimer1cap





enumerator kINPUTMUX_Lpuart5receiveddatawordToCtimer1cap





enumerator kINPUTMUX_Lpuart5transmitteddatawordToCtimer1cap





enumerator kINPUTMUX_Lpuart5receivelineidleToCtimer1cap





enumerator kINPUTMUX_Trigin0ToCtimer1cap





enumerator kINPUTMUX_Trigin1ToCtimer1cap





enumerator kINPUTMUX_Trigin2ToCtimer1cap





enumerator kINPUTMUX_Trigin3ToCtimer1cap





enumerator kINPUTMUX_Trigin4ToCtimer1cap





enumerator kINPUTMUX_Trigin5ToCtimer1cap





enumerator kINPUTMUX_Trigin6ToCtimer1cap





enumerator kINPUTMUX_Trigin7ToCtimer1cap





enumerator kINPUTMUX_Trigin8ToCtimer1cap





enumerator kINPUTMUX_Trigin9ToCtimer1cap





enumerator kINPUTMUX_Trigin10ToCtimer1cap





enumerator kINPUTMUX_Trigin11ToCtimer1cap





enumerator kINPUTMUX_Usb1startofframeToCtimer1cap





enumerator kINPUTMUX_Lpspi2endofframeToCtimer1cap





enumerator kINPUTMUX_Lpspi2receiveddatawordToCtimer1cap





enumerator kINPUTMUX_Lpspi3endofframeToCtimer1cap





enumerator kINPUTMUX_Lpspi3receiveddatawordToCtimer1cap





enumerator kINPUTMUX_Lpspi4endofframeToCtimer1cap





enumerator kINPUTMUX_Lpspi4receiveddatawordToCtimer1cap





enumerator kINPUTMUX_Lpspi5endofframeToCtimer1cap





enumerator kINPUTMUX_Lpspi5receiveddatawordToCtimer1cap





enumerator kINPUTMUX_Ctinp0ToCtimer2cap





enumerator kINPUTMUX_Ctinp1ToCtimer2cap





enumerator kINPUTMUX_Ctinp2ToCtimer2cap





enumerator kINPUTMUX_Ctinp3ToCtimer2cap





enumerator kINPUTMUX_Ctinp4ToCtimer2cap





enumerator kINPUTMUX_Ctinp5ToCtimer2cap





enumerator kINPUTMUX_Ctinp6ToCtimer2cap





enumerator kINPUTMUX_Ctinp7ToCtimer2cap





enumerator kINPUTMUX_Ctinp8ToCtimer2cap





enumerator kINPUTMUX_Ctinp9ToCtimer2cap





enumerator kINPUTMUX_Ctinp10ToCtimer2cap





enumerator kINPUTMUX_Ctinp11ToCtimer2cap





enumerator kINPUTMUX_Ctinp12ToCtimer2cap





enumerator kINPUTMUX_Ctinp13ToCtimer2cap





enumerator kINPUTMUX_Ctinp14ToCtimer2cap





enumerator kINPUTMUX_Ctinp15ToCtimer2cap





enumerator kINPUTMUX_Ctinp16ToCtimer2cap





enumerator kINPUTMUX_Ctinp17ToCtimer2cap





enumerator kINPUTMUX_Ctinp18ToCtimer2cap





enumerator kINPUTMUX_Ctinp19ToCtimer2cap





enumerator kINPUTMUX_Aoi0out0ToCtimer2cap





enumerator kINPUTMUX_Aoi0out1ToCtimer2cap





enumerator kINPUTMUX_Aoi0out2ToCtimer2cap





enumerator kINPUTMUX_Aoi0out3ToCtimer2cap





enumerator kINPUTMUX_Adc0tcomp0ToCtimer2cap





enumerator kINPUTMUX_Adc0tcomp1ToCtimer2cap





enumerator kINPUTMUX_Adc0tcomp2ToCtimer2cap





enumerator kINPUTMUX_Adc0tcomp3ToCtimer2cap





enumerator kINPUTMUX_Cmp0outToCtimer2cap





enumerator kINPUTMUX_Ctimer0mat1ToCtimer2cap





enumerator kINPUTMUX_Ctimer0mat2ToCtimer2cap





enumerator kINPUTMUX_Ctimer0mat3ToCtimer2cap





enumerator kINPUTMUX_Ctimer1mat1ToCtimer2cap





enumerator kINPUTMUX_Ctimer1mat2ToCtimer2cap





enumerator kINPUTMUX_Ctimer1mat3ToCtimer2cap





enumerator kINPUTMUX_Lpi2c0masterendofpacketToCtimer2cap





enumerator kINPUTMUX_Lpi2c0slaveendofpacketToCtimer2cap





enumerator kINPUTMUX_Lpi2c1masterendofpacketToCtimer2cap





enumerator kINPUTMUX_Lpi2c1slaveendofpacketToCtimer2cap





enumerator kINPUTMUX_Lpspi0endofframeToCtimer2cap





enumerator kINPUTMUX_Lpspi0receiveddatawordToCtimer2cap





enumerator kINPUTMUX_Lpspi1endofframeToCtimer2cap





enumerator kINPUTMUX_Lpspi1receiveddatawordToCtimer2cap





enumerator kINPUTMUX_Lpuart0receiveddatawordToCtimer2cap





enumerator kINPUTMUX_Lpuart0transmitteddatawordToCtimer2cap





enumerator kINPUTMUX_Lpuart0receivelineidleToCtimer2cap





enumerator kINPUTMUX_Lpuart1receiveddatawordToCtimer2cap





enumerator kINPUTMUX_Lpuart1transmitteddatawordToCtimer2cap





enumerator kINPUTMUX_Lpuart1receivelineidleToCtimer2cap





enumerator kINPUTMUX_Lpuart2receiveddatawordToCtimer2cap





enumerator kINPUTMUX_Lpuart2transmitteddatawordToCtimer2cap





enumerator kINPUTMUX_Lpuart2receivelineidleToCtimer2cap





enumerator kINPUTMUX_Lpuart3receiveddatawordToCtimer2cap





enumerator kINPUTMUX_Lpuart3transmitteddatawordToCtimer2cap





enumerator kINPUTMUX_Lpuart3receivelineidleToCtimer2cap





enumerator kINPUTMUX_Lpuart4receiveddatawordToCtimer2cap





enumerator kINPUTMUX_Lpuart4transmitteddatawordToCtimer2cap





enumerator kINPUTMUX_Lpuart4receivelineidleToCtimer2cap





enumerator kINPUTMUX_Adc1tcomp0ToCtimer2cap





enumerator kINPUTMUX_Adc1tcomp1ToCtimer2cap





enumerator kINPUTMUX_Adc1tcomp2ToCtimer2cap





enumerator kINPUTMUX_Adc1tcomp3ToCtimer2cap





enumerator kINPUTMUX_Ctimer3mat1ToCtimer2cap





enumerator kINPUTMUX_Ctimer3mat2ToCtimer2cap





enumerator kINPUTMUX_Ctimer3mat3ToCtimer2cap





enumerator kINPUTMUX_Ctimer4mat1ToCtimer2cap





enumerator kINPUTMUX_Ctimer4mat2ToCtimer2cap





enumerator kINPUTMUX_Ctimer4mat3ToCtimer2cap





enumerator kINPUTMUX_Lpi2c2masterendofpacketToCtimer2cap





enumerator kINPUTMUX_Lpi2c2slaveendofpacketToCtimer2cap





enumerator kINPUTMUX_Lpi2c3masterendofpacketToCtimer2cap





enumerator kINPUTMUX_Lpi2c3slaveendofpacketToCtimer2cap





enumerator kINPUTMUX_Lpuart5receiveddatawordToCtimer2cap





enumerator kINPUTMUX_Lpuart5transmitteddatawordToCtimer2cap





enumerator kINPUTMUX_Lpuart5receivelineidleToCtimer2cap





enumerator kINPUTMUX_Trigin0ToCtimer2cap





enumerator kINPUTMUX_Trigin1ToCtimer2cap





enumerator kINPUTMUX_Trigin2ToCtimer2cap





enumerator kINPUTMUX_Trigin3ToCtimer2cap





enumerator kINPUTMUX_Trigin4ToCtimer2cap





enumerator kINPUTMUX_Trigin5ToCtimer2cap





enumerator kINPUTMUX_Trigin6ToCtimer2cap





enumerator kINPUTMUX_Trigin7ToCtimer2cap





enumerator kINPUTMUX_Trigin8ToCtimer2cap





enumerator kINPUTMUX_Trigin9ToCtimer2cap





enumerator kINPUTMUX_Trigin10ToCtimer2cap





enumerator kINPUTMUX_Trigin11ToCtimer2cap





enumerator kINPUTMUX_Usb1startofframeToCtimer2cap





enumerator kINPUTMUX_Lpspi2endofframeToCtimer2cap





enumerator kINPUTMUX_Lpspi2receiveddatawordToCtimer2cap





enumerator kINPUTMUX_Lpspi3endofframeToCtimer2cap





enumerator kINPUTMUX_Lpspi3receiveddatawordToCtimer2cap





enumerator kINPUTMUX_Lpspi4endofframeToCtimer2cap





enumerator kINPUTMUX_Lpspi4receiveddatawordToCtimer2cap





enumerator kINPUTMUX_Lpspi5endofframeToCtimer2cap





enumerator kINPUTMUX_Lpspi5receiveddatawordToCtimer2cap





enumerator kINPUTMUX_Ctinp0ToCtimer3cap





enumerator kINPUTMUX_Ctinp1ToCtimer3cap





enumerator kINPUTMUX_Ctinp2ToCtimer3cap





enumerator kINPUTMUX_Ctinp3ToCtimer3cap





enumerator kINPUTMUX_Ctinp4ToCtimer3cap





enumerator kINPUTMUX_Ctinp5ToCtimer3cap





enumerator kINPUTMUX_Ctinp6ToCtimer3cap





enumerator kINPUTMUX_Ctinp7ToCtimer3cap





enumerator kINPUTMUX_Ctinp8ToCtimer3cap





enumerator kINPUTMUX_Ctinp9ToCtimer3cap





enumerator kINPUTMUX_Ctinp10ToCtimer3cap





enumerator kINPUTMUX_Ctinp11ToCtimer3cap





enumerator kINPUTMUX_Ctinp12ToCtimer3cap





enumerator kINPUTMUX_Ctinp13ToCtimer3cap





enumerator kINPUTMUX_Ctinp14ToCtimer3cap





enumerator kINPUTMUX_Ctinp15ToCtimer3cap





enumerator kINPUTMUX_Ctinp16ToCtimer3cap





enumerator kINPUTMUX_Ctinp17ToCtimer3cap





enumerator kINPUTMUX_Ctinp18ToCtimer3cap





enumerator kINPUTMUX_Ctinp19ToCtimer3cap





enumerator kINPUTMUX_Aoi0out0ToCtimer3cap





enumerator kINPUTMUX_Aoi0out1ToCtimer3cap





enumerator kINPUTMUX_Aoi0out2ToCtimer3cap





enumerator kINPUTMUX_Aoi0out3ToCtimer3cap





enumerator kINPUTMUX_Adc0tcomp0ToCtimer3cap





enumerator kINPUTMUX_Adc0tcomp1ToCtimer3cap





enumerator kINPUTMUX_Adc0tcomp2ToCtimer3cap





enumerator kINPUTMUX_Adc0tcomp3ToCtimer3cap





enumerator kINPUTMUX_Cmp0outToCtimer3cap





enumerator kINPUTMUX_Ctimer0mat1ToCtimer3cap





enumerator kINPUTMUX_Ctimer0mat2ToCtimer3cap





enumerator kINPUTMUX_Ctimer0mat3ToCtimer3cap





enumerator kINPUTMUX_Ctimer1mat1ToCtimer3cap





enumerator kINPUTMUX_Ctimer1mat2ToCtimer3cap





enumerator kINPUTMUX_Ctimer1mat3ToCtimer3cap





enumerator kINPUTMUX_Lpi2c0masterendofpacketToCtimer3cap





enumerator kINPUTMUX_Lpi2c0slaveendofpacketToCtimer3cap





enumerator kINPUTMUX_Lpi2c1masterendofpacketToCtimer3cap





enumerator kINPUTMUX_Lpi2c1slaveendofpacketToCtimer3cap





enumerator kINPUTMUX_Lpspi0endofframeToCtimer3cap





enumerator kINPUTMUX_Lpspi0receiveddatawordToCtimer3cap





enumerator kINPUTMUX_Lpspi1endofframeToCtimer3cap





enumerator kINPUTMUX_Lpspi1receiveddatawordToCtimer3cap





enumerator kINPUTMUX_Lpuart0receiveddatawordToCtimer3cap





enumerator kINPUTMUX_Lpuart0transmitteddatawordToCtimer3cap





enumerator kINPUTMUX_Lpuart0receivelineidleToCtimer3cap





enumerator kINPUTMUX_Lpuart1receiveddatawordToCtimer3cap





enumerator kINPUTMUX_Lpuart1transmitteddatawordToCtimer3cap





enumerator kINPUTMUX_Lpuart1receivelineidleToCtimer3cap





enumerator kINPUTMUX_Lpuart2receiveddatawordToCtimer3cap





enumerator kINPUTMUX_Lpuart2transmitteddatawordToCtimer3cap





enumerator kINPUTMUX_Lpuart2receivelineidleToCtimer3cap





enumerator kINPUTMUX_Lpuart3receiveddatawordToCtimer3cap





enumerator kINPUTMUX_Lpuart3transmitteddatawordToCtimer3cap





enumerator kINPUTMUX_Lpuart3receivelineidleToCtimer3cap





enumerator kINPUTMUX_Lpuart4receiveddatawordToCtimer3cap





enumerator kINPUTMUX_Lpuart4transmitteddatawordToCtimer3cap





enumerator kINPUTMUX_Lpuart4receivelineidleToCtimer3cap





enumerator kINPUTMUX_Adc1tcomp0ToCtimer3cap





enumerator kINPUTMUX_Adc1tcomp1ToCtimer3cap





enumerator kINPUTMUX_Adc1tcomp2ToCtimer3cap





enumerator kINPUTMUX_Adc1tcomp3ToCtimer3cap





enumerator kINPUTMUX_Ctimer2mat1ToCtimer3cap





enumerator kINPUTMUX_Ctimer2mat2ToCtimer3cap





enumerator kINPUTMUX_Ctimer2mat3ToCtimer3cap





enumerator kINPUTMUX_Ctimer4mat1ToCtimer3cap





enumerator kINPUTMUX_Ctimer4mat2ToCtimer3cap





enumerator kINPUTMUX_Ctimer4mat3ToCtimer3cap





enumerator kINPUTMUX_Lpi2c2masterendofpacketToCtimer3cap





enumerator kINPUTMUX_Lpi2c2slaveendofpacketToCtimer3cap





enumerator kINPUTMUX_Lpi2c3masterendofpacketToCtimer3cap





enumerator kINPUTMUX_Lpi2c3slaveendofpacketToCtimer3cap





enumerator kINPUTMUX_Lpuart5receiveddatawordToCtimer3cap





enumerator kINPUTMUX_Lpuart5transmitteddatawordToCtimer3cap





enumerator kINPUTMUX_Lpuart5receivelineidleToCtimer3cap





enumerator kINPUTMUX_Tmprout0ToCtimer3cap





enumerator kINPUTMUX_Tmprout1ToCtimer3cap





enumerator kINPUTMUX_Trigin0ToCtimer3cap





enumerator kINPUTMUX_Trigin1ToCtimer3cap





enumerator kINPUTMUX_Trigin2ToCtimer3cap





enumerator kINPUTMUX_Trigin3ToCtimer3cap





enumerator kINPUTMUX_Trigin4ToCtimer3cap





enumerator kINPUTMUX_Trigin5ToCtimer3cap





enumerator kINPUTMUX_Trigin6ToCtimer3cap





enumerator kINPUTMUX_Trigin7ToCtimer3cap





enumerator kINPUTMUX_Trigin8ToCtimer3cap





enumerator kINPUTMUX_Trigin9ToCtimer3cap





enumerator kINPUTMUX_Trigin10ToCtimer3cap





enumerator kINPUTMUX_Trigin11ToCtimer3cap





enumerator kINPUTMUX_Usb1startofframeToCtimer3cap





enumerator kINPUTMUX_Lpspi2endofframeToCtimer3cap





enumerator kINPUTMUX_Lpspi2receiveddatawordToCtimer3cap





enumerator kINPUTMUX_Lpspi3endofframeToCtimer3cap





enumerator kINPUTMUX_Lpspi3receiveddatawordToCtimer3cap





enumerator kINPUTMUX_Lpspi4endofframeToCtimer3cap





enumerator kINPUTMUX_Lpspi4receiveddatawordToCtimer3cap





enumerator kINPUTMUX_Lpspi5endofframeToCtimer3cap





enumerator kINPUTMUX_Lpspi5receiveddatawordToCtimer3cap





enumerator kINPUTMUX_Ctinp0ToCtimer4cap





enumerator kINPUTMUX_Ctinp1ToCtimer4cap





enumerator kINPUTMUX_Ctinp2ToCtimer4cap





enumerator kINPUTMUX_Ctinp3ToCtimer4cap





enumerator kINPUTMUX_Ctinp4ToCtimer4cap





enumerator kINPUTMUX_Ctinp5ToCtimer4cap





enumerator kINPUTMUX_Ctinp6ToCtimer4cap





enumerator kINPUTMUX_Ctinp7ToCtimer4cap





enumerator kINPUTMUX_Ctinp8ToCtimer4cap





enumerator kINPUTMUX_Ctinp9ToCtimer4cap





enumerator kINPUTMUX_Ctinp10ToCtimer4cap





enumerator kINPUTMUX_Ctinp11ToCtimer4cap





enumerator kINPUTMUX_Ctinp12ToCtimer4cap





enumerator kINPUTMUX_Ctinp13ToCtimer4cap





enumerator kINPUTMUX_Ctinp14ToCtimer4cap





enumerator kINPUTMUX_Ctinp15ToCtimer4cap





enumerator kINPUTMUX_Ctinp16ToCtimer4cap





enumerator kINPUTMUX_Ctinp17ToCtimer4cap





enumerator kINPUTMUX_Ctinp18ToCtimer4cap





enumerator kINPUTMUX_Ctinp19ToCtimer4cap





enumerator kINPUTMUX_Aoi0out0ToCtimer4cap





enumerator kINPUTMUX_Aoi0out1ToCtimer4cap





enumerator kINPUTMUX_Aoi0out2ToCtimer4cap





enumerator kINPUTMUX_Aoi0out3ToCtimer4cap





enumerator kINPUTMUX_Adc0tcomp0ToCtimer4cap





enumerator kINPUTMUX_Adc0tcomp1ToCtimer4cap





enumerator kINPUTMUX_Adc0tcomp2ToCtimer4cap





enumerator kINPUTMUX_Adc0tcomp3ToCtimer4cap





enumerator kINPUTMUX_Cmp0outToCtimer4cap





enumerator kINPUTMUX_Ctimer0mat1ToCtimer4cap





enumerator kINPUTMUX_Ctimer0mat2ToCtimer4cap





enumerator kINPUTMUX_Ctimer0mat3ToCtimer4cap





enumerator kINPUTMUX_Ctimer1mat1ToCtimer4cap





enumerator kINPUTMUX_Ctimer1mat2ToCtimer4cap





enumerator kINPUTMUX_Ctimer1mat3ToCtimer4cap





enumerator kINPUTMUX_Lpi2c0masterendofpacketToCtimer4cap





enumerator kINPUTMUX_Lpi2c0slaveendofpacketToCtimer4cap





enumerator kINPUTMUX_Lpi2c1masterendofpacketToCtimer4cap





enumerator kINPUTMUX_Lpi2c1slaveendofpacketToCtimer4cap





enumerator kINPUTMUX_Lpspi0endofframeToCtimer4cap





enumerator kINPUTMUX_Lpspi0receiveddatawordToCtimer4cap





enumerator kINPUTMUX_Lpspi1endofframeToCtimer4cap





enumerator kINPUTMUX_Lpspi1receiveddatawordToCtimer4cap





enumerator kINPUTMUX_Lpuart0receiveddatawordToCtimer4cap





enumerator kINPUTMUX_Lpuart0transmitteddatawordToCtimer4cap





enumerator kINPUTMUX_Lpuart0receivelineidleToCtimer4cap





enumerator kINPUTMUX_Lpuart1receiveddatawordToCtimer4cap





enumerator kINPUTMUX_Lpuart1transmitteddatawordToCtimer4cap





enumerator kINPUTMUX_Lpuart1receivelineidleToCtimer4cap





enumerator kINPUTMUX_Lpuart2receiveddatawordToCtimer4cap





enumerator kINPUTMUX_Lpuart2transmitteddatawordToCtimer4cap





enumerator kINPUTMUX_Lpuart2receivelineidleToCtimer4cap





enumerator kINPUTMUX_Lpuart3receiveddatawordToCtimer4cap





enumerator kINPUTMUX_Lpuart3transmitteddatawordToCtimer4cap





enumerator kINPUTMUX_Lpuart3receivelineidleToCtimer4cap





enumerator kINPUTMUX_Lpuart4receiveddatawordToCtimer4cap





enumerator kINPUTMUX_Lpuart4transmitteddatawordToCtimer4cap





enumerator kINPUTMUX_Lpuart4receivelineidleToCtimer4cap





enumerator kINPUTMUX_Adc1tcomp0ToCtimer4cap





enumerator kINPUTMUX_Adc1tcomp1ToCtimer4cap





enumerator kINPUTMUX_Adc1tcomp2ToCtimer4cap





enumerator kINPUTMUX_Adc1tcomp3ToCtimer4cap





enumerator kINPUTMUX_Ctimer2mat1ToCtimer4cap





enumerator kINPUTMUX_Ctimer2mat2ToCtimer4cap





enumerator kINPUTMUX_Ctimer2mat3ToCtimer4cap





enumerator kINPUTMUX_Ctimer3mat1ToCtimer4cap





enumerator kINPUTMUX_Ctimer3mat2ToCtimer4cap





enumerator kINPUTMUX_Ctimer3mat3ToCtimer4cap





enumerator kINPUTMUX_Lpi2c2masterendofpacketToCtimer4cap





enumerator kINPUTMUX_Lpi2c2slaveendofpacketToCtimer4cap





enumerator kINPUTMUX_Lpi2c3masterendofpacketToCtimer4cap





enumerator kINPUTMUX_Lpi2c3slaveendofpacketToCtimer4cap





enumerator kINPUTMUX_Lpuart5receiveddatawordToCtimer4cap





enumerator kINPUTMUX_Lpuart5transmitteddatawordToCtimer4cap





enumerator kINPUTMUX_Lpuart5receivelineidleToCtimer4cap





enumerator kINPUTMUX_Trigin0ToCtimer4cap





enumerator kINPUTMUX_Trigin1ToCtimer4cap





enumerator kINPUTMUX_Trigin2ToCtimer4cap





enumerator kINPUTMUX_Trigin3ToCtimer4cap





enumerator kINPUTMUX_Trigin4ToCtimer4cap





enumerator kINPUTMUX_Trigin5ToCtimer4cap





enumerator kINPUTMUX_Trigin6ToCtimer4cap





enumerator kINPUTMUX_Trigin7ToCtimer4cap





enumerator kINPUTMUX_Trigin8ToCtimer4cap





enumerator kINPUTMUX_Trigin9ToCtimer4cap





enumerator kINPUTMUX_Trigin10ToCtimer4cap





enumerator kINPUTMUX_Trigin11ToCtimer4cap





enumerator kINPUTMUX_Usb1startofframeToCtimer4cap





enumerator kINPUTMUX_Lpspi2endofframeToCtimer4cap





enumerator kINPUTMUX_Lpspi2receiveddatawordToCtimer4cap





enumerator kINPUTMUX_Lpspi3endofframeToCtimer4cap





enumerator kINPUTMUX_Lpspi3receiveddatawordToCtimer4cap





enumerator kINPUTMUX_Lpspi4endofframeToCtimer4cap





enumerator kINPUTMUX_Lpspi4receiveddatawordToCtimer4cap





enumerator kINPUTMUX_Lpspi5endofframeToCtimer4cap





enumerator kINPUTMUX_Lpspi5receiveddatawordToCtimer4cap





enumerator kINPUTMUX_Ctinp0ToTimer0trig





enumerator kINPUTMUX_Ctinp1ToTimer0trig





enumerator kINPUTMUX_Ctinp2ToTimer0trig





enumerator kINPUTMUX_Ctinp3ToTimer0trig





enumerator kINPUTMUX_Ctinp4ToTimer0trig





enumerator kINPUTMUX_Ctinp5ToTimer0trig





enumerator kINPUTMUX_Ctinp6ToTimer0trig





enumerator kINPUTMUX_Ctinp7ToTimer0trig





enumerator kINPUTMUX_Ctinp8ToTimer0trig





enumerator kINPUTMUX_Ctinp9ToTimer0trig





enumerator kINPUTMUX_Ctinp10ToTimer0trig





enumerator kINPUTMUX_Ctinp11ToTimer0trig





enumerator kINPUTMUX_Ctinp12ToTimer0trig





enumerator kINPUTMUX_Ctinp13ToTimer0trig





enumerator kINPUTMUX_Ctinp14ToTimer0trig





enumerator kINPUTMUX_Ctinp15ToTimer0trig





enumerator kINPUTMUX_Ctinp16ToTimer0trig





enumerator kINPUTMUX_Ctinp17ToTimer0trig





enumerator kINPUTMUX_Ctinp18ToTimer0trig





enumerator kINPUTMUX_Ctinp19ToTimer0trig





enumerator kINPUTMUX_Aoi0out0ToTimer0trig





enumerator kINPUTMUX_Aoi0out1ToTimer0trig





enumerator kINPUTMUX_Aoi0out2ToTimer0trig





enumerator kINPUTMUX_Aoi0out3ToTimer0trig





enumerator kINPUTMUX_Adc0tcomp0ToTimer0trig





enumerator kINPUTMUX_Adc0tcomp1ToTimer0trig





enumerator kINPUTMUX_Adc0tcomp2ToTimer0trig





enumerator kINPUTMUX_Adc0tcomp3ToTimer0trig





enumerator kINPUTMUX_Cmp0outToTimer0trig





enumerator kINPUTMUX_Ctimer1mat1ToTimer0trig





enumerator kINPUTMUX_Ctimer1mat2ToTimer0trig





enumerator kINPUTMUX_Ctimer1mat3ToTimer0trig





enumerator kINPUTMUX_Ctimer2mat1ToTimer0trig





enumerator kINPUTMUX_Ctimer2mat2ToTimer0trig





enumerator kINPUTMUX_Ctimer2mat3ToTimer0trig





enumerator kINPUTMUX_Lpi2c0masterendofpacketToTimer0trig





enumerator kINPUTMUX_Lpi2c0slaveendofpacketToTimer0trig





enumerator kINPUTMUX_Lpi2c1masterendofpacketToTimer0trig





enumerator kINPUTMUX_Lpi2c1slaveendofpacketToTimer0trig





enumerator kINPUTMUX_Lpspi0endofframeToTimer0trig





enumerator kINPUTMUX_Lpspi0receiveddatawordToTimer0trig





enumerator kINPUTMUX_Lpspi1endofframeToTimer0trig





enumerator kINPUTMUX_Lpspi1receiveddatawordToTimer0trig





enumerator kINPUTMUX_Lpuart0receiveddatawordToTimer0trig





enumerator kINPUTMUX_Lpuart0transmitteddatawordToTimer0trig





enumerator kINPUTMUX_Lpuart0receivelineidleToTimer0trig





enumerator kINPUTMUX_Lpuart1receiveddatawordToTimer0trig





enumerator kINPUTMUX_Lpuart1transmitteddatawordToTimer0trig





enumerator kINPUTMUX_Lpuart1receivelineidleToTimer0trig





enumerator kINPUTMUX_Lpuart2receiveddatawordToTimer0trig





enumerator kINPUTMUX_Lpuart2transmitteddatawordToTimer0trig





enumerator kINPUTMUX_Lpuart2receivelineidleToTimer0trig





enumerator kINPUTMUX_Lpuart3receiveddatawordToTimer0trig





enumerator kINPUTMUX_Lpuart3transmitteddatawordToTimer0trig





enumerator kINPUTMUX_Lpuart3receivelineidleToTimer0trig





enumerator kINPUTMUX_Lpuart4receiveddatawordToTimer0trig





enumerator kINPUTMUX_Lpuart4transmitteddatawordToTimer0trig





enumerator kINPUTMUX_Lpuart4receivelineidleToTimer0trig





enumerator kINPUTMUX_Adc1tcomp0ToTimer0trig





enumerator kINPUTMUX_Adc1tcomp1ToTimer0trig





enumerator kINPUTMUX_Adc1tcomp2ToTimer0trig





enumerator kINPUTMUX_Adc1tcomp3ToTimer0trig





enumerator kINPUTMUX_Ctimer3mat1ToTimer0trig





enumerator kINPUTMUX_Ctimer3mat2ToTimer0trig





enumerator kINPUTMUX_Ctimer3mat3ToTimer0trig





enumerator kINPUTMUX_Ctimer4mat1ToTimer0trig





enumerator kINPUTMUX_Ctimer4mat2ToTimer0trig





enumerator kINPUTMUX_Ctimer4mat3ToTimer0trig





enumerator kINPUTMUX_Lpi2c2masterendofpacketToTimer0trig





enumerator kINPUTMUX_Lpi2c2slaveendofpacketToTimer0trig





enumerator kINPUTMUX_Lpi2c3masterendofpacketToTimer0trig





enumerator kINPUTMUX_Lpi2c3slaveendofpacketToTimer0trig





enumerator kINPUTMUX_Lpuart5receiveddatawordToTimer0trig





enumerator kINPUTMUX_Lpuart5transmitteddatawordToTimer0trig





enumerator kINPUTMUX_Lpuart5receivelineidleToTimer0trig





enumerator kINPUTMUX_Trigin0ToTimer0trig





enumerator kINPUTMUX_Trigin1ToTimer0trig





enumerator kINPUTMUX_Trigin2ToTimer0trig





enumerator kINPUTMUX_Trigin3ToTimer0trig





enumerator kINPUTMUX_Trigin4ToTimer0trig





enumerator kINPUTMUX_Trigin5ToTimer0trig





enumerator kINPUTMUX_Trigin6ToTimer0trig





enumerator kINPUTMUX_Trigin7ToTimer0trig





enumerator kINPUTMUX_Trigin8ToTimer0trig





enumerator kINPUTMUX_Trigin9ToTimer0trig





enumerator kINPUTMUX_Trigin10ToTimer0trig





enumerator kINPUTMUX_Trigin11ToTimer0trig





enumerator kINPUTMUX_Usb1startofframeToTimer0trig





enumerator kINPUTMUX_Lpspi2endofframeToTimer0trig





enumerator kINPUTMUX_Lpspi2receiveddatawordToTimer0trig





enumerator kINPUTMUX_Lpspi3endofframeToTimer0trig





enumerator kINPUTMUX_Lpspi3receiveddatawordToTimer0trig





enumerator kINPUTMUX_Lpspi4endofframeToTimer0trig





enumerator kINPUTMUX_Lpspi4receiveddatawordToTimer0trig





enumerator kINPUTMUX_Lpspi5endofframeToTimer0trig





enumerator kINPUTMUX_Lpspi5receiveddatawordToTimer0trig





enumerator kINPUTMUX_Ctinp0ToTimer1trig





enumerator kINPUTMUX_Ctinp1ToTimer1trig





enumerator kINPUTMUX_Ctinp2ToTimer1trig





enumerator kINPUTMUX_Ctinp3ToTimer1trig





enumerator kINPUTMUX_Ctinp4ToTimer1trig





enumerator kINPUTMUX_Ctinp5ToTimer1trig





enumerator kINPUTMUX_Ctinp6ToTimer1trig





enumerator kINPUTMUX_Ctinp7ToTimer1trig





enumerator kINPUTMUX_Ctinp8ToTimer1trig





enumerator kINPUTMUX_Ctinp9ToTimer1trig





enumerator kINPUTMUX_Ctinp10ToTimer1trig





enumerator kINPUTMUX_Ctinp11ToTimer1trig





enumerator kINPUTMUX_Ctinp12ToTimer1trig





enumerator kINPUTMUX_Ctinp13ToTimer1trig





enumerator kINPUTMUX_Ctinp14ToTimer1trig





enumerator kINPUTMUX_Ctinp15ToTimer1trig





enumerator kINPUTMUX_Ctinp16ToTimer1trig





enumerator kINPUTMUX_Ctinp17ToTimer1trig





enumerator kINPUTMUX_Ctinp18ToTimer1trig





enumerator kINPUTMUX_Ctinp19ToTimer1trig





enumerator kINPUTMUX_Aoi0out0ToTimer1trig





enumerator kINPUTMUX_Aoi0out1ToTimer1trig





enumerator kINPUTMUX_Aoi0out2ToTimer1trig





enumerator kINPUTMUX_Aoi0out3ToTimer1trig





enumerator kINPUTMUX_Adc0tcomp0ToTimer1trig





enumerator kINPUTMUX_Adc0tcomp1ToTimer1trig





enumerator kINPUTMUX_Adc0tcomp2ToTimer1trig





enumerator kINPUTMUX_Adc0tcomp3ToTimer1trig





enumerator kINPUTMUX_Cmp0outToTimer1trig





enumerator kINPUTMUX_Ctimer0mat1ToTimer1trig





enumerator kINPUTMUX_Ctimer0mat2ToTimer1trig





enumerator kINPUTMUX_Ctimer0mat3ToTimer1trig





enumerator kINPUTMUX_Ctimer2mat1ToTimer1trig





enumerator kINPUTMUX_Ctimer2mat2ToTimer1trig





enumerator kINPUTMUX_Ctimer2mat3ToTimer1trig





enumerator kINPUTMUX_Lpi2c0masterendofpacketToTimer1trig





enumerator kINPUTMUX_Lpi2c0slaveendofpacketToTimer1trig





enumerator kINPUTMUX_Lpi2c1masterendofpacketToTimer1trig





enumerator kINPUTMUX_Lpi2c1slaveendofpacketToTimer1trig





enumerator kINPUTMUX_Lpspi0endofframeToTimer1trig





enumerator kINPUTMUX_Lpspi0receiveddatawordToTimer1trig





enumerator kINPUTMUX_Lpspi1endofframeToTimer1trig





enumerator kINPUTMUX_Lpspi1receiveddatawordToTimer1trig





enumerator kINPUTMUX_Lpuart0receiveddatawordToTimer1trig





enumerator kINPUTMUX_Lpuart0transmitteddatawordToTimer1trig





enumerator kINPUTMUX_Lpuart0receivelineidleToTimer1trig





enumerator kINPUTMUX_Lpuart1receiveddatawordToTimer1trig





enumerator kINPUTMUX_Lpuart1transmitteddatawordToTimer1trig





enumerator kINPUTMUX_Lpuart1receivelineidleToTimer1trig





enumerator kINPUTMUX_Lpuart2receiveddatawordToTimer1trig





enumerator kINPUTMUX_Lpuart2transmitteddatawordToTimer1trig





enumerator kINPUTMUX_Lpuart2receivelineidleToTimer1trig





enumerator kINPUTMUX_Lpuart3receiveddatawordToTimer1trig





enumerator kINPUTMUX_Lpuart3transmitteddatawordToTimer1trig





enumerator kINPUTMUX_Lpuart3receivelineidleToTimer1trig





enumerator kINPUTMUX_Lpuart4receiveddatawordToTimer1trig





enumerator kINPUTMUX_Lpuart4transmitteddatawordToTimer1trig





enumerator kINPUTMUX_Lpuart4receivelineidleToTimer1trig





enumerator kINPUTMUX_Adc1tcomp0ToTimer1trig





enumerator kINPUTMUX_Adc1tcomp1ToTimer1trig





enumerator kINPUTMUX_Adc1tcomp2ToTimer1trig





enumerator kINPUTMUX_Adc1tcomp3ToTimer1trig





enumerator kINPUTMUX_Ctimer3mat1ToTimer1trig





enumerator kINPUTMUX_Ctimer3mat2ToTimer1trig





enumerator kINPUTMUX_Ctimer3mat3ToTimer1trig





enumerator kINPUTMUX_Ctimer4mat1ToTimer1trig





enumerator kINPUTMUX_Ctimer4mat2ToTimer1trig





enumerator kINPUTMUX_Ctimer4mat3ToTimer1trig





enumerator kINPUTMUX_Lpi2c2masterendofpacketToTimer1trig





enumerator kINPUTMUX_Lpi2c2slaveendofpacketToTimer1trig





enumerator kINPUTMUX_Lpi2c3masterendofpacketToTimer1trig





enumerator kINPUTMUX_Lpi2c3slaveendofpacketToTimer1trig





enumerator kINPUTMUX_Lpuart5receiveddatawordToTimer1trig





enumerator kINPUTMUX_Lpuart5transmitteddatawordToTimer1trig





enumerator kINPUTMUX_Lpuart5receivelineidleToTimer1trig





enumerator kINPUTMUX_Trigin0ToTimer1trig





enumerator kINPUTMUX_Trigin1ToTimer1trig





enumerator kINPUTMUX_Trigin2ToTimer1trig





enumerator kINPUTMUX_Trigin3ToTimer1trig





enumerator kINPUTMUX_Trigin4ToTimer1trig





enumerator kINPUTMUX_Trigin5ToTimer1trig





enumerator kINPUTMUX_Trigin6ToTimer1trig





enumerator kINPUTMUX_Trigin7ToTimer1trig





enumerator kINPUTMUX_Trigin8ToTimer1trig





enumerator kINPUTMUX_Trigin9ToTimer1trig





enumerator kINPUTMUX_Trigin10ToTimer1trig





enumerator kINPUTMUX_Trigin11ToTimer1trig





enumerator kINPUTMUX_Usb1startofframeToTimer1trig





enumerator kINPUTMUX_Lpspi2endofframeToTimer1trig





enumerator kINPUTMUX_Lpspi2receiveddatawordToTimer1trig





enumerator kINPUTMUX_Lpspi3endofframeToTimer1trig





enumerator kINPUTMUX_Lpspi3receiveddatawordToTimer1trig





enumerator kINPUTMUX_Lpspi4endofframeToTimer1trig





enumerator kINPUTMUX_Lpspi4receiveddatawordToTimer1trig





enumerator kINPUTMUX_Lpspi5endofframeToTimer1trig





enumerator kINPUTMUX_Lpspi5receiveddatawordToTimer1trig





enumerator kINPUTMUX_Ctinp0ToTimer2trig





enumerator kINPUTMUX_Ctinp1ToTimer2trig





enumerator kINPUTMUX_Ctinp2ToTimer2trig





enumerator kINPUTMUX_Ctinp3ToTimer2trig





enumerator kINPUTMUX_Ctinp4ToTimer2trig





enumerator kINPUTMUX_Ctinp5ToTimer2trig





enumerator kINPUTMUX_Ctinp6ToTimer2trig





enumerator kINPUTMUX_Ctinp7ToTimer2trig





enumerator kINPUTMUX_Ctinp8ToTimer2trig





enumerator kINPUTMUX_Ctinp9ToTimer2trig





enumerator kINPUTMUX_Ctinp10ToTimer2trig





enumerator kINPUTMUX_Ctinp11ToTimer2trig





enumerator kINPUTMUX_Ctinp12ToTimer2trig





enumerator kINPUTMUX_Ctinp13ToTimer2trig





enumerator kINPUTMUX_Ctinp14ToTimer2trig





enumerator kINPUTMUX_Ctinp15ToTimer2trig





enumerator kINPUTMUX_Ctinp16ToTimer2trig





enumerator kINPUTMUX_Ctinp17ToTimer2trig





enumerator kINPUTMUX_Ctinp18ToTimer2trig





enumerator kINPUTMUX_Ctinp19ToTimer2trig





enumerator kINPUTMUX_Aoi0out0ToTimer2trig





enumerator kINPUTMUX_Aoi0out1ToTimer2trig





enumerator kINPUTMUX_Aoi0out2ToTimer2trig





enumerator kINPUTMUX_Aoi0out3ToTimer2trig





enumerator kINPUTMUX_Adc0tcomp0ToTimer2trig





enumerator kINPUTMUX_Adc0tcomp1ToTimer2trig





enumerator kINPUTMUX_Adc0tcomp2ToTimer2trig





enumerator kINPUTMUX_Adc0tcomp3ToTimer2trig





enumerator kINPUTMUX_Cmp0outToTimer2trig





enumerator kINPUTMUX_Ctimer0mat1ToTimer2trig





enumerator kINPUTMUX_Ctimer0mat2ToTimer2trig





enumerator kINPUTMUX_Ctimer0mat3ToTimer2trig





enumerator kINPUTMUX_Ctimer1mat1ToTimer2trig





enumerator kINPUTMUX_Ctimer1mat2ToTimer2trig





enumerator kINPUTMUX_Ctimer1mat3ToTimer2trig





enumerator kINPUTMUX_Lpi2c0masterendofpacketToTimer2trig





enumerator kINPUTMUX_Lpi2c0slaveendofpacketToTimer2trig





enumerator kINPUTMUX_Lpi2c1masterendofpacketToTimer2trig





enumerator kINPUTMUX_Lpi2c1slaveendofpacketToTimer2trig





enumerator kINPUTMUX_Lpspi0endofframeToTimer2trig





enumerator kINPUTMUX_Lpspi0receiveddatawordToTimer2trig





enumerator kINPUTMUX_Lpspi1endofframeToTimer2trig





enumerator kINPUTMUX_Lpspi1receiveddatawordToTimer2trig





enumerator kINPUTMUX_Lpuart0receiveddatawordToTimer2trig





enumerator kINPUTMUX_Lpuart0transmitteddatawordToTimer2trig





enumerator kINPUTMUX_Lpuart0receivelineidleToTimer2trig





enumerator kINPUTMUX_Lpuart1receiveddatawordToTimer2trig





enumerator kINPUTMUX_Lpuart1transmitteddatawordToTimer2trig





enumerator kINPUTMUX_Lpuart1receivelineidleToTimer2trig





enumerator kINPUTMUX_Lpuart2receiveddatawordToTimer2trig





enumerator kINPUTMUX_Lpuart2transmitteddatawordToTimer2trig





enumerator kINPUTMUX_Lpuart2receivelineidleToTimer2trig





enumerator kINPUTMUX_Lpuart3receiveddatawordToTimer2trig





enumerator kINPUTMUX_Lpuart3transmitteddatawordToTimer2trig





enumerator kINPUTMUX_Lpuart3receivelineidleToTimer2trig





enumerator kINPUTMUX_Lpuart4receiveddatawordToTimer2trig





enumerator kINPUTMUX_Lpuart4transmitteddatawordToTimer2trig





enumerator kINPUTMUX_Lpuart4receivelineidleToTimer2trig





enumerator kINPUTMUX_Adc1tcomp0ToTimer2trig





enumerator kINPUTMUX_Adc1tcomp1ToTimer2trig





enumerator kINPUTMUX_Adc1tcomp2ToTimer2trig





enumerator kINPUTMUX_Adc1tcomp3ToTimer2trig





enumerator kINPUTMUX_Ctimer3mat1ToTimer2trig





enumerator kINPUTMUX_Ctimer3mat2ToTimer2trig





enumerator kINPUTMUX_Ctimer3mat3ToTimer2trig





enumerator kINPUTMUX_Ctimer4mat1ToTimer2trig





enumerator kINPUTMUX_Ctimer4mat2ToTimer2trig





enumerator kINPUTMUX_Ctimer4mat3ToTimer2trig





enumerator kINPUTMUX_Lpi2c2masterendofpacketToTimer2trig





enumerator kINPUTMUX_Lpi2c2slaveendofpacketToTimer2trig





enumerator kINPUTMUX_Lpi2c3masterendofpacketToTimer2trig





enumerator kINPUTMUX_Lpi2c3slaveendofpacketToTimer2trig





enumerator kINPUTMUX_Lpuart5receiveddatawordToTimer2trig





enumerator kINPUTMUX_Lpuart5transmitteddatawordToTimer2trig





enumerator kINPUTMUX_Lpuart5receivelineidleToTimer2trig





enumerator kINPUTMUX_Trigin0ToTimer2trig





enumerator kINPUTMUX_Trigin1ToTimer2trig





enumerator kINPUTMUX_Trigin2ToTimer2trig





enumerator kINPUTMUX_Trigin3ToTimer2trig





enumerator kINPUTMUX_Trigin4ToTimer2trig





enumerator kINPUTMUX_Trigin5ToTimer2trig





enumerator kINPUTMUX_Trigin6ToTimer2trig





enumerator kINPUTMUX_Trigin7ToTimer2trig





enumerator kINPUTMUX_Trigin8ToTimer2trig





enumerator kINPUTMUX_Trigin9ToTimer2trig





enumerator kINPUTMUX_Trigin10ToTimer2trig





enumerator kINPUTMUX_Trigin11ToTimer2trig





enumerator kINPUTMUX_Usb1startofframeToTimer2trig





enumerator kINPUTMUX_Lpspi2endofframeToTimer2trig





enumerator kINPUTMUX_Lpspi2receiveddatawordToTimer2trig





enumerator kINPUTMUX_Lpspi3endofframeToTimer2trig





enumerator kINPUTMUX_Lpspi3receiveddatawordToTimer2trig





enumerator kINPUTMUX_Lpspi4endofframeToTimer2trig





enumerator kINPUTMUX_Lpspi4receiveddatawordToTimer2trig





enumerator kINPUTMUX_Lpspi5endofframeToTimer2trig





enumerator kINPUTMUX_Lpspi5receiveddatawordToTimer2trig





enumerator kINPUTMUX_Ctinp0ToTimer3trig





enumerator kINPUTMUX_Ctinp1ToTimer3trig





enumerator kINPUTMUX_Ctinp2ToTimer3trig





enumerator kINPUTMUX_Ctinp3ToTimer3trig





enumerator kINPUTMUX_Ctinp4ToTimer3trig





enumerator kINPUTMUX_Ctinp5ToTimer3trig





enumerator kINPUTMUX_Ctinp6ToTimer3trig





enumerator kINPUTMUX_Ctinp7ToTimer3trig





enumerator kINPUTMUX_Ctinp8ToTimer3trig





enumerator kINPUTMUX_Ctinp9ToTimer3trig





enumerator kINPUTMUX_Ctinp10ToTimer3trig





enumerator kINPUTMUX_Ctinp11ToTimer3trig





enumerator kINPUTMUX_Ctinp12ToTimer3trig





enumerator kINPUTMUX_Ctinp13ToTimer3trig





enumerator kINPUTMUX_Ctinp14ToTimer3trig





enumerator kINPUTMUX_Ctinp15ToTimer3trig





enumerator kINPUTMUX_Ctinp16ToTimer3trig





enumerator kINPUTMUX_Ctinp17ToTimer3trig





enumerator kINPUTMUX_Ctinp18ToTimer3trig





enumerator kINPUTMUX_Ctinp19ToTimer3trig





enumerator kINPUTMUX_Aoi0out0ToTimer3trig





enumerator kINPUTMUX_Aoi0out1ToTimer3trig





enumerator kINPUTMUX_Aoi0out2ToTimer3trig





enumerator kINPUTMUX_Aoi0out3ToTimer3trig





enumerator kINPUTMUX_Adc0tcomp0ToTimer3trig





enumerator kINPUTMUX_Adc0tcomp1ToTimer3trig





enumerator kINPUTMUX_Adc0tcomp2ToTimer3trig





enumerator kINPUTMUX_Adc0tcomp3ToTimer3trig





enumerator kINPUTMUX_Cmp0outToTimer3trig





enumerator kINPUTMUX_Ctimer0mat1ToTimer3trig





enumerator kINPUTMUX_Ctimer0mat2ToTimer3trig





enumerator kINPUTMUX_Ctimer0mat3ToTimer3trig





enumerator kINPUTMUX_Ctimer1mat1ToTimer3trig





enumerator kINPUTMUX_Ctimer1mat2ToTimer3trig





enumerator kINPUTMUX_Ctimer1mat3ToTimer3trig





enumerator kINPUTMUX_Lpi2c0masterendofpacketToTimer3trig





enumerator kINPUTMUX_Lpi2c0slaveendofpacketToTimer3trig





enumerator kINPUTMUX_Lpi2c1masterendofpacketToTimer3trig





enumerator kINPUTMUX_Lpi2c1slaveendofpacketToTimer3trig





enumerator kINPUTMUX_Lpspi0endofframeToTimer3trig





enumerator kINPUTMUX_Lpspi0receiveddatawordToTimer3trig





enumerator kINPUTMUX_Lpspi1endofframeToTimer3trig





enumerator kINPUTMUX_Lpspi1receiveddatawordToTimer3trig





enumerator kINPUTMUX_Lpuart0receiveddatawordToTimer3trig





enumerator kINPUTMUX_Lpuart0transmitteddatawordToTimer3trig





enumerator kINPUTMUX_Lpuart0receivelineidleToTimer3trig





enumerator kINPUTMUX_Lpuart1receiveddatawordToTimer3trig





enumerator kINPUTMUX_Lpuart1transmitteddatawordToTimer3trig





enumerator kINPUTMUX_Lpuart1receivelineidleToTimer3trig





enumerator kINPUTMUX_Lpuart2receiveddatawordToTimer3trig





enumerator kINPUTMUX_Lpuart2transmitteddatawordToTimer3trig





enumerator kINPUTMUX_Lpuart2receivelineidleToTimer3trig





enumerator kINPUTMUX_Lpuart3receiveddatawordToTimer3trig





enumerator kINPUTMUX_Lpuart3transmitteddatawordToTimer3trig





enumerator kINPUTMUX_Lpuart3receivelineidleToTimer3trig





enumerator kINPUTMUX_Lpuart4receiveddatawordToTimer3trig





enumerator kINPUTMUX_Lpuart4transmitteddatawordToTimer3trig





enumerator kINPUTMUX_Lpuart4receivelineidleToTimer3trig





enumerator kINPUTMUX_Adc1tcomp0ToTimer3trig





enumerator kINPUTMUX_Adc1tcomp1ToTimer3trig





enumerator kINPUTMUX_Adc1tcomp2ToTimer3trig





enumerator kINPUTMUX_Adc1tcomp3ToTimer3trig





enumerator kINPUTMUX_Ctimer2mat1ToTimer3trig





enumerator kINPUTMUX_Ctimer2mat2ToTimer3trig





enumerator kINPUTMUX_Ctimer2mat3ToTimer3trig





enumerator kINPUTMUX_Ctimer4mat1ToTimer3trig





enumerator kINPUTMUX_Ctimer4mat2ToTimer3trig





enumerator kINPUTMUX_Ctimer4mat3ToTimer3trig





enumerator kINPUTMUX_Lpi2c2masterendofpacketToTimer3trig





enumerator kINPUTMUX_Lpi2c2slaveendofpacketToTimer3trig





enumerator kINPUTMUX_Lpi2c3masterendofpacketToTimer3trig





enumerator kINPUTMUX_Lpi2c3slaveendofpacketToTimer3trig





enumerator kINPUTMUX_Lpuart5receiveddatawordToTimer3trig





enumerator kINPUTMUX_Lpuart5transmitteddatawordToTimer3trig





enumerator kINPUTMUX_Lpuart5receivelineidleToTimer3trig





enumerator kINPUTMUX_Tmprout0ToTimer3trig





enumerator kINPUTMUX_Tmprout1ToTimer3trig





enumerator kINPUTMUX_Trigin0ToTimer3trig





enumerator kINPUTMUX_Trigin1ToTimer3trig





enumerator kINPUTMUX_Trigin2ToTimer3trig





enumerator kINPUTMUX_Trigin3ToTimer3trig





enumerator kINPUTMUX_Trigin4ToTimer3trig





enumerator kINPUTMUX_Trigin5ToTimer3trig





enumerator kINPUTMUX_Trigin6ToTimer3trig





enumerator kINPUTMUX_Trigin7ToTimer3trig





enumerator kINPUTMUX_Trigin8ToTimer3trig





enumerator kINPUTMUX_Trigin9ToTimer3trig





enumerator kINPUTMUX_Trigin10ToTimer3trig





enumerator kINPUTMUX_Trigin11ToTimer3trig





enumerator kINPUTMUX_Usb1startofframeToTimer3trig





enumerator kINPUTMUX_Lpspi2endofframeToTimer3trig





enumerator kINPUTMUX_Lpspi2receiveddatawordToTimer3trig





enumerator kINPUTMUX_Lpspi3endofframeToTimer3trig





enumerator kINPUTMUX_Lpspi3receiveddatawordToTimer3trig





enumerator kINPUTMUX_Lpspi4endofframeToTimer3trig





enumerator kINPUTMUX_Lpspi4receiveddatawordToTimer3trig





enumerator kINPUTMUX_Lpspi5endofframeToTimer3trig





enumerator kINPUTMUX_Lpspi5receiveddatawordToTimer3trig





enumerator kINPUTMUX_Ctinp0ToTimer4trig





enumerator kINPUTMUX_Ctinp1ToTimer4trig





enumerator kINPUTMUX_Ctinp2ToTimer4trig





enumerator kINPUTMUX_Ctinp3ToTimer4trig





enumerator kINPUTMUX_Ctinp4ToTimer4trig





enumerator kINPUTMUX_Ctinp5ToTimer4trig





enumerator kINPUTMUX_Ctinp6ToTimer4trig





enumerator kINPUTMUX_Ctinp7ToTimer4trig





enumerator kINPUTMUX_Ctinp8ToTimer4trig





enumerator kINPUTMUX_Ctinp9ToTimer4trig





enumerator kINPUTMUX_Ctinp10ToTimer4trig





enumerator kINPUTMUX_Ctinp11ToTimer4trig





enumerator kINPUTMUX_Ctinp12ToTimer4trig





enumerator kINPUTMUX_Ctinp13ToTimer4trig





enumerator kINPUTMUX_Ctinp14ToTimer4trig





enumerator kINPUTMUX_Ctinp15ToTimer4trig





enumerator kINPUTMUX_Ctinp16ToTimer4trig





enumerator kINPUTMUX_Ctinp17ToTimer4trig





enumerator kINPUTMUX_Ctinp18ToTimer4trig





enumerator kINPUTMUX_Ctinp19ToTimer4trig





enumerator kINPUTMUX_Aoi0out0ToTimer4trig





enumerator kINPUTMUX_Aoi0out1ToTimer4trig





enumerator kINPUTMUX_Aoi0out2ToTimer4trig





enumerator kINPUTMUX_Aoi0out3ToTimer4trig





enumerator kINPUTMUX_Adc0tcomp0ToTimer4trig





enumerator kINPUTMUX_Adc0tcomp1ToTimer4trig





enumerator kINPUTMUX_Adc0tcomp2ToTimer4trig





enumerator kINPUTMUX_Adc0tcomp3ToTimer4trig





enumerator kINPUTMUX_Cmp0outToTimer4trig





enumerator kINPUTMUX_Ctimer0mat1ToTimer4trig





enumerator kINPUTMUX_Ctimer0mat2ToTimer4trig





enumerator kINPUTMUX_Ctimer0mat3ToTimer4trig





enumerator kINPUTMUX_Ctimer1mat1ToTimer4trig





enumerator kINPUTMUX_Ctimer1mat2ToTimer4trig





enumerator kINPUTMUX_Ctimer1mat3ToTimer4trig





enumerator kINPUTMUX_Lpi2c0masterendofpacketToTimer4trig





enumerator kINPUTMUX_Lpi2c0slaveendofpacketToTimer4trig





enumerator kINPUTMUX_Lpi2c1masterendofpacketToTimer4trig





enumerator kINPUTMUX_Lpi2c1slaveendofpacketToTimer4trig





enumerator kINPUTMUX_Lpspi0endofframeToTimer4trig





enumerator kINPUTMUX_Lpspi0receiveddatawordToTimer4trig





enumerator kINPUTMUX_Lpspi1endofframeToTimer4trig





enumerator kINPUTMUX_Lpspi1receiveddatawordToTimer4trig





enumerator kINPUTMUX_Lpuart0receiveddatawordToTimer4trig





enumerator kINPUTMUX_Lpuart0transmitteddatawordToTimer4trig





enumerator kINPUTMUX_Lpuart0receivelineidleToTimer4trig





enumerator kINPUTMUX_Lpuart1receiveddatawordToTimer4trig





enumerator kINPUTMUX_Lpuart1transmitteddatawordToTimer4trig





enumerator kINPUTMUX_Lpuart1receivelineidleToTimer4trig





enumerator kINPUTMUX_Lpuart2receiveddatawordToTimer4trig





enumerator kINPUTMUX_Lpuart2transmitteddatawordToTimer4trig





enumerator kINPUTMUX_Lpuart2receivelineidleToTimer4trig





enumerator kINPUTMUX_Lpuart3receiveddatawordToTimer4trig





enumerator kINPUTMUX_Lpuart3transmitteddatawordToTimer4trig





enumerator kINPUTMUX_Lpuart3receivelineidleToTimer4trig





enumerator kINPUTMUX_Lpuart4receiveddatawordToTimer4trig





enumerator kINPUTMUX_Lpuart4transmitteddatawordToTimer4trig





enumerator kINPUTMUX_Lpuart4receivelineidleToTimer4trig





enumerator kINPUTMUX_Adc1tcomp0ToTimer4trig





enumerator kINPUTMUX_Adc1tcomp1ToTimer4trig





enumerator kINPUTMUX_Adc1tcomp2ToTimer4trig





enumerator kINPUTMUX_Adc1tcomp3ToTimer4trig





enumerator kINPUTMUX_Ctimer2mat1ToTimer4trig





enumerator kINPUTMUX_Ctimer2mat2ToTimer4trig





enumerator kINPUTMUX_Ctimer2mat3ToTimer4trig





enumerator kINPUTMUX_Ctimer3mat1ToTimer4trig





enumerator kINPUTMUX_Ctimer3mat2ToTimer4trig





enumerator kINPUTMUX_Ctimer3mat3ToTimer4trig





enumerator kINPUTMUX_Lpi2c2masterendofpacketToTimer4trig





enumerator kINPUTMUX_Lpi2c2slaveendofpacketToTimer4trig





enumerator kINPUTMUX_Lpi2c3masterendofpacketToTimer4trig





enumerator kINPUTMUX_Lpi2c3slaveendofpacketToTimer4trig





enumerator kINPUTMUX_Lpuart5receiveddatawordToTimer4trig





enumerator kINPUTMUX_Lpuart5transmitteddatawordToTimer4trig





enumerator kINPUTMUX_Lpuart5receivelineidleToTimer4trig





enumerator kINPUTMUX_Trigin0ToTimer4trig





enumerator kINPUTMUX_Trigin1ToTimer4trig





enumerator kINPUTMUX_Trigin2ToTimer4trig





enumerator kINPUTMUX_Trigin3ToTimer4trig





enumerator kINPUTMUX_Trigin4ToTimer4trig





enumerator kINPUTMUX_Trigin5ToTimer4trig





enumerator kINPUTMUX_Trigin6ToTimer4trig





enumerator kINPUTMUX_Trigin7ToTimer4trig





enumerator kINPUTMUX_Trigin8ToTimer4trig





enumerator kINPUTMUX_Trigin9ToTimer4trig





enumerator kINPUTMUX_Trigin10ToTimer4trig





enumerator kINPUTMUX_Trigin11ToTimer4trig





enumerator kINPUTMUX_Usb1startofframeToTimer4trig





enumerator kINPUTMUX_Lpspi2endofframeToTimer4trig





enumerator kINPUTMUX_Lpspi2receiveddatawordToTimer4trig





enumerator kINPUTMUX_Lpspi3endofframeToTimer4trig





enumerator kINPUTMUX_Lpspi3receiveddatawordToTimer4trig





enumerator kINPUTMUX_Lpspi4endofframeToTimer4trig





enumerator kINPUTMUX_Lpspi4receiveddatawordToTimer4trig





enumerator kINPUTMUX_Lpspi5endofframeToTimer4trig





enumerator kINPUTMUX_Lpspi5receiveddatawordToTimer4trig





enumerator kINPUTMUX_ClkinToFreqmeasref





enumerator kINPUTMUX_Froosc12mToFreqmeasref





enumerator kINPUTMUX_FrohfdivToFreqmeasref





enumerator kINPUTMUX_Osc32k1ToFreqmeasref





enumerator kINPUTMUX_Clk16k1ToFreqmeasref





enumerator kINPUTMUX_SlowclkToFreqmeasref





enumerator kINPUTMUX_Freqmeclkin0ToFreqmeasref





enumerator kINPUTMUX_Freqmeclkin1ToFreqmeasref





enumerator kINPUTMUX_Aoi0out0ToFreqmeasref





enumerator kINPUTMUX_Aoi0out1ToFreqmeasref





enumerator kINPUTMUX_ClkoutpinToFreqmeasref





enumerator kINPUTMUX_MtrbistheardbeatToFreqmeasref





enumerator kINPUTMUX_SpcbgaprefreshrateinlpmodeToFreqmeasref





enumerator kINPUTMUX_SpctimerclockToFreqmeasref





enumerator kINPUTMUX_Spctestobservesfabit0ToFreqmeasref





enumerator kINPUTMUX_SpcpmcobstestdelayxorToFreqmeasref





enumerator kINPUTMUX_Usbpll480mclockdivby20ToFreqmeasref





enumerator kINPUTMUX_Vbatosc32ktesttriggerToFreqmeasref





enumerator kINPUTMUX_Vbatosc32ktestclockToFreqmeasref





enumerator kINPUTMUX_Pll1clkdivToFreqmeasref





enumerator kINPUTMUX_Gdet0onecyclepulseforerrorsdetectedbydet1ToFreqmeasref





enumerator kINPUTMUX_Gdet0onecycleblindingpulseattrimchangeToFreqmeasref





enumerator kINPUTMUX_TsiclkmainlvToFreqmeasref





enumerator kINPUTMUX_TsiclkswlvToFreqmeasref





enumerator kINPUTMUX_TsiintgdonelvToFreqmeasref





enumerator kINPUTMUX_TsiintgresetlvToFreqmeasref





enumerator kINPUTMUX_ClkinToFreqmeastar





enumerator kINPUTMUX_Froosc12mToFreqmeastar





enumerator kINPUTMUX_FrohfdivToFreqmeastar





enumerator kINPUTMUX_Osc32k1ToFreqmeastar





enumerator kINPUTMUX_Clk16k1ToFreqmeastar





enumerator kINPUTMUX_SlowclkToFreqmeastar





enumerator kINPUTMUX_Freqmeclkin0ToFreqmeastar





enumerator kINPUTMUX_Freqmeclkin1ToFreqmeastar





enumerator kINPUTMUX_Aoi0out0ToFreqmeastar





enumerator kINPUTMUX_Aoi0out1ToFreqmeastar





enumerator kINPUTMUX_ClkoutpinToFreqmeastar





enumerator kINPUTMUX_MtrbistheardbeatToFreqmeastar





enumerator kINPUTMUX_SpcbgaprefreshrateinlpmodeToFreqmeastar





enumerator kINPUTMUX_SpctimerclockToFreqmeastar





enumerator kINPUTMUX_Spctestobservesfabit0ToFreqmeastar





enumerator kINPUTMUX_SpcpmcobstestdelayxorToFreqmeastar





enumerator kINPUTMUX_Usbpll480mclockdivby20ToFreqmeastar





enumerator kINPUTMUX_Vbatosc32ktesttriggerToFreqmeastar





enumerator kINPUTMUX_Vbatosc32ktestclockToFreqmeastar





enumerator kINPUTMUX_Pll1clkdivToFreqmeastar





enumerator kINPUTMUX_Gdet0onecyclepulseforerrorsdetectedbydet1ToFreqmeastar





enumerator kINPUTMUX_Gdet0onecycleblindingpulseattrimchangeToFreqmeastar





enumerator kINPUTMUX_TsiclkmainlvToFreqmeastar





enumerator kINPUTMUX_TsiclkswlvToFreqmeastar





enumerator kINPUTMUX_TsiintgdonelvToFreqmeastar





enumerator kINPUTMUX_TsiintgresetlvToFreqmeastar





enumerator kINPUTMUX_Aoi0out0ToCmp0trig





enumerator kINPUTMUX_Aoi0out1ToCmp0trig





enumerator kINPUTMUX_Aoi0out2ToCmp0trig





enumerator kINPUTMUX_Aoi0out3ToCmp0trig





enumerator kINPUTMUX_Ctimer0mat0ToCmp0trig





enumerator kINPUTMUX_Ctimer0mat2ToCmp0trig





enumerator kINPUTMUX_Ctimer1mat0ToCmp0trig





enumerator kINPUTMUX_Ctimer1mat2ToCmp0trig





enumerator kINPUTMUX_Ctimer2mat0ToCmp0trig





enumerator kINPUTMUX_Ctimer2mat2ToCmp0trig





enumerator kINPUTMUX_Lptmr0ToCmp0trig





enumerator kINPUTMUX_Gpio0pineventtrig0ToCmp0trig





enumerator kINPUTMUX_Gpio1pineventtrig0ToCmp0trig





enumerator kINPUTMUX_Gpio2pineventtrig0ToCmp0trig





enumerator kINPUTMUX_Gpio3pineventtrig0ToCmp0trig





enumerator kINPUTMUX_Gpio4pineventtrig0ToCmp0trig





enumerator kINPUTMUX_WuuToCmp0trig





enumerator kINPUTMUX_Ctimer3mat0ToCmp0trig





enumerator kINPUTMUX_Ctimer3mat1ToCmp0trig





enumerator kINPUTMUX_Ctimer4mat0ToCmp0trig





enumerator kINPUTMUX_Ctimer4mat1ToCmp0trig





enumerator kINPUTMUX_Gpio0pineventtrig1ToCmp0trig





enumerator kINPUTMUX_Gpio1pineventtrig1ToCmp0trig





enumerator kINPUTMUX_Gpio2pineventtrig1ToCmp0trig





enumerator kINPUTMUX_Gpio3pineventtrig1ToCmp0trig





enumerator kINPUTMUX_Gpio4pineventtrig1ToCmp0trig





enumerator kINPUTMUX_ArmtxevToAdc0trig





enumerator kINPUTMUX_Aoi0out0ToAdc0trig





enumerator kINPUTMUX_Aoi0out1ToAdc0trig





enumerator kINPUTMUX_Aoi0out2ToAdc0trig





enumerator kINPUTMUX_Aoi0out3ToAdc0trig





enumerator kINPUTMUX_Cmp0outToAdc0trig





enumerator kINPUTMUX_Ctimer0mat0ToAdc0trig





enumerator kINPUTMUX_Ctimer0mat1ToAdc0trig





enumerator kINPUTMUX_Ctimer1mat0ToAdc0trig





enumerator kINPUTMUX_Ctimer1mat1ToAdc0trig





enumerator kINPUTMUX_Ctimer2mat0ToAdc0trig





enumerator kINPUTMUX_Ctimer2mat1ToAdc0trig





enumerator kINPUTMUX_Lptmr0ToAdc0trig





enumerator kINPUTMUX_Gpio0pineventtrig0ToAdc0trig





enumerator kINPUTMUX_Gpio1pineventtrig0ToAdc0trig





enumerator kINPUTMUX_Gpio2pineventtrig0ToAdc0trig





enumerator kINPUTMUX_Gpio3pineventtrig0ToAdc0trig





enumerator kINPUTMUX_Gpio4pineventtrig0ToAdc0trig





enumerator kINPUTMUX_WuuToAdc0trig





enumerator kINPUTMUX_Adc1tcomp0ToAdc0trig





enumerator kINPUTMUX_Adc1tcomp1ToAdc0trig





enumerator kINPUTMUX_Adc1tcomp2ToAdc0trig





enumerator kINPUTMUX_Adc1tcomp3ToAdc0trig





enumerator kINPUTMUX_Ctimer3mat0ToAdc0trig





enumerator kINPUTMUX_Ctimer3mat1ToAdc0trig





enumerator kINPUTMUX_Ctimer4mat0ToAdc0trig





enumerator kINPUTMUX_Ctimer4mat1ToAdc0trig





enumerator kINPUTMUX_Flexio0ch0ToAdc0trig





enumerator kINPUTMUX_Flexio0ch1ToAdc0trig





enumerator kINPUTMUX_Flexio0ch2ToAdc0trig





enumerator kINPUTMUX_Flexio0ch3ToAdc0trig





enumerator kINPUTMUX_Gpio0pineventtrig1ToAdc0trig





enumerator kINPUTMUX_Gpio1pineventtrig1ToAdc0trig





enumerator kINPUTMUX_Gpio2pineventtrig1ToAdc0trig





enumerator kINPUTMUX_Gpio3pineventtrig1ToAdc0trig





enumerator kINPUTMUX_Gpio4pineventtrig1ToAdc0trig





enumerator kINPUTMUX_ArmtxevToAdc1trig





enumerator kINPUTMUX_Aoi0out0ToAdc1trig





enumerator kINPUTMUX_Aoi0out1ToAdc1trig





enumerator kINPUTMUX_Aoi0out2ToAdc1trig





enumerator kINPUTMUX_Aoi0out3ToAdc1trig





enumerator kINPUTMUX_Cmp0outToAdc1trig





enumerator kINPUTMUX_Ctimer0mat0ToAdc1trig





enumerator kINPUTMUX_Ctimer0mat1ToAdc1trig





enumerator kINPUTMUX_Ctimer1mat0ToAdc1trig





enumerator kINPUTMUX_Ctimer1mat1ToAdc1trig





enumerator kINPUTMUX_Ctimer2mat0ToAdc1trig





enumerator kINPUTMUX_Ctimer2mat1ToAdc1trig





enumerator kINPUTMUX_Lptmr0ToAdc1trig





enumerator kINPUTMUX_Gpio0pineventtrig0ToAdc1trig





enumerator kINPUTMUX_Gpio1pineventtrig0ToAdc1trig





enumerator kINPUTMUX_Gpio2pineventtrig0ToAdc1trig





enumerator kINPUTMUX_Gpio3pineventtrig0ToAdc1trig





enumerator kINPUTMUX_Gpio4pineventtrig0ToAdc1trig





enumerator kINPUTMUX_WuuToAdc1trig





enumerator kINPUTMUX_Adc0tcomp0ToAdc1trig





enumerator kINPUTMUX_Adc0tcomp1ToAdc1trig





enumerator kINPUTMUX_Adc0tcomp2ToAdc1trig





enumerator kINPUTMUX_Adc0tcomp3ToAdc1trig





enumerator kINPUTMUX_Ctimer3mat0ToAdc1trig





enumerator kINPUTMUX_Ctimer3mat1ToAdc1trig





enumerator kINPUTMUX_Ctimer4mat0ToAdc1trig





enumerator kINPUTMUX_Ctimer4mat1ToAdc1trig





enumerator kINPUTMUX_Flexio0ch0ToAdc1trig





enumerator kINPUTMUX_Flexio0ch1ToAdc1trig





enumerator kINPUTMUX_Flexio0ch2ToAdc1trig





enumerator kINPUTMUX_Flexio0ch3ToAdc1trig





enumerator kINPUTMUX_Gpio0pineventtrig1ToAdc1trig





enumerator kINPUTMUX_Gpio1pineventtrig1ToAdc1trig





enumerator kINPUTMUX_Gpio2pineventtrig1ToAdc1trig





enumerator kINPUTMUX_Gpio3pineventtrig1ToAdc1trig





enumerator kINPUTMUX_Gpio4pineventtrig1ToAdc1trig





enumerator kINPUTMUX_Adc0tcomp0ToAoi0input





enumerator kINPUTMUX_Adc0tcomp1ToAoi0input





enumerator kINPUTMUX_Adc0tcomp2ToAoi0input





enumerator kINPUTMUX_Adc0tcomp3ToAoi0input





enumerator kINPUTMUX_Cmp0outToAoi0input





enumerator kINPUTMUX_Ctimer0mat0ToAoi0input





enumerator kINPUTMUX_Ctimer0mat1ToAoi0input





enumerator kINPUTMUX_Ctimer0mat2ToAoi0input





enumerator kINPUTMUX_Ctimer0mat3ToAoi0input





enumerator kINPUTMUX_Ctimer1mat0ToAoi0input





enumerator kINPUTMUX_Ctimer1mat1ToAoi0input





enumerator kINPUTMUX_Ctimer1mat2ToAoi0input





enumerator kINPUTMUX_Ctimer1mat3ToAoi0input





enumerator kINPUTMUX_Ctimer2mat0ToAoi0input





enumerator kINPUTMUX_Ctimer2mat1ToAoi0input





enumerator kINPUTMUX_Ctimer2mat2ToAoi0input





enumerator kINPUTMUX_Ctimer2mat3ToAoi0input





enumerator kINPUTMUX_Lptmr0ToAoi0input





enumerator kINPUTMUX_Trigin0ToAoi0input





enumerator kINPUTMUX_Trigin1ToAoi0input





enumerator kINPUTMUX_Trigin2ToAoi0input





enumerator kINPUTMUX_Trigin3ToAoi0input





enumerator kINPUTMUX_Trigin4ToAoi0input





enumerator kINPUTMUX_Trigin5ToAoi0input





enumerator kINPUTMUX_Trigin6ToAoi0input





enumerator kINPUTMUX_Trigin7ToAoi0input





enumerator kINPUTMUX_Trigin8ToAoi0input





enumerator kINPUTMUX_Trigin9ToAoi0input





enumerator kINPUTMUX_Trigin10ToAoi0input





enumerator kINPUTMUX_Trigin11ToAoi0input





enumerator kINPUTMUX_Gpio0pineventtrig0ToAoi0input





enumerator kINPUTMUX_Gpio1pineventtrig0ToAoi0input





enumerator kINPUTMUX_Gpio2pineventtrig0ToAoi0input





enumerator kINPUTMUX_Gpio3pineventtrig0ToAoi0input





enumerator kINPUTMUX_Gpio4pineventtrig0ToAoi0input





enumerator kINPUTMUX_Adc1tcomp0ToAoi0input





enumerator kINPUTMUX_Adc1tcomp1ToAoi0input





enumerator kINPUTMUX_Adc1tcomp2ToAoi0input





enumerator kINPUTMUX_Adc1tcomp3ToAoi0input





enumerator kINPUTMUX_Ctimer3mat0ToAoi0input





enumerator kINPUTMUX_Ctimer3mat1ToAoi0input





enumerator kINPUTMUX_Ctimer3mat2ToAoi0input





enumerator kINPUTMUX_Ctimer3mat3ToAoi0input





enumerator kINPUTMUX_Ctimer4mat0ToAoi0input





enumerator kINPUTMUX_Ctimer4mat1ToAoi0input





enumerator kINPUTMUX_Ctimer4mat2ToAoi0input





enumerator kINPUTMUX_Ctimer4mat3ToAoi0input





enumerator kINPUTMUX_Flexio0ch0ToAoi0input





enumerator kINPUTMUX_Flexio0ch1ToAoi0input





enumerator kINPUTMUX_Flexio0ch2ToAoi0input





enumerator kINPUTMUX_Flexio0ch3ToAoi0input





enumerator kINPUTMUX_Gpio0pineventtrig1ToAoi0input





enumerator kINPUTMUX_Gpio1pineventtrig1ToAoi0input





enumerator kINPUTMUX_Gpio2pineventtrig1ToAoi0input





enumerator kINPUTMUX_Gpio3pineventtrig1ToAoi0input





enumerator kINPUTMUX_Gpio4pineventtrig1ToAoi0input





enumerator kINPUTMUX_Aoi0out0ToLpi2c0trig





enumerator kINPUTMUX_Aoi0out1ToLpi2c0trig





enumerator kINPUTMUX_Aoi0out2ToLpi2c0trig





enumerator kINPUTMUX_Aoi0out3ToLpi2c0trig





enumerator kINPUTMUX_Cmp0outToLpi2c0trig





enumerator kINPUTMUX_Ctimer0mat0ToLpi2c0trig





enumerator kINPUTMUX_Ctimer0mat1ToLpi2c0trig





enumerator kINPUTMUX_Ctimer1mat0ToLpi2c0trig





enumerator kINPUTMUX_Ctimer1mat1ToLpi2c0trig





enumerator kINPUTMUX_Ctimer2mat0ToLpi2c0trig





enumerator kINPUTMUX_Ctimer2mat1ToLpi2c0trig





enumerator kINPUTMUX_Lptmr0ToLpi2c0trig





enumerator kINPUTMUX_Trigin0ToLpi2c0trig





enumerator kINPUTMUX_Trigin1ToLpi2c0trig





enumerator kINPUTMUX_Trigin2ToLpi2c0trig





enumerator kINPUTMUX_Trigin3ToLpi2c0trig





enumerator kINPUTMUX_Trigin4ToLpi2c0trig





enumerator kINPUTMUX_Trigin5ToLpi2c0trig





enumerator kINPUTMUX_Trigin6ToLpi2c0trig





enumerator kINPUTMUX_Trigin7ToLpi2c0trig





enumerator kINPUTMUX_Gpio0pineventtrig0ToLpi2c0trig





enumerator kINPUTMUX_Gpio1pineventtrig0ToLpi2c0trig





enumerator kINPUTMUX_Gpio2pineventtrig0ToLpi2c0trig





enumerator kINPUTMUX_Gpio3pineventtrig0ToLpi2c0trig





enumerator kINPUTMUX_Gpio4pineventtrig0ToLpi2c0trig





enumerator kINPUTMUX_WuuToLpi2c0trig





enumerator kINPUTMUX_Ctimer3mat2ToLpi2c0trig





enumerator kINPUTMUX_Ctimer3mat3ToLpi2c0trig





enumerator kINPUTMUX_Ctimer4mat2ToLpi2c0trig





enumerator kINPUTMUX_Ctimer4mat3ToLpi2c0trig





enumerator kINPUTMUX_Flexio0ch0ToLpi2c0trig





enumerator kINPUTMUX_Flexio0ch1ToLpi2c0trig





enumerator kINPUTMUX_Flexio0ch2ToLpi2c0trig





enumerator kINPUTMUX_Flexio0ch3ToLpi2c0trig





enumerator kINPUTMUX_Gpio0pineventtrig1ToLpi2c0trig





enumerator kINPUTMUX_Gpio1pineventtrig1ToLpi2c0trig





enumerator kINPUTMUX_Gpio2pineventtrig1ToLpi2c0trig





enumerator kINPUTMUX_Gpio3pineventtrig1ToLpi2c0trig





enumerator kINPUTMUX_Gpio4pineventtrig1ToLpi2c0trig





enumerator kINPUTMUX_Aoi0out0ToLpi2c1trig





enumerator kINPUTMUX_Aoi0out1ToLpi2c1trig





enumerator kINPUTMUX_Aoi0out2ToLpi2c1trig





enumerator kINPUTMUX_Aoi0out3ToLpi2c1trig





enumerator kINPUTMUX_Cmp0outToLpi2c1trig





enumerator kINPUTMUX_Ctimer0mat0ToLpi2c1trig





enumerator kINPUTMUX_Ctimer0mat1ToLpi2c1trig





enumerator kINPUTMUX_Ctimer1mat0ToLpi2c1trig





enumerator kINPUTMUX_Ctimer1mat1ToLpi2c1trig





enumerator kINPUTMUX_Ctimer2mat0ToLpi2c1trig





enumerator kINPUTMUX_Ctimer2mat1ToLpi2c1trig





enumerator kINPUTMUX_Lptmr0ToLpi2c1trig





enumerator kINPUTMUX_Trigin0ToLpi2c1trig





enumerator kINPUTMUX_Trigin1ToLpi2c1trig





enumerator kINPUTMUX_Trigin2ToLpi2c1trig





enumerator kINPUTMUX_Trigin3ToLpi2c1trig





enumerator kINPUTMUX_Trigin4ToLpi2c1trig





enumerator kINPUTMUX_Trigin5ToLpi2c1trig





enumerator kINPUTMUX_Trigin6ToLpi2c1trig





enumerator kINPUTMUX_Trigin7ToLpi2c1trig





enumerator kINPUTMUX_Gpio0pineventtrig0ToLpi2c1trig





enumerator kINPUTMUX_Gpio1pineventtrig0ToLpi2c1trig





enumerator kINPUTMUX_Gpio2pineventtrig0ToLpi2c1trig





enumerator kINPUTMUX_Gpio3pineventtrig0ToLpi2c1trig





enumerator kINPUTMUX_Gpio4pineventtrig0ToLpi2c1trig





enumerator kINPUTMUX_WuuToLpi2c1trig





enumerator kINPUTMUX_Ctimer3mat2ToLpi2c1trig





enumerator kINPUTMUX_Ctimer3mat3ToLpi2c1trig





enumerator kINPUTMUX_Ctimer4mat2ToLpi2c1trig





enumerator kINPUTMUX_Ctimer4mat3ToLpi2c1trig





enumerator kINPUTMUX_Flexio0ch0ToLpi2c1trig





enumerator kINPUTMUX_Flexio0ch1ToLpi2c1trig





enumerator kINPUTMUX_Flexio0ch2ToLpi2c1trig





enumerator kINPUTMUX_Flexio0ch3ToLpi2c1trig





enumerator kINPUTMUX_Gpio0pineventtrig1ToLpi2c1trig





enumerator kINPUTMUX_Gpio1pineventtrig1ToLpi2c1trig





enumerator kINPUTMUX_Gpio2pineventtrig1ToLpi2c1trig





enumerator kINPUTMUX_Gpio3pineventtrig1ToLpi2c1trig





enumerator kINPUTMUX_Gpio4pineventtrig1ToLpi2c1trig





enumerator kINPUTMUX_Aoi0out0ToLpi2c2trig





enumerator kINPUTMUX_Aoi0out1ToLpi2c2trig





enumerator kINPUTMUX_Aoi0out2ToLpi2c2trig





enumerator kINPUTMUX_Aoi0out3ToLpi2c2trig





enumerator kINPUTMUX_Cmp0outToLpi2c2trig





enumerator kINPUTMUX_Ctimer0mat0ToLpi2c2trig





enumerator kINPUTMUX_Ctimer0mat1ToLpi2c2trig





enumerator kINPUTMUX_Ctimer1mat0ToLpi2c2trig





enumerator kINPUTMUX_Ctimer1mat1ToLpi2c2trig





enumerator kINPUTMUX_Ctimer2mat0ToLpi2c2trig





enumerator kINPUTMUX_Ctimer2mat1ToLpi2c2trig





enumerator kINPUTMUX_Lptmr0ToLpi2c2trig





enumerator kINPUTMUX_Trigin0ToLpi2c2trig





enumerator kINPUTMUX_Trigin1ToLpi2c2trig





enumerator kINPUTMUX_Trigin2ToLpi2c2trig





enumerator kINPUTMUX_Trigin3ToLpi2c2trig





enumerator kINPUTMUX_Trigin4ToLpi2c2trig





enumerator kINPUTMUX_Trigin5ToLpi2c2trig





enumerator kINPUTMUX_Trigin6ToLpi2c2trig





enumerator kINPUTMUX_Trigin7ToLpi2c2trig





enumerator kINPUTMUX_Gpio0pineventtrig0ToLpi2c2trig





enumerator kINPUTMUX_Gpio1pineventtrig0ToLpi2c2trig





enumerator kINPUTMUX_Gpio2pineventtrig0ToLpi2c2trig





enumerator kINPUTMUX_Gpio3pineventtrig0ToLpi2c2trig





enumerator kINPUTMUX_Gpio4pineventtrig0ToLpi2c2trig





enumerator kINPUTMUX_WuuToLpi2c2trig





enumerator kINPUTMUX_Ctimer3mat2ToLpi2c2trig





enumerator kINPUTMUX_Ctimer3mat3ToLpi2c2trig





enumerator kINPUTMUX_Ctimer4mat2ToLpi2c2trig





enumerator kINPUTMUX_Ctimer4mat3ToLpi2c2trig





enumerator kINPUTMUX_Flexio0ch0ToLpi2c2trig





enumerator kINPUTMUX_Flexio0ch1ToLpi2c2trig





enumerator kINPUTMUX_Flexio0ch2ToLpi2c2trig





enumerator kINPUTMUX_Flexio0ch3ToLpi2c2trig





enumerator kINPUTMUX_Gpio0pineventtrig1ToLpi2c2trig





enumerator kINPUTMUX_Gpio1pineventtrig1ToLpi2c2trig





enumerator kINPUTMUX_Gpio2pineventtrig1ToLpi2c2trig





enumerator kINPUTMUX_Gpio3pineventtrig1ToLpi2c2trig





enumerator kINPUTMUX_Gpio4pineventtrig1ToLpi2c2trig





enumerator kINPUTMUX_Aoi0out0ToLpi2c3trig





enumerator kINPUTMUX_Aoi0out1ToLpi2c3trig





enumerator kINPUTMUX_Aoi0out2ToLpi2c3trig





enumerator kINPUTMUX_Aoi0out3ToLpi2c3trig





enumerator kINPUTMUX_Cmp0outToLpi2c3trig





enumerator kINPUTMUX_Ctimer0mat0ToLpi2c3trig





enumerator kINPUTMUX_Ctimer0mat1ToLpi2c3trig





enumerator kINPUTMUX_Ctimer1mat0ToLpi2c3trig





enumerator kINPUTMUX_Ctimer1mat1ToLpi2c3trig





enumerator kINPUTMUX_Ctimer2mat0ToLpi2c3trig





enumerator kINPUTMUX_Ctimer2mat1ToLpi2c3trig





enumerator kINPUTMUX_Lptmr0ToLpi2c3trig





enumerator kINPUTMUX_Trigin0ToLpi2c3trig





enumerator kINPUTMUX_Trigin1ToLpi2c3trig





enumerator kINPUTMUX_Trigin2ToLpi2c3trig





enumerator kINPUTMUX_Trigin3ToLpi2c3trig





enumerator kINPUTMUX_Trigin4ToLpi2c3trig





enumerator kINPUTMUX_Trigin5ToLpi2c3trig





enumerator kINPUTMUX_Trigin6ToLpi2c3trig





enumerator kINPUTMUX_Trigin7ToLpi2c3trig





enumerator kINPUTMUX_Gpio0pineventtrig0ToLpi2c3trig





enumerator kINPUTMUX_Gpio1pineventtrig0ToLpi2c3trig





enumerator kINPUTMUX_Gpio2pineventtrig0ToLpi2c3trig





enumerator kINPUTMUX_Gpio3pineventtrig0ToLpi2c3trig





enumerator kINPUTMUX_Gpio4pineventtrig0ToLpi2c3trig





enumerator kINPUTMUX_WuuToLpi2c3trig





enumerator kINPUTMUX_Ctimer3mat2ToLpi2c3trig





enumerator kINPUTMUX_Ctimer3mat3ToLpi2c3trig





enumerator kINPUTMUX_Ctimer4mat2ToLpi2c3trig





enumerator kINPUTMUX_Ctimer4mat3ToLpi2c3trig





enumerator kINPUTMUX_Flexio0ch0ToLpi2c3trig





enumerator kINPUTMUX_Flexio0ch1ToLpi2c3trig





enumerator kINPUTMUX_Flexio0ch2ToLpi2c3trig





enumerator kINPUTMUX_Flexio0ch3ToLpi2c3trig





enumerator kINPUTMUX_Gpio0pineventtrig1ToLpi2c3trig





enumerator kINPUTMUX_Gpio1pineventtrig1ToLpi2c3trig





enumerator kINPUTMUX_Gpio2pineventtrig1ToLpi2c3trig





enumerator kINPUTMUX_Gpio3pineventtrig1ToLpi2c3trig





enumerator kINPUTMUX_Gpio4pineventtrig1ToLpi2c3trig





enumerator kINPUTMUX_Aoi0out0ToLpi2c4trig





enumerator kINPUTMUX_Aoi0out1ToLpi2c4trig





enumerator kINPUTMUX_Aoi0out2ToLpi2c4trig





enumerator kINPUTMUX_Aoi0out3ToLpi2c4trig





enumerator kINPUTMUX_Cmp0outToLpi2c4trig





enumerator kINPUTMUX_Ctimer0mat0ToLpi2c4trig





enumerator kINPUTMUX_Ctimer0mat1ToLpi2c4trig





enumerator kINPUTMUX_Ctimer1mat0ToLpi2c4trig





enumerator kINPUTMUX_Ctimer1mat1ToLpi2c4trig





enumerator kINPUTMUX_Ctimer2mat0ToLpi2c4trig





enumerator kINPUTMUX_Ctimer2mat1ToLpi2c4trig





enumerator kINPUTMUX_Lptmr0ToLpi2c4trig





enumerator kINPUTMUX_Trigin0ToLpi2c4trig





enumerator kINPUTMUX_Trigin1ToLpi2c4trig





enumerator kINPUTMUX_Trigin2ToLpi2c4trig





enumerator kINPUTMUX_Trigin3ToLpi2c4trig





enumerator kINPUTMUX_Trigin4ToLpi2c4trig





enumerator kINPUTMUX_Trigin5ToLpi2c4trig





enumerator kINPUTMUX_Trigin6ToLpi2c4trig





enumerator kINPUTMUX_Trigin7ToLpi2c4trig





enumerator kINPUTMUX_Gpio0pineventtrig0ToLpi2c4trig





enumerator kINPUTMUX_Gpio1pineventtrig0ToLpi2c4trig





enumerator kINPUTMUX_Gpio2pineventtrig0ToLpi2c4trig





enumerator kINPUTMUX_Gpio3pineventtrig0ToLpi2c4trig





enumerator kINPUTMUX_Gpio4pineventtrig0ToLpi2c4trig





enumerator kINPUTMUX_WuuToLpi2c4trig





enumerator kINPUTMUX_Ctimer3mat2ToLpi2c4trig





enumerator kINPUTMUX_Ctimer3mat3ToLpi2c4trig





enumerator kINPUTMUX_Ctimer4mat2ToLpi2c4trig





enumerator kINPUTMUX_Ctimer4mat3ToLpi2c4trig





enumerator kINPUTMUX_Flexio0ch0ToLpi2c4trig





enumerator kINPUTMUX_Flexio0ch1ToLpi2c4trig





enumerator kINPUTMUX_Flexio0ch2ToLpi2c4trig





enumerator kINPUTMUX_Flexio0ch3ToLpi2c4trig





enumerator kINPUTMUX_Gpio0pineventtrig1ToLpi2c4trig





enumerator kINPUTMUX_Gpio1pineventtrig1ToLpi2c4trig





enumerator kINPUTMUX_Gpio2pineventtrig1ToLpi2c4trig





enumerator kINPUTMUX_Gpio3pineventtrig1ToLpi2c4trig





enumerator kINPUTMUX_Gpio4pineventtrig1ToLpi2c4trig





enumerator kINPUTMUX_Aoi0out0ToLpspi0trig





enumerator kINPUTMUX_Aoi0out1ToLpspi0trig





enumerator kINPUTMUX_Aoi0out2ToLpspi0trig





enumerator kINPUTMUX_Aoi0out3ToLpspi0trig





enumerator kINPUTMUX_Cmp0outToLpspi0trig





enumerator kINPUTMUX_Ctimer0mat1ToLpspi0trig





enumerator kINPUTMUX_Ctimer0mat2ToLpspi0trig





enumerator kINPUTMUX_Ctimer1mat1ToLpspi0trig





