Getting Started with Package

Table of Contents

• Overview
• MCUXpresso SDK board support package folders
  • Example application structure
  • Locating example application source files
• Run a demo using MCUXpresso IDE
  • Select the workspace location
  • Build an example application
  • Run an example application
  • Build a multicore example application
  • Run a multicore example application
  • Run applications via JLink Debug Interface
• Run a demo using IAR
  • Changes on IAR debugging support after 25.03.00
    • Update to latest IAR version
    • Necessary Change in your IAR installation (<= 9.60.3)
  • Build an example application
  • Run an example application
  • Build and run a multicore example application
  • Run applications via JLink debug interface
• Run a demo using Keil MDK/μVision
  • Install CMSIS device pack
  • Build an example application
  • Run an example application
  • Build a multicore example application
  • Run a multicore example application
  • Run applications via JLink debug interface
• Run a demo using Arm GCC
  • Set up toolchain
    • Install GCC Arm Embedded tool chain
    • Install MinGW (only required on Windows OS)
    • Add a system environment variable for ARMGCC_DIR
    • Install CMake
  • Build an example application
  • Run an example application
  • Build and run a multicore example application
• Bootable image generation
  • Use SPT tool to boot cm33 image
  • Use SPT tool and multicore_trigger image to kick off cm7 binary image
    • CM7 XIP image runs from external FLASH, and multicore_trigger CM33 image runs from internal RAM
    • CM7 binary image runs from internal TCM, and multicore_trigger CM33 image runs from external FLASH
  • RAW/POR image switch
    • IAR settings for image type switch
    • ARMGCC settings for image type switch
    • MDK setting for image type switch
    • MCUxpresso settings for image type switch
  • Use Secure Provisiong Tool to erase flash
• MCUXpresso configuration tools
• How to determine COM port
• Default debug interfaces
• Note about the source code in the document