Touchlink command events#
The events that can be generated for Touchlink are listed and described below (the enumerations are defined in the structure teCLD_ZllCommission_Command, shown in Section 44.9.1).
Event |
Description |
|---|---|
E_CLD_COMMISSION_CMD_SCAN_REQ |
A Scan Request has been received (by server) |
E_CLD_COMMISSION_CMD_SCAN_RSP |
A Scan Response has been received (by client) |
E_CLD_COMMISSION_CMD_DEVICE_INFO_REQ |
A Device Information Request has been received (by server) |
E_CLD_COMMISSION_CMD_DEVICE_INFO_RSP |
A Device Information Response has been received (by client) |
E_CLD_COMMISSION_CMD_IDENTIFY_REQ |
An Identify Request has been received (by server) |
E_CLD_COMMISSION_CMD_FACTORY_RESET_REQ |
A Reset To Factory New Request has been received (by server) |
E_CLD_COMMISSION_CMD_NETWORK_START_REQ |
A Network Start Request has been received (by server) |
E_CLD_COMMISSION_CMD_NETWORK_START_RSP |
A Network Start Response has been received (by cli-ent) |
E_CLD_COMMISSION_CMD_NETWORK_JOIN_ |
ROUTER_REQ
|A Network Join Router Request has been received (by server)| |E_CLD_COMMISSION_CMD_NETWORK_JOIN_
ROUTER_RSP
|A Network Join Router Response has been received (by client)| |E_CLD_COMMISSION_CMD_NETWORK_JOIN_
END_DEVICE_REQ
|A Network Join End Device Request has been received (by server)| |E_CLD_COMMISSION_CMD_NETWORK_JOIN_
END_DEVICE_RSP
|A Network Join End Device Response has been received (by client)| |E_CLD_COMMISSION_CMD_NETWORK_UPDATE_REQ|A Network Update Request has been received (by server)|
Parent topic:Touchlink Commissioning events