enumerator kINPUTMUX_Ctimer1mat2ToLpspi0trig





enumerator kINPUTMUX_Ctimer2mat1ToLpspi0trig





enumerator kINPUTMUX_Ctimer2mat2ToLpspi0trig





enumerator kINPUTMUX_Lptmr0ToLpspi0trig





enumerator kINPUTMUX_Trigin0ToLpspi0trig





enumerator kINPUTMUX_Trigin1ToLpspi0trig





enumerator kINPUTMUX_Trigin2ToLpspi0trig





enumerator kINPUTMUX_Trigin3ToLpspi0trig





enumerator kINPUTMUX_Trigin4ToLpspi0trig





enumerator kINPUTMUX_Trigin5ToLpspi0trig





enumerator kINPUTMUX_Trigin6ToLpspi0trig





enumerator kINPUTMUX_Trigin7ToLpspi0trig





enumerator kINPUTMUX_Gpio0pineventtrig0ToLpspi0trig





enumerator kINPUTMUX_Gpio1pineventtrig0ToLpspi0trig





enumerator kINPUTMUX_Gpio2pineventtrig0ToLpspi0trig





enumerator kINPUTMUX_Gpio3pineventtrig0ToLpspi0trig





enumerator kINPUTMUX_Gpio4pineventtrig0ToLpspi0trig





enumerator kINPUTMUX_WuuToLpspi0trig





enumerator kINPUTMUX_Ctimer3mat2ToLpspi0trig





enumerator kINPUTMUX_Ctimer3mat3ToLpspi0trig





enumerator kINPUTMUX_Ctimer4mat2ToLpspi0trig





enumerator kINPUTMUX_Ctimer4mat3ToLpspi0trig





enumerator kINPUTMUX_Flexio0ch0ToLpspi0trig





enumerator kINPUTMUX_Flexio0ch1ToLpspi0trig





enumerator kINPUTMUX_Flexio0ch2ToLpspi0trig





enumerator kINPUTMUX_Flexio0ch3ToLpspi0trig





enumerator kINPUTMUX_Gpio0pineventtrig1ToLpspi0trig





enumerator kINPUTMUX_Gpio1pineventtrig1ToLpspi0trig





enumerator kINPUTMUX_Gpio2pineventtrig1ToLpspi0trig





enumerator kINPUTMUX_Gpio3pineventtrig1ToLpspi0trig





enumerator kINPUTMUX_Gpio4pineventtrig1ToLpspi0trig





enumerator kINPUTMUX_Aoi0out0ToLpspi1trig





enumerator kINPUTMUX_Aoi0out1ToLpspi1trig





enumerator kINPUTMUX_Aoi0out2ToLpspi1trig





enumerator kINPUTMUX_Aoi0out3ToLpspi1trig





enumerator kINPUTMUX_Cmp0outToLpspi1trig





enumerator kINPUTMUX_Ctimer0mat1ToLpspi1trig





enumerator kINPUTMUX_Ctimer0mat2ToLpspi1trig





enumerator kINPUTMUX_Ctimer1mat1ToLpspi1trig





enumerator kINPUTMUX_Ctimer1mat2ToLpspi1trig





enumerator kINPUTMUX_Ctimer2mat1ToLpspi1trig





enumerator kINPUTMUX_Ctimer2mat2ToLpspi1trig





enumerator kINPUTMUX_Lptmr0ToLpspi1trig





enumerator kINPUTMUX_Trigin0ToLpspi1trig





enumerator kINPUTMUX_Trigin1ToLpspi1trig





enumerator kINPUTMUX_Trigin2ToLpspi1trig





enumerator kINPUTMUX_Trigin3ToLpspi1trig





enumerator kINPUTMUX_Trigin4ToLpspi1trig





enumerator kINPUTMUX_Trigin5ToLpspi1trig





enumerator kINPUTMUX_Trigin6ToLpspi1trig





enumerator kINPUTMUX_Trigin7ToLpspi1trig





enumerator kINPUTMUX_Gpio0pineventtrig0ToLpspi1trig





enumerator kINPUTMUX_Gpio1pineventtrig0ToLpspi1trig





enumerator kINPUTMUX_Gpio2pineventtrig0ToLpspi1trig





enumerator kINPUTMUX_Gpio3pineventtrig0ToLpspi1trig





enumerator kINPUTMUX_Gpio4pineventtrig0ToLpspi1trig





enumerator kINPUTMUX_WuuToLpspi1trig





enumerator kINPUTMUX_Ctimer3mat2ToLpspi1trig





enumerator kINPUTMUX_Ctimer3mat3ToLpspi1trig





enumerator kINPUTMUX_Ctimer4mat2ToLpspi1trig





enumerator kINPUTMUX_Ctimer4mat3ToLpspi1trig





enumerator kINPUTMUX_Flexio0ch0ToLpspi1trig





enumerator kINPUTMUX_Flexio0ch1ToLpspi1trig





enumerator kINPUTMUX_Flexio0ch2ToLpspi1trig





enumerator kINPUTMUX_Flexio0ch3ToLpspi1trig





enumerator kINPUTMUX_Gpio0pineventtrig1ToLpspi1trig





enumerator kINPUTMUX_Gpio1pineventtrig1ToLpspi1trig





enumerator kINPUTMUX_Gpio2pineventtrig1ToLpspi1trig





enumerator kINPUTMUX_Gpio3pineventtrig1ToLpspi1trig





enumerator kINPUTMUX_Gpio4pineventtrig1ToLpspi1trig





enumerator kINPUTMUX_Aoi0out0ToLpspi2trig





enumerator kINPUTMUX_Aoi0out1ToLpspi2trig





enumerator kINPUTMUX_Aoi0out2ToLpspi2trig





enumerator kINPUTMUX_Aoi0out3ToLpspi2trig





enumerator kINPUTMUX_Cmp0outToLpspi2trig





enumerator kINPUTMUX_Ctimer0mat1ToLpspi2trig





enumerator kINPUTMUX_Ctimer0mat2ToLpspi2trig





enumerator kINPUTMUX_Ctimer1mat1ToLpspi2trig





enumerator kINPUTMUX_Ctimer1mat2ToLpspi2trig





enumerator kINPUTMUX_Ctimer2mat1ToLpspi2trig





enumerator kINPUTMUX_Ctimer2mat2ToLpspi2trig





enumerator kINPUTMUX_Lptmr0ToLpspi2trig





enumerator kINPUTMUX_Trigin0ToLpspi2trig





enumerator kINPUTMUX_Trigin1ToLpspi2trig





enumerator kINPUTMUX_Trigin2ToLpspi2trig





enumerator kINPUTMUX_Trigin3ToLpspi2trig





enumerator kINPUTMUX_Trigin4ToLpspi2trig





enumerator kINPUTMUX_Trigin5ToLpspi2trig





enumerator kINPUTMUX_Trigin6ToLpspi2trig





enumerator kINPUTMUX_Trigin7ToLpspi2trig





enumerator kINPUTMUX_Gpio0pineventtrig0ToLpspi2trig





enumerator kINPUTMUX_Gpio1pineventtrig0ToLpspi2trig





enumerator kINPUTMUX_Gpio2pineventtrig0ToLpspi2trig





enumerator kINPUTMUX_Gpio3pineventtrig0ToLpspi2trig





enumerator kINPUTMUX_Gpio4pineventtrig0ToLpspi2trig





enumerator kINPUTMUX_WuuToLpspi2trig





enumerator kINPUTMUX_Ctimer3mat2ToLpspi2trig





enumerator kINPUTMUX_Ctimer3mat3ToLpspi2trig





enumerator kINPUTMUX_Ctimer4mat2ToLpspi2trig





enumerator kINPUTMUX_Ctimer4mat3ToLpspi2trig





enumerator kINPUTMUX_Flexio0ch0ToLpspi2trig





enumerator kINPUTMUX_Flexio0ch1ToLpspi2trig





enumerator kINPUTMUX_Flexio0ch2ToLpspi2trig





enumerator kINPUTMUX_Flexio0ch3ToLpspi2trig





enumerator kINPUTMUX_Gpio0pineventtrig1ToLpspi2trig





enumerator kINPUTMUX_Gpio1pineventtrig1ToLpspi2trig





enumerator kINPUTMUX_Gpio2pineventtrig1ToLpspi2trig





enumerator kINPUTMUX_Gpio3pineventtrig1ToLpspi2trig





enumerator kINPUTMUX_Gpio4pineventtrig1ToLpspi2trig





enumerator kINPUTMUX_Aoi0out0ToLpspi3trig





enumerator kINPUTMUX_Aoi0out1ToLpspi3trig





enumerator kINPUTMUX_Aoi0out2ToLpspi3trig





enumerator kINPUTMUX_Aoi0out3ToLpspi3trig





enumerator kINPUTMUX_Cmp0outToLpspi3trig





enumerator kINPUTMUX_Ctimer0mat1ToLpspi3trig





enumerator kINPUTMUX_Ctimer0mat2ToLpspi3trig





enumerator kINPUTMUX_Ctimer1mat1ToLpspi3trig





enumerator kINPUTMUX_Ctimer1mat2ToLpspi3trig





enumerator kINPUTMUX_Ctimer2mat1ToLpspi3trig





enumerator kINPUTMUX_Ctimer2mat2ToLpspi3trig





enumerator kINPUTMUX_Lptmr0ToLpspi3trig





enumerator kINPUTMUX_Trigin0ToLpspi3trig





enumerator kINPUTMUX_Trigin1ToLpspi3trig





enumerator kINPUTMUX_Trigin2ToLpspi3trig





enumerator kINPUTMUX_Trigin3ToLpspi3trig





enumerator kINPUTMUX_Trigin4ToLpspi3trig





enumerator kINPUTMUX_Trigin5ToLpspi3trig





enumerator kINPUTMUX_Trigin6ToLpspi3trig





enumerator kINPUTMUX_Trigin7ToLpspi3trig





enumerator kINPUTMUX_Gpio0pineventtrig0ToLpspi3trig





enumerator kINPUTMUX_Gpio1pineventtrig0ToLpspi3trig





enumerator kINPUTMUX_Gpio2pineventtrig0ToLpspi3trig





enumerator kINPUTMUX_Gpio3pineventtrig0ToLpspi3trig





enumerator kINPUTMUX_Gpio4pineventtrig0ToLpspi3trig





enumerator kINPUTMUX_WuuToLpspi3trig





enumerator kINPUTMUX_Ctimer3mat2ToLpspi3trig





enumerator kINPUTMUX_Ctimer3mat3ToLpspi3trig





enumerator kINPUTMUX_Ctimer4mat2ToLpspi3trig





enumerator kINPUTMUX_Ctimer4mat3ToLpspi3trig





enumerator kINPUTMUX_Flexio0ch0ToLpspi3trig





enumerator kINPUTMUX_Flexio0ch1ToLpspi3trig





enumerator kINPUTMUX_Flexio0ch2ToLpspi3trig





enumerator kINPUTMUX_Flexio0ch3ToLpspi3trig





enumerator kINPUTMUX_Gpio0pineventtrig1ToLpspi3trig





enumerator kINPUTMUX_Gpio1pineventtrig1ToLpspi3trig





enumerator kINPUTMUX_Gpio2pineventtrig1ToLpspi3trig





enumerator kINPUTMUX_Gpio3pineventtrig1ToLpspi3trig





enumerator kINPUTMUX_Gpio4pineventtrig1ToLpspi3trig





enumerator kINPUTMUX_Aoi0out0ToLpspi4trig





enumerator kINPUTMUX_Aoi0out1ToLpspi4trig





enumerator kINPUTMUX_Aoi0out2ToLpspi4trig





enumerator kINPUTMUX_Aoi0out3ToLpspi4trig





enumerator kINPUTMUX_Cmp0outToLpspi4trig





enumerator kINPUTMUX_Ctimer0mat1ToLpspi4trig





enumerator kINPUTMUX_Ctimer0mat2ToLpspi4trig





enumerator kINPUTMUX_Ctimer1mat1ToLpspi4trig





enumerator kINPUTMUX_Ctimer1mat2ToLpspi4trig





enumerator kINPUTMUX_Ctimer2mat1ToLpspi4trig





enumerator kINPUTMUX_Ctimer2mat2ToLpspi4trig





enumerator kINPUTMUX_Lptmr0ToLpspi4trig





enumerator kINPUTMUX_Trigin0ToLpspi4trig





enumerator kINPUTMUX_Trigin1ToLpspi4trig





enumerator kINPUTMUX_Trigin2ToLpspi4trig





enumerator kINPUTMUX_Trigin3ToLpspi4trig





enumerator kINPUTMUX_Trigin4ToLpspi4trig





enumerator kINPUTMUX_Trigin5ToLpspi4trig





enumerator kINPUTMUX_Trigin6ToLpspi4trig





enumerator kINPUTMUX_Trigin7ToLpspi4trig





enumerator kINPUTMUX_Gpio0pineventtrig0ToLpspi4trig





enumerator kINPUTMUX_Gpio1pineventtrig0ToLpspi4trig





enumerator kINPUTMUX_Gpio2pineventtrig0ToLpspi4trig





enumerator kINPUTMUX_Gpio3pineventtrig0ToLpspi4trig





enumerator kINPUTMUX_Gpio4pineventtrig0ToLpspi4trig





enumerator kINPUTMUX_WuuToLpspi4trig





enumerator kINPUTMUX_Ctimer3mat2ToLpspi4trig





enumerator kINPUTMUX_Ctimer3mat3ToLpspi4trig





enumerator kINPUTMUX_Ctimer4mat2ToLpspi4trig





enumerator kINPUTMUX_Ctimer4mat3ToLpspi4trig





enumerator kINPUTMUX_Flexio0ch0ToLpspi4trig





enumerator kINPUTMUX_Flexio0ch1ToLpspi4trig





enumerator kINPUTMUX_Flexio0ch2ToLpspi4trig





enumerator kINPUTMUX_Flexio0ch3ToLpspi4trig





enumerator kINPUTMUX_Gpio0pineventtrig1ToLpspi4trig





enumerator kINPUTMUX_Gpio1pineventtrig1ToLpspi4trig





enumerator kINPUTMUX_Gpio2pineventtrig1ToLpspi4trig





enumerator kINPUTMUX_Gpio3pineventtrig1ToLpspi4trig





enumerator kINPUTMUX_Gpio4pineventtrig1ToLpspi4trig





enumerator kINPUTMUX_Aoi0out0ToLpspi5trig





enumerator kINPUTMUX_Aoi0out1ToLpspi5trig





enumerator kINPUTMUX_Aoi0out2ToLpspi5trig





enumerator kINPUTMUX_Aoi0out3ToLpspi5trig





enumerator kINPUTMUX_Cmp0outToLpspi5trig





enumerator kINPUTMUX_Ctimer0mat1ToLpspi5trig





enumerator kINPUTMUX_Ctimer0mat2ToLpspi5trig





enumerator kINPUTMUX_Ctimer1mat1ToLpspi5trig





enumerator kINPUTMUX_Ctimer1mat2ToLpspi5trig





enumerator kINPUTMUX_Ctimer2mat1ToLpspi5trig





enumerator kINPUTMUX_Ctimer2mat2ToLpspi5trig





enumerator kINPUTMUX_Lptmr0ToLpspi5trig





enumerator kINPUTMUX_Trigin0ToLpspi5trig





enumerator kINPUTMUX_Trigin1ToLpspi5trig





enumerator kINPUTMUX_Trigin2ToLpspi5trig





enumerator kINPUTMUX_Trigin3ToLpspi5trig





enumerator kINPUTMUX_Trigin4ToLpspi5trig





enumerator kINPUTMUX_Trigin5ToLpspi5trig





enumerator kINPUTMUX_Trigin6ToLpspi5trig





enumerator kINPUTMUX_Trigin7ToLpspi5trig





enumerator kINPUTMUX_Gpio0pineventtrig0ToLpspi5trig





enumerator kINPUTMUX_Gpio1pineventtrig0ToLpspi5trig





enumerator kINPUTMUX_Gpio2pineventtrig0ToLpspi5trig





enumerator kINPUTMUX_Gpio3pineventtrig0ToLpspi5trig





enumerator kINPUTMUX_Gpio4pineventtrig0ToLpspi5trig





enumerator kINPUTMUX_WuuToLpspi5trig





enumerator kINPUTMUX_Ctimer3mat2ToLpspi5trig





enumerator kINPUTMUX_Ctimer3mat3ToLpspi5trig





enumerator kINPUTMUX_Ctimer4mat2ToLpspi5trig





enumerator kINPUTMUX_Ctimer4mat3ToLpspi5trig





enumerator kINPUTMUX_Flexio0ch0ToLpspi5trig





enumerator kINPUTMUX_Flexio0ch1ToLpspi5trig





enumerator kINPUTMUX_Flexio0ch2ToLpspi5trig





enumerator kINPUTMUX_Flexio0ch3ToLpspi5trig





enumerator kINPUTMUX_Gpio0pineventtrig1ToLpspi5trig





enumerator kINPUTMUX_Gpio1pineventtrig1ToLpspi5trig





enumerator kINPUTMUX_Gpio2pineventtrig1ToLpspi5trig





enumerator kINPUTMUX_Gpio3pineventtrig1ToLpspi5trig





enumerator kINPUTMUX_Gpio4pineventtrig1ToLpspi5trig





enumerator kINPUTMUX_Aoi0out0ToLpuart0





enumerator kINPUTMUX_Aoi0out1ToLpuart0





enumerator kINPUTMUX_Aoi0out2ToLpuart0





enumerator kINPUTMUX_Aoi0out3ToLpuart0





enumerator kINPUTMUX_Cmp0outToLpuart0





enumerator kINPUTMUX_Ctimer0mat2ToLpuart0





enumerator kINPUTMUX_Ctimer0mat3ToLpuart0





enumerator kINPUTMUX_Ctimer1mat2ToLpuart0





enumerator kINPUTMUX_Ctimer1mat3ToLpuart0





enumerator kINPUTMUX_Ctimer2mat2ToLpuart0





enumerator kINPUTMUX_Ctimer2mat3ToLpuart0





enumerator kINPUTMUX_Lptmr0ToLpuart0





enumerator kINPUTMUX_Trigin0ToLpuart0





enumerator kINPUTMUX_Trigin1ToLpuart0





enumerator kINPUTMUX_Trigin2ToLpuart0





enumerator kINPUTMUX_Trigin3ToLpuart0





enumerator kINPUTMUX_Trigin4ToLpuart0





enumerator kINPUTMUX_Trigin5ToLpuart0





enumerator kINPUTMUX_Trigin6ToLpuart0





enumerator kINPUTMUX_Trigin7ToLpuart0





enumerator kINPUTMUX_Trigin8ToLpuart0





enumerator kINPUTMUX_Trigin9ToLpuart0





enumerator kINPUTMUX_Trigin10ToLpuart0





enumerator kINPUTMUX_Trigin11ToLpuart0





enumerator kINPUTMUX_Gpio0pineventtrig0ToLpuart0





enumerator kINPUTMUX_Gpio1pineventtrig0ToLpuart0





enumerator kINPUTMUX_Gpio2pineventtrig0ToLpuart0





enumerator kINPUTMUX_Gpio3pineventtrig0ToLpuart0





enumerator kINPUTMUX_Gpio4pineventtrig0ToLpuart0





enumerator kINPUTMUX_WuuToLpuart0





enumerator kINPUTMUX_Ctimer3mat2ToLpuart0





enumerator kINPUTMUX_Ctimer3mat3ToLpuart0





enumerator kINPUTMUX_Ctimer4mat2ToLpuart0





enumerator kINPUTMUX_Ctimer4mat3ToLpuart0





enumerator kINPUTMUX_Flexio0ch0ToLpuart0





enumerator kINPUTMUX_Flexio0ch1ToLpuart0





enumerator kINPUTMUX_Flexio0ch2ToLpuart0





enumerator kINPUTMUX_Flexio0ch3ToLpuart0





enumerator kINPUTMUX_Gpio0pineventtrig1ToLpuart0





enumerator kINPUTMUX_Gpio1pineventtrig1ToLpuart0





enumerator kINPUTMUX_Gpio2pineventtrig1ToLpuart0





enumerator kINPUTMUX_Gpio3pineventtrig1ToLpuart0





enumerator kINPUTMUX_Gpio4pineventtrig1ToLpuart0





enumerator kINPUTMUX_Aoi0out0ToLpuart1





enumerator kINPUTMUX_Aoi0out1ToLpuart1





enumerator kINPUTMUX_Aoi0out2ToLpuart1





enumerator kINPUTMUX_Aoi0out3ToLpuart1





enumerator kINPUTMUX_Cmp0outToLpuart1





enumerator kINPUTMUX_Ctimer0mat2ToLpuart1





enumerator kINPUTMUX_Ctimer0mat3ToLpuart1





enumerator kINPUTMUX_Ctimer1mat2ToLpuart1





enumerator kINPUTMUX_Ctimer1mat3ToLpuart1





enumerator kINPUTMUX_Ctimer2mat2ToLpuart1





enumerator kINPUTMUX_Ctimer2mat3ToLpuart1





enumerator kINPUTMUX_Lptmr0ToLpuart1





enumerator kINPUTMUX_Trigin0ToLpuart1





enumerator kINPUTMUX_Trigin1ToLpuart1





enumerator kINPUTMUX_Trigin2ToLpuart1





enumerator kINPUTMUX_Trigin3ToLpuart1





enumerator kINPUTMUX_Trigin4ToLpuart1





enumerator kINPUTMUX_Trigin5ToLpuart1





enumerator kINPUTMUX_Trigin6ToLpuart1





enumerator kINPUTMUX_Trigin7ToLpuart1





enumerator kINPUTMUX_Trigin8ToLpuart1





enumerator kINPUTMUX_Trigin9ToLpuart1





enumerator kINPUTMUX_Trigin10ToLpuart1





enumerator kINPUTMUX_Trigin11ToLpuart1





enumerator kINPUTMUX_Gpio0pineventtrig0ToLpuart1





enumerator kINPUTMUX_Gpio1pineventtrig0ToLpuart1





enumerator kINPUTMUX_Gpio2pineventtrig0ToLpuart1





enumerator kINPUTMUX_Gpio3pineventtrig0ToLpuart1





enumerator kINPUTMUX_Gpio4pineventtrig0ToLpuart1





enumerator kINPUTMUX_WuuToLpuart1





enumerator kINPUTMUX_Ctimer3mat2ToLpuart1





enumerator kINPUTMUX_Ctimer3mat3ToLpuart1





enumerator kINPUTMUX_Ctimer4mat2ToLpuart1





enumerator kINPUTMUX_Ctimer4mat3ToLpuart1





enumerator kINPUTMUX_Flexio0ch0ToLpuart1





enumerator kINPUTMUX_Flexio0ch1ToLpuart1





enumerator kINPUTMUX_Flexio0ch2ToLpuart1





enumerator kINPUTMUX_Flexio0ch3ToLpuart1





enumerator kINPUTMUX_Gpio0pineventtrig1ToLpuart1





enumerator kINPUTMUX_Gpio1pineventtrig1ToLpuart1





enumerator kINPUTMUX_Gpio2pineventtrig1ToLpuart1





enumerator kINPUTMUX_Gpio3pineventtrig1ToLpuart1





enumerator kINPUTMUX_Gpio4pineventtrig1ToLpuart1





enumerator kINPUTMUX_Aoi0out0ToLpuart2





enumerator kINPUTMUX_Aoi0out1ToLpuart2





enumerator kINPUTMUX_Aoi0out2ToLpuart2





enumerator kINPUTMUX_Aoi0out3ToLpuart2





enumerator kINPUTMUX_Cmp0outToLpuart2





enumerator kINPUTMUX_Ctimer0mat2ToLpuart2





enumerator kINPUTMUX_Ctimer0mat3ToLpuart2





enumerator kINPUTMUX_Ctimer1mat2ToLpuart2





enumerator kINPUTMUX_Ctimer1mat3ToLpuart2





enumerator kINPUTMUX_Ctimer2mat2ToLpuart2





enumerator kINPUTMUX_Ctimer2mat3ToLpuart2





enumerator kINPUTMUX_Lptmr0ToLpuart2





enumerator kINPUTMUX_Trigin0ToLpuart2





enumerator kINPUTMUX_Trigin1ToLpuart2





enumerator kINPUTMUX_Trigin2ToLpuart2





enumerator kINPUTMUX_Trigin3ToLpuart2





enumerator kINPUTMUX_Trigin4ToLpuart2





enumerator kINPUTMUX_Trigin5ToLpuart2





enumerator kINPUTMUX_Trigin6ToLpuart2





enumerator kINPUTMUX_Trigin7ToLpuart2





enumerator kINPUTMUX_Trigin8ToLpuart2





enumerator kINPUTMUX_Trigin9ToLpuart2





enumerator kINPUTMUX_Trigin10ToLpuart2





enumerator kINPUTMUX_Trigin11ToLpuart2





enumerator kINPUTMUX_Gpio0pineventtrig0ToLpuart2





enumerator kINPUTMUX_Gpio1pineventtrig0ToLpuart2





enumerator kINPUTMUX_Gpio2pineventtrig0ToLpuart2





enumerator kINPUTMUX_Gpio3pineventtrig0ToLpuart2





enumerator kINPUTMUX_Gpio4pineventtrig0ToLpuart2





enumerator kINPUTMUX_WuuToLpuart2





enumerator kINPUTMUX_Ctimer3mat2ToLpuart2





enumerator kINPUTMUX_Ctimer3mat3ToLpuart2





enumerator kINPUTMUX_Ctimer4mat2ToLpuart2





enumerator kINPUTMUX_Ctimer4mat3ToLpuart2





enumerator kINPUTMUX_Flexio0ch0ToLpuart2





enumerator kINPUTMUX_Flexio0ch1ToLpuart2





enumerator kINPUTMUX_Flexio0ch2ToLpuart2





enumerator kINPUTMUX_Flexio0ch3ToLpuart2





enumerator kINPUTMUX_Gpio0pineventtrig1ToLpuart2





enumerator kINPUTMUX_Gpio1pineventtrig1ToLpuart2





enumerator kINPUTMUX_Gpio2pineventtrig1ToLpuart2





enumerator kINPUTMUX_Gpio3pineventtrig1ToLpuart2





enumerator kINPUTMUX_Gpio4pineventtrig1ToLpuart2





enumerator kINPUTMUX_Aoi0out0ToLpuart3





enumerator kINPUTMUX_Aoi0out1ToLpuart3





enumerator kINPUTMUX_Aoi0out2ToLpuart3





enumerator kINPUTMUX_Aoi0out3ToLpuart3





enumerator kINPUTMUX_Cmp0outToLpuart3





enumerator kINPUTMUX_Ctimer0mat2ToLpuart3





enumerator kINPUTMUX_Ctimer0mat3ToLpuart3





enumerator kINPUTMUX_Ctimer1mat2ToLpuart3





enumerator kINPUTMUX_Ctimer1mat3ToLpuart3





enumerator kINPUTMUX_Ctimer2mat2ToLpuart3





enumerator kINPUTMUX_Ctimer2mat3ToLpuart3





enumerator kINPUTMUX_Lptmr0ToLpuart3





enumerator kINPUTMUX_Trigin0ToLpuart3





enumerator kINPUTMUX_Trigin1ToLpuart3





enumerator kINPUTMUX_Trigin2ToLpuart3





enumerator kINPUTMUX_Trigin3ToLpuart3





enumerator kINPUTMUX_Trigin4ToLpuart3





enumerator kINPUTMUX_Trigin5ToLpuart3





enumerator kINPUTMUX_Trigin6ToLpuart3





enumerator kINPUTMUX_Trigin7ToLpuart3





enumerator kINPUTMUX_Trigin8ToLpuart3





enumerator kINPUTMUX_Trigin9ToLpuart3





enumerator kINPUTMUX_Trigin10ToLpuart3





enumerator kINPUTMUX_Trigin11ToLpuart3





enumerator kINPUTMUX_Gpio0pineventtrig0ToLpuart3





enumerator kINPUTMUX_Gpio1pineventtrig0ToLpuart3





enumerator kINPUTMUX_Gpio2pineventtrig0ToLpuart3





enumerator kINPUTMUX_Gpio3pineventtrig0ToLpuart3





enumerator kINPUTMUX_Gpio4pineventtrig0ToLpuart3





enumerator kINPUTMUX_WuuToLpuart3





enumerator kINPUTMUX_Ctimer3mat2ToLpuart3





enumerator kINPUTMUX_Ctimer3mat3ToLpuart3





enumerator kINPUTMUX_Ctimer4mat2ToLpuart3





enumerator kINPUTMUX_Ctimer4mat3ToLpuart3





enumerator kINPUTMUX_Flexio0ch0ToLpuart3





enumerator kINPUTMUX_Flexio0ch1ToLpuart3





enumerator kINPUTMUX_Flexio0ch2ToLpuart3





enumerator kINPUTMUX_Flexio0ch3ToLpuart3





enumerator kINPUTMUX_Gpio0pineventtrig1ToLpuart3





enumerator kINPUTMUX_Gpio1pineventtrig1ToLpuart3





enumerator kINPUTMUX_Gpio2pineventtrig1ToLpuart3





enumerator kINPUTMUX_Gpio3pineventtrig1ToLpuart3





enumerator kINPUTMUX_Gpio4pineventtrig1ToLpuart3





enumerator kINPUTMUX_Aoi0out0ToLpuart4





enumerator kINPUTMUX_Aoi0out1ToLpuart4





enumerator kINPUTMUX_Aoi0out2ToLpuart4





enumerator kINPUTMUX_Aoi0out3ToLpuart4





enumerator kINPUTMUX_Cmp0outToLpuart4





enumerator kINPUTMUX_Ctimer0mat2ToLpuart4





enumerator kINPUTMUX_Ctimer0mat3ToLpuart4





enumerator kINPUTMUX_Ctimer1mat2ToLpuart4





enumerator kINPUTMUX_Ctimer1mat3ToLpuart4





enumerator kINPUTMUX_Ctimer2mat2ToLpuart4





enumerator kINPUTMUX_Ctimer2mat3ToLpuart4





enumerator kINPUTMUX_Lptmr0ToLpuart4





enumerator kINPUTMUX_Trigin0ToLpuart4





enumerator kINPUTMUX_Trigin1ToLpuart4





enumerator kINPUTMUX_Trigin2ToLpuart4





enumerator kINPUTMUX_Trigin3ToLpuart4





enumerator kINPUTMUX_Trigin4ToLpuart4





enumerator kINPUTMUX_Trigin5ToLpuart4





enumerator kINPUTMUX_Trigin6ToLpuart4





enumerator kINPUTMUX_Trigin7ToLpuart4





enumerator kINPUTMUX_Trigin8ToLpuart4





enumerator kINPUTMUX_Trigin9ToLpuart4





enumerator kINPUTMUX_Trigin10ToLpuart4





enumerator kINPUTMUX_Trigin11ToLpuart4





enumerator kINPUTMUX_Gpio0pineventtrig0ToLpuart4





enumerator kINPUTMUX_Gpio1pineventtrig0ToLpuart4





enumerator kINPUTMUX_Gpio2pineventtrig0ToLpuart4





enumerator kINPUTMUX_Gpio3pineventtrig0ToLpuart4





enumerator kINPUTMUX_Gpio4pineventtrig0ToLpuart4





enumerator kINPUTMUX_WuuToLpuart4





enumerator kINPUTMUX_Ctimer3mat2ToLpuart4





enumerator kINPUTMUX_Ctimer3mat3ToLpuart4





enumerator kINPUTMUX_Ctimer4mat2ToLpuart4





enumerator kINPUTMUX_Ctimer4mat3ToLpuart4





enumerator kINPUTMUX_Flexio0ch0ToLpuart4





enumerator kINPUTMUX_Flexio0ch1ToLpuart4





enumerator kINPUTMUX_Flexio0ch2ToLpuart4





enumerator kINPUTMUX_Flexio0ch3ToLpuart4





enumerator kINPUTMUX_Gpio0pineventtrig1ToLpuart4





enumerator kINPUTMUX_Gpio1pineventtrig1ToLpuart4





enumerator kINPUTMUX_Gpio2pineventtrig1ToLpuart4





enumerator kINPUTMUX_Gpio3pineventtrig1ToLpuart4





enumerator kINPUTMUX_Gpio4pineventtrig1ToLpuart4





enumerator kINPUTMUX_Aoi0out0ToLpuart5





enumerator kINPUTMUX_Aoi0out1ToLpuart5





enumerator kINPUTMUX_Aoi0out2ToLpuart5





enumerator kINPUTMUX_Aoi0out3ToLpuart5





enumerator kINPUTMUX_Cmp0outToLpuart5





enumerator kINPUTMUX_Ctimer0mat2ToLpuart5





enumerator kINPUTMUX_Ctimer0mat3ToLpuart5





enumerator kINPUTMUX_Ctimer1mat2ToLpuart5





enumerator kINPUTMUX_Ctimer1mat3ToLpuart5





enumerator kINPUTMUX_Ctimer2mat2ToLpuart5





enumerator kINPUTMUX_Ctimer2mat3ToLpuart5





enumerator kINPUTMUX_Lptmr0ToLpuart5





enumerator kINPUTMUX_Trigin0ToLpuart5





enumerator kINPUTMUX_Trigin1ToLpuart5





enumerator kINPUTMUX_Trigin2ToLpuart5





enumerator kINPUTMUX_Trigin3ToLpuart5





enumerator kINPUTMUX_Trigin4ToLpuart5





enumerator kINPUTMUX_Trigin5ToLpuart5





enumerator kINPUTMUX_Trigin6ToLpuart5





enumerator kINPUTMUX_Trigin7ToLpuart5





enumerator kINPUTMUX_Trigin8ToLpuart5





enumerator kINPUTMUX_Trigin9ToLpuart5





enumerator kINPUTMUX_Trigin10ToLpuart5





enumerator kINPUTMUX_Trigin11ToLpuart5





enumerator kINPUTMUX_Gpio0pineventtrig0ToLpuart5





enumerator kINPUTMUX_Gpio1pineventtrig0ToLpuart5





enumerator kINPUTMUX_Gpio2pineventtrig0ToLpuart5





enumerator kINPUTMUX_Gpio3pineventtrig0ToLpuart5





enumerator kINPUTMUX_Gpio4pineventtrig0ToLpuart5





enumerator kINPUTMUX_WuuToLpuart5





enumerator kINPUTMUX_Ctimer3mat2ToLpuart5





enumerator kINPUTMUX_Ctimer3mat3ToLpuart5





enumerator kINPUTMUX_Ctimer4mat2ToLpuart5





enumerator kINPUTMUX_Ctimer4mat3ToLpuart5





enumerator kINPUTMUX_Flexio0ch0ToLpuart5





enumerator kINPUTMUX_Flexio0ch1ToLpuart5





enumerator kINPUTMUX_Flexio0ch2ToLpuart5





enumerator kINPUTMUX_Flexio0ch3ToLpuart5





enumerator kINPUTMUX_Gpio0pineventtrig1ToLpuart5





enumerator kINPUTMUX_Gpio1pineventtrig1ToLpuart5





enumerator kINPUTMUX_Gpio2pineventtrig1ToLpuart5





enumerator kINPUTMUX_Gpio3pineventtrig1ToLpuart5





enumerator kINPUTMUX_Gpio4pineventtrig1ToLpuart5





enumerator kINPUTMUX_Aoi0out0ToFlexiotrig





enumerator kINPUTMUX_Aoi0out1ToFlexiotrig





enumerator kINPUTMUX_Aoi0out2ToFlexiotrig





enumerator kINPUTMUX_Aoi0out3ToFlexiotrig





enumerator kINPUTMUX_Adc0tcomp0ToFlexiotrig





enumerator kINPUTMUX_Adc0tcomp1ToFlexiotrig





enumerator kINPUTMUX_Adc0tcomp2ToFlexiotrig





enumerator kINPUTMUX_Adc0tcomp3ToFlexiotrig





enumerator kINPUTMUX_Cmp0outToFlexiotrig





enumerator kINPUTMUX_Ctimer0mat1ToFlexiotrig





enumerator kINPUTMUX_Ctimer0mat2ToFlexiotrig





enumerator kINPUTMUX_Ctimer1mat1ToFlexiotrig





enumerator kINPUTMUX_Ctimer1mat2ToFlexiotrig





enumerator kINPUTMUX_Ctimer2mat1ToFlexiotrig





enumerator kINPUTMUX_Ctimer2mat2ToFlexiotrig





enumerator kINPUTMUX_Lptmr0ToFlexiotrig





enumerator kINPUTMUX_Trigin0ToFlexiotrig





enumerator kINPUTMUX_Trigin1ToFlexiotrig





enumerator kINPUTMUX_Trigin2ToFlexiotrig





enumerator kINPUTMUX_Trigin3ToFlexiotrig





enumerator kINPUTMUX_Trigin4ToFlexiotrig





enumerator kINPUTMUX_Trigin5ToFlexiotrig





enumerator kINPUTMUX_Trigin6ToFlexiotrig





enumerator kINPUTMUX_Trigin7ToFlexiotrig





enumerator kINPUTMUX_Gpio0pineventtrig0ToFlexiotrig





enumerator kINPUTMUX_Gpio1pineventtrig0ToFlexiotrig





enumerator kINPUTMUX_Gpio2pineventtrig0ToFlexiotrig





enumerator kINPUTMUX_Gpio3pineventtrig0ToFlexiotrig





enumerator kINPUTMUX_Gpio4pineventtrig0ToFlexiotrig





enumerator kINPUTMUX_WuuToFlexiotrig





enumerator kINPUTMUX_Lpi2c0masterendofpacketToFlexiotrig





enumerator kINPUTMUX_Lpi2c0slaveendofpacketToFlexiotrig





enumerator kINPUTMUX_Lpi2c1masterendofpacketToFlexiotrig





enumerator kINPUTMUX_Lpi2c1slaveendofpacketToFlexiotrig





enumerator kINPUTMUX_Lpspi0endofframeToFlexiotrig





enumerator kINPUTMUX_Lpspi0receiveddatawordToFlexiotrig





enumerator kINPUTMUX_Lpspi1endofframeToFlexiotrig





enumerator kINPUTMUX_Lpspi1receiveddatawordToFlexiotrig





enumerator kINPUTMUX_Lpuart0receiveddatawordToFlexiotrig





enumerator kINPUTMUX_Lpuart0transmitteddatawordToFlexiotrig





enumerator kINPUTMUX_Lpuart0receivelineidleToFlexiotrig





enumerator kINPUTMUX_Lpuart1receiveddatawordToFlexiotrig





enumerator kINPUTMUX_Lpuart1transmitteddatawordToFlexiotrig





enumerator kINPUTMUX_Lpuart1receivelineidleToFlexiotrig





enumerator kINPUTMUX_Lpuart2receiveddatawordToFlexiotrig





enumerator kINPUTMUX_Lpuart2transmitteddatawordToFlexiotrig





enumerator kINPUTMUX_Lpuart2receivelineidleToFlexiotrig





enumerator kINPUTMUX_Lpuart3receiveddatawordToFlexiotrig





enumerator kINPUTMUX_Lpuart3transmitteddatawordToFlexiotrig





enumerator kINPUTMUX_Lpuart3receivelineidleToFlexiotrig





enumerator kINPUTMUX_Lpuart4receiveddatawordToFlexiotrig





enumerator kINPUTMUX_Lpuart4transmitteddatawordToFlexiotrig





enumerator kINPUTMUX_Lpuart4receivelineidleToFlexiotrig





enumerator kINPUTMUX_Adc1tcomp0ToFlexiotrig





enumerator kINPUTMUX_Adc1tcomp1ToFlexiotrig





enumerator kINPUTMUX_Adc1tcomp2ToFlexiotrig





enumerator kINPUTMUX_Adc1tcomp3ToFlexiotrig





enumerator kINPUTMUX_Ctimer3mat2ToFlexiotrig





enumerator kINPUTMUX_Ctimer3mat3ToFlexiotrig





enumerator kINPUTMUX_Ctimer4mat2ToFlexiotrig





enumerator kINPUTMUX_Ctimer4mat3ToFlexiotrig





enumerator kINPUTMUX_Lpi2c2masterendofpacketToFlexiotrig





enumerator kINPUTMUX_Lpi2c2slaveendofpacketToFlexiotrig





enumerator kINPUTMUX_Lpi2c3masterendofpacketToFlexiotrig





enumerator kINPUTMUX_Lpi2c3slaveendofpacketToFlexiotrig





enumerator kINPUTMUX_Lpspi2endofframeToFlexiotrig





enumerator kINPUTMUX_Lpspi2receiveddatawordToFlexiotrig





enumerator kINPUTMUX_Lpspi3endofframeToFlexiotrig





enumerator kINPUTMUX_Lpspi3receiveddatawordToFlexiotrig





enumerator kINPUTMUX_Gpio0pineventtrig1ToFlexiotrig





enumerator kINPUTMUX_Gpio1pineventtrig1ToFlexiotrig





enumerator kINPUTMUX_Gpio2pineventtrig1ToFlexiotrig





enumerator kINPUTMUX_Gpio3pineventtrig1ToFlexiotrig





enumerator kINPUTMUX_Gpio4pineventtrig1ToFlexiotrig





enumerator kINPUTMUX_ArmtxevToDac0trig





enumerator kINPUTMUX_Aoi0out0ToDac0trig





enumerator kINPUTMUX_Aoi0out1ToDac0trig





enumerator kINPUTMUX_Aoi0out2ToDac0trig





enumerator kINPUTMUX_Aoi0out3ToDac0trig





enumerator kINPUTMUX_Cmp0outToDac0trig





enumerator kINPUTMUX_Ctimer0mat0ToDac0trig





enumerator kINPUTMUX_Ctimer0mat1ToDac0trig





enumerator kINPUTMUX_Ctimer1mat0ToDac0trig





enumerator kINPUTMUX_Ctimer1mat1ToDac0trig





enumerator kINPUTMUX_Ctimer2mat0ToDac0trig





enumerator kINPUTMUX_Ctimer2mat1ToDac0trig





enumerator kINPUTMUX_Lptmr0ToDac0trig





enumerator kINPUTMUX_Gpio0pineventtrig0ToDac0trig





enumerator kINPUTMUX_Gpio1pineventtrig0ToDac0trig





enumerator kINPUTMUX_Gpio2pineventtrig0ToDac0trig





enumerator kINPUTMUX_Gpio3pineventtrig0ToDac0trig





enumerator kINPUTMUX_Gpio4pineventtrig0ToDac0trig





enumerator kINPUTMUX_WuuToDac0trig





enumerator kINPUTMUX_Adc0tcomp0ToDac0trig





enumerator kINPUTMUX_Adc0tcomp1ToDac0trig





enumerator kINPUTMUX_Adc1tcomp0ToDac0trig





enumerator kINPUTMUX_Adc1tcomp1ToDac0trig





enumerator kINPUTMUX_Ctimer3mat0ToDac0trig





enumerator kINPUTMUX_Ctimer3mat1ToDac0trig





enumerator kINPUTMUX_Ctimer4mat0ToDac0trig





enumerator kINPUTMUX_Ctimer4mat1ToDac0trig





enumerator kINPUTMUX_Gpio0pineventtrig1ToDac0trig





enumerator kINPUTMUX_Gpio1pineventtrig1ToDac0trig





enumerator kINPUTMUX_Gpio2pineventtrig1ToDac0trig





enumerator kINPUTMUX_Gpio3pineventtrig1ToDac0trig





enumerator kINPUTMUX_Gpio4pineventtrig1ToDac0trig





enumerator kINPUTMUX_Ctimer0mat2ToTsi0triginput





enumerator kINPUTMUX_Ctimer0mat3ToTsi0triginput





enumerator kINPUTMUX_Ctimer1mat2ToTsi0triginput





enumerator kINPUTMUX_Ctimer1mat3ToTsi0triginput





enumerator kINPUTMUX_Ctimer2mat2ToTsi0triginput





enumerator kINPUTMUX_Ctimer2mat3ToTsi0triginput





enumerator kINPUTMUX_Ctimer3mat2ToTsi0triginput





enumerator kINPUTMUX_Ctimer3mat3ToTsi0triginput





enumerator kINPUTMUX_Ctimer4mat2ToTsi0triginput





enumerator kINPUTMUX_Ctimer4mat3ToTsi0triginput





enumerator kINPUTMUX_Lptmr0ToTsi0triginput





enumerator kINPUTMUX_WuuToTsi0triginput





enumerator kINPUTMUX_Tenbaset1srxeventoutputToEnettrigin





enumerator kINPUTMUX_Tenbaset1stxeventoutputToEnettrigin





enumerator kINPUTMUX_Trigin0ToEnettrigin





enumerator kINPUTMUX_Trigin1ToEnettrigin





enumerator kINPUTMUX_Trigin2ToEnettrigin





enumerator kINPUTMUX_Trigin3ToEnettrigin





enumerator kINPUTMUX_Trigin4ToEnettrigin





enumerator kINPUTMUX_Trigin5ToEnettrigin





enumerator kINPUTMUX_Trigin6ToEnettrigin





enumerator kINPUTMUX_Trigin7ToEnettrigin





enumerator kINPUTMUX_Trigin8ToEnettrigin





enumerator kINPUTMUX_Trigin9ToEnettrigin





enumerator kINPUTMUX_Trigin10ToEnettrigin





enumerator kINPUTMUX_Trigin11ToEnettrigin





enumerator kINPUTMUX_Gpio0pineventtrig0ToEnettrigin





enumerator kINPUTMUX_Gpio1pineventtrig0ToEnettrigin





enumerator kINPUTMUX_Gpio2pineventtrig0ToEnettrigin





enumerator kINPUTMUX_Gpio3pineventtrig0ToEnettrigin





enumerator kINPUTMUX_Gpio4pineventtrig0ToEnettrigin





enumerator kINPUTMUX_Gpio0pineventtrig1ToEnettrigin





enumerator kINPUTMUX_Gpio1pineventtrig1ToEnettrigin





enumerator kINPUTMUX_Gpio2pineventtrig1ToEnettrigin





enumerator kINPUTMUX_Gpio3pineventtrig1ToEnettrigin





enumerator kINPUTMUX_Gpio4pineventtrig1ToEnettrigin





enumerator kINPUTMUX_Aoi0out0ToT1swkup





enumerator kINPUTMUX_Aoi0out1ToT1swkup





enumerator kINPUTMUX_Aoi0out2ToT1swkup





enumerator kINPUTMUX_Aoi0out3ToT1swkup





enumerator kINPUTMUX_Adc0tcomp0ToT1swkup





enumerator kINPUTMUX_Adc0tcomp1ToT1swkup





enumerator kINPUTMUX_Adc0tcomp2ToT1swkup





enumerator kINPUTMUX_Adc0tcomp3ToT1swkup





enumerator kINPUTMUX_Cmp0outToT1swkup





enumerator kINPUTMUX_Ctimer0mat1ToT1swkup





enumerator kINPUTMUX_Ctimer0mat2ToT1swkup





enumerator kINPUTMUX_Ctimer1mat1ToT1swkup





enumerator kINPUTMUX_Ctimer1mat2ToT1swkup





enumerator kINPUTMUX_Ctimer2mat1ToT1swkup





enumerator kINPUTMUX_Ctimer2mat2ToT1swkup





enumerator kINPUTMUX_Lptmr0ToT1swkup





enumerator kINPUTMUX_Trigin0ToT1swkup





enumerator kINPUTMUX_Trigin1ToT1swkup





enumerator kINPUTMUX_Trigin2ToT1swkup





enumerator kINPUTMUX_Trigin3ToT1swkup





enumerator kINPUTMUX_Trigin4ToT1swkup





enumerator kINPUTMUX_Trigin5ToT1swkup





enumerator kINPUTMUX_Trigin6ToT1swkup





enumerator kINPUTMUX_Trigin7ToT1swkup





enumerator kINPUTMUX_Gpio0pineventtrig0ToT1swkup





enumerator kINPUTMUX_Gpio1pineventtrig0ToT1swkup





enumerator kINPUTMUX_Gpio2pineventtrig0ToT1swkup





enumerator kINPUTMUX_Gpio3pineventtrig0ToT1swkup





enumerator kINPUTMUX_Gpio4pineventtrig0ToT1swkup





enumerator kINPUTMUX_Lpspi0receiveddatawordToT1swkup





enumerator kINPUTMUX_Lpspi1receiveddatawordToT1swkup





enumerator kINPUTMUX_Lpuart0receiveddatawordToT1swkup





enumerator kINPUTMUX_Lpuart1receiveddatawordToT1swkup





enumerator kINPUTMUX_Lpuart2receiveddatawordToT1swkup





enumerator kINPUTMUX_Lpuart3receiveddatawordToT1swkup





enumerator kINPUTMUX_Lpuart4receiveddatawordToT1swkup





enumerator kINPUTMUX_Adc1tcomp0ToT1swkup





enumerator kINPUTMUX_Adc1tcomp1ToT1swkup





enumerator kINPUTMUX_Adc1tcomp2ToT1swkup





enumerator kINPUTMUX_Adc1tcomp3ToT1swkup





enumerator kINPUTMUX_Ctimer3mat2ToT1swkup





enumerator kINPUTMUX_Ctimer3mat3ToT1swkup





enumerator kINPUTMUX_Ctimer4mat2ToT1swkup





enumerator kINPUTMUX_Ctimer4mat3ToT1swkup





enumerator kINPUTMUX_Lpspi2receiveddatawordToT1swkup





enumerator kINPUTMUX_Lpspi3receiveddatawordToT1swkup





enumerator kINPUTMUX_Gpio0pineventtrig1ToT1swkup





enumerator kINPUTMUX_Gpio1pineventtrig1ToT1swkup





enumerator kINPUTMUX_Gpio2pineventtrig1ToT1swkup





enumerator kINPUTMUX_Gpio3pineventtrig1ToT1swkup





enumerator kINPUTMUX_Gpio4pineventtrig1ToT1swkup





enumerator kINPUTMUX_ArmtxevToDac1trig





enumerator kINPUTMUX_Aoi0out0ToDac1trig





enumerator kINPUTMUX_Aoi0out1ToDac1trig





enumerator kINPUTMUX_Aoi0out2ToDac1trig





enumerator kINPUTMUX_Aoi0out3ToDac1trig





enumerator kINPUTMUX_Cmp0outToDac1trig





enumerator kINPUTMUX_Ctimer0mat0ToDac1trig





enumerator kINPUTMUX_Ctimer0mat1ToDac1trig





enumerator kINPUTMUX_Ctimer1mat0ToDac1trig





enumerator kINPUTMUX_Ctimer1mat1ToDac1trig





enumerator kINPUTMUX_Ctimer2mat0ToDac1trig





enumerator kINPUTMUX_Ctimer2mat1ToDac1trig





enumerator kINPUTMUX_Lptmr0ToDac1trig





enumerator kINPUTMUX_Gpio0pineventtrig0ToDac1trig





enumerator kINPUTMUX_Gpio1pineventtrig0ToDac1trig





enumerator kINPUTMUX_Gpio2pineventtrig0ToDac1trig





enumerator kINPUTMUX_Gpio3pineventtrig0ToDac1trig





enumerator kINPUTMUX_Gpio4pineventtrig0ToDac1trig





enumerator kINPUTMUX_WuuToDac1trig





enumerator kINPUTMUX_Adc0tcomp0ToDac1trig





enumerator kINPUTMUX_Adc0tcomp1ToDac1trig





enumerator kINPUTMUX_Adc1tcomp0ToDac1trig





enumerator kINPUTMUX_Adc1tcomp1ToDac1trig





enumerator kINPUTMUX_Ctimer3mat0ToDac1trig





enumerator kINPUTMUX_Ctimer3mat1ToDac1trig





enumerator kINPUTMUX_Ctimer4mat0ToDac1trig





enumerator kINPUTMUX_Ctimer4mat1ToDac1trig





enumerator kINPUTMUX_Gpio0pineventtrig1ToDac1trig





enumerator kINPUTMUX_Gpio1pineventtrig1ToDac1trig





enumerator kINPUTMUX_Gpio2pineventtrig1ToDac1trig





enumerator kINPUTMUX_Gpio3pineventtrig1ToDac1trig





enumerator kINPUTMUX_Gpio4pineventtrig1ToDac1trig





enumerator kINPUTMUX_Aoi0out0ToTrigout





enumerator kINPUTMUX_Aoi0out1ToTrigout





enumerator kINPUTMUX_Aoi0out2ToTrigout





enumerator kINPUTMUX_Aoi0out3ToTrigout





enumerator kINPUTMUX_Cmp0outToTrigout





enumerator kINPUTMUX_Lpuart0ippdolpuarttxdToTrigout





enumerator kINPUTMUX_Lpuart1ippdolpuarttxdToTrigout





enumerator kINPUTMUX_Lpuart2ippdolpuarttxdToTrigout





enumerator kINPUTMUX_Lpuart3ippdolpuarttxdToTrigout





enumerator kINPUTMUX_Lpuart4ippdolpuarttxdToTrigout





enumerator kINPUTMUX_Lpuart5ippdolpuarttxdToTrigout





enumerator kINPUTMUX_Usb1startofframeToTrigout





enumerator kINPUTMUX_EnetppsoutputToTrigout





enumerator kINPUTMUX_Gpiop016ToSmartdmatrig





enumerator kINPUTMUX_Gpiop017ToSmartdmatrig





enumerator kINPUTMUX_Gpiop18ToSmartdmatrig





enumerator kINPUTMUX_Gpiop19ToSmartdmatrig





enumerator kINPUTMUX_Gpiop110ToSmartdmatrig





enumerator kINPUTMUX_Gpiop111ToSmartdmatrig





enumerator kINPUTMUX_Gpiop112ToSmartdmatrig





enumerator kINPUTMUX_Gpiop113ToSmartdmatrig





enumerator kINPUTMUX_Gpiop20ToSmartdmatrig





enumerator kINPUTMUX_Gpiop21ToSmartdmatrig





enumerator kINPUTMUX_Gpiop22ToSmartdmatrig





enumerator kINPUTMUX_Gpiop23ToSmartdmatrig





enumerator kINPUTMUX_Gpiop26ToSmartdmatrig





enumerator kINPUTMUX_Gpiop38ToSmartdmatrig





enumerator kINPUTMUX_Gpiop39ToSmartdmatrig





enumerator kINPUTMUX_Gpiop310ToSmartdmatrig





enumerator kINPUTMUX_Gpiop311ToSmartdmatrig





enumerator kINPUTMUX_Gpiop312ToSmartdmatrig





enumerator kINPUTMUX_Gpio0pineventtrig0ToSmartdmatrig





enumerator kINPUTMUX_Gpio1pineventtrig0ToSmartdmatrig





enumerator kINPUTMUX_Gpio2pineventtrig0ToSmartdmatrig





enumerator kINPUTMUX_Gpio3pineventtrig0ToSmartdmatrig





enumerator kINPUTMUX_Gpio4pineventtrig0ToSmartdmatrig





enumerator kINPUTMUX_ArmtxevToSmartdmatrig





enumerator kINPUTMUX_Aoi0out0ToSmartdmatrig





enumerator kINPUTMUX_Dma0irqToSmartdmatrig





enumerator kINPUTMUX_WuuirqToSmartdmatrig





enumerator kINPUTMUX_Ctimer0mat2ToSmartdmatrig





enumerator kINPUTMUX_Ctimer0mat3ToSmartdmatrig





enumerator kINPUTMUX_Ctimer1mat2ToSmartdmatrig





enumerator kINPUTMUX_Ctimer1mat3ToSmartdmatrig





enumerator kINPUTMUX_Ctimer2mat2ToSmartdmatrig





enumerator kINPUTMUX_Ctimer2mat3ToSmartdmatrig





enumerator kINPUTMUX_Ctimer3mat2ToSmartdmatrig





enumerator kINPUTMUX_Ctimer3mat3ToSmartdmatrig





enumerator kINPUTMUX_Ctimer4mat2ToSmartdmatrig





enumerator kINPUTMUX_Ctimer4mat3ToSmartdmatrig





enumerator kINPUTMUX_OstimerirqToSmartdmatrig





enumerator kINPUTMUX_RtcirqToSmartdmatrig





enumerator kINPUTMUX_UtickirqToSmartdmatrig





enumerator kINPUTMUX_WdtirqToSmartdmatrig





enumerator kINPUTMUX_WakeuptimerirqToSmartdmatrig





enumerator kINPUTMUX_Can0irqToSmartdmatrig





enumerator kINPUTMUX_Can1irqToSmartdmatrig





enumerator kINPUTMUX_Flexio0irqToSmartdmatrig





enumerator kINPUTMUX_Flexio0shifer0dmareqToSmartdmatrig





enumerator kINPUTMUX_Flexio0shifer1dmareqToSmartdmatrig





enumerator kINPUTMUX_Flexio0shifer2dmareqToSmartdmatrig





enumerator kINPUTMUX_Flexio0shifer3dmareqToSmartdmatrig





enumerator kINPUTMUX_I3c0irqToSmartdmatrig





enumerator kINPUTMUX_Lpi2c0irqToSmartdmatrig





enumerator kINPUTMUX_Lpi2c1irqToSmartdmatrig





enumerator kINPUTMUX_Lpspi0irqToSmartdmatrig





enumerator kINPUTMUX_Lpspi1irqToSmartdmatrig





enumerator kINPUTMUX_Lpuart0irqToSmartdmatrig





enumerator kINPUTMUX_Lpuart1irqToSmartdmatrig





enumerator kINPUTMUX_Lpuart2irqToSmartdmatrig





enumerator kINPUTMUX_Lpuart3irqToSmartdmatrig





enumerator kINPUTMUX_Usb1startofframeToSmartdmatrig





enumerator kINPUTMUX_Adc0irqToSmartdmatrig





enumerator kINPUTMUX_Adc1irqToSmartdmatrig





enumerator kINPUTMUX_Cmp0irqToSmartdmatrig





enumerator kINPUTMUX_Cmp0outToSmartdmatrig





enumerator kINPUTMUX_Dac0irqToSmartdmatrig





enumerator kINPUTMUX_Dma1irqToSmartdmatrig





enumerator kINPUTMUX_Dac1irqToSmartdmatrig





enumerator kINPUTMUX_Tsi0endofscanirqToSmartdmatrig





enumerator kINPUTMUX_Tsi0outofrangeirqToSmartdmatrig





enumerator kINPUTMUX_EnetqosirqToSmartdmatrig





enumerator kINPUTMUX_Tenbaset1sirqToSmartdmatrig





enumerator kINPUTMUX_ErminterruptToSmartdmatrig





enumerator kINPUTMUX_Tmprout0ToSmartdmatrig





enumerator kINPUTMUX_Tmprout1ToSmartdmatrig







typedef enum _inputmux_index_t inputmux_index_t





typedef enum _inputmux_connection_t inputmux_connection_t

INPUTMUX connections type. 




CTIMER0CAP_REG

Periphinmux IDs. 




TIMER0TRIG_REG





CTIMER1CAP_REG





TIMER1TRIG_REG





CTIMER2CAP_REG





TIMER2TRIG_REG





SMARTDMA_TRIG_REG





LPSPI2_TRIG_REG





LPSPI3_TRIG_REG





LPSPI4_TRIG_REG





LPSPI5_TRIG_REG





ENET_TRIG_IN_REG





T1S_WKUP_REG





FREQMEAS_REF_REG





FREQMEAS_TAR_REG





CTIMER3CAP_REG





TIMER3TRIG_REG





CTIMER4CAP_REG





TIMER4TRIG_REG





CMP0_TRIG_REG





ADC0_TRIG_REG





ADC1_TRIG_REG





DAC0_TRIG_REG





DAC1_TRIG_REG





AOI0_INPUT_REG





TSI0_TRIG_INPUT_REG





TRIG_OUT_REG





LPI2C2_TRIG_REG





LPI2C3_TRIG_REG





LPI2C4_TRIG_REG





LPI2C0_TRIG_REG





LPI2C1_TRIG_REG





LPSPI0_TRIG_REG





LPSPI1_TRIG_REG





LPUART0_REG





LPUART1_REG





LPUART2_REG





LPUART3_REG





LPUART4_REG





LPUART5_REG





FLEXIO_TRIG_REG





PMUX_SHIFT





FSL_INPUTMUX_DRIVER_VERSION

Group interrupt driver version for SDK. 




void INPUTMUX_Init(void *base)

Initialize INPUTMUX peripheral. 
This function enables the INPUTMUX clock.

Parameters:

base – Base address of the INPUTMUX peripheral.


Return values:
None. – 






void INPUTMUX_AttachSignal(void *base, uint16_t index, inputmux_connection_t connection)

Attaches a signal. 
This function attaches multiplexed signals from INPUTMUX to target signals. For example, to attach GPIO PORT0 Pin 5 to PINT peripheral, do the following: 
INPUTMUX_AttachSignal(INPUTMUX, 2, kINPUTMUX_GpioPort0Pin5ToPintsel);


 In this example, INTMUX has 8 registers for PINT, PINT_SEL0~PINT_SEL7. With parameter index specified as 2, this function configures register PINT_SEL2.

Parameters:

base – Base address of the INPUTMUX peripheral. 
index – The serial number of destination register in the group of INPUTMUX registers with same name. 
connection – Applies signal from source signals collection to target signal.


Return values:
None. – 






void INPUTMUX_Deinit(void *base)

Deinitialize INPUTMUX peripheral. 
This function disables the INPUTMUX clock.

Parameters:

base – Base address of the INPUTMUX peripheral.


Return values:
None. – 






KB Driver#


enum kb_operation_t

Details of the operation to be performed by the ROM. 
The kRomAuthenticateImage operation requires the entire signed image to be available to the application. 
Values:


enumerator kRomAuthenticateImage

Authenticate a signed image. 




enumerator kRomLoadImage

Load SB file. 




enumerator kRomOperationCount








Values:


enumerator kStatus_RomLdrDataUnderrun

API needs to be called again with more data(next data chunk) 




enumerator kStatus_RomLdrJumpReturned

API finished its execution but the jump to user code returned 




enumerator kStatus_RomLdrRollbackBlocked

New firmware version is lesser than the present one 




enumerator kStatus_RomLdrPendingJumpCommand

Returned by kb_execute; Call of kb_finish is needed to do the requested jump 




enumerator kStatus_RomApiBufferSizeNotEnough

API cannot proceed because the provided buffer(via call of
kb_init in options argument) is not large enough





enumerator kStatus_RomApiInvalidBuffer

API cannot proceed because the provided buffer pointer is NULL or buffer size is 0 






typedef struct kb_buffer_desc_tag kb_buffer_desc_t





typedef struct kb_opaque_session_ref_tag kb_session_ref_t





status_t KB_Init(kb_session_ref_t **session, const kb_options_t *options)

This API is used to initialize bootloader and nboot context necessary to process sb4 file format. 

Parameters:

session – A double pointer to a kb_session_ref_t object where the initialized session reference will be stored. 
options – A pointer to a kb_options_t structure containing configuration settings for initializing the session. 







status_t KB_Deinit(kb_session_ref_t *session)

This API is used to release nboot context and finalize sb4 file processing. 

Parameters:

session – A pointer to an existing kb_session_ref_t session object that should be released and deinitialized. 







status_t KB_Execute(kb_session_ref_t *session, const uint8_t *data, uint32_t dataLength)

This API is used to decrypt sb4 file and store signed image contents specified by loader command supported while generating sb4 image through Json configuration. 

Parameters:

session – Session pointer obtained from kb_init function. 
data – Pointer to sb file data.. 
dataLength – sb file data length in bytes. 







FSL_KBAPI_DRIVER_VERSION

KBAPI driver version 2.0.0. 




uint32_t address





uint32_t length





uint32_t profile





uint32_t minBuildNumber





uint32_t overrideSBBootSectionID





uint32_t *userSBKEK





uint32_t regionCount





const kb_region_t *regions





uint32_t profile





uint32_t minBuildNumber





uint32_t maxImageLength





uint32_t *userRHK





uint32_t version

Should be set to kKbootApiVersion. 




uint8_t *buffer

Caller-provided buffer used by Kboot. 




uint32_t bufferLength





kb_operation_t op





kb_authenticate_t authenticate

Settings for kb_authenticate_t operation. 




kb_load_sb_t loadSB

Settings for kb_load_sb_t operation. 




union kb_options_t




uint8_t *buf





uint32_t len





uint32_t allocated





kb_options_t options





kb_buffer_desc_t buffer_desc





void *op_context





struct kb_region_t


#include <fsl_kbapi.h>
Memory region definition. 




struct kb_load_sb_t





struct kb_authenticate_t





struct kb_options_t





struct kb_buffer_desc_tag





struct kb_opaque_session_ref_tag





union __unnamed31__


Public Members


kb_authenticate_t authenticate

Settings for kb_authenticate_t operation. 




kb_load_sb_t loadSB

Settings for kb_load_sb_t operation. 







Common Driver#


FSL_COMMON_DRIVER_VERSION

common driver version. 




DEBUG_CONSOLE_DEVICE_TYPE_NONE

No debug console. 




DEBUG_CONSOLE_DEVICE_TYPE_UART

Debug console based on UART. 




DEBUG_CONSOLE_DEVICE_TYPE_LPUART

Debug console based on LPUART. 




DEBUG_CONSOLE_DEVICE_TYPE_LPSCI

Debug console based on LPSCI. 




DEBUG_CONSOLE_DEVICE_TYPE_USBCDC

Debug console based on USBCDC. 




DEBUG_CONSOLE_DEVICE_TYPE_FLEXCOMM

Debug console based on FLEXCOMM. 




DEBUG_CONSOLE_DEVICE_TYPE_IUART

Debug console based on i.MX UART. 




DEBUG_CONSOLE_DEVICE_TYPE_VUSART

Debug console based on LPC_VUSART. 




DEBUG_CONSOLE_DEVICE_TYPE_MINI_USART

Debug console based on LPC_USART. 




DEBUG_CONSOLE_DEVICE_TYPE_SWO

Debug console based on SWO. 




DEBUG_CONSOLE_DEVICE_TYPE_QSCI

Debug console based on QSCI. 




MIN(a, b)

Computes the minimum of a and b. 




MAX(a, b)

Computes the maximum of a and b. 




UINT16_MAX

Max value of uint16_t type. 




UINT32_MAX

Max value of uint32_t type. 




MCUX_MASK_INVERT_8(mask)

8-bit mask inversion. 




MCUX_MASK_INVERT_16(mask)

16-bit mask inversion. 




MCUX_MASK_INVERT_32(mask)

32-bit mask inversion for completeness. 




MCUX_REG_WRITE8(reg, value)

8-bit register write macro 




MCUX_REG_WRITE16(reg, value)

16-bit register write macro 




MCUX_REG_WRITE32(reg, value)

32-bit register write macro 




MCUX_REG_READ8(reg)

8-bit register read macro 




MCUX_REG_READ16(reg)

16-bit register read macro 




MCUX_REG_READ32(reg)

32-bit register read macro 




MCUX_REG_BIT_SET8(reg, mask)

8-bit register bit set macro 




MCUX_REG_BIT_SET16(reg, mask)

16-bit register bit set macro 




MCUX_REG_BIT_SET32(reg, mask)

32-bit register bit set macro 




MCUX_REG_BIT_CLEAR8(reg, mask)

8-bit register bit clear macro 




MCUX_REG_BIT_CLEAR16(reg, mask)

16-bit register bit clear macro 




MCUX_REG_BIT_CLEAR32(reg, mask)

32-bit register bit clear macro 




MCUX_REG_BIT_GET8(reg, mask)

8-bit register bit get macro 




MCUX_REG_BIT_GET16(reg, mask)

16-bit register bit get macro 




MCUX_REG_BIT_GET32(reg, mask)

32-bit register bit get macro 




MCUX_REG_MODIFY8(reg, mask, value)

32-bit register read-modify-write macro 




MCUX_REG_MODIFY16(reg, mask, value)

16-bit register read-modify-write macro 




MCUX_REG_MODIFY32(reg, mask, value)

32-bit register read-modify-write macro 




SDK_ATOMIC_LOCAL_ADD(addr, val)

Add value val from the variable at address address. 




SDK_ATOMIC_LOCAL_SUB(addr, val)

Subtract value val to the variable at address address. 




SDK_ATOMIC_LOCAL_SET(addr, bits)

Set the bits specifiled by bits to the variable at address address. 




SDK_ATOMIC_LOCAL_CLEAR(addr, bits)

Clear the bits specifiled by bits to the variable at address address. 




SDK_ATOMIC_LOCAL_TOGGLE(addr, bits)

Toggle the bits specifiled by bits to the variable at address address. 




SDK_ATOMIC_LOCAL_CLEAR_AND_SET(addr, clearBits, setBits)

For the variable at address address, clear the bits specifiled by clearBits and set the bits specifiled by setBits. 




SDK_ATOMIC_LOCAL_COMPARE_AND_SET(addr, expected, newValue)

For the variable at address address, check whether the value equal to expected. If value same as expected then update newValue to address and return true , else return false . 




SDK_ATOMIC_LOCAL_TEST_AND_SET(addr, newValue)

For the variable at address address, set as newValue value and return old value. 




USEC_TO_COUNT(us, clockFreqInHz)

Macro to convert a microsecond period to raw count value 




COUNT_TO_USEC(count, clockFreqInHz)

Macro to convert a raw count value to microsecond 




MSEC_TO_COUNT(ms, clockFreqInHz)

Macro to convert a millisecond period to raw count value 




COUNT_TO_MSEC(count, clockFreqInHz)

Macro to convert a raw count value to millisecond 




SDK_ISR_EXIT_BARRIER





SDK_ALIGN(var, alignbytes)

Macro to define a variable with alignbytes alignment 




SDK_SIZEALIGN(var, alignbytes)

Macro to define a variable with L1 d-cache line size alignment
Macro to define a variable with L2 cache line size alignment
Macro to change a value to a given size aligned value (rounded up) 




SDK_SIZEALIGN_UP(var, alignbytes)

Macro to change a value to a given size aligned value (rounded up), the wrapper of SDK_SIZEALIGN 




SDK_SIZEALIGN_DOWN(var, alignbytes)

Macro to change a value to a given size aligned value (rounded down) 




SDK_IS_ALIGNED(var, alignbytes)

Macro to check if a value is aligned to a given size 




AT_NONCACHEABLE_SECTION(var)

Define a variable var, and place it in non-cacheable section. 




AT_NONCACHEABLE_SECTION_ALIGN(var, alignbytes)

Define a variable var, and place it in non-cacheable section, the start address of the variable is aligned to alignbytes. 




AT_NONCACHEABLE_SECTION_INIT(var)

Define a variable var with initial value, and place it in non-cacheable section. 




AT_NONCACHEABLE_SECTION_ALIGN_INIT(var, alignbytes)

Define a variable var with initial value, and place it in non-cacheable section, the start address of the variable is aligned to alignbytes. 




AT_CACHE_LINE_SECTION(var)

Define a variable var, which is cache line size aligned and be placed in CacheLineData section. 




AT_CACHE_LINE_SECTION_INIT(var)

Define a variable var with initial value, which is cache line size aligned and be placed in CacheLineData.init section. 




AT_QUICKACCESS_SECTION_CODE(func)

Place function in a section which can be accessed quickly by core. 




AT_QUICKACCESS_SECTION_DATA(var)

Place data in a section which can be accessed quickly by core. 




AT_QUICKACCESS_SECTION_DATA_ALIGN(var, alignbytes)

Place data in a section which can be accessed quickly by core, and the variable address is set to align with alignbytes. 




MCUX_RAMFUNC

Function attribute to place function in RAM. For example, to place function my_func in ram, use like: 
MCUX_RAMFUNC my_func







RAMFUNCTION_SECTION_CODE(func)

Place function in ram. 




enum _status_groups

Status group numbers. 
Values:


enumerator kStatusGroup_Generic

Group number for generic status codes. 




enumerator kStatusGroup_FLASH

Group number for FLASH status codes. 




enumerator kStatusGroup_LPSPI

Group number for LPSPI status codes. 




enumerator kStatusGroup_FLEXIO_SPI

Group number for FLEXIO SPI status codes. 




enumerator kStatusGroup_DSPI

Group number for DSPI status codes. 




enumerator kStatusGroup_FLEXIO_UART

Group number for FLEXIO UART status codes. 




enumerator kStatusGroup_FLEXIO_I2C

Group number for FLEXIO I2C status codes. 




enumerator kStatusGroup_LPI2C

Group number for LPI2C status codes. 




enumerator kStatusGroup_UART

Group number for UART status codes. 




enumerator kStatusGroup_I2C

Group number for UART status codes. 




enumerator kStatusGroup_LPSCI

Group number for LPSCI status codes. 




enumerator kStatusGroup_LPUART

Group number for LPUART status codes. 




enumerator kStatusGroup_SPI

Group number for SPI status code. 




enumerator kStatusGroup_XRDC

Group number for XRDC status code. 




enumerator kStatusGroup_SEMA42

Group number for SEMA42 status code. 




enumerator kStatusGroup_SDHC

Group number for SDHC status code 




enumerator kStatusGroup_SDMMC

Group number for SDMMC status code 




enumerator kStatusGroup_SAI

Group number for SAI status code 




enumerator kStatusGroup_MCG

Group number for MCG status codes. 




enumerator kStatusGroup_SCG

Group number for SCG status codes. 




enumerator kStatusGroup_SDSPI

Group number for SDSPI status codes. 




enumerator kStatusGroup_FLEXIO_I2S

Group number for FLEXIO I2S status codes 




enumerator kStatusGroup_FLEXIO_MCULCD

Group number for FLEXIO LCD status codes 




enumerator kStatusGroup_FLASHIAP

Group number for FLASHIAP status codes 




enumerator kStatusGroup_FLEXCOMM_I2C

Group number for FLEXCOMM I2C status codes 




enumerator kStatusGroup_I2S

Group number for I2S status codes 




enumerator kStatusGroup_IUART

Group number for IUART status codes 




enumerator kStatusGroup_CSI

Group number for CSI status codes 




enumerator kStatusGroup_MIPI_DSI

Group number for MIPI DSI status codes 




enumerator kStatusGroup_SDRAMC

Group number for SDRAMC status codes. 




enumerator kStatusGroup_POWER

Group number for POWER status codes. 




enumerator kStatusGroup_ENET

Group number for ENET status codes. 




enumerator kStatusGroup_PHY

Group number for PHY status codes. 




enumerator kStatusGroup_TRGMUX

Group number for TRGMUX status codes. 




enumerator kStatusGroup_SMARTCARD

Group number for SMARTCARD status codes. 




enumerator kStatusGroup_LMEM

Group number for LMEM status codes. 




enumerator kStatusGroup_QSPI

Group number for QSPI status codes. 




enumerator kStatusGroup_DMA

Group number for DMA status codes. 




enumerator kStatusGroup_EDMA

Group number for EDMA status codes. 




enumerator kStatusGroup_DMAMGR

Group number for DMAMGR status codes. 




enumerator kStatusGroup_FLEXCAN

Group number for FlexCAN status codes. 




enumerator kStatusGroup_LTC

Group number for LTC status codes. 




enumerator kStatusGroup_FLEXIO_CAMERA

Group number for FLEXIO CAMERA status codes. 




enumerator kStatusGroup_LPC_SPI

Group number for LPC_SPI status codes. 




enumerator kStatusGroup_LPC_USART

Group number for LPC_USART status codes. 




enumerator kStatusGroup_DMIC

Group number for DMIC status codes. 




enumerator kStatusGroup_SDIF

Group number for SDIF status codes. 




enumerator kStatusGroup_SPIFI

Group number for SPIFI status codes. 




enumerator kStatusGroup_OTP

Group number for OTP status codes. 




enumerator kStatusGroup_MCAN

Group number for MCAN status codes. 




enumerator kStatusGroup_CAAM

Group number for CAAM status codes. 




enumerator kStatusGroup_ECSPI

Group number for ECSPI status codes. 




enumerator kStatusGroup_USDHC

Group number for USDHC status codes. 




enumerator kStatusGroup_LPC_I2C

Group number for LPC_I2C status codes. 




enumerator kStatusGroup_DCP

Group number for DCP status codes. 




enumerator kStatusGroup_MSCAN

Group number for MSCAN status codes. 




enumerator kStatusGroup_ESAI

Group number for ESAI status codes. 




enumerator kStatusGroup_FLEXSPI

Group number for FLEXSPI status codes. 




enumerator kStatusGroup_MMDC

Group number for MMDC status codes. 




enumerator kStatusGroup_PDM

Group number for MIC status codes. 




enumerator kStatusGroup_SDMA

Group number for SDMA status codes. 




enumerator kStatusGroup_ICS

Group number for ICS status codes. 




enumerator kStatusGroup_SPDIF

Group number for SPDIF status codes. 




enumerator kStatusGroup_LPC_MINISPI

Group number for LPC_MINISPI status codes. 




enumerator kStatusGroup_HASHCRYPT

Group number for Hashcrypt status codes 




enumerator kStatusGroup_LPC_SPI_SSP

Group number for LPC_SPI_SSP status codes. 




enumerator kStatusGroup_I3C

Group number for I3C status codes 




enumerator kStatusGroup_LPC_I2C_1

Group number for LPC_I2C_1 status codes. 




enumerator kStatusGroup_NOTIFIER

Group number for NOTIFIER status codes. 




enumerator kStatusGroup_DebugConsole

Group number for debug console status codes. 




enumerator kStatusGroup_SEMC

Group number for SEMC status codes. 




enumerator kStatusGroup_ApplicationRangeStart

Starting number for application groups. 




enumerator kStatusGroup_IAP

Group number for IAP status codes 




enumerator kStatusGroup_SFA

Group number for SFA status codes 




enumerator kStatusGroup_SPC

Group number for SPC status codes. 




enumerator kStatusGroup_PUF

Group number for PUF status codes. 




enumerator kStatusGroup_TOUCH_PANEL

Group number for touch panel status codes 




enumerator kStatusGroup_VBAT

Group number for VBAT status codes 




enumerator kStatusGroup_XSPI

Group number for XSPI status codes 




enumerator kStatusGroup_PNGDEC

Group number for PNGDEC status codes 




enumerator kStatusGroup_JPEGDEC

Group number for JPEGDEC status codes 




enumerator kStatusGroup_AUDMIX

Group number for AUDMIX status codes 




enumerator kStatusGroup_HAL_GPIO

Group number for HAL GPIO status codes. 




enumerator kStatusGroup_HAL_UART

Group number for HAL UART status codes. 




enumerator kStatusGroup_HAL_TIMER

Group number for HAL TIMER status codes. 




enumerator kStatusGroup_HAL_SPI

Group number for HAL SPI status codes. 




enumerator kStatusGroup_HAL_I2C

Group number for HAL I2C status codes. 




enumerator kStatusGroup_HAL_FLASH

Group number for HAL FLASH status codes. 




enumerator kStatusGroup_HAL_PWM

Group number for HAL PWM status codes. 




enumerator kStatusGroup_HAL_RNG

Group number for HAL RNG status codes. 




enumerator kStatusGroup_HAL_I2S

Group number for HAL I2S status codes. 




enumerator kStatusGroup_HAL_ADC_SENSOR

Group number for HAL ADC SENSOR status codes. 




enumerator kStatusGroup_TIMERMANAGER

Group number for TiMER MANAGER status codes. 




enumerator kStatusGroup_SERIALMANAGER

Group number for SERIAL MANAGER status codes. 




enumerator kStatusGroup_LED

Group number for LED status codes. 




enumerator kStatusGroup_BUTTON

Group number for BUTTON status codes. 




enumerator kStatusGroup_EXTERN_EEPROM

Group number for EXTERN EEPROM status codes. 




enumerator kStatusGroup_SHELL

Group number for SHELL status codes. 




enumerator kStatusGroup_MEM_MANAGER

Group number for MEM MANAGER status codes. 




enumerator kStatusGroup_LIST

Group number for List status codes. 




enumerator kStatusGroup_OSA

Group number for OSA status codes. 




enumerator kStatusGroup_COMMON_TASK

Group number for Common task status codes. 




enumerator kStatusGroup_MSG

Group number for messaging status codes. 




enumerator kStatusGroup_SDK_OCOTP

Group number for OCOTP status codes. 




enumerator kStatusGroup_SDK_FLEXSPINOR

Group number for FLEXSPINOR status codes. 




enumerator kStatusGroup_CODEC

Group number for codec status codes. 




enumerator kStatusGroup_ASRC

Group number for codec status ASRC. 




enumerator kStatusGroup_OTFAD

Group number for codec status codes. 




enumerator kStatusGroup_SDIOSLV

Group number for SDIOSLV status codes. 




enumerator kStatusGroup_MECC

Group number for MECC status codes. 




enumerator kStatusGroup_ENET_QOS

Group number for ENET_QOS status codes. 




enumerator kStatusGroup_LOG

Group number for LOG status codes. 




enumerator kStatusGroup_I3CBUS

Group number for I3CBUS status codes. 




enumerator kStatusGroup_QSCI

Group number for QSCI status codes. 




enumerator kStatusGroup_ELEMU

Group number for ELEMU status codes. 




enumerator kStatusGroup_QUEUEDSPI

Group number for QSPI status codes. 




enumerator kStatusGroup_POWER_MANAGER

Group number for POWER_MANAGER status codes. 




enumerator kStatusGroup_IPED

Group number for IPED status codes. 




enumerator kStatusGroup_ELS_PKC

Group number for ELS PKC status codes. 




enumerator kStatusGroup_CSS_PKC

Group number for CSS PKC status codes. 




enumerator kStatusGroup_HOSTIF

Group number for HOSTIF status codes. 




enumerator kStatusGroup_CLIF

Group number for CLIF status codes. 




enumerator kStatusGroup_BMA

Group number for BMA status codes. 




enumerator kStatusGroup_NETC

Group number for NETC status codes. 




enumerator kStatusGroup_ELE

Group number for ELE status codes. 




enumerator kStatusGroup_GLIKEY

Group number for GLIKEY status codes. 




enumerator kStatusGroup_AON_POWER

Group number for AON_POWER status codes. 




enumerator kStatusGroup_AON_COMMON

Group number for AON_COMMON status codes. 




enumerator kStatusGroup_ENDAT3

Group number for ENDAT3 status codes. 




enumerator kStatusGroup_HIPERFACE

Group number for HIPERFACE status codes. 




enumerator kStatusGroup_NPX

Group number for NPX status codes. 




enumerator kStatusGroup_ELA_CSEC

Group number for ELA_CSEC status codes. 




enumerator kStatusGroup_FLEXIO_T_FORMAT

Group number for T-format status codes. 




enumerator kStatusGroup_FLEXIO_A_FORMAT

Group number for A-format status codes. 




enumerator kStatusGroup_LPC_QSPI

Group number for LPC QSPI status codes. 







Generic status return codes. 
Values:


enumerator kStatus_Success

Generic status for Success. 




enumerator kStatus_Fail

Generic status for Fail. 




enumerator kStatus_ReadOnly

Generic status for read only failure. 




enumerator kStatus_OutOfRange

Generic status for out of range access. 




enumerator kStatus_InvalidArgument

Generic status for invalid argument check. 




enumerator kStatus_Timeout

Generic status for timeout. 




enumerator kStatus_NoTransferInProgress

Generic status for no transfer in progress. 




enumerator kStatus_Busy

Generic status for module is busy. 




enumerator kStatus_NoData

Generic status for no data is found for the operation. 






typedef int32_t status_t

Type used for all status and error return values. 




void *SDK_Malloc(size_t size, size_t alignbytes)

Allocate memory with given alignment and aligned size. 
This is provided to support the dynamically allocated memory used in cache-able region. 

Parameters:

size – The length required to malloc. 
alignbytes – The alignment size. 


Return values:
The – allocated memory. 






void SDK_Free(void *ptr)

Free memory. 

Parameters:

ptr – The memory to be release. 







void SDK_DelayAtLeastUs(uint32_t delayTime_us, uint32_t coreClock_Hz)

Delay at least for some time. Please note that, this API uses while loop for delay, different run-time environments make the time not precise, if precise delay count was needed, please implement a new delay function with hardware timer. 

Parameters:

delayTime_us – Delay time in unit of microsecond. 
coreClock_Hz – Core clock frequency with Hz. 







static inline status_t EnableIRQ(IRQn_Type interrupt)

Enable specific interrupt. 
Enable LEVEL1 interrupt. For some devices, there might be multiple interrupt levels. For example, there are NVIC and intmux. Here the interrupts connected to NVIC are the LEVEL1 interrupts, because they are routed to the core directly. The interrupts connected to intmux are the LEVEL2 interrupts, they are routed to NVIC first then routed to core.
This function only enables the LEVEL1 interrupts. The number of LEVEL1 interrupts is indicated by the feature macro FSL_FEATURE_NUMBER_OF_LEVEL1_INT_VECTORS.

Parameters:

interrupt – The IRQ number. 


Return values:

kStatus_Success – Interrupt enabled successfully 
kStatus_Fail – Failed to enable the interrupt 







static inline status_t DisableIRQ(IRQn_Type interrupt)

Disable specific interrupt. 
Disable LEVEL1 interrupt. For some devices, there might be multiple interrupt levels. For example, there are NVIC and intmux. Here the interrupts connected to NVIC are the LEVEL1 interrupts, because they are routed to the core directly. The interrupts connected to intmux are the LEVEL2 interrupts, they are routed to NVIC first then routed to core.
This function only disables the LEVEL1 interrupts. The number of LEVEL1 interrupts is indicated by the feature macro FSL_FEATURE_NUMBER_OF_LEVEL1_INT_VECTORS.

Parameters:

interrupt – The IRQ number. 


Return values:

kStatus_Success – Interrupt disabled successfully 
kStatus_Fail – Failed to disable the interrupt 







static inline status_t EnableIRQWithPriority(IRQn_Type interrupt, uint8_t priNum)

Enable the IRQ, and also set the interrupt priority. 
Only handle LEVEL1 interrupt. For some devices, there might be multiple interrupt levels. For example, there are NVIC and intmux. Here the interrupts connected to NVIC are the LEVEL1 interrupts, because they are routed to the core directly. The interrupts connected to intmux are the LEVEL2 interrupts, they are routed to NVIC first then routed to core.
This function only handles the LEVEL1 interrupts. The number of LEVEL1 interrupts is indicated by the feature macro FSL_FEATURE_NUMBER_OF_LEVEL1_INT_VECTORS.

Parameters:

interrupt – The IRQ to Enable. 
priNum – Priority number set to interrupt controller register. 


Return values:

kStatus_Success – Interrupt priority set successfully 
kStatus_Fail – Failed to set the interrupt priority. 







static inline status_t IRQ_SetPriority(IRQn_Type interrupt, uint8_t priNum)

Set the IRQ priority. 
Only handle LEVEL1 interrupt. For some devices, there might be multiple interrupt levels. For example, there are NVIC and intmux. Here the interrupts connected to NVIC are the LEVEL1 interrupts, because they are routed to the core directly. The interrupts connected to intmux are the LEVEL2 interrupts, they are routed to NVIC first then routed to core.
This function only handles the LEVEL1 interrupts. The number of LEVEL1 interrupts is indicated by the feature macro FSL_FEATURE_NUMBER_OF_LEVEL1_INT_VECTORS.

Parameters:

interrupt – The IRQ to set. 
priNum – Priority number set to interrupt controller register.


Return values:

kStatus_Success – Interrupt priority set successfully 
kStatus_Fail – Failed to set the interrupt priority. 







static inline status_t IRQ_ClearPendingIRQ(IRQn_Type interrupt)

Clear the pending IRQ flag. 
Only handle LEVEL1 interrupt. For some devices, there might be multiple interrupt levels. For example, there are NVIC and intmux. Here the interrupts connected to NVIC are the LEVEL1 interrupts, because they are routed to the core directly. The interrupts connected to intmux are the LEVEL2 interrupts, they are routed to NVIC first then routed to core.
This function only handles the LEVEL1 interrupts. The number of LEVEL1 interrupts is indicated by the feature macro FSL_FEATURE_NUMBER_OF_LEVEL1_INT_VECTORS.

Parameters:

interrupt – The flag which IRQ to clear.


Return values:

kStatus_Success – Interrupt priority set successfully 
kStatus_Fail – Failed to set the interrupt priority. 







static inline uint32_t DisableGlobalIRQ(void)

Disable the global IRQ. 
Disable the global interrupt and return the current primask register. User is required to provided the primask register for the EnableGlobalIRQ().

Returns:
Current primask value. 






static inline void EnableGlobalIRQ(uint32_t primask)

Enable the global IRQ. 
Set the primask register with the provided primask value but not just enable the primask. The idea is for the convenience of integration of RTOS. some RTOS get its own management mechanism of primask. User is required to use the EnableGlobalIRQ() and DisableGlobalIRQ() in pair.

Parameters:

primask – value of primask register to be restored. The primask value is supposed to be provided by the DisableGlobalIRQ(). 







static inline bool _SDK_AtomicLocalCompareAndSet(uint32_t *addr, uint32_t expected, uint32_t newValue)





static inline uint32_t _SDK_AtomicTestAndSet(uint32_t *addr, uint32_t newValue)





FSL_DRIVER_TRANSFER_DOUBLE_WEAK_IRQ

Macro to use the default weak IRQ handler in drivers. 




MAKE_STATUS(group, code)

Construct a status code value from a group and code number. 




MAKE_VERSION(major, minor, bugfix)

Construct the version number for drivers. 
The driver version is a 32-bit number, for both 32-bit platforms(such as Cortex M) and 16-bit platforms(such as DSC).
| Unused    || Major Version || Minor Version ||  Bug Fix    |
31        25  24           17  16            9  8            0






ARRAY_SIZE(x)

Computes the number of elements in an array. 




UINT64_H(X)

Macro to get upper 32 bits of a 64-bit value 




UINT64_L(X)

Macro to get lower 32 bits of a 64-bit value 




SUPPRESS_FALL_THROUGH_WARNING()

For switch case code block, if case section ends without “break;” statement, there wil be fallthrough warning with compiler flag -Wextra or -Wimplicit-fallthrough=n when using armgcc. To suppress this warning, “SUPPRESS_FALL_THROUGH_WARNING();” need to be added at the end of each case section which misses “break;”statement. 




MSDK_REG_SECURE_ADDR(x)

Convert the register address to the one used in secure mode. 




MSDK_REG_NONSECURE_ADDR(x)

Convert the register address to the one used in non-secure mode. 




MSDK_HAS_DWT_CYCCNT

The chip supports DWT CYCCNT or not. 




MSDK_INVALID_IRQ_HANDLER

Invalid IRQ handler address. 




LPADC: 12-bit SAR Analog-to-Digital Converter Driver#


enum _lpadc_status_flags

Define hardware flags of the module. 
Values:


enumerator kLPADC_ResultFIFO0OverflowFlag

Indicates that more data has been written to the Result FIFO 0 than it can hold. 




enumerator kLPADC_ResultFIFO0ReadyFlag

Indicates when the number of valid datawords in the result FIFO 0 is greater than the setting watermark level. 




enumerator kLPADC_TriggerExceptionFlag

Indicates that a trigger exception event has occurred. 




enumerator kLPADC_TriggerCompletionFlag

Indicates that a trigger completion event has occurred. 




enumerator kLPADC_CalibrationReadyFlag

Indicates that the calibration process is done. 




enumerator kLPADC_ActiveFlag

Indicates that the ADC is in active state. 




enumerator kLPADC_ResultFIFOOverflowFlag

To compilitable with old version, do not recommend using this, please use kLPADC_ResultFIFO0OverflowFlag as instead. 




enumerator kLPADC_ResultFIFOReadyFlag

To compilitable with old version, do not recommend using this, please use kLPADC_ResultFIFO0ReadyFlag as instead. 






enum _lpadc_interrupt_enable

Define interrupt switchers of the module. 
Note: LPADC of different chips supports different number of trigger sources, please check the Reference Manual for details. 
Values:


enumerator kLPADC_ResultFIFO0OverflowInterruptEnable

Configures ADC to generate overflow interrupt requests when FOF0 flag is asserted. 




enumerator kLPADC_FIFO0WatermarkInterruptEnable

Configures ADC to generate watermark interrupt requests when RDY0 flag is asserted. 




enumerator kLPADC_ResultFIFOOverflowInterruptEnable

To compilitable with old version, do not recommend using this, please use kLPADC_ResultFIFO0OverflowInterruptEnable as instead. 




enumerator kLPADC_FIFOWatermarkInterruptEnable

To compilitable with old version, do not recommend using this, please use kLPADC_FIFO0WatermarkInterruptEnable as instead. 




enumerator kLPADC_TriggerExceptionInterruptEnable

Configures ADC to generate trigger exception interrupt. 




enumerator kLPADC_Trigger0CompletionInterruptEnable

Configures ADC to generate interrupt when trigger 0 completion. 




enumerator kLPADC_Trigger1CompletionInterruptEnable

Configures ADC to generate interrupt when trigger 1 completion. 




enumerator kLPADC_Trigger2CompletionInterruptEnable

Configures ADC to generate interrupt when trigger 2 completion. 




enumerator kLPADC_Trigger3CompletionInterruptEnable

Configures ADC to generate interrupt when trigger 3 completion. 




enumerator kLPADC_Trigger4CompletionInterruptEnable

Configures ADC to generate interrupt when trigger 4 completion. 




enumerator kLPADC_Trigger5CompletionInterruptEnable

Configures ADC to generate interrupt when trigger 5 completion. 




enumerator kLPADC_Trigger6CompletionInterruptEnable

Configures ADC to generate interrupt when trigger 6 completion. 




enumerator kLPADC_Trigger7CompletionInterruptEnable

Configures ADC to generate interrupt when trigger 7 completion. 




enumerator kLPADC_Trigger8CompletionInterruptEnable

Configures ADC to generate interrupt when trigger 8 completion. 




enumerator kLPADC_Trigger9CompletionInterruptEnable

Configures ADC to generate interrupt when trigger 9 completion. 




enumerator kLPADC_Trigger10CompletionInterruptEnable

Configures ADC to generate interrupt when trigger 10 completion. 




enumerator kLPADC_Trigger11CompletionInterruptEnable

Configures ADC to generate interrupt when trigger 11 completion. 




enumerator kLPADC_Trigger12CompletionInterruptEnable

Configures ADC to generate interrupt when trigger 12 completion. 




enumerator kLPADC_Trigger13CompletionInterruptEnable

Configures ADC to generate interrupt when trigger 13 completion. 




enumerator kLPADC_Trigger14CompletionInterruptEnable

Configures ADC to generate interrupt when trigger 14 completion. 




enumerator kLPADC_Trigger15CompletionInterruptEnable

Configures ADC to generate interrupt when trigger 15 completion. 






enum _lpadc_trigger_status_flags

The enumerator of lpadc trigger status flags, including interrupted flags and completed flags. 
Note: LPADC of different chips supports different number of trigger sources, please check the Reference Manual for details. 
Values:


enumerator kLPADC_Trigger0InterruptedFlag

Trigger 0 is interrupted by a high priority exception. 




enumerator kLPADC_Trigger1InterruptedFlag

Trigger 1 is interrupted by a high priority exception. 




enumerator kLPADC_Trigger2InterruptedFlag

Trigger 2 is interrupted by a high priority exception. 




enumerator kLPADC_Trigger3InterruptedFlag

Trigger 3 is interrupted by a high priority exception. 




enumerator kLPADC_Trigger4InterruptedFlag

Trigger 4 is interrupted by a high priority exception. 




enumerator kLPADC_Trigger5InterruptedFlag

Trigger 5 is interrupted by a high priority exception. 




enumerator kLPADC_Trigger6InterruptedFlag

Trigger 6 is interrupted by a high priority exception. 




enumerator kLPADC_Trigger7InterruptedFlag

Trigger 7 is interrupted by a high priority exception. 




enumerator kLPADC_Trigger8InterruptedFlag

Trigger 8 is interrupted by a high priority exception. 




enumerator kLPADC_Trigger9InterruptedFlag

Trigger 9 is interrupted by a high priority exception. 




enumerator kLPADC_Trigger10InterruptedFlag

Trigger 10 is interrupted by a high priority exception. 




enumerator kLPADC_Trigger11InterruptedFlag

Trigger 11 is interrupted by a high priority exception. 




enumerator kLPADC_Trigger12InterruptedFlag

Trigger 12 is interrupted by a high priority exception. 




enumerator kLPADC_Trigger13InterruptedFlag

Trigger 13 is interrupted by a high priority exception. 




enumerator kLPADC_Trigger14InterruptedFlag

Trigger 14 is interrupted by a high priority exception. 




enumerator kLPADC_Trigger15InterruptedFlag

Trigger 15 is interrupted by a high priority exception. 




enumerator kLPADC_Trigger0CompletedFlag

Trigger 0 is completed and trigger 0 has enabled completion interrupts. 




enumerator kLPADC_Trigger1CompletedFlag

Trigger 1 is completed and trigger 1 has enabled completion interrupts. 




enumerator kLPADC_Trigger2CompletedFlag

Trigger 2 is completed and trigger 2 has enabled completion interrupts. 




enumerator kLPADC_Trigger3CompletedFlag

Trigger 3 is completed and trigger 3 has enabled completion interrupts. 




enumerator kLPADC_Trigger4CompletedFlag

Trigger 4 is completed and trigger 4 has enabled completion interrupts. 




enumerator kLPADC_Trigger5CompletedFlag

Trigger 5 is completed and trigger 5 has enabled completion interrupts. 




enumerator kLPADC_Trigger6CompletedFlag

Trigger 6 is completed and trigger 6 has enabled completion interrupts. 




enumerator kLPADC_Trigger7CompletedFlag

Trigger 7 is completed and trigger 7 has enabled completion interrupts. 




enumerator kLPADC_Trigger8CompletedFlag

Trigger 8 is completed and trigger 8 has enabled completion interrupts. 




enumerator kLPADC_Trigger9CompletedFlag

Trigger 9 is completed and trigger 9 has enabled completion interrupts. 




enumerator kLPADC_Trigger10CompletedFlag

Trigger 10 is completed and trigger 10 has enabled completion interrupts. 




enumerator kLPADC_Trigger11CompletedFlag

Trigger 11 is completed and trigger 11 has enabled completion interrupts. 




enumerator kLPADC_Trigger12CompletedFlag

Trigger 12 is completed and trigger 12 has enabled completion interrupts. 




enumerator kLPADC_Trigger13CompletedFlag

Trigger 13 is completed and trigger 13 has enabled completion interrupts. 




enumerator kLPADC_Trigger14CompletedFlag

Trigger 14 is completed and trigger 14 has enabled completion interrupts. 




enumerator kLPADC_Trigger15CompletedFlag

Trigger 15 is completed and trigger 15 has enabled completion interrupts. 






enum _lpadc_sample_scale_mode

Define enumeration of sample scale mode. 
The sample scale mode is used to reduce the selected ADC analog channel input voltage level by a factor. The maximum possible voltage on the ADC channel input should be considered when selecting a scale mode to ensure that the reducing factor always results voltage level at or below the VREFH reference. This reducing capability allows conversion of analog inputs higher than VREFH. A-side and B-side channel inputs are both scaled using the scale mode. 
Values:


enumerator kLPADC_SamplePartScale

Use divided input voltage signal. (For scale select,please refer to the reference manual). 




enumerator kLPADC_SampleFullScale

Full scale (Factor of 1). 






enum _lpadc_sample_channel_mode

Define enumeration of channel sample mode. 
The channel sample mode configures the channel with single-end/differential/dual-single-end, side A/B. 
Values:


enumerator kLPADC_SampleChannelSingleEndSideA

Single-end mode, only A-side channel is converted. 




enumerator kLPADC_SampleChannelSingleEndSideB

Single-end mode, only B-side channel is converted. 




enumerator kLPADC_SampleChannelDiffBothSideAB

Differential mode, the ADC result is (CHnA-CHnB). 




enumerator kLPADC_SampleChannelDiffBothSideBA

Differential mode, the ADC result is (CHnB-CHnA). 




enumerator kLPADC_SampleChannelDiffBothSide

Differential mode, the ADC result is (CHnA-CHnB). 




enumerator kLPADC_SampleChannelDualSingleEndBothSide

Dual-Single-Ended Mode. Both A side and B side channels are converted independently. 






enum _lpadc_hardware_average_mode

Define enumeration of hardware average selection. 
It Selects how many ADC conversions are averaged to create the ADC result. An internal storage buffer is used to capture temporary results while the averaging iterations are executed.

Note
Some enumerator values are not available on some devices, mainly depends on the size of AVGS field in CMDH register. 

Values:


enumerator kLPADC_HardwareAverageCount1

Single conversion. 




enumerator kLPADC_HardwareAverageCount2

2 conversions averaged. 




enumerator kLPADC_HardwareAverageCount4

4 conversions averaged. 




enumerator kLPADC_HardwareAverageCount8

8 conversions averaged. 




enumerator kLPADC_HardwareAverageCount16

16 conversions averaged. 




enumerator kLPADC_HardwareAverageCount32

32 conversions averaged. 




enumerator kLPADC_HardwareAverageCount64

64 conversions averaged. 




enumerator kLPADC_HardwareAverageCount128

128 conversions averaged. 






enum _lpadc_sample_time_mode

Define enumeration of sample time selection. 
The shortest sample time maximizes conversion speed for lower impedance inputs. Extending sample time allows higher impedance inputs to be accurately sampled. Longer sample times can also be used to lower overall power consumption when command looping and sequencing is configured and high conversion rates are not required. 
Values:


enumerator kLPADC_SampleTimeADCK3

3 ADCK cycles total sample time. 




enumerator kLPADC_SampleTimeADCK5

5 ADCK cycles total sample time. 




enumerator kLPADC_SampleTimeADCK7

7 ADCK cycles total sample time. 




enumerator kLPADC_SampleTimeADCK11

11 ADCK cycles total sample time. 




enumerator kLPADC_SampleTimeADCK19

19 ADCK cycles total sample time. 




enumerator kLPADC_SampleTimeADCK35

35 ADCK cycles total sample time. 




enumerator kLPADC_SampleTimeADCK67

69 ADCK cycles total sample time. 




enumerator kLPADC_SampleTimeADCK131

131 ADCK cycles total sample time. 






enum _lpadc_hardware_compare_mode

Define enumeration of hardware compare mode. 
After an ADC channel input is sampled and converted and any averaging iterations are performed, this mode setting guides operation of the automatic compare function to optionally only store when the compare operation is true. When compare is enabled, the conversion result is compared to the compare values. 
Values:


enumerator kLPADC_HardwareCompareDisabled

Compare disabled. 




enumerator kLPADC_HardwareCompareStoreOnTrue

Compare enabled. Store on true. 




enumerator kLPADC_HardwareCompareRepeatUntilTrue

Compare enabled. Repeat channel acquisition until true. 






enum _lpadc_conversion_resolution_mode

Define enumeration of conversion resolution mode. 
Configure the resolution bit in specific conversion type. For detailed resolution accuracy, see to lpadc_sample_channel_mode_t
Values:


enumerator kLPADC_ConversionResolutionStandard

Standard resolution. Single-ended 12-bit conversion, Differential 13-bit conversion with 2’s complement output. 




enumerator kLPADC_ConversionResolutionHigh

High resolution. Single-ended 16-bit conversion; Differential 16-bit conversion with 2’s complement output. 






enum _lpadc_conversion_average_mode

Define enumeration of conversion averages mode. 
Configure the converion average number for auto-calibration. 

Note
Some enumerator values are not available on some devices, mainly depends on the size of CAL_AVGS field in CTRL register. 

Values:


enumerator kLPADC_ConversionAverage1

Single conversion. 




enumerator kLPADC_ConversionAverage2

2 conversions averaged. 




enumerator kLPADC_ConversionAverage4

4 conversions averaged. 




enumerator kLPADC_ConversionAverage8

8 conversions averaged. 




enumerator kLPADC_ConversionAverage16

16 conversions averaged. 




enumerator kLPADC_ConversionAverage32

32 conversions averaged. 




enumerator kLPADC_ConversionAverage64

64 conversions averaged. 




enumerator kLPADC_ConversionAverage128

128 conversions averaged. 




enumerator kLPADC_ConversionAverageMax







enum _lpadc_reference_voltage_mode

Define enumeration of reference voltage source. 
For detail information, need to check the SoC’s specification. 
Values:


enumerator kLPADC_ReferenceVoltageAlt1

Option 1 setting. 




enumerator kLPADC_ReferenceVoltageAlt2

Option 2 setting. 




enumerator kLPADC_ReferenceVoltageAlt3

Option 3 setting. 






enum _lpadc_power_level_mode

Define enumeration of power configuration. 
Configures the ADC for power and performance. In the highest power setting the highest conversion rates will be possible. Refer to the device data sheet for power and performance capabilities for each setting. 
Values:


enumerator kLPADC_PowerLevelAlt1

Lowest power setting. 




enumerator kLPADC_PowerLevelAlt2

Next lowest power setting. 




enumerator kLPADC_PowerLevelAlt3

… 




enumerator kLPADC_PowerLevelAlt4

Highest power setting. 






enum _lpadc_offset_calibration_mode

Define enumeration of offset calibration mode. 
Values:


enumerator kLPADC_OffsetCalibration12bitMode

12 bit offset calibration mode. 




enumerator kLPADC_OffsetCalibration16bitMode

16 bit offset calibration mode. 






enum _lpadc_trigger_priority_policy

Define enumeration of trigger priority policy. 
This selection controls how higher priority triggers are handled. 

Note
kLPADC_TriggerPriorityPreemptSubsequently is not available on some devices, mainly depends on the size of TPRICTRL field in CFG register. 

Values:


enumerator kLPADC_ConvPreemptImmediatelyNotAutoResumed

If a higher priority trigger is detected during command processing, the current conversion is aborted and the new command specified by the trigger is started, when higher priority conversion finishes, the preempted conversion is not automatically resumed or restarted. 




enumerator kLPADC_ConvPreemptSoftlyNotAutoResumed

If a higher priority trigger is received during command processing, the current conversion is completed (including averaging iterations and compare function if enabled) and stored to the result FIFO before the higher priority trigger/command is initiated, when higher priority conversion finishes, the preempted conversion is not resumed or restarted. 




enumerator kLPADC_ConvPreemptImmediatelyAutoRestarted

If a higher priority trigger is detected during command processing, the current conversion is aborted and the new command specified by the trigger is started, when higher priority conversion finishes, the preempted conversion will automatically be restarted. 




enumerator kLPADC_ConvPreemptSoftlyAutoRestarted

If a higher priority trigger is received during command processing, the current conversion is completed (including averaging iterations and compare function if enabled) and stored to the result FIFO before the higher priority trigger/command is initiated, when higher priority conversion finishes, the preempted conversion will automatically be restarted. 




enumerator kLPADC_ConvPreemptImmediatelyAutoResumed

If a higher priority trigger is detected during command processing, the current conversion is aborted and the new command specified by the trigger is started, when higher priority conversion finishes, the preempted conversion will automatically be resumed. 




enumerator kLPADC_ConvPreemptSoftlyAutoResumed

If a higher priority trigger is received during command processing, the current conversion is completed (including averaging iterations and compare function if enabled) and stored to the result FIFO before the higher priority trigger/command is initiated, when higher priority conversion finishes, the preempted conversion will be automatically be resumed. 




enumerator kLPADC_TriggerPriorityPreemptImmediately

Legacy support is not recommended as it only ensures compatibility with older versions. 




enumerator kLPADC_TriggerPriorityPreemptSoftly

Legacy support is not recommended as it only ensures compatibility with older versions. 




enumerator kLPADC_TriggerPriorityExceptionDisabled

High priority trigger exception disabled. 






enum _lpadc_tune_value

Define enumeration of tune value. 
Values:


enumerator kLPADC_TuneValue0

Tune value 0. 




enumerator kLPADC_TuneValue1

Tune value 1. 




enumerator kLPADC_TuneValue2

Tune value 2. 




enumerator kLPADC_TuneValue3

Tune value 3. 






typedef enum _lpadc_sample_scale_mode lpadc_sample_scale_mode_t

Define enumeration of sample scale mode. 
The sample scale mode is used to reduce the selected ADC analog channel input voltage level by a factor. The maximum possible voltage on the ADC channel input should be considered when selecting a scale mode to ensure that the reducing factor always results voltage level at or below the VREFH reference. This reducing capability allows conversion of analog inputs higher than VREFH. A-side and B-side channel inputs are both scaled using the scale mode. 




typedef enum _lpadc_sample_channel_mode lpadc_sample_channel_mode_t

Define enumeration of channel sample mode. 
The channel sample mode configures the channel with single-end/differential/dual-single-end, side A/B. 




typedef enum _lpadc_hardware_average_mode lpadc_hardware_average_mode_t

Define enumeration of hardware average selection. 
It Selects how many ADC conversions are averaged to create the ADC result. An internal storage buffer is used to capture temporary results while the averaging iterations are executed.

Note
Some enumerator values are not available on some devices, mainly depends on the size of AVGS field in CMDH register. 





typedef enum _lpadc_sample_time_mode lpadc_sample_time_mode_t

Define enumeration of sample time selection. 
The shortest sample time maximizes conversion speed for lower impedance inputs. Extending sample time allows higher impedance inputs to be accurately sampled. Longer sample times can also be used to lower overall power consumption when command looping and sequencing is configured and high conversion rates are not required. 




typedef enum _lpadc_hardware_compare_mode lpadc_hardware_compare_mode_t

Define enumeration of hardware compare mode. 
After an ADC channel input is sampled and converted and any averaging iterations are performed, this mode setting guides operation of the automatic compare function to optionally only store when the compare operation is true. When compare is enabled, the conversion result is compared to the compare values. 




typedef enum _lpadc_conversion_resolution_mode lpadc_conversion_resolution_mode_t

Define enumeration of conversion resolution mode. 
Configure the resolution bit in specific conversion type. For detailed resolution accuracy, see to lpadc_sample_channel_mode_t




typedef enum _lpadc_conversion_average_mode lpadc_conversion_average_mode_t

Define enumeration of conversion averages mode. 
Configure the converion average number for auto-calibration. 

Note
Some enumerator values are not available on some devices, mainly depends on the size of CAL_AVGS field in CTRL register. 





typedef enum _lpadc_reference_voltage_mode lpadc_reference_voltage_source_t

Define enumeration of reference voltage source. 
For detail information, need to check the SoC’s specification. 




typedef enum _lpadc_power_level_mode lpadc_power_level_mode_t

Define enumeration of power configuration. 
Configures the ADC for power and performance. In the highest power setting the highest conversion rates will be possible. Refer to the device data sheet for power and performance capabilities for each setting. 




typedef enum _lpadc_offset_calibration_mode lpadc_offset_calibration_mode_t

Define enumeration of offset calibration mode. 




typedef enum _lpadc_trigger_priority_policy lpadc_trigger_priority_policy_t

Define enumeration of trigger priority policy. 
This selection controls how higher priority triggers are handled. 

Note
kLPADC_TriggerPriorityPreemptSubsequently is not available on some devices, mainly depends on the size of TPRICTRL field in CFG register. 





typedef enum _lpadc_tune_value lpadc_tune_value_t

Define enumeration of tune value. 




typedef struct _lpadc_calibration_value lpadc_calibration_value_t

A structure of calibration value. 




LPADC_CONVERSION_COMPLETE_TIMEOUT

Max loops to wait for LPADC conversion complete. 
When doing calibration, driver will wait for the completion of conversion. This parameter defines how many loops to check completion before return timeout. If defined as 0, driver will wait forever until completion. 




LPADC_CALIBRATION_READY_TIMEOUT

Max loops to wait for LPADC calibration ready. 
Before doing calibration, driver will wait for the calibration ready. This parameter defines how many loops to check the calibration ready. If defined as 0, driver will wait forever until ready. 




LPADC_GAIN_CAL_READY_TIMEOUT

Max loops to wait for LPADC gain calibration GAIN_CAL ready. 
Before doing calibration, driver will wait for the gain calibration GAIN_CAL ready. This parameter defines how many loops to check the gain calibration GAIN_CAL ready. If defined as 0, driver will wait forever until ready. 




ADC_OFSTRIM_OFSTRIM_MAX





ADC_OFSTRIM_OFSTRIM_SIGN





LPADC_GET_ACTIVE_COMMAND_STATUS(statusVal)

Define the MACRO function to get command status from status value. 
The statusVal is the return value from LPADC_GetStatusFlags(). 




LPADC_GET_ACTIVE_TRIGGER_STATUE(statusVal)

Define the MACRO function to get trigger status from status value. 
The statusVal is the return value from LPADC_GetStatusFlags(). 




void LPADC_Init(ADC_Type *base, const lpadc_config_t *config)

Initializes the LPADC module. 

Parameters:

base – LPADC peripheral base address. 
config – Pointer to configuration structure. See “lpadc_config_t”. 







void LPADC_GetDefaultConfig(lpadc_config_t *config)

Gets an available pre-defined settings for initial configuration. 
This function initializes the converter configuration structure with an available settings. The default values are: 
config->enableInDozeMode        = true;
config->enableAnalogPreliminary = false;
config->powerUpDelay            = 0x80;
config->referenceVoltageSource  = kLPADC_ReferenceVoltageAlt1;
config->powerLevelMode          = kLPADC_PowerLevelAlt1;
config->triggerPriorityPolicy   = kLPADC_TriggerPriorityPreemptImmediately;
config->enableConvPause         = false;
config->convPauseDelay          = 0U;
config->FIFOWatermark           = 0U;


 

Parameters:

config – Pointer to configuration structure. 







void LPADC_Deinit(ADC_Type *base)

De-initializes the LPADC module. 

Parameters:

base – LPADC peripheral base address. 







static inline void LPADC_Enable(ADC_Type *base, bool enable)

Switch on/off the LPADC module. 

Parameters:

base – LPADC peripheral base address. 
enable – switcher to the module. 







static inline void LPADC_DoResetFIFO(ADC_Type *base)

Do reset the conversion FIFO. 

Parameters:

base – LPADC peripheral base address. 







static inline void LPADC_DoResetConfig(ADC_Type *base)

Do reset the module’s configuration. 
Reset all ADC internal logic and registers, except the Control Register (ADCx_CTRL).

Parameters:

base – LPADC peripheral base address. 







static inline uint32_t LPADC_GetStatusFlags(ADC_Type *base)

Get status flags. 

Parameters:

base – LPADC peripheral base address. 


Returns:
status flags’ mask. See to _lpadc_status_flags. 






static inline void LPADC_ClearStatusFlags(ADC_Type *base, uint32_t mask)

Clear status flags. 
Only the flags can be cleared by writing ADCx_STATUS register would be cleared by this API.

Parameters:

base – LPADC peripheral base address. 
mask – Mask value for flags to be cleared. See to _lpadc_status_flags. 







static inline uint32_t LPADC_GetTriggerStatusFlags(ADC_Type *base)

Get trigger status flags to indicate which trigger sequences have been completed or interrupted by a high priority trigger exception. 

Parameters:

base – LPADC peripheral base address. 


Returns:
The OR’ed value of _lpadc_trigger_status_flags. 






static inline void LPADC_ClearTriggerStatusFlags(ADC_Type *base, uint32_t mask)

Clear trigger status flags. 

Parameters:

base – LPADC peripheral base address. 
mask – The mask of trigger status flags to be cleared, should be the OR’ed value of _lpadc_trigger_status_flags. 







static inline void LPADC_EnableInterrupts(ADC_Type *base, uint32_t mask)

Enable interrupts. 

Parameters:

base – LPADC peripheral base address. 
mask – Mask value for interrupt events. See to _lpadc_interrupt_enable. 







static inline void LPADC_DisableInterrupts(ADC_Type *base, uint32_t mask)

Disable interrupts. 

Parameters:

base – LPADC peripheral base address. 
mask – Mask value for interrupt events. See to _lpadc_interrupt_enable. 







static inline void LPADC_EnableFIFOWatermarkDMA(ADC_Type *base, bool enable)

Switch on/off the DMA trigger for FIFO watermark event. 

Parameters:

base – LPADC peripheral base address. 
enable – Switcher to the event. 







static inline uint32_t LPADC_GetConvResultCount(ADC_Type *base)

Get the count of result kept in conversion FIFO. 

Parameters:

base – LPADC peripheral base address. 


Returns:
The count of result kept in conversion FIFO. 






bool LPADC_GetConvResult(ADC_Type *base, lpadc_conv_result_t *result)

Get the result in conversion FIFO. 

Parameters:

base – LPADC peripheral base address. 
result – Pointer to structure variable that keeps the conversion result in conversion FIFO.


Returns:
Status whether FIFO entry is valid. 






void LPADC_GetConvResultBlocking(ADC_Type *base, lpadc_conv_result_t *result)

Get the result in conversion FIFO using blocking method. 

Parameters:

base – LPADC peripheral base address. 
result – Pointer to structure variable that keeps the conversion result in conversion FIFO. 







void LPADC_SetConvTriggerConfig(ADC_Type *base, uint32_t triggerId, const lpadc_conv_trigger_config_t *config)

Configure the conversion trigger source. 
Each programmable trigger can launch the conversion command in command buffer.

Parameters:

base – LPADC peripheral base address. 
triggerId – ID for each trigger. Typically, the available value range is from 0. 
config – Pointer to configuration structure. See to lpadc_conv_trigger_config_t. 







void LPADC_GetDefaultConvTriggerConfig(lpadc_conv_trigger_config_t *config)

Gets an available pre-defined settings for trigger’s configuration. 
This function initializes the trigger’s configuration structure with an available settings. The default values are: 
config->targetCommandId        = 0U;
config->delayPower             = 0U;
config->priority               = 0U;
config->channelAFIFOSelect     = 0U;
config->channelBFIFOSelect     = 0U;
config->enableHardwareTrigger  = false;


 

Parameters:

config – Pointer to configuration structure. 







static inline void LPADC_DoSoftwareTrigger(ADC_Type *base, uint32_t triggerIdMask)

Do software trigger to conversion command. 

Parameters:

base – LPADC peripheral base address. 
triggerIdMask – Mask value for software trigger indexes, which count from zero. 







static inline void LPADC_EnableHardwareTriggerCommandSelection(ADC_Type *base, uint32_t triggerId, bool enable)

Enable hardware trigger command selection. 
This function will use the hardware trigger command from ADC_ETC.The trigger command is then defined by ADC hardware trigger command selection field in ADC_ETC- >TRIGx_CHAINy_z_n[CSEL].

Parameters:

base – LPADC peripheral base address. 
triggerId – ID for each trigger. Typically, the available value range is from 0. 
enable – True to enable or flase to disable. 







void LPADC_SetConvCommandConfig(ADC_Type *base, uint32_t commandId, const lpadc_conv_command_config_t *config)

Configure conversion command. 

Note
The number of compare value register on different chips is different, that is mean in some chips, some command buffers do not have the compare functionality.


Parameters:

base – LPADC peripheral base address. 
commandId – ID for command in command buffer. Typically, the available value range is 1 - 15. 
config – Pointer to configuration structure. See to lpadc_conv_command_config_t. 







void LPADC_GetDefaultConvCommandConfig(lpadc_conv_command_config_t *config)

Gets an available pre-defined settings for conversion command’s configuration. 
This function initializes the conversion command’s configuration structure with an available settings. The default values are: 
config->sampleScaleMode            = kLPADC_SampleFullScale;
config->channelBScaleMode          = kLPADC_SampleFullScale;
config->sampleChannelMode          = kLPADC_SampleChannelSingleEndSideA;
config->channelNumber              = 0U;
config->channelBNumber             = 0U;
config->chainedNextCommandNumber   = 0U;
config->enableAutoChannelIncrement = false;
config->loopCount                  = 0U;
config->hardwareAverageMode        = kLPADC_HardwareAverageCount1;
config->sampleTimeMode             = kLPADC_SampleTimeADCK3;
config->hardwareCompareMode        = kLPADC_HardwareCompareDisabled;
config->hardwareCompareValueHigh   = 0U;
config->hardwareCompareValueLow    = 0U;
config->conversionResolutionMode   = kLPADC_ConversionResolutionStandard;
config->enableWaitTrigger          = false;
config->enableChannelB             = false;


 

Parameters:

config – Pointer to configuration structure. 







void LPADC_EnableCalibration(ADC_Type *base, bool enable)

Enable the calibration function. 
When CALOFS is set, the ADC is configured to perform a calibration function anytime the ADC executes a conversion. Any channel selected is ignored and the value returned in the RESFIFO is a signed value between -31 and 31. -32 is not a valid and is never a returned value. Software should copy the lower 6- bits of the conversion result stored in the RESFIFO after a completed calibration conversion to the OFSTRIM field. The OFSTRIM field is used in normal operation for offset correction.

Parameters:

base – LPADC peripheral base address. 
enable – switcher to the calibration function. 







static inline void LPADC_SetOffsetValue(ADC_Type *base, uint32_t value)

Set proper offset value to trim ADC. 
To minimize the offset during normal operation, software should read the conversion result from the RESFIFO calibration operation and write the lower 6 bits to the OFSTRIM register.

Parameters:

base – LPADC peripheral base address. 
value – Setting offset value. 







status_t LPADC_DoAutoCalibration(ADC_Type *base)

Do auto calibration. 
Calibration function should be executed before using converter in application. It used the software trigger and a dummy conversion, get the offset and write them into the OFSTRIM register. It called some of functional API including:

LPADC_EnableCalibration(…)
LPADC_SetOffsetValue(…)
LPADC_SetConvCommandConfig(…)
LPADC_SetConvTriggerConfig(…)



Parameters:

base – LPADC peripheral base address.
base – LPADC peripheral base address. 


Return values:

kStatus_Success – Successfully configured. 
kStatus_Timeout – Timeout occurs while waiting completion.







static inline void LPADC_SetOffsetValue(ADC_Type *base, int16_t value)

Set trim value for offset. 

Note
For 16-bit conversions, each increment is 1/2 LSB resulting in a programmable offset range of -256 LSB to 255.5 LSB; For 12-bit conversions, each increment is 1/32 LSB resulting in a programmable offset range of -16 LSB to 15.96875 LSB.


Parameters:

base – LPADC peripheral base address. 
value – Offset trim value, is a 10-bit signed value between -512 and 511. 







static inline void LPADC_GetOffsetValue(ADC_Type *base, int16_t *pValue)

Get trim value of offset. 

Parameters:

base – LPADC peripheral base address. 
pValue – Pointer to the variable in type of int16_t to store offset value. 







static inline void LPADC_EnableOffsetCalibration(ADC_Type *base, bool enable)

Enable the offset calibration function. 

Parameters:

base – LPADC peripheral base address. 
enable – switcher to the calibration function. 







static inline void LPADC_SetOffsetCalibrationMode(ADC_Type *base, lpadc_offset_calibration_mode_t mode)

Set offset calibration mode. 

Parameters:

base – LPADC peripheral base address. 
mode – set offset calibration mode.see to lpadc_offset_calibration_mode_t . 







status_t LPADC_DoOffsetCalibration(ADC_Type *base)

Do offset calibration. 

Parameters:

base – LPADC peripheral base address.


Return values:

kStatus_Success – Successfully configured. 
kStatus_Timeout – Timeout occurs while waiting completion. 







void LPADC_PrepareAutoCalibration(ADC_Type *base)

Prepare auto calibration, LPADC_FinishAutoCalibration has to be called before using the LPADC. LPADC_DoAutoCalibration has been split in two API to avoid to be stuck too long in the function. 

Parameters:

base – LPADC peripheral base address. 







status_t LPADC_FinishAutoCalibration(ADC_Type *base)

Finish auto calibration start with LPADC_PrepareAutoCalibration. 

Note
This feature is used for LPADC with CTRL[CALOFSMODE].


Parameters:

base – LPADC peripheral base address.


Return values:

kStatus_Success – Successfully configured. 
kStatus_Timeout – Timeout occurs while waiting completion. 







void LPADC_GetCalibrationValue(ADC_Type *base, lpadc_calibration_value_t *ptrCalibrationValue)

Get calibration value into the memory which is defined by invoker. 

Note
Please note the ADC will be disabled temporary. 


Note
This function should be used after finish calibration.


Parameters:

base – LPADC peripheral base address. 
ptrCalibrationValue – Pointer to lpadc_calibration_value_t structure, this memory block should be always powered on even in low power modes. 







status_t LPADC_SetCalibrationValue(ADC_Type *base, const lpadc_calibration_value_t *ptrCalibrationValue)

Set calibration value into ADC calibration registers. 

Note
Please note the ADC will be disabled temporary.


Parameters:

base – LPADC peripheral base address. 
ptrCalibrationValue – Pointer to lpadc_calibration_value_t structure which contains ADC’s calibration value.


Return values:

kStatus_Success – Successfully configured. 
kStatus_Timeout – Timeout occurs while waiting completion. 







static inline void LPADC_RequestHighSpeedModeTrim(ADC_Type *base)

Request high speed mode trim calculation. 

Parameters:

base – LPADC peripheral base address. 







static inline int8_t LPADC_GetHighSpeedTrimValue(ADC_Type *base)

Get high speed mode trim value, the result is a 5-bit signed value between -16 and 15. 

Note
The high speed mode trim value is used to minimize offset for high speed conversion.


Parameters:

base – LPADC peripheral base address. 


Returns:
The calculated high speed mode trim value. 






static inline void LPADC_SetHighSpeedTrimValue(ADC_Type *base, int8_t trimValue)

Set high speed mode trim value. 

Note
If is possible to set the trim value manually, but it is recommended to use the LPADC_RequestHighSpeedModeTrim.


Parameters:

base – LPADC peripheral base address. 
trimValue – The trim value to be set. 







static inline void LPADC_EnableHighSpeedConversionMode(ADC_Type *base, bool enable)

Enable/disable high speed conversion mode, if enabled conversions complete 2 or 3 ADCK cycles sooner compared to conversion cycle counts when high speed mode is disabled. 

Parameters:

base – LPADC peripheral base address. 
enable – Used to enable/disable high speed conversion mode:

true Enable high speed conversion mode;
false Disable high speed conversion mode. 









static inline void LPADC_EnableExtraCycle(ADC_Type *base, bool enable)

Enable/disable an additional ADCK cycle to conversion. 

Parameters:

base – LPADC peripheral base address. 
enable – Used to enable/disable an additional ADCK cycle to conversion:

true Enable an additional ADCK cycle to conversion;
false Disable an additional ADCK cycle to conversion. 









static inline void LPADC_SetTuneValue(ADC_Type *base, lpadc_tune_value_t tuneValue)

Set tune value which provides some variability in how many cycles are needed to complete a conversion. 

Parameters:

base – LPADC peripheral base address. 
tuneValue – The tune value to be set, please refer to lpadc_tune_value_t. 







static inline lpadc_tune_value_t LPADC_GetTuneValue(ADC_Type *base)

Get tune value which provides some variability in how many cycles are needed to complete a conversion. 

Parameters:

base – LPADC peripheral base address. 


Returns:
The tune value, please refer to lpadc_tune_value_t. 






static inline void LPADC_EnableJustifiedLeft(ADC_Type *base, bool enable)

Enable/disable left-justify format in 12-bit single-end mode. 

Parameters:

base – LPADC peripheral base address. 
enable – Used to enable/disable left-justify format in 12-bit single-end mode:

true Enable left-justify format in 12-bit single-end mode;
false Disable left-justify format in 12-bit single-end mode. 









FSL_LPADC_DRIVER_VERSION

LPADC driver version 2.9.5. 




struct lpadc_config_t


#include <fsl_lpadc.h>
LPADC global configuration. 
This structure would used to keep the settings for initialization. 

Public Members


bool enableInternalClock

Enables the internally generated clock source. The clock source is used in clock selection logic at the chip level and is optionally used for the ADC clock source. 




bool enableVref1LowVoltage

If voltage reference option1 input is below 1.8V, it should be “true”. If voltage reference option1 input is above 1.8V, it should be “false”. 




bool enableInDozeMode

Control system transition to Stop and Wait power modes while ADC is converting. When enabled in Doze mode, immediate entries to Wait or Stop are allowed. When disabled, the ADC will wait for the current averaging iteration/FIFO storage to complete before acknowledging stop or wait mode entry. 




lpadc_conversion_average_mode_t conversionAverageMode

Auto-Calibration Averages. 




bool enableAnalogPreliminary

ADC analog circuits are pre-enabled and ready to execute conversions without startup delays(at the cost of higher DC current consumption). 




uint32_t powerUpDelay

When the analog circuits are not pre-enabled, the ADC analog circuits are only powered while the ADC is active and there is a counted delay defined by this field after an initial trigger transitions the ADC from its Idle state to allow time for the analog circuits to stabilize. The startup delay count of (powerUpDelay * 4) ADCK cycles must result in a longer delay than the analog startup time. 




lpadc_reference_voltage_source_t referenceVoltageSource

Selects the voltage reference high used for conversions. 




lpadc_power_level_mode_t powerLevelMode

Power Configuration Selection. 




lpadc_trigger_priority_policy_t triggerPriorityPolicy

Control how higher priority triggers are handled, see to lpadc_trigger_priority_policy_t. 




bool enableConvPause

Enables the ADC pausing function. When enabled, a programmable delay is inserted during command execution sequencing between LOOP iterations, between commands in a sequence, and between conversions when command is executing in “Compare Until True” configuration. 




uint32_t convPauseDelay

Controls the duration of pausing during command execution sequencing. The pause delay is a count of (convPauseDelay*4) ADCK cycles. Only available when ADC pausing function is enabled. The available value range is in 9-bit. 




uint32_t FIFOWatermark

FIFOWatermark is a programmable threshold setting. When the number of datawords stored in the ADC Result FIFO is greater than the value in this field, the ready flag would be asserted to indicate stored data has reached the programmable threshold. 







struct lpadc_conv_command_config_t


#include <fsl_lpadc.h>
Define structure to keep the configuration for conversion command. 

Public Members


lpadc_sample_scale_mode_t sampleScaleMode

Sample scale mode. 




lpadc_sample_scale_mode_t channelBScaleMode

Alternate channe B Scale mode. 




lpadc_sample_channel_mode_t sampleChannelMode

Channel sample mode. 




uint32_t channelNumber

Channel number, select the channel or channel pair. 




uint32_t channelBNumber

Alternate Channel B number, select the channel. 




uint32_t chainedNextCommandNumber

Selects the next command to be executed after this command completes. 1-15 is available, 0 is to terminate the chain after this command. 




bool enableAutoChannelIncrement

Loop with increment: when disabled, the “loopCount” field selects the number of times the selected channel is converted consecutively; when enabled, the “loopCount” field defines how many consecutive channels are converted as part of the command execution. 




uint32_t loopCount

Selects how many times this command executes before finish and transition to the next command or Idle state. Command executes LOOP+1 times. 0-15 is available. 




lpadc_hardware_average_mode_t hardwareAverageMode

Hardware average selection. 




lpadc_sample_time_mode_t sampleTimeMode

Sample time selection. 




lpadc_hardware_compare_mode_t hardwareCompareMode

Hardware compare selection. 




uint32_t hardwareCompareValueHigh

Compare Value High. The available value range is in 16-bit. 




uint32_t hardwareCompareValueLow

Compare Value Low. The available value range is in 16-bit. 




lpadc_conversion_resolution_mode_t conversionResolutionMode

Conversion resolution mode. 




bool enableWaitTrigger

Wait for trigger assertion before execution: when disabled, this command will be automatically executed; when enabled, the active trigger must be asserted again before executing this command. 







struct lpadc_conv_trigger_config_t


#include <fsl_lpadc.h>
Define structure to keep the configuration for conversion trigger. 

Public Members


uint32_t targetCommandId

Select the command from command buffer to execute upon detect of the associated trigger event. 




uint32_t delayPower

Select the trigger delay duration to wait at the start of servicing a trigger event. When this field is clear, then no delay is incurred. When this field is set to a non-zero value, the duration for the delay is 2^delayPower ADCK cycles. The available value range is 4-bit. 




uint32_t priority

Sets the priority of the associated trigger source. If two or more triggers have the same priority level setting, the lower order trigger event has the higher priority. The lower value for this field is for the higher priority, the available value range is 1-bit. 




bool enableHardwareTrigger

Enable hardware trigger source to initiate conversion on the rising edge of the input trigger source or not. THe software trigger is always available. 







struct lpadc_conv_result_t


#include <fsl_lpadc.h>
Define the structure to keep the conversion result. 

Public Members


uint32_t commandIdSource

Indicate the command buffer being executed that generated this result. 




uint32_t loopCountIndex

Indicate the loop count value during command execution that generated this result. 




uint32_t triggerIdSource

Indicate the trigger source that initiated a conversion and generated this result. 




uint16_t convValue

Data result. 







struct _lpadc_calibration_value


#include <fsl_lpadc.h>
A structure of calibration value. 




Lpc_freqme#


void FREQME_Init(FREQME_Type *base, const freq_measure_config_t *config)

Initialize freqme module, set operate mode, operate mode attribute and initialize measurement cycle. 

Parameters:

base – FREQME peripheral base address. 
config – The pointer to module basic configuration, please refer to freq_measure_config_t. 







void FREQME_GetDefaultConfig(freq_measure_config_t *config)

Get default configuration. 
config->operateMode = kFREQME_FreqMeasurementMode;
config->operateModeAttribute.refClkScaleFactor = 0U;
config->enableContinuousMode                   = false;
config->startMeasurement                       = false;



Parameters:

config – The pointer to module basic configuration, please refer to freq_measure_config_t. 







static inline void FREQME_StartMeasurementCycle(FREQME_Type *base)

Start frequency or pulse width measurement process. 

Parameters:

base – FREQME peripheral base address. 







static inline void FREQME_TerminateMeasurementCycle(FREQME_Type *base)

Force the termination of any measurement cycle currently in progress and resets RESULT or just reset RESULT if the module in idle state. 

Parameters:

base – FREQME peripheral base address. 







static inline void FREQME_EnableContinuousMode(FREQME_Type *base, bool enable)

Enable/disable Continuous mode. 

Parameters:

base – FREQME peripheral base address. 
enable – Used to enable/disable continuous mode,

true Enable Continuous mode.
false Disable Continuous mode. 









static inline bool FREQME_CheckContinuousMode(FREQME_Type *base)

Check whether continuous mode is enabled. 

Parameters:

base – FREQME peripheral base address. 


Return values:

True – Continuous mode is enabled, the measurement is performed continuously. 
False – Continuous mode is disabled. 







static inline void FREQME_SetOperateMode(FREQME_Type *base, freqme_operate_mode_t operateMode)

Set operate mode of freqme module. 

Parameters:

base – FREQME peripheral base address. 
operateMode – The operate mode to be set, please refer to freqme_operate_mode_t. 







static inline bool FREQME_CheckOperateMode(FREQME_Type *base)

Check module’s operate mode. 

Parameters:

base – FREQME peripheral base address. 


Return values:

True – Pulse width measurement mode. 
False – Frequency measurement mode. 







static inline void FREQME_SetMinExpectedValue(FREQME_Type *base, uint32_t minValue)

Set the minimum expected value for the measurement result. 

Parameters:

base – FREQME peripheral base address. 
minValue – The minimum value to set, please note that this value is 31 bits width. 







static inline void FREQME_SetMaxExpectedValue(FREQME_Type *base, uint32_t maxValue)

Set the maximum expected value for the measurement result. 

Parameters:

base – FREQME peripheral base address. 
maxValue – The maximum value to set, please note that this value is 31 bits width. 







uint32_t FREQME_CalculateTargetClkFreq(FREQME_Type *base, uint32_t refClkFrequency)

Calculate the frequency of selected target clock。 

Note
The formula: Ftarget = (RESULT - 2) * Freference / 2 ^ REF_SCALE.


Note
This function only useful when the operate mode is selected as frequency measurement mode.


Parameters:

base – FREQME peripheral base address. 
refClkFrequency – The frequency of reference clock. 


Returns:
The frequency of target clock the unit is Hz, if the output result is 0, please check the module’s operate mode. 






static inline uint8_t FREQME_GetReferenceClkScaleValue(FREQME_Type *base)

Get reference clock scaling factor. 

Parameters:

base – FREQME peripheral base address. 


Returns:
Reference clock scaling factor, the reference count cycle is 2 ^ ref_scale. 






static inline void FREQME_SetPulsePolarity(FREQME_Type *base, freqme_pulse_polarity_t pulsePolarity)

Set pulse polarity when operate mode is selected as Pulse Width Measurement mode. 

Parameters:

base – FREQME peripheral base address. 
pulsePolarity – The pulse polarity to be set, please refer to freqme_pulse_polarity_t. 







static inline bool FREQME_CheckPulsePolarity(FREQME_Type *base)

Check pulse polarity when the operate mode is selected as pulse width measurement mode. 

Parameters:

base – FREQME peripheral base address. 


Return values:

True – Low period. 
False – High period. 







static inline uint32_t FREQME_GetMeasurementResult(FREQME_Type *base)

Get measurement result. 

Parameters:

base – FREQME peripheral base address. 


Returns:
Measurement result. 






static inline uint32_t FREQME_GetInterruptStatusFlags(FREQME_Type *base)

Get interrupt status flags, such as overflow interrupt status flag, underflow interrupt status flag, and so on. 

Parameters:

base – FREQME peripheral base address. 


Returns:
Current interrupt status flags, should be the OR’ed value of _freqme_interrupt_status_flags. 






static inline void FREQME_ClearInterruptStatusFlags(FREQME_Type *base, uint32_t statusFlags)

Clear interrupt status flags. 

Parameters:

base – FREQME peripheral base address. 
statusFlags – The combination of interrupt status flags to clear, should be the OR’ed value of _freqme_interrupt_status_flags. 







static inline void FREQME_EnableInterrupts(FREQME_Type *base, uint32_t masks)

Enable interrupts, such as result ready interrupt, overflow interrupt and so on. 

Parameters:

base – FREQME peripheral base address. 
masks – The mask of interrupts to enable, should be the OR’ed value of _freqme_interrupt_enable. 







static inline void FREQME_DisableInterrupts(FREQME_Type *base, uint32_t masks)

Disable interrupts, such as result ready interrupt, overflow interrupt and so on. 

Parameters:

base – FREQME peripheral base address. 
masks – The mask of interrupts to disable, should be the OR’ed value of _freqme_interrupt_enable. 







FSL_FREQME_DRIVER_VERSION

FREQME driver version 2.1.4. 




enum _freqme_interrupt_status_flags

The enumeration of interrupt status flags. . 
Values:


enumerator kFREQME_UnderflowInterruptStatusFlag

Indicate the measurement is just done and the result is less than minimun value. 




enumerator kFREQME_OverflowInterruptStatusFlag

Indicate the measurement is just done and the result is greater than maximum value. 




enumerator kFREQME_ReadyInterruptStatusFlag

Indicate the measurement is just done and the result is ready to read. 




enumerator kFREQME_AllInterruptStatusFlags

All interrupt status flags. 






enum _freqme_interrupt_enable

The enumeration of interrupts, including underflow interrupt, overflow interrupt, and result ready interrupt. . 
Values:


enumerator kFREQME_UnderflowInterruptEnable

Enable interrupt when the result is less than minimum value. 




enumerator kFREQME_OverflowInterruptEnable

Enable interrupt when the result is greater than maximum value. 




enumerator kFREQME_ReadyInterruptEnable

Enable interrupt when a measurement completes and the result is ready. 






enum _freqme_operate_mode

FREQME module operate mode enumeration, including frequency measurement mode and pulse width measurement mode. 
Values:


enumerator kFREQME_FreqMeasurementMode

The module works in the frequency measurement mode. 




enumerator kFREOME_PulseWidthMeasurementMode

The module works in the pulse width measurement mode. 






enum _freqme_pulse_polarity

The enumeration of pulse polarity. 
Values:


enumerator kFREQME_PulseHighPeriod

Select high period of the reference clock. 




enumerator kFREQME_PulseLowPeriod

Select low period of the reference clock. 






typedef enum _freqme_operate_mode freqme_operate_mode_t

FREQME module operate mode enumeration, including frequency measurement mode and pulse width measurement mode. 




typedef enum _freqme_pulse_polarity freqme_pulse_polarity_t

The enumeration of pulse polarity. 




typedef union _freqme_mode_attribute freqme_mode_attribute_t

The union of operate mode attribute. 

Note
If the operate mode is selected as frequency measurement mode the member refClkScaleFactor should be used, if the operate mode is selected as pulse width measurement mode the member pulsePolarity should be used. 





typedef struct _freq_measure_config freq_measure_config_t

The structure of freqme module basic configuration, including operate mode, operate mode attribute and so on. 




union _freqme_mode_attribute


#include <fsl_freqme.h>
The union of operate mode attribute. 

Note
If the operate mode is selected as frequency measurement mode the member refClkScaleFactor should be used, if the operate mode is selected as pulse width measurement mode the member pulsePolarity should be used. 


Public Members


uint8_t refClkScaleFactor

Only useful in frequency measurement operate mode, used to set the reference clock counter scaling factor. 




freqme_pulse_polarity_t pulsePolarity

Only Useful in pulse width measurement operate mode, used to set period polarity. 







struct _freq_measure_config


#include <fsl_freqme.h>
The structure of freqme module basic configuration, including operate mode, operate mode attribute and so on. 

Public Members


freqme_operate_mode_t operateMode

Select operate mode, please refer to freqme_operate_mode_t. 




freqme_mode_attribute_t operateModeAttribute

Used to set the attribute of the selected operate mode, if the operate mode is selected as kFREQME_FreqMeasurementMode set freqme_mode_attribute_t::refClkScaleFactor, if operate mode is selected as kFREOME_PulseWidthMeasurementMode, please set freqme_mode_attribute_t::pulsePolarity. 




bool enableContinuousMode

Enable/disable continuous mode, if continuous mode is enable, the measurement is performed continuously and the result for the last completed measurement is available in the result register. 







LPI2C: Low Power Inter-Integrated Circuit Driver#


void LPI2C_DriverIRQHandler(uint32_t instance)

LPI2C driver IRQ handler common entry. 
This function provides the common IRQ request entry for LPI2C.

Parameters:

instance – LPI2C instance. 







FSL_LPI2C_DRIVER_VERSION

LPI2C driver version. 





LPI2C status return codes. 
Values:


enumerator kStatus_LPI2C_Busy

The master is already performing a transfer. 




enumerator kStatus_LPI2C_Idle

The slave driver is idle. 




enumerator kStatus_LPI2C_Nak

The slave device sent a NAK in response to a byte. 




enumerator kStatus_LPI2C_FifoError

FIFO under run or overrun. 




enumerator kStatus_LPI2C_BitError

Transferred bit was not seen on the bus. 




enumerator kStatus_LPI2C_ArbitrationLost

Arbitration lost error. 




enumerator kStatus_LPI2C_PinLowTimeout

SCL or SDA were held low longer than the timeout. 




enumerator kStatus_LPI2C_NoTransferInProgress

Attempt to abort a transfer when one is not in progress. 




enumerator kStatus_LPI2C_DmaRequestFail

DMA request failed. 




enumerator kStatus_LPI2C_Timeout

Timeout polling status flags. 






IRQn_Type const kLpi2cMasterIrqs[]

Array to map LPI2C instance number to IRQ number, used internally for LPI2C master interrupt and EDMA transactional APIs. 




IRQn_Type const kLpi2cSlaveIrqs[]





lpi2c_master_isr_t s_lpi2cMasterIsr

Pointer to master IRQ handler for each instance, used internally for LPI2C master interrupt and EDMA transactional APIs. 




void *s_lpi2cMasterHandle[]

Pointers to master handles for each instance, used internally for LPI2C master interrupt and EDMA transactional APIs. 




uint32_t LPI2C_GetInstance(LPI2C_Type *base)

Returns an instance number given a base address. 
If an invalid base address is passed, debug builds will assert. Release builds will just return instance number 0.

Parameters:

base – The LPI2C peripheral base address. 


Returns:
LPI2C instance number starting from 0. 






I2C_RETRY_TIMES

Retry times for waiting flag. 




LPI2C Master Driver#


void LPI2C_MasterGetDefaultConfig(lpi2c_master_config_t *masterConfig)

Provides a default configuration for the LPI2C master peripheral. 
This function provides the following default configuration for the LPI2C master peripheral: 
masterConfig->enableMaster            = true;
masterConfig->debugEnable             = false;
masterConfig->ignoreAck               = false;
masterConfig->pinConfig               = kLPI2C_2PinOpenDrain;
masterConfig->baudRate_Hz             = 100000U;
masterConfig->busIdleTimeout_ns       = 0;
masterConfig->pinLowTimeout_ns        = 0;
masterConfig->sdaGlitchFilterWidth_ns = 0;
masterConfig->sclGlitchFilterWidth_ns = 0;
masterConfig->hostRequest.enable      = false;
masterConfig->hostRequest.source      = kLPI2C_HostRequestExternalPin;
masterConfig->hostRequest.polarity    = kLPI2C_HostRequestPinActiveHigh;



After calling this function, you can override any settings in order to customize the configuration, prior to initializing the master driver with LPI2C_MasterInit().

Parameters:

masterConfig – [out] User provided configuration structure for default values. Refer to lpi2c_master_config_t. 







void LPI2C_MasterInit(LPI2C_Type *base, const lpi2c_master_config_t *masterConfig, uint32_t sourceClock_Hz)

Initializes the LPI2C master peripheral. 
This function enables the peripheral clock and initializes the LPI2C master peripheral as described by the user provided configuration. A software reset is performed prior to configuration.

Parameters:

base – The LPI2C peripheral base address. 
masterConfig – User provided peripheral configuration. Use LPI2C_MasterGetDefaultConfig() to get a set of defaults that you can override. 
sourceClock_Hz – Frequency in Hertz of the LPI2C functional clock. Used to calculate the baud rate divisors, filter widths, and timeout periods. 







void LPI2C_MasterDeinit(LPI2C_Type *base)

Deinitializes the LPI2C master peripheral. 
This function disables the LPI2C master peripheral and gates the clock. It also performs a software reset to restore the peripheral to reset conditions.

Parameters:

base – The LPI2C peripheral base address. 







void LPI2C_MasterConfigureDataMatch(LPI2C_Type *base, const lpi2c_data_match_config_t *matchConfig)

Configures LPI2C master data match feature. 

Parameters:

base – The LPI2C peripheral base address. 
matchConfig – Settings for the data match feature. 







status_t LPI2C_MasterCheckAndClearError(LPI2C_Type *base, uint32_t status)

Convert provided flags to status code, and clear any errors if present. 

Parameters:

base – The LPI2C peripheral base address. 
status – Current status flags value that will be checked. 


Return values:

kStatus_Success – 
kStatus_LPI2C_PinLowTimeout – 
kStatus_LPI2C_ArbitrationLost – 
kStatus_LPI2C_Nak – 
kStatus_LPI2C_FifoError – 







status_t LPI2C_CheckForBusyBus(LPI2C_Type *base)

Make sure the bus isn’t already busy. 
A busy bus is allowed if we are the one driving it.

Parameters:

base – The LPI2C peripheral base address. 


Return values:

kStatus_Success – 
kStatus_LPI2C_Busy – 







static inline void LPI2C_MasterReset(LPI2C_Type *base)

Performs a software reset. 
Restores the LPI2C master peripheral to reset conditions.

Parameters:

base – The LPI2C peripheral base address. 







static inline void LPI2C_MasterEnable(LPI2C_Type *base, bool enable)

Enables or disables the LPI2C module as master. 

Parameters:

base – The LPI2C peripheral base address. 
enable – Pass true to enable or false to disable the specified LPI2C as master. 







static inline uint32_t LPI2C_MasterGetStatusFlags(LPI2C_Type *base)

Gets the LPI2C master status flags. 
A bit mask with the state of all LPI2C master status flags is returned. For each flag, the corresponding bit in the return value is set if the flag is asserted.

See also
_lpi2c_master_flags



Parameters:

base – The LPI2C peripheral base address. 


Returns:
State of the status flags:

1: related status flag is set.
0: related status flag is not set. 








static inline void LPI2C_MasterClearStatusFlags(LPI2C_Type *base, uint32_t statusMask)

Clears the LPI2C master status flag state. 
The following status register flags can be cleared:

kLPI2C_MasterEndOfPacketFlag
kLPI2C_MasterStopDetectFlag
kLPI2C_MasterNackDetectFlag
kLPI2C_MasterArbitrationLostFlag
kLPI2C_MasterFifoErrFlag
kLPI2C_MasterPinLowTimeoutFlag
kLPI2C_MasterDataMatchFlag


Attempts to clear other flags has no effect.

See also
_lpi2c_master_flags. 



Parameters:

base – The LPI2C peripheral base address. 
statusMask – A bitmask of status flags that are to be cleared. The mask is composed of _lpi2c_master_flags enumerators OR’d together. You may pass the result of a previous call to LPI2C_MasterGetStatusFlags(). 







static inline void LPI2C_MasterEnableInterrupts(LPI2C_Type *base, uint32_t interruptMask)

Enables the LPI2C master interrupt requests. 
All flags except kLPI2C_MasterBusyFlag and kLPI2C_MasterBusBusyFlag can be enabled as interrupts.

Parameters:

base – The LPI2C peripheral base address. 
interruptMask – Bit mask of interrupts to enable. See _lpi2c_master_flags for the set of constants that should be OR’d together to form the bit mask. 







static inline void LPI2C_MasterDisableInterrupts(LPI2C_Type *base, uint32_t interruptMask)

Disables the LPI2C master interrupt requests. 
All flags except kLPI2C_MasterBusyFlag and kLPI2C_MasterBusBusyFlag can be enabled as interrupts.

Parameters:

base – The LPI2C peripheral base address. 
interruptMask – Bit mask of interrupts to disable. See _lpi2c_master_flags for the set of constants that should be OR’d together to form the bit mask. 







static inline uint32_t LPI2C_MasterGetEnabledInterrupts(LPI2C_Type *base)

Returns the set of currently enabled LPI2C master interrupt requests. 

Parameters:

base – The LPI2C peripheral base address. 


Returns:
A bitmask composed of _lpi2c_master_flags enumerators OR’d together to indicate the set of enabled interrupts. 






static inline void LPI2C_MasterEnableDMA(LPI2C_Type *base, bool enableTx, bool enableRx)

Enables or disables LPI2C master DMA requests. 

Parameters:

base – The LPI2C peripheral base address. 
enableTx – Enable flag for transmit DMA request. Pass true for enable, false for disable. 
enableRx – Enable flag for receive DMA request. Pass true for enable, false for disable. 







static inline uint32_t LPI2C_MasterGetTxFifoAddress(LPI2C_Type *base)

Gets LPI2C master transmit data register address for DMA transfer. 

Parameters:

base – The LPI2C peripheral base address. 


Returns:
The LPI2C Master Transmit Data Register address. 






static inline uint32_t LPI2C_MasterGetRxFifoAddress(LPI2C_Type *base)

Gets LPI2C master receive data register address for DMA transfer. 

Parameters:

base – The LPI2C peripheral base address. 


Returns:
The LPI2C Master Receive Data Register address. 






static inline void LPI2C_MasterSetWatermarks(LPI2C_Type *base, size_t txWords, size_t rxWords)

Sets the watermarks for LPI2C master FIFOs. 

Parameters:

base – The LPI2C peripheral base address. 
txWords – Transmit FIFO watermark value in words. The kLPI2C_MasterTxReadyFlag flag is set whenever the number of words in the transmit FIFO is equal or less than txWords. Writing a value equal or greater than the FIFO size is truncated. 
rxWords – Receive FIFO watermark value in words. The kLPI2C_MasterRxReadyFlag flag is set whenever the number of words in the receive FIFO is greater than rxWords. Writing a value equal or greater than the FIFO size is truncated. 







static inline void LPI2C_MasterGetFifoCounts(LPI2C_Type *base, size_t *rxCount, size_t *txCount)

Gets the current number of words in the LPI2C master FIFOs. 

Parameters:

base – The LPI2C peripheral base address. 
txCount – [out] Pointer through which the current number of words in the transmit FIFO is returned. Pass NULL if this value is not required. 
rxCount – [out] Pointer through which the current number of words in the receive FIFO is returned. Pass NULL if this value is not required. 







void LPI2C_MasterSetBaudRate(LPI2C_Type *base, uint32_t sourceClock_Hz, uint32_t baudRate_Hz)

Sets the I2C bus frequency for master transactions. 
The LPI2C master is automatically disabled and re-enabled as necessary to configure the baud rate. Do not call this function during a transfer, or the transfer is aborted.

Note
Please note that the second parameter is the clock frequency of LPI2C module, the third parameter means user configured bus baudrate, this implementation is different from other I2C drivers which use baudrate configuration as second parameter and source clock frequency as third parameter.


Parameters:

base – The LPI2C peripheral base address. 
sourceClock_Hz – LPI2C functional clock frequency in Hertz. 
baudRate_Hz – Requested bus frequency in Hertz. 







static inline bool LPI2C_MasterGetBusIdleState(LPI2C_Type *base)

Returns whether the bus is idle. 
Requires the master mode to be enabled.

Parameters:

base – The LPI2C peripheral base address. 


Return values:

true – Bus is busy. 
false – Bus is idle. 







status_t LPI2C_MasterStart(LPI2C_Type *base, uint8_t address, lpi2c_direction_t dir)

Sends a START signal and slave address on the I2C bus. 
This function is used to initiate a new master mode transfer. First, the bus state is checked to ensure that another master is not occupying the bus. Then a START signal is transmitted, followed by the 7-bit address specified in the address parameter. Note that this function does not actually wait until the START and address are successfully sent on the bus before returning.

Parameters:

base – The LPI2C peripheral base address. 
address – 7-bit slave device address, in bits [6:0]. 
dir – Master transfer direction, either kLPI2C_Read or kLPI2C_Write. This parameter is used to set the R/w bit (bit 0) in the transmitted slave address. 


Return values:

kStatus_Success – START signal and address were successfully enqueued in the transmit FIFO. 
kStatus_LPI2C_Busy – Another master is currently utilizing the bus. 







static inline status_t LPI2C_MasterRepeatedStart(LPI2C_Type *base, uint8_t address, lpi2c_direction_t dir)

Sends a repeated START signal and slave address on the I2C bus. 
This function is used to send a Repeated START signal when a transfer is already in progress. Like LPI2C_MasterStart(), it also sends the specified 7-bit address.

Note
This function exists primarily to maintain compatible APIs between LPI2C and I2C drivers, as well as to better document the intent of code that uses these APIs.


Parameters:

base – The LPI2C peripheral base address. 
address – 7-bit slave device address, in bits [6:0]. 
dir – Master transfer direction, either kLPI2C_Read or kLPI2C_Write. This parameter is used to set the R/w bit (bit 0) in the transmitted slave address. 


Return values:

kStatus_Success – Repeated START signal and address were successfully enqueued in the transmit FIFO. 
kStatus_LPI2C_Busy – Another master is currently utilizing the bus. 







status_t LPI2C_MasterSend(LPI2C_Type *base, void *txBuff, size_t txSize)

Performs a polling send transfer on the I2C bus. 
Sends up to txSize number of bytes to the previously addressed slave device. The slave may reply with a NAK to any byte in order to terminate the transfer early. If this happens, this function returns kStatus_LPI2C_Nak.

Parameters:

base – The LPI2C peripheral base address. 
txBuff – The pointer to the data to be transferred. 
txSize – The length in bytes of the data to be transferred. 


Return values:

kStatus_Success – Data was sent successfully. 
kStatus_LPI2C_Busy – Another master is currently utilizing the bus. 
kStatus_LPI2C_Nak – The slave device sent a NAK in response to a byte. 
kStatus_LPI2C_FifoError – FIFO under run or over run. 
kStatus_LPI2C_ArbitrationLost – Arbitration lost error. 
kStatus_LPI2C_PinLowTimeout – SCL or SDA were held low longer than the timeout. 







status_t LPI2C_MasterReceive(LPI2C_Type *base, void *rxBuff, size_t rxSize)

Performs a polling receive transfer on the I2C bus. 

Parameters:

base – The LPI2C peripheral base address. 
rxBuff – The pointer to the data to be transferred. 
rxSize – The length in bytes of the data to be transferred. 


Return values:

kStatus_Success – Data was received successfully. 
kStatus_LPI2C_Busy – Another master is currently utilizing the bus. 
kStatus_LPI2C_Nak – The slave device sent a NAK in response to a byte. 
kStatus_LPI2C_FifoError – FIFO under run or overrun. 
kStatus_LPI2C_ArbitrationLost – Arbitration lost error. 
kStatus_LPI2C_PinLowTimeout – SCL or SDA were held low longer than the timeout. 







status_t LPI2C_MasterStop(LPI2C_Type *base)

Sends a STOP signal on the I2C bus. 
This function does not return until the STOP signal is seen on the bus, or an error occurs.

Parameters:

base – The LPI2C peripheral base address. 


Return values:

kStatus_Success – The STOP signal was successfully sent on the bus and the transaction terminated. 
kStatus_LPI2C_Busy – Another master is currently utilizing the bus. 
kStatus_LPI2C_Nak – The slave device sent a NAK in response to a byte. 
kStatus_LPI2C_FifoError – FIFO under run or overrun. 
kStatus_LPI2C_ArbitrationLost – Arbitration lost error. 
kStatus_LPI2C_PinLowTimeout – SCL or SDA were held low longer than the timeout. 







status_t LPI2C_MasterTransferBlocking(LPI2C_Type *base, lpi2c_master_transfer_t *transfer)

Performs a master polling transfer on the I2C bus. 

Note
The API does not return until the transfer succeeds or fails due to error happens during transfer.


Parameters:

base – The LPI2C peripheral base address. 
transfer – Pointer to the transfer structure. 


Return values:

kStatus_Success – Data was received successfully. 
kStatus_LPI2C_Busy – Another master is currently utilizing the bus. 
kStatus_LPI2C_Nak – The slave device sent a NAK in response to a byte. 
kStatus_LPI2C_FifoError – FIFO under run or overrun. 
kStatus_LPI2C_ArbitrationLost – Arbitration lost error. 
kStatus_LPI2C_PinLowTimeout – SCL or SDA were held low longer than the timeout. 







void LPI2C_MasterTransferCreateHandle(LPI2C_Type *base, lpi2c_master_handle_t *handle, lpi2c_master_transfer_callback_t callback, void *userData)

Creates a new handle for the LPI2C master non-blocking APIs. 
The creation of a handle is for use with the non-blocking APIs. Once a handle is created, there is not a corresponding destroy handle. If the user wants to terminate a transfer, the LPI2C_MasterTransferAbort() API shall be called.

Note
The function also enables the NVIC IRQ for the input LPI2C. Need to notice that on some SoCs the LPI2C IRQ is connected to INTMUX, in this case user needs to enable the associated INTMUX IRQ in application.


Parameters:

base – The LPI2C peripheral base address. 
handle – [out] Pointer to the LPI2C master driver handle. 
callback – User provided pointer to the asynchronous callback function. 
userData – User provided pointer to the application callback data. 







status_t LPI2C_MasterTransferNonBlocking(LPI2C_Type *base, lpi2c_master_handle_t *handle, lpi2c_master_transfer_t *transfer)

Performs a non-blocking transaction on the I2C bus. 

Parameters:

base – The LPI2C peripheral base address. 
handle – Pointer to the LPI2C master driver handle. 
transfer – The pointer to the transfer descriptor. 


Return values:

kStatus_Success – The transaction was started successfully. 
kStatus_LPI2C_Busy – Either another master is currently utilizing the bus, or a non-blocking transaction is already in progress. 







status_t LPI2C_MasterTransferGetCount(LPI2C_Type *base, lpi2c_master_handle_t *handle, size_t *count)

Returns number of bytes transferred so far. 

Parameters:

base – The LPI2C peripheral base address. 
handle – Pointer to the LPI2C master driver handle. 
count – [out] Number of bytes transferred so far by the non-blocking transaction. 


Return values:

kStatus_Success – 
kStatus_NoTransferInProgress – There is not a non-blocking transaction currently in progress. 







void LPI2C_MasterTransferAbort(LPI2C_Type *base, lpi2c_master_handle_t *handle)

Terminates a non-blocking LPI2C master transmission early. 

Note
It is not safe to call this function from an IRQ handler that has a higher priority than the LPI2C peripheral’s IRQ priority.


Parameters:

base – The LPI2C peripheral base address. 
handle – Pointer to the LPI2C master driver handle. 







void LPI2C_MasterTransferHandleIRQ(LPI2C_Type *base, void *lpi2cMasterHandle)

Reusable routine to handle master interrupts. 

Note
This function does not need to be called unless you are reimplementing the nonblocking API’s interrupt handler routines to add special functionality. 


Parameters:

base – The LPI2C peripheral base address. 
lpi2cMasterHandle – Pointer to the LPI2C master driver handle. 







enum _lpi2c_master_flags

LPI2C master peripheral flags. 
The following status register flags can be cleared:

kLPI2C_MasterEndOfPacketFlag
kLPI2C_MasterStopDetectFlag
kLPI2C_MasterNackDetectFlag
kLPI2C_MasterArbitrationLostFlag
kLPI2C_MasterFifoErrFlag
kLPI2C_MasterPinLowTimeoutFlag
kLPI2C_MasterDataMatchFlag


All flags except kLPI2C_MasterBusyFlag and kLPI2C_MasterBusBusyFlag can be enabled as interrupts.

Note
These enums are meant to be OR’d together to form a bit mask. 

Values:


enumerator kLPI2C_MasterTxReadyFlag

Transmit data flag 




enumerator kLPI2C_MasterRxReadyFlag

Receive data flag 




enumerator kLPI2C_MasterEndOfPacketFlag

End Packet flag 




enumerator kLPI2C_MasterStopDetectFlag

Stop detect flag 




enumerator kLPI2C_MasterNackDetectFlag

NACK detect flag 




enumerator kLPI2C_MasterArbitrationLostFlag

Arbitration lost flag 




enumerator kLPI2C_MasterFifoErrFlag

FIFO error flag 




enumerator kLPI2C_MasterPinLowTimeoutFlag

Pin low timeout flag 




enumerator kLPI2C_MasterDataMatchFlag

Data match flag 




enumerator kLPI2C_MasterBusyFlag

Master busy flag 




enumerator kLPI2C_MasterBusBusyFlag

Bus busy flag 




enumerator kLPI2C_MasterClearFlags

All flags which are cleared by the driver upon starting a transfer. 




enumerator kLPI2C_MasterIrqFlags

IRQ sources enabled by the non-blocking transactional API. 




enumerator kLPI2C_MasterErrorFlags

Errors to check for. 






enum _lpi2c_direction

Direction of master and slave transfers. 
Values:


enumerator kLPI2C_Write

Master transmit. 




enumerator kLPI2C_Read

Master receive. 






enum _lpi2c_master_pin_config

LPI2C pin configuration. 
Values:


enumerator kLPI2C_2PinOpenDrain

LPI2C Configured for 2-pin open drain mode 




enumerator kLPI2C_2PinOutputOnly

LPI2C Configured for 2-pin output only mode (ultra-fast mode) 




enumerator kLPI2C_2PinPushPull

LPI2C Configured for 2-pin push-pull mode 




enumerator kLPI2C_4PinPushPull

LPI2C Configured for 4-pin push-pull mode 




enumerator kLPI2C_2PinOpenDrainWithSeparateSlave

LPI2C Configured for 2-pin open drain mode with separate LPI2C slave 




enumerator kLPI2C_2PinOutputOnlyWithSeparateSlave

LPI2C Configured for 2-pin output only mode(ultra-fast mode) with separate LPI2C slave 




enumerator kLPI2C_2PinPushPullWithSeparateSlave

LPI2C Configured for 2-pin push-pull mode with separate LPI2C slave 




enumerator kLPI2C_4PinPushPullWithInvertedOutput

LPI2C Configured for 4-pin push-pull mode(inverted outputs) 






enum _lpi2c_host_request_source

LPI2C master host request selection. 
Values:


enumerator kLPI2C_HostRequestExternalPin

Select the LPI2C_HREQ pin as the host request input 




enumerator kLPI2C_HostRequestInputTrigger

Select the input trigger as the host request input 






enum _lpi2c_host_request_polarity

LPI2C master host request pin polarity configuration. 
Values:


enumerator kLPI2C_HostRequestPinActiveLow

Configure the LPI2C_HREQ pin active low 




enumerator kLPI2C_HostRequestPinActiveHigh

Configure the LPI2C_HREQ pin active high 






enum _lpi2c_data_match_config_mode

LPI2C master data match configuration modes. 
Values:


enumerator kLPI2C_MatchDisabled

LPI2C Match Disabled 




enumerator kLPI2C_1stWordEqualsM0OrM1

LPI2C Match Enabled and 1st data word equals MATCH0 OR MATCH1 




enumerator kLPI2C_AnyWordEqualsM0OrM1

LPI2C Match Enabled and any data word equals MATCH0 OR MATCH1 




enumerator kLPI2C_1stWordEqualsM0And2ndWordEqualsM1

LPI2C Match Enabled and 1st data word equals MATCH0, 2nd data equals MATCH1 




enumerator kLPI2C_AnyWordEqualsM0AndNextWordEqualsM1

LPI2C Match Enabled and any data word equals MATCH0, next data equals MATCH1 




enumerator kLPI2C_1stWordAndM1EqualsM0AndM1

LPI2C Match Enabled and 1st data word and MATCH0 equals MATCH0 and MATCH1 




enumerator kLPI2C_AnyWordAndM1EqualsM0AndM1

LPI2C Match Enabled and any data word and MATCH0 equals MATCH0 and MATCH1 






enum _lpi2c_master_transfer_flags

Transfer option flags. 

Note
These enumerations are intended to be OR’d together to form a bit mask of options for the _lpi2c_master_transfer::flags field. 

Values:


enumerator kLPI2C_TransferDefaultFlag

Transfer starts with a start signal, stops with a stop signal. 




enumerator kLPI2C_TransferNoStartFlag

Don’t send a start condition, address, and sub address 




enumerator kLPI2C_TransferNoStopFlag

Don’t send a stop condition. 






typedef enum _lpi2c_direction lpi2c_direction_t

Direction of master and slave transfers. 




typedef enum _lpi2c_master_pin_config lpi2c_master_pin_config_t

LPI2C pin configuration. 




typedef enum _lpi2c_host_request_source lpi2c_host_request_source_t

LPI2C master host request selection. 




typedef enum _lpi2c_host_request_polarity lpi2c_host_request_polarity_t

LPI2C master host request pin polarity configuration. 




typedef struct _lpi2c_master_config lpi2c_master_config_t

Structure with settings to initialize the LPI2C master module. 
This structure holds configuration settings for the LPI2C peripheral. To initialize this structure to reasonable defaults, call the LPI2C_MasterGetDefaultConfig() function and pass a pointer to your configuration structure instance.
The configuration structure can be made constant so it resides in flash. 




typedef enum _lpi2c_data_match_config_mode lpi2c_data_match_config_mode_t

LPI2C master data match configuration modes. 




typedef struct _lpi2c_match_config lpi2c_data_match_config_t

LPI2C master data match configuration structure. 




typedef struct _lpi2c_master_transfer lpi2c_master_transfer_t

LPI2C master descriptor of the transfer. 




typedef struct _lpi2c_master_handle lpi2c_master_handle_t

LPI2C master handle of the transfer. 




typedef void (*lpi2c_master_transfer_callback_t)(LPI2C_Type *base, lpi2c_master_handle_t *handle, status_t completionStatus, void *userData)

Master completion callback function pointer type. 
This callback is used only for the non-blocking master transfer API. Specify the callback you wish to use in the call to LPI2C_MasterTransferCreateHandle().

Param base:
The LPI2C peripheral base address. 

Param handle:
Pointer to the LPI2C master driver handle. 

Param completionStatus:
Either kStatus_Success or an error code describing how the transfer completed. 

Param userData:
Arbitrary pointer-sized value passed from the application. 






typedef void (*lpi2c_master_isr_t)(LPI2C_Type *base, void *handle)

Typedef for master interrupt handler, used internally for LPI2C master interrupt and EDMA transactional APIs. 




struct _lpi2c_master_config


#include <fsl_lpi2c.h>
Structure with settings to initialize the LPI2C master module. 
This structure holds configuration settings for the LPI2C peripheral. To initialize this structure to reasonable defaults, call the LPI2C_MasterGetDefaultConfig() function and pass a pointer to your configuration structure instance.
The configuration structure can be made constant so it resides in flash. 

Public Members


bool enableMaster

Whether to enable master mode. 




bool enableDoze

Whether master is enabled in doze mode. 




bool debugEnable

Enable transfers to continue when halted in debug mode. 




bool ignoreAck

Whether to ignore ACK/NACK. 




lpi2c_master_pin_config_t pinConfig

The pin configuration option. 




uint32_t baudRate_Hz

Desired baud rate in Hertz. 




uint32_t busIdleTimeout_ns

Bus idle timeout in nanoseconds. Set to 0 to disable. 




uint32_t pinLowTimeout_ns

Pin low timeout in nanoseconds. Set to 0 to disable. 




uint8_t sdaGlitchFilterWidth_ns

Width in nanoseconds of glitch filter on SDA pin. Set to 0 to disable. 




uint8_t sclGlitchFilterWidth_ns

Width in nanoseconds of glitch filter on SCL pin. Set to 0 to disable. 




struct _lpi2c_master_config hostRequest

Host request options. 







struct _lpi2c_match_config


#include <fsl_lpi2c.h>
LPI2C master data match configuration structure. 

Public Members


lpi2c_data_match_config_mode_t matchMode

Data match configuration setting. 




bool rxDataMatchOnly

When set to true, received data is ignored until a successful match. 




uint32_t match0

Match value 0. 




uint32_t match1

Match value 1. 







struct _lpi2c_master_transfer


#include <fsl_lpi2c.h>
Non-blocking transfer descriptor structure. 
This structure is used to pass transaction parameters to the LPI2C_MasterTransferNonBlocking() API. 

Public Members


uint32_t flags

Bit mask of options for the transfer. See enumeration _lpi2c_master_transfer_flags for available options. Set to 0 or kLPI2C_TransferDefaultFlag for normal transfers. 




uint16_t slaveAddress

The 7-bit slave address. 




lpi2c_direction_t direction

Either kLPI2C_Read or kLPI2C_Write. 




uint32_t subaddress

Sub address. Transferred MSB first. 




size_t subaddressSize

Length of sub address to send in bytes. Maximum size is 4 bytes. 




void *data

Pointer to data to transfer. 




size_t dataSize

Number of bytes to transfer. 







struct _lpi2c_master_handle


#include <fsl_lpi2c.h>
Driver handle for master non-blocking APIs. 

Note
The contents of this structure are private and subject to change. 


Public Members


uint8_t state

Transfer state machine current state. 




uint16_t remainingBytes

Remaining byte count in current state. 




uint8_t *buf

Buffer pointer for current state. 




uint16_t commandBuffer[6]

LPI2C command sequence. When all 6 command words are used: Start&addr&write[1 word] + subaddr[4 words] + restart&addr&read[1 word] 




lpi2c_master_transfer_t transfer

Copy of the current transfer info. 




lpi2c_master_transfer_callback_t completionCallback

Callback function pointer. 




void *userData

Application data passed to callback. 







struct hostRequest


Public Members


bool enable

Enable host request. 




lpi2c_host_request_source_t source

Host request source. 




lpi2c_host_request_polarity_t polarity

Host request pin polarity. 







LPI2C Master DMA Driver#


void LPI2C_MasterCreateEDMAHandle(LPI2C_Type *base, lpi2c_master_edma_handle_t *handle, edma_handle_t *rxDmaHandle, edma_handle_t *txDmaHandle, lpi2c_master_edma_transfer_callback_t callback, void *userData)

Create a new handle for the LPI2C master DMA APIs. 
The creation of a handle is for use with the DMA APIs. Once a handle is created, there is not a corresponding destroy handle. If the user wants to terminate a transfer, the LPI2C_MasterTransferAbortEDMA() API shall be called.
For devices where the LPI2C send and receive DMA requests are OR’d together, the txDmaHandle parameter is ignored and may be set to NULL.

Parameters:

base – The LPI2C peripheral base address. 
handle – [out] Pointer to the LPI2C master driver handle. 
rxDmaHandle – Handle for the eDMA receive channel. Created by the user prior to calling this function. 
txDmaHandle – Handle for the eDMA transmit channel. Created by the user prior to calling this function. 
callback – User provided pointer to the asynchronous callback function. 
userData – User provided pointer to the application callback data. 







status_t LPI2C_MasterTransferEDMA(LPI2C_Type *base, lpi2c_master_edma_handle_t *handle, lpi2c_master_transfer_t *transfer)

Performs a non-blocking DMA-based transaction on the I2C bus. 
The callback specified when the handle was created is invoked when the transaction has completed.

Parameters:

base – The LPI2C peripheral base address. 
handle – Pointer to the LPI2C master driver handle. 
transfer – The pointer to the transfer descriptor. 


Return values:

kStatus_Success – The transaction was started successfully. 
kStatus_LPI2C_Busy – Either another master is currently utilizing the bus, or another DMA transaction is already in progress. 







status_t LPI2C_MasterTransferGetCountEDMA(LPI2C_Type *base, lpi2c_master_edma_handle_t *handle, size_t *count)

Returns number of bytes transferred so far. 

Parameters:

base – The LPI2C peripheral base address. 
handle – Pointer to the LPI2C master driver handle. 
count – [out] Number of bytes transferred so far by the non-blocking transaction. 


Return values:

kStatus_Success – 
kStatus_NoTransferInProgress – There is not a DMA transaction currently in progress. 







status_t LPI2C_MasterTransferAbortEDMA(LPI2C_Type *base, lpi2c_master_edma_handle_t *handle)

Terminates a non-blocking LPI2C master transmission early. 

Note
It is not safe to call this function from an IRQ handler that has a higher priority than the eDMA peripheral’s IRQ priority.


Parameters:

base – The LPI2C peripheral base address. 
handle – Pointer to the LPI2C master driver handle. 


Return values:

kStatus_Success – A transaction was successfully aborted. 
kStatus_LPI2C_Idle – There is not a DMA transaction currently in progress. 







typedef struct _lpi2c_master_edma_handle lpi2c_master_edma_handle_t

LPI2C master EDMA handle of the transfer. 




typedef void (*lpi2c_master_edma_transfer_callback_t)(LPI2C_Type *base, lpi2c_master_edma_handle_t *handle, status_t completionStatus, void *userData)

Master DMA completion callback function pointer type. 
This callback is used only for the non-blocking master transfer API. Specify the callback you wish to use in the call to LPI2C_MasterCreateEDMAHandle().

Param base:
The LPI2C peripheral base address. 

Param handle:
Handle associated with the completed transfer. 

Param completionStatus:
Either kStatus_Success or an error code describing how the transfer completed. 

Param userData:
Arbitrary pointer-sized value passed from the application. 






struct _lpi2c_master_edma_handle


#include <fsl_lpi2c_edma.h>
Driver handle for master DMA APIs. 

Note
The contents of this structure are private and subject to change. 


Public Members


LPI2C_Type *base

LPI2C base pointer. 




bool isBusy

Transfer state machine current state. 




uint8_t nbytes

eDMA minor byte transfer count initially configured. 




uint16_t commandBuffer[20]

LPI2C command sequence. When all 10 command words are used: Start&addr&write[1 word] + subaddr[4 words] + restart&addr&read[1 word] + receive&Size[4 words] 




lpi2c_master_transfer_t transfer

Copy of the current transfer info. 




lpi2c_master_edma_transfer_callback_t completionCallback

Callback function pointer. 




void *userData

Application data passed to callback. 




edma_handle_t *rx

Handle for receive DMA channel. 




edma_handle_t *tx

Handle for transmit DMA channel. 




edma_tcd_t tcds[3]

Software TCD. Three are allocated to provide enough room to align to 32-bytes. 







LPI2C Slave Driver#


void LPI2C_SlaveGetDefaultConfig(lpi2c_slave_config_t *slaveConfig)

Provides a default configuration for the LPI2C slave peripheral. 
This function provides the following default configuration for the LPI2C slave peripheral: 
slaveConfig->enableSlave               = true;
slaveConfig->address0                  = 0U;
slaveConfig->address1                  = 0U;
slaveConfig->addressMatchMode          = kLPI2C_MatchAddress0;
slaveConfig->filterDozeEnable          = true;
slaveConfig->filterEnable              = true;
slaveConfig->enableGeneralCall         = false;
slaveConfig->sclStall.enableAck        = false;
slaveConfig->sclStall.enableTx         = true;
slaveConfig->sclStall.enableRx         = true;
slaveConfig->sclStall.enableAddress    = true;
slaveConfig->ignoreAck                 = false;
slaveConfig->enableReceivedAddressRead = false;
slaveConfig->sdaGlitchFilterWidth_ns   = 0;
slaveConfig->sclGlitchFilterWidth_ns   = 0;
slaveConfig->dataValidDelay_ns         = 0;
slaveConfig->clockHoldTime_ns          = 0;



After calling this function, override any settings to customize the configuration, prior to initializing the master driver with LPI2C_SlaveInit(). Be sure to override at least the address0 member of the configuration structure with the desired slave address.

Parameters:

slaveConfig – [out] User provided configuration structure that is set to default values. Refer to lpi2c_slave_config_t. 







void LPI2C_SlaveInit(LPI2C_Type *base, const lpi2c_slave_config_t *slaveConfig, uint32_t sourceClock_Hz)

Initializes the LPI2C slave peripheral. 
This function enables the peripheral clock and initializes the LPI2C slave peripheral as described by the user provided configuration.

Parameters:

base – The LPI2C peripheral base address. 
slaveConfig – User provided peripheral configuration. Use LPI2C_SlaveGetDefaultConfig() to get a set of defaults that you can override. 
sourceClock_Hz – Frequency in Hertz of the LPI2C functional clock. Used to calculate the filter widths, data valid delay, and clock hold time. 







void LPI2C_SlaveDeinit(LPI2C_Type *base)

Deinitializes the LPI2C slave peripheral. 
This function disables the LPI2C slave peripheral and gates the clock. It also performs a software reset to restore the peripheral to reset conditions.

Parameters:

base – The LPI2C peripheral base address. 







static inline void LPI2C_SlaveReset(LPI2C_Type *base)

Performs a software reset of the LPI2C slave peripheral. 

Parameters:

base – The LPI2C peripheral base address. 







static inline void LPI2C_SlaveEnable(LPI2C_Type *base, bool enable)

Enables or disables the LPI2C module as slave. 

Parameters:

base – The LPI2C peripheral base address. 
enable – Pass true to enable or false to disable the specified LPI2C as slave. 







static inline uint32_t LPI2C_SlaveGetStatusFlags(LPI2C_Type *base)

Gets the LPI2C slave status flags. 
A bit mask with the state of all LPI2C slave status flags is returned. For each flag, the corresponding bit in the return value is set if the flag is asserted.

See also
_lpi2c_slave_flags



Parameters:

base – The LPI2C peripheral base address. 


Returns:
State of the status flags:

1: related status flag is set.
0: related status flag is not set. 








static inline void LPI2C_SlaveClearStatusFlags(LPI2C_Type *base, uint32_t statusMask)

Clears the LPI2C status flag state. 
The following status register flags can be cleared:

kLPI2C_SlaveRepeatedStartDetectFlag
kLPI2C_SlaveStopDetectFlag
kLPI2C_SlaveBitErrFlag
kLPI2C_SlaveFifoErrFlag


Attempts to clear other flags has no effect.

See also
_lpi2c_slave_flags. 



Parameters:

base – The LPI2C peripheral base address. 
statusMask – A bitmask of status flags that are to be cleared. The mask is composed of _lpi2c_slave_flags enumerators OR’d together. You may pass the result of a previous call to LPI2C_SlaveGetStatusFlags(). 







static inline void LPI2C_SlaveEnableInterrupts(LPI2C_Type *base, uint32_t interruptMask)

Enables the LPI2C slave interrupt requests. 
All flags except kLPI2C_SlaveBusyFlag and kLPI2C_SlaveBusBusyFlag can be enabled as interrupts.

Parameters:

base – The LPI2C peripheral base address. 
interruptMask – Bit mask of interrupts to enable. See _lpi2c_slave_flags for the set of constants that should be OR’d together to form the bit mask. 







static inline void LPI2C_SlaveDisableInterrupts(LPI2C_Type *base, uint32_t interruptMask)

Disables the LPI2C slave interrupt requests. 
All flags except kLPI2C_SlaveBusyFlag and kLPI2C_SlaveBusBusyFlag can be enabled as interrupts.

Parameters:

base – The LPI2C peripheral base address. 
interruptMask – Bit mask of interrupts to disable. See _lpi2c_slave_flags for the set of constants that should be OR’d together to form the bit mask. 







static inline uint32_t LPI2C_SlaveGetEnabledInterrupts(LPI2C_Type *base)

Returns the set of currently enabled LPI2C slave interrupt requests. 

Parameters:

base – The LPI2C peripheral base address. 


Returns:
A bitmask composed of _lpi2c_slave_flags enumerators OR’d together to indicate the set of enabled interrupts. 






static inline void LPI2C_SlaveEnableDMA(LPI2C_Type *base, bool enableAddressValid, bool enableRx, bool enableTx)

Enables or disables the LPI2C slave peripheral DMA requests. 

Parameters:

base – The LPI2C peripheral base address. 
enableAddressValid – Enable flag for the address valid DMA request. Pass true for enable, false for disable. The address valid DMA request is shared with the receive data DMA request. 
enableRx – Enable flag for the receive data DMA request. Pass true for enable, false for disable. 
enableTx – Enable flag for the transmit data DMA request. Pass true for enable, false for disable. 







static inline bool LPI2C_SlaveGetBusIdleState(LPI2C_Type *base)

Returns whether the bus is idle. 
Requires the slave mode to be enabled.

Parameters:

base – The LPI2C peripheral base address. 


Return values:

true – Bus is busy. 
false – Bus is idle. 







static inline void LPI2C_SlaveTransmitAck(LPI2C_Type *base, bool ackOrNack)

Transmits either an ACK or NAK on the I2C bus in response to a byte from the master. 
Use this function to send an ACK or NAK when the kLPI2C_SlaveTransmitAckFlag is asserted. This only happens if you enable the sclStall.enableAck field of the lpi2c_slave_config_t configuration structure used to initialize the slave peripheral.

Parameters:

base – The LPI2C peripheral base address. 
ackOrNack – Pass true for an ACK or false for a NAK. 







static inline void LPI2C_SlaveEnableAckStall(LPI2C_Type *base, bool enable)

Enables or disables ACKSTALL. 
When enables ACKSTALL, software can transmit either an ACK or NAK on the I2C bus in response to a byte from the master.

Parameters:

base – The LPI2C peripheral base address. 
enable – True will enable ACKSTALL,false will disable ACKSTALL. 







static inline uint32_t LPI2C_SlaveGetReceivedAddress(LPI2C_Type *base)

Returns the slave address sent by the I2C master. 
This function should only be called if the kLPI2C_SlaveAddressValidFlag is asserted.

Parameters:

base – The LPI2C peripheral base address. 


Returns:
The 8-bit address matched by the LPI2C slave. Bit 0 contains the R/w direction bit, and the 7-bit slave address is in the upper 7 bits. 






status_t LPI2C_SlaveSend(LPI2C_Type *base, void *txBuff, size_t txSize, size_t *actualTxSize)

Performs a polling send transfer on the I2C bus. 

Parameters:

base – The LPI2C peripheral base address. 
txBuff – The pointer to the data to be transferred. 
txSize – The length in bytes of the data to be transferred. 
actualTxSize – [out] 


Returns:
Error or success status returned by API. 






status_t LPI2C_SlaveReceive(LPI2C_Type *base, void *rxBuff, size_t rxSize, size_t *actualRxSize)

Performs a polling receive transfer on the I2C bus. 

Parameters:

base – The LPI2C peripheral base address. 
rxBuff – The pointer to the data to be transferred. 
rxSize – The length in bytes of the data to be transferred. 
actualRxSize – [out] 


Returns:
Error or success status returned by API. 






void LPI2C_SlaveTransferCreateHandle(LPI2C_Type *base, lpi2c_slave_handle_t *handle, lpi2c_slave_transfer_callback_t callback, void *userData)

Creates a new handle for the LPI2C slave non-blocking APIs. 
The creation of a handle is for use with the non-blocking APIs. Once a handle is created, there is not a corresponding destroy handle. If the user wants to terminate a transfer, the LPI2C_SlaveTransferAbort() API shall be called.

Note
The function also enables the NVIC IRQ for the input LPI2C. Need to notice that on some SoCs the LPI2C IRQ is connected to INTMUX, in this case user needs to enable the associated INTMUX IRQ in application.


Parameters:

base – The LPI2C peripheral base address. 
handle – [out] Pointer to the LPI2C slave driver handle. 
callback – User provided pointer to the asynchronous callback function. 
userData – User provided pointer to the application callback data. 







status_t LPI2C_SlaveTransferNonBlocking(LPI2C_Type *base, lpi2c_slave_handle_t *handle, uint32_t eventMask)

Starts accepting slave transfers. 
Call this API after calling I2C_SlaveInit() and LPI2C_SlaveTransferCreateHandle() to start processing transactions driven by an I2C master. The slave monitors the I2C bus and pass events to the callback that was passed into the call to LPI2C_SlaveTransferCreateHandle(). The callback is always invoked from the interrupt context.
The set of events received by the callback is customizable. To do so, set the eventMask parameter to the OR’d combination of lpi2c_slave_transfer_event_t enumerators for the events you wish to receive. The kLPI2C_SlaveTransmitEvent and kLPI2C_SlaveReceiveEvent events are always enabled and do not need to be included in the mask. Alternatively, you can pass 0 to get a default set of only the transmit and receive events that are always enabled. In addition, the kLPI2C_SlaveAllEvents constant is provided as a convenient way to enable all events.

Parameters:

base – The LPI2C peripheral base address. 
handle – Pointer to lpi2c_slave_handle_t structure which stores the transfer state. 
eventMask – Bit mask formed by OR’ing together lpi2c_slave_transfer_event_t enumerators to specify which events to send to the callback. Other accepted values are 0 to get a default set of only the transmit and receive events, and kLPI2C_SlaveAllEvents to enable all events.


Return values:

kStatus_Success – Slave transfers were successfully started. 
kStatus_LPI2C_Busy – Slave transfers have already been started on this handle. 







status_t LPI2C_SlaveTransferGetCount(LPI2C_Type *base, lpi2c_slave_handle_t *handle, size_t *count)

Gets the slave transfer status during a non-blocking transfer. 

Parameters:

base – The LPI2C peripheral base address. 
handle – Pointer to i2c_slave_handle_t structure. 
count – [out] Pointer to a value to hold the number of bytes transferred. May be NULL if the count is not required. 


Return values:

kStatus_Success – 
kStatus_NoTransferInProgress – 







void LPI2C_SlaveTransferAbort(LPI2C_Type *base, lpi2c_slave_handle_t *handle)

Aborts the slave non-blocking transfers. 

Note
This API could be called at any time to stop slave for handling the bus events. 


Parameters:

base – The LPI2C peripheral base address. 
handle – Pointer to lpi2c_slave_handle_t structure which stores the transfer state. 







void LPI2C_SlaveTransferHandleIRQ(LPI2C_Type *base, lpi2c_slave_handle_t *handle)

Reusable routine to handle slave interrupts. 

Note
This function does not need to be called unless you are reimplementing the non blocking API’s interrupt handler routines to add special functionality. 


Parameters:

base – The LPI2C peripheral base address. 
handle – Pointer to lpi2c_slave_handle_t structure which stores the transfer state. 







enum _lpi2c_slave_flags

LPI2C slave peripheral flags. 
The following status register flags can be cleared:

kLPI2C_SlaveRepeatedStartDetectFlag
kLPI2C_SlaveStopDetectFlag
kLPI2C_SlaveBitErrFlag
kLPI2C_SlaveFifoErrFlag


All flags except kLPI2C_SlaveBusyFlag and kLPI2C_SlaveBusBusyFlag can be enabled as interrupts.

Note
These enumerations are meant to be OR’d together to form a bit mask. 

Values:


enumerator kLPI2C_SlaveTxReadyFlag

Transmit data flag 




enumerator kLPI2C_SlaveRxReadyFlag

Receive data flag 




enumerator kLPI2C_SlaveAddressValidFlag

Address valid flag 




enumerator kLPI2C_SlaveTransmitAckFlag

Transmit ACK flag 




enumerator kLPI2C_SlaveRepeatedStartDetectFlag

Repeated start detect flag 




enumerator kLPI2C_SlaveStopDetectFlag

Stop detect flag 




enumerator kLPI2C_SlaveBitErrFlag

Bit error flag 




enumerator kLPI2C_SlaveFifoErrFlag

FIFO error flag 




enumerator kLPI2C_SlaveAddressMatch0Flag

Address match 0 flag 




enumerator kLPI2C_SlaveAddressMatch1Flag

Address match 1 flag 




enumerator kLPI2C_SlaveGeneralCallFlag

General call flag 




enumerator kLPI2C_SlaveBusyFlag

Master busy flag 




enumerator kLPI2C_SlaveBusBusyFlag

Bus busy flag 




enumerator kLPI2C_SlaveClearFlags

All flags which are cleared by the driver upon starting a transfer. 




enumerator kLPI2C_SlaveIrqFlags

IRQ sources enabled by the non-blocking transactional API. 




enumerator kLPI2C_SlaveErrorFlags

Errors to check for. 






enum _lpi2c_slave_address_match

LPI2C slave address match options. 
Values:


enumerator kLPI2C_MatchAddress0

Match only address 0. 




enumerator kLPI2C_MatchAddress0OrAddress1

Match either address 0 or address 1. 




enumerator kLPI2C_MatchAddress0ThroughAddress1

Match a range of slave addresses from address 0 through address 1. 






enum _lpi2c_slave_transfer_event

Set of events sent to the callback for non blocking slave transfers. 
These event enumerations are used for two related purposes. First, a bit mask created by OR’ing together events is passed to LPI2C_SlaveTransferNonBlocking() in order to specify which events to enable. Then, when the slave callback is invoked, it is passed the current event through its transfer parameter.

Note
These enumerations are meant to be OR’d together to form a bit mask of events. 

Values:


enumerator kLPI2C_SlaveAddressMatchEvent

Received the slave address after a start or repeated start. 




enumerator kLPI2C_SlaveTransmitEvent

Callback is requested to provide data to transmit (slave-transmitter role). 




enumerator kLPI2C_SlaveReceiveEvent

Callback is requested to provide a buffer in which to place received data (slave-receiver role). 




enumerator kLPI2C_SlaveTransmitAckEvent

Callback needs to either transmit an ACK or NACK. 




enumerator kLPI2C_SlaveRepeatedStartEvent

A repeated start was detected. 




enumerator kLPI2C_SlaveCompletionEvent

A stop was detected, completing the transfer. 




enumerator kLPI2C_SlaveAllEvents

Bit mask of all available events. 






typedef enum _lpi2c_slave_address_match lpi2c_slave_address_match_t

LPI2C slave address match options. 




typedef struct _lpi2c_slave_config lpi2c_slave_config_t

Structure with settings to initialize the LPI2C slave module. 
This structure holds configuration settings for the LPI2C slave peripheral. To initialize this structure to reasonable defaults, call the LPI2C_SlaveGetDefaultConfig() function and pass a pointer to your configuration structure instance.
The configuration structure can be made constant so it resides in flash. 




typedef enum _lpi2c_slave_transfer_event lpi2c_slave_transfer_event_t

Set of events sent to the callback for non blocking slave transfers. 
These event enumerations are used for two related purposes. First, a bit mask created by OR’ing together events is passed to LPI2C_SlaveTransferNonBlocking() in order to specify which events to enable. Then, when the slave callback is invoked, it is passed the current event through its transfer parameter.

Note
These enumerations are meant to be OR’d together to form a bit mask of events. 





typedef struct _lpi2c_slave_transfer lpi2c_slave_transfer_t

LPI2C slave transfer structure. 




typedef struct _lpi2c_slave_handle lpi2c_slave_handle_t

LPI2C slave handle structure. 




typedef void (*lpi2c_slave_transfer_callback_t)(LPI2C_Type *base, lpi2c_slave_transfer_t *transfer, void *userData)

Slave event callback function pointer type. 
This callback is used only for the slave non-blocking transfer API. To install a callback, use the LPI2C_SlaveSetCallback() function after you have created a handle.

Param base:
Base address for the LPI2C instance on which the event occurred. 

Param transfer:
Pointer to transfer descriptor containing values passed to and/or from the callback. 

Param userData:
Arbitrary pointer-sized value passed from the application. 






struct _lpi2c_slave_config


#include <fsl_lpi2c.h>
Structure with settings to initialize the LPI2C slave module. 
This structure holds configuration settings for the LPI2C slave peripheral. To initialize this structure to reasonable defaults, call the LPI2C_SlaveGetDefaultConfig() function and pass a pointer to your configuration structure instance.
The configuration structure can be made constant so it resides in flash. 

Public Members


bool enableSlave

Enable slave mode. 




uint8_t address0

Slave’s 7-bit address. 




uint8_t address1

Alternate slave 7-bit address. 




lpi2c_slave_address_match_t addressMatchMode

Address matching options. 




bool filterDozeEnable

Enable digital glitch filter in doze mode. 




bool filterEnable

Enable digital glitch filter. 




bool enableGeneralCall

Enable general call address matching. 




struct _lpi2c_slave_config sclStall

SCL stall enable options. 




bool ignoreAck

Continue transfers after a NACK is detected. 




bool enableReceivedAddressRead

Enable reading the address received address as the first byte of data. 




uint32_t sdaGlitchFilterWidth_ns

Width in nanoseconds of the digital filter on the SDA signal. Set to 0 to disable. 




uint32_t sclGlitchFilterWidth_ns

Width in nanoseconds of the digital filter on the SCL signal. Set to 0 to disable. 




uint32_t dataValidDelay_ns

Width in nanoseconds of the data valid delay. 




uint32_t clockHoldTime_ns

Width in nanoseconds of the clock hold time. 







struct _lpi2c_slave_transfer


#include <fsl_lpi2c.h>
LPI2C slave transfer structure. 

Public Members


lpi2c_slave_transfer_event_t event

Reason the callback is being invoked. 




uint8_t receivedAddress

Matching address send by master. 




uint8_t *data

Transfer buffer 




size_t dataSize

Transfer size 




status_t completionStatus

Success or error code describing how the transfer completed. Only applies for kLPI2C_SlaveCompletionEvent. 




size_t transferredCount

Number of bytes actually transferred since start or last repeated start. 







struct _lpi2c_slave_handle


#include <fsl_lpi2c.h>
LPI2C slave handle structure. 

Note
The contents of this structure are private and subject to change. 


Public Members


lpi2c_slave_transfer_t transfer

LPI2C slave transfer copy. 




bool isBusy

Whether transfer is busy. 




bool wasTransmit

Whether the last transfer was a transmit. 




uint32_t eventMask

Mask of enabled events. 




uint32_t transferredCount

Count of bytes transferred. 




lpi2c_slave_transfer_callback_t callback

Callback function called at transfer event. 




void *userData

Callback parameter passed to callback. 







struct sclStall


Public Members


bool enableAck

Enables SCL clock stretching during slave-transmit address byte(s) and slave-receiver address and data byte(s) to allow software to write the Transmit ACK Register before the ACK or NACK is transmitted. Clock stretching occurs when transmitting the 9th bit. When enableAckSCLStall is enabled, there is no need to set either enableRxDataSCLStall or enableAddressSCLStall. 




bool enableTx

Enables SCL clock stretching when the transmit data flag is set during a slave-transmit transfer. 




bool enableRx

Enables SCL clock stretching when receive data flag is set during a slave-receive transfer. 




bool enableAddress

Enables SCL clock stretching when the address valid flag is asserted. 







LPSPI: Low Power Serial Peripheral Interface#


LPSPI Peripheral driver#


void LPSPI_MasterInit(LPSPI_Type *base, const lpspi_master_config_t *masterConfig, uint32_t srcClock_Hz)

Initializes the LPSPI master. 

Parameters:

base – LPSPI peripheral address. 
masterConfig – Pointer to structure lpspi_master_config_t. 
srcClock_Hz – Module source input clock in Hertz 







void LPSPI_MasterGetDefaultConfig(lpspi_master_config_t *masterConfig)

Sets the lpspi_master_config_t structure to default values. 
This API initializes the configuration structure for LPSPI_MasterInit(). The initialized structure can remain unchanged in LPSPI_MasterInit(), or can be modified before calling the LPSPI_MasterInit(). Example: 
lpspi_master_config_t  masterConfig;
LPSPI_MasterGetDefaultConfig(&masterConfig);


 

Parameters:

masterConfig – pointer to lpspi_master_config_t structure 







void LPSPI_SlaveInit(LPSPI_Type *base, const lpspi_slave_config_t *slaveConfig)

LPSPI slave configuration. 

Parameters:

base – LPSPI peripheral address. 
slaveConfig – Pointer to a structure lpspi_slave_config_t. 







void LPSPI_SlaveGetDefaultConfig(lpspi_slave_config_t *slaveConfig)

Sets the lpspi_slave_config_t structure to default values. 
This API initializes the configuration structure for LPSPI_SlaveInit(). The initialized structure can remain unchanged in LPSPI_SlaveInit() or can be modified before calling the LPSPI_SlaveInit(). Example: 
lpspi_slave_config_t  slaveConfig;
LPSPI_SlaveGetDefaultConfig(&slaveConfig);


 

Parameters:

slaveConfig – pointer to lpspi_slave_config_t structure. 







void LPSPI_Deinit(LPSPI_Type *base)

De-initializes the LPSPI peripheral. Call this API to disable the LPSPI clock. 

Parameters:

base – LPSPI peripheral address. 







void LPSPI_Reset(LPSPI_Type *base)

Restores the LPSPI peripheral to reset state. Note that this function sets all registers to reset state. As a result, the LPSPI module can’t work after calling this API. 

Parameters:

base – LPSPI peripheral address. 







uint32_t LPSPI_GetInstance(LPSPI_Type *base)

Get the LPSPI instance from peripheral base address. 

Parameters:

base – LPSPI peripheral base address. 


Returns:
LPSPI instance. 






static inline void LPSPI_Enable(LPSPI_Type *base, bool enable)

Enables the LPSPI peripheral and sets the MCR MDIS to 0. 

Parameters:

base – LPSPI peripheral address. 
enable – Pass true to enable module, false to disable module. 







static inline uint32_t LPSPI_GetStatusFlags(LPSPI_Type *base)

Gets the LPSPI status flag state. 

Parameters:

base – LPSPI peripheral address. 


Returns:
The LPSPI status(in SR register). 






static inline uint8_t LPSPI_GetTxFifoSize(LPSPI_Type *base)

Gets the LPSPI Tx FIFO size. 

Parameters:

base – LPSPI peripheral address. 


Returns:
The LPSPI Tx FIFO size. 






static inline uint8_t LPSPI_GetRxFifoSize(LPSPI_Type *base)

Gets the LPSPI Rx FIFO size. 

Parameters:

base – LPSPI peripheral address. 


Returns:
The LPSPI Rx FIFO size. 






static inline uint32_t LPSPI_GetTxFifoCount(LPSPI_Type *base)

Gets the LPSPI Tx FIFO count. 

Parameters:

base – LPSPI peripheral address. 


Returns:
The number of words in the transmit FIFO. 






static inline uint32_t LPSPI_GetRxFifoCount(LPSPI_Type *base)

Gets the LPSPI Rx FIFO count. 

Parameters:

base – LPSPI peripheral address. 


Returns:
The number of words in the receive FIFO. 






static inline void LPSPI_ClearStatusFlags(LPSPI_Type *base, uint32_t statusFlags)

Clears the LPSPI status flag. 
This function clears the desired status bit by using a write-1-to-clear. The user passes in the base and the desired status flag bit to clear. The list of status flags is defined in the _lpspi_flags. Example usage: 
LPSPI_ClearStatusFlags(base, kLPSPI_TxDataRequestFlag|kLPSPI_RxDataReadyFlag);




Parameters:

base – LPSPI peripheral address. 
statusFlags – The status flag used from type _lpspi_flags. 







static inline uint32_t LPSPI_GetTcr(LPSPI_Type *base)





static inline void LPSPI_EnableInterrupts(LPSPI_Type *base, uint32_t mask)

Enables the LPSPI interrupts. 
This function configures the various interrupt masks of the LPSPI. The parameters are base and an interrupt mask. Note that, for Tx fill and Rx FIFO drain requests, enabling the interrupt request disables the DMA request.
LPSPI_EnableInterrupts(base, kLPSPI_TxInterruptEnable | kLPSPI_RxInterruptEnable );



Parameters:

base – LPSPI peripheral address. 
mask – The interrupt mask; Use the enum _lpspi_interrupt_enable. 







static inline void LPSPI_DisableInterrupts(LPSPI_Type *base, uint32_t mask)

Disables the LPSPI interrupts. 
LPSPI_DisableInterrupts(base, kLPSPI_TxInterruptEnable | kLPSPI_RxInterruptEnable );



Parameters:

base – LPSPI peripheral address. 
mask – The interrupt mask; Use the enum _lpspi_interrupt_enable. 







static inline void LPSPI_EnableDMA(LPSPI_Type *base, uint32_t mask)

Enables the LPSPI DMA request. 
This function configures the Rx and Tx DMA mask of the LPSPI. The parameters are base and a DMA mask. 
LPSPI_EnableDMA(base, kLPSPI_TxDmaEnable | kLPSPI_RxDmaEnable);




Parameters:

base – LPSPI peripheral address. 
mask – The interrupt mask; Use the enum _lpspi_dma_enable. 







static inline void LPSPI_DisableDMA(LPSPI_Type *base, uint32_t mask)

Disables the LPSPI DMA request. 
This function configures the Rx and Tx DMA mask of the LPSPI. The parameters are base and a DMA mask. 
SPI_DisableDMA(base, kLPSPI_TxDmaEnable | kLPSPI_RxDmaEnable);




Parameters:

base – LPSPI peripheral address. 
mask – The interrupt mask; Use the enum _lpspi_dma_enable. 







static inline uint32_t LPSPI_GetTxRegisterAddress(LPSPI_Type *base)

Gets the LPSPI Transmit Data Register address for a DMA operation. 
This function gets the LPSPI Transmit Data Register address because this value is needed for the DMA operation. This function can be used for either master or slave mode.

Parameters:

base – LPSPI peripheral address. 


Returns:
The LPSPI Transmit Data Register address. 






static inline uint32_t LPSPI_GetRxRegisterAddress(LPSPI_Type *base)

Gets the LPSPI Receive Data Register address for a DMA operation. 
This function gets the LPSPI Receive Data Register address because this value is needed for the DMA operation. This function can be used for either master or slave mode.

Parameters:

base – LPSPI peripheral address. 


Returns:
The LPSPI Receive Data Register address. 






bool LPSPI_CheckTransferArgument(LPSPI_Type *base, lpspi_transfer_t *transfer, bool isEdma)

Check the argument for transfer . 

Parameters:

base – LPSPI peripheral address. 
transfer – the transfer struct to be used. 
isEdma – True to check for EDMA transfer, false to check interrupt non-blocking transfer 


Returns:
Return true for right and false for wrong. 






static inline void LPSPI_SetMasterSlaveMode(LPSPI_Type *base, lpspi_master_slave_mode_t mode)

Configures the LPSPI for either master or slave. 
Note that the CFGR1 should only be written when the LPSPI is disabled (LPSPIx_CR_MEN = 0).

Parameters:

base – LPSPI peripheral address. 
mode – Mode setting (master or slave) of type lpspi_master_slave_mode_t. 







static inline void LPSPI_SelectTransferPCS(LPSPI_Type *base, lpspi_which_pcs_t select)

Configures the peripheral chip select used for the transfer. 

Parameters:

base – LPSPI peripheral address. 
select – LPSPI Peripheral Chip Select (PCS) configuration. 







static inline void LPSPI_SetPCSContinous(LPSPI_Type *base, bool IsContinous)

Set the PCS signal to continuous or uncontinuous mode. 

Note
In master mode, continuous transfer will keep the PCS asserted at the end of the frame size, until a command word is received that starts a new frame. So PCS must be set back to uncontinuous when transfer finishes. In slave mode, when continuous transfer is enabled, the LPSPI will only transmit the first frame size bits, after that the LPSPI will transmit received data back (assuming a 32-bit shift register).


Parameters:

base – LPSPI peripheral address. 
IsContinous – True to set the transfer PCS to continuous mode, false to set to uncontinuous mode. 







static inline bool LPSPI_IsMaster(LPSPI_Type *base)

Returns whether the LPSPI module is in master mode. 

Parameters:

base – LPSPI peripheral address. 


Returns:
Returns true if the module is in master mode or false if the module is in slave mode. 






static inline void LPSPI_FlushFifo(LPSPI_Type *base, bool flushTxFifo, bool flushRxFifo)

Flushes the LPSPI FIFOs. 

Parameters:

base – LPSPI peripheral address. 
flushTxFifo – Flushes (true) the Tx FIFO, else do not flush (false) the Tx FIFO. 
flushRxFifo – Flushes (true) the Rx FIFO, else do not flush (false) the Rx FIFO. 







static inline void LPSPI_SetFifoWatermarks(LPSPI_Type *base, uint32_t txWater, uint32_t rxWater)

Sets the transmit and receive FIFO watermark values. 
This function allows the user to set the receive and transmit FIFO watermarks. The function does not compare the watermark settings to the FIFO size. The FIFO watermark should not be equal to or greater than the FIFO size. It is up to the higher level driver to make this check.

Parameters:

base – LPSPI peripheral address. 
txWater – The TX FIFO watermark value. Writing a value equal or greater than the FIFO size is truncated. 
rxWater – The RX FIFO watermark value. Writing a value equal or greater than the FIFO size is truncated. 







static inline void LPSPI_SetAllPcsPolarity(LPSPI_Type *base, uint32_t mask)

Configures all LPSPI peripheral chip select polarities simultaneously. 
Note that the CFGR1 should only be written when the LPSPI is disabled (LPSPIx_CR_MEN = 0).
This is an example: PCS0 and PCS1 set to active low and other PCSs set to active high. Note that the number of PCS is device-specific. 
LPSPI_SetAllPcsPolarity(base, kLPSPI_Pcs0ActiveLow | kLPSPI_Pcs1ActiveLow);




Parameters:

base – LPSPI peripheral address. 
mask – The PCS polarity mask; Use the enum _lpspi_pcs_polarity. 







static inline void LPSPI_SetFrameSize(LPSPI_Type *base, uint32_t frameSize)

Configures the frame size. 
The minimum frame size is 8-bits and the maximum frame size is 4096-bits. If the frame size is less than or equal to 32-bits, the word size and frame size are identical. If the frame size is greater than 32-bits, the word size is 32-bits for each word except the last (the last word contains the remainder bits if the frame size is not divisible by 32). The minimum word size is 2-bits. A frame size of 33-bits (or similar) is not supported.
Note 1: The transmit command register should be initialized before enabling the LPSPI in slave mode, although the command register does not update until after the LPSPI is enabled. After it is enabled, the transmit command register should only be changed if the LPSPI is idle.
Note 2: The transmit and command FIFO is a combined FIFO that includes both transmit data and command words. That means the TCR register should be written to when the Tx FIFO is not full.

Parameters:

base – LPSPI peripheral address. 
frameSize – The frame size in number of bits. 







uint32_t LPSPI_MasterSetBaudRate(LPSPI_Type *base, uint32_t baudRate_Bps, uint32_t srcClock_Hz, uint32_t *tcrPrescaleValue)

Sets the LPSPI baud rate in bits per second. 
This function takes in the desired bitsPerSec (baud rate) and calculates the nearest possible baud rate without exceeding the desired baud rate and returns the calculated baud rate in bits-per-second. It requires the caller to provide the frequency of the module source clock (in Hertz). Note that the baud rate does not go into effect until the Transmit Control Register (TCR) is programmed with the prescale value. Hence, this function returns the prescale tcrPrescaleValue parameter for later programming in the TCR. The higher level peripheral driver should alert the user of an out of range baud rate input.
Note that the LPSPI module must first be disabled before configuring this. Note that the LPSPI module must be configured for master mode before configuring this.

Parameters:

base – LPSPI peripheral address. 
baudRate_Bps – The desired baud rate in bits per second. 
srcClock_Hz – Module source input clock in Hertz. 
tcrPrescaleValue – The TCR prescale value needed to program the TCR. 


Returns:
The actual calculated baud rate. This function may also return a “0” if the LPSPI is not configured for master mode or if the LPSPI module is not disabled. 






void LPSPI_MasterSetDelayScaler(LPSPI_Type *base, uint32_t scaler, lpspi_delay_type_t whichDelay)

Manually configures a specific LPSPI delay parameter (module must be disabled to change the delay values). 
This function configures the following: SCK to PCS delay, or PCS to SCK delay, or The configurations must occur between the transfer delay.
The delay names are available in type lpspi_delay_type_t.
The user passes the desired delay along with the delay value. This allows the user to directly set the delay values if they have pre-calculated them or if they simply wish to manually increment the value.
Note that the LPSPI module must first be disabled before configuring this. Note that the LPSPI module must be configured for master mode before configuring this.

Parameters:

base – LPSPI peripheral address. 
scaler – The 8-bit delay value 0x00 to 0xFF (255). 
whichDelay – The desired delay to configure, must be of type lpspi_delay_type_t. 







uint32_t LPSPI_MasterSetDelayTimes(LPSPI_Type *base, uint32_t delayTimeInNanoSec, lpspi_delay_type_t whichDelay, uint32_t srcClock_Hz)

Calculates the delay based on the desired delay input in nanoseconds (module must be disabled to change the delay values). 
This function calculates the values for the following: SCK to PCS delay, or PCS to SCK delay, or The configurations must occur between the transfer delay.
The delay names are available in type lpspi_delay_type_t.
The user passes the desired delay and the desired delay value in nano-seconds. The function calculates the value needed for the desired delay parameter and returns the actual calculated delay because an exact delay match may not be possible. In this case, the closest match is calculated without going below the desired delay value input. It is possible to input a very large delay value that exceeds the capability of the part, in which case the maximum supported delay is returned. It is up to the higher level peripheral driver to alert the user of an out of range delay input.
Note that the LPSPI module must be configured for master mode before configuring this. And note that the delayTime = LPSPI_clockSource / (PRESCALE * Delay_scaler).

Parameters:

base – LPSPI peripheral address. 
delayTimeInNanoSec – The desired delay value in nano-seconds. 
whichDelay – The desired delay to configuration, which must be of type lpspi_delay_type_t. 
srcClock_Hz – Module source input clock in Hertz. 


Returns:
actual Calculated delay value in nano-seconds. 






static inline void LPSPI_WriteData(LPSPI_Type *base, uint32_t data)

Writes data into the transmit data buffer. 
This function writes data passed in by the user to the Transmit Data Register (TDR). The user can pass up to 32-bits of data to load into the TDR. If the frame size exceeds 32-bits, the user has to manage sending the data one 32-bit word at a time. Any writes to the TDR result in an immediate push to the transmit FIFO. This function can be used for either master or slave modes.

Parameters:

base – LPSPI peripheral address. 
data – The data word to be sent. 







static inline uint32_t LPSPI_ReadData(LPSPI_Type *base)

Reads data from the data buffer. 
This function reads the data from the Receive Data Register (RDR). This function can be used for either master or slave mode.

Parameters:

base – LPSPI peripheral address. 


Returns:
The data read from the data buffer. 






void LPSPI_SetDummyData(LPSPI_Type *base, uint8_t dummyData)

Set up the dummy data. 

Parameters:

base – LPSPI peripheral address. 
dummyData – Data to be transferred when tx buffer is NULL. Note: This API has no effect when LPSPI in slave interrupt mode, because driver will set the TXMSK bit to 1 if txData is NULL, no data is loaded from transmit FIFO and output pin is tristated. 







void LPSPI_MasterTransferCreateHandle(LPSPI_Type *base, lpspi_master_handle_t *handle, lpspi_master_transfer_callback_t callback, void *userData)

Initializes the LPSPI master handle. 
This function initializes the LPSPI handle, which can be used for other LPSPI transactional APIs. Usually, for a specified LPSPI instance, call this API once to get the initialized handle.

Parameters:

base – LPSPI peripheral address. 
handle – LPSPI handle pointer to lpspi_master_handle_t. 
callback – DSPI callback. 
userData – callback function parameter. 







status_t LPSPI_MasterTransferBlocking(LPSPI_Type *base, lpspi_transfer_t *transfer)

LPSPI master transfer data using a polling method. 
This function transfers data using a polling method. This is a blocking function, which does not return until all transfers have been completed.
Note: The transfer data size should be integer multiples of bytesPerFrame if bytesPerFrame is less than or equal to 4. For bytesPerFrame greater than 4: The transfer data size should be equal to bytesPerFrame if the bytesPerFrame is not integer multiples of 4. Otherwise, the transfer data size can be an integer multiple of bytesPerFrame.

Parameters:

base – LPSPI peripheral address. 
transfer – pointer to lpspi_transfer_t structure. 


Returns:
status of status_t. 






status_t LPSPI_MasterTransferNonBlocking(LPSPI_Type *base, lpspi_master_handle_t *handle, lpspi_transfer_t *transfer)

LPSPI master transfer data using an interrupt method. 
This function transfers data using an interrupt method. This is a non-blocking function, which returns right away. When all data is transferred, the callback function is called.
Note: The transfer data size should be integer multiples of bytesPerFrame if bytesPerFrame is less than or equal to 4. For bytesPerFrame greater than 4: The transfer data size should be equal to bytesPerFrame if the bytesPerFrame is not integer multiples of 4. Otherwise, the transfer data size can be an integer multiple of bytesPerFrame.

Parameters:

base – LPSPI peripheral address. 
handle – pointer to lpspi_master_handle_t structure which stores the transfer state. 
transfer – pointer to lpspi_transfer_t structure. 


Returns:
status of status_t. 






status_t LPSPI_MasterTransferGetCount(LPSPI_Type *base, lpspi_master_handle_t *handle, size_t *count)

Gets the master transfer remaining bytes. 
This function gets the master transfer remaining bytes.

Parameters:

base – LPSPI peripheral address. 
handle – pointer to lpspi_master_handle_t structure which stores the transfer state. 
count – Number of bytes transferred so far by the non-blocking transaction. 


Returns:
status of status_t. 






void LPSPI_MasterTransferAbort(LPSPI_Type *base, lpspi_master_handle_t *handle)

LPSPI master abort transfer which uses an interrupt method. 
This function aborts a transfer which uses an interrupt method.

Parameters:

base – LPSPI peripheral address. 
handle – pointer to lpspi_master_handle_t structure which stores the transfer state. 







void LPSPI_MasterTransferHandleIRQ(LPSPI_Type *base, lpspi_master_handle_t *handle)

LPSPI Master IRQ handler function. 
This function processes the LPSPI transmit and receive IRQ.

Parameters:

base – LPSPI peripheral address. 
handle – pointer to lpspi_master_handle_t structure which stores the transfer state. 







void LPSPI_SlaveTransferCreateHandle(LPSPI_Type *base, lpspi_slave_handle_t *handle, lpspi_slave_transfer_callback_t callback, void *userData)

Initializes the LPSPI slave handle. 
This function initializes the LPSPI handle, which can be used for other LPSPI transactional APIs. Usually, for a specified LPSPI instance, call this API once to get the initialized handle.

Parameters:

base – LPSPI peripheral address. 
handle – LPSPI handle pointer to lpspi_slave_handle_t. 
callback – DSPI callback. 
userData – callback function parameter. 







status_t LPSPI_SlaveTransferNonBlocking(LPSPI_Type *base, lpspi_slave_handle_t *handle, lpspi_transfer_t *transfer)

LPSPI slave transfer data using an interrupt method. 
This function transfer data using an interrupt method. This is a non-blocking function, which returns right away. When all data is transferred, the callback function is called.
Note: The transfer data size should be integer multiples of bytesPerFrame if bytesPerFrame is less than or equal to 4. For bytesPerFrame greater than 4: The transfer data size should be equal to bytesPerFrame if the bytesPerFrame is not an integer multiple of 4. Otherwise, the transfer data size can be an integer multiple of bytesPerFrame.

Parameters:

base – LPSPI peripheral address. 
handle – pointer to lpspi_slave_handle_t structure which stores the transfer state. 
transfer – pointer to lpspi_transfer_t structure. 


Returns:
status of status_t. 






status_t LPSPI_SlaveTransferGetCount(LPSPI_Type *base, lpspi_slave_handle_t *handle, size_t *count)

Gets the slave transfer remaining bytes. 
This function gets the slave transfer remaining bytes.

Parameters:

base – LPSPI peripheral address. 
handle – pointer to lpspi_slave_handle_t structure which stores the transfer state. 
count – Number of bytes transferred so far by the non-blocking transaction. 


Returns:
status of status_t. 






void LPSPI_SlaveTransferAbort(LPSPI_Type *base, lpspi_slave_handle_t *handle)

LPSPI slave aborts a transfer which uses an interrupt method. 
This function aborts a transfer which uses an interrupt method.

Parameters:

base – LPSPI peripheral address. 
handle – pointer to lpspi_slave_handle_t structure which stores the transfer state. 







void LPSPI_SlaveTransferHandleIRQ(LPSPI_Type *base, lpspi_slave_handle_t *handle)

LPSPI Slave IRQ handler function. 
This function processes the LPSPI transmit and receives an IRQ.

Parameters:

base – LPSPI peripheral address. 
handle – pointer to lpspi_slave_handle_t structure which stores the transfer state. 







bool LPSPI_WaitTxFifoEmpty(LPSPI_Type *base)

Wait for tx FIFO to be empty. 
This function wait the tx fifo empty

Parameters:

base – LPSPI peripheral address. 


Returns:
true for the tx FIFO is ready, false is not. 






void LPSPI_DriverIRQHandler(uint32_t instance)

LPSPI driver IRQ handler common entry. 
This function provides the common IRQ request entry for LPSPI.

Parameters:

instance – LPSPI instance. 







FSL_LPSPI_DRIVER_VERSION

LPSPI driver version. 





Status for the LPSPI driver. 
Values:


enumerator kStatus_LPSPI_Busy

LPSPI transfer is busy. 




enumerator kStatus_LPSPI_Error

LPSPI driver error. 




enumerator kStatus_LPSPI_Idle

LPSPI is idle. 




enumerator kStatus_LPSPI_OutOfRange

LPSPI transfer out Of range. 




enumerator kStatus_LPSPI_Timeout

LPSPI timeout polling status flags. 






enum _lpspi_flags

LPSPI status flags in SPIx_SR register. 
Values:


enumerator kLPSPI_TxDataRequestFlag

Transmit data flag 




enumerator kLPSPI_RxDataReadyFlag

Receive data flag 




enumerator kLPSPI_WordCompleteFlag

Word Complete flag 




enumerator kLPSPI_FrameCompleteFlag

Frame Complete flag 




enumerator kLPSPI_TransferCompleteFlag

Transfer Complete flag 




enumerator kLPSPI_TransmitErrorFlag

Transmit Error flag (FIFO underrun) 




enumerator kLPSPI_ReceiveErrorFlag

Receive Error flag (FIFO overrun) 




enumerator kLPSPI_DataMatchFlag

Data Match flag 




enumerator kLPSPI_ModuleBusyFlag

Module Busy flag 




enumerator kLPSPI_AllStatusFlag

Used for clearing all w1c status flags 






enum _lpspi_interrupt_enable

LPSPI interrupt source. 
Values:


enumerator kLPSPI_TxInterruptEnable

Transmit data interrupt enable 




enumerator kLPSPI_RxInterruptEnable

Receive data interrupt enable 




enumerator kLPSPI_WordCompleteInterruptEnable

Word complete interrupt enable 




enumerator kLPSPI_FrameCompleteInterruptEnable

Frame complete interrupt enable 




enumerator kLPSPI_TransferCompleteInterruptEnable

Transfer complete interrupt enable 




enumerator kLPSPI_TransmitErrorInterruptEnable

Transmit error interrupt enable(FIFO underrun) 




enumerator kLPSPI_ReceiveErrorInterruptEnable

Receive Error interrupt enable (FIFO overrun) 




enumerator kLPSPI_DataMatchInterruptEnable

Data Match interrupt enable 




enumerator kLPSPI_AllInterruptEnable

All above interrupts enable. 






enum _lpspi_dma_enable

LPSPI DMA source. 
Values:


enumerator kLPSPI_TxDmaEnable

Transmit data DMA enable 




enumerator kLPSPI_RxDmaEnable

Receive data DMA enable 






enum _lpspi_master_slave_mode

LPSPI master or slave mode configuration. 
Values:


enumerator kLPSPI_Master

LPSPI peripheral operates in master mode. 




enumerator kLPSPI_Slave

LPSPI peripheral operates in slave mode. 






enum _lpspi_which_pcs_config

LPSPI Peripheral Chip Select (PCS) configuration (which PCS to configure). 
Values:


enumerator kLPSPI_Pcs0

PCS[0] 




enumerator kLPSPI_Pcs1

PCS[1] 




enumerator kLPSPI_Pcs2

PCS[2] 




enumerator kLPSPI_Pcs3

PCS[3] 






enum _lpspi_pcs_polarity_config

LPSPI Peripheral Chip Select (PCS) Polarity configuration. 
Values:


enumerator kLPSPI_PcsActiveHigh

PCS Active High (idles low) 




enumerator kLPSPI_PcsActiveLow

PCS Active Low (idles high) 






enum _lpspi_pcs_polarity

LPSPI Peripheral Chip Select (PCS) Polarity. 
Values:


enumerator kLPSPI_Pcs0ActiveLow

Pcs0 Active Low (idles high). 




enumerator kLPSPI_Pcs1ActiveLow

Pcs1 Active Low (idles high). 




enumerator kLPSPI_Pcs2ActiveLow

Pcs2 Active Low (idles high). 




enumerator kLPSPI_Pcs3ActiveLow

Pcs3 Active Low (idles high). 




enumerator kLPSPI_PcsAllActiveLow

Pcs0 to Pcs5 Active Low (idles high). 






enum _lpspi_clock_polarity

LPSPI clock polarity configuration. 
Values:


enumerator kLPSPI_ClockPolarityActiveHigh

CPOL=0. Active-high LPSPI clock (idles low) 




enumerator kLPSPI_ClockPolarityActiveLow

CPOL=1. Active-low LPSPI clock (idles high) 






enum _lpspi_clock_phase

LPSPI clock phase configuration. 
Values:


enumerator kLPSPI_ClockPhaseFirstEdge

CPHA=0. Data is captured on the leading edge of the SCK and changed on the following edge. 




enumerator kLPSPI_ClockPhaseSecondEdge

CPHA=1. Data is changed on the leading edge of the SCK and captured on the following edge. 






enum _lpspi_shift_direction

LPSPI data shifter direction options. 
Values:


enumerator kLPSPI_MsbFirst

Data transfers start with most significant bit. 




enumerator kLPSPI_LsbFirst

Data transfers start with least significant bit. 






enum _lpspi_host_request_select

LPSPI Host Request select configuration. 
Values:


enumerator kLPSPI_HostReqExtPin

Host Request is an ext pin. 




enumerator kLPSPI_HostReqInternalTrigger

Host Request is an internal trigger. 






enum _lpspi_match_config

LPSPI Match configuration options. 
Values:


enumerator kLPSI_MatchDisabled

LPSPI Match Disabled. 




enumerator kLPSI_1stWordEqualsM0orM1

LPSPI Match Enabled. 




enumerator kLPSI_AnyWordEqualsM0orM1

LPSPI Match Enabled. 




enumerator kLPSI_1stWordEqualsM0and2ndWordEqualsM1

LPSPI Match Enabled. 




enumerator kLPSI_AnyWordEqualsM0andNxtWordEqualsM1

LPSPI Match Enabled. 




enumerator kLPSI_1stWordAndM1EqualsM0andM1

LPSPI Match Enabled. 




enumerator kLPSI_AnyWordAndM1EqualsM0andM1

LPSPI Match Enabled. 






enum _lpspi_pin_config

LPSPI pin (SDO and SDI) configuration. 
Values:


enumerator kLPSPI_SdiInSdoOut

LPSPI SDI input, SDO output. 




enumerator kLPSPI_SdiInSdiOut

LPSPI SDI input, SDI output. 




enumerator kLPSPI_SdoInSdoOut

LPSPI SDO input, SDO output. 




enumerator kLPSPI_SdoInSdiOut

LPSPI SDO input, SDI output. 






enum _lpspi_data_out_config

LPSPI data output configuration. 
Values:


enumerator kLpspiDataOutRetained

Data out retains last value when chip select is de-asserted 




enumerator kLpspiDataOutTristate

Data out is tristated when chip select is de-asserted 






enum _lpspi_transfer_width

LPSPI transfer width configuration. 
Values:


enumerator kLPSPI_SingleBitXfer

1-bit shift at a time, data out on SDO, in on SDI (normal mode) 




enumerator kLPSPI_TwoBitXfer

2-bits shift out on SDO/SDI and in on SDO/SDI 




enumerator kLPSPI_FourBitXfer

4-bits shift out on SDO/SDI/PCS[3:2] and in on SDO/SDI/PCS[3:2] 






enum _lpspi_delay_type

LPSPI delay type selection. 
Values:


enumerator kLPSPI_PcsToSck

PCS-to-SCK delay. 




enumerator kLPSPI_LastSckToPcs

Last SCK edge to PCS delay. 




enumerator kLPSPI_BetweenTransfer

Delay between transfers. 






enum _lpspi_transfer_config_flag_for_master

Use this enumeration for LPSPI master transfer configFlags. 
Values:


enumerator kLPSPI_MasterPcs0

LPSPI master PCS shift macro , internal used. LPSPI master transfer use PCS0 signal 




enumerator kLPSPI_MasterPcs1

LPSPI master PCS shift macro , internal used. LPSPI master transfer use PCS1 signal 




enumerator kLPSPI_MasterPcs2

LPSPI master PCS shift macro , internal used. LPSPI master transfer use PCS2 signal 




enumerator kLPSPI_MasterPcs3

LPSPI master PCS shift macro , internal used. LPSPI master transfer use PCS3 signal 




enumerator kLPSPI_MasterPcsContinuous

Is PCS signal continuous 




enumerator kLPSPI_MasterByteSwap

Is master swap the byte. For example, when want to send data 1 2 3 4 5 6 7 8 (suppose you set lpspi_shift_direction_t to MSB).

If you set bitPerFrame = 8 , no matter the kLPSPI_MasterByteSwapyou flag is used or not, the waveform is 1 2 3 4 5 6 7 8.
If you set bitPerFrame = 16 : (1) the waveform is 2 1 4 3 6 5 8 7 if you do not use the kLPSPI_MasterByteSwap flag. (2) the waveform is 1 2 3 4 5 6 7 8 if you use the kLPSPI_MasterByteSwap flag.
If you set bitPerFrame = 32 : (1) the waveform is 4 3 2 1 8 7 6 5 if you do not use the kLPSPI_MasterByteSwap flag. (2) the waveform is 1 2 3 4 5 6 7 8 if you use the kLPSPI_MasterByteSwap flag. 








enum _lpspi_transfer_config_flag_for_slave

Use this enumeration for LPSPI slave transfer configFlags. 
Values:


enumerator kLPSPI_SlavePcs0

LPSPI slave PCS shift macro , internal used. LPSPI slave transfer use PCS0 signal 




enumerator kLPSPI_SlavePcs1

LPSPI slave PCS shift macro , internal used. LPSPI slave transfer use PCS1 signal 




enumerator kLPSPI_SlavePcs2

LPSPI slave PCS shift macro , internal used. LPSPI slave transfer use PCS2 signal 




enumerator kLPSPI_SlavePcs3

LPSPI slave PCS shift macro , internal used. LPSPI slave transfer use PCS3 signal 




enumerator kLPSPI_SlaveByteSwap

Is slave swap the byte. For example, when want to send data 1 2 3 4 5 6 7 8 (suppose you set lpspi_shift_direction_t to MSB).

If you set bitPerFrame = 8 , no matter the kLPSPI_SlaveByteSwap flag is used or not, the waveform is 1 2 3 4 5 6 7 8.
If you set bitPerFrame = 16 : (1) the waveform is 2 1 4 3 6 5 8 7 if you do not use the kLPSPI_SlaveByteSwap flag. (2) the waveform is 1 2 3 4 5 6 7 8 if you use the kLPSPI_SlaveByteSwap flag.
If you set bitPerFrame = 32 : (1) the waveform is 4 3 2 1 8 7 6 5 if you do not use the kLPSPI_SlaveByteSwap flag. (2) the waveform is 1 2 3 4 5 6 7 8 if you use the kLPSPI_SlaveByteSwap flag. 








enum _lpspi_transfer_state

LPSPI transfer state, which is used for LPSPI transactional API state machine. 
Values:


enumerator kLPSPI_Idle

Nothing in the transmitter/receiver. 




enumerator kLPSPI_Busy

Transfer queue is not finished. 




enumerator kLPSPI_Error

Transfer error. 






typedef enum _lpspi_master_slave_mode lpspi_master_slave_mode_t

LPSPI master or slave mode configuration. 




typedef enum _lpspi_which_pcs_config lpspi_which_pcs_t

LPSPI Peripheral Chip Select (PCS) configuration (which PCS to configure). 




typedef enum _lpspi_pcs_polarity_config lpspi_pcs_polarity_config_t

LPSPI Peripheral Chip Select (PCS) Polarity configuration. 




typedef enum _lpspi_clock_polarity lpspi_clock_polarity_t

LPSPI clock polarity configuration. 




typedef enum _lpspi_clock_phase lpspi_clock_phase_t

LPSPI clock phase configuration. 




typedef enum _lpspi_shift_direction lpspi_shift_direction_t

LPSPI data shifter direction options. 




typedef enum _lpspi_host_request_select lpspi_host_request_select_t

LPSPI Host Request select configuration. 




typedef enum _lpspi_match_config lpspi_match_config_t

LPSPI Match configuration options. 




typedef enum _lpspi_pin_config lpspi_pin_config_t

LPSPI pin (SDO and SDI) configuration. 




typedef enum _lpspi_data_out_config lpspi_data_out_config_t

LPSPI data output configuration. 




typedef enum _lpspi_transfer_width lpspi_transfer_width_t

LPSPI transfer width configuration. 




typedef enum _lpspi_delay_type lpspi_delay_type_t

LPSPI delay type selection. 




typedef struct _lpspi_master_config lpspi_master_config_t

LPSPI master configuration structure. 




typedef struct _lpspi_slave_config lpspi_slave_config_t

LPSPI slave configuration structure. 




typedef struct _lpspi_master_handle lpspi_master_handle_t

Forward declaration of the _lpspi_master_handle typedefs. 




typedef struct _lpspi_slave_handle lpspi_slave_handle_t

Forward declaration of the _lpspi_slave_handle typedefs. 




typedef void (*lpspi_master_transfer_callback_t)(LPSPI_Type *base, lpspi_master_handle_t *handle, status_t status, void *userData)

Master completion callback function pointer type. 

Param base:
LPSPI peripheral address. 

Param handle:
Pointer to the handle for the LPSPI master. 

Param status:
Success or error code describing whether the transfer is completed. 

Param userData:
Arbitrary pointer-dataSized value passed from the application. 






typedef void (*lpspi_slave_transfer_callback_t)(LPSPI_Type *base, lpspi_slave_handle_t *handle, status_t status, void *userData)

Slave completion callback function pointer type. 

Param base:
LPSPI peripheral address. 

Param handle:
Pointer to the handle for the LPSPI slave. 

Param status:
Success or error code describing whether the transfer is completed. 

Param userData:
Arbitrary pointer-dataSized value passed from the application. 






typedef struct _lpspi_transfer lpspi_transfer_t

LPSPI master/slave transfer structure. 




volatile uint8_t g_lpspiDummyData[]

Global variable for dummy data value setting. 




LPSPI_DUMMY_DATA

LPSPI dummy data if no Tx data. 
Dummy data used for tx if there is not txData. 




SPI_RETRY_TIMES

Retry times for waiting flag. 




LPSPI_MASTER_PCS_SHIFT

LPSPI master PCS shift macro , internal used. 




LPSPI_MASTER_PCS_MASK

LPSPI master PCS shift macro , internal used. 




LPSPI_SLAVE_PCS_SHIFT

LPSPI slave PCS shift macro , internal used. 




LPSPI_SLAVE_PCS_MASK

LPSPI slave PCS shift macro , internal used. 




struct _lpspi_master_config


#include <fsl_lpspi.h>
LPSPI master configuration structure. 

Public Members


uint32_t baudRate

Baud Rate for LPSPI. 




uint32_t bitsPerFrame

Bits per frame, minimum 8, maximum 4096. 




lpspi_clock_polarity_t cpol

Clock polarity. 




lpspi_clock_phase_t cpha

Clock phase. 




lpspi_shift_direction_t direction

MSB or LSB data shift direction. 




uint32_t pcsToSckDelayInNanoSec

PCS to SCK delay time in nanoseconds, setting to 0 sets the minimum delay. It sets the boundary value if out of range. 




uint32_t lastSckToPcsDelayInNanoSec

Last SCK to PCS delay time in nanoseconds, setting to 0 sets the minimum delay. It sets the boundary value if out of range. 




uint32_t betweenTransferDelayInNanoSec

After the SCK delay time with nanoseconds, setting to 0 sets the minimum delay. It sets the boundary value if out of range. 




lpspi_which_pcs_t whichPcs

Desired Peripheral Chip Select (PCS). 




lpspi_pcs_polarity_config_t pcsActiveHighOrLow

Desired PCS active high or low 




lpspi_pin_config_t pinCfg

Configures which pins are used for input and output data during single bit transfers. 




lpspi_data_out_config_t dataOutConfig

Configures if the output data is tristated between accesses (LPSPI_PCS is negated). 




bool enableInputDelay

Enable master to sample the input data on a delayed SCK. This can help improve slave setup time. Refer to device data sheet for specific time length. 







struct _lpspi_slave_config


#include <fsl_lpspi.h>
LPSPI slave configuration structure. 

Public Members


uint32_t bitsPerFrame

Bits per frame, minimum 8, maximum 4096. 




lpspi_clock_polarity_t cpol

Clock polarity. 




lpspi_clock_phase_t cpha

Clock phase. 




lpspi_shift_direction_t direction

MSB or LSB data shift direction. 




lpspi_which_pcs_t whichPcs

Desired Peripheral Chip Select (pcs) 




lpspi_pcs_polarity_config_t pcsActiveHighOrLow

Desired PCS active high or low 




lpspi_pin_config_t pinCfg

Configures which pins are used for input and output data during single bit transfers. 




lpspi_data_out_config_t dataOutConfig

Configures if the output data is tristated between accesses (LPSPI_PCS is negated). 







struct _lpspi_transfer


#include <fsl_lpspi.h>
LPSPI master/slave transfer structure. 

Public Members


const uint8_t *txData

Send buffer. 




uint8_t *rxData

Receive buffer. 




volatile size_t dataSize

Transfer bytes. 




uint32_t configFlags

Transfer transfer configuration flags. Set from _lpspi_transfer_config_flag_for_master if the transfer is used for master or _lpspi_transfer_config_flag_for_slave enumeration if the transfer is used for slave. 







struct _lpspi_master_handle


#include <fsl_lpspi.h>
LPSPI master transfer handle structure used for transactional API. 

Public Members


volatile bool isPcsContinuous

Is PCS continuous in transfer. 




volatile bool writeTcrInIsr

A flag that whether should write TCR in ISR. 




volatile bool isByteSwap

A flag that whether should byte swap. 




volatile bool isTxMask

A flag that whether TCR[TXMSK] is set. 




volatile uint16_t bytesPerFrame

Number of bytes in each frame 




volatile uint16_t frameSize

Backup of TCR[FRAMESZ] 




volatile uint8_t fifoSize

FIFO dataSize. 




volatile uint8_t rxWatermark

Rx watermark. 




volatile uint8_t bytesEachWrite

Bytes for each write TDR. 




volatile uint8_t bytesEachRead

Bytes for each read RDR. 




const uint8_t *volatile txData

Send buffer. 




uint8_t *volatile rxData

Receive buffer. 




volatile size_t txRemainingByteCount

Number of bytes remaining to send. 




volatile size_t rxRemainingByteCount

Number of bytes remaining to receive. 




volatile uint32_t writeRegRemainingTimes

Write TDR register remaining times. 




volatile uint32_t readRegRemainingTimes

Read RDR register remaining times. 




uint32_t totalByteCount

Number of transfer bytes 




uint32_t txBuffIfNull

Used if the txData is NULL. 




volatile uint8_t state

LPSPI transfer state , _lpspi_transfer_state. 




lpspi_master_transfer_callback_t callback

Completion callback. 




void *userData

Callback user data. 







struct _lpspi_slave_handle


#include <fsl_lpspi.h>
LPSPI slave transfer handle structure used for transactional API. 

Public Members


volatile bool isByteSwap

A flag that whether should byte swap. 




volatile uint8_t fifoSize

FIFO dataSize. 




volatile uint8_t rxWatermark

Rx watermark. 




volatile uint8_t bytesEachWrite

Bytes for each write TDR. 




volatile uint8_t bytesEachRead

Bytes for each read RDR. 




const uint8_t *volatile txData

Send buffer. 




uint8_t *volatile rxData

Receive buffer. 




volatile size_t txRemainingByteCount

Number of bytes remaining to send. 




volatile size_t rxRemainingByteCount

Number of bytes remaining to receive. 




volatile uint32_t writeRegRemainingTimes

Write TDR register remaining times. 




volatile uint32_t readRegRemainingTimes

Read RDR register remaining times. 




uint32_t totalByteCount

Number of transfer bytes 




volatile uint8_t state

LPSPI transfer state , _lpspi_transfer_state. 




volatile uint32_t errorCount

Error count for slave transfer. 




lpspi_slave_transfer_callback_t callback

Completion callback. 




void *userData

Callback user data. 







LPSPI eDMA Driver#


FSL_LPSPI_EDMA_DRIVER_VERSION

LPSPI EDMA driver version. 




DMA_MAX_TRANSFER_COUNT

DMA max transfer size. 




typedef struct _lpspi_master_edma_handle lpspi_master_edma_handle_t

Forward declaration of the _lpspi_master_edma_handle typedefs. 




typedef struct _lpspi_slave_edma_handle lpspi_slave_edma_handle_t

Forward declaration of the _lpspi_slave_edma_handle typedefs. 




typedef void (*lpspi_master_edma_transfer_callback_t)(LPSPI_Type *base, lpspi_master_edma_handle_t *handle, status_t status, void *userData)

Completion callback function pointer type. 

Param base:
LPSPI peripheral base address. 

Param handle:
Pointer to the handle for the LPSPI master. 

Param status:
Success or error code describing whether the transfer completed. 

Param userData:
Arbitrary pointer-dataSized value passed from the application. 






typedef void (*lpspi_slave_edma_transfer_callback_t)(LPSPI_Type *base, lpspi_slave_edma_handle_t *handle, status_t status, void *userData)

Completion callback function pointer type. 

Param base:
LPSPI peripheral base address. 

Param handle:
Pointer to the handle for the LPSPI slave. 

Param status:
Success or error code describing whether the transfer completed. 

Param userData:
Arbitrary pointer-dataSized value passed from the application. 






void LPSPI_MasterTransferCreateHandleEDMA(LPSPI_Type *base, lpspi_master_edma_handle_t *handle, lpspi_master_edma_transfer_callback_t callback, void *userData, edma_handle_t *edmaRxRegToRxDataHandle, edma_handle_t *edmaTxDataToTxRegHandle)

Initializes the LPSPI master eDMA handle. 
This function initializes the LPSPI eDMA handle which can be used for other LPSPI transactional APIs. Usually, for a specified LPSPI instance, call this API once to get the initialized handle.
Note that the LPSPI eDMA has a separated (Rx and Tx as two sources) or shared (Rx and Tx are the same source) DMA request source. (1) For a separated DMA request source, enable and set the Rx DMAMUX source for edmaRxRegToRxDataHandle and Tx DMAMUX source for edmaTxDataToTxRegHandle. (2) For a shared DMA request source, enable and set the Rx/Tx DMAMUX source for edmaRxRegToRxDataHandle.

Parameters:

base – LPSPI peripheral base address. 
handle – LPSPI handle pointer to lpspi_master_edma_handle_t. 
callback – LPSPI callback. 
userData – callback function parameter. 
edmaRxRegToRxDataHandle – edmaRxRegToRxDataHandle pointer to edma_handle_t. 
edmaTxDataToTxRegHandle – edmaTxDataToTxRegHandle pointer to edma_handle_t. 







status_t LPSPI_MasterTransferEDMA(LPSPI_Type *base, lpspi_master_edma_handle_t *handle, lpspi_transfer_t *transfer)

LPSPI master transfer data using eDMA. 
This function transfers data using eDMA. This is a non-blocking function, which returns right away. When all data is transferred, the callback function is called.
Note: The transfer data size should be an integer multiple of bytesPerFrame if bytesPerFrame is less than or equal to 4. For bytesPerFrame greater than 4: The transfer data size should be equal to bytesPerFrame if the bytesPerFrame is not an integer multiple of 4. Otherwise, the transfer data size can be an integer multiple of bytesPerFrame.

Parameters:

base – LPSPI peripheral base address. 
handle – pointer to lpspi_master_edma_handle_t structure which stores the transfer state. 
transfer – pointer to lpspi_transfer_t structure. 


Returns:
status of status_t. 






status_t LPSPI_MasterTransferPrepareEDMALite(LPSPI_Type *base, lpspi_master_edma_handle_t *handle, uint32_t configFlags)

LPSPI master config transfer parameter while using eDMA. 
This function is preparing to transfer data using eDMA, work with LPSPI_MasterTransferEDMALite.

Parameters:

base – LPSPI peripheral base address. 
handle – pointer to lpspi_master_edma_handle_t structure which stores the transfer state. 
configFlags – transfer configuration flags. _lpspi_transfer_config_flag_for_master. 


Return values:

kStatus_Success – Execution successfully. 
kStatus_LPSPI_Busy – The LPSPI device is busy. 


Returns:
Indicates whether LPSPI master transfer was successful or not. 






status_t LPSPI_MasterTransferEDMALite(LPSPI_Type *base, lpspi_master_edma_handle_t *handle, lpspi_transfer_t *transfer)

LPSPI master transfer data using eDMA without configs. 
This function transfers data using eDMA. This is a non-blocking function, which returns right away. When all data is transferred, the callback function is called.
Note: This API is only for transfer through DMA without configuration. Before calling this API, you must call LPSPI_MasterTransferPrepareEDMALite to configure it once. The transfer data size should be an integer multiple of bytesPerFrame if bytesPerFrame is less than or equal to 4. For bytesPerFrame greater than 4: The transfer data size should be equal to bytesPerFrame if the bytesPerFrame is not an integer multiple of 4. Otherwise, the transfer data size can be an integer multiple of bytesPerFrame.

Parameters:

base – LPSPI peripheral base address. 
handle – pointer to lpspi_master_edma_handle_t structure which stores the transfer state. 
transfer – pointer to lpspi_transfer_t structure, config field is not uesed. 


Return values:

kStatus_Success – Execution successfully. 
kStatus_LPSPI_Busy – The LPSPI device is busy. 
kStatus_InvalidArgument – The transfer structure is invalid. 


Returns:
Indicates whether LPSPI master transfer was successful or not. 






void LPSPI_MasterTransferAbortEDMA(LPSPI_Type *base, lpspi_master_edma_handle_t *handle)

LPSPI master aborts a transfer which is using eDMA. 
This function aborts a transfer which is using eDMA.

Parameters:

base – LPSPI peripheral base address. 
handle – pointer to lpspi_master_edma_handle_t structure which stores the transfer state. 







status_t LPSPI_MasterTransferGetCountEDMA(LPSPI_Type *base, lpspi_master_edma_handle_t *handle, size_t *count)

Gets the master eDMA transfer remaining bytes. 
This function gets the master eDMA transfer remaining bytes.

Parameters:

base – LPSPI peripheral base address. 
handle – pointer to lpspi_master_edma_handle_t structure which stores the transfer state. 
count – Number of bytes transferred so far by the EDMA transaction. 


Returns:
status of status_t. 






void LPSPI_SlaveTransferCreateHandleEDMA(LPSPI_Type *base, lpspi_slave_edma_handle_t *handle, lpspi_slave_edma_transfer_callback_t callback, void *userData, edma_handle_t *edmaRxRegToRxDataHandle, edma_handle_t *edmaTxDataToTxRegHandle)

Initializes the LPSPI slave eDMA handle. 
This function initializes the LPSPI eDMA handle which can be used for other LPSPI transactional APIs. Usually, for a specified LPSPI instance, call this API once to get the initialized handle.
Note that LPSPI eDMA has a separated (Rx and Tx as two sources) or shared (Rx and Tx as the same source) DMA request source.
(1) For a separated DMA request source, enable and set the Rx DMAMUX source for edmaRxRegToRxDataHandle and Tx DMAMUX source for edmaTxDataToTxRegHandle. (2) For a shared DMA request source, enable and set the Rx/Rx DMAMUX source for edmaRxRegToRxDataHandle .

Parameters:

base – LPSPI peripheral base address. 
handle – LPSPI handle pointer to lpspi_slave_edma_handle_t. 
callback – LPSPI callback. 
userData – callback function parameter. 
edmaRxRegToRxDataHandle – edmaRxRegToRxDataHandle pointer to edma_handle_t. 
edmaTxDataToTxRegHandle – edmaTxDataToTxRegHandle pointer to edma_handle_t. 







status_t LPSPI_SlaveTransferEDMA(LPSPI_Type *base, lpspi_slave_edma_handle_t *handle, lpspi_transfer_t *transfer)

LPSPI slave transfers data using eDMA. 
This function transfers data using eDMA. This is a non-blocking function, which return right away. When all data is transferred, the callback function is called.
Note: The transfer data size should be an integer multiple of bytesPerFrame if bytesPerFrame is less than or equal to 4. For bytesPerFrame greater than 4: The transfer data size should be equal to bytesPerFrame if the bytesPerFrame is not an integer multiple of 4. Otherwise, the transfer data size can be an integer multiple of bytesPerFrame.

Parameters:

base – LPSPI peripheral base address. 
handle – pointer to lpspi_slave_edma_handle_t structure which stores the transfer state. 
transfer – pointer to lpspi_transfer_t structure. 


Returns:
status of status_t. 






void LPSPI_SlaveTransferAbortEDMA(LPSPI_Type *base, lpspi_slave_edma_handle_t *handle)

LPSPI slave aborts a transfer which is using eDMA. 
This function aborts a transfer which is using eDMA.

Parameters:

base – LPSPI peripheral base address. 
handle – pointer to lpspi_slave_edma_handle_t structure which stores the transfer state. 







status_t LPSPI_SlaveTransferGetCountEDMA(LPSPI_Type *base, lpspi_slave_edma_handle_t *handle, size_t *count)

Gets the slave eDMA transfer remaining bytes. 
This function gets the slave eDMA transfer remaining bytes.

Parameters:

base – LPSPI peripheral base address. 
handle – pointer to lpspi_slave_edma_handle_t structure which stores the transfer state. 
count – Number of bytes transferred so far by the eDMA transaction. 


Returns:
status of status_t. 






struct _lpspi_master_edma_handle


#include <fsl_lpspi_edma.h>
LPSPI master eDMA transfer handle structure used for transactional API. 

Public Members


volatile bool isPcsContinuous

Is PCS continuous in transfer. 




volatile bool isByteSwap

A flag that whether should byte swap. 




volatile uint8_t fifoSize

FIFO dataSize. 




volatile uint8_t rxWatermark

Rx watermark. 




volatile uint8_t bytesEachWrite

Bytes for each write TDR. 




volatile uint8_t bytesEachRead

Bytes for each read RDR. 




volatile uint8_t bytesLastRead

Bytes for last read RDR. 




volatile bool isThereExtraRxBytes

Is there extra RX byte. 




const uint8_t *volatile txData

Send buffer. 




uint8_t *volatile rxData

Receive buffer. 




volatile size_t txRemainingByteCount

Number of bytes remaining to send. 




volatile size_t rxRemainingByteCount

Number of bytes remaining to receive. 




volatile uint32_t writeRegRemainingTimes

Write TDR register remaining times. 




volatile uint32_t readRegRemainingTimes

Read RDR register remaining times. 




uint32_t totalByteCount

Number of transfer bytes 




edma_tcd_t *lastTimeTCD

Pointer to the lastTime TCD 




bool isMultiDMATransmit

Is there multi DMA transmit 




volatile uint8_t dmaTransmitTime

DMA Transfer times. 




uint32_t lastTimeDataBytes

DMA transmit last Time data Bytes 




uint32_t dataBytesEveryTime

Bytes in a time for DMA transfer, default is DMA_MAX_TRANSFER_COUNT 




edma_transfer_config_t transferConfigRx

Config of DMA rx channel. 




edma_transfer_config_t transferConfigTx

Config of DMA tx channel. 




uint32_t txBuffIfNull

Used if there is not txData for DMA purpose. 




uint32_t rxBuffIfNull

Used if there is not rxData for DMA purpose. 




uint32_t transmitCommand

Used to write TCR for DMA purpose. 




volatile uint8_t state

LPSPI transfer state , _lpspi_transfer_state. 




uint8_t nbytes

eDMA minor byte transfer count initially configured. 




lpspi_master_edma_transfer_callback_t callback

Completion callback. 




void *userData

Callback user data. 




edma_handle_t *edmaRxRegToRxDataHandle

edma_handle_t handle point used for RxReg to RxData buff 




edma_handle_t *edmaTxDataToTxRegHandle

edma_handle_t handle point used for TxData to TxReg buff 




edma_tcd_t lpspiSoftwareTCD[3]

SoftwareTCD, internal used 







struct _lpspi_slave_edma_handle


#include <fsl_lpspi_edma.h>
LPSPI slave eDMA transfer handle structure used for transactional API. 

Public Members


volatile bool isByteSwap

A flag that whether should byte swap. 




volatile uint8_t fifoSize

FIFO dataSize. 




volatile uint8_t rxWatermark

Rx watermark. 




volatile uint8_t bytesEachWrite

Bytes for each write TDR. 




volatile uint8_t bytesEachRead

Bytes for each read RDR. 




volatile uint8_t bytesLastRead

Bytes for last read RDR. 




volatile bool isThereExtraRxBytes

Is there extra RX byte. 




uint8_t nbytes

eDMA minor byte transfer count initially configured. 




const uint8_t *volatile txData

Send buffer. 




uint8_t *volatile rxData

Receive buffer. 




volatile size_t txRemainingByteCount

Number of bytes remaining to send. 




volatile size_t rxRemainingByteCount

Number of bytes remaining to receive. 




volatile uint32_t writeRegRemainingTimes

Write TDR register remaining times. 




volatile uint32_t readRegRemainingTimes

Read RDR register remaining times. 




uint32_t totalByteCount

Number of transfer bytes 




uint32_t txBuffIfNull

Used if there is not txData for DMA purpose. 




uint32_t rxBuffIfNull

Used if there is not rxData for DMA purpose. 




volatile uint8_t state

LPSPI transfer state. 




uint32_t errorCount

Error count for slave transfer. 




lpspi_slave_edma_transfer_callback_t callback

Completion callback. 




void *userData

Callback user data. 




edma_handle_t *edmaRxRegToRxDataHandle

edma_handle_t handle point used for RxReg to RxData buff 




edma_handle_t *edmaTxDataToTxRegHandle

edma_handle_t handle point used for TxData to TxReg 




edma_tcd_t lpspiSoftwareTCD[2]

SoftwareTCD, internal used 







LPTMR: Low-Power Timer#


void LPTMR_Init(LPTMR_Type *base, const lptmr_config_t *config)

Ungates the LPTMR clock and configures the peripheral for a basic operation. 

Note
This API should be called at the beginning of the application using the LPTMR driver.


Parameters:

base – LPTMR peripheral base address 
config – A pointer to the LPTMR configuration structure. 







void LPTMR_Deinit(LPTMR_Type *base)

Gates the LPTMR clock. 

Parameters:

base – LPTMR peripheral base address 







void LPTMR_GetDefaultConfig(lptmr_config_t *config)

Fills in the LPTMR configuration structure with default settings. 
The default values are as follows. 
config->timerMode = kLPTMR_TimerModeTimeCounter;
config->pinSelect = kLPTMR_PinSelectInput_0;
config->pinPolarity = kLPTMR_PinPolarityActiveHigh;
config->enableFreeRunning = false;
config->bypassPrescaler = true;
config->prescalerClockSource = kLPTMR_PrescalerClock_1;
config->value = kLPTMR_Prescale_Glitch_0;


 

Parameters:

config – A pointer to the LPTMR configuration structure. 







static inline void LPTMR_EnableInterrupts(LPTMR_Type *base, uint32_t mask)

Enables the selected LPTMR interrupts. 

Parameters:

base – LPTMR peripheral base address 
mask – The interrupts to enable. This is a logical OR of members of the enumeration lptmr_interrupt_enable_t







static inline void LPTMR_DisableInterrupts(LPTMR_Type *base, uint32_t mask)

Disables the selected LPTMR interrupts. 

Parameters:

base – LPTMR peripheral base address 
mask – The interrupts to disable. This is a logical OR of members of the enumeration lptmr_interrupt_enable_t. 







static inline uint32_t LPTMR_GetEnabledInterrupts(LPTMR_Type *base)

Gets the enabled LPTMR interrupts. 

Parameters:

base – LPTMR peripheral base address


Returns:
The enabled interrupts. This is the logical OR of members of the enumeration lptmr_interrupt_enable_t






static inline uint32_t LPTMR_GetStatusFlags(LPTMR_Type *base)

Gets the LPTMR status flags. 

Parameters:

base – LPTMR peripheral base address


Returns:
The status flags. This is the logical OR of members of the enumeration lptmr_status_flags_t






static inline void LPTMR_ClearStatusFlags(LPTMR_Type *base, uint32_t mask)

Clears the LPTMR status flags. 

Parameters:

base – LPTMR peripheral base address 
mask – The status flags to clear. This is a logical OR of members of the enumeration lptmr_status_flags_t. 







static inline void LPTMR_SetTimerPeriod(LPTMR_Type *base, uint32_t ticks)

Sets the timer period in units of count. 
Timers counts from 0 until it equals the count value set here. The count value is written to the CMR register.

Note

The TCF flag is set with the CNR equals the count provided here and then increments.
Call the utility macros provided in the fsl_common.h to convert to ticks.




Parameters:

base – LPTMR peripheral base address 
ticks – A timer period in units of ticks 







static inline uint32_t LPTMR_GetCurrentTimerCount(LPTMR_Type *base)

Reads the current timer counting value. 
This function returns the real-time timer counting value in a range from 0 to a timer period.

Note
Call the utility macros provided in the fsl_common.h to convert ticks to usec or msec.


Parameters:

base – LPTMR peripheral base address


Returns:
The current counter value in ticks 






static inline void LPTMR_StartTimer(LPTMR_Type *base)

Starts the timer. 
After calling this function, the timer counts up to the CMR register value. Each time the timer reaches the CMR value and then increments, it generates a trigger pulse and sets the timeout interrupt flag. An interrupt is also triggered if the timer interrupt is enabled.

Parameters:

base – LPTMR peripheral base address 







static inline void LPTMR_StopTimer(LPTMR_Type *base)

Stops the timer. 
This function stops the timer and resets the timer’s counter register.

Parameters:

base – LPTMR peripheral base address 







FSL_LPTMR_DRIVER_VERSION

Driver Version 




enum _lptmr_pin_select

LPTMR pin selection used in pulse counter mode. 
Values:


enumerator kLPTMR_PinSelectInput_0

Pulse counter input 0 is selected 




enumerator kLPTMR_PinSelectInput_1

Pulse counter input 1 is selected 




enumerator kLPTMR_PinSelectInput_2

Pulse counter input 2 is selected 




enumerator kLPTMR_PinSelectInput_3

Pulse counter input 3 is selected 






enum _lptmr_pin_polarity

LPTMR pin polarity used in pulse counter mode. 
Values:


enumerator kLPTMR_PinPolarityActiveHigh

Pulse Counter input source is active-high 




enumerator kLPTMR_PinPolarityActiveLow

Pulse Counter input source is active-low 






enum _lptmr_timer_mode

LPTMR timer mode selection. 
Values:


enumerator kLPTMR_TimerModeTimeCounter

Time Counter mode 




enumerator kLPTMR_TimerModePulseCounter

Pulse Counter mode 






enum _lptmr_prescaler_glitch_value

LPTMR prescaler/glitch filter values. 
Values:


enumerator kLPTMR_Prescale_Glitch_0

Prescaler divide 2, glitch filter does not support this setting 




enumerator kLPTMR_Prescale_Glitch_1

Prescaler divide 4, glitch filter 2 




enumerator kLPTMR_Prescale_Glitch_2

Prescaler divide 8, glitch filter 4 




enumerator kLPTMR_Prescale_Glitch_3

Prescaler divide 16, glitch filter 8 




enumerator kLPTMR_Prescale_Glitch_4

Prescaler divide 32, glitch filter 16 




enumerator kLPTMR_Prescale_Glitch_5

Prescaler divide 64, glitch filter 32 




enumerator kLPTMR_Prescale_Glitch_6

Prescaler divide 128, glitch filter 64 




enumerator kLPTMR_Prescale_Glitch_7

Prescaler divide 256, glitch filter 128 




enumerator kLPTMR_Prescale_Glitch_8

Prescaler divide 512, glitch filter 256 




enumerator kLPTMR_Prescale_Glitch_9

Prescaler divide 1024, glitch filter 512 




enumerator kLPTMR_Prescale_Glitch_10

Prescaler divide 2048 glitch filter 1024 




enumerator kLPTMR_Prescale_Glitch_11

Prescaler divide 4096, glitch filter 2048 




enumerator kLPTMR_Prescale_Glitch_12

Prescaler divide 8192, glitch filter 4096 




enumerator kLPTMR_Prescale_Glitch_13

Prescaler divide 16384, glitch filter 8192 




enumerator kLPTMR_Prescale_Glitch_14

Prescaler divide 32768, glitch filter 16384 




enumerator kLPTMR_Prescale_Glitch_15

Prescaler divide 65536, glitch filter 32768 






enum _lptmr_prescaler_clock_select

LPTMR prescaler/glitch filter clock select. 

Note
Clock connections are SoC-specific 

Values:




enum _lptmr_interrupt_enable

List of the LPTMR interrupts. 
Values:


enumerator kLPTMR_TimerInterruptEnable

Timer interrupt enable 






enum _lptmr_status_flags

List of the LPTMR status flags. 
Values:


enumerator kLPTMR_TimerCompareFlag

Timer compare flag 






typedef enum _lptmr_pin_select lptmr_pin_select_t

LPTMR pin selection used in pulse counter mode. 




typedef enum _lptmr_pin_polarity lptmr_pin_polarity_t

LPTMR pin polarity used in pulse counter mode. 




typedef enum _lptmr_timer_mode lptmr_timer_mode_t

LPTMR timer mode selection. 




typedef enum _lptmr_prescaler_glitch_value lptmr_prescaler_glitch_value_t

LPTMR prescaler/glitch filter values. 




typedef enum _lptmr_prescaler_clock_select lptmr_prescaler_clock_select_t

LPTMR prescaler/glitch filter clock select. 

Note
Clock connections are SoC-specific 





typedef enum _lptmr_interrupt_enable lptmr_interrupt_enable_t

List of the LPTMR interrupts. 




typedef enum _lptmr_status_flags lptmr_status_flags_t

List of the LPTMR status flags. 




typedef struct _lptmr_config lptmr_config_t

LPTMR config structure. 
This structure holds the configuration settings for the LPTMR peripheral. To initialize this structure to reasonable defaults, call the LPTMR_GetDefaultConfig() function and pass a pointer to your configuration structure instance.
The configuration struct can be made constant so it resides in flash. 




static inline void LPTMR_EnableTimerDMA(LPTMR_Type *base, bool enable)

Enable or disable timer DMA request. 

Parameters:

base – base LPTMR peripheral base address 
enable – Switcher of timer DMA feature. “true” means to enable, “false” means to disable. 







struct _lptmr_config


#include <fsl_lptmr.h>
LPTMR config structure. 
This structure holds the configuration settings for the LPTMR peripheral. To initialize this structure to reasonable defaults, call the LPTMR_GetDefaultConfig() function and pass a pointer to your configuration structure instance.
The configuration struct can be made constant so it resides in flash. 

Public Members


lptmr_timer_mode_t timerMode

Time counter mode or pulse counter mode 




lptmr_pin_select_t pinSelect

LPTMR pulse input pin select; used only in pulse counter mode 




lptmr_pin_polarity_t pinPolarity

LPTMR pulse input pin polarity; used only in pulse counter mode 




bool enableFreeRunning

True: enable free running, counter is reset on overflow False: counter is reset when the compare flag is set 




bool bypassPrescaler

True: bypass prescaler; false: use clock from prescaler 




lptmr_prescaler_clock_select_t prescalerClockSource

LPTMR clock source 




lptmr_prescaler_glitch_value_t value

Prescaler or glitch filter value 







LPUART:  Low Power Universal Asynchronous Receiver/Transmitter Driver#


LPUART Driver#


static inline void LPUART_SoftwareReset(LPUART_Type *base)

Resets the LPUART using software. 
This function resets all internal logic and registers except the Global Register. Remains set until cleared by software.

Parameters:

base – LPUART peripheral base address. 







status_t LPUART_Init(LPUART_Type *base, const lpuart_config_t *config, uint32_t srcClock_Hz)

Initializes an LPUART instance with the user configuration structure and the peripheral clock. 
This function configures the LPUART module with user-defined settings. Call the LPUART_GetDefaultConfig() function to configure the configuration structure and get the default configuration. The example below shows how to use this API to configure the LPUART. 
lpuart_config_t lpuartConfig;
lpuartConfig.baudRate_Bps = 115200U;
lpuartConfig.parityMode = kLPUART_ParityDisabled;
lpuartConfig.dataBitsCount = kLPUART_EightDataBits;
lpuartConfig.isMsb = false;
lpuartConfig.stopBitCount = kLPUART_OneStopBit;
lpuartConfig.txFifoWatermark = 0;
lpuartConfig.rxFifoWatermark = 1;
LPUART_Init(LPUART1, &lpuartConfig, 20000000U);




Parameters:

base – LPUART peripheral base address. 
config – Pointer to a user-defined configuration structure. 
srcClock_Hz – LPUART clock source frequency in HZ. 


Return values:

kStatus_LPUART_BaudrateNotSupport – Baudrate is not support in current clock source. 
kStatus_Success – LPUART initialize succeed 







status_t LPUART_Deinit(LPUART_Type *base)

Deinitializes a LPUART instance. 
This function waits for transmit to complete, disables TX and RX, and disables the LPUART clock.

Parameters:

base – LPUART peripheral base address. 


Return values:

kStatus_Success – Deinit is success. 
kStatus_LPUART_Timeout – Timeout during deinit. 







void LPUART_GetDefaultConfig(lpuart_config_t *config)

Gets the default configuration structure. 
This function initializes the LPUART configuration structure to a default value. The default values are: lpuartConfig->baudRate_Bps = 115200U; lpuartConfig->parityMode = kLPUART_ParityDisabled; lpuartConfig->dataBitsCount = kLPUART_EightDataBits; lpuartConfig->isMsb = false; lpuartConfig->stopBitCount = kLPUART_OneStopBit; lpuartConfig->txFifoWatermark = 0; lpuartConfig->rxFifoWatermark = 1; lpuartConfig->rxIdleType = kLPUART_IdleTypeStartBit; lpuartConfig->rxIdleConfig = kLPUART_IdleCharacter1; lpuartConfig->enableTx = false; lpuartConfig->enableRx = false;

Parameters:

config – Pointer to a configuration structure. 







status_t LPUART_SetBaudRate(LPUART_Type *base, uint32_t baudRate_Bps, uint32_t srcClock_Hz)

Sets the LPUART instance baudrate. 
This function configures the LPUART module baudrate. This function is used to update the LPUART module baudrate after the LPUART module is initialized by the LPUART_Init. 
LPUART_SetBaudRate(LPUART1, 115200U, 20000000U);




Parameters:

base – LPUART peripheral base address. 
baudRate_Bps – LPUART baudrate to be set. 
srcClock_Hz – LPUART clock source frequency in HZ. 


Return values:

kStatus_LPUART_BaudrateNotSupport – Baudrate is not supported in the current clock source. 
kStatus_Success – Set baudrate succeeded. 







void LPUART_Enable9bitMode(LPUART_Type *base, bool enable)

Enable 9-bit data mode for LPUART. 
This function set the 9-bit mode for LPUART module. The 9th bit is not used for parity thus can be modified by user.

Parameters:

base – LPUART peripheral base address. 
enable – true to enable, flase to disable. 







static inline void LPUART_SetMatchAddress(LPUART_Type *base, uint16_t address1, uint16_t address2)

Set the LPUART address. 
This function configures the address for LPUART module that works as slave in 9-bit data mode. One or two address fields can be configured. When the address field’s match enable bit is set, the frame it receices with MSB being 1 is considered as an address frame, otherwise it is considered as data frame. Once the address frame matches one of slave’s own addresses, this slave is addressed. This address frame and its following data frames are stored in the receive buffer, otherwise the frames will be discarded. To un-address a slave, just send an address frame with unmatched address.

Note
Any LPUART instance joined in the multi-slave system can work as slave. The position of the address mark is the same as the parity bit when parity is enabled for 8 bit and 9 bit data formats.


Parameters:

base – LPUART peripheral base address. 
address1 – LPUART slave address1. 
address2 – LPUART slave address2. 







static inline void LPUART_EnableMatchAddress(LPUART_Type *base, bool match1, bool match2)

Enable the LPUART match address feature. 

Parameters:

base – LPUART peripheral base address. 
match1 – true to enable match address1, false to disable. 
match2 – true to enable match address2, false to disable. 







static inline void LPUART_SetRxFifoWatermark(LPUART_Type *base, uint8_t water)

Sets the rx FIFO watermark. 

Parameters:

base – LPUART peripheral base address. 
water – Rx FIFO watermark. 







static inline void LPUART_SetTxFifoWatermark(LPUART_Type *base, uint8_t water)

Sets the tx FIFO watermark. 

Parameters:

base – LPUART peripheral base address. 
water – Tx FIFO watermark. 







static inline void LPUART_TransferEnable16Bit(lpuart_handle_t *handle, bool enable)

Sets the LPUART using 16bit transmit, only for 9bit or 10bit mode. 
This function Enable 16bit Data transmit in lpuart_handle_t.

Parameters:

handle – LPUART handle pointer. 
enable – true to enable, false to disable. 







uint32_t LPUART_GetStatusFlags(LPUART_Type *base)

Gets LPUART status flags. 
This function gets all LPUART status flags. The flags are returned as the logical OR value of the enumerators _lpuart_flags. To check for a specific status, compare the return value with enumerators in the _lpuart_flags. For example, to check whether the TX is empty: 
if (kLPUART_TxDataRegEmptyFlag & LPUART_GetStatusFlags(LPUART1))
{
    ...
}




Parameters:

base – LPUART peripheral base address. 


Returns:
LPUART status flags which are ORed by the enumerators in the _lpuart_flags. 






status_t LPUART_ClearStatusFlags(LPUART_Type *base, uint32_t mask)

Clears status flags with a provided mask. 
This function clears LPUART status flags with a provided mask. Automatically cleared flags can’t be cleared by this function. Flags that can only cleared or set by hardware are: kLPUART_TxDataRegEmptyFlag, kLPUART_TransmissionCompleteFlag, kLPUART_RxDataRegFullFlag, kLPUART_RxActiveFlag, kLPUART_NoiseErrorFlag, kLPUART_ParityErrorFlag, kLPUART_TxFifoEmptyFlag,kLPUART_RxFifoEmptyFlag Note: This API should be called when the Tx/Rx is idle, otherwise it takes no effects.

Parameters:

base – LPUART peripheral base address. 
mask – the status flags to be cleared. The user can use the enumerators in the _lpuart_status_flag_t to do the OR operation and get the mask. 


Return values:

kStatus_LPUART_FlagCannotClearManually – The flag can’t be cleared by this function but it is cleared automatically by hardware. 
kStatus_Success – Status in the mask are cleared. 


Returns:
0 succeed, others failed. 






void LPUART_EnableInterrupts(LPUART_Type *base, uint32_t mask)

Enables LPUART interrupts according to a provided mask. 
This function enables the LPUART interrupts according to a provided mask. The mask is a logical OR of enumeration members. See the _lpuart_interrupt_enable. This examples shows how to enable TX empty interrupt and RX full interrupt: 
LPUART_EnableInterrupts(LPUART1,kLPUART_TxDataRegEmptyInterruptEnable | kLPUART_RxDataRegFullInterruptEnable);




Parameters:

base – LPUART peripheral base address. 
mask – The interrupts to enable. Logical OR of _lpuart_interrupt_enable. 







void LPUART_DisableInterrupts(LPUART_Type *base, uint32_t mask)

Disables LPUART interrupts according to a provided mask. 
This function disables the LPUART interrupts according to a provided mask. The mask is a logical OR of enumeration members. See _lpuart_interrupt_enable. This example shows how to disable the TX empty interrupt and RX full interrupt: 
LPUART_DisableInterrupts(LPUART1,kLPUART_TxDataRegEmptyInterruptEnable | kLPUART_RxDataRegFullInterruptEnable);




Parameters:

base – LPUART peripheral base address. 
mask – The interrupts to disable. Logical OR of _lpuart_interrupt_enable. 







uint32_t LPUART_GetEnabledInterrupts(LPUART_Type *base)

Gets enabled LPUART interrupts. 
This function gets the enabled LPUART interrupts. The enabled interrupts are returned as the logical OR value of the enumerators _lpuart_interrupt_enable. To check a specific interrupt enable status, compare the return value with enumerators in _lpuart_interrupt_enable. For example, to check whether the TX empty interrupt is enabled: 
uint32_t enabledInterrupts = LPUART_GetEnabledInterrupts(LPUART1);

if (kLPUART_TxDataRegEmptyInterruptEnable & enabledInterrupts)
{
    ...
}




Parameters:

base – LPUART peripheral base address. 


Returns:
LPUART interrupt flags which are logical OR of the enumerators in _lpuart_interrupt_enable. 






static inline uintptr_t LPUART_GetDataRegisterAddress(LPUART_Type *base)

Gets the LPUART data register address. 
This function returns the LPUART data register address, which is mainly used by the DMA/eDMA.

Parameters:

base – LPUART peripheral base address. 


Returns:
LPUART data register addresses which are used both by the transmitter and receiver. 






static inline void LPUART_EnableTxDMA(LPUART_Type *base, bool enable)

Enables or disables the LPUART transmitter DMA request. 
This function enables or disables the transmit data register empty flag, STAT[TDRE], to generate DMA requests.

Parameters:

base – LPUART peripheral base address. 
enable – True to enable, false to disable. 







static inline void LPUART_EnableRxDMA(LPUART_Type *base, bool enable)

Enables or disables the LPUART receiver DMA. 
This function enables or disables the receiver data register full flag, STAT[RDRF], to generate DMA requests.

Parameters:

base – LPUART peripheral base address. 
enable – True to enable, false to disable. 







uint32_t LPUART_GetInstance(LPUART_Type *base)

Get the LPUART instance from peripheral base address. 

Parameters:

base – LPUART peripheral base address. 


Returns:
LPUART instance. 






static inline void LPUART_EnableTx(LPUART_Type *base, bool enable)

Enables or disables the LPUART transmitter. 
This function enables or disables the LPUART transmitter.

Parameters:

base – LPUART peripheral base address. 
enable – True to enable, false to disable. 







static inline void LPUART_EnableRx(LPUART_Type *base, bool enable)

Enables or disables the LPUART receiver. 
This function enables or disables the LPUART receiver.

Parameters:

base – LPUART peripheral base address. 
enable – True to enable, false to disable. 







static inline void LPUART_WriteByte(LPUART_Type *base, uint8_t data)

Writes to the transmitter register. 
This function writes data to the transmitter register directly. The upper layer must ensure that the TX register is empty or that the TX FIFO has room before calling this function.

Parameters:

base – LPUART peripheral base address. 
data – Data write to the TX register. 







static inline uint8_t LPUART_ReadByte(LPUART_Type *base)

Reads the receiver register. 
This function reads data from the receiver register directly. The upper layer must ensure that the receiver register is full or that the RX FIFO has data before calling this function.

Parameters:

base – LPUART peripheral base address. 


Returns:
Data read from data register. 






static inline uint8_t LPUART_GetRxFifoCount(LPUART_Type *base)

Gets the rx FIFO data count. 

Parameters:

base – LPUART peripheral base address. 


Returns:
rx FIFO data count. 






static inline uint8_t LPUART_GetTxFifoCount(LPUART_Type *base)

Gets the tx FIFO data count. 

Parameters:

base – LPUART peripheral base address. 


Returns:
tx FIFO data count. 






void LPUART_SendAddress(LPUART_Type *base, uint8_t address)

Transmit an address frame in 9-bit data mode. 

Parameters:

base – LPUART peripheral base address. 
address – LPUART slave address. 







status_t LPUART_WriteBlocking(LPUART_Type *base, const uint8_t *data, size_t length)

Writes to the transmitter register using a blocking method. 
This function polls the transmitter register, first waits for the register to be empty or TX FIFO to have room, and writes data to the transmitter buffer, then waits for the dat to be sent out to the bus.

Parameters:

base – LPUART peripheral base address. 
data – Start address of the data to write. 
length – Size of the data to write. 


Return values:

kStatus_LPUART_Timeout – Transmission timed out and was aborted. 
kStatus_Success – Successfully wrote all data. 







status_t LPUART_WriteBlocking16bit(LPUART_Type *base, const uint16_t *data, size_t length)

Writes to the transmitter register using a blocking method in 9bit or 10bit mode. 

Note
This function only support 9bit or 10bit transfer. Please make sure only 10bit of data is valid and other bits are 0.


Parameters:

base – LPUART peripheral base address. 
data – Start address of the data to write. 
length – Size of the data to write. 


Return values:

kStatus_LPUART_Timeout – Transmission timed out and was aborted. 
kStatus_Success – Successfully wrote all data. 







status_t LPUART_ReadBlocking(LPUART_Type *base, uint8_t *data, size_t length)

Reads the receiver data register using a blocking method. 
This function polls the receiver register, waits for the receiver register full or receiver FIFO has data, and reads data from the TX register.

Parameters:

base – LPUART peripheral base address. 
data – Start address of the buffer to store the received data. 
length – Size of the buffer. 


Return values:

kStatus_LPUART_RxHardwareOverrun – Receiver overrun happened while receiving data. 
kStatus_LPUART_NoiseError – Noise error happened while receiving data. 
kStatus_LPUART_FramingError – Framing error happened while receiving data. 
kStatus_LPUART_ParityError – Parity error happened while receiving data. 
kStatus_LPUART_Timeout – Transmission timed out and was aborted. 
kStatus_Success – Successfully received all data. 







status_t LPUART_ReadBlocking16bit(LPUART_Type *base, uint16_t *data, size_t length)

Reads the receiver data register in 9bit or 10bit mode. 

Note
This function only support 9bit or 10bit transfer.


Parameters:

base – LPUART peripheral base address. 
data – Start address of the buffer to store the received data by 16bit, only 10bit is valid. 
length – Size of the buffer. 


Return values:

kStatus_LPUART_RxHardwareOverrun – Receiver overrun happened while receiving data. 
kStatus_LPUART_NoiseError – Noise error happened while receiving data. 
kStatus_LPUART_FramingError – Framing error happened while receiving data. 
kStatus_LPUART_ParityError – Parity error happened while receiving data. 
kStatus_LPUART_Timeout – Transmission timed out and was aborted. 
kStatus_Success – Successfully received all data. 







void LPUART_TransferCreateHandle(LPUART_Type *base, lpuart_handle_t *handle, lpuart_transfer_callback_t callback, void *userData)

Initializes the LPUART handle. 
This function initializes the LPUART handle, which can be used for other LPUART transactional APIs. Usually, for a specified LPUART instance, call this API once to get the initialized handle.
The LPUART driver supports the “background” receiving, which means that user can set up an RX ring buffer optionally. Data received is stored into the ring buffer even when the user doesn’t call the LPUART_TransferReceiveNonBlocking() API. If there is already data received in the ring buffer, the user can get the received data from the ring buffer directly. The ring buffer is disabled if passing NULL as ringBuffer.

Parameters:

base – LPUART peripheral base address. 
handle – LPUART handle pointer. 
callback – Callback function. 
userData – User data. 







status_t LPUART_TransferSendNonBlocking(LPUART_Type *base, lpuart_handle_t *handle, lpuart_transfer_t *xfer)

Transmits a buffer of data using the interrupt method. 
This function send data using an interrupt method. This is a non-blocking function, which returns directly without waiting for all data written to the transmitter register. When all data is written to the TX register in the ISR, the LPUART driver calls the callback function and passes the kStatus_LPUART_TxIdle as status parameter.

Note
The kStatus_LPUART_TxIdle is passed to the upper layer when all data are written to the TX register. However, there is no check to ensure that all the data sent out. Before disabling the TX, check the kLPUART_TransmissionCompleteFlag to ensure that the transmit is finished.


Parameters:

base – LPUART peripheral base address. 
handle – LPUART handle pointer. 
xfer – LPUART transfer structure, see lpuart_transfer_t. 


Return values:

kStatus_Success – Successfully start the data transmission. 
kStatus_LPUART_TxBusy – Previous transmission still not finished, data not all written to the TX register. 
kStatus_InvalidArgument – Invalid argument. 







void LPUART_TransferStartRingBuffer(LPUART_Type *base, lpuart_handle_t *handle, uint8_t *ringBuffer, size_t ringBufferSize)

Sets up the RX ring buffer. 
This function sets up the RX ring buffer to a specific UART handle.
When the RX ring buffer is used, data received is stored into the ring buffer even when the user doesn’t call the UART_TransferReceiveNonBlocking() API. If there is already data received in the ring buffer, the user can get the received data from the ring buffer directly.

Note
When using RX ring buffer, one byte is reserved for internal use. In other words, if ringBufferSize is 32, then only 31 bytes are used for saving data.


Parameters:

base – LPUART peripheral base address. 
handle – LPUART handle pointer. 
ringBuffer – Start address of ring buffer for background receiving. Pass NULL to disable the ring buffer. 
ringBufferSize – size of the ring buffer. 







void LPUART_TransferStopRingBuffer(LPUART_Type *base, lpuart_handle_t *handle)

Aborts the background transfer and uninstalls the ring buffer. 
This function aborts the background transfer and uninstalls the ring buffer.

Parameters:

base – LPUART peripheral base address. 
handle – LPUART handle pointer. 







size_t LPUART_TransferGetRxRingBufferLength(LPUART_Type *base, lpuart_handle_t *handle)

Get the length of received data in RX ring buffer. 

Parameters:

base – LPUART peripheral base address. 
handle – LPUART handle pointer. 


Returns:
Length of received data in RX ring buffer. 






void LPUART_TransferAbortSend(LPUART_Type *base, lpuart_handle_t *handle)

Aborts the interrupt-driven data transmit. 
This function aborts the interrupt driven data sending. The user can get the remainBtyes to find out how many bytes are not sent out.

Parameters:

base – LPUART peripheral base address. 
handle – LPUART handle pointer. 







status_t LPUART_TransferGetSendCount(LPUART_Type *base, lpuart_handle_t *handle, uint32_t *count)

Gets the number of bytes that have been sent out to bus. 
This function gets the number of bytes that have been sent out to bus by an interrupt method.

Parameters:

base – LPUART peripheral base address. 
handle – LPUART handle pointer. 
count – Send bytes count. 


Return values:

kStatus_NoTransferInProgress – No send in progress. 
kStatus_InvalidArgument – Parameter is invalid. 
kStatus_Success – Get successfully through the parameter count; 







status_t LPUART_TransferReceiveNonBlocking(LPUART_Type *base, lpuart_handle_t *handle, lpuart_transfer_t *xfer, size_t *receivedBytes)

Receives a buffer of data using the interrupt method. 
This function receives data using an interrupt method. This is a non-blocking function which returns without waiting to ensure that all data are received. If the RX ring buffer is used and not empty, the data in the ring buffer is copied and the parameter receivedBytes shows how many bytes are copied from the ring buffer. After copying, if the data in the ring buffer is not enough for read, the receive request is saved by the LPUART driver. When the new data arrives, the receive request is serviced first. When all data is received, the LPUART driver notifies the upper layer through a callback function and passes a status parameter kStatus_UART_RxIdle. For example, the upper layer needs 10 bytes but there are only 5 bytes in ring buffer. The 5 bytes are copied to xfer->data, which returns with the parameter receivedBytes set to 5. For the remaining 5 bytes, the newly arrived data is saved from xfer->data[5]. When 5 bytes are received, the LPUART driver notifies the upper layer. If the RX ring buffer is not enabled, this function enables the RX and RX interrupt to receive data to xfer->data. When all data is received, the upper layer is notified.

Parameters:

base – LPUART peripheral base address. 
handle – LPUART handle pointer. 
xfer – LPUART transfer structure, see uart_transfer_t. 
receivedBytes – Bytes received from the ring buffer directly. 


Return values:

kStatus_Success – Successfully queue the transfer into the transmit queue. 
kStatus_LPUART_RxBusy – Previous receive request is not finished. 
kStatus_InvalidArgument – Invalid argument. 







void LPUART_TransferAbortReceive(LPUART_Type *base, lpuart_handle_t *handle)

Aborts the interrupt-driven data receiving. 
This function aborts the interrupt-driven data receiving. The user can get the remainBytes to find out how many bytes not received yet.

Parameters:

base – LPUART peripheral base address. 
handle – LPUART handle pointer. 







status_t LPUART_TransferGetReceiveCount(LPUART_Type *base, lpuart_handle_t *handle, uint32_t *count)

Gets the number of bytes that have been received. 
This function gets the number of bytes that have been received.

Parameters:

base – LPUART peripheral base address. 
handle – LPUART handle pointer. 
count – Receive bytes count. 


Return values:

kStatus_NoTransferInProgress – No receive in progress. 
kStatus_InvalidArgument – Parameter is invalid. 
kStatus_Success – Get successfully through the parameter count; 







void LPUART_TransferHandleIRQ(LPUART_Type *base, void *irqHandle)

LPUART IRQ handle function. 
This function handles the LPUART transmit and receive IRQ request.

Parameters:

base – LPUART peripheral base address. 
irqHandle – LPUART handle pointer. 







void LPUART_TransferHandleErrorIRQ(LPUART_Type *base, void *irqHandle)

LPUART Error IRQ handle function. 
This function handles the LPUART error IRQ request.

Parameters:

base – LPUART peripheral base address. 
irqHandle – LPUART handle pointer. 







void LPUART_DriverIRQHandler(uint32_t instance)

LPUART driver IRQ handler common entry. 
This function provides the common IRQ request entry for LPUART.

Parameters:

instance – LPUART instance. 







FSL_LPUART_DRIVER_VERSION

LPUART driver version. 





Error codes for the LPUART driver. 
Values:


enumerator kStatus_LPUART_TxBusy

TX busy 




enumerator kStatus_LPUART_RxBusy

RX busy 




enumerator kStatus_LPUART_TxIdle

LPUART transmitter is idle. 




enumerator kStatus_LPUART_RxIdle

LPUART receiver is idle. 




enumerator kStatus_LPUART_TxWatermarkTooLarge

TX FIFO watermark too large 




enumerator kStatus_LPUART_RxWatermarkTooLarge

RX FIFO watermark too large 




enumerator kStatus_LPUART_FlagCannotClearManually

Some flag can’t manually clear 




enumerator kStatus_LPUART_Error

Error happens on LPUART. 




enumerator kStatus_LPUART_RxRingBufferOverrun

LPUART RX software ring buffer overrun. 




enumerator kStatus_LPUART_RxHardwareOverrun

LPUART RX receiver overrun. 




enumerator kStatus_LPUART_NoiseError

LPUART noise error. 




enumerator kStatus_LPUART_FramingError

LPUART framing error. 




enumerator kStatus_LPUART_ParityError

LPUART parity error. 




enumerator kStatus_LPUART_BaudrateNotSupport

Baudrate is not support in current clock source 




enumerator kStatus_LPUART_IdleLineDetected

IDLE flag. 




enumerator kStatus_LPUART_Timeout

LPUART times out. 






enum _lpuart_parity_mode

LPUART parity mode. 
Values:


enumerator kLPUART_ParityDisabled

Parity disabled 




enumerator kLPUART_ParityEven

Parity enabled, type even, bit setting: PE|PT = 10 




enumerator kLPUART_ParityOdd

Parity enabled, type odd, bit setting: PE|PT = 11 






enum _lpuart_data_bits

LPUART data bits count. 
Values:


enumerator kLPUART_EightDataBits

Eight data bit 




enumerator kLPUART_SevenDataBits

Seven data bit 






enum _lpuart_stop_bit_count

LPUART stop bit count. 
Values:


enumerator kLPUART_OneStopBit

One stop bit 




enumerator kLPUART_TwoStopBit

Two stop bits 






enum _lpuart_transmit_cts_source

LPUART transmit CTS source. 
Values:


enumerator kLPUART_CtsSourcePin

CTS resource is the LPUART_CTS pin. 




enumerator kLPUART_CtsSourceMatchResult

CTS resource is the match result. 






enum _lpuart_transmit_cts_config

LPUART transmit CTS configure. 
Values:


enumerator kLPUART_CtsSampleAtStart

CTS input is sampled at the start of each character. 




enumerator kLPUART_CtsSampleAtIdle

CTS input is sampled when the transmitter is idle 






enum _lpuart_transmit_rts_polarity

LPUART transmitter RTS polarity. 
Values:


enumerator kLPUART_RtsPolarityLow

Transmitter RTS is active low. 




enumerator kLPUART_RtsPolarityHigh

Transmitter RTS is active high. 






enum _lpuart_idle_type_select

LPUART idle flag type defines when the receiver starts counting. 
Values:


enumerator kLPUART_IdleTypeStartBit

Start counting after a valid start bit. 




enumerator kLPUART_IdleTypeStopBit

Start counting after a stop bit. 






enum _lpuart_idle_config

LPUART idle detected configuration. This structure defines the number of idle characters that must be received before the IDLE flag is set. 
Values:


enumerator kLPUART_IdleCharacter1

the number of idle characters. 




enumerator kLPUART_IdleCharacter2

the number of idle characters. 




enumerator kLPUART_IdleCharacter4

the number of idle characters. 




enumerator kLPUART_IdleCharacter8

the number of idle characters. 




enumerator kLPUART_IdleCharacter16

the number of idle characters. 




enumerator kLPUART_IdleCharacter32

the number of idle characters. 




enumerator kLPUART_IdleCharacter64

the number of idle characters. 




enumerator kLPUART_IdleCharacter128

the number of idle characters. 






enum _lpuart_interrupt_enable

LPUART interrupt configuration structure, default settings all disabled. 
This structure contains the settings for all LPUART interrupt configurations. 
Values:


enumerator kLPUART_LinBreakInterruptEnable

LIN break detect. bit 7 




enumerator kLPUART_RxActiveEdgeInterruptEnable

Receive Active Edge. bit 6 




enumerator kLPUART_TxDataRegEmptyInterruptEnable

Transmit data register empty. bit 23 




enumerator kLPUART_TransmissionCompleteInterruptEnable

Transmission complete. bit 22 




enumerator kLPUART_RxDataRegFullInterruptEnable

Receiver data register full. bit 21 




enumerator kLPUART_IdleLineInterruptEnable

Idle line. bit 20 




enumerator kLPUART_RxOverrunInterruptEnable

Receiver Overrun. bit 27 




enumerator kLPUART_NoiseErrorInterruptEnable

Noise error flag. bit 26 




enumerator kLPUART_FramingErrorInterruptEnable

Framing error flag. bit 25 




enumerator kLPUART_ParityErrorInterruptEnable

Parity error flag. bit 24 




enumerator kLPUART_Match1InterruptEnable

Parity error flag. bit 15 




enumerator kLPUART_Match2InterruptEnable

Parity error flag. bit 14 




enumerator kLPUART_TxFifoOverflowInterruptEnable

Transmit FIFO Overflow. bit 9 




enumerator kLPUART_RxFifoUnderflowInterruptEnable

Receive FIFO Underflow. bit 8 




enumerator kLPUART_AllInterruptEnable







enum _lpuart_flags

LPUART status flags. 
This provides constants for the LPUART status flags for use in the LPUART functions. 
Values:


enumerator kLPUART_TxDataRegEmptyFlag

Transmit data register empty flag, sets when transmit buffer is empty. bit 23 




enumerator kLPUART_TransmissionCompleteFlag

Transmission complete flag, sets when transmission activity complete. bit 22 




enumerator kLPUART_RxDataRegFullFlag

Receive data register full flag, sets when the receive data buffer is full. bit 21 




enumerator kLPUART_IdleLineFlag

Idle line detect flag, sets when idle line detected. bit 20 




enumerator kLPUART_RxOverrunFlag

Receive Overrun, sets when new data is received before data is read from receive register. bit 19 




enumerator kLPUART_NoiseErrorFlag

Receive takes 3 samples of each received bit. If any of these samples differ, noise flag sets. bit 18 




enumerator kLPUART_FramingErrorFlag

Frame error flag, sets if logic 0 was detected where stop bit expected. bit 17 




enumerator kLPUART_ParityErrorFlag

If parity enabled, sets upon parity error detection. bit 16 




enumerator kLPUART_LinBreakFlag

LIN break detect interrupt flag, sets when LIN break char detected and LIN circuit enabled. bit 31 




enumerator kLPUART_RxActiveEdgeFlag

Receive pin active edge interrupt flag, sets when active edge detected. bit 30 




enumerator kLPUART_RxActiveFlag

Receiver Active Flag (RAF), sets at beginning of valid start. bit 24 




enumerator kLPUART_DataMatch1Flag

The next character to be read from LPUART_DATA matches MA1. bit 15 




enumerator kLPUART_DataMatch2Flag

The next character to be read from LPUART_DATA matches MA2. bit 14 




enumerator kLPUART_TxFifoEmptyFlag

TXEMPT bit, sets if transmit buffer is empty. bit 7 




enumerator kLPUART_RxFifoEmptyFlag

RXEMPT bit, sets if receive buffer is empty. bit 6 




enumerator kLPUART_TxFifoOverflowFlag

TXOF bit, sets if transmit buffer overflow occurred. bit 1 




enumerator kLPUART_RxFifoUnderflowFlag

RXUF bit, sets if receive buffer underflow occurred. bit 0 




enumerator kLPUART_AllClearFlags





enumerator kLPUART_AllFlags







typedef enum _lpuart_parity_mode lpuart_parity_mode_t

LPUART parity mode. 




typedef enum _lpuart_data_bits lpuart_data_bits_t

LPUART data bits count. 




typedef enum _lpuart_stop_bit_count lpuart_stop_bit_count_t

LPUART stop bit count. 




typedef enum _lpuart_transmit_cts_source lpuart_transmit_cts_source_t

LPUART transmit CTS source. 




typedef enum _lpuart_transmit_cts_config lpuart_transmit_cts_config_t

LPUART transmit CTS configure. 




typedef enum _lpuart_transmit_rts_polarity lpuart_transmit_rts_polarity_t

LPUART transmitter RTS polarity. 




typedef enum _lpuart_idle_type_select lpuart_idle_type_select_t

LPUART idle flag type defines when the receiver starts counting. 




typedef enum _lpuart_idle_config lpuart_idle_config_t

LPUART idle detected configuration. This structure defines the number of idle characters that must be received before the IDLE flag is set. 




typedef struct _lpuart_config lpuart_config_t

LPUART configuration structure. 




typedef struct _lpuart_transfer lpuart_transfer_t

LPUART transfer structure. 




typedef struct _lpuart_handle lpuart_handle_t





typedef void (*lpuart_transfer_callback_t)(LPUART_Type *base, lpuart_handle_t *handle, status_t status, void *userData)

LPUART transfer callback function. 




typedef void (*lpuart_isr_t)(LPUART_Type *base, void *handle)





void *s_lpuartHandle[]





const IRQn_Type s_lpuartTxIRQ[]





lpuart_isr_t s_lpuartIsr[]





UART_RETRY_TIMES

Retry times for waiting flag. 




struct _lpuart_config


#include <fsl_lpuart.h>
LPUART configuration structure. 

Public Members


uint32_t baudRate_Bps

LPUART baud rate 




lpuart_parity_mode_t parityMode

Parity mode, disabled (default), even, odd 




lpuart_data_bits_t dataBitsCount

Data bits count, eight (default), seven 




bool isMsb

Data bits order, LSB (default), MSB 




lpuart_stop_bit_count_t stopBitCount

Number of stop bits, 1 stop bit (default) or 2 stop bits 




uint8_t txFifoWatermark

TX FIFO watermark 




uint8_t rxFifoWatermark

RX FIFO watermark 




bool enableRxRTS

RX RTS enable 




bool enableTxRTS

TX RTS enable 




bool enableTxCTS

TX CTS enable 




lpuart_transmit_cts_source_t txCtsSource

TX CTS source 




lpuart_transmit_cts_config_t txCtsConfig

TX CTS configure 




lpuart_transmit_rts_polarity_t txRtsPolarity

TX RTS polarity 




uint8_t rtsWatermark

RTS watermark 




lpuart_idle_type_select_t rxIdleType

RX IDLE type. 




lpuart_idle_config_t rxIdleConfig

RX IDLE configuration. 




bool enableTx

Enable TX 




bool enableRx

Enable RX 




bool swapTxdRxd

Swap TXD and RXD pins 




bool inverseTxd

Transmit Data Inversion - Setting true reverses the polarity of the transmitted data output 







struct _lpuart_transfer


#include <fsl_lpuart.h>
LPUART transfer structure. 

Public Members


size_t dataSize

The byte count to be transfer. 







struct _lpuart_handle


#include <fsl_lpuart.h>
LPUART handle structure. 

Public Members


volatile size_t txDataSize

Size of the remaining data to send. 




size_t txDataSizeAll

Size of the data to send out. 




volatile size_t rxDataSize

Size of the remaining data to receive. 




size_t rxDataSizeAll

Size of the data to receive. 




size_t rxRingBufferSize

Size of the ring buffer. 




volatile uint16_t rxRingBufferHead

Index for the driver to store received data into ring buffer. 




volatile uint16_t rxRingBufferTail

Index for the user to get data from the ring buffer. 




lpuart_transfer_callback_t callback

Callback function. 




void *userData

LPUART callback function parameter. 




volatile uint8_t txState

TX transfer state. 




volatile uint8_t rxState

RX transfer state. 




bool isSevenDataBits

Seven data bits flag. 




bool is16bitData

16bit data bits flag, only used for 9bit or 10bit data 







union __unnamed61__


Public Members


uint8_t *data

The buffer of data to be transfer. 




uint8_t *rxData

The buffer to receive data. 




uint16_t *rxData16

The buffer to receive data. 




const uint8_t *txData

The buffer of data to be sent. 




const uint16_t *txData16

The buffer of data to be sent. 







union __unnamed63__


Public Members


const uint8_t *volatile txData

Address of remaining data to send. 




const uint16_t *volatile txData16

Address of remaining data to send. 







union __unnamed65__


Public Members


uint8_t *volatile rxData

Address of remaining data to receive. 




uint16_t *volatile rxData16

Address of remaining data to receive. 







union __unnamed67__


Public Members


uint8_t *rxRingBuffer

Start address of the receiver ring buffer. 




uint16_t *rxRingBuffer16

Start address of the receiver ring buffer. 







LPUART eDMA Driver#


void LPUART_TransferCreateHandleEDMA(LPUART_Type *base, lpuart_edma_handle_t *handle, lpuart_edma_transfer_callback_t callback, void *userData, edma_handle_t *txEdmaHandle, edma_handle_t *rxEdmaHandle)

Initializes the LPUART handle which is used in transactional functions. 

Note
This function disables all LPUART interrupts.


Parameters:

base – LPUART peripheral base address. 
handle – Pointer to lpuart_edma_handle_t structure. 
callback – Callback function. 
userData – User data. 
txEdmaHandle – User requested DMA handle for TX DMA transfer. 
rxEdmaHandle – User requested DMA handle for RX DMA transfer. 







status_t LPUART_SendEDMA(LPUART_Type *base, lpuart_edma_handle_t *handle, lpuart_transfer_t *xfer)

Sends data using eDMA. 
This function sends data using eDMA. This is a non-blocking function, which returns right away. When all data is sent, the send callback function is called.

Parameters:

base – LPUART peripheral base address. 
handle – LPUART handle pointer. 
xfer – LPUART eDMA transfer structure. See lpuart_transfer_t. 


Return values:

kStatus_Success – if succeed, others failed. 
kStatus_LPUART_TxBusy – Previous transfer on going. 
kStatus_InvalidArgument – Invalid argument. 







status_t LPUART_ReceiveEDMA(LPUART_Type *base, lpuart_edma_handle_t *handle, lpuart_transfer_t *xfer)

Receives data using eDMA. 
This function receives data using eDMA. This is non-blocking function, which returns right away. When all data is received, the receive callback function is called.

Parameters:

base – LPUART peripheral base address. 
handle – Pointer to lpuart_edma_handle_t structure. 
xfer – LPUART eDMA transfer structure, see lpuart_transfer_t. 


Return values:

kStatus_Success – if succeed, others fail. 
kStatus_LPUART_RxBusy – Previous transfer ongoing. 
kStatus_InvalidArgument – Invalid argument. 







void LPUART_TransferAbortSendEDMA(LPUART_Type *base, lpuart_edma_handle_t *handle)

Aborts the sent data using eDMA. 
This function aborts the sent data using eDMA.

Parameters:

base – LPUART peripheral base address. 
handle – Pointer to lpuart_edma_handle_t structure. 







void LPUART_TransferAbortReceiveEDMA(LPUART_Type *base, lpuart_edma_handle_t *handle)

Aborts the received data using eDMA. 
This function aborts the received data using eDMA.

Parameters:

base – LPUART peripheral base address. 
handle – Pointer to lpuart_edma_handle_t structure. 







status_t LPUART_TransferGetSendCountEDMA(LPUART_Type *base, lpuart_edma_handle_t *handle, uint32_t *count)

Gets the number of bytes written to the LPUART TX register. 
This function gets the number of bytes written to the LPUART TX register by DMA.

Parameters:

base – LPUART peripheral base address. 
handle – LPUART handle pointer. 
count – Send bytes count. 


Return values:

kStatus_NoTransferInProgress – No send in progress. 
kStatus_InvalidArgument – Parameter is invalid. 
kStatus_Success – Get successfully through the parameter count; 







status_t LPUART_TransferGetReceiveCountEDMA(LPUART_Type *base, lpuart_edma_handle_t *handle, uint32_t *count)

Gets the number of received bytes. 
This function gets the number of received bytes.

Parameters:

base – LPUART peripheral base address. 
handle – LPUART handle pointer. 
count – Receive bytes count. 


Return values:

kStatus_NoTransferInProgress – No receive in progress. 
kStatus_InvalidArgument – Parameter is invalid. 
kStatus_Success – Get successfully through the parameter count; 







void LPUART_TransferEdmaHandleIRQ(LPUART_Type *base, void *lpuartEdmaHandle)

LPUART eDMA IRQ handle function. 
This function handles the LPUART tx complete IRQ request and invoke user callback. It is not set to static so that it can be used in user application. 

Note
This function is used as default IRQ handler by double weak mechanism. If user’s specific IRQ handler is implemented, make sure this function is invoked in the handler.


Parameters:

base – LPUART peripheral base address. 
lpuartEdmaHandle – LPUART handle pointer. 







FSL_LPUART_EDMA_DRIVER_VERSION

LPUART EDMA driver version. 




typedef struct _lpuart_edma_handle lpuart_edma_handle_t





typedef void (*lpuart_edma_transfer_callback_t)(LPUART_Type *base, lpuart_edma_handle_t *handle, status_t status, void *userData)

LPUART transfer callback function. 




struct _lpuart_edma_handle


#include <fsl_lpuart_edma.h>
LPUART eDMA handle. 

Public Members


lpuart_edma_transfer_callback_t callback

Callback function. 




void *userData

LPUART callback function parameter. 




size_t rxDataSizeAll

Size of the data to receive. 




size_t txDataSizeAll

Size of the data to send out. 




edma_handle_t *txEdmaHandle

The eDMA TX channel used. 




edma_handle_t *rxEdmaHandle

The eDMA RX channel used. 




uint8_t nbytes

eDMA minor byte transfer count initially configured. 




volatile uint8_t txState

TX transfer state. 




volatile uint8_t rxState

RX transfer state 







Mcx_enet#



Defines the status return codes for transaction. 
Values:


enumerator kStatus_ENET_InitMemoryFail

Status code 4000. Init failed since buffer memory was not enough. 




enumerator kStatus_ENET_RxFrameError

Status code 4001. A frame received but data error occurred. 




enumerator kStatus_ENET_RxFrameFail

Status code 4002. Failed to receive a frame. 




enumerator kStatus_ENET_RxFrameEmpty

Status code 4003. No frame arrived. 




enumerator kStatus_ENET_RxFrameDrop

Status code 4004. Rx frame was dropped since there’s no buffer memory. 




enumerator kStatus_ENET_TxFrameBusy

Status code 4005. There were no resources for Tx operation. 




enumerator kStatus_ENET_TxFrameFail

Status code 4006. Transmit frame failed. 




enumerator kStatus_ENET_TxFrameOverLen

Status code 4007. Failed to send an oversize frame. 






enum _enet_mii_mode

Defines the MII/RMII mode for data interface between the MAC and the PHY. 
Values:


enumerator kENET_MiiMode

MII mode for data interface. 




enumerator kENET_RmiiMode

RMII mode for data interface. 






enum _enet_mii_speed

Defines the 10/100 Mbps speed for the MII data interface. 
Values:


enumerator kENET_MiiSpeed10M

Speed 10 Mbps. 




enumerator kENET_MiiSpeed100M

Speed 100 Mbps. 






enum _enet_mii_duplex

Defines the half or full duplex for the MII data interface. 
Values:


enumerator kENET_MiiHalfDuplex

Half duplex mode. 




enumerator kENET_MiiFullDuplex

Full duplex mode. 






enum _enet_dma_burstlen

Define the DMA maximum transmit burst length. 
Values:


enumerator kENET_BurstLen1

DMA burst length 1. 




enumerator kENET_BurstLen2

DMA burst length 2. 




enumerator kENET_BurstLen4

DMA burst length 4. 




enumerator kENET_BurstLen8

DMA burst length 8. 




enumerator kENET_BurstLen16

DMA burst length 16. 




enumerator kENET_BurstLen32

DMA burst length 32. 




enumerator kENET_BurstLen64

DMA burst length 64. eight times enabled. 




enumerator kENET_BurstLen128

DMA burst length 128. eight times enabled. 




enumerator kENET_BurstLen256

DMA burst length 256. eight times enabled. 






enum _enet_desc_flag

Define the flag for the descriptor. 
Values:


enumerator kENET_MiddleFlag

It’s a middle descriptor of the frame. 




enumerator kENET_LastFlagOnly

It’s the last descriptor of the frame. 




enumerator kENET_FirstFlagOnly

It’s the first descriptor of the frame. 




enumerator kENET_FirstLastFlag

It’s the first and last descriptor of the frame. 






enum _enet_systime_op

Define the system time adjust operation control. 
Values:


enumerator kENET_SystimeAdd

System time add to. 




enumerator kENET_SystimeSubtract

System time subtract. 






enum _enet_ts_rollover_type

Define the system time rollover control. 
Values:


enumerator kENET_BinaryRollover

System time binary rollover. 




enumerator kENET_DigitalRollover

System time digital rollover. 






enum _enet_special_config

Defines some special configuration for ENET. 
These control flags are provided for special user requirements. Normally, these is no need to set this control flags for ENET initialization. But if you have some special requirements, set the flags to specialControl in the enet_config_t. 

Note
“kENET_StoreAndForward” is recommended to be set when the ENET_PTP1588FEATURE_REQUIRED is defined or else the timestamp will be mess-up when the overflow happens. 

Values:


enumerator kENET_DescDoubleBuffer

The double buffer is used in the Tx/Rx descriptor. 




enumerator kENET_StoreAndForward

The Rx/Tx store and forward enable. 




enumerator kENET_PromiscuousEnable

The promiscuous enabled. 




enumerator kENET_FlowControlEnable

The flow control enabled. 




enumerator kENET_BroadCastRxDisable

The broadcast disabled. 




enumerator kENET_MulticastAllEnable

All multicast are passed. 




enumerator kENET_8023AS2KPacket

8023as support for 2K packets. 




enumerator kENET_RxChecksumOffloadEnable

The Rx checksum offload enabled. 






enum _enet_dma_interrupt_enable

List of DMA interrupts supported by the ENET interrupt. This enumeration uses one-hot encoding to allow a logical OR of multiple members. 
Values:


enumerator kENET_DmaTx

Tx interrupt. 




enumerator kENET_DmaTxStop

Tx stop interrupt. 




enumerator kENET_DmaTxBuffUnavail

Tx buffer unavailable. 




enumerator kENET_DmaRx

Rx interrupt. 




enumerator kENET_DmaRxBuffUnavail

Rx buffer unavailable. 




enumerator kENET_DmaRxStop

Rx stop. 




enumerator kENET_DmaRxWatchdogTimeout

Rx watchdog timeout. 




enumerator kENET_DmaEarlyTx

Early transmit. 




enumerator kENET_DmaEarlyRx

Early receive. 




enumerator kENET_DmaBusErr

Fatal bus error. 






enum _enet_mac_interrupt_enable

List of mac interrupts supported by the ENET interrupt. This enumeration uses one-hot encoding to allow a logical OR of multiple members. 
Values:


enumerator kENET_MacPmt





enumerator kENET_MacTimestamp







enum _enet_event

Defines the common interrupt event for callback use. 
Values:


enumerator kENET_RxIntEvent

Receive interrupt event. 




enumerator kENET_TxIntEvent

Transmit interrupt event. 




enumerator kENET_WakeUpIntEvent

Wake up interrupt event. 




enumerator kENET_TimeStampIntEvent

Time stamp interrupt event. 






enum _enet_dma_tx_sche

Define the DMA transmit arbitration for multi-queue. 
Values:


enumerator kENET_FixPri

Fixed priority. channel 0 has lower priority than channel 1. 




enumerator kENET_WeightStrPri

Weighted(burst length) strict priority. 




enumerator kENET_WeightRoundRobin

Weighted (weight factor) round robin. 






enum _enet_mtl_multiqueue_txsche

Define the MTL Tx scheduling algorithm for multiple queues/rings. 
Values:


enumerator kENET_txWeightRR

Tx weight round-robin. 




enumerator kENET_txStrPrio

Tx strict priority. 






enum _enet_mtl_multiqueue_rxsche

Define the MTL Rx scheduling algorithm for multiple queues/rings. 
Values:


enumerator kENET_rxStrPrio

Tx weight round-robin, Rx strict priority. 




enumerator kENET_rxWeightStrPrio

Tx strict priority, Rx weight strict priority. 






enum _enet_mtl_rxqueuemap

Define the MTL Rx queue and DMA channel mapping. 
Values:


enumerator kENET_StaticDirctMap

The received fame in Rx Qn(n = 0,1) direclty map to dma channel n. 




enumerator kENET_DynamicMap

The received frame in Rx Qn(n = 0,1) map to the dma channel m(m = 0,1) related with the same Mac. 






enum _enet_ptp_event_type

Defines the ENET PTP message related constant. 
Values:


enumerator kENET_PtpEventMsgType

PTP event message type. 




enumerator kENET_PtpSrcPortIdLen

PTP message sequence id length. 




enumerator kENET_PtpEventPort

PTP event port number. 




enumerator kENET_PtpGnrlPort

PTP general port number. 






enum _enet_tx_offload

Define the Tx checksum offload options. 
Values:


enumerator kENET_TxOffloadDisable

Disable Tx checksum offload. 




enumerator kENET_TxOffloadIPHeader

Enable IP header checksum calculation and insertion. 




enumerator kENET_TxOffloadIPHeaderPlusPayload

Enable IP header and payload checksum calculation and insertion. 




enumerator kENET_TxOffloadAll

Enable IP header, payload and pseudo header checksum calculation and insertion. 






enum _enet_vlan_tpid

Ethernet VLAN Tag protocol identifiers. 
Values:


enumerator kENET_StanCvlan

C-VLAN 0x8100. 




enumerator kENET_StanSvlan

S-VLAN 0x88A8. 






enum _enet_vlan_ops

Ethernet VLAN operations. 
Values:


enumerator kENET_NoOps

Not do anything. 




enumerator kENET_VlanRemove

Remove VLAN Tag. 




enumerator kENET_VlanInsert

Insert VLAN Tag. 




enumerator kENET_VlanReplace

Replace VLAN Tag. 






enum _enet_vlan_strip

Ethernet VLAN strip setting. 
Values:


enumerator kENET_VlanNotStrip

Not strip frame. 




enumerator kENET_VlanFilterPassStrip

Strip if VLAN filter passes. 




enumerator kENET_VlanFilterFailStrip

Strip if VLAN filter fails. 




enumerator kENET_VlanAlwaysStrip

Always strip. 






enum _enet_vlan_tx_channel

Ethernet VLAN Tx channels. 
Values:


enumerator kENET_VlanTagAllChannels

VLAN tag is inserted for every packets transmitted by the MAC. 




enumerator kENET_VlanTagChannel0

VLAN tag is inserted for the frames transmitted by channel 0. 




enumerator kENET_VlanTagChannel1

VLAN tag is inserted for the frames transmitted by channel 1. 






typedef enum _enet_mii_mode enet_mii_mode_t

Defines the MII/RMII mode for data interface between the MAC and the PHY. 




typedef enum _enet_mii_speed enet_mii_speed_t

Defines the 10/100 Mbps speed for the MII data interface. 




typedef enum _enet_mii_duplex enet_mii_duplex_t

Defines the half or full duplex for the MII data interface. 




typedef enum _enet_dma_burstlen enet_dma_burstlen_t

Define the DMA maximum transmit burst length. 




typedef enum _enet_desc_flag enet_desc_flag_t

Define the flag for the descriptor. 




typedef enum _enet_systime_op enet_systime_op_t

Define the system time adjust operation control. 




typedef enum _enet_ts_rollover_type enet_ts_rollover_type_t

Define the system time rollover control. 




typedef enum _enet_special_config enet_special_config_t

Defines some special configuration for ENET. 
These control flags are provided for special user requirements. Normally, these is no need to set this control flags for ENET initialization. But if you have some special requirements, set the flags to specialControl in the enet_config_t. 

Note
“kENET_StoreAndForward” is recommended to be set when the ENET_PTP1588FEATURE_REQUIRED is defined or else the timestamp will be mess-up when the overflow happens. 





typedef enum _enet_dma_interrupt_enable enet_dma_interrupt_enable_t

List of DMA interrupts supported by the ENET interrupt. This enumeration uses one-hot encoding to allow a logical OR of multiple members. 




typedef enum _enet_mac_interrupt_enable enet_mac_interrupt_enable_t

List of mac interrupts supported by the ENET interrupt. This enumeration uses one-hot encoding to allow a logical OR of multiple members. 




typedef enum _enet_event enet_event_t

Defines the common interrupt event for callback use. 




typedef enum _enet_dma_tx_sche enet_dma_tx_sche_t

Define the DMA transmit arbitration for multi-queue. 




typedef enum _enet_mtl_multiqueue_txsche enet_mtl_multiqueue_txsche_t

Define the MTL Tx scheduling algorithm for multiple queues/rings. 




typedef enum _enet_mtl_multiqueue_rxsche enet_mtl_multiqueue_rxsche_t

Define the MTL Rx scheduling algorithm for multiple queues/rings. 




typedef enum _enet_mtl_rxqueuemap enet_mtl_rxqueuemap_t

Define the MTL Rx queue and DMA channel mapping. 




typedef enum _enet_ptp_event_type enet_ptp_event_type_t

Defines the ENET PTP message related constant. 




typedef enum _enet_tx_offload enet_tx_offload_t

Define the Tx checksum offload options. 




typedef enum _enet_vlan_tpid enet_vlan_tpid_t

Ethernet VLAN Tag protocol identifiers. 




typedef enum _enet_vlan_ops enet_vlan_ops_t

Ethernet VLAN operations. 




typedef enum _enet_vlan_strip enet_vlan_strip_t

Ethernet VLAN strip setting. 




typedef enum _enet_vlan_tx_channel enet_vlan_tx_channel_t

Ethernet VLAN Tx channels. 




typedef struct _enet_rx_bd_struct enet_rx_bd_struct_t

Defines the receive descriptor structure It has the read-format and write-back format structures. They both have the same size with different region definition. So we define common name as the recive descriptor structure. When initialize the buffer descriptors, read-format region mask bits should be used. When Rx frame has been in the buffer descriptors, write-back format region store the Rx result information. 




typedef struct _enet_tx_bd_struct enet_tx_bd_struct_t

Defines the transmit descriptor structure It has the read-format and write-back format structure. They both has the same size with different region definition. So we define common name as the transmit descriptor structure. When initialize the buffer descriptors for Tx, read-format region mask bits should be used. When frame has been transmitted, write-back format region store the Tx result information. 




typedef struct _enet_tx_bd_config_struct enet_tx_bd_config_struct_t

Defines the Tx BD configuration structure. 




typedef struct _enet_ptp_time enet_ptp_time_t

Defines the ENET PTP time stamp structure. 




typedef struct enet_tx_reclaim_info enet_tx_reclaim_info_t

Defines the Tx reclaim information structure. 




typedef struct _enet_tx_dirty_ring enet_tx_dirty_ring_t

Defines the ENET transmit dirty addresses ring/queue structure. 




typedef struct _enet_buffer_config enet_buffer_config_t

Defines the buffer descriptor configure structure. 
Notes:

The receive and transmit descriptor start address pointer and tail pointer must be word-aligned.
The recommended minimum Tx/Rx ring length is 4.
The Tx/Rx descriptor tail address shall be the address pointer to the address just after the end of the last last descriptor. because only the descriptors between the start address and the tail address will be used by DMA.
The decriptor address is the start address of all used contiguous memory. for example, the rxDescStartAddrAlign is the start address of rxRingLen contiguous descriptor memorise for Rx descriptor ring 0.
The “*rxBufferstartAddr” is the first element of rxRingLen (2*rxRingLen for double buffers) Rx buffers. It means the *rxBufferStartAddr is the Rx buffer for the first descriptor the *rxBufferStartAddr + 1 is the Rx buffer for the second descriptor or the Rx buffer for the second buffer in the first descriptor. So please make sure the rxBufferStartAddr is the address of a rxRingLen or 2*rxRingLen array. 






typedef struct enet_multiqueue_config enet_multiqueue_config_t

Defines the configuration when multi-queue is used. 




typedef void *(*enet_rx_alloc_callback_t)(ENET_Type *base, void *userData, uint8_t channel)

Defines the Rx memory buffer alloc function pointer. 




typedef void (*enet_rx_free_callback_t)(ENET_Type *base, void *buffer, void *userData, uint8_t channel)

Defines the Rx memory buffer free function pointer. 




typedef struct _enet_config enet_config_t

Defines the basic configuration structure for the ENET device. 
Note:

Default the signal queue is used so the “multiqueueCfg” is set default with NULL. Set the pointer with a valid configration pointer if the multiple queues are required. If multiple queue is enabled, please make sure the buffer configuration for all are prepared also. 






typedef struct _enet_handle enet_handle_t





typedef void (*enet_callback_t)(ENET_Type *base, enet_handle_t *handle, enet_event_t event, uint8_t channel, enet_tx_reclaim_info_t *txReclaimInfo, void *userData)

ENET callback function. 




typedef struct _enet_tx_bd_ring enet_tx_bd_ring_t

Defines the ENET transmit buffer descriptor ring/queue structure. 




typedef struct _enet_rx_bd_ring enet_rx_bd_ring_t

Defines the ENET receive buffer descriptor ring/queue structure. 




typedef struct _enet_buffer_struct enet_buffer_struct_t





typedef struct _enet_rx_frame_attribute_struct enet_rx_frame_attribute_t

Rx frame attribute structure. 




typedef struct _enet_rx_frame_error enet_rx_frame_error_t

Defines the Rx frame error structure. 




typedef struct _enet_rx_frame_struct enet_rx_frame_struct_t

Defines the Rx frame data structure. 




typedef struct _enet_tx_config_struct enet_tx_config_struct_t





typedef struct _enet_tx_frame_struct enet_tx_frame_struct_t





typedef struct _enet_vlan_tag enet_vlan_tag_t

Ethernet VLAN Tag. 




typedef struct _enet_vlan_tx_config enet_vlan_tx_config_t

Ethernet VLAN configuration for Tx. 




typedef struct _enet_vlan_ctrl enet_vlan_ctrl_t

Ethernet VLAN control. 




typedef void (*enet_isr_t)(ENET_Type *base, enet_handle_t *handle)





const clock_ip_name_t s_enetClock[]

Pointers to enet clocks for each instance. 




ENET_FRAME_MAX_FRAMELEN

Default maximum ethernet frame size. 




ENET_FCS_LEN

Ethernet Rx frame FCS length. 




ENET_ADDR_ALIGNMENT

Recommended ethernet buffer alignment. 




ENET_BUFF_ALIGNMENT

Receive buffer alignment shall be 4bytes-aligned. 




ENET_RING_NUM_MAX

The maximum number of Tx/Rx descriptor rings. 




ENET_MTL_RXFIFOSIZE

The Rx fifo size. 




ENET_MTL_TXFIFOSIZE

The Tx fifo size. 




ENET_MACINT_ENUM_OFFSET

The offset for mac interrupt in enum type. 




ENET_FRAME_TX_LEN_LIMITATION

The Tx frame length software limitation. 




ENET_FRAME_RX_ERROR_BITS(x)

The Rx frame error bits field. 




void ENET_GetDefaultConfig(enet_config_t *config)

Gets the ENET default configuration structure. 
The purpose of this API is to get the default ENET configure structure for ENET_Init(). User may use the initialized structure unchanged in ENET_Init(), or modify some fields of the structure before calling ENET_Init(). Example: 
enet_config_t config;
ENET_GetDefaultConfig(&config);


 

Parameters:

config – The ENET mac controller configuration structure pointer. 







void ENET_Init(ENET_Type *base, const enet_config_t *config, uint8_t *macAddr, uint32_t clkSrcHz)

Initializes the ENET module. 
This function ungates the module clock and initializes it with the ENET basic configuration. 

Note
As our transactional transmit API use the zero-copy transmit buffer. So there are two thing we emphasize here:

Tx buffer free/requeue for application should be done in the Tx interrupt handler. Please set callback: kENET_TxIntEvent with Tx buffer free/requeue process APIs.
The Tx interrupt is forced to open.




Parameters:

base – ENET peripheral base address. 
config – ENET mac configuration structure pointer. The “enet_config_t” type mac configuration return from ENET_GetDefaultConfig can be used directly. It is also possible to verify the Mac configuration using other methods. 
macAddr – ENET mac address of Ethernet device. This MAC address should be provided. 
clkSrcHz – ENET input reference clock. 







void ENET_Deinit(ENET_Type *base)

Deinitializes the ENET module. 
This function gates the module clock and disables the ENET module.

Parameters:

base – ENET peripheral base address. 







status_t ENET_DescriptorInit(ENET_Type *base, enet_config_t *config, enet_buffer_config_t *bufferConfig)

Initialize for all ENET descriptors. 

Note
This function finishes all Tx/Rx descriptors initialization. The descriptor initialization should be called after ENET_Init().


Parameters:

base – ENET peripheral base address. 
config – The configuration for ENET. 
bufferConfig – All buffers configuration. 







status_t ENET_RxBufferAllocAll(ENET_Type *base, enet_handle_t *handle)

Allocates Rx buffers for all BDs. It’s used for zero copy Rx. In zero copy Rx case, Rx buffers are dynamic. This function will populate initial buffers in all BDs for receiving. Then ENET_GetRxFrame() is used to get Rx frame with zero copy, it will allocate new buffer to replace the buffer in BD taken by application, application should free those buffers after they’re used. 

Note
This function should be called after ENET_CreateHandler() and buffer allocating callback function should be ready.


Parameters:

base – ENET peripheral base address. 
handle – The ENET handler structure. This is the same handler pointer used in the ENET_Init. 







void ENET_RxBufferFreeAll(ENET_Type *base, enet_handle_t *handle)

Frees Rx buffers in all BDs. It’s used for zero copy Rx. In zero copy Rx case, Rx buffers are dynamic. This function will free left buffers in all BDs. 

Parameters:

base – ENET peripheral base address. 
handle – The ENET handler structure. This is the same handler pointer used in the ENET_Init. 







void ENET_StartRxTx(ENET_Type *base, uint8_t txRingNum, uint8_t rxRingNum)

Starts the ENET Tx/Rx. This function enable the Tx/Rx and starts the Tx/Rx DMA. This shall be set after ENET initialization and before starting to receive the data. 

Note
This must be called after all the ENET initilization. And should be called when the ENET receive/transmit is required. 


Parameters:

base – ENET peripheral base address. 
rxRingNum – The number of the used Rx rings. It shall not be larger than the ENET_RING_NUM_MAX(2). If the ringNum is set with 1, the ring 0 will be used. 
txRingNum – The number of the used Tx rings. It shall not be larger than the ENET_RING_NUM_MAX(2). If the ringNum is set with 1, the ring 0 will be used.







void ENET_SetISRHandler(ENET_Type *base, enet_isr_t ISRHandler)

Set the second level IRQ handler. 

Parameters:

base – ENET peripheral base address. 
ISRHandler – The handler to install. 







static inline void ENET_SetMII(ENET_Type *base, enet_mii_speed_t speed, enet_mii_duplex_t duplex)

Sets the ENET MII speed and duplex. 
This API is provided to dynamically change the speed and dulpex for MAC.

Parameters:

base – ENET peripheral base address. 
speed – The speed of the RMII mode. 
duplex – The duplex of the RMII mode. 







void ENET_SetSMI(ENET_Type *base, uint32_t clkSrcHz)

Sets the ENET SMI(serial management interface)- MII management interface. 

Parameters:

base – ENET peripheral base address. 
clkSrcHz – ENET peripheral clock source. 







static inline bool ENET_IsSMIBusy(ENET_Type *base)

Checks if the SMI is busy. 

Parameters:

base – ENET peripheral base address. 


Returns:
The status of MII Busy status. 






static inline uint16_t ENET_ReadSMIData(ENET_Type *base)

Reads data from the PHY register through SMI interface. 

Parameters:

base – ENET peripheral base address. 


Returns:
The data read from PHY 






void ENET_StartSMIWrite(ENET_Type *base, uint8_t phyAddr, uint8_t regAddr, uint16_t data)

Sends the MDIO IEEE802.3 Clause 22 format write command. 

Parameters:

base – ENET peripheral base address. 
phyAddr – The PHY address. 
regAddr – The PHY register. 
data – The data written to PHY. 







void ENET_StartSMIRead(ENET_Type *base, uint8_t phyAddr, uint8_t regAddr)

Sends the MDIO IEEE802.3 Clause 22 format read command. 

Parameters:

base – ENET peripheral base address. 
phyAddr – The PHY address. 
regAddr – The PHY register. 







status_t ENET_MDIOWrite(ENET_Type *base, uint8_t phyAddr, uint8_t regAddr, uint16_t data)

MDIO write with IEEE802.3 Clause 22 format. 

Parameters:

base – ENET peripheral base address. 
phyAddr – The PHY address. 
regAddr – The PHY register. 
data – The data written to PHY. 


Returns:
kStatus_Success MDIO access succeeds. 

Returns:
kStatus_Timeout MDIO access timeout. 






status_t ENET_MDIORead(ENET_Type *base, uint8_t phyAddr, uint8_t regAddr, uint16_t *pData)

MDIO read with IEEE802.3 Clause 22 format. 

Parameters:

base – ENET peripheral base address. 
phyAddr – The PHY address. 
regAddr – The PHY register. 
pData – The data read from PHY. 


Returns:
kStatus_Success MDIO access succeeds. 

Returns:
kStatus_Timeout MDIO access timeout. 






uint32_t ENET_GetInstance(ENET_Type *base)

Get the ENET instance from peripheral base address. 

Parameters:

base – ENET peripheral base address. 


Returns:
ENET instance. 






static inline void ENET_SetMacAddr(ENET_Type *base, uint8_t *macAddr)

Sets the ENET module Mac address. 

Parameters:

base – ENET peripheral base address. 
macAddr – The six-byte Mac address pointer. The pointer is allocated by application and input into the API. 







void ENET_GetMacAddr(ENET_Type *base, uint8_t *macAddr)

Gets the ENET module Mac address. 

Parameters:

base – ENET peripheral base address. 
macAddr – The six-byte Mac address pointer. The pointer is allocated by application and input into the API. 







static inline void ENET_AcceptAllMulticast(ENET_Type *base)

Enable ENET device to accept all multicast frames. 

Parameters:

base – ENET peripheral base address. 







static inline void ENET_RejectAllMulticast(ENET_Type *base)

ENET device reject to accept all multicast frames. 

Parameters:

base – ENET peripheral base address. 







void ENET_EnterPowerDown(ENET_Type *base, uint32_t *wakeFilter)

Set the MAC to enter into power down mode. the remote power wake up frame and magic frame can wake up the ENET from the power down mode. 

Parameters:

base – ENET peripheral base address. 
wakeFilter – The wakeFilter provided to configure the wake up frame fitlter. Set the wakeFilter to NULL is not required. But if you have the filter requirement, please make sure the wakeFilter pointer shall be eight continous 32-bits configuration. 







static inline void ENET_ExitPowerDown(ENET_Type *base)

Set the MAC to exit power down mode. Eixt from the power down mode and recover to normal work mode. 

Parameters:

base – ENET peripheral base address. 







status_t ENET_SetVlanCtrl(ENET_Type *base, enet_vlan_ctrl_t *control)

Set VLAN control. 

Parameters:

base – ENET peripheral base address. 
control – VLAN control configuration. 







status_t ENET_SetTxOuterVlan(ENET_Type *base, enet_vlan_tx_config_t *config, enet_vlan_tx_channel_t channel)

Set Tx outer VLAN configuration. 

Parameters:

base – ENET peripheral base address. 
config – Tx VLAN operation configuration. 
channel – The channel to apply this configuration. 







status_t ENET_SetTxInnerVlan(ENET_Type *base, enet_vlan_tx_config_t *config)

Set Tx inner VLAN configuration. 

Parameters:

base – ENET peripheral base address. 
config – Tx VLAN operation configuration. 







void ENET_EnableInterrupts(ENET_Type *base, uint32_t mask)

Enables the ENET DMA and MAC interrupts. 
This function enables the ENET interrupts according to the provided mask. Already enabled interrupts stay enabled even if not listed in the provided mask. The mask is a logical OR of enet_dma_interrupt_enable_t and enet_mac_interrupt_enable_t. For example, to enable the dma and mac interrupt, do the following. 
ENET_EnableInterrupts(ENET, kENET_DmaRx | kENET_DmaTx | kENET_MacPmt);




Parameters:

base – ENET peripheral base address. 
mask – ENET interrupts to enable. This is a logical OR of both enumeration :: enet_dma_interrupt_enable_t and enet_mac_interrupt_enable_t. 







void ENET_DisableInterrupts(ENET_Type *base, uint32_t mask)

Disables the ENET DMA and MAC interrupts. 
This function disables the ENET interrupt according to the provided mask. The mask is a logical OR of enet_dma_interrupt_enable_t and enet_mac_interrupt_enable_t. For example, to disable the dma and mac interrupt, do the following. 
ENET_DisableInterrupts(ENET, kENET_DmaRx | kENET_DmaTx | kENET_MacPmt);




Parameters:

base – ENET peripheral base address. 
mask – ENET interrupts to disables. This is a logical OR of both enumeration :: enet_dma_interrupt_enable_t and enet_mac_interrupt_enable_t. 







static inline uint32_t ENET_GetDmaInterruptStatus(ENET_Type *base, uint8_t channel)

Gets the ENET DMA interrupt status flag. 

Parameters:

base – ENET peripheral base address. 
channel – The DMA Channel. Shall not be larger than ENET_RING_NUM_MAX. 


Returns:
The event status of the interrupt source. This is the logical OR of members of the enumeration :: enet_dma_interrupt_enable_t. 






static inline void ENET_ClearDmaInterruptStatus(ENET_Type *base, uint8_t channel, uint32_t mask)

Clear the ENET DMA interrupt status flag. 

Parameters:

base – ENET peripheral base address. 
channel – The DMA Channel. Shall not be larger than ENET_RING_NUM_MAX. 
mask – The event status of the interrupt source. This is the logical OR of members of the enumeration :: enet_dma_interrupt_enable_t. 







static inline uint32_t ENET_GetMacInterruptStatus(ENET_Type *base)

Gets the ENET MAC interrupt status flag. 

Parameters:

base – ENET peripheral base address. 


Returns:
The event status of the interrupt source. Use the enum in enet_mac_interrupt_enable_t and right shift ENET_MACINT_ENUM_OFFSET to mask the returned value to get the exact interrupt status. 






void ENET_ClearMacInterruptStatus(ENET_Type *base, uint32_t mask)

Clears the ENET mac interrupt events status flag. 
This function clears enabled ENET interrupts according to the provided mask. The mask is a logical OR of enumeration members. See the enet_mac_interrupt_enable_t. For example, to clear the TX frame interrupt and RX frame interrupt, do the following. 
ENET_ClearMacInterruptStatus(ENET, kENET_MacPmt);




Parameters:

base – ENET peripheral base address. 
mask – ENET interrupt source to be cleared. This is the logical OR of members of the enumeration :: enet_mac_interrupt_enable_t. 







static inline bool ENET_IsTxDescriptorDmaOwn(enet_tx_bd_struct_t *txDesc)

Get the Tx descriptor DMA Own flag. 

Parameters:

txDesc – The given Tx descriptor. 


Return values:
True – the dma own Tx descriptor, false application own Tx descriptor. 






void ENET_SetupTxDescriptor(enet_tx_bd_struct_t *txDesc, void *buffer1, uint32_t bytes1, void *buffer2, uint32_t bytes2, uint32_t framelen, bool intEnable, bool tsEnable, enet_desc_flag_t flag, uint8_t slotNum)

Setup a given Tx descriptor. This function is a low level functional API to setup or prepare a given Tx descriptor. 

Note
This must be called after all the ENET initilization. And should be called when the ENET receive/transmit is required. Transmit buffers are ‘zero-copy’ buffers, so the buffer must remain in memory until the packet has been fully transmitted. The buffers should be free or requeued in the transmit interrupt irq handler. 


Parameters:

txDesc – The given Tx descriptor. 
buffer1 – The first buffer address in the descriptor. 
bytes1 – The bytes in the fist buffer. 
buffer2 – The second buffer address in the descriptor. 
bytes2 – The bytes in the second buffer. 
framelen – The length of the frame to be transmitted. 
intEnable – Interrupt enable flag. 
tsEnable – The timestamp enable. 
flag – The flag of this Tx desciriptor, see “enet_desc_flag_t” . 
slotNum – The slot num used for AV mode only.







static inline void ENET_UpdateTxDescriptorTail(ENET_Type *base, uint8_t channel, uint32_t txDescTailAddrAlign)

Update the Tx descriptor tail pointer. This function is a low level functional API to update the the Tx descriptor tail. This is called after you setup a new Tx descriptor to update the tail pointer to make the new descritor accessable by DMA. 

Parameters:

base – ENET peripheral base address. 
channel – The Tx DMA channel. 
txDescTailAddrAlign – The new Tx tail pointer address. 







static inline void ENET_UpdateRxDescriptorTail(ENET_Type *base, uint8_t channel, uint32_t rxDescTailAddrAlign)

Update the Rx descriptor tail pointer. This function is a low level functional API to update the the Rx descriptor tail. This is called after you setup a new Rx descriptor to update the tail pointer to make the new descritor accessable by DMA and to anouse the Rx poll command for DMA. 

Parameters:

base – ENET peripheral base address. 
channel – The Rx DMA channel. 
rxDescTailAddrAlign – The new Rx tail pointer address. 







static inline uint32_t ENET_GetRxDescriptor(enet_rx_bd_struct_t *rxDesc)

Gets the context in the ENET Rx descriptor. This function is a low level functional API to get the the status flag from a given Rx descriptor. 

Note
This must be called after all the ENET initilization. And should be called when the ENET receive/transmit is required. 


Parameters:

rxDesc – The given Rx descriptor. 


Return values:
The – RDES3 regions for write-back format Rx buffer descriptor.






void ENET_UpdateRxDescriptor(enet_rx_bd_struct_t *rxDesc, void *buffer1, void *buffer2, bool intEnable, bool doubleBuffEnable)

Updates the buffers and the own status for a given Rx descriptor. This function is a low level functional API to Updates the buffers and the own status for a given Rx descriptor. 

Note
This must be called after all the ENET initilization. And should be called when the ENET receive/transmit is required. 


Parameters:

rxDesc – The given Rx descriptor. 
buffer1 – The first buffer address in the descriptor. 
buffer2 – The second buffer address in the descriptor. 
intEnable – Interrupt enable flag. 
doubleBuffEnable – The double buffer enable flag.







void ENET_CreateHandler(ENET_Type *base, enet_handle_t *handle, enet_config_t *config, enet_buffer_config_t *bufferConfig, enet_callback_t callback, void *userData)

Create ENET Handler. 
This is a transactional API and it’s provided to store all datas which are needed during the whole transactional process. This API should not be used when you use functional APIs to do data Tx/Rx. This is funtion will store many data/flag for transactional use.

Parameters:

base – ENET peripheral base address. 
handle – ENET handler. 
config – ENET configuration. 
bufferConfig – ENET buffer configuration. 
callback – The callback function. 
userData – The application data. 







status_t ENET_GetRxFrameSize(ENET_Type *base, enet_handle_t *handle, uint32_t *length, uint8_t channel)

Gets the size of the read frame. This function gets a received frame size from the ENET buffer descriptors. 

Note
The FCS of the frame is automatically removed by MAC and the size is the length without the FCS. After calling ENET_GetRxFrameSize, ENET_ReadFrame() should be called to update the receive buffers If the result is not “kStatus_ENET_RxFrameEmpty”.


Parameters:

base – ENET peripheral base address. 
handle – The ENET handler structure. This is the same handler pointer used in the ENET_Init. 
length – The length of the valid frame received. 
channel – The DMAC channel for the Rx. 


Return values:

kStatus_ENET_RxFrameEmpty – No frame received. Should not call ENET_ReadFrame to read frame. 
kStatus_ENET_RxFrameError – Data error happens. ENET_ReadFrame should be called with NULL data and NULL length to update the receive buffers. 
kStatus_Success – Receive a frame Successfully then the ENET_ReadFrame should be called with the right data buffer and the captured data length input. 







status_t ENET_ReadFrame(ENET_Type *base, enet_handle_t *handle, uint8_t *data, uint32_t length, uint8_t channel, enet_ptp_time_t *timestamp)

Reads a frame from the ENET device. This function reads a frame from the ENET DMA descriptors. The ENET_GetRxFrameSize should be used to get the size of the prepared data buffer. For example use Rx dma channel 0: 
uint32_t length;
enet_handle_t g_handle;
Comment: Get the received frame size firstly.
status = ENET_GetRxFrameSize(&g_handle, &length, 0);
if (length != 0)
{
    Comment: Allocate memory here with the size of "length"
    uint8_t *data = memory allocate interface;
    if (!data)
    {
        ENET_ReadFrame(ENET, &g_handle, NULL, 0, 0);
    }
    else
    {
       status = ENET_ReadFrame(ENET, &g_handle, data, length, 0);
    }
}
else if (status == kStatus_ENET_RxFrameError)
{
    Comment: Update the received buffer when a error frame is received.
    ENET_ReadFrame(ENET, &g_handle, NULL, 0, 0);
}


 

Parameters:

base – ENET peripheral base address. 
handle – The ENET handler structure. This is the same handler pointer used in the ENET_Init. 
data – The data buffer provided by user to store the frame which memory size should be at least “length”. 
length – The size of the data buffer which is still the length of the received frame. 
channel – The Rx DMA channel. Shall not be larger than 2. 
timestamp – The timestamp address to store received timestamp. 


Returns:
The execute status, successful or failure. 






status_t ENET_GetRxFrame(ENET_Type *base, enet_handle_t *handle, enet_rx_frame_struct_t *rxFrame, uint8_t channel)

Receives one frame in specified BD ring with zero copy. 
This function will use the user-defined allocate and free callback. Every time application gets one frame through this function, driver will allocate new buffers for the BDs whose buffers have been taken by application. 

Note
This function will drop current frame and update related BDs as available for DMA if new buffers allocating fails. Application must provide a memory pool including at least BD number + 1 buffers(+2 if enable double buffer) to make this function work normally.


Parameters:

base – ENET peripheral base address. 
handle – The ENET handler pointer. This is the same handler pointer used in the ENET_Init. 
rxFrame – The received frame information structure provided by user. 
channel – The Rx DMA channel. Shall not be larger than 2. 


Return values:

kStatus_Success – Succeed to get one frame and allocate new memory for Rx buffer. 
kStatus_ENET_RxFrameEmpty – There’s no Rx frame in the BD. 
kStatus_ENET_RxFrameError – There’s issue in this receiving. In this function, issue frame will be dropped. 
kStatus_ENET_RxFrameDrop – There’s no new buffer memory for BD, dropped this frame. 







status_t ENET_SendFrame(ENET_Type *base, enet_handle_t *handle, enet_tx_frame_struct_t *txFrame, uint8_t channel)

Transmits an ENET frame. 

Note
The CRC is automatically appended to the data. Input the data to send without the CRC. This API uses input buffer for Tx, application should reclaim the buffer after Tx is over.


Parameters:

base – ENET peripheral base address. 
handle – The ENET handler pointer. This is the same handler pointer used in the ENET_Init. 
txFrame – The Tx frame structure. 
channel – Channel to send the frame, same with queue index. 


Return values:

kStatus_Success – Send frame succeed. 
kStatus_ENET_TxFrameBusy – Transmit buffer descriptor is busy under transmission. The transmit busy happens when the data send rate is over the MAC capacity. The waiting mechanism is recommended to be added after each call return with kStatus_ENET_TxFrameBusy. Also need to pay attention to reclaim Tx frame after Tx is over. 
kStatus_ENET_TxFrameOverLen – Transmit frme length exceeds the 0x3FFF limit defined by the driver. 







void ENET_ReclaimTxDescriptor(ENET_Type *base, enet_handle_t *handle, uint8_t channel)

Reclaim Tx descriptors. This function is used to update the Tx descriptor status and store the Tx timestamp when the 1588 feature is enabled. This is called by the transmit interupt IRQ handler after the complete of a frame transmission. 

Parameters:

base – ENET peripheral base address. 
handle – The ENET handler pointer. This is the same handler pointer used in the ENET_Init. 
channel – The Tx DMA channnel. 







void ENET_IRQHandler(ENET_Type *base, enet_handle_t *handle)

The ENET IRQ handler. 

Parameters:

base – ENET peripheral base address. 
handle – The ENET handler pointer. 







FSL_ENET_DRIVER_VERSION

Defines the driver version. 




ENET_RXDESCRIP_RD_BUFF1VALID_MASK

Defines for read format. 
Buffer1 address valid. 




ENET_RXDESCRIP_RD_BUFF2VALID_MASK

Buffer2 address valid. 




ENET_RXDESCRIP_RD_IOC_MASK

Interrupt enable on complete. 




ENET_RXDESCRIP_RD_OWN_MASK

Own bit. 




ENET_RXDESCRIP_WR_ERR_MASK

Defines for write back format. 




ENET_RXDESCRIP_WR_PYLOAD_MASK





ENET_RXDESCRIP_WR_PTPMSGTYPE_MASK





ENET_RXDESCRIP_WR_PTPTYPE_MASK





ENET_RXDESCRIP_WR_PTPVERSION_MASK





ENET_RXDESCRIP_WR_PTPTSA_MASK





ENET_RXDESCRIP_WR_PACKETLEN_MASK





ENET_RXDESCRIP_WR_ERRSUM_MASK





ENET_RXDESCRIP_WR_TYPE_MASK





ENET_RXDESCRIP_WR_DE_MASK





ENET_RXDESCRIP_WR_RE_MASK





ENET_RXDESCRIP_WR_OE_MASK





ENET_RXDESCRIP_WR_RS0V_MASK





ENET_RXDESCRIP_WR_RS1V_MASK





ENET_RXDESCRIP_WR_RS2V_MASK





ENET_RXDESCRIP_WR_LD_MASK





ENET_RXDESCRIP_WR_FD_MASK





ENET_RXDESCRIP_WR_CTXT_MASK





ENET_RXDESCRIP_WR_OWN_MASK





ENET_TXDESCRIP_RD_BL1_MASK

Defines for read format. 




ENET_TXDESCRIP_RD_BL2_MASK





ENET_TXDESCRIP_RD_BL1(n)





ENET_TXDESCRIP_RD_BL2(n)





ENET_TXDESCRIP_RD_TTSE_MASK





ENET_TXDESCRIP_RD_IOC_MASK





ENET_TXDESCRIP_RD_FL_MASK





ENET_TXDESCRIP_RD_FL(n)





ENET_TXDESCRIP_RD_CIC(n)





ENET_TXDESCRIP_RD_TSE_MASK





ENET_TXDESCRIP_RD_SLOT(n)





ENET_TXDESCRIP_RD_SAIC(n)





ENET_TXDESCRIP_RD_CPC(n)





ENET_TXDESCRIP_RD_LDFD(n)





ENET_TXDESCRIP_RD_LD_MASK





ENET_TXDESCRIP_RD_FD_MASK





ENET_TXDESCRIP_RD_CTXT_MASK





ENET_TXDESCRIP_RD_OWN_MASK





ENET_TXDESCRIP_WB_TTSS_MASK

Defines for write back format. 




ENET_ABNORM_INT_MASK





ENET_NORM_INT_MASK





__IO uint32_t rdes0
Receive descriptor 0 




__IO uint32_t rdes1
Receive descriptor 1 




__IO uint32_t rdes2
Receive descriptor 2 




__IO uint32_t rdes3
Receive descriptor 3 




__IO uint32_t tdes0
Transmit descriptor 0 




__IO uint32_t tdes1
Transmit descriptor 1 




__IO uint32_t tdes2
Transmit descriptor 2 




__IO uint32_t tdes3
Transmit descriptor 3 




void *buffer1

The first buffer address in the descriptor. 




uint32_t bytes1

The bytes in the fist buffer. 




void *buffer2

The second buffer address in the descriptor. 




uint32_t bytes2

The bytes in the second buffer. 




uint32_t framelen

The length of the frame to be transmitted. 




bool intEnable

Interrupt enable flag. 




bool tsEnable

The timestamp enable. 




enet_tx_offload_t txOffloadOps

The Tx checksum offload option, only vaild for Queue 0. 




enet_desc_flag_t flag

The flag of this tx desciriptor, see “enet_qos_desc_flag”. 




uint8_t slotNum

The slot number used for AV mode only. 




uint64_t second

Second. 




uint32_t nanosecond

Nanosecond. 




void *context

User specified data, could be buffer address for free 




bool isTsAvail

Flag indicates timestamp available status 




enet_ptp_time_t timeStamp

Timestamp of frame 




enet_tx_reclaim_info_t *txDirtyBase

Dirty buffer descriptor base address pointer. 




uint16_t txGenIdx

Tx generate index. 




uint16_t txConsumIdx

Tx consume index. 




uint16_t txRingLen

Tx ring length. 




bool isFull

Tx ring is full flag, add this parameter to avoid waste one element. 




uint8_t rxRingLen

The length of receive buffer descriptor ring. 




uint8_t txRingLen

The length of transmit buffer descriptor ring. 




enet_tx_bd_struct_t *txDescStartAddrAlign

Aligned transmit descriptor start address. 




enet_tx_bd_struct_t *txDescTailAddrAlign

Aligned transmit descriptor tail address. 




enet_tx_reclaim_info_t *txDirtyStartAddr

Start address of the dirty Tx frame information. 




enet_rx_bd_struct_t *rxDescStartAddrAlign

Aligned receive descriptor start address. 




enet_rx_bd_struct_t *rxDescTailAddrAlign

Aligned receive descriptor tail address. 




uint32_t *rxBufferStartAddr

Start address of the Rx buffers. 




uint32_t rxBuffSizeAlign

Aligned receive data buffer size. 




enet_dma_tx_sche_t dmaTxSche

Transmit arbitation. 




enet_dma_burstlen_t burstLen

Burset len for the queue 1. 




uint8_t txdmaChnWeight[ENET_MTL_QUEUE_COUNT]

Transmit channel weight. 




enet_mtl_multiqueue_txsche_t mtltxSche

Transmit schedule for multi-queue. 




enet_mtl_multiqueue_rxsche_t mtlrxSche

Receive schedule for multi-queue. 




uint8_t rxqueweight[ENET_MTL_QUEUE_COUNT]

Refer to the MTL RxQ Control register. 




uint32_t txqueweight[ENET_MTL_QUEUE_COUNT]

Refer to the MTL TxQ Quantum Weight register. 




uint8_t rxqueuePrio[ENET_MTL_QUEUE_COUNT]

Receive queue priority. 




uint8_t txqueuePrio[ENET_MTL_QUEUE_COUNT]

Refer to Transmit Queue Priority Mapping register. 




enet_mtl_rxqueuemap_t mtlrxQuemap

Rx queue DMA Channel mapping. 




uint16_t specialControl

The logicl or of enet_special_config_t 




uint32_t ptpClkHz

The PTP module source clock. 




enet_multiqueue_config_t *multiqueueCfg

Use both Tx/Rx queue(dma channel) 0 and 1. 




uint32_t interrupt

MAC interrupt source. A logical OR of enet_dma_interrupt_enable_t and enet_mac_interrupt_enable_t. 




enet_mii_mode_t miiMode

MII mode. 




enet_mii_speed_t miiSpeed

MII Speed. 




enet_mii_duplex_t miiDuplex

MII duplex. 




uint16_t pauseDuration

Used in the Tx flow control frame, only valid when kENET_FlowControlEnable is set. 




enet_rx_alloc_callback_t rxBuffAlloc

Callback to alloc memory, must be provided for zero-copy Rx. 




enet_rx_free_callback_t rxBuffFree

Callback to free memory, must be provided for zero-copy Rx. 




enet_tx_bd_struct_t *txBdBase

Buffer descriptor base address pointer. 




uint16_t txGenIdx

Tx generate index. 




uint16_t txConsumIdx

Tx consum index. 




volatile uint16_t txDescUsed

Tx descriptor used number. 




uint16_t txRingLen

Tx ring length. 




enet_rx_bd_struct_t *rxBdBase

Buffer descriptor base address pointer. 




uint16_t rxGenIdx

The current available receive buffer descriptor pointer. 




uint16_t rxRingLen

Receive ring length. 




uint32_t rxBuffSizeAlign

Receive buffer size. 




bool multiQueEnable

Multi-queue enable status. 




bool doubleBuffEnable

The double buffer enable status. 




bool rxintEnable

Rx interrupt enable status. 




enet_rx_bd_ring_t rxBdRing[ENET_MTL_QUEUE_COUNT]

Receive buffer descriptor. 




enet_tx_bd_ring_t txBdRing[ENET_MTL_QUEUE_COUNT]

Transmit buffer descriptor. 




enet_tx_dirty_ring_t txDirtyRing[ENET_MTL_QUEUE_COUNT]

Transmit dirty buffers addresses. 




uint32_t *rxBufferStartAddr[ENET_MTL_QUEUE_COUNT]

The Init-Rx buffers used for reinit corrupted BD due to write-back operation. 




uint32_t txLenLimitation[ENET_MTL_QUEUE_COUNT]

Tx frame length limitation. 




enet_callback_t callback

Callback function. 




void *userData

Callback function parameter. 




enet_rx_alloc_callback_t rxBuffAlloc

Callback to alloc memory, must be provided for zero-copy Rx. 




enet_rx_free_callback_t rxBuffFree

Callback to free memory, must be provided for zero-copy Rx. 




void *buffer

The buffer stores the whole or partial frame. 




uint16_t length

The byte length of this buffer. 




bool isTsAvail

Rx frame timestamp is available or not. 




enet_ptp_time_t timestamp

The nanosecond part timestamp of this Rx frame. 




bool statsDribbleErr

The received packet has a non-integer multiple of bytes (odd nibbles). 




bool statsRxErr

Receive error. 




bool statsOverflowErr

Rx FIFO overflow error. 




bool statsWatchdogTimeoutErr

Receive watchdog timeout. 




bool statsGaintPacketErr

Receive error. 




bool statsRxFcsErr

Receive CRC error. 




enet_buffer_struct_t *rxBuffArray

Rx frame buffer structure. 




uint16_t totLen

Rx frame total length. 




enet_rx_frame_attribute_t rxAttribute

Rx frame attribute structure. 




enet_rx_frame_error_t rxFrameError

Rx frame error. 




uint8_t intEnable

Enable interrupt every time one BD is completed. 




uint8_t tsEnable

Transmit timestamp enable. 




uint8_t slotNum

Slot number control bits in AV mode. 




enet_tx_offload_t txOffloadOps

Tx checksum offload option. 




enet_buffer_struct_t *txBuffArray

Tx frame buffer structure. 




uint32_t txBuffNum

Buffer number of this Tx frame. 




enet_tx_config_struct_t txConfig

Tx extra configuation. 




void *context

Driver reclaims and gives it in Tx over callback. 




enet_vlan_tpid_t tpid

VLAN TPID. 




uint16_t pcp

VLAN Priority. 




uint16_t dei

Drop Eligible indicator. 




uint16_t vid

VLAN Identifier. 




bool txDescVlan

Use VLAN configuration in Tx descriptor. 




enet_vlan_tag_t tag

VLAN Tag. 




enet_vlan_ops_t ops

VLAN operations. 




bool svlanEnable

The MAC transmitter and receiver consider the S-VLAN packets. 




bool vlanInverseMatch

True: Marks frames without matching as match, False: Marks matched frames. 




bool vidComparison

Only takes VLAN VID as match. 




bool disableVlanTypeCheck

Not check C-VLAN and S-VLAN. 




bool doubleVlanEnable

Enable the inner VLAN operations. 




bool innerVlanFilterMatch

Takes Inner VLAN as match. 




bool outerTagInRxStatus

Set outer VLAN in Rx Status. 




bool innerTagInRxStatus

Set inner VLAN in Rx Status. 




enet_vlan_tag_t rxVlanTag

VLAN tag for Rx match. 




enet_vlan_strip_t rxOuterVlanStrip

Outer VLAN Rx strip operation. 




enet_vlan_strip_t rxInnerVlanStrip

Inner VLAN Rx strip operation. 




struct _enet_rx_bd_struct


#include <fsl_enet.h>
Defines the receive descriptor structure It has the read-format and write-back format structures. They both have the same size with different region definition. So we define common name as the recive descriptor structure. When initialize the buffer descriptors, read-format region mask bits should be used. When Rx frame has been in the buffer descriptors, write-back format region store the Rx result information. 




struct _enet_tx_bd_struct


#include <fsl_enet.h>
Defines the transmit descriptor structure It has the read-format and write-back format structure. They both has the same size with different region definition. So we define common name as the transmit descriptor structure. When initialize the buffer descriptors for Tx, read-format region mask bits should be used. When frame has been transmitted, write-back format region store the Tx result information. 




struct _enet_tx_bd_config_struct


#include <fsl_enet.h>
Defines the Tx BD configuration structure. 




struct _enet_ptp_time


#include <fsl_enet.h>
Defines the ENET PTP time stamp structure. 




struct enet_tx_reclaim_info


#include <fsl_enet.h>
Defines the Tx reclaim information structure. 




struct _enet_tx_dirty_ring


#include <fsl_enet.h>
Defines the ENET transmit dirty addresses ring/queue structure. 




struct _enet_buffer_config


#include <fsl_enet.h>
Defines the buffer descriptor configure structure. 
Notes:

The receive and transmit descriptor start address pointer and tail pointer must be word-aligned.
The recommended minimum Tx/Rx ring length is 4.
The Tx/Rx descriptor tail address shall be the address pointer to the address just after the end of the last last descriptor. because only the descriptors between the start address and the tail address will be used by DMA.
The decriptor address is the start address of all used contiguous memory. for example, the rxDescStartAddrAlign is the start address of rxRingLen contiguous descriptor memorise for Rx descriptor ring 0.
The “*rxBufferstartAddr” is the first element of rxRingLen (2*rxRingLen for double buffers) Rx buffers. It means the *rxBufferStartAddr is the Rx buffer for the first descriptor the *rxBufferStartAddr + 1 is the Rx buffer for the second descriptor or the Rx buffer for the second buffer in the first descriptor. So please make sure the rxBufferStartAddr is the address of a rxRingLen or 2*rxRingLen array. 






struct enet_multiqueue_config


#include <fsl_enet.h>
Defines the configuration when multi-queue is used. 




struct _enet_config


#include <fsl_enet.h>
Defines the basic configuration structure for the ENET device. 
Note:

Default the signal queue is used so the “multiqueueCfg” is set default with NULL. Set the pointer with a valid configration pointer if the multiple queues are required. If multiple queue is enabled, please make sure the buffer configuration for all are prepared also. 






struct _enet_tx_bd_ring


#include <fsl_enet.h>
Defines the ENET transmit buffer descriptor ring/queue structure. 




struct _enet_rx_bd_ring


#include <fsl_enet.h>
Defines the ENET receive buffer descriptor ring/queue structure. 




struct _enet_handle


#include <fsl_enet.h>
Defines the ENET handler structure. 




struct _enet_buffer_struct





struct _enet_rx_frame_attribute_struct


#include <fsl_enet.h>
Rx frame attribute structure. 




struct _enet_rx_frame_error


#include <fsl_enet.h>
Defines the Rx frame error structure. 




struct _enet_rx_frame_struct


#include <fsl_enet.h>
Defines the Rx frame data structure. 




struct _enet_tx_config_struct





struct _enet_tx_frame_struct





struct _enet_vlan_tag


#include <fsl_enet.h>
Ethernet VLAN Tag. 




struct _enet_vlan_tx_config


#include <fsl_enet.h>
Ethernet VLAN configuration for Tx. 




struct _enet_vlan_ctrl


#include <fsl_enet.h>
Ethernet VLAN control. 




ENET: Ethernet Driver#


MCX_SPC: System Power Control driver#


uint8_t SPC_GetPeriphIOIsolationStatus(SPC_Type *base)

Gets Isolation status for each power domains. 
This function gets the status which indicates whether certain peripheral and the IO pads are in a latched state as a result of having been in POWERDOWN mode.

Parameters:

base – SPC peripheral base address. 


Returns:
Current isolation status for each power domains. See _spc_power_domains for details. 






static inline void SPC_ClearPeriphIOIsolationFlag(SPC_Type *base)

Clears peripherals and I/O pads isolation flags for each power domains. 
This function clears peripherals and I/O pads isolation flags for each power domains. After recovering from the POWERDOWN mode, user must invoke this function to release the I/O pads and certain peripherals to their normal run mode state. Before invoking this function, user must restore chip configuration in particular pin configuration for enabled WUU wakeup pins.

Parameters:

base – SPC peripheral base address. 







static inline bool SPC_GetBusyStatusFlag(SPC_Type *base)

Gets SPC busy status flag. 
This function gets SPC busy status flag. When SPC executing any type of power mode transition in ACTIVE mode or any of the SOC low power mode, the SPC busy status flag is set and this function returns true. When changing CORE LDO voltage level and DCDC voltage level in ACTIVE mode, the SPC busy status flag is set and this function return true.

Parameters:

base – SPC peripheral base address. 


Returns:
Ack busy flag. true - SPC is busy. false - SPC is not busy. 






static inline bool SPC_CheckLowPowerReqest(SPC_Type *base)

Checks system low power request. 

Note
Only when all power domains request low power mode entry, the result of this function is true. That means when all power domains request low power mode entry, the SPC regulators will be controlled by LP_CFG register.


Parameters:

base – SPC peripheral base address. 


Returns:
The system low power request check result.

true All power domains have requested low power mode and SPC has entered a low power state and power mode configuration are based on the LP_CFG configuration register.
false SPC in active mode and ACTIVE_CFG register control system power supply. 








static inline void SPC_ClearLowPowerRequest(SPC_Type *base)

Clears system low power request, set SPC in active mode. 

Parameters:

base – SPC peripheral base address. 







static inline spc_power_domain_low_power_mode_t SPC_GetRequestedLowPowerMode(SPC_Type *base)

Check the last low-power mode that the power domain requested. 

Parameters:

base – SPC peripheral base address.


Returns:
The last low-power mode that the power domain requested. 






static inline bool SPC_CheckSwitchState(SPC_Type *base)

Checks whether the power switch is on. 

Parameters:

base – SPC peripheral base address.


Return values:

true – The power switch is on. 
false – The power switch is off. 







spc_power_domain_low_power_mode_t SPC_GetPowerDomainLowPowerMode(SPC_Type *base, spc_power_domain_id_t powerDomainId)

Gets selected power domain’s requested low power mode. 

Parameters:

base – SPC peripheral base address. 
powerDomainId – Power Domain Id, please refer to spc_power_domain_id_t.


Returns:
The selected power domain’s requested low power mode, please refer to spc_power_domain_low_power_mode_t. 






static inline bool SPC_CheckPowerDomainLowPowerRequest(SPC_Type *base, spc_power_domain_id_t powerDomainId)

Checks power domain’s low power request. 

Parameters:

base – SPC peripheral base address. 
powerDomainId – Power Domain Id, please refer to spc_power_domain_id_t. 


Returns:
The result of power domain’s low power request.

true The selected power domain requests low power mode entry.
false The selected power domain does not request low power mode entry. 








static inline void SPC_ClearPowerDomainLowPowerRequestFlag(SPC_Type *base, spc_power_domain_id_t powerDomainId)

Clears selected power domain’s low power request flag. 

Parameters:

base – SPC peripheral base address. 
powerDomainId – Power Domain Id, please refer to spc_power_domain_id_t. 







static inline void SPC_TrimSRAMLdoRefVoltage(SPC_Type *base, uint8_t trimValue)

Trims SRAM retention regulator reference voltage, trim step is 12 mV, range is around 0.48V to 0.85V. 

Parameters:

base – SPC peripheral base address. 
trimValue – Reference voltage trim value. 







static inline void SPC_EnableSRAMLdo(SPC_Type *base, bool enable)

Enables/disables SRAM retention LDO. 

Parameters:

base – SPC peripheral base address. 
enable – Used to enable/disable SRAM LDO :

true Enable SRAM LDO;
false Disable SRAM LDO. 









static inline void SPC_RetainSRAMArray(SPC_Type *base, uint8_t mask)


Parameters:

base – SPC peripheral base address. 
mask – The OR’ed value of SRAM Array. 







static inline void SPC_UnRetainSRAMArray(SPC_Type *base, uint8_t mask)

Unretain SRAM array. 

Parameters:

base – SPC peripheral base address. 
mask – The OR’ed value of SRAM Array. 







void SPC_SetLowPowerRequestConfig(SPC_Type *base, const spc_lowpower_request_config_t *config)

Configs Low power request output pin. 
This function config the low power request output pin

Parameters:

base – SPC peripheral base address. 
config – Pointer the spc_lowpower_request_config_t structure. 







static inline void SPC_EnableIntegratedPowerSwitchManually(SPC_Type *base, bool enable)

Enables/disables the integrated power switch manually. 

Parameters:

base – SPC peripheral base address. 
enable – Used to enable/disable the integrated power switch:

true Enable the integrated power switch;
false Disable the integrated power switch. 









static inline void SPC_EnableIntegratedPowerSwitchAutomatically(SPC_Type *base, bool sleepGate, bool wakeupUngate)

Enables/disables the integrated power switch automatically. 
To gate the integrated power switch when chip enter low power modes, and ungate the switch after wake-up from low power modes: 
SPC_EnableIntegratedPowerSwitchAutomatically(SPC, true, true);




Parameters:

base – SPC peripheral base address. 
sleepGate – Enable the integrated power switch when chip enter low power modes:

true SPC asserts an output pin at low-power entry to power-gate the switch;
false SPC does not assert an output pin at low-power entry to power-gate the switch. 


wakeupUngate – Enables the switch after wake-up from low power modes:

true SPC asserts an output pin at low-power exit to power-ungate the switch;
false SPC does not assert an output pin at low-power exit to power-ungate the switch. 









void SPC_SetSRAMOperateVoltage(SPC_Type *base, const spc_sram_voltage_config_t *config)

Set SRAM operate voltage. 

Parameters:

base – SPC peripheral base address. 
config – The pointer to spc_sram_voltage_config_t, specifies the configuration of sram voltage. 







static inline spc_bandgap_mode_t SPC_GetActiveModeBandgapMode(SPC_Type *base)

Gets the Bandgap mode in Active mode. 

Parameters:

base – SPC peripheral base address. 


Returns:
Bandgap mode in the type of spc_bandgap_mode_t enumeration. 






static inline uint32_t SPC_GetActiveModeVoltageDetectStatus(SPC_Type *base)

Gets all voltage detectors status in Active mode. 

Parameters:

base – SPC peripheral base address. 


Returns:
All voltage detectors status in Active mode. 






status_t SPC_SetActiveModeBandgapModeConfig(SPC_Type *base, spc_bandgap_mode_t mode)

Configs Bandgap mode in Active mode. 

Note
To disable bandgap in Active mode:

Disable all LVD’s and HVD’s in active mode;
Disable Glitch detect;
Configrue LDO’s and DCDC to low drive strength in active mode;
Invoke this function to disable bandgap in active mode; otherwise the error status will be reported.




Note
Some other system resources(such as PLL, CMP) require bandgap to be enabled, to disable bandgap please take care of other system resources.


Parameters:

base – SPC peripheral base address. 
mode – The Bandgap mode be selected.


Return values:

kStatus_SPC_BandgapModeWrong – The Bandgap can not be disabled in active mode. 
kStatus_Success – Config Bandgap mode in Active power mode successful. 







static inline void SPC_EnableActiveModeCMPBandgapBuffer(SPC_Type *base, bool enable)

Enables/Disable the CMP Bandgap Buffer in Active mode. 

Parameters:

base – SPC peripheral base address. 
enable – Enable/Disable CMP Bandgap buffer. true - Enable Buffer Stored Reference voltage to CMP. false - Disable Buffer Stored Reference voltage to CMP. 







static inline void SPC_SetActiveModeVoltageTrimDelay(SPC_Type *base, uint16_t delay)

Sets the delay when the regulators change voltage level in Active mode. 

Parameters:

base – SPC peripheral base address. 
delay – The number of SPC timer clock cycles. 







status_t SPC_SetActiveModeRegulatorsConfig(SPC_Type *base, const spc_active_mode_regulators_config_t *config)

Configs all settings of regulators in Active mode at a time. 

Note
This function is used to overwrite all settings of regulators(including bandgap mode, regulators’ drive strength and voltage level) in active mode at a time.


Note
Enable/disable LVDs/HVDs before invoking this function.


Note
This function will check input parameters based on hardware restrictions before setting registers, if input parameters do not satisfy hardware restrictions the specific error will be reported.


Note
Some hardware restrictions not covered, application should be aware of this and follow this hardware restrictions otherwise some unkown issue may occur:

If Core LDO’s drive strength are set to same value in both Active mode and low power mode, the voltage level should also set to same value.
When switching Core LDO’s drive strength from low to normal, ensure the LDO_CORE high voltage level is set to same level that was set prior to switching to the LDO_CORE drive strength. Otherwise, if the LVDs are enabled, an unexpected LVD can occur.




Note
If this function can not satisfy some tricky settings, please invoke other APIs in low-level function group.


Parameters:

base – SPC peripheral base address. 
config – Pointer to spc_active_mode_regulators_config_t structure.


Return values:

kStatus_Success – Config regulators in Active power mode successful. 
kStatus_SPC_BandgapModeWrong – Based on input setting, bandgap can not be disabled. 
kStatus_SPC_Busy – The SPC instance is busy to execute any type of power mode transition. 
kStatus_SPC_CORELDOLowDriveStrengthIgnore – Any of LVDs/HVDs kept enabled before invoking this function. 
kStatus_SPC_SYSLDOOverDriveVoltageFail – Fail to regulator to Over Drive Voltage due to System VDD HVD is not disabled. 
kStatus_SPC_SYSLDOLowDriveStrengthIgnore – Any of LVDs/HVDs kept enabled before invoking this function. 
kStatus_SPC_CORELDOVoltageWrong – Core LDO and System LDO do not have same voltage level. 







static inline void SPC_EnableActiveModeAnalogModules(SPC_Type *base, uint32_t maskValue)

Enables analog modules in active mode. 

Parameters:

base – SPC peripheral base address. 
maskValue – The mask of analog modules to enable in active mode, should be the OR’ed value of spc_analog_module_control. 







static inline void SPC_DisableActiveModeAnalogModules(SPC_Type *base, uint32_t maskValue)

Disables analog modules in active mode. 

Parameters:

base – SPC peripheral base address. 
maskValue – The mask of analog modules to disable in active mode, should be the OR’ed value of spc_analog_module_control. 







static inline uint32_t SPC_GetActiveModeEnabledAnalogModules(SPC_Type *base)

Gets enabled analog modules that enabled in active mode. 

Parameters:

base – SPC peripheral base address.


Returns:
The mask of enabled analog modules that enabled in active mode. 






static inline spc_bandgap_mode_t SPC_GetLowPowerModeBandgapMode(SPC_Type *base)

Gets the Bandgap mode in Low Power mode. 

Parameters:

base – SPC peripheral base address. 


Returns:
Bandgap mode in the type of spc_bandgap_mode_t enumeration. 






static inline uint32_t SPC_GetLowPowerModeVoltageDetectStatus(SPC_Type *base)

Gets the status of all voltage detectors in Low Power mode. 

Parameters:

base – SPC peripheral base address. 


Returns:
The status of all voltage detectors in low power mode. 






static inline void SPC_EnableLowPowerModeLowPowerIREF(SPC_Type *base, bool enable)

Enables/Disables Low Power IREF in low power modes. 
This function enables/disables Low Power IREF. Low Power IREF can only get disabled in Deep power down mode. In other low power modes, the Low Power IREF is always enabled.

Parameters:

base – SPC peripheral base address. 
enable – Enable/Disable Low Power IREF. true - Enable Low Power IREF for Low Power modes. false - Disable Low Power IREF for Deep Power Down mode. 







status_t SPC_SetLowPowerModeBandgapmodeConfig(SPC_Type *base, spc_bandgap_mode_t mode)

Configs Bandgap mode in Low Power mode. 

Note
To disable Bandgap in Low-power mode:

Disable all LVD’s ad HVD’s in low power mode;
Disable Glitch detect in low power mode;
Configure LDO’s and DCDC to low drive strength in low power mode;
Disable bandgap in low power mode; Otherwise, the error status will be reported.




Note
Some other system resources(such as PLL, CMP) require bandgap to be enabled, to disable bandgap please take care of other system resources.


Parameters:

base – SPC peripheral base address. 
mode – The Bandgap mode be selected.


Return values:

kStatus_SPC_BandgapModeWrong – The bandgap mode setting in Low Power mode is wrong. 
kStatus_Success – Config Bandgap mode in Low Power power mode successful. 







static inline void SPC_EnableSRAMLdOLowPowerModeIREF(SPC_Type *base, bool enable)

Enables/disables SRAM_LDO deep power low power IREF. 

Parameters:

base – SPC peripheral base address. 
enable – Used to enable/disable low power IREF :

true: Low Power IREF is enabled ;
false: Low Power IREF is disabled for power saving. 









static inline void SPC_EnableLowPowerModeCMPBandgapBufferMode(SPC_Type *base, bool enable)

Enables/Disables CMP Bandgap Buffer. 
This function gates CMP bandgap buffer. CMP bandgap buffer is automatically disabled and turned off in Deep Power Down mode.


Deprecated:
No longer used, please use SPC_EnableLowPowerModeCMPBandgapBuffer as instead.




Parameters:

base – SPC peripheral base address. 
enable – Enable/Disable CMP Bandgap buffer. true - Enable Buffer Stored Reference Voltage to CMP. false - Disable Buffer Stored Reference Voltage to CMP. 







static inline void SPC_EnableLowPowerModeCMPBandgapBuffer(SPC_Type *base, bool enable)

Enables/Disables CMP Bandgap Buffer. 
This function gates CMP bandgap buffer. CMP bandgap buffer is automatically disabled and turned off in Deep Power Down mode.


Deprecated:
No longer used.




Parameters:

base – SPC peripheral base address. 
enable – Enable/Disable CMP Bandgap buffer. true - Enable Buffer Stored Reference Voltage to CMP. false - Disable Buffer Stored Reference Voltage to CMP. 







static inline void SPC_EnableLowPowerModeCoreVDDInternalVoltageScaling(SPC_Type *base, bool enable)

Enables/Disables CORE VDD IVS(Internal Voltage Scaling) in power down modes. 
This function gates CORE VDD IVS. When enabled, the IVS regulator will scale the external input CORE VDD to a lower voltage level to reduce internal leakage. IVS is invalid in Sleep or Deep power down mode.

Parameters:

base – SPC peripheral base address. 
enable – Enable/Disable IVS. true - enable CORE VDD IVS in Power Down mode. false - disable CORE VDD IVS in Power Down mode. 







static inline void SPC_SetLowPowerWakeUpDelay(SPC_Type *base, uint16_t delay)

Sets the delay when exit the low power modes. 

Parameters:

base – SPC peripheral base address. 
delay – The number of SPC timer clock cycles that the SPC waits on exit from low power modes. 







status_t SPC_SetLowPowerModeRegulatorsConfig(SPC_Type *base, const spc_lowpower_mode_regulators_config_t *config)

Configs all settings of regulators in Low power mode at a time. 

Note
This function is used to overwrite all settings of regulators(including bandgap mode, regulators’ drive strength and voltage level) in low power mode at a time.


Note
Enable/disable LVDs/HVDs before invoking this function.


Note
This function will check input parameters based on hardware restrictions before setting registers, if input parameters do not satisfy hardware restrictions the specific error will be reported.


Note
Some hardware restrictions not covered, application should be aware of this and follow this hardware restrictions otherwise some unkown issue may occur:

If Core LDO’s drive strength are set to same value in both Active mode and low power mode, the voltage level should also set to same value.
When switching Core LDO’s drive strength from low to normal, ensure the LDO_CORE high voltage level is set to same level that was set prior to switching to the LDO_CORE drive strength. Otherwise, if the LVDs are enabled, an unexpected LVD can occur.




Note
If this function can not satisfy some tricky settings, please invoke other APIs in low-level function group.


Parameters:

base – SPC peripheral base address. 
config – Pointer to spc_lowpower_mode_regulators_config_t structure. 


Return values:

kStatus_Success – Config regulators in Low power mode successful. 
kStatus_SPC_BandgapModeWrong – The bandgap should not be disabled based on input settings. 
kStatus_SPC_CORELDOLowDriveStrengthIgnore – Set driver strength to low will be ignored. 
kStatus_SPC_SYSLDOLowDriveStrengthIgnore – Set driver strength to low will be ignored. 
kStatus_SPC_CORELDOVoltageWrong – Core LDO and System LDO do not have same voltage level. 







static inline void SPC_EnableLowPowerModeAnalogModules(SPC_Type *base, uint32_t maskValue)

Enables analog modules in low power modes. 

Parameters:

base – SPC peripheral base address. 
maskValue – The mask of analog modules to enable in low power modes, should be OR’ed value of spc_analog_module_control. 







static inline void SPC_DisableLowPowerModeAnalogModules(SPC_Type *base, uint32_t maskValue)

Disables analog modules in low power modes. 

Parameters:

base – SPC peripheral base address. 
maskValue – The mask of analog modules to disable in low power modes, should be OR’ed value of spc_analog_module_control. 







static inline uint32_t SPC_GetLowPowerModeEnabledAnalogModules(SPC_Type *base)

Gets enabled analog modules that enabled in low power modes. 

Parameters:

base – SPC peripheral base address.


Returns:
The mask of enabled analog modules that enabled in low power modes. 






static inline uint32_t SPC_GetVoltageDetectStatusFlag(SPC_Type *base)

Get Voltage Detect Status Flags. 

Parameters:

base – SPC peripheral base address. 


Returns:
Voltage Detect Status Flags. See _spc_voltage_detect_flags for details. 






static inline void SPC_ClearVoltageDetectStatusFlag(SPC_Type *base, uint8_t mask)

Clear Voltage Detect Status Flags. 

Parameters:

base – SPC peripheral base address. 
mask – The mask of the voltage detect status flags. See _spc_voltage_detect_flags for details. 







void SPC_SetCoreVoltageDetectConfig(SPC_Type *base, const spc_core_voltage_detect_config_t *config)

Configs CORE voltage detect options. 

Note
: Setting both the voltage detect interrupt and reset enable will cause interrupt to be generated on exit from reset. If those conditioned is not desired, interrupt/reset so only one is enabled.


Parameters:

base – SPC peripheral base address. 
config – Pointer to spc_core_voltage_detect_config_t structure. 







static inline void SPC_LockCoreVoltageDetectResetSetting(SPC_Type *base)

Locks Core voltage detect reset setting. 
This function locks core voltage detect reset setting. After invoking this function any configuration of Core voltage detect reset will be ignored.

Parameters:

base – SPC peripheral base address. 







static inline void SPC_UnlockCoreVoltageDetectResetSetting(SPC_Type *base)

Unlocks Core voltage detect reset setting. 
This function unlocks core voltage detect reset setting. If locks the Core voltage detect reset setting, invoking this function to unlock.

Parameters:

base – SPC peripheral base address. 







status_t SPC_EnableActiveModeCoreLowVoltageDetect(SPC_Type *base, bool enable)

Enables/Disables the Core Low Voltage Detector in Active mode. 

Note
If the CORE_LDO low voltage detect is enabled in Active mode, please note that the bandgap must be enabled and the drive strength of each regulator must not set to low.


Parameters:

base – SPC peripheral base address. 
enable – Enable/Disable Core LVD. true - Enable Core Low voltage detector in active mode. false - Disable Core Low voltage detector in active mode.


Return values:
kStatus_Success – Enable/Disable Core Low Voltage Detect successfully. 






status_t SPC_EnableLowPowerModeCoreLowVoltageDetect(SPC_Type *base, bool enable)

Enables/Disables the Core Low Voltage Detector in Low Power mode. 
This function enables/disables the Core Low Voltage Detector. If enabled the Core Low Voltage detector. The Bandgap mode in low power mode must be programmed so that Bandgap is enabled.

Note
If the CORE_LDO low voltage detect is enabled in Low Power mode, please note that the bandgap must be enabled and the drive strength of each regulator must not set to low in Low Power mode.


Parameters:

base – SPC peripheral base address. 
enable – Enable/Disable Core HVD. true - Enable Core Low voltage detector in low power mode. false - Disable Core Low voltage detector in low power mode.


Return values:
kStatus_Success – Enable/Disable Core Low Voltage Detect in low power mode successfully. 






status_t SPC_EnableActiveModeCoreHighVoltageDetect(SPC_Type *base, bool enable)

Enables/Disables the Core High Voltage Detector in Active mode. 

Note
If the CORE_LDO high voltage detect is enabled in Active mode, please note that the bandgap must be enabled and the drive strength of each regulator must not set to low.


Parameters:

base – SPC peripheral base address. 
enable – Enable/Disable Core HVD. true - Enable Core High voltage detector in active mode. false - Disable Core High voltage detector in active mode.


Return values:
kStatus_Success – Enable/Disable Core High Voltage Detect successfully. 






status_t SPC_EnableLowPowerModeCoreHighVoltageDetect(SPC_Type *base, bool enable)

Enables/Disables the Core High Voltage Detector in Low Power mode. 
This function enables/disables the Core High Voltage Detector. If enabled the Core High Voltage detector. The Bandgap mode in low power mode must be programmed so that Bandgap is enabled.

Note
If the CORE_LDO high voltage detect is enabled in Low Power mode, please note that the bandgap must be enabled and the drive strength of each regulator must not set to low in low power mode.


Parameters:

base – SPC peripheral base address. 
enable – Enable/Disable Core HVD. true - Enable Core High voltage detector in low power mode. false - Disable Core High voltage detector in low power mode.


Return values:
kStatus_Success – Enable/Disable Core High Voltage Detect in low power mode successfully. 






void SPC_SetSystemVDDLowVoltageLevel(SPC_Type *base, spc_low_voltage_level_select_t level)

Set system VDD Low-voltage level selection. 
This function selects the system VDD low-voltage level. Changing system VDD low-voltage level must be done after disabling the System VDD low voltage reset and interrupt.


Deprecated:
In latest RM, reserved for all devices, will removed in next release.




Parameters:

base – SPC peripheral base address. 
level – System VDD Low-Voltage level selection. 







void SPC_SetSystemVoltageDetectConfig(SPC_Type *base, const spc_system_voltage_detect_config_t *config)

Configs SYS voltage detect options. 
This function config SYS voltage detect options. 

Note
: Setting both the voltage detect interrupt and reset enable will cause interrupt to be generated on exit from reset. If those conditioned is not desired, interrupt/reset so only one is enabled.


Parameters:

base – SPC peripheral base address. 
config – Pointer to spc_system_voltage_detect_config_t structure. 







static inline void SPC_LockSystemVoltageDetectResetSetting(SPC_Type *base)

Lock System voltage detect reset setting. 
This function locks system voltage detect reset setting. After invoking this function any configuration of System Voltage detect reset will be ignored.

Parameters:

base – SPC peripheral base address. 







static inline void SPC_UnlockSystemVoltageDetectResetSetting(SPC_Type *base)

Unlock System voltage detect reset setting. 
This function unlocks system voltage detect reset setting. If locks the System voltage detect reset setting, invoking this function to unlock.

Parameters:

base – SPC peripheral base address. 







status_t SPC_EnableActiveModeSystemHighVoltageDetect(SPC_Type *base, bool enable)

Enables/Disables the System High Voltage Detector in Active mode. 

Note
If the System_LDO high voltage detect is enabled in Active mode, please note that the bandgap must be enabled and the drive strength of each regulator must not set to low in Active mode.


Parameters:

base – SPC peripheral base address. 
enable – Enable/Disable System HVD. true - Enable System High voltage detector in active mode. false - Disable System High voltage detector in active mode.


Return values:
kStatus_Success – Enable/Disable System High Voltage Detect successfully. 






status_t SPC_EnableActiveModeSystemLowVoltageDetect(SPC_Type *base, bool enable)

Enables/Disable the System Low Voltage Detector in Active mode. 

Note
If the System_LDO low voltage detect is enabled in Active mode, please note that the bandgap must be enabled and the drive strength of each regulator must not set to low in Active mode.


Parameters:

base – SPC peripheral base address. 
enable – Enable/Disable System LVD. true - Enable System Low voltage detector in active mode. false - Disable System Low voltage detector in active mode.


Return values:
kStatus_Success – Enable/Disable the System Low Voltage Detect successfully. 






status_t SPC_EnableLowPowerModeSystemHighVoltageDetect(SPC_Type *base, bool enable)

Enables/Disables the System High Voltage Detector in Low Power mode. 

Note
If the System_LDO high voltage detect is enabled in Low Power mode, please note that the bandgap must be enabled and the drive strength of each regulator must not set to low in Low Power mode.


Parameters:

base – SPC peripheral base address. 
enable – Enable/Disable System HVD. true - Enable System High voltage detector in low power mode. false - Disable System High voltage detector in low power mode.


Return values:
kStatus_Success – Enable/Disable System High Voltage Detect in low power mode successfully. 






status_t SPC_EnableLowPowerModeSystemLowVoltageDetect(SPC_Type *base, bool enable)

Enables/Disables the System Low Voltage Detector in Low Power mode. 

Note
If the System_LDO low voltage detect is enabled in Low Power mode, please note that the bandgap must be enabled and the drive strength of each regulator must not set to low in Low Power mode.


Parameters:

base – SPC peripheral base address. 
enable – Enable/Disable System HVD. true - Enable System Low voltage detector in low power mode. false - Disable System Low voltage detector in low power mode.


Return values:
kStatus_Success – Enables System Low Voltage Detect in low power mode successfully. 






void SPC_SetIOVDDLowVoltageLevel(SPC_Type *base, spc_low_voltage_level_select_t level)

Set IO VDD Low-Voltage level selection. 
This function selects the IO VDD Low-voltage level. Changing IO VDD low-voltage level must be done after disabling the IO VDD low voltage reset and interrupt.

Parameters:

base – SPC peripheral base address. 
level – IO VDD Low-voltage level selection. 







void SPC_SetIOVoltageDetectConfig(SPC_Type *base, const spc_io_voltage_detect_config_t *config)

Configs IO voltage detect options. 
This function config IO voltage detect options. 

Note
: Setting both the voltage detect interrupt and reset enable will cause interrupt to be generated on exit from reset. If those conditioned is not desired, interrupt/reset so only one is enabled.


Parameters:

base – SPC peripheral base address. 
config – Pointer to spc_voltage_detect_config_t structure. 







static inline void SPC_LockIOVoltageDetectResetSetting(SPC_Type *base)

Lock IO Voltage detect reset setting. 
This function locks IO voltage detect reset setting. After invoking this function any configuration of system voltage detect reset will be ignored.

Parameters:

base – SPC peripheral base address. 







static inline void SPC_UnlockIOVoltageDetectResetSetting(SPC_Type *base)

Unlock IO voltage detect reset setting. 
This function unlocks IO voltage detect reset setting. If locks the IO voltage detect reset setting, invoking this function to unlock.

Parameters:

base – SPC peripheral base address. 







status_t SPC_EnableActiveModeIOHighVoltageDetect(SPC_Type *base, bool enable)

Enables/Disables the IO High Voltage Detector in Active mode. 

Note
If the IO high voltage detect is enabled in Active mode, please note that the bandgap must be enabled and the drive strength of each regulator must not set to low in Active mode.


Parameters:

base – SPC peripheral base address. 
enable – Enable/Disable IO HVD. true - Enable IO High voltage detector in active mode. false - Disable IO High voltage detector in active mode.


Return values:
kStatus_Success – Enable/Disable IO High Voltage Detect successfully. 






status_t SPC_EnableActiveModeIOLowVoltageDetect(SPC_Type *base, bool enable)

Enables/Disables the IO Low Voltage Detector in Active mode. 

Note
If the IO low voltage detect is enabled in Active mode, please note that the bandgap must be enabled and the drive strength of each regulator must not set to low in Active mode.


Parameters:

base – SPC peripheral base address. 
enable – Enable/Disable IO LVD. true - Enable IO Low voltage detector in active mode. false - Disable IO Low voltage detector in active mode.


Return values:
kStatus_Success – Enable IO Low Voltage Detect successfully. 






status_t SPC_EnableLowPowerModeIOHighVoltageDetect(SPC_Type *base, bool enable)

Enables/Disables the IO High Voltage Detector in Low Power mode. 

Note
If the IO high voltage detect is enabled in Low Power mode, please note that the bandgap must be enabled and the drive strength of each regulator must not set to low in Low Power mode.


Parameters:

base – SPC peripheral base address. 
enable – Enable/Disable IO HVD. true - Enable IO High voltage detector in low power mode. false - Disable IO High voltage detector in low power mode.


Return values:
kStatus_Success – Enable IO High Voltage Detect in low power mode successfully. 






status_t SPC_EnableLowPowerModeIOLowVoltageDetect(SPC_Type *base, bool enable)

Enables/Disables the IO Low Voltage Detector in Low Power mode. 

Note
If the IO low voltage detect is enabled in Low Power mode, please note that the bandgap must be enabled and the drive strength of each regulator must not set to low in Low Power mode.


Parameters:

base – SPC peripheral base address. 
enable – Enable/Disable IO LVD. true - Enable IO Low voltage detector in low power mode. false - Disable IO Low voltage detector in low power mode.


Return values:
kStatus_Success – Enable/Disable IO Low Voltage Detect in low power mode successfully. 






void SPC_SetExternalVoltageDomainsConfig(SPC_Type *base, uint8_t lowPowerIsoMask, uint8_t IsoMask)

Configs external voltage domains. 
This function configs external voltage domains isolation.

Parameters:

base – SPC peripheral base address. 
lowPowerIsoMask – The mask of external domains isolate enable during low power mode. Please read the Reference Manual for the Bitmap. 
IsoMask – The mask of external domains isolate. Please read the Reference Manual for the Bitmap. 







static inline uint8_t SPC_GetExternalDomainsStatus(SPC_Type *base)

Gets External Domains status. 

Parameters:

base – SPC peripheral base address. 


Returns:
The status of each external domain. 






static inline void SPC_EnableCoreLDORegulator(SPC_Type *base, bool enable)

Enable/Disable Core LDO regulator. 

Note
The CORE LDO enable bit is write-once.


Parameters:

base – SPC peripheral base address. 
enable – Enable/Disable CORE LDO Regulator. true - Enable CORE LDO Regulator. false - Disable CORE LDO Regulator. 







static inline void SPC_PullDownCoreLDORegulator(SPC_Type *base, bool pulldown)

Enable/Disable the CORE LDO Regulator pull down in Deep Power Down. 

Note
This function only useful when enabled the CORE LDO Regulator.


Parameters:

base – SPC peripheral base address. 
pulldown – Enable/Disable CORE LDO pulldown in Deep Power Down mode. true - CORE LDO Regulator will discharge in Deep Power Down mode. false - CORE LDO Regulator will not discharge in Deep Power Down mode. 







status_t SPC_SetActiveModeCoreLDORegulatorConfig(SPC_Type *base, const spc_active_mode_core_ldo_option_t *option)

Configs Core LDO Regulator in Active mode. 

Note
The bandgap must be enabled before invoking this function. 


Note
To set Core LDO as low drive strength, all HVDs/LVDs must be disabled previously.


Parameters:

base – SPC peripheral base address. 
option – Pointer to the spc_active_mode_core_ldo_option_t structure.


Return values:

kStatus_Success – Config Core LDO regulator in Active power mode successful. 
kStatus_SPC_Busy – The SPC instance is busy to execute any type of power mode transition. 
kStatus_SPC_BandgapModeWrong – Bandgap should be enabled before invoking this function. 
kStatus_SPC_CORELDOLowDriveStrengthIgnore – To set Core LDO as low drive strength, all LVDs/HVDs must be disabled before invoking this function. 







status_t SPC_SetActiveModeCoreLDORegulatorVoltageLevel(SPC_Type *base, spc_core_ldo_voltage_level_t voltageLevel)

Set Core LDO Regulator Voltage level in Active mode. 

Note
In active mode, the Core LDO voltage level should only be changed when the Core LDO is in normal drive strength.


Note
Update Core LDO voltage level will set Busy flag, this function return only when busy flag is cleared by hardware


Parameters:

base – SPC peripheral base address. 
voltageLevel – Specify the voltage level of CORE LDO Regulator in Active mode, please refer to spc_core_ldo_voltage_level_t.


Return values:

kStatus_SPC_CORELDOVoltageSetFail – The drive strength of Core LDO is not normal. 
kStatus_Success – Set Core LDO regulator voltage level in Active power mode successful. 







static inline spc_core_ldo_voltage_level_t SPC_GetActiveModeCoreLDOVDDVoltageLevel(SPC_Type *base)

Gets CORE LDO Regulator Voltage level. 
This function returns the voltage level of CORE LDO Regulator in Active mode.

Parameters:

base – SPC peripheral base address. 


Returns:
Voltage level of CORE LDO in type of spc_core_ldo_voltage_level_t enumeration. 






status_t SPC_SetActiveModeCoreLDORegulatorDriveStrength(SPC_Type *base, spc_core_ldo_drive_strength_t driveStrength)

Set Core LDO VDD Regulator Drive Strength in Active mode. 

Parameters:

base – SPC peripheral base address. 
driveStrength – Specify the drive strength of CORE LDO Regulator in Active mode, please refer to spc_core_ldo_drive_strength_t.


Return values:

kStatus_Success – Set Core LDO regulator drive strength in Active power mode successful. 
kStatus_SPC_CORELDOLowDriveStrengthIgnore – If any voltage detect enabled, core_ldo’s drive strength can not set to low. 
kStatus_SPC_BandgapModeWrong – The selected bandgap mode is not allowed. 







static inline spc_core_ldo_drive_strength_t SPC_GetActiveModeCoreLDODriveStrength(SPC_Type *base)

Gets CORE LDO VDD Regulator Drive Strength in Active mode. 

Parameters:

base – SPC peripheral base address. 


Returns:
Drive Strength of CORE LDO regulator in Active mode, please refer to spc_core_ldo_drive_strength_t. 






status_t SPC_SetLowPowerModeCoreLDORegulatorConfig(SPC_Type *base, const spc_lowpower_mode_core_ldo_option_t *option)

Configs CORE LDO Regulator in low power mode. 
This function configs CORE LDO Regulator in Low Power mode. If CORE LDO VDD Drive Strength is set to Normal, the CORE LDO VDD regulator voltage level in Active mode must be equal to the voltage level in Low power mode. And the Bandgap must be programmed to select bandgap enabled. Core VDD voltage levels for the Core LDO low power regulator can only be changed when the CORE LDO Drive Strength set as Normal.

Parameters:

base – SPC peripheral base address. 
option – Pointer to the spc_lowpower_mode_core_ldo_option_t structure.


Return values:

kStatus_Success – Config Core LDO regulator in power mode successfully. 
kStatus_SPC_Busy – The SPC instance is busy to execute any type of power mode transition. 
kStatus_SPC_CORELDOLowDriveStrengthIgnore – Set driver strength to low will be ignored. 
#kStatus_SPC_CORELDOVoltageSetFail. – Fail to change Core LDO voltage level. 







status_t SPC_SetLowPowerModeCoreLDORegulatorVoltageLevel(SPC_Type *base, spc_core_ldo_voltage_level_t voltageLevel)

Set Core LDO VDD Regulator Voltage level in Low power mode. 

Note
If CORE LDO’s drive strength is set to Normal, the CORE LDO VDD regulator voltage in active mode and low power mode must be same. 


Note
Voltage level for the CORE LDO in low power mode can only be changed when the CORE LDO Drive Strength set as Normal.


Parameters:

base – SPC peripheral base address. 
voltageLevel – Voltage level of CORE LDO Regulator in Low power mode, please refer to spc_core_ldo_voltage_level_t.


Return values:

kStatus_SPC_CORELDOVoltageWrong – Voltage level in active mode and low power mode is not same. 
kStatus_Success – Set Core LDO regulator voltage level in Low power mode successful. 
kStatus_SPC_CORELDOVoltageSetFail – Fail to update voltage level because drive strength is incorrect. 







static inline spc_core_ldo_voltage_level_t SPC_GetLowPowerCoreLDOVDDVoltageLevel(SPC_Type *base)

Gets the CORE LDO VDD Regulator Voltage Level for Low Power modes. 

Parameters:

base – SPC peripheral base address. 


Returns:
The CORE LDO VDD Regulator’s voltage level. 






status_t SPC_SetLowPowerModeCoreLDORegulatorDriveStrength(SPC_Type *base, spc_core_ldo_drive_strength_t driveStrength)

Set Core LDO VDD Regulator Drive Strength in Low power mode. 

Parameters:

base – SPC peripheral base address. 
driveStrength – Specify drive strength of CORE LDO in low power mode.


Return values:

kStatus_SPC_CORELDOLowDriveStrengthIgnore – Some voltage detect enabled, CORE LDO’s drive strength can not set as low. 
kStatus_Success – Set Core LDO regulator drive strength in Low power mode successful. 
kStatus_SPC_BandgapModeWrong – Bandgap is disabled when attempt to set CORE LDO work as normal drive strength. 







static inline spc_core_ldo_drive_strength_t SPC_GetLowPowerCoreLDOVDDDriveStrength(SPC_Type *base)

Gets CORE LDO VDD Drive Strength for Low Power modes. 

Parameters:

base – SPC peripheral base address. 


Returns:
The CORE LDO’s VDD Drive Strength. 






static inline void SPC_EnableSystemLDORegulator(SPC_Type *base, bool enable)

Enable/Disable System LDO regulator. 

Note
The SYSTEM LDO enable bit is write-once.


Parameters:

base – SPC peripheral base address. 
enable – Enable/Disable System LDO Regulator. true - Enable System LDO Regulator. false - Disable System LDO Regulator. 







static inline void SPC_EnableSystemLDOSinkFeature(SPC_Type *base, bool sink)

Enable/Disable current sink feature of System LDO Regulator. 

Parameters:

base – SPC peripheral base address. 
sink – Enable/Disable current sink feature. true - Enable current sink feature of System LDO Regulator. false - Disable current sink feature of System LDO Regulator. 







status_t SPC_SetActiveModeSystemLDORegulatorConfig(SPC_Type *base, const spc_active_mode_sys_ldo_option_t *option)

Configs System LDO VDD Regulator in Active mode. 

Note
If System LDO VDD Drive Strength is set to Normal, the Bandgap mode in Active mode must be programmed to a value that enables the bandgap. 


Note
If any voltage detects are kept enabled, configuration to set System LDO VDD drive strength to low will be ignored. 


Note
If select System LDO VDD Regulator voltage level to Over Drive Voltage, the Drive Strength of System LDO VDD Regulator must be set to Normal otherwise the regulator Drive Strength will be forced to Normal. 


Note
If select System LDO VDD Regulator voltage level to Over Drive Voltage, the High voltage detect must be disabled. Otherwise it will be fail to regulator to Over Drive Voltage.


Parameters:

base – SPC peripheral base address. 
option – Pointer to the spc_active_mode_sys_ldo_option_t structure.


Return values:

kStatus_Success – Config System LDO regulator in Active power mode successful. 
kStatus_SPC_Busy – The SPC instance is busy to execute any type of power mode transition. 
kStatus_SPC_BandgapModeWrong – The bandgap is not enabled before invoking this function. 
kStatus_SPC_SYSLDOOverDriveVoltageFail – HVD of System VDD is not disable before setting to Over Drive voltage. 
kStatus_SPC_SYSLDOLowDriveStrengthIgnore – Set System LDO VDD regulator’s driver strength to Low will be ignored. 







status_t SPC_SetActiveModeSystemLDORegulatorVoltageLevel(SPC_Type *base, spc_sys_ldo_voltage_level_t voltageLevel)

Set System LDO Regulator voltage level in Active mode. 

Note
The system LDO regulator can only operate at the overdrive voltage level for a limited amount of time for the life of chip.


Parameters:

base – SPC peripheral base address. 
voltageLevel – Specify the voltage level of System LDO Regulator in Active mode.


Return values:

kStatus_Success – Set System LDO Regulator voltage level in Active mode successfully. 
kStatus_SPC_SYSLDOOverDriveVoltageFail – Must disable system LDO high voltage detector before specifing overdrive voltage. 







static inline spc_sys_ldo_voltage_level_t SPC_GetActiveModeSystemLDORegulatorVoltageLevel(SPC_Type *base)

Get System LDO Regulator voltage level in Active mode. 

Parameters:

base – SPC peripheral base address. 


Returns:
System LDO Regulator voltage level in Active mode, please refer to spc_sys_ldo_voltage_level_t. 






status_t SPC_SetActiveModeSystemLDORegulatorDriveStrength(SPC_Type *base, spc_sys_ldo_drive_strength_t driveStrength)

Set System LDO Regulator Drive Strength in Active mode. 

Parameters:

base – SPC peripheral base address. 
driveStrength – Specify the drive strength of System LDO Regulator in Active mode.


Return values:

kStatus_Success – Set System LDO Regulator drive strength in Active mode successfully. 
kStatus_SPC_SYSLDOLowDriveStrengthIgnore – Attempt to specify low drive strength is ignored due to any voltage detect feature is enabled in active mode. 
kStatus_SPC_BandgapModeWrong – Bandgap mode in Active mode must be programmed to a value that enables the bandgap if attempt to specify normal drive strength. 







static inline spc_sys_ldo_drive_strength_t SPC_GetActiveModeSystemLDORegulatorDriveStrength(SPC_Type *base)

Get System LDO Regulator Drive Strength in Active mode. 

Parameters:

base – SPC peripheral base address. 


Returns:
System LDO regulator drive strength in Active mode, please refer to spc_sys_ldo_drive_strength_t. 






status_t SPC_SetLowPowerModeSystemLDORegulatorConfig(SPC_Type *base, const spc_lowpower_mode_sys_ldo_option_t *option)

Configs System LDO regulator in low power modes. 
This function configs System LDO regulator in low power modes. If System LDO VDD Regulator Drive strength is set to normal, bandgap mode in low power mode must be programmed to a value that enables the Bandgap. If any High voltage detectors or Low Voltage detectors are kept enabled, configuration to set System LDO Regulator drive strength as Low will be ignored.

Parameters:

base – SPC peripheral base address. 
option – Pointer to spc_lowpower_mode_sys_ldo_option_t structure.


Return values:

kStatus_Success – Config System LDO regulator in Low Power Mode successfully. 
kStatus_SPC_Busy – The SPC instance is busy to execute any type of power mode transition. 
kStatus_SPC_SYSLDOLowDriveStrengthIgnore – Set driver strength to low will be ignored. 







status_t SPC_SetLowPowerModeSystemLDORegulatorDriveStrength(SPC_Type *base, spc_sys_ldo_drive_strength_t driveStrength)

Set System LDO Regulator drive strength in Low Power Mode. 

Parameters:

base – SPC peripheral base address. 
driveStrength – Specify the drive strength of System LDO Regulator in Low Power Mode.


Return values:

kStatus_Success – Set System LDO Regulator drive strength in Low Power Mode successfully. 
kStatus_SPC_SYSLDOLowDriveStrengthIgnore – Attempt to specify low drive strength is ignored due to any voltage detect feature is enabled in low power mode. 
kStatus_SPC_BandgapModeWrong – Bandgap mode in low power mode must be programmed to a value that enables the bandgap if attempt to specify normal drive strength. 







static inline spc_sys_ldo_drive_strength_t SPC_GetLowPowerModeSystemLDORegulatorDriveStrength(SPC_Type *base)

Get System LDO Regulator drive strength in Low Power Mode. 

Parameters:

base – SPC peripheral base address. 


Returns:
System LDO regulator drive strength in Low Power Mode, please refer to spc_sys_ldo_drive_strength_t. 






static inline void SPC_EnableDCDCRegulator(SPC_Type *base, bool enable)

Enable/Disable DCDC Regulator. 

Note
The DCDC enable bit is write-once, settings only reset after a POR, LVD, or HVD event.


Parameters:

base – SPC peripheral base address. 
enable – Enable/Disable DCDC Regulator. true - Enable DCDC Regulator. false - Disable DCDC Regulator. 







void SPC_SetDCDCBurstConfig(SPC_Type *base, spc_dcdc_burst_config_t *config)

Config DCDC Burst options. 

Parameters:

base – SPC peripheral base address. 
config – Pointer to spc_dcdc_burst_config_t structure. 







static inline void SPC_TriggerDCDCBurstRequest(SPC_Type *base)

Trigger a software burst request to DCDC. 

Parameters:

base – SPC peripheral base address. 







static inline bool SPC_CheckDCDCBurstAck(SPC_Type *base)

Check if burst acknowlege flag is asserted. 

Parameters:

base – SPC peripheral base address.


Return values:

false – DCDC burst not complete. 
true – DCDC burst complete. 







static inline void SPC_ClearDCDCBurstAckFlag(SPC_Type *base)

Clear DCDC busrt acknowledge flag. 

Parameters:

base – SPC periphral base address. 







void SPC_SetDCDCRefreshCount(SPC_Type *base, uint16_t count)

Set the count value of the reference clock to configure the period of DCDC not active. 

Note
This function is only useful when DCDC’s drive strength is set as pulse refresh. 


Note
The pulse duration(time between on and off) is: reference clock period * (count + 2).


Parameters:

base – SPC peripheral base address. 
count – The count value, 16 bit width. 







static inline void SPC_EnableDCDCBleedResistor(SPC_Type *base, bool enable)

Enable a bleed resistor to discharge DCDC output when DCDC is disabled. 

Parameters:

base – SPC peripheral base address. 
enable – Used to enable/disable bleed resistor. 







status_t SPC_SetActiveModeDCDCRegulatorConfig(SPC_Type *base, const spc_active_mode_dcdc_option_t *option)

Configs DCDC_CORE Regulator in Active mode. 

Note
When changing the DCDC output voltage level, take care to change the CORE LDO voltage level.


Parameters:

base – SPC peripheral base address. 
option – Pointer to the spc_active_mode_dcdc_option_t structure.


Return values:

kStatus_Success – Config DCDC regulator in Active power mode successful. 
kStatus_SPC_Busy – The SPC instance is busy to execute any type of power mode transition. 
kStatus_SPC_BandgapModeWrong – Set DCDC_CORE Regulator drive strength to Normal, the Bandgap must be enabled. 







static inline void SPC_SetActiveModeDCDCRegulatorVoltageLevel(SPC_Type *base, spc_dcdc_voltage_level_t voltageLevel)

Set DCDC_CORE Regulator voltage level in Active mode. 

Note
When changing the DCDC output voltage level, take care to change the CORE LDO voltage level.


Parameters:

base – SPC peripheral base address. 
voltageLevel – Specify the DCDC_CORE Regulator voltage level, please refer to spc_dcdc_voltage_level_t. 







static inline spc_dcdc_voltage_level_t SPC_GetActiveModeDCDCRegulatorVoltageLevel(SPC_Type *base)

Get DCDC_CORE Regulator voltage level in Active mode. 

Parameters:

base – SPC peripheral base address. 


Returns:
DCDC_CORE Regulator voltage level, please refer to spc_dcdc_voltage_level_t. 






status_t SPC_SetActiveModeDCDCRegulatorDriveStrength(SPC_Type *base, spc_dcdc_drive_strength_t driveStrength)

Set DCDC_CORE Regulator drive strength in Active mode. 

Note
To set DCDC drive strength as Normal, the bandgap must be enabled.


Parameters:

base – SPC peripheral base address. 
driveStrength – Specify the DCDC_CORE regulator drive strength, please refer to spc_dcdc_drive_strength_t.


Return values:

kStatus_Success – Set DCDC_CORE Regulator drive strength in Active mode successfully. 
kStatus_SPC_BandgapModeWrong – Set DCDC_CORE Regulator drive strength to Normal, the Bandgap must be enabled. 







static inline spc_dcdc_drive_strength_t SPC_GetActiveModeDCDCRegulatorDriveStrength(SPC_Type *base)

Get DCDC_CORE Regulator drive strength in Active mode. 

Parameters:

base – SPC peripheral base address. 


Returns:
DCDC_CORE Regulator drive strength, please refer to spc_dcdc_drive_strength_t. 






status_t SPC_SetLowPowerModeDCDCRegulatorConfig(SPC_Type *base, const spc_lowpower_mode_dcdc_option_t *option)

Configs DCDC_CORE Regulator in Low power modes. 

Note
If DCDC_CORE Drive Strength is set to Normal, the Bandgap mode in Low Power mode must be programmed to a value that enables the Bandgap. 


Note
In Deep Power Down mode, DCDC regulator is always turned off.


Parameters:

base – SPC peripheral base address. 
option – Pointer to the spc_lowpower_mode_dcdc_option_t structure.


Return values:

kStatus_Success – Config DCDC regulator in low power mode successfully. 
kStatus_SPC_Busy – The SPC instance is busy to execute any type of power mode transition. 
kStatus_SPC_BandgapModeWrong – The bandgap mode setting in Low Power mode is wrong. 







status_t SPC_SetLowPowerModeDCDCRegulatorDriveStrength(SPC_Type *base, spc_dcdc_drive_strength_t driveStrength)

Set DCDC_CORE Regulator drive strength in Low power mode. 

Note
To set drive strength as normal, the bandgap must be enabled.


Parameters:

base – SPC peripheral base address. 
driveStrength – Specify the DCDC_CORE Regulator drive strength, please refer to spc_dcdc_drive_strength_t.


Return values:

kStatus_Success – Set DCDC_CORE Regulator drive strength in Low power mode successfully. 
kStatus_SPC_BandgapModeWrong – Set DCDC_CORE Regulator drive strength to Normal, the Bandgap must be enabled. 







static inline spc_dcdc_drive_strength_t SPC_GetLowPowerModeDCDCRegulatorDriveStrength(SPC_Type *base)

Get DCDC_CORE Regulator drive strength in Low power mode. 

Parameters:

base – SPC peripheral base address. 


Returns:
DCDC_CORE Regulator drive strength, please refer to spc_dcdc_drive_strength_t. 






static inline void SPC_SetLowPowerModeDCDCRegulatorVoltageLevel(SPC_Type *base, spc_dcdc_voltage_level_t voltageLevel)

Set DCDC_CORE Regulator voltage level in Low power mode. 

Configure ACTIVE_CFG[DCDC_VDD_LVL] to same level programmed in #1.



Note
To change DCDC level in Low-Power mode:

Configure LP_CFG[DCDC_VDD_LVL] to desired level;
Configure LP_CFG[DCDC_VDD_DS] to low driver strength;




Note
After invoking this function, the voltage level in active mode(wakeup from low power modes) also changed, if it is necessary, please invoke SPC_SetActiveModeDCDCRegulatorVoltageLevel() to change to desried voltage level.


Parameters:

base – SPC peripheral base address. 
voltageLevel – Specify the DCDC_CORE Regulator voltage level, please refer to spc_dcdc_voltage_level_t. 







static inline spc_dcdc_voltage_level_t SPC_GetLowPowerModeDCDCRegulatorVoltageLevel(SPC_Type *base)

Get DCDC_CORE Regulator voltage level in Low power mode. 

Parameters:

base – SPC peripheral base address. 


Returns:
DCDC_CORE Regulator voltage level, please refer to spc_dcdc_voltage_level_t. 






FSL_SPC_DRIVER_VERSION

SPC driver version 2.12.0. 





SPC status enumeration. 

Note
Some device(such as MCXA family) do not equip DCDC or System LDO, please refer to the reference manual to check. 

Values:


enumerator kStatus_SPC_Busy

The SPC instance is busy executing any type of power mode transition. 




enumerator kStatus_SPC_DCDCLowDriveStrengthIgnore

DCDC Low drive strength setting be ignored for LVD/HVD enabled. 




enumerator kStatus_SPC_DCDCPulseRefreshModeIgnore

DCDC Pulse Refresh Mode drive strength setting be ignored for LVD/HVD enabled. 




enumerator kStatus_SPC_SYSLDOOverDriveVoltageFail

SYS LDO regulate to Over drive voltage failed for SYS LDO HVD must be disabled. 




enumerator kStatus_SPC_SYSLDOLowDriveStrengthIgnore

SYS LDO Low driver strength setting be ignored for LDO LVD/HVD enabled. 




enumerator kStatus_SPC_CORELDOLowDriveStrengthIgnore

CORE LDO Low driver strength setting be ignored for LDO LVD/HVD enabled. 




enumerator kStatus_SPC_BandgapModeWrong

Selected Bandgap Mode wrong. 




enumerator kStatus_SPC_CORELDOVoltageWrong

Core LDO voltage is wrong. 




enumerator kStatus_SPC_CORELDOVoltageSetFail

Core LDO voltage set fail. 




enumerator kStatus_SPC_CORELDOVoltageDetectWrong

Settings of CORE_LDO voltage detection is not allowed. 




enumerator kStatus_SPC_DCDCCoreLdoVoltageMisMatch

Target voltage level of DCDC not equal to CORE_LDO. 






enum _spc_voltage_detect_flags

Voltage Detect Status Flags. 
Values:


enumerator kSPC_IOVDDHighVoltageDetectFlag

IO VDD High-Voltage detect flag. 




enumerator kSPC_IOVDDLowVoltageDetectFlag

IO VDD Low-Voltage detect flag. 




enumerator kSPC_SystemVDDHighVoltageDetectFlag

System VDD High-Voltage detect flag. 




enumerator kSPC_SystemVDDLowVoltageDetectFlag

System VDD Low-Voltage detect flag. 




enumerator kSPC_CoreVDDHighVoltageDetectFlag

Core VDD High-Voltage detect flag. 




enumerator kSPC_CoreVDDLowVoltageDetectFlag

Core VDD Low-Voltage detect flag. 






enum _spc_power_domains

SPC power domain isolation status. 

Note
Some devices(such as MCXA family) do not contain WAKE Power Domain, please refer to the reference manual to check. 

Values:


enumerator kSPC_MAINPowerDomainRetain

Peripherals and IO pads retain in MAIN Power Domain. 




enumerator kSPC_WAKEPowerDomainRetain

Peripherals and IO pads retain in WAKE Power Domain. 






enum _spc_analog_module_control

The enumeration of all analog module that can be controlled by SPC in active or low-power modes. 

Note
Enumerations may not suitable for all devices, please check the specific device’s RM for supported analog modules. 

Values:


enumerator kSPC_controlVref

Enable/disable VREF in active or low-power modes. 




enumerator kSPC_controlUsb3vDet

Enable/disable USB3V_Det in active or low-power modes. 




enumerator kSPC_controlVbat

Enable/disable VBAT in active or low-power modes. 




enumerator kSPC_controlDac0

Enable/disable DAC0 in active or low-power modes. 




enumerator kSPC_controlDac1

Enable/disable DAC1 in active or low-power modes. 




enumerator kSPC_controlDac2

Enable/disable DAC2 in active or low-power modes. 




enumerator kSPC_controlOpamp0

Enable/disable OPAMP0 in active or low-power modes. 




enumerator kSPC_controlOpamp1

Enable/disable OPAMP1 in active or low-power modes. 




enumerator kSPC_controlOpamp2

Enable/disable OPAMP2 in active or low-power modes. 




enumerator kSPC_controlOpamp3

Enable/disable OPAMP3 in active or low-power modes. 




enumerator kSPC_controlTsi0

Enable/disable TSI0 in active or low-power modes. 




enumerator kSPC_controlCmp0

Enable/disable CMP0 in active or low-power modes. 




enumerator kSPC_controlCmp1

Enable/disable CMP1 in active or low-power modes. 




enumerator kSPC_controlCmp2

Enable/disable CMP2 in active or low-power modes. 




enumerator kSPC_controlCmp0Dac

Enable/disable CMP0_DAC in active or low-power modes. 




enumerator kSPC_controlCmp1Dac

Enable/disable CMP1_DAC in active or low-power modes. 




enumerator kSPC_controlCmp2Dac

Enable/disable CMP2_DAC in active or low-power modes. 




enumerator kSPC_controlAllModules

Enable/disable all modules in active or low-power modes. 






enum _spc_power_domain_id

The enumeration of spc power domain, the connected power domain is chip specfic, please refer to chip’s RM for details. 
Values:


enumerator kSPC_PowerDomain0

Power domain0, the connected power domain is chip specific. 




enumerator kSPC_PowerDomain1

Power domain1, the connected power domain is chip specific. 






enum _spc_power_domain_low_power_mode

The enumeration of Power domain’s low power mode. 
Values:


enumerator kSPC_SleepWithSYSClockRunning

Power domain request SLEEP mode with SYS clock running. 




enumerator kSPC_DeepSleepWithSysClockOff

Power domain request deep sleep mode with system clock off. 




enumerator kSPC_PowerDownWithSysClockOff

Power domain request power down mode with system clock off. 




enumerator kSPC_DeepPowerDownWithSysClockOff

Power domain request deep power down mode with system clock off. 






enum _spc_lowPower_request_pin_polarity

SPC low power request output pin polarity. 
Values:


enumerator kSPC_HighTruePolarity

Control the High Polarity of the Low Power Reqest Pin. 




enumerator kSPC_LowTruePolarity

Control the Low Polarity of the Low Power Reqest Pin. 






enum _spc_lowPower_request_output_override

SPC low power request output override. 
Values:


enumerator kSPC_LowPowerRequestNotForced

Not Forced. 




enumerator kSPC_LowPowerRequestReserved

Reserved. 




enumerator kSPC_LowPowerRequestForcedLow

Forced Low (Ignore LowPower request output polarity setting.) 




enumerator kSPC_LowPowerRequestForcedHigh

Forced High (Ignore LowPower request output polarity setting.) 






enum _spc_bandgap_mode

SPC Bandgap mode enumeration in Active mode or Low Power mode. 
Values:


enumerator kSPC_BandgapDisabled

Bandgap disabled. 




enumerator kSPC_BandgapEnabledBufferDisabled

Bandgap enabled with Buffer disabled. 




enumerator kSPC_BandgapEnabledBufferEnabled

Bandgap enabled with Buffer enabled. 




enumerator kSPC_BandgapReserved

Reserved. 






enum _spc_dcdc_voltage_level

DCDC regulator voltage level enumeration in Active mode or Low Power Mode. 

Note
kSPC_DCDC_RetentionVoltage not supported for all power modes. 

Values:


enumerator kSPC_DCDC_RetentionVoltage

DCDC_CORE Regulator regulate to retention Voltage(Only supportedin low power modes) 




enumerator kSPC_DCDC_MidVoltage

DCDC_CORE Regulator regulate to Mid Voltage(1.0V). 




enumerator kSPC_DCDC_NormalVoltage

DCDC_CORE Regulator regulate to Normal Voltage(1.1V). 




enumerator kSPC_DCDC_OverdriveVoltage

DCDC_CORE Regulator regulate to Safe-Mode Voltage(1.2V). 






enum _spc_dcdc_drive_strength

DCDC regulator Drive Strength enumeration in Active mode or Low Power Mode. 

Note
Different drive strength differ in these DCDC characterstics: Maximum load current Quiescent current Transient response. 

Values:


enumerator kSPC_DCDC_PulseRefreshMode

DCDC_CORE Regulator Drive Strength set to Pulse Refresh Mode, This enum member is only useful for Low Power Mode config, please note that pluse refresh mode is invalid in SLEEP mode. 




enumerator kSPC_DCDC_LowDriveStrength

DCDC_CORE regulator Drive Strength set to low. 




enumerator kSPC_DCDC_NormalDriveStrength

DCDC_CORE regulator Drive Strength set to Normal. 






enum _spc_sys_ldo_voltage_level

SYS LDO regulator voltage level enumeration in Active mode. 
Values:


enumerator kSPC_SysLDO_NormalVoltage

SYS LDO VDD Regulator regulate to Normal Voltage(1.8V). 




enumerator kSPC_SysLDO_OverDriveVoltage

SYS LDO VDD Regulator regulate to Over Drive Voltage(2.5V). 






enum _spc_sys_ldo_drive_strength

SYS LDO regulator Drive Strength enumeration in Active mode or Low Power mode. 
Values:


enumerator kSPC_SysLDO_LowDriveStrength

SYS LDO VDD regulator Drive Strength set to low. 




enumerator kSPC_SysLDO_NormalDriveStrength

SYS LDO VDD regulator Drive Strength set to Normal. 






enum _spc_core_ldo_voltage_level

Core LDO regulator voltage level enumeration in Active mode or Low Power mode. 
Values:


enumerator kSPC_CoreLDO_UnderDriveVoltage



Deprecated:
, to align with description of latest RM, please use kSPC_Core_LDO_RetentionVoltage as instead. 







enumerator kSPC_Core_LDO_RetentionVoltage

Core LDO VDD regulator regulate to retention voltage, please note that only useful in low power modes and not all devices support this options please refer to devices’ RM for details. 




enumerator kSPC_CoreLDO_MidDriveVoltage

Core LDO VDD regulator regulate to Mid Drive Voltage. 




enumerator kSPC_CoreLDO_NormalVoltage

Core LDO VDD regulator regulate to Normal Voltage. 




enumerator kSPC_CoreLDO_OverDriveVoltage

Core LDO VDD regulator regulate to overdrive Voltage. 






enum _spc_core_ldo_drive_strength

CORE LDO VDD regulator Drive Strength enumeration in Low Power mode. 
Values:


enumerator kSPC_CoreLDO_LowDriveStrength

Core LDO VDD regulator Drive Strength set to low. 




enumerator kSPC_CoreLDO_NormalDriveStrength

Core LDO VDD regulator Drive Strength set to Normal. 






enum _spc_low_voltage_level_select

IO VDD Low-Voltage Level Select. 
Values:


enumerator kSPC_LowVoltageNormalLevel



Deprecated:
, please use kSPC_LowVoltageHighRange as instead. 







enumerator kSPC_LowVoltageSafeLevel



Deprecated:
, please use kSPC_LowVoltageLowRange as instead. 







enumerator kSPC_LowVoltageHighRange

High range LVD threshold. 




enumerator kSPC_LowVoltageLowRange

Low range LVD threshold. 






enum _spc_sram_operate_voltage

The list of the operating voltage for the SRAM’s read/write timing margin. 
Values:


enumerator kSPC_sramOperateAt1P0V

SRAM configured for 1.0V operation. 




enumerator kSPC_sramOperateAt1P1V

SRAM configured for 1.1V operation. 




enumerator kSPC_sramOperateAt1P2V

SRAM configured for 1.2V operation. 






typedef enum _spc_power_domain_id spc_power_domain_id_t

The enumeration of spc power domain, the connected power domain is chip specfic, please refer to chip’s RM for details. 




typedef enum _spc_power_domain_low_power_mode spc_power_domain_low_power_mode_t

The enumeration of Power domain’s low power mode. 




typedef enum _spc_lowPower_request_pin_polarity spc_lowpower_request_pin_polarity_t

SPC low power request output pin polarity. 




typedef enum _spc_lowPower_request_output_override spc_lowpower_request_output_override_t

SPC low power request output override. 




typedef enum _spc_bandgap_mode spc_bandgap_mode_t

SPC Bandgap mode enumeration in Active mode or Low Power mode. 




typedef enum _spc_dcdc_voltage_level spc_dcdc_voltage_level_t

DCDC regulator voltage level enumeration in Active mode or Low Power Mode. 

Note
kSPC_DCDC_RetentionVoltage not supported for all power modes. 





typedef enum _spc_dcdc_drive_strength spc_dcdc_drive_strength_t

DCDC regulator Drive Strength enumeration in Active mode or Low Power Mode. 

Note
Different drive strength differ in these DCDC characterstics: Maximum load current Quiescent current Transient response. 





typedef enum _spc_sys_ldo_voltage_level spc_sys_ldo_voltage_level_t

SYS LDO regulator voltage level enumeration in Active mode. 




typedef enum _spc_sys_ldo_drive_strength spc_sys_ldo_drive_strength_t

SYS LDO regulator Drive Strength enumeration in Active mode or Low Power mode. 




typedef enum _spc_core_ldo_voltage_level spc_core_ldo_voltage_level_t

Core LDO regulator voltage level enumeration in Active mode or Low Power mode. 




typedef enum _spc_core_ldo_drive_strength spc_core_ldo_drive_strength_t

CORE LDO VDD regulator Drive Strength enumeration in Low Power mode. 




typedef enum _spc_low_voltage_level_select spc_low_voltage_level_select_t

IO VDD Low-Voltage Level Select. 




typedef enum _spc_sram_operate_voltage spc_sram_operate_voltage_t

The list of the operating voltage for the SRAM’s read/write timing margin. 




typedef struct _spc_sram_voltage_config spc_sram_voltage_config_t





typedef struct _spc_lowpower_request_config spc_lowpower_request_config_t

Low Power Request output pin configuration. 




typedef struct _spc_active_mode_core_ldo_option spc_active_mode_core_ldo_option_t

Core LDO regulator options in Active mode. 




typedef struct _spc_active_mode_sys_ldo_option spc_active_mode_sys_ldo_option_t

System LDO regulator options in Active mode. 




typedef struct _spc_active_mode_dcdc_option spc_active_mode_dcdc_option_t

DCDC regulator options in Active mode. 




typedef struct _spc_lowpower_mode_core_ldo_option spc_lowpower_mode_core_ldo_option_t

Core LDO regulator options in Low Power mode. 




typedef struct _spc_lowpower_mode_sys_ldo_option spc_lowpower_mode_sys_ldo_option_t

System LDO regulator options in Low Power mode. 




typedef struct _spc_lowpower_mode_dcdc_option spc_lowpower_mode_dcdc_option_t

DCDC regulator options in Low Power mode. 




typedef struct _spc_dcdc_burst_config spc_dcdc_burst_config_t

DCDC Burst configuration. 


Deprecated:
Do not recommend to use this structure. 







typedef struct _spc_voltage_detect_option spc_voltage_detect_option_t

CORE/SYS/IO VDD Voltage Detect options. 




typedef struct _spc_core_voltage_detect_config spc_core_voltage_detect_config_t

Core Voltage Detect configuration. 




typedef struct _spc_system_voltage_detect_config spc_system_voltage_detect_config_t

System Voltage Detect Configuration. 




typedef struct _spc_io_voltage_detect_config spc_io_voltage_detect_config_t

IO Voltage Detect Configuration. 




typedef struct _spc_active_mode_regulators_config spc_active_mode_regulators_config_t

Active mode configuration. 




typedef struct _spc_lowpower_mode_regulators_config spc_lowpower_mode_regulators_config_t

Low Power Mode configuration. 




SPC_EVD_CFG_REG_EVDISO_SHIFT





SPC_EVD_CFG_REG_EVDLPISO_SHIFT





SPC_EVD_CFG_REG_EVDSTAT_SHIFT





SPC_EVD_CFG_REG_EVDISO(x)





SPC_EVD_CFG_REG_EVDLPISO(x)





SPC_EVD_CFG_REG_EVDSTAT(x)





struct _spc_sram_voltage_config


Public Members


spc_sram_operate_voltage_t operateVoltage

Specifies the operating voltage for the SRAM’s read/write timing margin. 




bool requestVoltageUpdate

Used to control whether request an SRAM trim value change. 







struct _spc_lowpower_request_config


#include <fsl_spc.h>
Low Power Request output pin configuration. 

Public Members


bool enable

Low Power Request Output enable. 




spc_lowpower_request_pin_polarity_t polarity

Low Power Request Output pin polarity select. 




spc_lowpower_request_output_override_t override

Low Power Request Output Override. 







struct _spc_active_mode_core_ldo_option


#include <fsl_spc.h>
Core LDO regulator options in Active mode. 

Public Members


spc_core_ldo_voltage_level_t CoreLDOVoltage

Core LDO Regulator Voltage Level selection in Active mode. 




spc_core_ldo_drive_strength_t CoreLDODriveStrength

Core LDO Regulator Drive Strength selection in Active mode 







struct _spc_active_mode_sys_ldo_option


#include <fsl_spc.h>
System LDO regulator options in Active mode. 

Public Members


spc_sys_ldo_voltage_level_t SysLDOVoltage

System LDO Regulator Voltage Level selection in Active mode. 




spc_sys_ldo_drive_strength_t SysLDODriveStrength

System LDO Regulator Drive Strength selection in Active mode. 







struct _spc_active_mode_dcdc_option


#include <fsl_spc.h>
DCDC regulator options in Active mode. 

Public Members


spc_dcdc_voltage_level_t DCDCVoltage

DCDC Regulator Voltage Level selection in Active mode. 




spc_dcdc_drive_strength_t DCDCDriveStrength

DCDC_CORE Regulator Drive Strength selection in Active mode. 







struct _spc_lowpower_mode_core_ldo_option


#include <fsl_spc.h>
Core LDO regulator options in Low Power mode. 

Public Members


spc_core_ldo_voltage_level_t CoreLDOVoltage

Core LDO Regulator Voltage Level selection in Low Power mode. 




spc_core_ldo_drive_strength_t CoreLDODriveStrength

Core LDO Regulator Drive Strength selection in Low Power mode 







struct _spc_lowpower_mode_sys_ldo_option


#include <fsl_spc.h>
System LDO regulator options in Low Power mode. 

Public Members


spc_sys_ldo_drive_strength_t SysLDODriveStrength

System LDO Regulator Drive Strength selection in Low Power mode. 







struct _spc_lowpower_mode_dcdc_option


#include <fsl_spc.h>
DCDC regulator options in Low Power mode. 

Public Members


spc_dcdc_voltage_level_t DCDCVoltage

DCDC Regulator Voltage Level selection in Low Power mode. 




spc_dcdc_drive_strength_t DCDCDriveStrength

DCDC_CORE Regulator Drive Strength selection in Low Power mode. 







struct _spc_dcdc_burst_config


#include <fsl_spc.h>
DCDC Burst configuration. 


Deprecated:
Do not recommend to use this structure. 




Public Members


bool sofwareBurstRequest

Enable/Disable DCDC Software Burst Request. 




bool externalBurstRequest

Enable/Disable DCDC External Burst Request. 




bool stabilizeBurstFreq

Enable/Disable DCDC frequency stabilization. 




uint8_t freq

The frequency of the current burst. 







struct _spc_voltage_detect_option


#include <fsl_spc.h>
CORE/SYS/IO VDD Voltage Detect options. 

Public Members


bool HVDInterruptEnable

CORE/SYS/IO VDD High Voltage Detect interrupt enable. 




bool HVDResetEnable

CORE/SYS/IO VDD High Voltage Detect reset enable. 




bool LVDInterruptEnable

CORE/SYS/IO VDD Low Voltage Detect interrupt enable. 




bool LVDResetEnable

CORE/SYS/IO VDD Low Voltage Detect reset enable. 







struct _spc_core_voltage_detect_config


#include <fsl_spc.h>
Core Voltage Detect configuration. 

Public Members


spc_voltage_detect_option_t option

Core VDD Voltage Detect option. 







struct _spc_system_voltage_detect_config


#include <fsl_spc.h>
System Voltage Detect Configuration. 

Public Members


spc_voltage_detect_option_t option

System VDD Voltage Detect option. 




spc_low_voltage_level_select_t level



Deprecated:
, reserved for all devices, will removed in next release. 










struct _spc_io_voltage_detect_config


#include <fsl_spc.h>
IO Voltage Detect Configuration. 

Public Members


spc_voltage_detect_option_t option

IO VDD Voltage Detect option. 




spc_low_voltage_level_select_t level

IO VDD Low-voltage level selection. 







struct _spc_active_mode_regulators_config


#include <fsl_spc.h>
Active mode configuration. 

Public Members


spc_bandgap_mode_t bandgapMode

Specify bandgap mode in active mode. 




bool lpBuff

Enable/disable CMP bandgap buffer. 




spc_active_mode_dcdc_option_t DCDCOption

Specify DCDC configurations in active mode. 




spc_active_mode_sys_ldo_option_t SysLDOOption

Specify System LDO configurations in active mode. 




spc_active_mode_core_ldo_option_t CoreLDOOption

Specify Core LDO configurations in active mode. 







struct _spc_lowpower_mode_regulators_config


#include <fsl_spc.h>
Low Power Mode configuration. 

Public Members


bool lpIREF

Enable/disable low power IREF in low power modes. 




spc_bandgap_mode_t bandgapMode

Specify bandgap mode in low power modes. 




bool lpBuff

Enable/disable CMP bandgap buffer in low power modes. 




bool CoreIVS

Enable/disable CORE VDD internal voltage scaling. 




spc_lowpower_mode_dcdc_option_t DCDCOption

Specify DCDC configurations in low power modes. 




spc_lowpower_mode_sys_ldo_option_t SysLDOOption

Specify system LDO configurations in low power modes. 




spc_lowpower_mode_core_ldo_option_t CoreLDOOption

Specify core LDO configurations in low power modes. 







NBOOT Driver#


typedef uint32_t nboot_sb4_fwtype_t





typedef uint32_t nboot_root_key_usage_t





typedef uint32_t nboot_root_key_revocation_t





typedef uint32_t nboot_root_key_type_and_length_t





typedef uint32_t nboot_soc_lifecycle_t





typedef uint32_t nboot_status_t

Type for nboot status codes. 




typedef uint64_t nboot_status_protected_t

Type for nboot protected status codes. 




FSL_ROMAPI_NBOOT_DRIVER_VERSION

ROMAPI_NBOOT driver version 2.0.0. 




NBOOT_SB4_MANIFEST_MAX_SIZE_IN_BYTES





NBOOT_SB4_BLOCK_MAX_SIZE_IN_BYTES





NBOOT_SB4_GET_INITIAL_FETCH_SIZE





NBOOT_SB4_FWTYPE_DEFAULT





NBOOT_SB4_FWTYPE_NXP_MFW





NBOOT_SB4_FWTYPE_OEM_MFW





kNBOOT_RootKeyUsage_DebugCA_ImageCA_FwCA_ImageKey_FwKey

NBOOT type for the root key usage. 
This type defines the NBOOT root key usage 




kNBOOT_RootKeyUsage_DebugCA





kNBOOT_RootKeyUsage_ImageCA_FwCA





kNBOOT_RootKeyUsage_DebugCA_ImageCA_FwCA





kNBOOT_RootKeyUsage_ImageKey_FwKey





kNBOOT_RootKeyUsage_ImageKey





kNBOOT_RootKeyUsage_FwKey





kNBOOT_RootKeyUsage_Unused





NBOOT_ROOT_CERT_COUNT





kNBOOT_RootKey_Enabled

NBOOT type for the root key revocation. 
This type defines the NBOOT root key revocation 




kNBOOT_RootKey_Revoked





kNBOOT_RootKey_Ecdsa_P256

NBOOT type specifying the elliptic curve to be used. 
This type defines the elliptic curve type and length 




kNBOOT_RootKey_Ecdsa_P384





kNBOOT_RootKey_MlDsa_87





kNBOOT_RootKey_Ecdsa_P384_MlDsa_87





nboot_lc_nxpBlank

Enumeration for SoC Lifecycle. 




nboot_lc_nxpFab





nboot_lc_nxpDev





nboot_lc_nxpProvisioned





nboot_lc_oemOpen





nboot_lc_oemSecureWorld





nboot_lc_oemClosed





nboot_lc_oemLocked





nboot_lc_oemFieldReturn





nboot_lc_nxpFieldReturn





nboot_lc_shredded





MCUX_CSSL_FP_FUNCID_NBOOT_ContextInit

Enumeration for MCUX_CSSL_FP_FUNCID. 




MCUX_CSSL_FP_FUNCID_NBOOT_ContextDeinit





MCUX_CSSL_FP_FUNCID_NBOOT_ContextSetUuid





MCUX_CSSL_FP_FUNCID_NBOOT_Sb4LoadManifest





MCUX_CSSL_FP_FUNCID_NBOOT_Sb4LoadBlock





MCUX_CSSL_FP_FUNCID_NBOOT_SB4CheckAuthenticityAndCompleteness





MCUX_CSSL_FP_FUNCID_NBOOT_ImgAuthenticate





NBOOT_CONTEXT_RTF_OFFSET





kStatus_NBOOT_Success

Operation completed successfully. 




kStatus_NBOOT_Fail

Operation failed. 




kStatus_NBOOT_InvalidArgument

Invalid argument passed to the function. 




kStatus_NBOOT_RequestTimeout

Operation timed out. 




kStatus_NBOOT_KeyNotLoaded

The requested key is not loaded. 




kStatus_NBOOT_AuthFail

Authentication failed. 




kStatus_NBOOT_OperationNotAvaialable

Operation not available on this HW. 




kStatus_NBOOT_KeyNotAvailable

Key is not avaialble. 




kStatus_NBOOT_IvCounterOverflow

Overflow of IV counter (PRINCE/IPED). 




kStatus_NBOOT_SelftestFail

FIPS self-test failure. 




kStatus_NBOOT_InvalidDataFormat

Invalid data format for example antipole 




kStatus_NBOOT_IskCertUserDataTooBig

Size of User data in ISK certificate is greater than 96 bytes 




kStatus_NBOOT_IskCertSignatureOffsetTooSmall

Signature offset in ISK certificate is smaller than expected 




kStatus_NBOOT_MemcpyFail

Unexpected error detected during nboot_memcpy() 




kStatus_NBOOT_RegionIsLocked

IPED/NPX region is locked 




kStatus_NBOOT_SB3_Hashing

nboot_sb3_load_block () background hashing started 




kStatus_NBOOT_SB3_Decrypting

nboot_sb3_load_block () background decrypting started 




kStatus_NBOOT_SB4_Hashing

nboot_sb4_load_block () background hashing started 




kStatus_NBOOT_SB4_Decrypting

nboot_sb4_load_block () background decrypting started 




enum _nboot_hash_algo_t

Algorithm used for nboot HASH operation. 
Values:


enumerator kHASH_Sha1

SHA_1 




enumerator kHASH_Sha256

SHA_256 




enumerator kHASH_Sha512

SHA_512 




enumerator kHASH_Aes

AES 




enumerator kHASH_AesIcb

AES_ICB 






typedef enum _nboot_hash_algo_t nboot_hash_algo_t

Algorithm used for nboot HASH operation. 




uint32_t sc





uint32_t scAp





uint32_t configData[13]





uint8_t opaque[0x00000858u]





nboot_root_key_revocation_t soc_rootKeyRevocation[(4u)]

Provided by caller based on NVM information in CFPA: ROTKH_REVOKE 




uint32_t soc_imageKeyRevocation

Provided by caller based on NVM information in CFPA: IMAGE_KEY_REVOKE 




uint32_t soc_rkh[(12u)]

Provided by caller based on NVM information in CMPA: ROTKH (hash of hashes) In case of kNBOOT_RootKey_Ecdsa_P384, sock_rkh[0..11] are used In case of kNBOOT_RootKey_Ecdsa_P256, sock_rkh[0..7] are used In case of kNBOOT_RootKey_MlDsa_87, sock_rkh[0..11] are used 




uint32_t soc_rkh_1[(12u)]

Provided by caller based on NVM information in CMPA: ROTKH (hash of hashes) In case of kNBOOT_RootKey_MlDsa_87, sock_rkh[0..11] are used 




uint32_t soc_numberOfRootKeys





nboot_root_key_usage_t soc_rootKeyUsage[(4u)]





nboot_root_key_type_and_length_t soc_rootKeyTypeAndLength





nboot_soc_lifecycle_t soc_lifecycle





nboot_rot_auth_parms_t soc_RoTNVM





uint32_t soc_trustedFirmwareVersion

Provided by caller based on NVM information in CFPA: Secure_FW_Version 




nboot_rot_auth_parms_t soc_RoTNVM





uint32_t soc_trustedFirmwareVersion

trusted information originated from CFPA and NMPA Provided by caller based on NVM information in CFPA: Secure_FW_Version 




uint32_t maxBlockSize

Provided by caller: supported maximal data block size (complete block) 




uint8_t pckBlob[48]





nboot_mem_crypt_engine_type_t configId





uint32_t startAddress





uint32_t endAddress





uint64_t subregion





uint32_t ivEraseCounter





uint8_t regionLock





nboot_mem_crypt_engine_type_t configId





uint32_t startAddress





uint32_t endAddress





uint32_t ivEraseCounter





uint8_t regionFlags





uint32_t aad





nboot_npx_region_config_t npxConfig





nboot_iped_region_config_t ipedConfig





NBOOT_UUID_SIZE_IN_WORD

The size of the UUID. 




NBOOT_UUID_SIZE_IN_BYTE





NBOOT_PUF_AC_SIZE_IN_BYTE

The size of the PUF activation code. 




NBOOT_PUF_KC_SIZE_IN_BYTE

The size of the PUF key code. 




NBOOT_KEY_STORE_SIZE_IN_BYTE

The size of the key store. 




NBOOT_ROOT_ROTKH_SIZE_IN_WORD

The size of the root of trust key table hash. 




NBOOT_ROOT_ROTKH_SIZE_IN_BYTE





NBOOT_KEY_BLOB_SIZE_IN_BYTE_256

The size of the blob with Part Common Key. 




NBOOT_KEY_BLOB_SIZE_IN_BYTE_384





NBOOT_KEY_BLOB_SIZE_IN_BYTE_MAX





NBOOT_DBG_AUTH_DBG_STATE_MASK

The mask of the value of the debug state . 




NBOOT_DBG_AUTH_DBG_STATE_SHIFT

The shift inverted value of the debug state. 




NBOOT_DBG_AUTH_DBG_STATE_ALL_DISABLED

The value with all debug feature disabled. 




NBOOT_DICE_CSR_SIZE_IN_WORD





NBOOT_DICE_CSR_SIZE_IN_BYTES





NBOOT_DICE_CSR_ADDRESS





NBOOT_IPED_IV_OFFSET

The offset for the PRCINE/IPED erase region return by nboot mem checker. 




NBOOT_IMAGE_CMAC_UPDATE_NONE





NBOOT_IMAGE_CMAC_UPDATE_INDEX0





NBOOT_IMAGE_CMAC_UPDATE_INDEX1





NBOOT_IMAGE_CMAC_UPDATE_BOTH





NBOOT_IMAGE_CMAC_UPDATE_MASK





NBOOT_CMPA_CMAC_UPDATE_MASK





NBOOT_CMPA_CMAC_UPDATE_SHIFT





NBOOT_CMPA_UPDATE_CMAC_PFR





NBOOT_CMPA_UPDATE_CMAC_PFR_OTP_OEM_SECURE





NBOOT_CMPA_UPDATE_CMAC_PFR_OTP_OEM_CLOSE





NBOOT_CMPA_UPDATE_CMAC_PFR_OTP_OEM_LOCKED





EFUSE_PART_CFG_FUSE_INDEX





This type defines status return values used by NBOOT functions that are not easily#


kStatus_NBOOT_Success

Operation completed successfully. 




kStatus_NBOOT_Fail

Operation failed. 




kStatus_NBOOT_InvalidArgument

Invalid argument passed to the function. 




kStatus_NBOOT_RequestTimeout

Operation timed out. 




kStatus_NBOOT_KeyNotLoaded

The requested key is not loaded. 




kStatus_NBOOT_AuthFail

Authentication failed. 




kStatus_NBOOT_OperationNotAvaialable

Operation not available on this HW. 




kStatus_NBOOT_KeyNotAvailable

Key is not avaialble. 




kStatus_NBOOT_IvCounterOverflow

Overflow of IV counter (PRINCE/IPED). 




kStatus_NBOOT_SelftestFail

FIPS self-test failure. 




kStatus_NBOOT_InvalidDataFormat

Invalid data format for example antipole 




kStatus_NBOOT_IskCertUserDataTooBig

Size of User data in ISK certificate is greater than 96 bytes 




kStatus_NBOOT_IskCertSignatureOffsetTooSmall

Signature offset in ISK certificate is smaller than expected 




kStatus_NBOOT_MemcpyFail

Unexpected error detected during nboot_memcpy() 




kStatus_NBOOT_RegionIsLocked

IPED/NPX region is locked 




kStatus_NBOOT_SB3_Hashing

nboot_sb3_load_block () background hashing started 




kStatus_NBOOT_SB3_Decrypting

nboot_sb3_load_block () background decrypting started 




kStatus_NBOOT_SB4_Hashing

nboot_sb4_load_block () background hashing started 




kStatus_NBOOT_SB4_Decrypting

nboot_sb4_load_block () background decrypting started 




enum _nboot_bool

Boolean type for the NBOOT functions. 
This type defines boolean values used by NBOOT functions that are not easily disturbed by Fault Attacks 
Values:


enumerator kNBOOT_TRUE

Value for TRUE. 




enumerator kNBOOT_TRUE256

Value for TRUE when P256 was used to sign the image. 




enumerator kNBOOT_TRUE384

Value for TRUE when P384 was used to sign the image. 




enumerator kNBOOT_FALSE

Value for FALSE. 




enumerator kNBOOT_OperationAllowed





enumerator kNBOOT_OperationDisallowed







enum nboot_mem_crypt_iped_mode_select_t

Values:


enumerator kNBOOT_MemCrypt12Rounds





enumerator kNBOOT_MemCrypt22Rounds





enumerator kNBOOT_MemCryptFullyPipelined





enumerator kNBOOT_MemCryptNotFullyPipelined







enum nboot_mem_crypt_engine_type_t

Values:


enumerator kNBOOT_MemCryptNpx





enumerator kNBOOT_MemCryptIped







typedef struct _nboot_secure_counter nboot_secure_counter_t

Data structure holding secure counter value used by nboot library. 




typedef struct nboot_trng_cfg_load nboot_trng_cfg_load_t





typedef struct nboot_context_struct nboot_context_t





typedef struct nboot_rot_auth_parms_ nboot_rot_auth_parms_t

NBOOT type for the root of trust parameters. 
This type defines the NBOOT root of trust parameters 




typedef struct nboot_img_auth_parms_struct nboot_img_auth_parms_t

Data structure holding input arguments to POR secure boot (authentication) algorithm. Shall be read from SoC trusted NVM or SoC fuses. 




typedef struct nboot_sb4_load_manifest_parms_struct nboot_sb4_load_manifest_parms_t

manifest loading parameters 
This type defines the NBOOT SB4 manifest loading parameters 




typedef enum _nboot_bool nboot_bool_t

Boolean type for the NBOOT functions. 
This type defines boolean values used by NBOOT functions that are not easily disturbed by Fault Attacks 




typedef uint32_t nboot_mem_crypt_region_t





typedef uint32_t nboot_mem_crypt_operation_t





typedef struct nboot_npx_region_config_struct nboot_npx_region_config_t





typedef struct nboot_iped_region_config_struct nboot_iped_region_config_t





typedef union nboot_mem_crypt_region_config_union nboot_mem_crypt_region_config_t





nboot_status_protected_t NBOOT_ContextInit(nboot_context_t *context)

The function is used for initializing of the nboot context data structure. It should be called prior to any other calls of nboot API. 

Parameters:

nbootCtx – Pointer to nboot_context_t structure.


Return values:

kStatus_NBOOT_Success – Operation successfully finished 
kStatus_NBOOT_Fail – Error occured during operation 







nboot_status_protected_t NBOOT_ContextDeinit(nboot_context_t *context)

The function is used to deinitialize nboot context data structure. Its contents are overwritten with random data so that any sensitive data does not remain in memory. 

Parameters:

context – Pointer to nboot_context_t structure.


Return values:

kStatus_NBOOT_Success – Operation successfully finished 
kStatus_NBOOT_Fail – Error occured during operation 







nboot_status_protected_t NBOOT_ContextSetUuid(nboot_context_t *context, const uint8_t uuid[16])

Set UUID in the nboot context. 
This function sets the UUID (Universally Unique Identifier) in the nboot context structure. The NBOOT context has to be initialized by the function nboot_context_init before calling this function.

Parameters:

context – Pointer to nboot_context_t structure. 
uuid – Pointer to 16-byte UUID array to be set in the context.


Return values:

kStatus_NBOOT_Success – Operation successfully finished 
kStatus_NBOOT_Fail – Error occured during operation 







nboot_status_protected_t NBOOT_Sb4LoadManifest(nboot_context_t *context, const uint32_t *manifest, nboot_sb4_load_manifest_parms_t *parms)

Load NBOOT SB4 manifest. 
This function loads and processes an NBOOT SB4 manifest. The manifest contains metadata and configuration information for the SB4 file processing. The NBOOT context has to be initialized by the function nboot_context_init before calling this function.

Parameters:

context – Pointer to nboot_context_t structure. 
manifest – Pointer to the SB4 manifest data. 
parms – Pointer to a data structure in trusted memory, holding input parameters for the algorithm. The data structure shall be correctly filled before the function call.


Return values:

kStatus_NBOOT_Success – Operation successfully finished 
kStatus_NBOOT_Fail – Error occured during operation 







nboot_status_protected_t NBOOT_Sb4LoadBlock(nboot_context_t *context, uint32_t *block)

Load NBOOT SB4 block. 
This function loads and processes an NBOOT SB4 block. The NBOOT context has to be initialized by the function nboot_context_init before calling this function.

Parameters:

context – Pointer to nboot_context_t structure. 
block – Pointer to the SB4 block data to be loaded.


Return values:

kStatus_NBOOT_Success – Operation successfully finished 
kStatus_NBOOT_Fail – Error occured during operation 







nboot_status_protected_t NBOOT_SB4CheckAuthenticityAndCompleteness(nboot_context_t *context, const uint32_t *address, nboot_sb4_load_manifest_parms_t *parms)

Check authenticity and completeness of NBOOT SB4 file. 
This function verifies the authenticity and completeness of an NBOOT SB4 file. The NBOOT context has to be initialized by the function nboot_context_init before calling this function.

Parameters:

context – Pointer to nboot_context_t structure. 
address – Pointer to the SB4 file data in memory. 
parms – Pointer to a data structure in trusted memory, holding input parameters for the algorithm. The data structure shall be correctly filled before the function call.


Return values:

kStatus_NBOOT_Success – Operation successfully finished 
kStatus_NBOOT_Fail – Error occured during operation 







nboot_status_protected_t NBOOT_ImgAuthenticate(nboot_context_t *context, const uint8_t imageStartAddress[], nboot_bool_t *isSignatureVerified, nboot_img_auth_parms_t *parms)

Authenticate NBOOT image. 
This function authenticates an NBOOT image by verifying its signature and integrity. The NBOOT context has to be initialized by the function nboot_context_init before calling this function.

Parameters:

context – Pointer to nboot_context_t structure. 
imageStartAddress – Pointer to the start address of the image data to be authenticated. 
isSignatureVerified – Pointer to a boolean flag that will be set to indicate if the signature was verified. 
parms – Pointer to a data structure in trusted memory, holding input parameters for the algorithm. The data structure shall be correctly filled before the function call.


Return values:

kStatus_NBOOT_Success – Operation successfully finished 
kStatus_NBOOT_Fail – Error occured during operation 







nboot_status_protected_t NBOOT_MemCryptEnableEncryptForAddressRange(nboot_context_t *context, nboot_mem_crypt_region_t regionNumber, nboot_mem_crypt_region_config_t *regionConfig, nboot_mem_crypt_iped_mode_select_t ipedModeSelect)

Enable memory encryption for address range. 
This function enables memory encryption for a specified address range using the NBOOT memory cryptography features. The NBOOT context has to be initialized by the function nboot_context_init before calling this function.

Parameters:

context – Pointer to nboot_context_t structure. 
regionNumber – The memory region number to configure. 
regionConfig – Pointer to the region configuration structure. 
ipedModeSelect – IPED mode selection parameter.


Return values:

kStatus_NBOOT_Success – Operation successfully finished 
kStatus_NBOOT_Fail – Error occured during operation 







nboot_status_protected_t NBOOT_MemCryptRangeChecker(nboot_context_t *context, nboot_mem_crypt_operation_t operation, uint32_t address, uint32_t length, uint8_t *flags, uint32_t *npx_iv_erase_cntr, uint32_t *iped_iv_erase_cntr, uint32_t npx_erase_check_en)

Memory cryptography range checker. 
This function performs range checking for memory cryptography operations. The NBOOT context has to be initialized by the function nboot_context_init before calling this function.

Parameters:

context – Pointer to nboot_context_t structure. 
operation – The memory cryptography operation type. 
address – The start address to check. 
length – The length of the memory range to check. 
flags – Pointer to flags output parameter. 
npx_iv_erase_cntr – Pointer to NPX IV erase counter output parameter. 
iped_iv_erase_cntr – Pointer to IPED IV erase counter output parameter. 
npx_erase_check_en – NPX erase check enable parameter.


Return values:

kStatus_NBOOT_Success – Operation successfully finished 
kStatus_NBOOT_Fail – Error occured during operation 







nboot_status_protected_t NBOOT_BackgroundHashEnable(nboot_context_t *context, uint32_t hashDmaChannel)

Enable background hash. 
This function enables background hash functionality using the specified DMA channel. The NBOOT context has to be initialized by the function nboot_context_init before calling this function.

Parameters:

context – Pointer to nboot_context_t structure. 
hashDmaChannel – The DMA channel to use for background hash operations.


Return values:

kStatus_NBOOT_Success – Operation successfully finished 
kStatus_NBOOT_Fail – Error occured during operation 







NBOOT_RKTH_SIZE_IN_WORDS





struct _nboot_secure_counter


#include <fsl_nboot.h>
Data structure holding secure counter value used by nboot library. 




struct nboot_trng_cfg_load





struct nboot_context_struct





struct nboot_rot_auth_parms_


#include <fsl_nboot.h>
NBOOT type for the root of trust parameters. 
This type defines the NBOOT root of trust parameters 




struct nboot_img_auth_parms_struct


#include <fsl_nboot.h>
Data structure holding input arguments to POR secure boot (authentication) algorithm. Shall be read from SoC trusted NVM or SoC fuses. 




struct nboot_sb4_load_manifest_parms_struct


#include <fsl_nboot.h>
manifest loading parameters 
This type defines the NBOOT SB4 manifest loading parameters 




struct nboot_npx_region_config_struct





struct nboot_iped_region_config_struct





union nboot_mem_crypt_region_config_union





OSTIMER: OS Event Timer Driver#


void OSTIMER_Init(OSTIMER_Type *base)

Initializes an OSTIMER by turning its bus clock on. 




void OSTIMER_Deinit(OSTIMER_Type *base)

Deinitializes a OSTIMER instance. 
This function shuts down OSTIMER bus clock

Parameters:

base – OSTIMER peripheral base address. 







uint64_t OSTIMER_GrayToDecimal(uint64_t gray)

Translate the value from gray-code to decimal. 

Parameters:

gray – The gray value input. 


Returns:
The decimal value. 






static inline uint64_t OSTIMER_DecimalToGray(uint64_t dec)

Translate the value from decimal to gray-code. 

Parameters:

dec – The decimal value. 


Returns:
The gray code of the input value. 






uint32_t OSTIMER_GetStatusFlags(OSTIMER_Type *base)

Get OSTIMER status Flags. 
This returns the status flag. Currently, only match interrupt flag can be got.

Parameters:

base – OSTIMER peripheral base address. 


Returns:
status register value 






void OSTIMER_ClearStatusFlags(OSTIMER_Type *base, uint32_t mask)

Clear Status Interrupt Flags. 
This clears intrrupt status flag. Currently, only match interrupt flag can be cleared.

Parameters:

base – OSTIMER peripheral base address. 
mask – Clear bit mask. 


Returns:
none 






status_t OSTIMER_SetMatchRawValue(OSTIMER_Type *base, uint64_t count, ostimer_callback_t cb)

Set the match raw value for OSTIMER. 
This function will set a match value for OSTIMER with an optional callback. And this callback will be called while the data in dedicated pair match register is equals to the value of central EVTIMER. Please note that, the data format may be gray-code, if so, please using OSTIMER_SetMatchValue().

Parameters:

base – OSTIMER peripheral base address. 
count – OSTIMER timer match value.(Value may be gray-code format)
cb – OSTIMER callback (can be left as NULL if none, otherwise should be a void func(void)). 


Return values:
kStatus_Success – - Set match raw value and enable interrupt Successfully. 






status_t OSTIMER_SetMatchValue(OSTIMER_Type *base, uint64_t count, ostimer_callback_t cb)

Set the match value for OSTIMER. 
This function will set a match value for OSTIMER with an optional callback. And this callback will be called while the data in dedicated pair match register is equals to the value of central OS TIMER.

Parameters:

base – OSTIMER peripheral base address. 
count – OSTIMER timer match value.(Value is decimal format, and this value will be translate to Gray code in API if the IP counter is gray encoded.)
cb – OSTIMER callback (can be left as NULL if none, otherwise should be a void func(void)). 


Return values:
kStatus_Success – - Set match raw value and enable interrupt Successfully. 






static inline void OSTIMER_SetMatchRegister(OSTIMER_Type *base, uint64_t value)

Set value to OSTIMER MATCH register directly. 
This function writes the input value to OSTIMER MATCH register directly, it does not touch any other registers. Note that, the data format is gray-code. The function OSTIMER_DecimalToGray could convert decimal value to gray code.

Parameters:

base – OSTIMER peripheral base address. 
value – OSTIMER timer match value (Value is gray-code format). 







static inline uint64_t OSTIMER_GetMatchRegister(OSTIMER_Type *base)

Get the match value from OSTIMER. 
This function will get the match value from OSTIMER. The value of timer match is gray code format.

Parameters:

base – OSTIMER peripheral base address. 


Returns:
Value of match register, data format is gray code. 






static inline uint64_t OSTIMER_GetMatchValue(OSTIMER_Type *base)

Get the match value from OSTIMER. 
This function will get a match value from OSTIMER.

Parameters:

base – OSTIMER peripheral base address. 


Returns:
Value of match register. 






static inline void OSTIMER_EnableMatchInterrupt(OSTIMER_Type *base)

Enable the OSTIMER counter match interrupt. 
Enable the timer counter match interrupt. The interrupt happens when OSTIMER counter matches the value in MATCH registers.

Parameters:

base – OSTIMER peripheral base address. 







static inline void OSTIMER_DisableMatchInterrupt(OSTIMER_Type *base)

Disable the OSTIMER counter match interrupt. 
Disable the timer counter match interrupt. The interrupt happens when OSTIMER counter matches the value in MATCH registers.

Parameters:

base – OSTIMER peripheral base address. 







static inline uint64_t OSTIMER_GetCurrentTimerRawValue(OSTIMER_Type *base)

Get current timer raw count value from OSTIMER. 
This function will get the timer count value from OS timer register. The raw value of timer count may be gray code format.

Parameters:

base – OSTIMER peripheral base address. 


Returns:
Raw value of OSTIMER, may be gray code format. 






uint64_t OSTIMER_GetCurrentTimerValue(OSTIMER_Type *base)

Get current timer count value from OSTIMER. 
This function will get a decimal timer count value. If the RAW value of timer count is gray code format, it will be translated to decimal data internally.

Parameters:

base – OSTIMER peripheral base address. 


Returns:
Value of OSTIMER which will be formated to decimal value. 






static inline uint64_t OSTIMER_GetCaptureRawValue(OSTIMER_Type *base)

Get the capture value from OSTIMER. 
This function will get a captured value from OSTIMER. The Raw value of timer capture may be gray code format.

Parameters:

base – OSTIMER peripheral base address. 


Returns:
Raw value of capture register, data format may be gray code. 






uint64_t OSTIMER_GetCaptureValue(OSTIMER_Type *base)

Get the capture value from OSTIMER. 
This function will get a capture decimal-value from OSTIMER. If the RAW value of timer count is gray code format, it will be translated to decimal data internally.

Parameters:

base – OSTIMER peripheral base address. 


Returns:
Value of capture register, data format is decimal. 






void OSTIMER_HandleIRQ(OSTIMER_Type *base, ostimer_callback_t cb)

OS timer interrupt Service Handler. 
This function handles the interrupt and refers to the callback array in the driver to callback user (as per request in OSTIMER_SetMatchValue()). if no user callback is scheduled, the interrupt will simply be cleared.

Parameters:

base – OS timer peripheral base address. 
cb – callback scheduled for this instance of OS timer 


Returns:
none 






FSL_OSTIMER_DRIVER_VERSION

OSTIMER driver version. 




enum _ostimer_flags

OSTIMER status flags. 
Values:


enumerator kOSTIMER_MatchInterruptFlag

Match interrupt flag bit, sets if the match value was reached. 






typedef void (*ostimer_callback_t)(void)

ostimer callback function. 




PORT: Port Control and Interrupts#


static inline void PORT_GetVersionInfo(PORT_Type *base, port_version_info_t *info)

Get PORT version information. 

Parameters:

base – PORT peripheral base pointer 
info – PORT version information 







static inline void PORT_SecletPortVoltageRange(PORT_Type *base, port_voltage_range_t range)

Get PORT version information. 

Note
: PORTA_CONFIG[RANGE] controls the voltage ranges of Port A, B, and C. Read or write PORTB_CONFIG[RANGE] and PORTC_CONFIG[RANGE] does not take effect.


Parameters:

base – PORT peripheral base pointer 
range – port voltage range 







static inline void PORT_SetPinConfig(PORT_Type *base, uint32_t pin, const port_pin_config_t *config)

Sets the port PCR register. 
This is an example to define an input pin or output pin PCR configuration. 
// Define a digital input pin PCR configuration
port_pin_config_t config = {
     kPORT_PullUp,
     kPORT_FastSlewRate,
     kPORT_PassiveFilterDisable,
     kPORT_OpenDrainDisable,
     kPORT_LowDriveStrength,
     kPORT_MuxAsGpio,
     kPORT_UnLockRegister,
};




Parameters:

base – PORT peripheral base pointer. 
pin – PORT pin number. 
config – PORT PCR register configuration structure. 







static inline void PORT_SetMultiplePinsConfig(PORT_Type *base, uint32_t mask, const port_pin_config_t *config)

Sets the port PCR register for multiple pins. 
This is an example to define input pins or output pins PCR configuration. 
Define a digital input pin PCR configuration
port_pin_config_t config = {
     kPORT_PullUp ,
     kPORT_PullEnable,
     kPORT_FastSlewRate,
     kPORT_PassiveFilterDisable,
     kPORT_OpenDrainDisable,
     kPORT_LowDriveStrength,
     kPORT_MuxAsGpio,
     kPORT_UnlockRegister,
};




Parameters:

base – PORT peripheral base pointer. 
mask – PORT pin number macro. 
config – PORT PCR register configuration structure. 







static inline void PORT_SetPinMux(PORT_Type *base, uint32_t pin, port_mux_t mux)

Configures the pin muxing. 

Note
: This function is NOT recommended to use together with the PORT_SetPinsConfig, because the PORT_SetPinsConfig need to configure the pin mux anyway (Otherwise the pin mux is reset to zero : kPORT_PinDisabledOrAnalog). This function is recommended to use to reset the pin mux 


Parameters:

base – PORT peripheral base pointer. 
pin – PORT pin number. 
mux – pin muxing slot selection.

kPORT_PinDisabledOrAnalog: Pin disabled or work in analog function.
kPORT_MuxAsGpio : Set as GPIO.
kPORT_MuxAlt2 : chip-specific.
kPORT_MuxAlt3 : chip-specific.
kPORT_MuxAlt4 : chip-specific.
kPORT_MuxAlt5 : chip-specific.
kPORT_MuxAlt6 : chip-specific.
kPORT_MuxAlt7 : chip-specific. 









static inline void PORT_EnablePinsDigitalFilter(PORT_Type *base, uint32_t mask, bool enable)

Enables the digital filter in one port, each bit of the 32-bit register represents one pin. 

Parameters:

base – PORT peripheral base pointer. 
mask – PORT pin number macro. 
enable – PORT digital filter configuration. 







static inline void PORT_SetDigitalFilterConfig(PORT_Type *base, const port_digital_filter_config_t *config)

Sets the digital filter in one port, each bit of the 32-bit register represents one pin. 

Parameters:

base – PORT peripheral base pointer. 
config – PORT digital filter configuration structure. 







static inline void PORT_SetPinDriveStrength(PORT_Type *base, uint32_t pin, uint8_t strength)

Configures the port pin drive strength. 

Parameters:

base – PORT peripheral base pointer. 
pin – PORT pin number. 
strength – PORT pin drive strength

kPORT_LowDriveStrength = 0U - Low-drive strength is configured.
kPORT_HighDriveStrength = 1U - High-drive strength is configured. 









static inline void PORT_EnablePinDoubleDriveStrength(PORT_Type *base, uint32_t pin, bool enable)

Enables the port pin double drive strength. 

Parameters:

base – PORT peripheral base pointer. 
pin – PORT pin number. 
enable – PORT pin drive strength configuration. 







static inline void PORT_SetPinPullValue(PORT_Type *base, uint32_t pin, uint8_t value)

Configures the port pin pull value. 

Parameters:

base – PORT peripheral base pointer. 
pin – PORT pin number. 
value – PORT pin pull value

kPORT_LowPullResistor = 0U - Low internal pull resistor value is selected.
kPORT_HighPullResistor = 1U - High internal pull resistor value is selected. 









static inline uint32_t PORT_GetEFTDetectFlags(PORT_Type *base)

Get EFT detect flags. 

Parameters:

base – PORT peripheral base pointer 


Returns:
EFT detect flags 






static inline void PORT_EnableEFTDetectInterrupts(PORT_Type *base, uint32_t interrupt)

Enable EFT detect interrupts. 

Parameters:

base – PORT peripheral base pointer 
interrupt – EFT detect interrupt 







static inline void PORT_DisableEFTDetectInterrupts(PORT_Type *base, uint32_t interrupt)

Disable EFT detect interrupts. 

Parameters:

base – PORT peripheral base pointer 
interrupt – EFT detect interrupt 







static inline void PORT_ClearAllLowEFTDetectors(PORT_Type *base)

Clear all low EFT detector. 

Note
: Port B and Port C pins share the same EFT detector clear control from PORTC_EDCR register. Any write to the PORTB_EDCR does not take effect. 


Parameters:

base – PORT peripheral base pointer 







static inline void PORT_ClearAllHighEFTDetectors(PORT_Type *base)

Clear all high EFT detector. 

Parameters:

base – PORT peripheral base pointer 







FSL_PORT_DRIVER_VERSION

PORT driver version. 




enum _port_pull

Internal resistor pull feature selection. 
Values:


enumerator kPORT_PullDisable

Internal pull-up/down resistor is disabled. 




enumerator kPORT_PullDown

Internal pull-down resistor is enabled. 




enumerator kPORT_PullUp

Internal pull-up resistor is enabled. 






enum _port_pull_value

Internal resistor pull value selection. 
Values:


enumerator kPORT_LowPullResistor

Low internal pull resistor value is selected. 




enumerator kPORT_HighPullResistor

High internal pull resistor value is selected. 






enum _port_slew_rate

Slew rate selection. 
Values:


enumerator kPORT_FastSlewRate

Fast slew rate is configured. 




enumerator kPORT_SlowSlewRate

Slow slew rate is configured. 






enum _port_open_drain_enable

Open Drain feature enable/disable. 
Values:


enumerator kPORT_OpenDrainDisable

Open drain output is disabled. 




enumerator kPORT_OpenDrainEnable

Open drain output is enabled. 






enum _port_passive_filter_enable

Passive filter feature enable/disable. 
Values:


enumerator kPORT_PassiveFilterDisable

Passive input filter is disabled. 




enumerator kPORT_PassiveFilterEnable

Passive input filter is enabled. 






enum _port_drive_strength

Configures the drive strength. 
Values:


enumerator kPORT_LowDriveStrength

Low-drive strength is configured. 




enumerator kPORT_HighDriveStrength

High-drive strength is configured. 






enum _port_drive_strength1

Configures the drive strength1. 
Values:


enumerator kPORT_NormalDriveStrength

Normal drive strength 




enumerator kPORT_DoubleDriveStrength

Double drive strength 






enum _port_input_buffer

input buffer disable/enable. 
Values:


enumerator kPORT_InputBufferDisable

Digital input is disabled 




enumerator kPORT_InputBufferEnable

Digital input is enabled 






enum _port_invet_input

Digital input is not inverted or it is inverted. 
Values:


enumerator kPORT_InputNormal

Digital input is not inverted 




enumerator kPORT_InputInvert

Digital input is inverted 






enum _port_lock_register

Unlock/lock the pin control register field[15:0]. 
Values:


enumerator kPORT_UnlockRegister

Pin Control Register fields [15:0] are not locked. 




enumerator kPORT_LockRegister

Pin Control Register fields [15:0] are locked. 






enum _port_mux

Pin mux selection. 
Values:


enumerator kPORT_PinDisabledOrAnalog

Corresponding pin is disabled, but is used as an analog pin. 




enumerator kPORT_MuxAsGpio

Corresponding pin is configured as GPIO. 




enumerator kPORT_MuxAlt0

Chip-specific 




enumerator kPORT_MuxAlt1

Chip-specific 




enumerator kPORT_MuxAlt2

Chip-specific 




enumerator kPORT_MuxAlt3

Chip-specific 




enumerator kPORT_MuxAlt4

Chip-specific 




enumerator kPORT_MuxAlt5

Chip-specific 




enumerator kPORT_MuxAlt6

Chip-specific 




enumerator kPORT_MuxAlt7

Chip-specific 




enumerator kPORT_MuxAlt8

Chip-specific 




enumerator kPORT_MuxAlt9

Chip-specific 




enumerator kPORT_MuxAlt10

Chip-specific 




enumerator kPORT_MuxAlt11

Chip-specific 




enumerator kPORT_MuxAlt12

Chip-specific 




enumerator kPORT_MuxAlt13

Chip-specific 




enumerator kPORT_MuxAlt14

Chip-specific 




enumerator kPORT_MuxAlt15

Chip-specific 






enum _port_digital_filter_clock_source

Digital filter clock source selection. 
Values:


enumerator kPORT_BusClock

Digital filters are clocked by the bus clock. 




enumerator kPORT_LpoClock

Digital filters are clocked by the 1 kHz LPO clock. 






enum _port_voltage_range

PORT voltage range. 
Values:


enumerator kPORT_VoltageRange1Dot71V_3Dot6V

Port voltage range is 1.71 V - 3.6 V. 




enumerator kPORT_VoltageRange2Dot70V_3Dot6V

Port voltage range is 2.70 V - 3.6 V. 






typedef enum _port_mux port_mux_t

Pin mux selection. 




typedef enum _port_digital_filter_clock_source port_digital_filter_clock_source_t

Digital filter clock source selection. 




typedef struct _port_digital_filter_config port_digital_filter_config_t

PORT digital filter feature configuration definition. 




typedef struct _port_pin_config port_pin_config_t

PORT pin configuration structure. 




typedef struct _port_version_info port_version_info_t

PORT version information. 




typedef enum _port_voltage_range port_voltage_range_t

PORT voltage range. 




FSL_COMPONENT_ID





struct _port_digital_filter_config


#include <fsl_port.h>
PORT digital filter feature configuration definition. 

Public Members


uint32_t digitalFilterWidth

Set digital filter width 




port_digital_filter_clock_source_t clockSource

Set digital filter clockSource 







struct _port_pin_config


#include <fsl_port.h>
PORT pin configuration structure. 

Public Members


uint16_t pullSelect

No-pull/pull-down/pull-up select 




uint16_t pullValueSelect

Pull value select 




uint16_t slewRate

Fast/slow slew rate Configure 




uint16_t passiveFilterEnable

Passive filter enable/disable 




uint16_t openDrainEnable

Open drain enable/disable 




uint16_t driveStrength

Fast/slow drive strength configure 




uint16_t driveStrength1

Normal/Double drive strength enable/disable 




uint16_t inputBuffer

Input Buffer Configure 




uint16_t invertInput

Invert Input Configure 




uint16_t lockRegister

Lock/unlock the PCR field[15:0] 







struct _port_version_info


#include <fsl_port.h>
PORT version information. 

Public Members


uint16_t feature

Feature Specification Number. 




uint8_t minor

Minor Version Number. 




uint8_t major

Major Version Number. 







Reset Driver#


enum _SYSCON_RSTn

Enumeration for peripheral reset control bits. 
Defines the enumeration for peripheral reset control bits in PRESETCTRL/ASYNCPRESETCTRL registers 
Values:


enumerator kINPUTMUX0_RST_SHIFT_RSTn

INPUTMUX0 reset control 




enumerator kFREQME_RST_SHIFT_RSTn

FREQME reset control 




enumerator kCTIMER0_RST_SHIFT_RSTn

CTIMER0 reset control 




enumerator kCTIMER1_RST_SHIFT_RSTn

CTIMER1 reset control 




enumerator kCTIMER2_RST_SHIFT_RSTn

CTIMER2 reset control 




enumerator kCTIMER3_RST_SHIFT_RSTn

CTIMER3 reset control 




enumerator kCTIMER4_RST_SHIFT_RSTn

CTIMER4 reset control 




enumerator kUTICK0_RST_SHIFT_RSTn

UTICK0 reset control 




enumerator kDMA0_RST_SHIFT_RSTn

DMA0 reset control 




enumerator kDMA1_RST_SHIFT_RSTn

DMA1 reset control 




enumerator kAOI0_RST_SHIFT_RSTn

AOI0 reset control 




enumerator kCRC0_RST_SHIFT_RSTn

CRC0 reset control 




enumerator kEIM0_RST_SHIFT_RSTn

EIM0 reset control 




enumerator kERM0_RST_SHIFT_RSTn

ERM0 reset control 




enumerator kFLEXIO0_RST_SHIFT_RSTn

FLEXIO0 reset control 




enumerator kLPI2C0_RST_SHIFT_RSTn

LPI2C0 reset control 




enumerator kLPI2C1_RST_SHIFT_RSTn

LPI2C1 reset control 




enumerator kLPI2C2_RST_SHIFT_RSTn

LPI2C2 reset control 




enumerator kLPI2C3_RST_SHIFT_RSTn

LPI2C3 reset control 




enumerator kLPI2C4_RST_SHIFT_RSTn

LPI2C4 reset control 




enumerator kLPUART0_RST_SHIFT_RSTn

LPUART0 reset control 




enumerator kLPUART1_RST_SHIFT_RSTn

LPUART1 reset control 




enumerator kLPUART2_RST_SHIFT_RSTn

LPUART2 reset control 




enumerator kLPUART3_RST_SHIFT_RSTn

LPUART3 reset control 




enumerator kLPUART4_RST_SHIFT_RSTn

LPUART4 reset control 




enumerator kLPUART5_RST_SHIFT_RSTn

LPUART5 reset control 




enumerator kOSTIMER0_RST_SHIFT_RSTn

OSTIMER0 reset control 




enumerator kLPSPI0_RST_SHIFT_RSTn

LPSPI0 reset control 




enumerator kLPSPI1_RST_SHIFT_RSTn

LPSPI1 reset control 




enumerator kLPSPI2_RST_SHIFT_RSTn

LPSPI2 reset control 




enumerator kLPSPI3_RST_SHIFT_RSTn

LPSPI3 reset control 




enumerator kLPSPI4_RST_SHIFT_RSTn

LPSPI4 reset control 




enumerator kLPSPI5_RST_SHIFT_RSTn

LPSPI5 reset control 




enumerator kPORT0_RST_SHIFT_RSTn

PORT0 reset control 




enumerator kPORT1_RST_SHIFT_RSTn

PORT1 reset control 




enumerator kPORT2_RST_SHIFT_RSTn

PORT2 reset control 




enumerator kPORT3_RST_SHIFT_RSTn

PORT3 reset control 




enumerator kPORT4_RST_SHIFT_RSTn

PORT4 reset control 




enumerator kADC0_RST_SHIFT_RSTn

ADC0 reset control 




enumerator kADC1_RST_SHIFT_RSTn

ADC1 reset control 




enumerator kDAC0_RST_SHIFT_RSTn

DAC0 reset control 




enumerator kDAC1_RST_SHIFT_RSTn

DAC1 reset control 




enumerator kVREF0_RST_SHIFT_RSTn

VREF0 reset control 




enumerator kI3C0_RST_SHIFT_RSTn

I3C0 reset control 




enumerator kI3C1_RST_SHIFT_RSTn

I3C1 reset control 




enumerator kI3C2_RST_SHIFT_RSTn

I3C2 reset control 




enumerator kI3C3_RST_SHIFT_RSTn

I3C3 reset control 




enumerator kFLEXCAN0_RST_SHIFT_RSTn

FLEXCAN0 reset control 




enumerator kFLEXCAN1_RST_SHIFT_RSTn

FLEXCAN1 reset control 




enumerator kENET0_RST_SHIFT_RSTn

ENET0 reset control 




enumerator kT1S0_RST_SHIFT_RSTn

T1S0 reset control 




enumerator kFLEXSPI0_RST_SHIFT_RSTn

FLEXSPI0 reset control 




enumerator kSPIFILTER0_RST_SHIFT_RSTn

SPIFILTER0 reset control 




enumerator kESPI0_RST_SHIFT_RSTn

ESPI0 reset control 




enumerator kUSB1_RST_SHIFT_RSTn

USB1 reset control 




enumerator kUSB1_PHY_RST_SHIFT_RSTn

USB1_PHY reset control 




enumerator kEWM0_RST_SHIFT_RSTn

EWM0 reset control 




enumerator kGPIO0_RST_SHIFT_RSTn

GPIO0 reset control 




enumerator kGPIO1_RST_SHIFT_RSTn

GPIO1 reset control 




enumerator kGPIO2_RST_SHIFT_RSTn

GPIO2 reset control 




enumerator kGPIO3_RST_SHIFT_RSTn

GPIO3 reset control 




enumerator kGPIO4_RST_SHIFT_RSTn

GPIO4 reset control 




enumerator kSMART_DMA_RST_SHIFT_RSTn

SMARTDMA0 reset control 




enumerator kGLIKEY0_RST_SHIFT_RSTn

GLIKEY0 reset control 




enumerator kPKC0_RST_SHIFT_RSTn

PKC0 reset control 




enumerator kTRNG0_RST_SHIFT_RSTn

TRNG0 reset control 




enumerator kDGDET0_RST_SHIFT_RSTn

DGDET0 reset control 




enumerator kATX0_RST_SHIFT_RSTn

ATX0 reset control 




enumerator NotAvail_RSTn

No reset control 






typedef enum _SYSCON_RSTn SYSCON_RSTn_t

Enumeration for peripheral reset control bits. 
Defines the enumeration for peripheral reset control bits in PRESETCTRL/ASYNCPRESETCTRL registers 




typedef SYSCON_RSTn_t reset_ip_name_t





void RESET_SetPeripheralReset(reset_ip_name_t peripheral)

Assert reset to peripheral. 
Asserts reset signal to specified peripheral module.

Parameters:

peripheral – Assert reset to this peripheral. The enum argument contains encoding of reset register and reset bit position in the reset register. 







void RESET_ClearPeripheralReset(reset_ip_name_t peripheral)

Clear reset to peripheral. 
Clears reset signal to specified peripheral module, allows it to operate.

Parameters:

peripheral – Clear reset to this peripheral. The enum argument contains encoding of reset register and reset bit position in the reset register. 







void RESET_PeripheralReset(reset_ip_name_t peripheral)

Reset peripheral module. 
Reset peripheral module.

Parameters:

peripheral – Peripheral to reset. The enum argument contains encoding of reset register and reset bit position in the reset register. 







static inline void RESET_ReleasePeripheralReset(reset_ip_name_t peripheral)

Release peripheral module. 
Release peripheral module.

Parameters:

peripheral – Peripheral to release. The enum argument contains encoding of reset register and reset bit position in the reset register. 







FSL_RESET_DRIVER_VERSION

reset driver version 2.4.0 




ADC_RSTS

Reset bits for ADC peripheral. 
Array initializers with peripheral reset bits 




ADC_RSTS_N





AOI_RSTS

Reset bits for AOI peripheral. 




AOI_RSTS_N





ATX_RSTS

Reset bits for ATX peripheral. 




ATX_RSTS_N





CRC_RSTS

Reset bits for CRC peripheral. 




CRC_RSTS_N





CTIMER_RSTS

Reset bits for CTIMER peripheral. 




CTIMER_RSTS_N





DAC_RSTS

Reset bits for DAC peripheral. 




DAC_RSTS_N





DGDET_RSTS

Reset bits for DGDET peripheral. 




DGDET_RSTS_N





DMA_RSTS

Reset bits for DMA peripheral. 




DMA_RSTS_N





EIM_RSTS

Reset bits for EIM peripheral. 




EIM_RSTS_N





ENET_RSTS

Reset bits for ENET peripheral. 




ENET_RSTS_N





ERM_RSTS

Reset bits for ERM peripheral. 




ERM_RSTS_N





ESPI_RSTS

Reset bits for ESPI peripheral. 




ESPI_RSTS_N





EWM_RSTS

Reset bits for EWM peripheral. 




EWM_RSTS_N





FLEXCAN_RSTS

Reset bits for FLEXCAN peripheral. 




FLEXCAN_RSTS_N





FLEXIO_RSTS

Reset bits for FLEXIO peripheral. 




FLEXIO_RSTS_N





FLEXSPI_RSTS

Reset bits for FLEXSPI peripheral. 




FLEXSPI_RSTS_N





FREQME_RSTS

Reset bits for FREQME peripheral. 




FREQME_RSTS_N





GLIKEY_RSTS

Reset bits for GLIKEY peripheral. 




GLIKEY_RSTS_N





GPIO_RSTS

Reset bits for GPIO peripheral. 




GPIO_RSTS_N





I3C_RSTS

Reset bits for I3C peripheral. 




I3C_RSTS_N





INPUTMUX_RSTS

Reset bits for INPUTMUX peripheral. 




INPUTMUX_RSTS_N





LPI2C_RSTS

Reset bits for LPI2C peripheral. 




LPI2C_RSTS_N





LPSPI_RSTS

Reset bits for LPSPI peripheral. 




LPSPI_RSTS_N





LPUART_RSTS

Reset bits for LPUART peripheral. 




LPUART_RSTS_N





OSTIMER_RSTS

Reset bits for OSTIMER peripheral. 




OSTIMER_RSTS_N





PKC_RSTS

Reset bits for PKC peripheral. 




PKC_RSTS_N





PORT_RSTS

Reset bits for PORT peripheral. 




PORT_RSTS_N





SMARTDMA_RSTS

Reset bits for SMARTDMA peripheral. 




SMARTDMA_RSTS_N





SPIFILTER_RSTS

Reset bits for SPIFILTER peripheral. 




SPIFILTER_RSTS_N





T1S_RSTS

Reset bits for T1S peripheral. 




T1S_RSTS_N





TENBASET_PHY_RST





TENBASET_PHY_RST_N





TRNG_RSTS

Reset bits for TRNG peripheral. 




TRNG_RSTS_N





USB_RSTS

Reset bits for USB peripheral. 




USB_RSTS_N





USB_PHY_RSTS

Reset bits for USB PHY peripheral. 




USB_PHY_RSTS_N





UTICK_RSTS

Reset bits for UTICK peripheral. 




UTICK_RSTS_N





VREF_RSTS

Reset bits for VREF peripheral. 




VREF_RSTS_N





ROMAPI Driver#


Runbootloader#


void ROMAPI_RunBootloader(void *arg)

Run the Bootloader API to force into the ISP mode base on the user arg. 

Parameters:

arg – Indicates API prototype fields definition. Refer to the above user_app_boot_invoke_option_t structure 







FSL_ROMAPI_RUNBOOTLOADER_DRIVER_VERSION

ROMAPI_RUNBOOTLOADER driver version 2.0.0. 




uint32_t reserved





uint32_t recovery_boot_cfg0





uint32_t recovery_boot_cfg1





uint32_t boot_image_index





uint32_t instance





uint32_t boot_interface





uint32_t mode





uint32_t tag





struct user_app_boot_invoke_option_t B





uint32_t U





union user_app_boot_invoke_option_t option





struct user_app_boot_invoke_option_t





union option


Public Members


struct user_app_boot_invoke_option_t B





uint32_t U








struct B





RUNBOOTLOADER Driver#


MCXN SMARTDMA Firmware#


enum _smartdma_display_api

The API index when using s_smartdmaDisplayFirmware. 
Values:


enumerator kSMARTDMA_FlexIO_DMA







enum _smartdma_camera_api

The API index when using s_smartdmaCameraFirmware. 
Values:


enumerator kSMARTDMA_FlexIO_CameraWholeFrame





enumerator kSMARTDMA_FlexIO_CameraDiv16Frame

Deprecated. Use kSMARTDMA_CameraWholeFrameQVGA instead. 




enumerator kSMARTDMA_CameraWholeFrameQVGA

Deprecated. Use kSMARTDMA_CameraDiv16FrameQVGA instead.
Save whole frame of QVGA(320x240) to buffer in each interrupt in RGB565 format. 




enumerator kSMARTDMA_CameraDiv16FrameQVGA

Save 1/16 frame of QVGA(320x240) to buffer in each interrupt in RGB565 format, takes 16 interrupts to get the whole frame. 




enumerator kSMARTDMA_CameraWholeFrame480_320

Save whole frame of 480x320 to buffer in each interrupt in RGB565 format. 




enumerator kSMARTDMA_CameraDiv4FrameQVGAGrayScale

Save 1/4 frame of QVGA(320x240) to buffer in each interrupt in grayscale format, takes 4 interrupts to get the whole frame. 




enumerator kSMARTDMA_CameraDiv16FrameQVGAGrayScale

Save 1/16 frame of QVGA(320x240) to buffer in each interrupt in grayscale format, takes 16 interrupts to get the whole frame. 




enumerator kSMARTDMA_CameraDiv16Frame384_384

Save 1/16 frame of 384x384 to buffer in each interrupt in grayscale format, takes 16 interrupts to get the whole frame. 




enumerator kSMARTDMA_CameraWholeFrame320_480

Save whole frame of 320x480 to buffer in each interrupt in RGB565 format. 






enum _smartdma_keyscan_api

The API index when using s_smartdmaKeyscanFirmware. 
Values:


enumerator kSMARTDMA_Keyscan_4x4

Using SmartDma to control GPIO. 






typedef struct _smartdma_flexio_mculcd_param smartdma_flexio_mculcd_param_t

Parameter for FlexIO MCULCD. 




typedef struct _smartdma_camera_param smartdma_camera_param_t

Parameter for camera. 




typedef struct _smartdma_keyscan_4x4_param smartdma_keyscan_4x4_param_t

Parameter for keyscan 4x4. 




const uint8_t s_smartdmaDisplayFirmware[]

The firmware used for display. 




const uint32_t s_smartdmaDisplayFirmwareSize

Size of s_smartdmaDisplayFirmware. 




const uint8_t s_smartdmaCameraFirmware[]

The firmware used for camera. 




const uint32_t s_smartdmaCameraFirmwareSize

Size of s_smartdmacameraFirmware. 




const uint8_t s_smartdmaKeyscanFirmware[]

The firmware used for keyscan. 




const uint32_t s_smartdmaKeyscanFirmwareSize

Size of s_smartdmaKeyscanFirmware. 




FSL_SMARTDMA_MCXA_DRIVER_VERSION

SMARTDMA driver version. 




SMARTDMA_DISPLAY_MEM_ADDR

The s_smartdmaDisplayFirmware firmware memory address. 




SMARTDMA_DISPLAY_FIRMWARE_SIZE

Size of s_smartdmaDisplayFirmware. 




SMARTDMA_CAMERA_MEM_ADDR

The s_smartdmaCameraFirmware firmware memory address. 




SMARTDMA_CAMERA_FIRMWARE_SIZE

Size of s_smartdmacameraFirmware. 




SMARTDMA_KEYSCAN_MEM_ADDR

The s_smartdmaKeyscanFirmware firmware memory address. 




SMARTDMA_KEYSCAN_FIRMWARE_SIZE

Size of s_smartdmaKeyscanFirmware. 




uint32_t *p_buffer





uint32_t buffersize





uint32_t *smartdma_stack





uint32_t *smartdma_stack

Stack used by SMARTDMA, shall be at least 64 bytes. 




uint32_t *p_buffer

Buffer to store the received camera data. 




uint32_t *p_stripe_index

Pointer to stripe index. Used when only partial frame is received per interrupt. 




uint32_t *p_buffer_ping_pong

Buffer to store the 2nd stripe of camera data. Used when only partial frame is received per interrupt. 




smartdma_flexio_mculcd_param_t flexioMcuLcdParam

Parameter for flexio MCULCD. 




smartdma_camera_param_t cameraParam

Parameter for camera. 




uint32_t *smartdma_stack

Stack used by SMARTDMA, shall be at least 64 bytes. 




uint32_t *p_gpio_reg

Buffer to provide GPIO register for COL1, COL2, COL3, COL4, ROW1, ROW2, ROW3, ROW4. 




uint32_t *p_keyvalue

Buffer to store key value. 




uint32_t *p_keycan_interval

Delay how many system clock cycles. 




struct _smartdma_flexio_mculcd_param


#include <fsl_smartdma_fw.h>
Parameter for FlexIO MCULCD. 




struct _smartdma_camera_param


#include <fsl_smartdma_fw.h>
Parameter for camera. 




union smartdma_param_t


#include <fsl_smartdma_fw.h>
Parameter for all supported APIs. 




struct _smartdma_keyscan_4x4_param


#include <fsl_smartdma_fw.h>
Parameter for keyscan 4x4. 




TENBASET_PHY: 10BASE-T1S Digital PHY Driver#


enum _tenbaset_phy_mode

TENBASET_PHY operating modes. 
Values:


enumerator kTENBASET_PHY_ModeNone

No mode command 




enumerator kTENBASET_PHY_ModeLinkDown

Link down mode 




enumerator kTENBASET_PHY_ModeLinkUp

Link up mode 




enumerator kTENBASET_PHY_ModeTxcCfg

Transceiver configuration mode 




enumerator kTENBASET_PHY_ModeLowPower

Low power mode 




enumerator kTENBASET_PHY_ModeTxcBist

Transceiver BIST mode 






enum _tenbaset_phy_mode_status

TENBASET_PHY mode status. 
Values:


enumerator kTENBASET_PHY_StatusPorst

Power-on reset state 




enumerator kTENBASET_PHY_StatusWaitInit

Wait for initialization 




enumerator kTENBASET_PHY_StatusLinkDown

Link down state 




enumerator kTENBASET_PHY_StatusLinkUp

Link up state 




enumerator kTENBASET_PHY_StatusWaitCmdLp

Wait for low power command 




enumerator kTENBASET_PHY_StatusLowPower

Low power state 




enumerator kTENBASET_PHY_StatusWaitCmdCfg

Wait for configuration command 




enumerator kTENBASET_PHY_StatusTxcCfg

Transceiver configuration state 




enumerator kTENBASET_PHY_StatusTxcBist

Transceiver BIST state 




enumerator kTENBASET_PHY_StatusWaitSilentLp

Wait silent for low power 




enumerator kTENBASET_PHY_StatusWaitSilentCfg

Wait silent for configuration 






enum _tenbaset_phy_plca_diag_flags

TENBASET_PHY PLCA diagnostic flags. 
Values:


enumerator kTENBASET_PHY_RxInTo

Reception occurred within local transmit opportunity 




enumerator kTENBASET_PHY_UnexpectedBeacon

Reception of unexpected BEACON by coordinator 




enumerator kTENBASET_PHY_BeaconBeforeTo

4 consecutive BEACONs received before TO reached 




enumerator kTENBASET_PHY_UndefinedState

PLCA state-machines in undefined state 




enumerator kTENBASET_PHY_NoRxBeacon

No beacon received by coordinator while transmitted 




enumerator kTENBASET_PHY_LateBeacon

Reception of late BEACON by follower node 




enumerator kTENBASET_PHY_EarlyBeacon

Reception of early BEACON by follower node 






enum _tenbaset_phy_wup_error_code

TENBASET_PHY WUP error codes. 
Values:


enumerator kTENBASET_PHY_WupErrorNone

WUP transmission successful 




enumerator kTENBASET_PHY_WupErrorSwAbort

WUP sequencer aborted by software 




enumerator kTENBASET_PHY_WupErrorModeChg

WUP sequencer aborted by invalid mode 




enumerator kTENBASET_PHY_WupErrorToWm

WUP sequencer aborted by time-out in WAITMODE state 




enumerator kTENBASET_PHY_WupErrorToPd

WUP sequencer aborted by time-out in PENDING state 




enumerator kTENBASET_PHY_WupErrorToWp

WUP sequencer aborted by time-out in PENDING state 




enumerator kTENBASET_PHY_WupErrorToWa

WUP sequencer aborted by time-out in PENDING state 




enumerator kTENBASET_PHY_WupErrorCore

WUP sequencer aborted by core 






enum _tenbaset_phy_wup_status

TENBASET_PHY WUP sequencer status. 
Values:


enumerator kTENBASET_PHY_WupStatusIdle

WUP sequencer is idle 




enumerator kTENBASET_PHY_WupStatusWaitLink

WUP sequencer is waiting for LINKUP mode 




enumerator kTENBASET_PHY_WupStatusPending

WUP sequencer is waiting for transmission slot 






enum _tenbaset_phy_txc_diag_flags

TENBASET_PHY transceiver diagnostic flags. 
Values:


enumerator kTENBASET_PHY_LowPowerFail

Failure of ED/RX pin in LOWPOWER mode 




enumerator kTENBASET_PHY_EdHighFail

Stuck HIGH of the ED pin 




enumerator kTENBASET_PHY_EdLowFail

Stuck LOW of the ED pin 




enumerator kTENBASET_PHY_RxHighFail

Stuck HIGH of the RX pin 




enumerator kTENBASET_PHY_RxLowFail

Stuck LOW of the RX pin 






enum _tenbaset_phy_interrupt_flags

TENBASET_PHY interrupt flags. 
Values:


enumerator kTENBASET_PHY_PhysicalCollisionFlag

Physical collision interrupt 




enumerator kTENBASET_PHY_PLCARecoveryFlag

PLCA recovery interrupt 




enumerator kTENBASET_PHY_PLCAStatusFlag

PLCA status interrupt 




enumerator kTENBASET_PHY_ModeStatusFlag

Mode status interrupt 




enumerator kTENBASET_PHY_InvalidAPBFlag

Invalid APB interrupt 




enumerator kTENBASET_PHY_LocalJabberFlag

Local jabber interrupt 




enumerator kTENBASET_PHY_RemoteJabberFlag

Remote jabber interrupt 




enumerator kTENBASET_PHY_PinFaultFlag

Pin fault interrupt 




enumerator kTENBASET_PHY_PLCADiagFlag

PLCA diagnostics interrupt 




enumerator kTENBASET_PHY_SMIAccessFlag

SMI access interrupt 




enumerator kTENBASET_PHY_LocalWakeFlag

Local wake interrupt 




enumerator kTENBASET_PHY_SuspendDetectFlag

Suspend detect interrupt 




enumerator kTENBASET_PHY_WUTDetectFlag

WUT detect interrupt 




enumerator kTENBASET_PHY_WUPDoneFlag

WUP done interrupt 




enumerator kTENBASET_PHY_APBParityFlag

APB parity interrupt 






enum _tenbaset_phy_smi_operation

SMI operation types. 
Values:


enumerator kTENBASET_PHY_SMIWriteWithCompError

Write frame with C22 compliance error 




enumerator kTENBASET_PHY_SMIWrite

Standard write frame operation 




enumerator kTENBASET_PHY_SMIRead

Standard read frame operation 




enumerator kTENBASET_PHY_SMIReadWithCompError

Read frame with C22 compliance error 






enum _tenbaset_phy_smi_hold_time

SMI MDIO hold time options. 
Values:


enumerator kTENBASET_PHY_SMIHold1Cycle

1 PCLK cycle 




enumerator kTENBASET_PHY_SMIHold2Cycles

2 PCLK cycles 




enumerator kTENBASET_PHY_SMIHold3Cycles

3 PCLK cycles 




enumerator kTENBASET_PHY_SMIHold4Cycles

4 PCLK cycles 




enumerator kTENBASET_PHY_SMIHold5Cycles

5 PCLK cycles 




enumerator kTENBASET_PHY_SMIHold6Cycles

6 PCLK cycles 




enumerator kTENBASET_PHY_SMIHold7Cycles

7 PCLK cycles 




enumerator kTENBASET_PHY_SMIHold8Cycles

8 PCLK cycles 






enum _tenbaset_phy_smi_error_code

SMI error codes. 
Values:


enumerator kTENBASET_PHY_SMIErrorNone

SMI access successful 




enumerator kTENBASET_PHY_SMIErrorNonTC14

Non-compliancy with TC14 detected 




enumerator kTENBASET_PHY_SMIErrorDisabled

SMI access triggered while disabled 




enumerator kTENBASET_PHY_SMIErrorAborted

SMI access got aborted 




enumerator kTENBASET_PHY_SMIErrorInProgress

SMI access triggered while in progress 






typedef enum _tenbaset_phy_mode tenbaset_phy_mode_t

TENBASET_PHY operating modes. 




typedef enum _tenbaset_phy_mode_status tenbaset_phy_mode_status_t

TENBASET_PHY mode status. 




typedef struct _tenbaset_phy_plca_config tenbaset_phy_plca_config_t

TENBASET_PHY PLCA configuration structure. 




typedef struct _tenbaset_phy_pma_config tenbaset_phy_pma_config_t

PMA configuration structure. 




typedef struct _tenbaset_phy_pcs_config tenbaset_phy_pcs_config_t

PCS configuration structure. 




typedef struct _tenbaset_phy_wake_config tenbaset_phy_wake_config_t

TENBASET_PHY wake configuration structure. 




typedef enum _tenbaset_phy_wup_error_code tenbaset_phy_wup_error_code_t

TENBASET_PHY WUP error codes. 




typedef enum _tenbaset_phy_wup_status tenbaset_phy_wup_status_t

TENBASET_PHY WUP sequencer status. 




typedef struct _tenbaset_phy_wup_status_info tenbaset_phy_wup_status_info_t

TENBASET_PHY WUP status structure. 




typedef struct _tenbaset_phy_version_info tenbaset_phy_version_info_t

TENBASET_PHY version information structure. 




typedef enum _tenbaset_phy_smi_operation tenbaset_phy_smi_operation_t

SMI operation types. 




typedef enum _tenbaset_phy_smi_hold_time tenbaset_phy_smi_hold_time_t

SMI MDIO hold time options. 




typedef struct _tenbaset_phy_smi_config tenbaset_phy_smi_config_t

SMI configuration structure. 




typedef enum _tenbaset_phy_smi_error_code tenbaset_phy_smi_error_code_t

SMI error codes. 




typedef void (*tenbaset_phy_callback_t)(TENBASET_PHY_Type *base, uint16_t flags, void *userData)

TENBASET_PHY callback function type. 




typedef struct _tenbaset_phy_config tenbaset_phy_config_t

TENBASET_PHY configuration structure. 




typedef struct _tenbaset_phy_handle tenbaset_phy_handle_t

TENBASET_PHY handle structure. 




FSL_TENBASET_PHY_DRIVER_VERSION

TENBASET_PHY driver version. 




TENBASET_PHY_PLCADIAG1_FLAG(flag)





TENBASET_PHY_PLCADIAG2_FLAG(flag)





TENBASET_PHY_PLCADIAG1_FLAG_TO_REG(flag)





TENBASET_PHY_PLCADIAG2_FLAG_TO_REG(flag)





void TENBASET_PHY_GetDefaultConfig(tenbaset_phy_config_t *config)

Gets the default configuration structure. 
This function initializes the TENBASET_PHY configuration structure to default values. The default values are: 
config->plcaConfig.nodeId        = 0xFFU;
config->plcaConfig.nodeCount     = 0x08U;
config->plcaConfig.toTimer       = 0x20U;
config->plcaConfig.burstTimer    = 0x80U;
config->plcaConfig.maxBurstCount = 0U;
config->plcaConfig.enable        = false;
config->wakeConfig.suspendWakeEnable       = true;
config->wakeConfig.remoteWakeEnable        = true;
config->wakeConfig.localWakeEnable         = true;
config->wakeConfig.remoteWakeForwardEnable = true;
config->wakeConfig.localWakeWupEnable      = true;
config->wakeConfig.wupTimeout              = 0xFFU;
config->interruptMask = 0U;




Parameters:

config – Pointer to the TENBASET_PHY configuration structure. 







void TENBASET_PHY_CreateHandle(TENBASET_PHY_Type *base, tenbaset_phy_handle_t *handle, tenbaset_phy_callback_t callback, void *userData)

Initializes driver handle for TENBASET_PHY instance. 
This function initializes the handle with the provided data.

Parameters:

base – TENBASET_PHY peripheral base address. 
handle – Pointer to the TENBASET_PHY handle structure. 
callback – Pointer to the callback function called from ISR. 
userData – Pointer to the user data (passed to the callback). 







status_t TENBASET_PHY_Init(TENBASET_PHY_Type *base, const tenbaset_phy_config_t *config, tenbaset_phy_handle_t *handle)

Initializes the TENBASET_PHY peripheral. 
This function initializes the TENBASET_PHY peripheral with the provided configuration.

Parameters:

base – TENBASET_PHY peripheral base address. 
config – Pointer to the TENBASET_PHY configuration structure. 
handle – Pointer to the TENBASET_PHY handle structure. 


Return values:

kStatus_Success – Initialization successful. 
kStatus_Timeout – Initialization timeout. 
kStatus_Fail – PLCA configuration error. 







void TENBASET_PHY_Deinit(TENBASET_PHY_Type *base, tenbaset_phy_handle_t *handle)

Deinitializes the TENBASET_PHY peripheral. 

Parameters:

base – TENBASET_PHY peripheral base address. 
handle – Pointer to the TENBASET_PHY handle structure. 







status_t TENBASET_PHY_SetMode(TENBASET_PHY_Type *base, tenbaset_phy_mode_t mode)

Sets the TENBASET_PHY operating mode. 

Parameters:

base – TENBASET_PHY peripheral base address. 
mode – Target operating mode. 


Return values:

kStatus_Success – Mode set successfully. 
kStatus_Timeout – Mode transition timeout. 
kStatus_InvalidArgument – Invalid mode transition. 







tenbaset_phy_mode_status_t TENBASET_PHY_GetModeStatus(TENBASET_PHY_Type *base)

Gets the current TENBASET_PHY mode status. 

Parameters:

base – TENBASET_PHY peripheral base address. 


Returns:
Current mode status. 






bool TENBASET_PHY_IsLinkUp(TENBASET_PHY_Type *base)

Checks if the link is up. 

Parameters:

base – TENBASET_PHY peripheral base address. 


Returns:
true if link is up, false otherwise. 






void TENBASET_PHY_GetPLCAConfig(TENBASET_PHY_Type *base, tenbaset_phy_plca_config_t *config)

Retrieves the current Physical Layer Collision Avoidance (PLCA) configuration. 
This function reads the current PLCA settings from the registers, including node ID, node count, timers, and PLCA enable status.

Parameters:

base – TENBASET_PHY peripheral base address 
config – Pointer to store the current PLCA configuration 







status_t TENBASET_PHY_SetPLCAConfig(TENBASET_PHY_Type *base, const tenbaset_phy_plca_config_t *config)

Configures PLCA settings. 

Parameters:

base – TENBASET_PHY peripheral base address. 
config – Pointer to PLCA configuration structure. 


Return values:

kStatus_Success – PLCA configured successfully. 
kStatus_Fail – PLCA configuration error. 







bool TENBASET_PHY_GetPLCAStatus(TENBASET_PHY_Type *base)

Gets PLCA status. 

Parameters:

base – TENBASET_PHY peripheral base address. 


Returns:
PLCA node status. 






uint32_t TENBASET_PHY_GetPLCADiagnosticFlags(TENBASET_PHY_Type *base)

Gets PLCA diagnostic flags. 

Parameters:

base – TENBASET_PHY peripheral base address. 


Returns:
diagnostic flags (combination of _tenbaset_phy_plca_diag_flags). 






void TENBASET_PHY_ClearPLCADiagnosticFlags(TENBASET_PHY_Type *base, uint32_t diagFlags)

Clears PLCA diagnostic flags. 

Parameters:

base – TENBASET_PHY peripheral base address. 
diagFlags – Flags to clear (combination of _tenbaset_phy_plca_diag_flags). 







uint16_t TENBASET_PHY_GetBeaconCounter(TENBASET_PHY_Type *base)

Gets PLCA beacon counter. 

Parameters:

base – TENBASET_PHY peripheral base address. 


Returns:
RX beacon counter value. 






void TENBASET_PHY_ClearBeaconCounter(TENBASET_PHY_Type *base)

Clears PLCA beacon counter. 

Parameters:

base – TENBASET_PHY peripheral base address. 







uint16_t TENBASET_PHY_GetTransmitOpportunityCounter(TENBASET_PHY_Type *base)

Gets PLCA transmit opportunity counter. 

Parameters:

base – TENBASET_PHY peripheral base address. 


Returns:
Transmit opportunity counter value. 






void TENBASET_PHY_ClearTransmitOpportunityCounter(TENBASET_PHY_Type *base)

Clears PLCA transmit opportunity counter. 

Parameters:

base – TENBASET_PHY peripheral base address. 







void TENBASET_PHY_GetPMAConfig(TENBASET_PHY_Type *base, tenbaset_phy_pma_config_t *config)

Retrieves the current PMA configuration. 
Reads the PMA control register and populates the configuration structure.

Parameters:

base – TENBASET_PHY peripheral base address 
config – Pointer to store PMA configuration 







void TENBASET_PHY_SetPMAConfig(TENBASET_PHY_Type *base, const tenbaset_phy_pma_config_t *config)

Configures the PMA operation. 
Writes to the PMA control register to set reset, transmission, and loopback modes.

Parameters:

base – TENBASET_PHY peripheral base address 
config – Pointer to PMA configuration 







void TENBASET_PHY_GetPCSConfig(TENBASET_PHY_Type *base, tenbaset_phy_pcs_config_t *config)

Retrieves the current PCS configuration. 
Reads the PCS control register and populates the configuration structure.

Parameters:

base – TENBASET_PHY peripheral base address 
config – Pointer to store PCS configuration 







void TENBASET_PHY_SetPCSConfig(TENBASET_PHY_Type *base, const tenbaset_phy_pcs_config_t *config)

Configures the PCS operation. 
Writes to the PCS control register to set reset and loopback modes.

Parameters:

base – TENBASET_PHY peripheral base address 
config – Pointer to PCS configuration 







uint16_t TENBASET_PHY_GetRemoteJabberCounter(TENBASET_PHY_Type *base)

Gets PCS remote jabber counter. 

Parameters:

base – TENBASET_PHY peripheral base address. 


Returns:
Remote jabber counter value. 






uint16_t TENBASET_PHY_GetCollisionCounter(TENBASET_PHY_Type *base)

Gets PCS physical collision counter. 

Parameters:

base – TENBASET_PHY peripheral base address. 


Returns:
Physical collision counter value. 






void TENBASET_PHY_SetWakeConfig(TENBASET_PHY_Type *base, const tenbaset_phy_wake_config_t *config)

Configures wake settings. 

Parameters:

base – TENBASET_PHY peripheral base address. 
config – Pointer to wake configuration structure. 







void TENBASET_PHY_TriggerWakeForward(TENBASET_PHY_Type *base)

Triggers a wake-forward pulse. 
This function commands the TENBASET_PHY PHY to generate a wake-forward pulse.

Parameters:

base – TENBASET_PHY peripheral base address. 







void TENBASET_PHY_TriggerWakeUp(TENBASET_PHY_Type *base)

Triggers WUP sequencer transmission. 

Parameters:

base – TENBASET_PHY peripheral base address. 







void TENBASET_PHY_AbortWakeUp(TENBASET_PHY_Type *base)

Aborts WUP sequencer when pending. 

Parameters:

base – TENBASET_PHY peripheral base address. 







void TENBASET_PHY_GetWakeUpStatus(TENBASET_PHY_Type *base, tenbaset_phy_wup_status_info_t *statusInfo)

Gets WUP status information. 

Parameters:

base – TENBASET_PHY peripheral base address. 
statusInfo – Pointer to structure to store WUP status information. 







void TENBASET_PHY_EnableInterrupts(TENBASET_PHY_Type *base, uint16_t mask)

Enables TENBASET_PHY interrupts of functional events to the MCU. 

Parameters:

base – TENBASET_PHY peripheral base address. 
mask – Interrupt mask (combination of _tenbaset_phy_interrupt_flags). 







void TENBASET_PHY_DisableInterrupts(TENBASET_PHY_Type *base, uint16_t mask)

Disables TENBASET_PHY interrupts of functional events to the MCU. 

Parameters:

base – TENBASET_PHY peripheral base address. 
mask – Interrupt mask (combination of _tenbaset_phy_interrupt_flags). 







uint16_t TENBASET_PHY_GetInterruptStatus(TENBASET_PHY_Type *base)

Gets interrupt status flags of functional events to the MCU. 

Parameters:

base – TENBASET_PHY peripheral base address. 


Returns:
Interrupt status flags. 






void TENBASET_PHY_ClearInterruptStatus(TENBASET_PHY_Type *base, uint16_t mask)

Clears interrupt status flags of functional events to the MCU. 

Parameters:

base – TENBASET_PHY peripheral base address. 
mask – Interrupt flags to clear. 







void TENBASET_PHY_EnableInterrupts2(TENBASET_PHY_Type *base, uint16_t mask)

Enables TENBASET_PHY interrupts of safety related events to the Fault Collection and Control Unit (FCCU). 

Parameters:

base – TENBASET_PHY peripheral base address. 
mask – Interrupt mask (combination of _tenbaset_phy_interrupt_flags). 







void TENBASET_PHY_DisableInterrupts2(TENBASET_PHY_Type *base, uint16_t mask)

Disables TENBASET_PHY interrupts of safety related events to the Fault Collection and Control Unit (FCCU). 

Parameters:

base – TENBASET_PHY peripheral base address. 
mask – Interrupt mask (combination of _tenbaset_phy_interrupt_flags). 







uint16_t TENBASET_PHY_GetInterruptStatus2(TENBASET_PHY_Type *base)

Gets interrupt status flags of safety related events to the Fault Collection and Control Unit (FCCU). 

Parameters:

base – TENBASET_PHY peripheral base address. 


Returns:
Interrupt status flags. 






void TENBASET_PHY_ClearInterruptStatus2(TENBASET_PHY_Type *base, uint16_t mask)

Clears interrupt status flags of safety related events to the Fault Collection and Control Unit (FCCU). 

Parameters:

base – TENBASET_PHY peripheral base address. 
mask – Interrupt flags to clear. 







uint32_t TENBASET_PHY_GetPhyId(TENBASET_PHY_Type *base)

Gets PHY identifier. 

Parameters:

base – TENBASET_PHY peripheral base address. 


Returns:
OUI part of the 32-bit PHY identifier. 






void TENBASET_PHY_GetVersionInfo(TENBASET_PHY_Type *base, tenbaset_phy_version_info_t *versionInfo)

Gets version information. 

Parameters:

base – TENBASET_PHY peripheral base address. 
versionInfo – Pointer to structure to store version information. 







uint16_t TENBASET_PHY_GetTransceiverDiagnosticFlags(TENBASET_PHY_Type *base)

Gets transceiver diagnostic flags. 

Parameters:

base – TENBASET_PHY peripheral base address. 


Returns:
Diagnostic flags (combination of _tenbaset_phy_txc_diag_flags). 






void TENBASET_PHY_ClearTransceiverDiagnosticFlags(TENBASET_PHY_Type *base, uint16_t diagFlags)

Clears transceiver diagnostic flags. 

Parameters:

base – TENBASET_PHY peripheral base address. 
diagFlags – Flags to clear (combination of _tenbaset_phy_txc_diag_flags). 







status_t TENBASET_PHY_SetSMIConfig(TENBASET_PHY_Type *base, const tenbaset_phy_smi_config_t *config)

Configures the SMI (Serial Management Interface) parameters. 
This function sets up the SMI interface configuration, including:

MDIO hold time
Preamble generation
MDC clock frequency



Parameters:

base – TENBASET_PHY peripheral base address 
config – Pointer to SMI configuration structure 


Returns:
status_t Operation status

kStatus_Success: Configuration successful
kStatus_InvalidArgument: Invalid speed parameter 








bool TENBASET_PHY_GetSMIStatus(TENBASET_PHY_Type *base, tenbaset_phy_smi_error_code_t *errorCode)

Retrieves the current SMI status. 
Checks if the SMI is ready and optionally retrieves the current error code.

Parameters:

base – TENBASET_PHY peripheral base address 
errorCode – Pointer to store error code (can be NULL if error code not needed) 


Returns:
bool

true: SMI is ready
false: SMI is not ready 








status_t TENBASET_PHY_SMIRead(TENBASET_PHY_Type *base, uint8_t phyAddr, uint8_t regAddr, uint16_t *data)

Reads a register from an external PMD transceiver via SMI. 
Performs an SMI read operation with timeout handling.

Parameters:

base – TENBASET_PHY peripheral base address 
phyAddr – PHY address of PMD transceiver 
regAddr – Register address to read 
data – Pointer to store the read register value 


Returns:
status_t Operation status

kStatus_Success: Read successful
kStatus_Timeout: SMI not ready within timeout period 








status_t TENBASET_PHY_SMIWrite(TENBASET_PHY_Type *base, uint8_t phyAddr, uint8_t regAddr, uint16_t data)

Writes a register to an external PMD transceiver via SMI. 
Performs an SMI write operation with timeout handling.

Parameters:

base – TENBASET_PHY peripheral base address 
phyAddr – PHY address of PMD transceiver 
regAddr – Register address to write 
data – Value to write to the register 


Returns:
status_t Operation status

kStatus_Success: Write successful
kStatus_Timeout: SMI not ready within timeout period 








struct _tenbaset_phy_plca_config


#include <fsl_tenbaset_phy.h>
TENBASET_PHY PLCA configuration structure. 

Public Members


uint8_t nodeId

PLCA node identifier 




uint8_t nodeCount

Total number of nodes in network 




uint8_t toTimer

Transmit opportunity timer value 




uint8_t burstTimer

Burst timer value 




uint8_t maxBurstCount

Maximum burst count 




bool enable

Enable PLCA 







struct _tenbaset_phy_pma_config


#include <fsl_tenbaset_phy.h>
PMA configuration structure. 

Public Members


bool resetEnable

Reset the PMA and PCS layers 




bool transmissionEnable

Enable transmission 




bool loopbackEnable

Enable PMA loopback mode 







struct _tenbaset_phy_pcs_config


#include <fsl_tenbaset_phy.h>
PCS configuration structure. 

Public Members


bool resetEnable

Reset the PCS layer 




bool loopbackEnable

Enable PCS loopback mode 







struct _tenbaset_phy_wake_config


#include <fsl_tenbaset_phy.h>
TENBASET_PHY wake configuration structure. 

Public Members


bool suspendWakeEnable

Enable wake-up to WAITINIT mode by SUSPEND detection 




bool remoteWakeEnable

Enable wake-up to WAITINIT mode by remote-wake-event 




bool localWakeEnable

Enable wake-up to WAITINIT mode by local-wake-event 




bool remoteWakeForwardEnable

Enable wake forwarding of a remote-wake-event 




bool localWakeWupEnable

Enable WUP transmission by local-wake-event 




uint8_t wupTimeout

WUP timeout value (WUP time-out = (WUPTIMEOUT + 1) * 10ms) 







struct _tenbaset_phy_wup_status_info


#include <fsl_tenbaset_phy.h>
TENBASET_PHY WUP status structure. 

Public Members


tenbaset_phy_wup_status_t status

WUP sequencer status 




tenbaset_phy_wup_error_code_t errorCode

Error code of previous WUP sequence 







struct _tenbaset_phy_version_info


#include <fsl_tenbaset_phy.h>
TENBASET_PHY version information structure. 

Public Members


uint8_t majorVersion

Major version number 




uint8_t minorVersion

Minor version number 




uint8_t customerVersion

Customer version number 







struct _tenbaset_phy_smi_config


#include <fsl_tenbaset_phy.h>
SMI configuration structure. 

Public Members


tenbaset_phy_smi_hold_time_t holdTime

MDIO hold time 




bool preambleEnable

Enable SMI preamble generation 




uint8_t speed

MDC clock frequency divisor (0-63) 







struct _tenbaset_phy_config


#include <fsl_tenbaset_phy.h>
TENBASET_PHY configuration structure. 

Public Members


tenbaset_phy_plca_config_t plcaConfig

PLCA configuration 




tenbaset_phy_wake_config_t wakeConfig

Wake configuration 




uint16_t interruptMask

Mask of enabled interrupts 







struct _tenbaset_phy_handle


#include <fsl_tenbaset_phy.h>
TENBASET_PHY handle structure. 

Public Members


tenbaset_phy_callback_t callback

Callback function 




void *userData

User data for callback 




bool initialized

Initialization status 







TRDC: Trusted Resource Domain Controller#


void TRDC_Init(TRDC_Type *base)

Initializes the TRDC module. 
This function enables the TRDC clock.

Parameters:

base – TRDC peripheral base address. 







void TRDC_Deinit(TRDC_Type *base)

De-initializes the TRDC module. 
This function disables the TRDC clock.

Parameters:

base – TRDC peripheral base address. 







static inline uint8_t TRDC_GetCurrentMasterDomainId(TRDC_Type *base)

Gets the domain ID of the current bus master. 

Parameters:

base – TRDC peripheral base address. 


Returns:
Domain ID of current bus master. 






void TRDC_GetHardwareConfig(TRDC_Type *base, trdc_hardware_config_t *config)

Gets the TRDC hardware configuration. 
This function gets the TRDC hardware configurations, including number of bus masters, number of domains, number of MRCs and number of PACs.

Parameters:

base – TRDC peripheral base address. 
config – Pointer to the structure to get the configuration. 







static inline void TRDC_SetDacGlobalValid(TRDC_Type *base)

Sets the TRDC DAC(Domain Assignment Controllers) global valid. 
Once enabled, it will remain enabled until next reset.

Parameters:

base – TRDC peripheral base address. 







static inline void TRDC_LockMasterDomainAssignment(TRDC_Type *base, uint8_t master, uint8_t regNum)

Locks the bus master domain assignment register. 
This function locks the master domain assignment. After it is locked, the register can’t be changed until next reset.

Parameters:

base – TRDC peripheral base address. 
master – Which master to configure, refer to trdcx_master_t in processor header file, x is trdc instance. 
regNum – Which register to configure, processor master can have more than one register for the MDAC configuration. 
assignIndex – Which assignment register to lock. 







static inline void TRDC_SetMasterDomainAssignmentValid(TRDC_Type *base, uint8_t master, uint8_t regNum, bool valid)

Sets the master domain assignment as valid or invalid. 
This function sets the master domain assignment as valid or invalid.

Parameters:

base – TRDC peripheral base address. 
master – Which master to configure. 
regNum – Which register to configure, processor master can have more than one register for the MDAC configuration. 
assignIndex – Index for the domain assignment register. 
valid – True to set valid, false to set invalid. 







void TRDC_GetDefaultProcessorDomainAssignment(trdc_processor_domain_assignment_t *domainAssignment)

Gets the default master domain assignment for the processor bus master. 
This function gets the default master domain assignment for the processor bus master. It should only be used for the processor bus masters, such as CORE0. This function sets the assignment as follows:
assignment->domainId           = 0U;
assignment->domainIdSelect     = kTRDC_DidMda;
assignment->lock               = 0U;



Parameters:

domainAssignment – Pointer to the assignment structure. 







void TRDC_GetDefaultNonProcessorDomainAssignment(trdc_non_processor_domain_assignment_t *domainAssignment)

Gets the default master domain assignment for non-processor bus master. 
This function gets the default master domain assignment for non-processor bus master. It should only be used for the non-processor bus masters, such as DMA. This function sets the assignment as follows:
assignment->domainId            = 0U;
assignment->privilegeAttr       = kTRDC_ForceUser;
assignment->secureAttr       = kTRDC_ForceSecure;
assignment->bypassDomainId      = 0U;
assignment->lock                = 0U;



Parameters:

domainAssignment – Pointer to the assignment structure. 







void TRDC_SetProcessorDomainAssignment(TRDC_Type *base, uint8_t master, uint8_t regNum, const trdc_processor_domain_assignment_t *domainAssignment)

Sets the processor bus master domain assignment. 
This function sets the processor master domain assignment as valid. One bus master might have multiple domain assignment registers. The parameter assignIndex specifies which assignment register to set.
Example: Set domain assignment for core 0.
trdc_processor_domain_assignment_t processorAssignment;

TRDC_GetDefaultProcessorDomainAssignment(&processorAssignment);

processorAssignment.domainId = 0;
processorAssignment.xxx      = xxx;
TRDC_SetMasterDomainAssignment(TRDC, &processorAssignment);



Parameters:

base – TRDC peripheral base address. 
master – Which master to configure, refer to trdc_master_t in processor header file. 
regNum – Which register to configure, processor master can have more than one register for the MDAC configuration. 
domainAssignment – Pointer to the assignment structure. 







void TRDC_SetNonProcessorDomainAssignment(TRDC_Type *base, uint8_t master, const trdc_non_processor_domain_assignment_t *domainAssignment)

Sets the non-processor bus master domain assignment. 
This function sets the non-processor master domain assignment as valid. One bus master might have multiple domain assignment registers. The parameter assignIndex specifies which assignment register to set.
Example: Set domain assignment for DMA0. 
trdc_non_processor_domain_assignment_t nonProcessorAssignment;

TRDC_GetDefaultNonProcessorDomainAssignment(&nonProcessorAssignment);
nonProcessorAssignment.domainId = 1;
nonProcessorAssignment.xxx      = xxx;

TRDC_SetMasterDomainAssignment(TRDC, kTrdcMasterDma0, 0U, &nonProcessorAssignment);




Parameters:

base – TRDC peripheral base address. 
master – Which master to configure, refer to trdc_master_t in processor header file. 
domainAssignment – Pointer to the assignment structure. 







static inline uint64_t TRDC_GetActiveMasterPidMap(TRDC_Type *base)

Gets the bit map of the bus master(s) that is(are) sourcing a PID register. 
This function sets the non-processor master domain assignment as valid.

Parameters:

base – TRDC peripheral base address. 


Returns:
the bit map of the master(s). Bit 1 sets indicates bus master 1. 






void TRDC_SetPid(TRDC_Type *base, uint8_t master, const trdc_pid_config_t *pidConfig)

Sets the current Process identifier(PID) for processor core. 
Each processor has a corresponding process identifier (PID) which can be used to group tasks into different domains. Secure privileged software saves and restores the PID as part of any context switch. This data structure defines an array of 32-bit values, one per MDA module, that define the PID. Since this register resource is only applicable to processor cores, the data structure is typically sparsely populated. The HWCFG[2-3] registers provide a bitmap of the implemented PIDn registers. This data structure is indexed using the corresponding MDA instance number. Depending on the operating clock domain of each DAC instance, there may be optional information stored in the corresponding PIDm register to properly implement the LK2 = 2 functionality.

Parameters:

base – TRDC peripheral base address. 
master – Which processor master to configure, refer to trdc_master_t in processor header file. 
pidConfig – Pointer to the configuration structure. 







void TRDC_GetDefaultIDAUConfig(trdc_idau_config_t *idauConfiguration)

Gets the default IDAU(Implementation-Defined Attribution Unit) configuration. 
config->lockSecureVTOR    = false;
config->lockNonsecureVTOR = false;
config->lockSecureMPU     = false;
config->lockNonsecureMPU  = false;
config->lockSAU           = false;



Parameters:

domainAssignment – Pointer to the configuration structure. 







void TRDC_SetIDAU(TRDC_Type *base, const trdc_idau_config_t *idauConfiguration)

Sets the IDAU(Implementation-Defined Attribution Unit) control configuration. 
Example: Lock the secure and non-secure MPU registers.
trdc_idau_config_t idauConfiguration;

TRDC_GetDefaultIDAUConfig(&idauConfiguration);

idauConfiguration.lockSecureMPU = true;
idauConfiguration.lockNonsecureMPU      = true;
TRDC_SetIDAU(TRDC, &idauConfiguration);



Parameters:

base – TRDC peripheral base address. 
domainAssignment – Pointer to the configuration structure. 







static inline void TRDC_EnableFlashLogicalWindow(TRDC_Type *base, bool enable)

Enables/disables the FLW(flash logical window) function. 

Parameters:

base – TRDC peripheral base address. 
enable – True to enable, false to disable. 







static inline void TRDC_LockFlashLogicalWindow(TRDC_Type *base)

Locks FLW registers. Once locked the registers can noy be updated until next reset. 

Parameters:

base – TRDC peripheral base address. 







static inline uint32_t TRDC_GetFlashLogicalWindowPbase(TRDC_Type *base)

Gets the FLW physical base address. 

Parameters:

base – TRDC peripheral base address. 


Returns:
Physical address of the FLW function. 






static inline void TRDC_GetSetFlashLogicalWindowSize(TRDC_Type *base, uint16_t size)

Sets the FLW size. 

Parameters:

base – TRDC peripheral base address. 
size – Size of the FLW in unit of 32k bytes. 







void TRDC_GetDefaultFlashLogicalWindowConfig(trdc_flw_config_t *flwConfiguration)

Gets the default FLW(Flsh Logical Window) configuration. 
config->blockCount    = false;
config->arrayBaseAddr = false;
config->lock     = false;
config->enable  = false;



Parameters:

flwConfiguration – Pointer to the configuration structure. 







void TRDC_SetFlashLogicalWindow(TRDC_Type *base, const trdc_flw_config_t *flwConfiguration)

Sets the FLW function’s configuration. 
trdc_flw_config_t flwConfiguration;

TRDC_GetDefaultIDAUConfig(&flwConfiguration);

flwConfiguration.blockCount = 32U;
flwConfiguration.arrayBaseAddr = 0xXXXXXXXX;
TRDC_SetIDAU(TRDC, &flwConfiguration);



Parameters:

base – TRDC peripheral base address. 
flwConfiguration – Pointer to the configuration structure. 







status_t TRDC_GetAndClearFirstDomainError(TRDC_Type *base, trdc_domain_error_t *error)

Gets and clears the first domain error of the current domain. 
This function gets the first access violation information for the current domain and clears the pending flag. There might be multiple access violations pending for the current domain. This function only processes the first error.

Parameters:

base – TRDC peripheral base address. 
error – Pointer to the error information. 


Returns:
If the access violation is captured, this function returns the kStatus_Success. The error information can be obtained from the parameter error. If no access violation is captured, this function returns the kStatus_NoData. 






status_t TRDC_GetAndClearFirstSpecificDomainError(TRDC_Type *base, trdc_domain_error_t *error, uint8_t domainId)

Gets and clears the first domain error of the specific domain. 
This function gets the first access violation information for the specific domain and clears the pending flag. There might be multiple access violations pending for the current domain. This function only processes the first error.

Parameters:

base – TRDC peripheral base address. 
error – Pointer to the error information. 
domainId – The error of which domain to get and clear. 


Returns:
If the access violation is captured, this function returns the kStatus_Success. The error information can be obtained from the parameter error. If no access violation is captured, this function returns the kStatus_NoData. 






static inline void TRDC_SetMrcGlobalValid(TRDC_Type *base)

Sets the TRDC MRC(Memory Region Checkers) global valid. 
Once enabled, it will remain enabled until next reset.

Parameters:

base – TRDC peripheral base address. 







static inline uint8_t TRDC_GetMrcRegionNumber(TRDC_Type *base, uint8_t mrcIdx)

Gets the TRDC MRC(Memory Region Checkers) region number valid. 

Parameters:

base – TRDC peripheral base address. 


Returns:
the region number of the given MRC instance 






void TRDC_MrcSetMemoryAccessConfig(TRDC_Type *base, const trdc_memory_access_control_config_t *config, uint8_t mrcIdx, uint8_t regIdx)

Sets the memory access configuration for one of the access control register of one MRC. 
Example: Enable the secure operations and lock the configuration for MRC0 region 1.
trdc_memory_access_control_config_t config;

config.securePrivX = true;
config.securePrivW = true;
config.securePrivR = true;
config.lock = true;
TRDC_SetMrcMemoryAccess(TRDC, &config, 0, 1);



Parameters:

base – TRDC peripheral base address. 
config – Pointer to the configuration structure. 
mrcIdx – MRC index. 
regIdx – Register number. 







void TRDC_MrcEnableDomainNseUpdate(TRDC_Type *base, uint8_t mrcIdx, uint16_t domianMask, bool enable)

Enables the update of the selected domians. 
After the domians’ update are enabled, their regions’ NSE bits can be set or clear.

Parameters:

base – TRDC peripheral base address. 
mrcIdx – MRC index. 
domianMask – Bit mask of the domains to be enabled. 
enable – True to enable, false to disable. 







void TRDC_MrcRegionNseSet(TRDC_Type *base, uint8_t mrcIdx, uint16_t regionMask)

Sets the NSE bits of the selected regions for domains. 
This function sets the NSE bits for the selected regions for the domains whose update are enabled.

Parameters:

base – TRDC peripheral base address. 
mrcIdx – MRC index. 
regionMask – Bit mask of the regions whose NSE bits to set. 







void TRDC_MrcRegionNseClear(TRDC_Type *base, uint8_t mrcIdx, uint16_t regionMask)

Clears the NSE bits of the selected regions for domains. 
This function clears the NSE bits for the selected regions for the domains whose update are enabled.

Parameters:

base – TRDC peripheral base address. 
mrcIdx – MRC index. 
regionMask – Bit mask of the regions whose NSE bits to clear. 







void TRDC_MrcDomainNseClear(TRDC_Type *base, uint8_t mrcIdx, uint16_t domainMask)

Clears the NSE bits for all the regions of the selected domains. 
This function clears the NSE bits for all regions of selected domains whose update are enabled.

Parameters:

base – TRDC peripheral base address. 
mrcIdx – MRC index. 
domainMask – Bit mask of the domians whose NSE bits to clear. 







void TRDC_MrcSetRegionDescriptorConfig(TRDC_Type *base, const trdc_mrc_region_descriptor_config_t *config)

Sets the configuration for one of the region descriptor per domain per MRC instnce. 
This function sets the configuration for one of the region descriptor, including the start and end address of the region, memory access control policy and valid.

Parameters:

base – TRDC peripheral base address. 
config – Pointer to region descriptor configuration structure. 







static inline void TRDC_SetMbcGlobalValid(TRDC_Type *base)

Sets the TRDC MBC(Memory Block Checkers) global valid. 
Once enabled, it will remain enabled until next reset.

Parameters:

base – TRDC peripheral base address. 







void TRDC_GetMbcHardwareConfig(TRDC_Type *base, trdc_slave_memory_hardware_config_t *config, uint8_t mbcIdx, uint8_t slvIdx)

Gets the hardware configuration of the one of two slave memories within each MBC(memory block checker). 

Parameters:

base – TRDC peripheral base address. 
config – Pointer to the structure to get the configuration. 
mbcIdx – MBC number. 
slvIdx – Slave number. 







void TRDC_MbcSetNseUpdateConfig(TRDC_Type *base, const trdc_mbc_nse_update_config_t *config, uint8_t mbcIdx)

Sets the NSR update configuration for one of the MBC instance. 
After set the NSE configuration, the configured memory area can be updateby NSE set/clear.

Parameters:

base – TRDC peripheral base address. 
config – Pointer to NSE update configuration structure. 
mbcIdx – MBC index. 







void TRDC_MbcWordNseSet(TRDC_Type *base, uint8_t mbcIdx, uint32_t bitMask)

Sets the NSE bits of the selected configuration words according to NSE update configuration. 
This function sets the NSE bits of the word for the configured regio, memory.

Parameters:

base – TRDC peripheral base address. 
mbcIdx – MBC index. 
bitMask – Mask of the bits whose NSE bits to set. 







void TRDC_MbcWordNseClear(TRDC_Type *base, uint8_t mbcIdx, uint32_t bitMask)

Clears the NSE bits of the selected configuration words according to NSE update configuration. 
This function sets the NSE bits of the word for the configured regio, memory.

Parameters:

base – TRDC peripheral base address. 
mbcIdx – MBC index. 
bitMask – Mask of the bits whose NSE bits to clear. 







void TRDC_MbcNseClearAll(TRDC_Type *base, uint8_t mbcIdx, uint16_t domainMask, uint8_t slave)

Clears all configuration words’ NSE bits of the selected domain and memory. 

Parameters:

base – TRDC peripheral base address. 
mbcIdx – MBC index. 
domainMask – Mask of the domains whose NSE bits to clear, 0b110 means clear domain 1&2. 
slaveMask – Mask of the slaves whose NSE bits to clear, 0x11 means clear all slave 0&1’s NSE bits. 







void TRDC_MbcSetMemoryAccessConfig(TRDC_Type *base, const trdc_memory_access_control_config_t *config, uint8_t mbcIdx, uint8_t rgdIdx)

Sets the memory access configuration for one of the region descriptor of one MBC. 
Example: Enable the secure operations and lock the configuration for MRC0 region 1.
trdc_memory_access_control_config_t config;

config.securePrivX = true;
config.securePrivW = true;
config.securePrivR = true;
config.lock = true;
TRDC_SetMbcMemoryAccess(TRDC, &config, 0, 1);



Parameters:

base – TRDC peripheral base address. 
config – Pointer to the configuration structure. 
mbcIdx – MBC index. 
rgdIdx – Region descriptor number. 







void TRDC_MbcSetMemoryBlockConfig(TRDC_Type *base, const trdc_mbc_memory_block_config_t *config)

Sets the configuration for one of the memory block per domain per MBC instnce. 
This function sets the configuration for one of the memory block, including the memory access control policy and nse enable.

Parameters:

base – TRDC peripheral base address. 
config – Pointer to memory block configuration structure. 







enum _trdc_did_sel

TRDC domain ID select method, the register bit TRDC_MDA_W0_0_DFMT0[DIDS], used for domain hit evaluation. 
Values:


enumerator kTRDC_DidMda

Use MDAn[2:0] as DID. 




enumerator kTRDC_DidInput

Use the input DID (DID_in) as DID. 




enumerator kTRDC_DidMdaAndInput

Use MDAn[2] concatenated with DID_in[1:0] as DID. 




enumerator kTRDC_DidReserved

Reserved. 






enum _trdc_secure_attr

TRDC secure attribute, the register bit TRDC_MDA_W0_0_DFMT0[SA], used for bus master domain assignment. 
Values:


enumerator kTRDC_ForceSecure

Force the bus attribute for this master to secure. 




enumerator kTRDC_ForceNonSecure

Force the bus attribute for this master to non-secure. 




enumerator kTRDC_MasterSecure

Use the bus master’s secure/nonsecure attribute directly. 




enumerator kTRDC_MasterSecure1

Use the bus master’s secure/nonsecure attribute directly. 






enum _trdc_pid_domain_hit_config

The configuration of domain hit evaluation of PID. 
Values:


enumerator kTRDC_pidDomainHitNone0

No PID is included in the domain hit evaluation. 




enumerator kTRDC_pidDomainHitNone1

No PID is included in the domain hit evaluation. 




enumerator kTRDC_pidDomainHitInclusive

The PID is included in the domain hit evaluation when (PID & ~PIDM). 




enumerator kTRDC_pidDomainHitExclusive

The PID is included in the domain hit evaluation when ~(PID & ~PIDM). 






enum _trdc_privilege_attr

TRDC privileged attribute, the register bit TRDC_MDA_W0_x_DFMT1[PA], used for non-processor bus master domain assignment. 
Values:


enumerator kTRDC_ForceUser

Force the bus attribute for this master to user. 




enumerator kTRDC_ForcePrivilege

Force the bus attribute for this master to privileged. 




enumerator kTRDC_MasterPrivilege

Use the bus master’s attribute directly. 




enumerator kTRDC_MasterPrivilege1

Use the bus master’s attribute directly. 






enum _trdc_pid_lock

PID lock configuration. 
Values:


enumerator kTRDC_PidUnlocked0

The PID value can be updated by any secure priviledged write. 




enumerator kTRDC_PidUnlocked1

The PID value can be updated by any secure priviledged write. 




enumerator kTRDC_PidUnlocked2

The PID value can be updated by any secure priviledged write from the bus master that first configured this register. 




enumerator kTRDC_PidLocked

The PID value is locked until next reset. 






enum _trdc_controller

TRDC controller definition for domain error check. Each TRDC instance may have different MRC or MBC count, call TRDC_GetHardwareConfig to get the actual count. 
Values:


enumerator kTRDC_MemBlockController0

Memory block checker 0. 




enumerator kTRDC_MemBlockController1

Memory block checker 1. 




enumerator kTRDC_MemBlockController2

Memory block checker 2. 




enumerator kTRDC_MemBlockController3

Memory block checker 3. 




enumerator kTRDC_MemRegionChecker0

Memory region checker 0. 




enumerator kTRDC_MemRegionChecker1

Memory region checker 1. 




enumerator kTRDC_MemRegionChecker2

Memory region checker 2. 




enumerator kTRDC_MemRegionChecker3

Memory region checker 3. 




enumerator kTRDC_MemRegionChecker4

Memory region checker 4. 




enumerator kTRDC_MemRegionChecker5

Memory region checker 5. 




enumerator kTRDC_MemRegionChecker6

Memory region checker 6. 






enum _trdc_error_state

TRDC domain error state definition TRDC_MBCn_DERR_W1[EST] or TRDC_MRCn_DERR_W1[EST]. 
Values:


enumerator kTRDC_ErrorStateNone

No access violation detected. 




enumerator kTRDC_ErrorStateNone1

No access violation detected. 




enumerator kTRDC_ErrorStateSingle

Single access violation detected. 




enumerator kTRDC_ErrorStateMulti

Multiple access violation detected. 






enum _trdc_error_attr

TRDC domain error attribute definition TRDC_MBCn_DERR_W1[EATR] or TRDC_MRCn_DERR_W1[EATR]. 
Values:


enumerator kTRDC_ErrorSecureUserInst

Secure user mode, instruction fetch access. 




enumerator kTRDC_ErrorSecureUserData

Secure user mode, data access. 




enumerator kTRDC_ErrorSecurePrivilegeInst

Secure privileged mode, instruction fetch access. 




enumerator kTRDC_ErrorSecurePrivilegeData

Secure privileged mode, data access. 




enumerator kTRDC_ErrorNonSecureUserInst

NonSecure user mode, instruction fetch access. 




enumerator kTRDC_ErrorNonSecureUserData

NonSecure user mode, data access. 




enumerator kTRDC_ErrorNonSecurePrivilegeInst

NonSecure privileged mode, instruction fetch access. 




enumerator kTRDC_ErrorNonSecurePrivilegeData

NonSecure privileged mode, data access. 






enum _trdc_error_type

TRDC domain error access type definition TRDC_DERR_W1_n[ERW]. 
Values:


enumerator kTRDC_ErrorTypeRead

Error occurs on read reference. 




enumerator kTRDC_ErrorTypeWrite

Error occurs on write reference. 






enum _trdc_region_descriptor

The region descriptor enumeration, used to form a mask to set/clear the NSE bits for one or several regions. 
Values:


enumerator kTRDC_RegionDescriptor0

Region descriptor 0. 




enumerator kTRDC_RegionDescriptor1

Region descriptor 1. 




enumerator kTRDC_RegionDescriptor2

Region descriptor 2. 




enumerator kTRDC_RegionDescriptor3

Region descriptor 3. 




enumerator kTRDC_RegionDescriptor4

Region descriptor 4. 




enumerator kTRDC_RegionDescriptor5

Region descriptor 5. 




enumerator kTRDC_RegionDescriptor6

Region descriptor 6. 




enumerator kTRDC_RegionDescriptor7

Region descriptor 7. 




enumerator kTRDC_RegionDescriptor8

Region descriptor 8. 




enumerator kTRDC_RegionDescriptor9

Region descriptor 9. 




enumerator kTRDC_RegionDescriptor10

Region descriptor 10. 




enumerator kTRDC_RegionDescriptor11

Region descriptor 11. 




enumerator kTRDC_RegionDescriptor12

Region descriptor 12. 




enumerator kTRDC_RegionDescriptor13

Region descriptor 13. 




enumerator kTRDC_RegionDescriptor14

Region descriptor 14. 




enumerator kTRDC_RegionDescriptor15

Region descriptor 15. 






enum _trdc_MRC_domain

The MRC domain enumeration, used to form a mask to enable/disable the update or clear all NSE bits of one or several domains. 
Values:


enumerator kTRDC_MrcDomain0

Domain 0. 




enumerator kTRDC_MrcDomain1

Domain 1. 




enumerator kTRDC_MrcDomain2

Domain 2. 




enumerator kTRDC_MrcDomain3

Domain 3. 




enumerator kTRDC_MrcDomain4

Domain 4. 




enumerator kTRDC_MrcDomain5

Domain 5. 




enumerator kTRDC_MrcDomain6

Domain 6. 




enumerator kTRDC_MrcDomain7

Domain 7. 




enumerator kTRDC_MrcDomain8

Domain 8. 




enumerator kTRDC_MrcDomain9

Domain 9. 




enumerator kTRDC_MrcDomain10

Domain 10. 




enumerator kTRDC_MrcDomain11

Domain 11. 




enumerator kTRDC_MrcDomain12

Domain 12. 




enumerator kTRDC_MrcDomain13

Domain 13. 




enumerator kTRDC_MrcDomain14

Domain 14. 




enumerator kTRDC_MrcDomain15

Domain 15. 






enum _trdc_MBC_domain

The MBC domain enumeration, used to form a mask to enable/disable the update or clear NSE bits of one or several domains. 
Values:


enumerator kTRDC_MbcDomain0

Domain 0. 




enumerator kTRDC_MbcDomain1

Domain 1. 




enumerator kTRDC_MbcDomain2

Domain 2. 




enumerator kTRDC_MbcDomain3

Domain 3. 




enumerator kTRDC_MbcDomain4

Domain 4. 




enumerator kTRDC_MbcDomain5

Domain 5. 




enumerator kTRDC_MbcDomain6

Domain 6. 




enumerator kTRDC_MbcDomain7

Domain 7. 






enum _trdc_MBC_memory

The MBC slave memory enumeration, used to form a mask to enable/disable the update or clear NSE bits of one or several memory block. 
Values:


enumerator kTRDC_MbcSlaveMemory0

Memory 0. 




enumerator kTRDC_MbcSlaveMemory1

Memory 1. 




enumerator kTRDC_MbcSlaveMemory2

Memory 2. 




enumerator kTRDC_MbcSlaveMemory3

Memory 3. 






enum _trdc_MBC_bit

The MBC bit enumeration, used to form a mask to set/clear configured words’ NSE. 
Values:


enumerator kTRDC_MbcBit0

Bit 0. 




enumerator kTRDC_MbcBit1

Bit 1. 




enumerator kTRDC_MbcBit2

Bit 2. 




enumerator kTRDC_MbcBit3

Bit 3. 




enumerator kTRDC_MbcBit4

Bit 4. 




enumerator kTRDC_MbcBit5

Bit 5. 




enumerator kTRDC_MbcBit6

Bit 6. 




enumerator kTRDC_MbcBit7

Bit 7. 




enumerator kTRDC_MbcBit8

Bit 8. 




enumerator kTRDC_MbcBit9

Bit 9. 




enumerator kTRDC_MbcBit10

Bit 10. 




enumerator kTRDC_MbcBit11

Bit 11. 




enumerator kTRDC_MbcBit12

Bit 12. 




enumerator kTRDC_MbcBit13

Bit 13. 




enumerator kTRDC_MbcBit14

Bit 14. 




enumerator kTRDC_MbcBit15

Bit 15. 




enumerator kTRDC_MbcBit16

Bit 16. 




enumerator kTRDC_MbcBit17

Bit 17. 




enumerator kTRDC_MbcBit18

Bit 18. 




enumerator kTRDC_MbcBit19

Bit 19. 




enumerator kTRDC_MbcBit20

Bit 20. 




enumerator kTRDC_MbcBit21

Bit 21. 




enumerator kTRDC_MbcBit22

Bit 22. 




enumerator kTRDC_MbcBit23

Bit 23. 




enumerator kTRDC_MbcBit24

Bit 24. 




enumerator kTRDC_MbcBit25

Bit 25. 




enumerator kTRDC_MbcBit26

Bit 26. 




enumerator kTRDC_MbcBit27

Bit 27. 




enumerator kTRDC_MbcBit28

Bit 28. 




enumerator kTRDC_MbcBit29

Bit 29. 




enumerator kTRDC_MbcBit30

Bit 30. 




enumerator kTRDC_MbcBit31

Bit 31. 






typedef struct _trdc_hardware_config trdc_hardware_config_t

TRDC hardware configuration. 




typedef struct _trdc_slave_memory_hardware_config trdc_slave_memory_hardware_config_t

Hardware configuration of the two slave memories within each MBC(memory block checker). 




typedef enum _trdc_did_sel trdc_did_sel_t

TRDC domain ID select method, the register bit TRDC_MDA_W0_0_DFMT0[DIDS], used for domain hit evaluation. 




typedef enum _trdc_secure_attr trdc_secure_attr_t

TRDC secure attribute, the register bit TRDC_MDA_W0_0_DFMT0[SA], used for bus master domain assignment. 




typedef enum _trdc_pid_domain_hit_config trdc_pid_domain_hit_config_t

The configuration of domain hit evaluation of PID. 




typedef struct _trdc_processor_domain_assignment trdc_processor_domain_assignment_t

Domain assignment for the processor bus master. 




typedef enum _trdc_privilege_attr trdc_privilege_attr_t

TRDC privileged attribute, the register bit TRDC_MDA_W0_x_DFMT1[PA], used for non-processor bus master domain assignment. 




typedef struct _trdc_non_processor_domain_assignment trdc_non_processor_domain_assignment_t

Domain assignment for the non-processor bus master. 




typedef enum _trdc_pid_lock trdc_pid_lock_t

PID lock configuration. 




typedef struct _trdc_pid_config trdc_pid_config_t

Process identifier(PID) configuration for processor cores. 




typedef struct _trdc_idau_config trdc_idau_config_t

IDAU(Implementation-Defined Attribution Unit) configuration for TZ-M function control. 




typedef struct _trdc_flw_config trdc_flw_config_t

FLW(Flash Logical Window) configuration. 




typedef enum _trdc_controller trdc_controller_t

TRDC controller definition for domain error check. Each TRDC instance may have different MRC or MBC count, call TRDC_GetHardwareConfig to get the actual count. 




typedef enum _trdc_error_state trdc_error_state_t

TRDC domain error state definition TRDC_MBCn_DERR_W1[EST] or TRDC_MRCn_DERR_W1[EST]. 




typedef enum _trdc_error_attr trdc_error_attr_t

TRDC domain error attribute definition TRDC_MBCn_DERR_W1[EATR] or TRDC_MRCn_DERR_W1[EATR]. 




typedef enum _trdc_error_type trdc_error_type_t

TRDC domain error access type definition TRDC_DERR_W1_n[ERW]. 




typedef struct _trdc_domain_error trdc_domain_error_t

TRDC domain error definition. 




typedef struct _trdc_memory_access_control_config trdc_memory_access_control_config_t

Memory access control configuration for MBC/MRC. 




typedef struct _trdc_mrc_region_descriptor_config trdc_mrc_region_descriptor_config_t

The configuration of each region descriptor per domain per MRC instance. 




typedef struct _trdc_mbc_nse_update_config trdc_mbc_nse_update_config_t

The configuration of MBC NSE update. 




typedef struct _trdc_mbc_memory_block_config trdc_mbc_memory_block_config_t

The configuration of each memory block per domain per MBC instance. 




FSL_TRDC_DRIVER_VERSION





struct _trdc_hardware_config


#include <fsl_trdc.h>
TRDC hardware configuration. 

Public Members


uint8_t masterNumber

Number of bus masters. 




uint8_t domainNumber

Number of domains. 




uint8_t mbcNumber

Number of MBCs. 




uint8_t mrcNumber

Number of MRCs. 







struct _trdc_slave_memory_hardware_config


#include <fsl_trdc.h>
Hardware configuration of the two slave memories within each MBC(memory block checker). 

Public Members


uint32_t blockNum

Number of blocks. 




uint32_t blockSize

Block size. 







struct _trdc_processor_domain_assignment


#include <fsl_trdc.h>
Domain assignment for the processor bus master. 

Public Members


uint32_t domainId

Domain ID. 




uint32_t domainIdSelect

Domain ID select method, see trdc_did_sel_t. 




uint32_t pidDomainHitConfig

The configuration of the domain hit evaluation for PID, see trdc_pid_domain_hit_config_t. 




uint32_t pidMask

The mask combined with PID, so multiple PID can be included as part of the domain hit determination. Set to 0 to disable. 




uint32_t secureAttr

Secure attribute, see trdc_secure_attr_t. 




uint32_t pid

The process identifier, combined with pidMask to form the domain hit determination. 




uint32_t __pad0__

Reserved. 




uint32_t lock

Lock the register. 




uint32_t __pad1__

Reserved. 







struct _trdc_non_processor_domain_assignment


#include <fsl_trdc.h>
Domain assignment for the non-processor bus master. 

Public Members


uint32_t domainId

Domain ID. 




uint32_t privilegeAttr

Privileged attribute, see trdc_privilege_attr_t. 




uint32_t secureAttr

Secure attribute, see trdc_secure_attr_t. 




uint32_t bypassDomainId

Bypass domain ID. 




uint32_t __pad0__

Reserved. 




uint32_t lock

Lock the register. 




uint32_t __pad1__

Reserved. 







struct _trdc_pid_config


#include <fsl_trdc.h>
Process identifier(PID) configuration for processor cores. 

Public Members


uint32_t pid

The process identifier of the executing task. The highest bit can be used to define secure/nonsecure attribute of the task. 




uint32_t __pad0__

Reserved. 




uint32_t lock

How to lock the register, see trdc_pid_lock_t. 




uint32_t __pad1__

Reserved. 







struct _trdc_idau_config


#include <fsl_trdc.h>
IDAU(Implementation-Defined Attribution Unit) configuration for TZ-M function control. 

Public Members


uint32_t __pad0__

Reserved. 




uint32_t lockSecureVTOR

Disable writes to secure VTOR(Vector Table Offset Register). 




uint32_t lockNonsecureVTOR

Disable writes to non-secure VTOR, Application interrupt and Reset Control Registers. 




uint32_t lockSecureMPU

Disable writes to secure MPU(Memory Protection Unit) from software or from a debug agent connected to the processor in Secure state. 




uint32_t lockNonsecureMPU

Disable writes to non-secure MPU(Memory Protection Unit) from software or from a debug agent connected to the processor. 




uint32_t lockSAU

Disable writes to SAU(Security Attribution Unit) registers. 




uint32_t __pad1__

Reserved. 







struct _trdc_flw_config


#include <fsl_trdc.h>
FLW(Flash Logical Window) configuration. 

Public Members


uint16_t blockCount

Block count of the Flash Logic Window in 32KByte blocks. 




uint32_t arrayBaseAddr

Flash array base address of the Flash Logical Window. 




bool lock

Disable writes to FLW registers. 




bool enable

Enable FLW function. 







struct _trdc_domain_error


#include <fsl_trdc.h>
TRDC domain error definition. 

Public Members


trdc_controller_t controller

Which controller captured access violation. 




uint32_t address

Access address that generated access violation. 




trdc_error_state_t errorState

Error state. 




trdc_error_attr_t errorAttr

Error attribute. 




trdc_error_type_t errorType

Error type. 




uint8_t errorPort

Error port. 




uint8_t domainId

Domain ID. 




uint8_t slaveMemoryIdx

The slave memory index. Only apply when violation in MBC. 







struct _trdc_memory_access_control_config


#include <fsl_trdc.h>
Memory access control configuration for MBC/MRC. 

Public Members


uint32_t nonsecureUsrX

Allow nonsecure user execute access. 




uint32_t nonsecureUsrW

Allow nonsecure user write access. 




uint32_t nonsecureUsrR

Allow nonsecure user read access. 




uint32_t __pad0__

Reserved. 




uint32_t nonsecurePrivX

Allow nonsecure privilege execute access. 




uint32_t nonsecurePrivW

Allow nonsecure privilege write access. 




uint32_t nonsecurePrivR

Allow nonsecure privilege read access. 




uint32_t __pad1__

Reserved. 




uint32_t secureUsrX

Allow secure user execute access. 




uint32_t secureUsrW

Allow secure user write access. 




uint32_t secureUsrR

Allow secure user read access. 




uint32_t __pad2__

Reserved. 




uint32_t securePrivX

Allownsecure privilege execute access. 




uint32_t securePrivW

Allownsecure privilege write access. 




uint32_t securePrivR

Allownsecure privilege read access. 




uint32_t __pad3__

Reserved. 




uint32_t lock

Lock the configuration until next reset, only apply to access control register 0. 







struct _trdc_mrc_region_descriptor_config


#include <fsl_trdc.h>
The configuration of each region descriptor per domain per MRC instance. 

Public Members


uint8_t memoryAccessControlSelect

Select one of the 8 access control policies for this region, for access cotrol policies see trdc_memory_access_control_config_t. 




uint32_t startAddr

Physical start address. 




bool valid

Lock the register. 




bool nseEnable

Enable non-secure accesses and disable secure accesses. 




uint32_t endAddr

Physical start address. 




uint8_t mrcIdx

The index of the MRC for this configuration to take effect. 




uint8_t domainIdx

The index of the domain for this configuration to take effect. 




uint8_t regionIdx

The index of the region for this configuration to take effect. 







struct _trdc_mbc_nse_update_config


#include <fsl_trdc.h>
The configuration of MBC NSE update. 

Public Members


uint32_t __pad0__

Reserved. 




uint32_t wordIdx

MBC configuration word index to be updated. 




uint32_t __pad1__

Reserved. 




uint32_t memorySelect

Bit mask of the selected memory to be updated. _trdc_MBC_memory. 




uint32_t __pad2__

Reserved. 




uint32_t domianSelect

Bit mask of the selected domain to be updated. _trdc_MBC_domain. 




uint32_t __pad3__

Reserved. 




uint32_t autoIncrement

Whether to increment the word index after current word is updated using this configuration. 







struct _trdc_mbc_memory_block_config


#include <fsl_trdc.h>
The configuration of each memory block per domain per MBC instance. 

Public Members


uint32_t memoryAccessControlSelect

Select one of the 8 access control policies for this memory block, for access cotrol policies see trdc_memory_access_control_config_t. 




uint32_t nseEnable

Enable non-secure accesses and disable secure accesses. 




uint32_t mbcIdx

The index of the MBC for this configuration to take effect. 




uint32_t domainIdx

The index of the domain for this configuration to take effect. 




uint32_t slaveMemoryIdx

The index of the slave memory for this configuration to take effect. 




uint32_t memoryBlockIdx

The index of the memory block for this configuration to take effect. 







Trdc_core#


typedef struct _TRDC_General_Type TRDC_General_Type

TRDC general configuration register definition. 




typedef struct _TRDC_FLW_Type TRDC_FLW_Type

TRDC flash logical control register definition. 




typedef struct _TRDC_DomainError_Type TRDC_DomainError_Type

TRDC domain error register definition. 




typedef struct _TRDC_DomainAssignment_Type TRDC_DomainAssignment_Type

TRDC master domain assignment register definition. 




typedef struct _TRDC_MBC_Type TRDC_MBC_Type

TRDC MBC control register definition. 




typedef struct _TRDC_MRC_Type TRDC_MRC_Type

TRDC MRC control register definition. MRC_DOM0_RGD_W[region][word]. 




TRDC_GENERAL_BASE(base)

TRDC base address convert macro. 




TRDC_FLW_BASE(base)





TRDC_DOMAIN_ERROR_BASE(base)





TRDC_DOMAIN_ASSIGNMENT_BASE(base)





TRDC_MBC_BASE(base, instance)





TRDC_MRC_BASE(base, instance)





struct _TRDC_General_Type


#include <fsl_trdc_core.h>
TRDC general configuration register definition. 

Public Members


__IO uint32_t TRDC_CR
TRDC Register, offset: 0x0 




__I uint32_t TRDC_HWCFG0
TRDC Hardware Configuration Register 0, offset: 0xF0 




__I uint32_t TRDC_HWCFG1
TRDC Hardware Configuration Register 1, offset: 0xF4 




__I uint32_t TRDC_HWCFG2
TRDC Hardware Configuration Register 2, offset: 0xF8 




__I uint32_t TRDC_HWCFG3
TRDC Hardware Configuration Register 3, offset: 0xFC 




__I uint8_t DACFG [8]
Domain Assignment Configuration Register, array offset: 0x100, array step: 0x1 




__IO uint32_t TRDC_IDAU_CR
TRDC IDAU Control Register, offset: 0x1C0 







struct _TRDC_FLW_Type


#include <fsl_trdc_core.h>
TRDC flash logical control register definition. 

Public Members


__IO uint32_t TRDC_FLW_CTL
TRDC FLW Control, offset: 0x1E0 




__I uint32_t TRDC_FLW_PBASE
TRDC FLW Physical Base, offset: 0x1E4 




__IO uint32_t TRDC_FLW_ABASE
TRDC FLW Array Base, offset: 0x1E8 




__IO uint32_t TRDC_FLW_BCNT
TRDC FLW Block Count, offset: 0x1EC 







struct _TRDC_DomainError_Type


#include <fsl_trdc_core.h>
TRDC domain error register definition. 

Public Members


__IO uint32_t TRDC_FDID
TRDC Fault Domain ID, offset: 0x1FC 




__I uint32_t TRDC_DERRLOC [16]
TRDC Domain Error Location Register, array offset: 0x200, array step: 0x4 







struct _TRDC_DomainAssignment_Type


#include <fsl_trdc_core.h>
TRDC master domain assignment register definition. 

Public Members


__IO uint32_t PID [8]
Process Identifier, array offset: 0x700, array step: 0x4 







struct _TRDC_MBC_Type


#include <fsl_trdc_core.h>
TRDC MBC control register definition. 

Public Members


__I uint32_t MBC_MEM_GLBCFG [4]
MBC Global Configuration Register, array offset: 0x10000, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_NSE_BLK_INDEX
MBC NonSecure Enable Block Index, array offset: 0x10010, array step: 0x2000 




__O uint32_t MBC_NSE_BLK_SET
MBC NonSecure Enable Block Set, array offset: 0x10014, array step: 0x2000 




__O uint32_t MBC_NSE_BLK_CLR
MBC NonSecure Enable Block Clear, array offset: 0x10018, array step: 0x2000 




__O uint32_t MBC_NSE_BLK_CLR_ALL
MBC NonSecure Enable Block Clear All, array offset: 0x1001C, array step: 0x2000 




__IO uint32_t MBC_MEMN_GLBAC [8]
MBC Global Access Control, array offset: 0x10020, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM0_MEM0_BLK_CFG_W [64]
MBC Memory Block Configuration Word, array offset: 0x10040, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM0_MEM0_BLK_NSE_W [16]
MBC Memory Block NonSecure Enable Word, array offset: 0x10140, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM0_MEM1_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x10180, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM0_MEM1_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x101A0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM0_MEM2_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x101A8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM0_MEM2_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x101C8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM0_MEM3_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x101D0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM0_MEM3_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x101F0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM1_MEM0_BLK_CFG_W [64]
MBC Memory Block Configuration Word, array offset: 0x10240, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM1_MEM0_BLK_NSE_W [16]
MBC Memory Block NonSecure Enable Word, array offset: 0x10340, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM1_MEM1_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x10380, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM1_MEM1_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x103A0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM1_MEM2_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x103A8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM1_MEM2_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x103C8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM1_MEM3_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x103D0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM1_MEM3_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x103F0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM2_MEM0_BLK_CFG_W [64]
MBC Memory Block Configuration Word, array offset: 0x10440, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM2_MEM0_BLK_NSE_W [16]
MBC Memory Block NonSecure Enable Word, array offset: 0x10540, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM2_MEM1_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x10580, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM2_MEM1_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x105A0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM2_MEM2_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x105A8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM2_MEM2_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x105C8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM2_MEM3_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x105D0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM2_MEM3_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x105F0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM3_MEM0_BLK_CFG_W [64]
MBC Memory Block Configuration Word, array offset: 0x10640, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM3_MEM0_BLK_NSE_W [16]
MBC Memory Block NonSecure Enable Word, array offset: 0x10740, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM3_MEM1_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x10780, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM3_MEM1_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x107A0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM3_MEM2_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x107A8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM3_MEM2_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x107C8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM3_MEM3_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x107D0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM3_MEM3_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x107F0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM4_MEM0_BLK_CFG_W [64]
MBC Memory Block Configuration Word, array offset: 0x10840, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM4_MEM0_BLK_NSE_W [16]
MBC Memory Block NonSecure Enable Word, array offset: 0x10940, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM4_MEM1_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x10980, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM4_MEM1_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x109A0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM4_MEM2_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x109A8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM4_MEM2_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x109C8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM4_MEM3_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x109D0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM4_MEM3_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x109F0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM5_MEM0_BLK_CFG_W [64]
MBC Memory Block Configuration Word, array offset: 0x10A40, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM5_MEM0_BLK_NSE_W [16]
MBC Memory Block NonSecure Enable Word, array offset: 0x10B40, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM5_MEM1_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x10B80, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM5_MEM1_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x10BA0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM5_MEM2_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x10BA8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM5_MEM2_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x10BC8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM5_MEM3_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x10BD0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM5_MEM3_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x10BF0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM6_MEM0_BLK_CFG_W [64]
MBC Memory Block Configuration Word, array offset: 0x10C40, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM6_MEM0_BLK_NSE_W [16]
MBC Memory Block NonSecure Enable Word, array offset: 0x10D40, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM6_MEM1_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x10D80, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM6_MEM1_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x10DA0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM6_MEM2_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x10DA8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM6_MEM2_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x10DC8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM6_MEM3_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x10DD0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM6_MEM3_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x10DF0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM7_MEM0_BLK_CFG_W [64]
MBC Memory Block Configuration Word, array offset: 0x10E40, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM7_MEM0_BLK_NSE_W [16]
MBC Memory Block NonSecure Enable Word, array offset: 0x10F40, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM7_MEM1_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x10F80, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM7_MEM1_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x10FA0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM7_MEM2_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x10FA8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM7_MEM2_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x10FC8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM7_MEM3_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x10FD0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM7_MEM3_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x10FF0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM8_MEM0_BLK_CFG_W [64]
MBC Memory Block Configuration Word, array offset: 0x11040, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM8_MEM0_BLK_NSE_W [16]
MBC Memory Block NonSecure Enable Word, array offset: 0x11140, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM8_MEM1_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x11180, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM8_MEM1_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x111A0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM8_MEM2_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x111A8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM8_MEM2_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x111C8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM8_MEM3_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x111D0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM8_MEM3_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x111F0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM9_MEM0_BLK_CFG_W [64]
MBC Memory Block Configuration Word, array offset: 0x11240, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM9_MEM0_BLK_NSE_W [16]
MBC Memory Block NonSecure Enable Word, array offset: 0x11340, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM9_MEM1_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x11380, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM9_MEM1_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x113A0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM9_MEM2_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x113A8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM9_MEM2_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x113C8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM9_MEM3_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x113D0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM9_MEM3_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x113F0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM10_MEM0_BLK_CFG_W [64]
MBC Memory Block Configuration Word, array offset: 0x11440, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM10_MEM0_BLK_NSE_W [16]
MBC Memory Block NonSecure Enable Word, array offset: 0x11540, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM10_MEM1_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x11580, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM10_MEM1_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x115A0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM10_MEM2_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x115A8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM10_MEM2_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x115C8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM10_MEM3_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x115D0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM10_MEM3_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x115F0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM11_MEM0_BLK_CFG_W [64]
MBC Memory Block Configuration Word, array offset: 0x11640, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM11_MEM0_BLK_NSE_W [16]
MBC Memory Block NonSecure Enable Word, array offset: 0x11740, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM11_MEM1_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x11780, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM11_MEM1_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x117A0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM11_MEM2_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x117A8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM11_MEM2_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x117C8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM11_MEM3_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x117D0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM11_MEM3_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x117F0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM12_MEM0_BLK_CFG_W [64]
MBC Memory Block Configuration Word, array offset: 0x11840, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM12_MEM0_BLK_NSE_W [16]
MBC Memory Block NonSecure Enable Word, array offset: 0x11940, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM12_MEM1_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x11980, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM12_MEM1_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x119A0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM12_MEM2_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x119A8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM12_MEM2_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x119C8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM12_MEM3_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x119D0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM12_MEM3_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x119F0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM13_MEM0_BLK_CFG_W [64]
MBC Memory Block Configuration Word, array offset: 0x11A40, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM13_MEM0_BLK_NSE_W [16]
MBC Memory Block NonSecure Enable Word, array offset: 0x11B40, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM13_MEM1_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x11B80, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM13_MEM1_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x11BA0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM13_MEM2_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x11BA8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM13_MEM2_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x11BC8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM13_MEM3_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x11BD0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM13_MEM3_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x11BF0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM14_MEM0_BLK_CFG_W [64]
MBC Memory Block Configuration Word, array offset: 0x11C40, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM14_MEM0_BLK_NSE_W [16]
MBC Memory Block NonSecure Enable Word, array offset: 0x11D40, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM14_MEM1_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x11D80, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM14_MEM1_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x11DA0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM14_MEM2_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x11DA8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM14_MEM2_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x11DC8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM14_MEM3_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x11DD0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM14_MEM3_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x11DF0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM15_MEM0_BLK_CFG_W [64]
MBC Memory Block Configuration Word, array offset: 0x11E40, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM15_MEM0_BLK_NSE_W [16]
MBC Memory Block NonSecure Enable Word, array offset: 0x11F40, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM15_MEM1_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x11F80, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM15_MEM1_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x11FA0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM15_MEM2_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x11FA8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM15_MEM2_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x11FC8, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM15_MEM3_BLK_CFG_W [8]
MBC Memory Block Configuration Word, array offset: 0x11FD0, array step: index*0x2000, index2*0x4 




__IO uint32_t MBC_DOM15_MEM3_BLK_NSE_W [2]
MBC Memory Block NonSecure Enable Word, array offset: 0x11FF0, array step: index*0x2000, index2*0x4 







struct _TRDC_MRC_Type


#include <fsl_trdc_core.h>
TRDC MRC control register definition. MRC_DOM0_RGD_W[region][word]. 

Public Members


__I uint32_t MRC_GLBCFG
MRC Global Configuration Register, array offset: 0x14000, array step: 0x1000 




__IO uint32_t MRC_NSE_RGN_INDIRECT
MRC NonSecure Enable Region Indirect, array offset: 0x14010, array step: 0x1000 




__O uint32_t MRC_NSE_RGN_SET
MRC NonSecure Enable Region Set, array offset: 0x14014, array step: 0x1000 




__O uint32_t MRC_NSE_RGN_CLR
MRC NonSecure Enable Region Clear, array offset: 0x14018, array step: 0x1000 




__O uint32_t MRC_NSE_RGN_CLR_ALL
MRC NonSecure Enable Region Clear All, array offset: 0x1401C, array step: 0x1000 




__IO uint32_t MRC_GLBAC [8]
MRC Global Access Control, array offset: 0x14020, array step: index*0x1000, index2*0x4 




__IO uint32_t MRC_DOM0_RGD_W [16][2]
MRC Region Descriptor Word 0..MRC Region Descriptor Word 1, array offset: 0x14040, array step: index*0x1000, index2*0x8, index3*0x4 




__IO uint32_t MRC_DOM0_RGD_NSE
MRC Region Descriptor NonSecure Enable, array offset: 0x140C0, array step: 0x1000 




__IO uint32_t MRC_DOM1_RGD_W [16][2]
MRC Region Descriptor Word 0..MRC Region Descriptor Word 1, array offset: 0x14140, array step: index*0x1000, index2*0x8, index3*0x4 




__IO uint32_t MRC_DOM1_RGD_NSE
MRC Region Descriptor NonSecure Enable, array offset: 0x141C0, array step: 0x1000 




__IO uint32_t MRC_DOM2_RGD_W [16][2]
MRC Region Descriptor Word 0..MRC Region Descriptor Word 1, array offset: 0x14240, array step: index*0x1000, index2*0x8, index3*0x4 




__IO uint32_t MRC_DOM2_RGD_NSE
MRC Region Descriptor NonSecure Enable, array offset: 0x142C0, array step: 0x1000 




__IO uint32_t MRC_DOM3_RGD_W [16][2]
MRC Region Descriptor Word 0..MRC Region Descriptor Word 1, array offset: 0x14340, array step: index*0x1000, index2*0x8, index3*0x4 




__IO uint32_t MRC_DOM3_RGD_NSE
MRC Region Descriptor NonSecure Enable, array offset: 0x143C0, array step: 0x1000 




__IO uint32_t MRC_DOM4_RGD_W [16][2]
MRC Region Descriptor Word 0..MRC Region Descriptor Word 1, array offset: 0x14440, array step: index*0x1000, index2*0x8, index3*0x4 




__IO uint32_t MRC_DOM4_RGD_NSE
MRC Region Descriptor NonSecure Enable, array offset: 0x144C0, array step: 0x1000 




__IO uint32_t MRC_DOM5_RGD_W [16][2]
MRC Region Descriptor Word 0..MRC Region Descriptor Word 1, array offset: 0x14540, array step: index*0x1000, index2*0x8, index3*0x4 




__IO uint32_t MRC_DOM5_RGD_NSE
MRC Region Descriptor NonSecure Enable, array offset: 0x145C0, array step: 0x1000 




__IO uint32_t MRC_DOM6_RGD_W [16][2]
MRC Region Descriptor Word 0..MRC Region Descriptor Word 1, array offset: 0x14640, array step: index*0x1000, index2*0x8, index3*0x4 




__IO uint32_t MRC_DOM6_RGD_NSE
MRC Region Descriptor NonSecure Enable, array offset: 0x146C0, array step: 0x1000 




__IO uint32_t MRC_DOM7_RGD_W [16][2]
MRC Region Descriptor Word 0..MRC Region Descriptor Word 1, array offset: 0x14740, array step: index*0x1000, index2*0x8, index3*0x4 




__IO uint32_t MRC_DOM7_RGD_NSE
MRC Region Descriptor NonSecure Enable, array offset: 0x147C0, array step: 0x1000 




__IO uint32_t MRC_DOM8_RGD_W [16][2]
MRC Region Descriptor Word 0..MRC Region Descriptor Word 1, array offset: 0x14840, array step: index*0x1000, index2*0x8, index3*0x4 




__IO uint32_t MRC_DOM8_RGD_NSE
MRC Region Descriptor NonSecure Enable, array offset: 0x148C0, array step: 0x1000 




__IO uint32_t MRC_DOM9_RGD_W [16][2]
MRC Region Descriptor Word 0..MRC Region Descriptor Word 1, array offset: 0x14940, array step: index*0x1000, index2*0x8, index3*0x4 




__IO uint32_t MRC_DOM9_RGD_NSE
MRC Region Descriptor NonSecure Enable, array offset: 0x149C0, array step: 0x1000 




__IO uint32_t MRC_DOM10_RGD_W [16][2]
MRC Region Descriptor Word 0..MRC Region Descriptor Word 1, array offset: 0x14A40, array step: index*0x1000, index2*0x8, index3*0x4 




__IO uint32_t MRC_DOM10_RGD_NSE
MRC Region Descriptor NonSecure Enable, array offset: 0x14AC0, array step: 0x1000 




__IO uint32_t MRC_DOM11_RGD_W [16][2]
MRC Region Descriptor Word 0..MRC Region Descriptor Word 1, array offset: 0x14B40, array step: index*0x1000, index2*0x8, index3*0x4 




__IO uint32_t MRC_DOM11_RGD_NSE
MRC Region Descriptor NonSecure Enable, array offset: 0x14BC0, array step: 0x1000 




__IO uint32_t MRC_DOM12_RGD_W [16][2]
MRC Region Descriptor Word 0..MRC Region Descriptor Word 1, array offset: 0x14C40, array step: index*0x1000, index2*0x8, index3*0x4 




__IO uint32_t MRC_DOM12_RGD_NSE
MRC Region Descriptor NonSecure Enable, array offset: 0x14CC0, array step: 0x1000 




__IO uint32_t MRC_DOM13_RGD_W [16][2]
MRC Region Descriptor Word 0..MRC Region Descriptor Word 1, array offset: 0x14D40, array step: index*0x1000, index2*0x8, index3*0x4 




__IO uint32_t MRC_DOM13_RGD_NSE
MRC Region Descriptor NonSecure Enable, array offset: 0x14DC0, array step: 0x1000 




__IO uint32_t MRC_DOM14_RGD_W [16][2]
MRC Region Descriptor Word 0..MRC Region Descriptor Word 1, array offset: 0x14E40, array step: index*0x1000, index2*0x8, index3*0x4 




__IO uint32_t MRC_DOM14_RGD_NSE
MRC Region Descriptor NonSecure Enable, array offset: 0x14EC0, array step: 0x1000 




__IO uint32_t MRC_DOM15_RGD_W [16][2]
MRC Region Descriptor Word 0..MRC Region Descriptor Word 1, array offset: 0x14F40, array step: index*0x1000, index2*0x8, index3*0x4 




__IO uint32_t MRC_DOM15_RGD_NSE
MRC Region Descriptor NonSecure Enable, array offset: 0x14FC0, array step: 0x1000 







struct MBC_DERR


Public Members


__I uint32_t W0
MBC Domain Error Word0 Register, array offset: 0x400, array step: 0x10 




__I uint32_t W1
MBC Domain Error Word1 Register, array offset: 0x404, array step: 0x10 




__O uint32_t W3
MBC Domain Error Word3 Register, array offset: 0x40C, array step: 0x10 







struct MRC_DERR


Public Members


__I uint32_t W0
MRC Domain Error Word0 Register, array offset: 0x480, array step: 0x10 




__I uint32_t W1
MRC Domain Error Word1 Register, array offset: 0x484, array step: 0x10 




__O uint32_t W3
MRC Domain Error Word3 Register, array offset: 0x48C, array step: 0x10 







union __unnamed73__


Public Members


struct _TRDC_DomainAssignment_Type MDA_DFMT0[8]





struct _TRDC_DomainAssignment_Type MDA_DFMT1[8]








struct MDA_DFMT0


Public Members


__IO uint32_t MDA_W_DFMT0 [8]
DAC Master Domain Assignment Register, array offset: 0x800, array step: index*0x20, index2*0x4 







struct MDA_DFMT1


Public Members


__IO uint32_t MDA_W_DFMT1 [1]
DAC Master Domain Assignment Register, array offset: 0x800, array step: index*0x20, index2*0x4 







Trdc_soc#


FSL_TRDC_SOC_DRIVER_VERSION

Driver version 2.0.0. 




TRDC_MBC_MEM_GLBCFG_NBLKS_MASK





TRDC_MBC_MEM_GLBCFG_SIZE_LOG2_MASK





TRDC_MBC_MEM_GLBCFG_SIZE_LOG2_SHIFT





TRDC_MBC_NSE_BLK_CLR_ALL_MEMSEL(x)





TRDC_MBC_NSE_BLK_CLR_ALL_DID_SEL(x)





FSL_FEATURE_TRDC_DOMAIN_COUNT

TRDC feature. 




TRDC_MBC_COUNT

TRDC base address convert macro. 




TRDC_MBC_OFFSET(x)

MBC register offset in TRDC_Type structure. 




TRDC_MBC_ARRAY_STEP

Offset between two MBC control block, useless if there is only one. 




FSL_COMPONENT_ID





TRNG: True Random Number Generator#


FSL_TRNG_DRIVER_VERSION

TRNG driver version 2.0.21. 
Current version: 2.0.21
Change log:

version 2.0.21

Added support for MCXC devices.


version 2.0.20

Added support for MCXA devices.


version 2.0.19

Added support for MCXA and MCXL.


version 2.0.18

TRNG health checks now done in software on RT5xx and RT6xx.


version 2.0.17

Added support for RT700.


version 2.0.16

Added support for Dual oscillator mode.


version 2.0.15

Changed TRNG_USER_CONFIG_DEFAULT_XXX values according to latest reccomended by design team.


version 2.0.14

add support for RW610 and RW612


version 2.0.13

After deepsleep it might return error, added clearing bits in TRNG_GetRandomData() and generating new entropy.
Modified reloading entropy in TRNG_GetRandomData(), for some data length it doesn’t reloading entropy correctly.


version 2.0.12

For KW34A4_SERIES, KW35A4_SERIES, KW36A4_SERIES set TRNG_USER_CONFIG_DEFAULT_OSC_DIV to kTRNG_RingOscDiv8.


version 2.0.11

Add clearing pending errors in TRNG_Init().


version 2.0.10

Fixed doxygen issues.


version 2.0.9

Fix HIS_CCM metrics issues.


version 2.0.8

For K32L2A41A_SERIES set TRNG_USER_CONFIG_DEFAULT_OSC_DIV to kTRNG_RingOscDiv4.


version 2.0.7

Fix MISRA 2004 issue rule 12.5.


version 2.0.6

For KW35Z4_SERIES set TRNG_USER_CONFIG_DEFAULT_OSC_DIV to kTRNG_RingOscDiv8.


version 2.0.5

Add possibility to define default TRNG configuration by device specific preprocessor macros for FRQMIN, FRQMAX and OSCDIV.


version 2.0.4

Fix MISRA-2012 issues.


Version 2.0.3

update TRNG_Init to restart entropy generation


Version 2.0.2

fix MISRA issues


Version 2.0.1

add support for KL8x and KL28Z
update default OSCDIV for K81 to divide by 2 








enum _trng_sample_mode

TRNG sample mode. Used by trng_config_t. 
Values:


enumerator kTRNG_SampleModeVonNeumann

Use von Neumann data in both Entropy shifter and Statistical Checker. 




enumerator kTRNG_SampleModeRaw

Use raw data into both Entropy shifter and Statistical Checker. 




enumerator kTRNG_SampleModeVonNeumannRaw

Use von Neumann data in Entropy shifter. Use raw data into Statistical Checker. 






enum _trng_clock_mode

TRNG clock mode. Used by trng_config_t. 
Values:


enumerator kTRNG_ClockModeRingOscillator

Ring oscillator is used to operate the TRNG (default). 




enumerator kTRNG_ClockModeSystem

System clock is used to operate the TRNG. This is for test use only, and indeterminate results may occur. 






enum _trng_ring_osc_div

TRNG ring oscillator divide. Used by trng_config_t. 
Values:


enumerator kTRNG_RingOscDiv0

Ring oscillator with no divide 




enumerator kTRNG_RingOscDiv2

Ring oscillator divided-by-2. 




enumerator kTRNG_RingOscDiv4

Ring oscillator divided-by-4. 




enumerator kTRNG_RingOscDiv8

Ring oscillator divided-by-8. 






enum trng_oscillator_mode_t

TRNG oscillator mode . Used by trng_config_t. 
Values:


enumerator kTRNG_SingleOscillatorModeOsc1

Single oscillator mode, using OSC1 (default) 




enumerator kTRNG_DualOscillatorMode

Dual oscillator mode 




enumerator kTRNG_SingleOscillatorModeOsc2

Single oscillator mode, using OSC2 






typedef enum _trng_sample_mode trng_sample_mode_t

TRNG sample mode. Used by trng_config_t. 




typedef enum _trng_clock_mode trng_clock_mode_t

TRNG clock mode. Used by trng_config_t. 




typedef enum _trng_ring_osc_div trng_ring_osc_div_t

TRNG ring oscillator divide. Used by trng_config_t. 




typedef enum trng_oscillator_mode_t trng_oscillator_mode_t

TRNG oscillator mode . Used by trng_config_t. 




typedef struct _trng_statistical_check_limit trng_statistical_check_limit_t

Data structure for definition of statistical check limits. Used by trng_config_t. 




typedef struct _trng_user_config trng_config_t

Data structure for the TRNG initialization. 
This structure initializes the TRNG by calling the TRNG_Init() function. It contains all TRNG configurations. 




status_t TRNG_GetDefaultConfig(trng_config_t *userConfig)

Initializes the user configuration structure to default values. 
This function initializes the configuration structure to default values. The default values are platform dependent.

Parameters:

userConfig – User configuration structure. 


Returns:
If successful, returns the kStatus_TRNG_Success. Otherwise, it returns an error. 






status_t TRNG_Init(TRNG_Type *base, const trng_config_t *userConfig)

Initializes the TRNG. 
This function initializes the TRNG. When called, the TRNG entropy generation starts immediately.

Parameters:

base – TRNG base address 
userConfig – Pointer to the initialization configuration structure. 


Returns:
If successful, returns the kStatus_TRNG_Success. Otherwise, it returns an error. 






void TRNG_Deinit(TRNG_Type *base)

Shuts down the TRNG. 
This function shuts down the TRNG.

Parameters:

base – TRNG base address. 







status_t TRNG_GetRandomData(TRNG_Type *base, void *data, size_t dataSize)

Gets random data. 
This function gets random data from the TRNG.

Parameters:

base – TRNG base address. 
data – Pointer address used to store random data. 
dataSize – Size of the buffer pointed by the data parameter. 


Returns:
random data 






struct _trng_statistical_check_limit


#include <fsl_trng.h>
Data structure for definition of statistical check limits. Used by trng_config_t. 

Public Members


uint32_t maximum

Maximum limit. 




int32_t minimum

Minimum limit. 







struct _trng_user_config


#include <fsl_trng.h>
Data structure for the TRNG initialization. 
This structure initializes the TRNG by calling the TRNG_Init() function. It contains all TRNG configurations. 

Public Members


bool lock

Disable programmability of TRNG registers. 




trng_clock_mode_t clockMode

Clock mode used to operate TRNG. 




trng_ring_osc_div_t ringOscDiv

Ring oscillator divide used by TRNG. 




trng_sample_mode_t sampleMode

Sample mode of the TRNG ring oscillator. 




trng_oscillator_mode_t oscillatorMode

TRNG oscillator mode . 




trng_ring_osc_div_t ringOsc2Div

Divider used for Ring oscillator 2. 




uint16_t entropyDelay

Entropy Delay. Defines the length (in system clocks) of each Entropy sample taken. 




uint16_t sampleSize

Sample Size. Defines the total number of Entropy samples that will be taken during Entropy generation. 




uint16_t sparseBitLimit

Sparse Bit Limit which defines the maximum number of consecutive samples that may be discarded before an error is generated. This limit is used only for during von Neumann sampling (enabled by TRNG_HAL_SetSampleMode()). Samples are discarded if two consecutive raw samples are both 0 or both 1. If this discarding occurs for a long period of time, it indicates that there is insufficient Entropy. 




uint8_t retryCount

Retry count. It defines the number of times a statistical check may fails during the TRNG Entropy Generation before generating an error. 




uint8_t longRunMaxLimit

Largest allowable number of consecutive samples of all 1, or all 0, that is allowed during the Entropy generation. 




trng_statistical_check_limit_t monobitLimit

Maximum and minimum limits for statistical check of number of ones/zero detected during entropy generation. 




trng_statistical_check_limit_t runBit1Limit

Maximum and minimum limits for statistical check of number of runs of length 1 detected during entropy generation. 




trng_statistical_check_limit_t runBit2Limit

Maximum and minimum limits for statistical check of number of runs of length 2 detected during entropy generation. 




trng_statistical_check_limit_t runBit3Limit

Maximum and minimum limits for statistical check of number of runs of length 3 detected during entropy generation. 




trng_statistical_check_limit_t runBit4Limit

Maximum and minimum limits for statistical check of number of runs of length 4 detected during entropy generation. 




trng_statistical_check_limit_t runBit5Limit

Maximum and minimum limits for statistical check of number of runs of length 5 detected during entropy generation. 




trng_statistical_check_limit_t runBit6PlusLimit

Maximum and minimum limits for statistical check of number of runs of length 6 or more detected during entropy generation. 




trng_statistical_check_limit_t pokerLimit

Maximum and minimum limits for statistical check of “Poker Test”. 




trng_statistical_check_limit_t frequencyCountLimit

Maximum and minimum limits for statistical check of entropy sample frequency count. 







UTICK: MictoTick Timer Driver#


void UTICK_Init(UTICK_Type *base)

Initializes an UTICK by turning its bus clock on. 




void UTICK_Deinit(UTICK_Type *base)

Deinitializes a UTICK instance. 
This function shuts down Utick bus clock

Parameters:

base – UTICK peripheral base address. 







uint32_t UTICK_GetStatusFlags(UTICK_Type *base)

Get Status Flags. 
This returns the status flag

Parameters:

base – UTICK peripheral base address. 


Returns:
status register value 






void UTICK_ClearStatusFlags(UTICK_Type *base)

Clear Status Interrupt Flags. 
This clears intr status flag

Parameters:

base – UTICK peripheral base address. 


Returns:
none 






void UTICK_SetTick(UTICK_Type *base, utick_mode_t mode, uint32_t count, utick_callback_t cb)

Starts UTICK. 
This function starts a repeat/onetime countdown with an optional callback

Parameters:

base – UTICK peripheral base address. 
mode – UTICK timer mode (ie kUTICK_onetime or kUTICK_repeat) 
count – UTICK timer mode (ie kUTICK_onetime or kUTICK_repeat) 
cb – UTICK callback (can be left as NULL if none, otherwise should be a void func(void)) 


Returns:
none 






void UTICK_HandleIRQ(UTICK_Type *base, utick_callback_t cb)

UTICK Interrupt Service Handler. 
This function handles the interrupt and refers to the callback array in the driver to callback user (as per request in UTICK_SetTick()). if no user callback is scheduled, the interrupt will simply be cleared.

Parameters:

base – UTICK peripheral base address. 
cb – callback scheduled for this instance of UTICK 


Returns:
none 






FSL_UTICK_DRIVER_VERSION

UTICK driver version 2.0.5. 




enum _utick_mode

UTICK timer operational mode. 
Values:


enumerator kUTICK_Onetime

Trigger once 




enumerator kUTICK_Repeat

Trigger repeatedly 






typedef enum _utick_mode utick_mode_t

UTICK timer operational mode. 




typedef void (*utick_callback_t)(void)

UTICK callback function. 




VREF: Voltage Reference Driver#


void VREF_Init(VREF_Type *base, const vref_config_t *config)

Enables the clock gate and configures the VREF module according to the configuration structure. 
This function must be called before calling all other VREF driver functions, read/write registers, and configurations with user-defined settings. The example below shows how to set up vref_config_t parameters and how to call the VREF_Init function by passing in these parameters. 
vref_config_t vrefConfig;
VREF_GetDefaultConfig(&vrefConfig);
vrefConfig.bufferMode = kVREF_ModeHighPowerBuffer;
VREF_Init(VREF, &vrefConfig);




Parameters:

base – VREF peripheral address. 
config – Pointer to the configuration structure. 







void VREF_Deinit(VREF_Type *base)

Stops and disables the clock for the VREF module. 
This function should be called to shut down the module. This is an example. 
vref_config_t vrefUserConfig;
VREF_GetDefaultConfig(&vrefUserConfig);
VREF_Init(VREF, &vrefUserConfig);
...
VREF_Deinit(VREF);




Parameters:

base – VREF peripheral address. 







void VREF_GetDefaultConfig(vref_config_t *config)

Initializes the VREF configuration structure. 
This function initializes the VREF configuration structure to default values. This is an example. 
config->bufferMode = kVREF_ModeHighPowerBuffer;
config->enableInternalVoltageRegulator = true;
config->enableChopOscillator           = true;
config->enableHCBandgap                = true;
config->enableCurvatureCompensation    = true;
config->enableLowPowerBuff             = true;




Parameters:

config – Pointer to the initialization structure. 







void VREF_SetVrefTrimVal(VREF_Type *base, uint8_t trimValue)

Sets a TRIM value for the accurate 1.0V bandgap output. 
This function sets a TRIM value for the reference voltage. It will trim the accurate 1.0V bandgap by 0.5mV each step.

Parameters:

base – VREF peripheral address. 
trimValue – Value of the trim register to set the output reference voltage (maximum 0x3F (6-bit)). 







void VREF_SetTrim21Val(VREF_Type *base, uint8_t trim21Value)

Sets a TRIM value for the accurate buffered VREF output. 
This function sets a TRIM value for the reference voltage. If buffer mode be set to other values (Buf21 enabled), it will trim the VREF_OUT by 0.1V each step from 1.0V to 2.1V.

Note
When Buf21 is enabled, the value of UTRIM[TRIM2V1] should be ranged from 0b0000 to 0b1011 in order to trim the output voltage from 1.0V to 2.1V, other values will make the VREF_OUT to default value, 1.0V.


Parameters:

base – VREF peripheral address. 
trim21Value – Value of the trim register to set the output reference voltage (maximum 0xF (4-bit)). 







uint8_t VREF_GetVrefTrimVal(VREF_Type *base)

Reads the trim value. 
This function gets the TRIM value from the UTRIM register. It reads UTRIM[VREFTRIM] (13:8)

Parameters:

base – VREF peripheral address. 


Returns:
6-bit value of trim setting. 






uint8_t VREF_GetTrim21Val(VREF_Type *base)

Reads the VREF 2.1V trim value. 
This function gets the TRIM value from the UTRIM register. It reads UTRIM[TRIM2V1] (3:0),

Parameters:

base – VREF peripheral address. 


Returns:
4-bit value of trim setting. 






static inline void VREF_SetAdcNegChannelRef(VREF_Type *base, bool enable)

Decides whether to enable the ADC negative channel to receive the reference voltage. 

Parameters:

base – VREF peripheral address. 
enable – Enable/disable ADC negative channel reference voltage.

true Enable ADC negative channel reference voltage.
false Disable ADC negative channel reference voltage. 









static inline void VREF_SetAdcPosChannelRef(VREF_Type *base, bool enable)

Decides whether to enable the ADC positive channel to receive the reference voltage. 

Parameters:

base – VREF peripheral address. 
enable – Enable/disable ADC positive channel reference voltage.

true Enable ADC positive channel reference voltage.
false Disable ADC positive channel reference voltage. 









FSL_VREF_DRIVER_VERSION

Version 2.5.0. 




enum _vref_buffer_mode

VREF buffer modes. 
Values:


enumerator kVREF_ModeBandgapOnly

Bandgap enabled/standby. 




enumerator kVREF_ModeLowPowerBuffer

Low-power buffer mode enabled 




enumerator kVREF_ModeHighPowerBuffer

High-power buffer mode enabled 






typedef enum _vref_buffer_mode vref_buffer_mode_t

VREF buffer modes. 




typedef struct _vref_config vref_config_t

The description structure for the VREF module. 




struct _vref_config


#include <fsl_vref.h>
The description structure for the VREF module. 

Public Members


vref_buffer_mode_t bufferMode

Buffer mode selection 




bool enableInternalVoltageRegulator

Provide additional supply noise rejection. 




bool enableChopOscillator

Enable Chop oscillator. 




bool enableHCBandgap

Enable High-Accurate bandgap. 




bool enableCurvatureCompensation

Enable second order curvature compensation. 




bool enableLowPowerBuff

Provides bias current for other peripherals. 







WAKETIMER: WAKETIMER Driver#


void WAKETIMER_Init(WAKETIMER_Type *base, const waketimer_config_t *config)

Initializes an WAKETIMER. 
This function initializes the WAKETIMER.

Parameters:

base – WAKETIMER peripheral base address. 
config – Pointer to the user configuration structure. 







void WAKETIMER_Deinit(WAKETIMER_Type *base)

Deinitializes a WAKETIMER instance. 
This function deinitialize the WAKETIMER.

Parameters:

base – WAKETIMER peripheral base address. 







void WAKETIMER_GetDefaultConfig(waketimer_config_t *config)

Fills in the WAKETIMER configuration structure with the default settings. 
The default values are: 
config->enableInterrupt = true;
config->enableOSCDivide = true;
config->callback        = NULL;


 

Parameters:

config – Pointer to the user configuration structure. 







void WAKETIMER_EnableInterrupts(WAKETIMER_Type *base, uint32_t mask)

Enables the selected WAKETIMER interrupts. 

Parameters:

base – WAKETIMER peripheral base address 
mask – Mask value for interrupt events. See to _waketimer_interrupt_enable







void WAKETIMER_DisableInterrupts(WAKETIMER_Type *base, uint32_t mask)

Enables the selected WAKETIMER interrupts. 

Parameters:

base – WAKETIMER peripheral base address 
mask – Mask value for interrupt events. See to _waketimer_interrupt_enable







void WAKETIMER_ClearStatusFlags(WAKETIMER_Type *base, uint32_t mask)

Clear Status Interrupt Flag. 
This clears intrrupt status flag. Currently, only match interrupt flag can be cleared.

Parameters:

base – WAKETIMER peripheral base address. 
mask – Mask value for flags to be cleared. See to _waketimer_status_flags. 


Returns:
none 






void WAKETIMER_SetCallback(WAKETIMER_Type *base, waketimer_callback_t callback)

Receive noticification when waketime countdown. 
If the interrupt for the waketime countdown is enabled, then a callback can be registered which will be invoked when the event is triggered

Parameters:

base – WAKETIMER peripheral base address 
callback – Function to invoke when the event is triggered 







static inline void WAKETIMER_HaltTimer(WAKETIMER_Type *base)

Halt and clear timer counter. 
This halt and clear timer counter.

Parameters:

base – WAKETIMER peripheral base address. 


Returns:
none 






static inline void WAKETIMER_StartTimer(WAKETIMER_Type *base, uint32_t value)

Set timer counter. 
This set the timer counter and start the timer countdown.

Parameters:

base – WAKETIMER peripheral base address. 
value – countdown value. 


Returns:
none 






uint32_t WAKETIMER_GetCurrentTimerValue(WAKETIMER_Type *base)

Get current timer count value from WAKETIMER. 
This function will get a decimal timer count value. The RAW value of timer count is gray code format, will be translated to decimal data internally.

Parameters:

base – WAKETIMER peripheral base address. 


Returns:
Value of WAKETIMER which will be formated to decimal value. 






FSL_WAKETIMER_DRIVER_VERSION

WAKETIMER driver version. 




enum _waketimer_status_flags

WAKETIMER status flags. 
Values:


enumerator kWAKETIMER_WakeFlag

Wake Timer Status Flag, sets wake timer has timed out. 






enum _waketimer_interrupt_enable

Define interrupt switchers of the module. 
Values:


enumerator kWAKETIMER_WakeInterruptEnable

Generate interrupt requests when WAKE_FLAG is asserted. 






typedef void (*waketimer_callback_t)(void)

waketimer callback function. 




typedef struct _waketimer_config waketimer_config_t

WAKETIMER configuration structure. 
This structure holds the configuration settings for the WAKETIMER peripheral. To initialize this structure to reasonable defaults, call the WAKETIMER_GetDefaultConfig() function and pass a pointer to the configuration structure instance.
The configuration structure can be made constant so as to reside in flash. 




struct _waketimer_config


#include <fsl_waketimer.h>
WAKETIMER configuration structure. 
This structure holds the configuration settings for the WAKETIMER peripheral. To initialize this structure to reasonable defaults, call the WAKETIMER_GetDefaultConfig() function and pass a pointer to the configuration structure instance.
The configuration structure can be made constant so as to reside in flash. 

Public Members


bool enableOSCDivide

true: Enable OSC Divide. false: Disable OSC Divide. 




bool enableInterrupt

true: Enable interrupt. false: Disable interrupt. 




waketimer_callback_t callback

timer countdown callback. 







WUU: Wakeup Unit driver#


void WUU_SetExternalWakeUpPinsConfig(WUU_Type *base, uint8_t pinIndex, const wuu_external_wakeup_pin_config_t *config)

Enables and Configs External WakeUp Pins. 
This function enables/disables the external pin as wakeup input. What’s more this function configs pins options, including edge detection wakeup event and operate mode.

Parameters:

base – MUU peripheral base address. 
pinIndex – The index of the external input pin. See Reference Manual for the details. 
config – Pointer to wuu_external_wakeup_pin_config_t structure. 







void WUU_ClearExternalWakeupPinsConfig(WUU_Type *base, uint8_t pinIndex)

Disable and clear external wakeup pin settings. 

Parameters:

base – MUU peripheral base address. 
pinIndex – The index of the external input pin. 







static inline uint32_t WUU_GetExternalWakeUpPinsFlag(WUU_Type *base)

Gets External Wakeup pin flags. 
This function return the external wakeup pin flags.

Parameters:

base – WUU peripheral base address. 


Returns:
Wakeup flags for all external wakeup pins. 






static inline void WUU_ClearExternalWakeUpPinsFlag(WUU_Type *base, uint32_t mask)

Clears External WakeUp Pin flags. 
This function clears external wakeup pins flags based on the mask.

Parameters:

base – WUU peripheral base address. 
mask – The mask of Wakeup pin index to be cleared. 







void WUU_SetInternalWakeUpModulesConfig(WUU_Type *base, uint8_t moduleIndex, wuu_internal_wakeup_module_event_t event)

Config Internal modules’ event as the wake up soures. 
This function configs the internal modules event as the wake up sources.

Parameters:

base – WUU peripheral base address. 
moduleIndex – The selected internal module. See the Reference Manual for the details. 
event – Select interrupt or DMA/Trigger of the internal module as the wake up source. 







void WUU_ClearInternalWakeUpModulesConfig(WUU_Type *base, uint8_t moduleIndex, wuu_internal_wakeup_module_event_t event)

Disable an on-chip internal modules’ event as the wakeup sources. 

Parameters:

base – WUU peripheral base address. 
moduleIndex – The selected internal module. See the Reference Manual for the details. 
event – The event(interrupt or DMA/trigger) of the internal module to disable. 







void WUU_SetPinFilterConfig(WUU_Type *base, uint8_t filterIndex, const wuu_pin_filter_config_t *config)

Configs and Enables Pin filters. 
This function configs Pin filter, including pin select, filer operate mode filer wakeup event and filter edge detection.

Parameters:

base – WUU peripheral base address. 
filterIndex – The index of the pin filer. 
config – Pointer to wuu_pin_filter_config_t structure. 







bool WUU_GetPinFilterFlag(WUU_Type *base, uint8_t filterIndex)

Gets the pin filter configuration. 
This function gets the pin filter flag.

Parameters:

base – WUU peripheral base address. 
filterIndex – A pin filter index, which starts from 1. 


Returns:
True if the flag is a source of the existing low-leakage power mode. 






void WUU_ClearPinFilterFlag(WUU_Type *base, uint8_t filterIndex)

Clears the pin filter configuration. 
This function clears the pin filter flag.

Parameters:

base – WUU peripheral base address. 
filterIndex – A pin filter index to clear the flag, starting from 1. 







bool WUU_GetExternalWakeupPinFlag(WUU_Type *base, uint32_t pinIndex)

brief Gets the external wakeup source flag.
This function checks the external pin flag to detect whether the MCU is woken up by the specific pin.
param base WUU peripheral base address. param pinIndex A pin index, which starts from 0. return True if the specific pin is a wakeup source. 




void WUU_ClearExternalWakeupPinFlag(WUU_Type *base, uint32_t pinIndex)

brief Clears the external wakeup source flag.
This function clears the external wakeup source flag for a specific pin.
param base WUU peripheral base address. param pinIndex A pin index, which starts from 0. 




FSL_WUU_DRIVER_VERSION

Defines WUU driver version 2.4.2. 




enum _wuu_external_pin_edge_detection

External WakeUp pin edge detection enumeration. 
Values:


enumerator kWUU_ExternalPinDisable

External input Pin disabled as wake up input. 




enumerator kWUU_ExternalPinRisingEdge

External input Pin enabled with the rising edge detection. 




enumerator kWUU_ExternalPinFallingEdge

External input Pin enabled with the falling edge detection. 




enumerator kWUU_ExternalPinAnyEdge

External input Pin enabled with any change detection. 






enum _wuu_external_wakeup_pin_event

External input wake up pin event enumeration. 
Values:


enumerator kWUU_ExternalPinInterrupt

External input Pin configured as interrupt. 




enumerator kWUU_ExternalPinDMARequest

External input Pin configured as DMA request. 




enumerator kWUU_ExternalPinTriggerEvent

External input Pin configured as Trigger event. 






enum _wuu_external_wakeup_pin_mode

External input wake up pin mode enumeration. 
Values:


enumerator kWUU_ExternalPinActiveDSPD

External input Pin is active only during Deep Sleep/Power Down Mode. NOTE: This enumerations has been deprecated, please switch to kWUU_ExternalPinActiveLowLeakage. 




enumerator kWUU_ExternalPinActiveLowLeakageMode

External input Pin is active only during low-leakage power modes. 




enumerator kWUU_ExternalPinActiveAlways

External input Pin is active during all power modes. 






enum _wuu_internal_wakeup_module_event

Internal module wake up event enumeration. 
Values:


enumerator kWUU_InternalModuleInterrupt

Internal modules’ interrupt as a wakeup source. 




enumerator kWUU_InternalModuleDMATrigger

Internal modules’ DMA/Trigger as a wakeup source. 






enum _wuu_filter_edge

Pin filter edge enumeration. 
Values:


enumerator kWUU_FilterDisabled

Filter disabled. 




enumerator kWUU_FilterPosedgeEnable

Filter posedge detect enabled. 




enumerator kWUU_FilterNegedgeEnable

Filter negedge detect enabled. 




enumerator kWUU_FilterAnyEdge

Filter any edge detect enabled. 






enum _wuu_filter_event

Pin Filter event enumeration. 
Values:


enumerator kWUU_FilterInterrupt

Filter output configured as interrupt. 




enumerator kWUU_FilterDMARequest

Filter output configured as DMA request. 




enumerator kWUU_FilterTriggerEvent

Filter output configured as Trigger event. 






enum _wuu_filter_mode

Pin filter mode enumeration. 
Values:


enumerator kWUU_FilterActiveDSPD

External input pin filter is active only during Deep Sleep/Power Down Mode. NOTE: This enumerations has been deprecated, please switch to kWUU_FilterActiveLowLeakage. 




enumerator kWUU_FilterActiveLowLeakageMode

External input pin filter is active only during low-leakage power modes. 




enumerator kWUU_FilterActiveAlways

External input Pin filter is active during all power modes. 






typedef enum _wuu_external_pin_edge_detection wuu_external_pin_edge_detection_t

External WakeUp pin edge detection enumeration. 




typedef enum _wuu_external_wakeup_pin_event wuu_external_wakeup_pin_event_t

External input wake up pin event enumeration. 




typedef enum _wuu_external_wakeup_pin_mode wuu_external_wakeup_pin_mode_t

External input wake up pin mode enumeration. 




typedef enum _wuu_internal_wakeup_module_event wuu_internal_wakeup_module_event_t

Internal module wake up event enumeration. 




typedef enum _wuu_filter_edge wuu_filter_edge_t

Pin filter edge enumeration. 




typedef enum _wuu_filter_event wuu_filter_event_t

Pin Filter event enumeration. 




typedef enum _wuu_filter_mode wuu_filter_mode_t

Pin filter mode enumeration. 




typedef struct _wuu_external_wakeup_pin_config wuu_external_wakeup_pin_config_t

External WakeUp pin configuration. 




typedef struct _wuu_pin_filter_config wuu_pin_filter_config_t

Pin Filter configuration. 




struct _wuu_external_wakeup_pin_config


#include <fsl_wuu.h>
External WakeUp pin configuration. 

Public Members


wuu_external_pin_edge_detection_t edge

External Input pin edge detection. 




wuu_external_wakeup_pin_event_t event

External Input wakeup Pin event 




wuu_external_wakeup_pin_mode_t mode

External Input wakeup Pin operate mode. 







struct _wuu_pin_filter_config


#include <fsl_wuu.h>
Pin Filter configuration. 

Public Members


uint32_t pinIndex

The index of wakeup pin to be muxxed into filter. 




wuu_filter_edge_t edge

The edge of the pin digital filter. 




wuu_filter_event_t event

The event of the filter output. 




wuu_filter_mode_t mode

The mode of the filter operate. 







WWDT: Windowed Watchdog Timer Driver#


void WWDT_GetDefaultConfig(wwdt_config_t *config)

Initializes WWDT configure structure. 
This function initializes the WWDT configure structure to default value. The default value are: 
config->enableWwdt = true;
config->enableWatchdogReset = false;
config->enableWatchdogProtect = false;
config->enableLockOscillator = false;
config->windowValue = 0xFFFFFFU;
config->timeoutValue = 0xFFFFFFU;
config->warningValue = 0;




See also
wwdt_config_t



Parameters:

config – Pointer to WWDT config structure. 







void WWDT_Init(WWDT_Type *base, const wwdt_config_t *config)

Initializes the WWDT. 
This function initializes the WWDT. When called, the WWDT runs according to the configuration.
Example: 
wwdt_config_t config;
WWDT_GetDefaultConfig(&config);
config.timeoutValue = 0x7ffU;
WWDT_Init(wwdt_base,&config);




Parameters:

base – WWDT peripheral base address 
config – The configuration of WWDT 







void WWDT_Deinit(WWDT_Type *base)

Shuts down the WWDT. 
This function shuts down the WWDT.

Parameters:

base – WWDT peripheral base address 







static inline void WWDT_Enable(WWDT_Type *base)

Enables the WWDT module. 
This function write value into WWDT_MOD register to enable the WWDT, it is a write-once bit; once this bit is set to one and a watchdog feed is performed, the watchdog timer will run permanently.

Parameters:

base – WWDT peripheral base address 







static inline void WWDT_Disable(WWDT_Type *base)

Disables the WWDT module. 


Deprecated:
Do not use this function. It will be deleted in next release version, for once the bit field of WDEN written with a 1, it can not be re-written with a 0.



This function write value into WWDT_MOD register to disable the WWDT.

Parameters:

base – WWDT peripheral base address 







static inline uint32_t WWDT_GetStatusFlags(WWDT_Type *base)

Gets all WWDT status flags. 
This function gets all status flags.
Example for getting Timeout Flag: 
uint32_t status;
status = WWDT_GetStatusFlags(wwdt_base) & kWWDT_TimeoutFlag;


 

Parameters:

base – WWDT peripheral base address 


Returns:
The status flags. This is the logical OR of members of the enumeration _wwdt_status_flags_t






void WWDT_ClearStatusFlags(WWDT_Type *base, uint32_t mask)

Clear WWDT flag. 
This function clears WWDT status flag.
Example for clearing warning flag: 
WWDT_ClearStatusFlags(wwdt_base, kWWDT_WarningFlag);


 

Parameters:

base – WWDT peripheral base address 
mask – The status flags to clear. This is a logical OR of members of the enumeration _wwdt_status_flags_t







static inline void WWDT_SetWarningValue(WWDT_Type *base, uint32_t warningValue)

Set the WWDT warning value. 
The WDWARNINT register determines the watchdog timer counter value that will generate a watchdog interrupt. When the watchdog timer counter is no longer greater than the value defined by WARNINT, an interrupt will be generated after the subsequent WDCLK.

Parameters:

base – WWDT peripheral base address 
warningValue – WWDT warning value. 







static inline void WWDT_SetTimeoutValue(WWDT_Type *base, uint32_t timeoutCount)

Set the WWDT timeout value. 
This function sets the timeout value. Every time a feed sequence occurs the value in the TC register is loaded into the Watchdog timer. Writing a value below 0xFF will cause 0xFF to be loaded into the TC register. Thus the minimum time-out interval is TWDCLK*256*4. If enableWatchdogProtect flag is true in wwdt_config_t config structure, any attempt to change the timeout value before the watchdog counter is below the warning and window values will cause a watchdog reset and set the WDTOF flag.

Parameters:

base – WWDT peripheral base address 
timeoutCount – WWDT timeout value, count of WWDT clock tick. 







static inline void WWDT_SetWindowValue(WWDT_Type *base, uint32_t windowValue)

Sets the WWDT window value. 
The WINDOW register determines the highest TV value allowed when a watchdog feed is performed. If a feed sequence occurs when timer value is greater than the value in WINDOW, a watchdog event will occur. To disable windowing, set windowValue to 0xFFFFFF (maximum possible timer value) so windowing is not in effect.

Parameters:

base – WWDT peripheral base address 
windowValue – WWDT window value. 







void WWDT_Refresh(WWDT_Type *base)

Refreshes the WWDT timer. 
This function feeds the WWDT. This function should be called before WWDT timer is in timeout. Otherwise, a reset is asserted.

Parameters:

base – WWDT peripheral base address 







FSL_WWDT_DRIVER_VERSION

Defines WWDT driver version. 




WWDT_FIRST_WORD_OF_REFRESH

First word of refresh sequence 




WWDT_SECOND_WORD_OF_REFRESH

Second word of refresh sequence 




enum _wwdt_status_flags_t

WWDT status flags. 
This structure contains the WWDT status flags for use in the WWDT functions. 
Values:


enumerator kWWDT_TimeoutFlag

Time-out flag, set when the timer times out 




enumerator kWWDT_WarningFlag

Warning interrupt flag, set when timer is below the value WDWARNINT 






typedef struct _wwdt_config wwdt_config_t

Describes WWDT configuration structure. 




struct _wwdt_config


#include <fsl_wwdt.h>
Describes WWDT configuration structure. 

Public Members


bool enableWwdt

Enables or disables WWDT 




bool enableWatchdogReset

true: Watchdog timeout will cause a chip reset false: Watchdog timeout will not cause a chip reset 




bool enableWatchdogProtect

true: Enable watchdog protect i.e timeout value can only be changed after counter is below warning & window values false: Disable watchdog protect; timeout value can be changed at any time 




uint32_t windowValue

Window value, set this to 0xFFFFFF if windowing is not in effect 




uint32_t timeoutValue

Timeout value 




uint32_t warningValue

Watchdog time counter value that will generate a warning interrupt. Set this to 0 for no warning 




uint32_t clockFreq_Hz

Watchdog clock source frequency.

MCXA577

Contents

MCXA577#

AOI: Crossbar AND/OR/INVERT Driver#

CDOG#

Clock Driver#

CRC: Cyclic Redundancy Check Driver#

CTIMER: Standard counter/timers#

DAC: Digital-to-Analog Converter Driver#

eDMA: Enhanced Direct Memory Access (eDMA) Controller Driver#

eDMA core Driver#

eDMA soc Driver#

EIM: error injection module#

ERM: error recording module#

eSPI: Enhanced Serial Peripheral Interface#

EWM: External Watchdog Monitor Driver#

FGPIO Driver#

FLASH Driver#

FlexIO: FlexIO Driver#

FlexIO Driver#

FlexIO eDMA I2S Driver#

FlexIO eDMA MCU Interface LCD Driver#

FlexIO eDMA SPI Driver#

FlexIO eDMA UART Driver#

FlexIO I2C Master Driver#

FlexIO I2S Driver#

FlexIO MCU Interface LCD Driver#

FlexIO SPI Driver#

FlexIO UART Driver#

FLEXSPI: Flexible Serial Peripheral Interface Driver#

FLEXSPI eDMA Driver#

FREQME: Frequency Measurement#

GLIKEY#

GLIKEY#

GPIO: General-Purpose Input/Output Driver#

GPIO Driver#

I3C: I3C Driver#

I3C Common Driver#

I3C Master Driver#

I3C Master DMA Driver#

I3C Slave Driver#

I3C Slave DMA Driver#

INPUTMUX: Input Multiplexing Driver#

KB Driver#

Common Driver#

LPADC: 12-bit SAR Analog-to-Digital Converter Driver#

Lpc_freqme#

LPI2C: Low Power Inter-Integrated Circuit Driver#

LPI2C Master Driver#

LPI2C Master DMA Driver#

LPI2C Slave Driver#

LPSPI: Low Power Serial Peripheral Interface#

LPSPI Peripheral driver#

LPSPI eDMA Driver#

LPTMR: Low-Power Timer#

LPUART: Low Power Universal Asynchronous Receiver/Transmitter Driver#

LPUART Driver#

LPUART eDMA Driver#

Mcx_enet#

ENET: Ethernet Driver#

MCX_SPC: System Power Control driver#

NBOOT Driver#

This type defines status return values used by NBOOT functions that are not easily#

OSTIMER: OS Event Timer Driver#

PORT: Port Control and Interrupts#

Reset Driver#

ROMAPI Driver#

Runbootloader#

RUNBOOTLOADER Driver#

MCXN SMARTDMA Firmware#

TENBASET_PHY: 10BASE-T1S Digital PHY Driver#

TRDC: Trusted Resource Domain Controller#

Trdc_core#

Trdc_soc#

TRNG: True Random Number Generator#

UTICK: MictoTick Timer Driver#

VREF: Voltage Reference Driver#

WAKETIMER: WAKETIMER Driver#

WUU: Wakeup Unit driver#

WWDT: Windowed Watchdog Timer Driver#